phonelib 0.6.5 → 0.6.6

data/data/libphonenumber/cpp/src/phonenumbers/utf/unilib.cc

@@ -1,68 +0,0 @@
-/**
- * Copyright 2010 Google Inc.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-// Author: Shawn Ligocki
-
-#include "phonenumbers/utf/unilib.h"
-
-#include "phonenumbers/base/basictypes.h"
-#include "phonenumbers/utf/utf.h"
-
-namespace i18n {
-namespace phonenumbers {
-namespace UniLib {
-
-namespace {
-
-// MOE: start_strip
-// MOE: end_strip
-// Codepoints not allowed for interchange are:
-//   C0 (ASCII) controls: U+0000 to U+001F excluding Space (SP, U+0020),
-//       Horizontal Tab (HT, U+0009), Line-Feed (LF, U+000A),
-//       Form Feed (FF, U+000C) and Carriage-Return (CR, U+000D)
-//   C1 controls: U+007F to U+009F
-//   Surrogates: U+D800 to U+DFFF
-//   Non-characters: U+FDD0 to U+FDEF and U+xxFFFE to U+xxFFFF for all xx
-inline bool IsInterchangeValidCodepoint(char32 c) {
-  return !((c >= 0x00 && c <= 0x08) || c == 0x0B || (c >= 0x0E && c <= 0x1F) ||
-           (c >= 0x7F && c <= 0x9F) ||
-           (c >= 0xD800 && c <= 0xDFFF) ||
-           (c >= 0xFDD0 && c <= 0xFDEF) || (c&0xFFFE) == 0xFFFE);
-}
-
-}  // namespace
-
-int SpanInterchangeValid(const char* begin, int byte_length) {
-  Rune rune;
-  const char* p = begin;
-  const char* end = begin + byte_length;
-  while (p < end) {
-    int bytes_consumed = charntorune(&rune, p, end - p);
-    // We want to accept Runeerror == U+FFFD as a valid char, but it is used
-    // by chartorune to indicate error. Luckily, the real codepoint is size 3
-    // while errors return bytes_consumed <= 1.
-    if ((rune == Runeerror && bytes_consumed <= 1) ||
-        !IsInterchangeValidCodepoint(rune)) {
-      break;  // Found
-    }
-    p += bytes_consumed;
-  }
-  return p - begin;
-}
-
-}  // namespace UniLib
-}  // namespace phonenumbers
-}  // namespace i18n

data/data/libphonenumber/cpp/src/phonenumbers/utf/unilib.h

@@ -1,99 +0,0 @@
-/**
- * Copyright 2010 Google Inc.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-// Routines to do manipulation of Unicode characters or text
-//
-// The StructurallyValid routines accept buffers of arbitrary bytes.
-// For CoerceToStructurallyValid(), the input buffer and output buffers may
-// point to exactly the same memory.
-//
-// In all other cases, the UTF-8 string must be structurally valid and
-// have all codepoints in the range  U+0000 to U+D7FF or U+E000 to U+10FFFF.
-// Debug builds take a fatal error for invalid UTF-8 input.
-// The input and output buffers may not overlap at all.
-//
-// The char32 routines are here only for convenience; they convert to UTF-8
-// internally and use the UTF-8 routines.
-
-#ifndef UTIL_UTF8_UNILIB_H__
-#define UTIL_UTF8_UNILIB_H__
-
-#include <string>
-#include "phonenumbers/base/basictypes.h"
-
-namespace i18n {
-namespace phonenumbers {
-namespace UniLib {
-
-// Returns true unless a surrogate code point
-inline bool IsValidCodepoint(char32 c) {
-  // In the range [0, 0xD800) or [0xE000, 0x10FFFF]
-  return (static_cast<uint32>(c) < 0xD800)
-    || (c >= 0xE000 && c <= 0x10FFFF);
-}
-
-// Table of UTF-8 character lengths, based on first byte
-static const unsigned char kUTF8LenTbl[256] = {
-  1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1,
-  1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1,
-  1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1,
-  1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1,
-
-  1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1,
-  1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1,
-  2,2,2,2,2,2,2,2, 2,2,2,2,2,2,2,2, 2,2,2,2,2,2,2,2, 2,2,2,2,2,2,2,2,
-  3,3,3,3,3,3,3,3, 3,3,3,3,3,3,3,3, 4,4,4,4,4,4,4,4, 4,4,4,4,4,4,4,4
-};
-
-// Return length of a single UTF-8 source character
-inline int OneCharLen(const char* src) {
-  return kUTF8LenTbl[*reinterpret_cast<const uint8*>(src)];
-}
-
-// Return length of a single UTF-8 source character
-inline int OneCharLen(const uint8* src) {
-  return kUTF8LenTbl[*src];
-}
-
-// Return true if this byte is a trailing UTF-8 byte (10xx xxxx)
-inline bool IsTrailByte(char x) {
-  // return (x & 0xC0) == 0x80;
-  // Since trail bytes are always in [0x80, 0xBF], we can optimize:
-  return static_cast<signed char>(x) < -0x40;
-}
-
-// Returns the length in bytes of the prefix of src that is all
-//  interchange valid UTF-8
-int SpanInterchangeValid(const char* src, int byte_length);
-inline int SpanInterchangeValid(const std::string& src) {
-  return SpanInterchangeValid(src.data(), src.size());
-}
-
-// Returns true if the source is all interchange valid UTF-8
-// "Interchange valid" is a stronger than structurally valid --
-// no C0 or C1 control codes (other than CR LF HT FF) and no non-characters.
-inline bool IsInterchangeValid(const char* src, int byte_length) {
-  return (byte_length == SpanInterchangeValid(src, byte_length));
-}
-inline bool IsInterchangeValid(const std::string& src) {
-  return IsInterchangeValid(src.data(), src.size());
-}
-
-}  // namespace UniLib
-}  // namespace phonenumbers
-}  // namespace i18n
-
-#endif  // UTIL_UTF8_PUBLIC_UNILIB_H_

data/data/libphonenumber/cpp/src/phonenumbers/utf/utf.h

@@ -1,240 +0,0 @@
-/*
- * The authors of this software are Rob Pike and Ken Thompson.
- *              Copyright (c) 1998-2002 by Lucent Technologies.
- *              Portions Copyright (c) 2009 The Go Authors.  All rights reserved.
- * Permission to use, copy, modify, and distribute this software for any
- * purpose without fee is hereby granted, provided that this entire notice
- * is included in all copies of any software which is or includes a copy
- * or modification of this software and in all copies of the supporting
- * documentation for such software.
- * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED
- * WARRANTY.  IN PARTICULAR, NEITHER THE AUTHORS NOR LUCENT TECHNOLOGIES MAKE ANY
- * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY
- * OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
- */
-
-#ifndef _UTFH_
-#define _UTFH_ 1
-
-typedef unsigned int Rune;	/* Code-point values in Unicode 4.0 are 21 bits wide.*/
-
-enum
-{
-  UTFmax	= 4,		/* maximum bytes per rune */
-  Runesync	= 0x80,		/* cannot represent part of a UTF sequence (<) */
-  Runeself	= 0x80,		/* rune and UTF sequences are the same (<) */
-  Runeerror	= 0xFFFD,	/* decoding error in UTF */
-  Runemax	= 0x10FFFF,	/* maximum rune value */
-};
-
-#ifdef	__cplusplus
-extern "C" {
-#endif
-
-/*
- * rune routines
- */
-
-/*
- * These routines were written by Rob Pike and Ken Thompson
- * and first appeared in Plan 9.
- * SEE ALSO
- * utf (7)
- * tcs (1)
-*/
-
-// runetochar copies (encodes) one rune, pointed to by r, to at most
-// UTFmax bytes starting at s and returns the number of bytes generated.
-
-int runetochar(char* s, const Rune* r);
-
-
-// chartorune copies (decodes) at most UTFmax bytes starting at s to
-// one rune, pointed to by r, and returns the number of bytes consumed.
-// If the input is not exactly in UTF format, chartorune will set *r
-// to Runeerror and return 1.
-//
-// Note: There is no special case for a "null-terminated" string. A
-// string whose first byte has the value 0 is the UTF8 encoding of the
-// Unicode value 0 (i.e., ASCII NULL). A byte value of 0 is illegal
-// anywhere else in a UTF sequence.
-
-int chartorune(Rune* r, const char* s);
-
-
-// charntorune is like chartorune, except that it will access at most
-// n bytes of s.  If the UTF sequence is incomplete within n bytes,
-// charntorune will set *r to Runeerror and return 0. If it is complete
-// but not in UTF format, it will set *r to Runeerror and return 1.
-//
-// Added 2004-09-24 by Wei-Hwa Huang
-
-int charntorune(Rune* r, const char* s, int n);
-
-// isvalidcharntorune(str, n, r, consumed)
-// is a convenience function that calls "*consumed = charntorune(r, str, n)"
-// and returns an int (logically boolean) indicating whether the first
-// n bytes of str was a valid and complete UTF sequence.
-
-int isvalidcharntorune(const char* str, int n, Rune* r, int* consumed);
-
-// runelen returns the number of bytes required to convert r into UTF.
-
-int runelen(Rune r);
-
-
-// runenlen returns the number of bytes required to convert the n
-// runes pointed to by r into UTF.
-
-int runenlen(const Rune* r, int n);
-
-
-// fullrune returns 1 if the string s of length n is long enough to be
-// decoded by chartorune, and 0 otherwise. This does not guarantee
-// that the string contains a legal UTF encoding. This routine is used
-// by programs that obtain input one byte at a time and need to know
-// when a full rune has arrived.
-
-int fullrune(const char* s, int n);
-
-// The following routines are analogous to the corresponding string
-// routines with "utf" substituted for "str", and "rune" substituted
-// for "chr".
-
-// utflen returns the number of runes that are represented by the UTF
-// string s. (cf. strlen)
-
-int utflen(const char* s);
-
-
-// utfnlen returns the number of complete runes that are represented
-// by the first n bytes of the UTF string s. If the last few bytes of
-// the string contain an incompletely coded rune, utfnlen will not
-// count them; in this way, it differs from utflen, which includes
-// every byte of the string. (cf. strnlen)
-
-int utfnlen(const char* s, long n);
-
-
-// utfrune returns a pointer to the first occurrence of rune r in the
-// UTF string s, or 0 if r does not occur in the string.  The NULL
-// byte terminating a string is considered to be part of the string s.
-// (cf. strchr)
-
-/*const*/ char* utfrune(const char* s, Rune r);
-
-
-// utfrrune returns a pointer to the last occurrence of rune r in the
-// UTF string s, or 0 if r does not occur in the string.  The NULL
-// byte terminating a string is considered to be part of the string s.
-// (cf. strrchr)
-
-/*const*/ char* utfrrune(const char* s, Rune r);
-
-
-// utfutf returns a pointer to the first occurrence of the UTF string
-// s2 as a UTF substring of s1, or 0 if there is none. If s2 is the
-// null string, utfutf returns s1. (cf. strstr)
-
-const char* utfutf(const char* s1, const char* s2);
-
-
-// utfecpy copies UTF sequences until a null sequence has been copied,
-// but writes no sequences beyond es1.  If any sequences are copied,
-// s1 is terminated by a null sequence, and a pointer to that sequence
-// is returned.  Otherwise, the original s1 is returned. (cf. strecpy)
-
-char* utfecpy(char *s1, char *es1, const char *s2);
-
-
-
-// These functions are rune-string analogues of the corresponding
-// functions in strcat (3).
-//
-// These routines first appeared in Plan 9.
-// SEE ALSO
-// memmove (3)
-// rune (3)
-// strcat (2)
-//
-// BUGS: The outcome of overlapping moves varies among implementations.
-
-Rune* runestrcat(Rune* s1, const Rune* s2);
-Rune* runestrncat(Rune* s1, const Rune* s2, long n);
-
-const Rune* runestrchr(const Rune* s, Rune c);
-
-int runestrcmp(const Rune* s1, const Rune* s2);
-int runestrncmp(const Rune* s1, const Rune* s2, long n);
-
-Rune* runestrcpy(Rune* s1, const Rune* s2);
-Rune* runestrncpy(Rune* s1, const Rune* s2, long n);
-Rune* runestrecpy(Rune* s1, Rune* es1, const Rune* s2);
-
-Rune* runestrdup(const Rune* s);
-
-const Rune* runestrrchr(const Rune* s, Rune c);
-long runestrlen(const Rune* s);
-const Rune* runestrstr(const Rune* s1, const Rune* s2);
-
-
-
-// The following routines test types and modify cases for Unicode
-// characters.  Unicode defines some characters as letters and
-// specifies three cases: upper, lower, and title.  Mappings among the
-// cases are also defined, although they are not exhaustive: some
-// upper case letters have no lower case mapping, and so on.  Unicode
-// also defines several character properties, a subset of which are
-// checked by these routines.  These routines are based on Unicode
-// version 3.0.0.
-//
-// NOTE: The routines are implemented in C, so the boolean functions
-// (e.g., isupperrune) return 0 for false and 1 for true.
-//
-//
-// toupperrune, tolowerrune, and totitlerune are the Unicode case
-// mappings. These routines return the character unchanged if it has
-// no defined mapping.
-
-Rune toupperrune(Rune r);
-Rune tolowerrune(Rune r);
-Rune totitlerune(Rune r);
-
-
-// isupperrune tests for upper case characters, including Unicode
-// upper case letters and targets of the toupper mapping. islowerrune
-// and istitlerune are defined analogously.
-
-int isupperrune(Rune r);
-int islowerrune(Rune r);
-int istitlerune(Rune r);
-
-
-// isalpharune tests for Unicode letters; this includes ideographs in
-// addition to alphabetic characters.
-
-int isalpharune(Rune r);
-
-
-// isdigitrune tests for digits. Non-digit numbers, such as Roman
-// numerals, are not included.
-
-int isdigitrune(Rune r);
-
-
-// isspacerune tests for whitespace characters, including "C" locale
-// whitespace, Unicode defined whitespace, and the "zero-width
-// non-break space" character.
-
-int isspacerune(Rune r);
-
-
-// (The comments in this file were copied from the manpage files rune.3,
-// isalpharune.3, and runestrcat.3. Some formatting changes were also made
-// to conform to Google style. /JRM 11/11/05)
-
-#ifdef	__cplusplus
-}
-#endif
-
-#endif

data/data/libphonenumber/cpp/src/phonenumbers/utf/utfdef.h

@@ -1,27 +0,0 @@
-/*
- * The authors of this software are Rob Pike and Ken Thompson.
- *              Copyright (c) 1998-2002 by Lucent Technologies.
- * Permission to use, copy, modify, and distribute this software for any
- * purpose without fee is hereby granted, provided that this entire notice
- * is included in all copies of any software which is or includes a copy
- * or modification of this software and in all copies of the supporting
- * documentation for such software.
- * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED
- * WARRANTY.  IN PARTICULAR, NEITHER THE AUTHORS NOR LUCENT TECHNOLOGIES MAKE ANY
- * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY
- * OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
- */
-
-#define uchar _utfuchar
-#define ushort _utfushort
-#define uint _utfuint
-#define ulong _utfulong
-#define vlong _utfvlong
-#define uvlong _utfuvlong
-
-typedef unsigned char		uchar;
-typedef unsigned short		ushort;
-typedef unsigned int		uint;
-typedef unsigned long		ulong;
-
-#define nelem(x) (sizeof(x)/sizeof((x)[0]))

data/data/libphonenumber/cpp/test/phonenumbers/asyoutypeformatter_test.cc

@@ -1,1237 +0,0 @@
-// Copyright (C) 2011 The Libphonenumber Authors
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-// http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-
-// Unit tests for asyoutypeformatter.cc, ported from AsYouTypeFormatterTest.java
-//
-// Note that these tests use the test metadata, not the normal metadata file,
-// so should not be used for regression test purposes - these tests are
-// illustrative only and test functionality.
-
-#include "phonenumbers/asyoutypeformatter.h"
-
-#include <gtest/gtest.h>
-
-#include "phonenumbers/base/logging.h"
-#include "phonenumbers/base/memory/scoped_ptr.h"
-#include "phonenumbers/default_logger.h"
-#include "phonenumbers/phonenumberutil.h"
-#include "phonenumbers/test_util.h"
-
-namespace i18n {
-namespace phonenumbers {
-
-class PhoneMetadata;
-
-class AsYouTypeFormatterTest : public testing::Test {
- protected:
-  AsYouTypeFormatterTest() : phone_util_(*PhoneNumberUtil::GetInstance()) {
-    PhoneNumberUtil::GetInstance()->SetLogger(new StdoutLogger());
-  }
-
-  const PhoneMetadata* GetCurrentMetadata() const {
-    return formatter_->current_metadata_;
-  }
-
-  const string& GetExtractedNationalPrefix() const {
-    return formatter_->GetExtractedNationalPrefix();
-  }
-
-  int ConvertUnicodeStringPosition(const UnicodeString& s, int pos) const {
-    return AsYouTypeFormatter::ConvertUnicodeStringPosition(s, pos);
-  }
-
-  const PhoneNumberUtil& phone_util_;
-  scoped_ptr<AsYouTypeFormatter> formatter_;
-  string result_;
-
- private:
-  DISALLOW_COPY_AND_ASSIGN(AsYouTypeFormatterTest);
-};
-
-TEST_F(AsYouTypeFormatterTest, ConvertUnicodeStringPosition) {
-  EXPECT_EQ(-1, ConvertUnicodeStringPosition(UnicodeString("12345"), 10));
-  EXPECT_EQ(3, ConvertUnicodeStringPosition(UnicodeString("12345"), 3));
-  EXPECT_EQ(0, ConvertUnicodeStringPosition(
-      UnicodeString("\xEF\xBC\x95" /* "５" */), 0));
-  EXPECT_EQ(4, ConvertUnicodeStringPosition(
-      UnicodeString("0\xEF\xBC\x95""3" /* "0５3" */), 2));
-  EXPECT_EQ(5, ConvertUnicodeStringPosition(
-      UnicodeString("0\xEF\xBC\x95""3" /* "0５3" */), 3));
-}
-
-TEST_F(AsYouTypeFormatterTest, Constructor) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::US()));
-
-  EXPECT_TRUE(GetCurrentMetadata() != NULL);
-}
-
-TEST_F(AsYouTypeFormatterTest, InvalidPlusSign) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::GetUnknown()));
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+4", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("+48 ", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+48 8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+48 88", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+48 88 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+48 88 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+48 88 123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+48 88 123 1", formatter_->InputDigit('1', &result_));
-  // A plus sign can only appear at the beginning of the number; otherwise, no
-  // formatting is applied.
-  EXPECT_EQ("+48881231+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+48881231+2", formatter_->InputDigit('2', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, TooLongNumberMatchingMultipleLeadingDigits) {
-  // See https://github.com/googlei18n/libphonenumber/issues/36
-  // The bug occurred last time for countries which have two formatting rules
-  // with exactly the same leading digits pattern but differ in length.
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::GetUnknown()));
-
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+81 ", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+81 9", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("+81 90", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("+81 90 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+81 90 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+81 90 123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+81 90 1234", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("+81 90 1234 5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+81 90 1234 56", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+81 90 1234 567", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("+81 90 1234 5678", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+81 90 12 345 6789", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("+81901234567890", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("+819012345678901", formatter_->InputDigit('1', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, CountryWithSpaceInNationalPrefixFormattingRule) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::BY()));
-
-  EXPECT_EQ("8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("88", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("881", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("8 819", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("8 8190", formatter_->InputDigit('0', &result_));
-  // The formatting rule for 5 digit numbers states that no space should be
-  // present after the national prefix.
-  EXPECT_EQ("881 901", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("8 819 012", formatter_->InputDigit('2', &result_));
-  // Too long, no formatting rule applies.
-  EXPECT_EQ("88190123", formatter_->InputDigit('3', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest,
-       CountryWithSpaceInNationalPrefixFormattingRuleAndLongNdd) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::BY()));
-
-  EXPECT_EQ("9", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("99", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("999", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("9999", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("99999 ", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("99999 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("99999 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("99999 123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("99999 1234", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("99999 12 345", formatter_->InputDigit('5', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_US) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::US()));
-
-  EXPECT_EQ("6", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("65", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("650", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("650 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("650 25", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("650 253", formatter_->InputDigit('3', &result_));
-
-  // Note this is how a US local number (without area code) should be formatted.
-  EXPECT_EQ("650 2532", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("650 253 22", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("650 253 222", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("650 253 2222", formatter_->InputDigit('2', &result_));
-
-  formatter_->Clear();
-  EXPECT_EQ("1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("16", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("1 65", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("1 650", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("1 650 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("1 650 25", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("1 650 253", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("1 650 253 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("1 650 253 22", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("1 650 253 222", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("1 650 253 2222", formatter_->InputDigit('2', &result_));
-
-  formatter_->Clear();
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("01", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 ", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 4", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("011 44 ", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("011 44 6", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("011 44 61", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 44 6 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("011 44 6 123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("011 44 6 123 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 44 6 123 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("011 44 6 123 123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("011 44 6 123 123 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 44 6 123 123 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("011 44 6 123 123 123", formatter_->InputDigit('3', &result_));
-
-  formatter_->Clear();
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("01", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 ", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("011 54 ", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("011 54 9", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("011 54 91", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 54 9 11", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 54 9 11 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("011 54 9 11 23", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("011 54 9 11 231", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 54 9 11 2312", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("011 54 9 11 2312 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 54 9 11 2312 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("011 54 9 11 2312 123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("011 54 9 11 2312 1234", formatter_->InputDigit('4', &result_));
-
-  formatter_->Clear();
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("01", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 ", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("011 24", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("011 244 ", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("011 244 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("011 244 28", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("011 244 280", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("011 244 280 0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("011 244 280 00", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("011 244 280 000", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("011 244 280 000 0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("011 244 280 000 00", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("011 244 280 000 000", formatter_->InputDigit('0', &result_));
-
-  formatter_->Clear();
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+4", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("+48 ", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+48 8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+48 88", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+48 88 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+48 88 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+48 88 123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+48 88 123 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+48 88 123 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+48 88 123 12 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+48 88 123 12 12", formatter_->InputDigit('2', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_USFullWidthCharacters) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::US()));
-
-  EXPECT_EQ("\xEF\xBC\x96" /* "６" */,
-            formatter_->InputDigit(UnicodeString("\xEF\xBC\x96" /* "６" */)[0],
-                                   &result_));
-  EXPECT_EQ("\xEF\xBC\x96\xEF\xBC\x95" /* "６５" */,
-            formatter_->InputDigit(UnicodeString("\xEF\xBC\x95" /* "５" */)[0],
-                                   &result_));
-  EXPECT_EQ("650",
-            formatter_->InputDigit(UnicodeString("\xEF\xBC\x90" /* "０" */)[0],
-                                   &result_));
-  EXPECT_EQ("650 2",
-            formatter_->InputDigit(UnicodeString("\xEF\xBC\x92" /* "２" */)[0],
-                                   &result_));
-  EXPECT_EQ("650 25",
-            formatter_->InputDigit(UnicodeString("\xEF\xBC\x95" /* "５" */)[0],
-                                   &result_));
-  EXPECT_EQ("650 253",
-            formatter_->InputDigit(UnicodeString("\xEF\xBC\x93" /* "３" */)[0],
-                                   &result_));
-  EXPECT_EQ("650 2532",
-            formatter_->InputDigit(UnicodeString("\xEF\xBC\x92" /* "２" */)[0],
-                                   &result_));
-  EXPECT_EQ("650 253 22",
-            formatter_->InputDigit(UnicodeString("\xEF\xBC\x92" /* "２" */)[0],
-                                   &result_));
-  EXPECT_EQ("650 253 222",
-            formatter_->InputDigit(UnicodeString("\xEF\xBC\x92" /* "２" */)[0],
-                                   &result_));
-  EXPECT_EQ("650 253 2222",
-            formatter_->InputDigit(UnicodeString("\xEF\xBC\x92" /* "２" */)[0],
-                                   &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_USMobileShortCode) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::US()));
-
-  EXPECT_EQ("*", formatter_->InputDigit('*', &result_));
-  EXPECT_EQ("*1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("*12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("*121", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("*121#", formatter_->InputDigit('#', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_USVanityNumber) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::US()));
-
-  EXPECT_EQ("8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("80", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("800", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("800 ", formatter_->InputDigit(' ', &result_));
-  EXPECT_EQ("800 M", formatter_->InputDigit('M', &result_));
-  EXPECT_EQ("800 MY", formatter_->InputDigit('Y', &result_));
-  EXPECT_EQ("800 MY ", formatter_->InputDigit(' ', &result_));
-  EXPECT_EQ("800 MY A", formatter_->InputDigit('A', &result_));
-  EXPECT_EQ("800 MY AP", formatter_->InputDigit('P', &result_));
-  EXPECT_EQ("800 MY APP", formatter_->InputDigit('P', &result_));
-  EXPECT_EQ("800 MY APPL", formatter_->InputDigit('L', &result_));
-  EXPECT_EQ("800 MY APPLE", formatter_->InputDigit('E', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTFAndRememberPositionUS) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::US()));
-
-  EXPECT_EQ("1", formatter_->InputDigitAndRememberPosition('1', &result_));
-  EXPECT_EQ(1, formatter_->GetRememberedPosition());
-
-  EXPECT_EQ("16", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("1 65", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ(1, formatter_->GetRememberedPosition());
-  EXPECT_EQ("1 650", formatter_->InputDigitAndRememberPosition('0', &result_));
-  EXPECT_EQ(5, formatter_->GetRememberedPosition());
-  EXPECT_EQ("1 650 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("1 650 25", formatter_->InputDigit('5', &result_));
-
-  // Note the remembered position for digit "0" changes from 4 to 5, because a
-  // space is now inserted in the front.
-  EXPECT_EQ(5, formatter_->GetRememberedPosition());
-  EXPECT_EQ("1 650 253", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("1 650 253 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("1 650 253 22", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ(5, formatter_->GetRememberedPosition());
-  EXPECT_EQ("1 650 253 222", formatter_->InputDigitAndRememberPosition('2',
-        &result_));
-  EXPECT_EQ(13, formatter_->GetRememberedPosition());
-  EXPECT_EQ("1 650 253 2222", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ(13, formatter_->GetRememberedPosition());
-  EXPECT_EQ("165025322222", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ(10, formatter_->GetRememberedPosition());
-  EXPECT_EQ("1650253222222", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ(10, formatter_->GetRememberedPosition());
-
-  formatter_->Clear();
-  EXPECT_EQ("1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("16", formatter_->InputDigitAndRememberPosition('6', &result_));
-  EXPECT_EQ(2, formatter_->GetRememberedPosition());
-  EXPECT_EQ("1 65", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("1 650", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ(3, formatter_->GetRememberedPosition());
-  EXPECT_EQ("1 650 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("1 650 25", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ(3, formatter_->GetRememberedPosition());
-  EXPECT_EQ("1 650 253", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("1 650 253 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("1 650 253 22", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ(3, formatter_->GetRememberedPosition());
-  EXPECT_EQ("1 650 253 222", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("1 650 253 2222", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("165025322222", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ(2, formatter_->GetRememberedPosition());
-  EXPECT_EQ("1650253222222", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ(2, formatter_->GetRememberedPosition());
-
-  formatter_->Clear();
-  EXPECT_EQ("6", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("65", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("650", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("650 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("650 25", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("650 253", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("650 2532",
-            formatter_->InputDigitAndRememberPosition('2', &result_));
-  EXPECT_EQ(8, formatter_->GetRememberedPosition());
-  EXPECT_EQ("650 253 22", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ(9, formatter_->GetRememberedPosition());
-  EXPECT_EQ("650 253 222", formatter_->InputDigit('2', &result_));
-  // No more formatting when semicolon is entered.
-  EXPECT_EQ("650253222;", formatter_->InputDigit(';', &result_));
-  EXPECT_EQ(7, formatter_->GetRememberedPosition());
-  EXPECT_EQ("650253222;2", formatter_->InputDigit('2', &result_));
-
-  formatter_->Clear();
-  EXPECT_EQ("6", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("65", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("650", formatter_->InputDigit('0', &result_));
-  // No more formatting when users choose to do their own formatting.
-  EXPECT_EQ("650-", formatter_->InputDigit('-', &result_));
-  EXPECT_EQ("650-2", formatter_->InputDigitAndRememberPosition('2', &result_));
-  EXPECT_EQ(5, formatter_->GetRememberedPosition());
-  EXPECT_EQ("650-25", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ(5, formatter_->GetRememberedPosition());
-  EXPECT_EQ("650-253", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ(5, formatter_->GetRememberedPosition());
-  EXPECT_EQ("650-253-", formatter_->InputDigit('-', &result_));
-  EXPECT_EQ("650-253-2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("650-253-22", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("650-253-222", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("650-253-2222", formatter_->InputDigit('2', &result_));
-
-  formatter_->Clear();
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("01", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 ", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 4", formatter_->InputDigitAndRememberPosition('4', &result_));
-  EXPECT_EQ("011 48 ", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ(5, formatter_->GetRememberedPosition());
-  EXPECT_EQ("011 48 8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ(5, formatter_->GetRememberedPosition());
-  EXPECT_EQ("011 48 88", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("011 48 88 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 48 88 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ(5, formatter_->GetRememberedPosition());
-  EXPECT_EQ("011 48 88 123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("011 48 88 123 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 48 88 123 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("011 48 88 123 12 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 48 88 123 12 12", formatter_->InputDigit('2', &result_));
-
-  formatter_->Clear();
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+1 6", formatter_->InputDigitAndRememberPosition('6', &result_));
-  EXPECT_EQ("+1 65", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+1 650", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ(4, formatter_->GetRememberedPosition());
-  EXPECT_EQ("+1 650 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ(4, formatter_->GetRememberedPosition());
-  EXPECT_EQ("+1 650 25", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+1 650 253",
-            formatter_->InputDigitAndRememberPosition('3', &result_));
-  EXPECT_EQ("+1 650 253 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+1 650 253 22", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+1 650 253 222", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ(10, formatter_->GetRememberedPosition());
-
-  formatter_->Clear();
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+1 6", formatter_->InputDigitAndRememberPosition('6', &result_));
-  EXPECT_EQ("+1 65", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+1 650", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ(4, formatter_->GetRememberedPosition());
-  EXPECT_EQ("+1 650 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ(4, formatter_->GetRememberedPosition());
-  EXPECT_EQ("+1 650 25", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+1 650 253", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+1 650 253 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+1 650 253 22", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+1 650 253 222", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+1650253222;", formatter_->InputDigit(';', &result_));
-  EXPECT_EQ(3, formatter_->GetRememberedPosition());
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_GBFixedLine) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::GB()));
-
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("02", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("020", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("020 7", formatter_->InputDigitAndRememberPosition('7', &result_));
-  EXPECT_EQ(5, formatter_->GetRememberedPosition());
-  EXPECT_EQ("020 70", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("020 703", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ(5, formatter_->GetRememberedPosition());
-  EXPECT_EQ("020 7031", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("020 7031 3", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("020 7031 30", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("020 7031 300", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("020 7031 3000", formatter_->InputDigit('0', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_GBTollFree) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::GB()));
-
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("08", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("080", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("080 7", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("080 70", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("080 703", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("080 7031", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("080 7031 3", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("080 7031 30", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("080 7031 300", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("080 7031 3000", formatter_->InputDigit('0', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_GBPremiumRate) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::GB()));
-
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("09", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("090", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("090 7", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("090 70", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("090 703", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("090 7031", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("090 7031 3", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("090 7031 30", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("090 7031 300", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("090 7031 3000", formatter_->InputDigit('0', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_NZMobile) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::NZ()));
-
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("02", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("021", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("02-11", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("02-112", formatter_->InputDigit('2', &result_));
-  // Note the unittest is using fake metadata which might produce non-ideal
-  // results.
-  EXPECT_EQ("02-112 3", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("02-112 34", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("02-112 345", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("02-112 3456", formatter_->InputDigit('6', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_DE) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::DE()));
-
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("03", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("030", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("030/1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("030/12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("030/123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("030/1234", formatter_->InputDigit('4', &result_));
-
-  // 08021 2345
-  formatter_->Clear();
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("08", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("080", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("080 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("080 21", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("08021 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("08021 23", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("08021 234", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("08021 2345", formatter_->InputDigit('5', &result_));
-
-  // 00 1 650 253 2250
-  formatter_->Clear();
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("00", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("00 1 ", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("00 1 6", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("00 1 65", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("00 1 650", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("00 1 650 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("00 1 650 25", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("00 1 650 253", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("00 1 650 253 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("00 1 650 253 22", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("00 1 650 253 222", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("00 1 650 253 2222", formatter_->InputDigit('2', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_AR) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::AR()));
-
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("01", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 7", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("011 70", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("011 703", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("011 7031", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 7031-3", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("011 7031-30", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("011 7031-300", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("011 7031-3000", formatter_->InputDigit('0', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_ARMobile) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::AR()));
-
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+54 ", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("+54 9", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("+54 91", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+54 9 11", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+54 9 11 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+54 9 11 23", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+54 9 11 231", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+54 9 11 2312", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+54 9 11 2312 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+54 9 11 2312 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+54 9 11 2312 123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+54 9 11 2312 1234", formatter_->InputDigit('4', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_KR) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::KR()));
-
-  // +82 51 234 5678
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+82 ", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+82 5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+82 51", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+82 51-2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+82 51-23", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+82 51-234", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("+82 51-234-5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+82 51-234-56", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+82 51-234-567", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("+82 51-234-5678", formatter_->InputDigit('8', &result_));
-
-  // +82 2 531 5678
-  formatter_->Clear();
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+82 ", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+82 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+82 25", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+82 2-53", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+82 2-531", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+82 2-531-5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+82 2-531-56", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+82 2-531-567", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("+82 2-531-5678", formatter_->InputDigit('8', &result_));
-
-  // +82 2 3665 5678
-  formatter_->Clear();
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+82 ", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+82 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+82 23", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+82 2-36", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+82 2-366", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+82 2-3665", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+82 2-3665-5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+82 2-3665-56", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+82 2-3665-567", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("+82 2-3665-5678", formatter_->InputDigit('8', &result_));
-
-  // 02-114
-  formatter_->Clear();
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("02", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("021", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("02-11", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("02-114", formatter_->InputDigit('4', &result_));
-
-  // 02-1300
-  formatter_->Clear();
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("02", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("021", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("02-13", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("02-130", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("02-1300", formatter_->InputDigit('0', &result_));
-
-  // 011-456-7890
-  formatter_->Clear();
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("01", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011-4", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("011-45", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("011-456", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("011-456-7", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("011-456-78", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("011-456-789", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("011-456-7890", formatter_->InputDigit('0', &result_));
-
-  // 011-9876-7890
-  formatter_->Clear();
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("01", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011-9", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("011-98", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("011-987", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("011-9876", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("011-9876-7", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("011-9876-78", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("011-9876-789", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("011-9876-7890", formatter_->InputDigit('0', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_MX) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::MX()));
-
-  // +52 800 123 4567
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+52 ", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+52 8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+52 80", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("+52 800", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("+52 800 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+52 800 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+52 800 123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+52 800 123 4", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("+52 800 123 45", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+52 800 123 456", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+52 800 123 4567", formatter_->InputDigit('7', &result_));
-
-  // +52 55 1234 5678
-  formatter_->Clear();
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+52 ", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+52 5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+52 55", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+52 55 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+52 55 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+52 55 123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+52 55 1234", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("+52 55 1234 5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+52 55 1234 56", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+52 55 1234 567", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("+52 55 1234 5678", formatter_->InputDigit('8', &result_));
-
-  // +52 212 345 6789
-  formatter_->Clear();
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+52 ", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+52 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+52 21", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+52 212", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+52 212 3", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+52 212 34", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("+52 212 345", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+52 212 345 6", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+52 212 345 67", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("+52 212 345 678", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+52 212 345 6789", formatter_->InputDigit('9', &result_));
-
-  // +52 1 55 1234 5678
-  formatter_->Clear();
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+52 ", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+52 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+52 15", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+52 1 55", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+52 1 55 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+52 1 55 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+52 1 55 123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+52 1 55 1234", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("+52 1 55 1234 5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+52 1 55 1234 56", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+52 1 55 1234 567", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("+52 1 55 1234 5678", formatter_->InputDigit('8', &result_));
-
-  // +52 1 541 234 5678
-  formatter_->Clear();
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+52 ", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+52 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+52 15", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+52 1 54", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("+52 1 541", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+52 1 541 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+52 1 541 23", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+52 1 541 234", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("+52 1 541 234 5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+52 1 541 234 56", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+52 1 541 234 567", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("+52 1 541 234 5678", formatter_->InputDigit('8', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_International_Toll_Free) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::US()));
-  // +800 1234 5678
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+80", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("+800 ", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("+800 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+800 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+800 123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+800 1234", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("+800 1234 5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+800 1234 56", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+800 1234 567", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("+800 1234 5678", formatter_->InputDigit('8', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_MultipleLeadingDigitPatterns) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::JP()));
-
-  // +81 50 2345 6789
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+81 ", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+81 5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+81 50", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("+81 50 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+81 50 23", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+81 50 234", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("+81 50 2345", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+81 50 2345 6", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+81 50 2345 67", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("+81 50 2345 678", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+81 50 2345 6789", formatter_->InputDigit('9', &result_));
-
-  // +81 222 12 5678
-  formatter_->Clear();
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+81 ", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+81 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+81 22", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+81 22 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+81 22 21", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+81 2221 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+81 222 12 5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+81 222 12 56", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+81 222 12 567", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("+81 222 12 5678", formatter_->InputDigit('8', &result_));
-
-  // 011113
-  formatter_->Clear();
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("01", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011 11", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("011113", formatter_->InputDigit('3', &result_));
-
-  // +81 3332 2 5678
-  formatter_->Clear();
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+81 ", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+81 3", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+81 33", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+81 33 3", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+81 3332", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+81 3332 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+81 3332 2 5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+81 3332 2 56", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+81 3332 2 567", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("+81 3332 2 5678", formatter_->InputDigit('8', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_LongIDD_AU) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::AU()));
-  // 0011 1 650 253 2250
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("00", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("001", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("0011", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("0011 1 ", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("0011 1 6", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("0011 1 65", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("0011 1 650", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("0011 1 650 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("0011 1 650 25", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("0011 1 650 253", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("0011 1 650 253 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("0011 1 650 253 22", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("0011 1 650 253 222", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("0011 1 650 253 2222", formatter_->InputDigit('2', &result_));
-
-  // 0011 81 3332 2 5678
-  formatter_->Clear();
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("00", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("001", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("0011", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("00118", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("0011 81 ", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("0011 81 3", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("0011 81 33", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("0011 81 33 3", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("0011 81 3332", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("0011 81 3332 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("0011 81 3332 2 5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("0011 81 3332 2 56", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("0011 81 3332 2 567", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("0011 81 3332 2 5678", formatter_->InputDigit('8', &result_));
-
-  // 0011 244 250 253 222
-  formatter_->Clear();
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("00", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("001", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("0011", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("00112", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("001124", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("0011 244 ", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("0011 244 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("0011 244 25", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("0011 244 250", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("0011 244 250 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("0011 244 250 25", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("0011 244 250 253", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("0011 244 250 253 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("0011 244 250 253 22", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("0011 244 250 253 222", formatter_->InputDigit('2', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_LongIDD_KR) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::KR()));
-  // 00300 1 650 253 2250
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("00", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("003", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("0030", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("00300", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("00300 1 ", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("00300 1 6", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("00300 1 65", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("00300 1 650", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("00300 1 650 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("00300 1 650 25", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("00300 1 650 253", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("00300 1 650 253 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("00300 1 650 253 22", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("00300 1 650 253 222", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("00300 1 650 253 2222", formatter_->InputDigit('2', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_LongNDD_KR) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::KR()));
-  // 08811-9876-7890
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("08", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("088", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("0881", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("08811", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("08811-9", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("08811-98", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("08811-987", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("08811-9876", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("08811-9876-7", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("08811-9876-78", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("08811-9876-789", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("08811-9876-7890", formatter_->InputDigit('0', &result_));
-
-  // 08500 11-9876-7890
-  formatter_->Clear();
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("08", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("085", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("0850", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("08500 ", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("08500 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("08500 11", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("08500 11-9", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("08500 11-98", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("08500 11-987", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("08500 11-9876", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("08500 11-9876-7", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("08500 11-9876-78", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("08500 11-9876-789", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("08500 11-9876-7890", formatter_->InputDigit('0', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_LongNDD_SG) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::SG()));
-  // 777777 9876 7890
-  EXPECT_EQ("7", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("77", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("777", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("7777", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("77777", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("777777 ", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("777777 9", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("777777 98", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("777777 987", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("777777 9876", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("777777 9876 7", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("777777 9876 78", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("777777 9876 789", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("777777 9876 7890", formatter_->InputDigit('0', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_ShortNumberFormattingFix_AU) {
-  // For Australia, the national prefix is not optional when formatting.
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::AU()));
-
-  // 1234567890 - For leading digit 1, the national prefix formatting rule has
-  // first group only.
-  EXPECT_EQ("1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("1234", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("1234 5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("1234 56", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("1234 567", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("1234 567 8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("1234 567 89", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("1234 567 890", formatter_->InputDigit('0', &result_));
-
-  // +61 1234 567 890 - Test the same number, but with the country code.
-  formatter_->Clear();
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+6", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+61 ", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+61 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+61 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+61 123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+61 1234", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("+61 1234 5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+61 1234 56", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+61 1234 567", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("+61 1234 567 8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+61 1234 567 89", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("+61 1234 567 890", formatter_->InputDigit('0', &result_));
-
-  // 212345678 - For leading digit 2, the national prefix formatting rule puts
-  // the national prefix before the first group.
-  formatter_->Clear();
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("02", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("021", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("02 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("02 123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("02 1234", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("02 1234 5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("02 1234 56", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("02 1234 567", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("02 1234 5678", formatter_->InputDigit('8', &result_));
-
-  // 212345678 - Test the same number, but without the leading 0.
-  formatter_->Clear();
-  EXPECT_EQ("2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("21", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("212", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("2123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("21234", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("212345", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("2123456", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("21234567", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("212345678", formatter_->InputDigit('8', &result_));
-
-  // +61 2 1234 5678 - Test the same number, but with the country code.
-  formatter_->Clear();
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+6", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+61 ", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+61 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+61 21", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+61 2 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+61 2 123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+61 2 1234", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("+61 2 1234 5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+61 2 1234 56", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+61 2 1234 567", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("+61 2 1234 5678", formatter_->InputDigit('8', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_ShortNumberFormattingFix_KR) {
-  // For Korea, the national prefix is not optional when formatting, and the
-  // national prefix formatting rule doesn't consist of only the first group.
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::KR()));
-
-  // 111
-  EXPECT_EQ("1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("11", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("111", formatter_->InputDigit('1', &result_));
-
-  // 114
-  formatter_->Clear();
-  EXPECT_EQ("1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("11", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("114", formatter_->InputDigit('4', &result_));
-
-  // 131212345 - Test a mobile number without the national prefix. Even though
-  // it is not an emergency number, it should be formatted as a block.
-  formatter_->Clear();
-  EXPECT_EQ("1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("13", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("131", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("1312", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("13121", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("131212", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("1312123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("13121234", formatter_->InputDigit('4', &result_));
-
-  // +82 131-2-1234 - Test the same number, but with the country code.
-  formatter_->Clear();
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+82 ", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+82 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+82 13", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+82 131", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+82 131-2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+82 131-2-1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+82 131-2-12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+82 131-2-123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+82 131-2-1234", formatter_->InputDigit('4', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_ShortNumberFormattingFix_MX) {
-  // For Mexico, the national prefix is optional when formatting.
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::MX()));
-
-  // 911
-  EXPECT_EQ("9", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("91", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("911", formatter_->InputDigit('1', &result_));
-
-  // 800 123 4567 - Test a toll-free number, which should have a formatting rule
-  // applied to it even though it doesn't begin with the national prefix.
-  formatter_->Clear();
-  EXPECT_EQ("8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("80", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("800", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("800 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("800 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("800 123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("800 123 4", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("800 123 45", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("800 123 456", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("800 123 4567", formatter_->InputDigit('7', &result_));
-
-  // +52 800 123 4567 - Test the same number, but with the country code.
-  formatter_->Clear();
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+52 ", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+52 8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+52 80", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("+52 800", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("+52 800 1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("+52 800 12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+52 800 123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+52 800 123 4", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("+52 800 123 45", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("+52 800 123 456", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+52 800 123 4567", formatter_->InputDigit('7', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_NoNationalPrefix) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::IT()));
-
-  EXPECT_EQ("3", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("33", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("333", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("333 3", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("333 33", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("333 333", formatter_->InputDigit('3', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_NoNationalPrefixFormattingRule) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::AO()));
-
-  EXPECT_EQ("3", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("33", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("333", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("333 3", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("333 33", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("333 333", formatter_->InputDigit('3', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_ShortNumberFormattingFix_US) {
-  // For the US, an initial 1 is treated specially.
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::US()));
-
-  // 101 - Test that the initial 1 is not treated as a national prefix.
-  EXPECT_EQ("1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("10", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("101", formatter_->InputDigit('1', &result_));
-
-  // 112 - Test that the initial 1 is not treated as a national prefix.
-  formatter_->Clear();
-  EXPECT_EQ("1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("11", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("112", formatter_->InputDigit('2', &result_));
-
-  // 122 - Test that the initial 1 is treated as a national prefix.
-  formatter_->Clear();
-  EXPECT_EQ("1", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("12", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("1 22", formatter_->InputDigit('2', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest, AYTF_ClearNDDAfterIDDExtraction) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::KR()));
-
-  // Check that when we have successfully extracted an IDD, the previously
-  // extracted NDD is cleared since it is no longer valid.
-  EXPECT_EQ("0", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("00", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("007", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("0070", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("00700", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("0", GetExtractedNationalPrefix());
-
-  // Once the IDD "00700" has been extracted, it no longer makes sense for the
-  // initial "0" to be treated as an NDD.
-  EXPECT_EQ("00700 1 ", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("", GetExtractedNationalPrefix());
-
-  EXPECT_EQ("00700 1 2", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("00700 1 23", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("00700 1 234", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("00700 1 234 5", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("00700 1 234 56", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("00700 1 234 567", formatter_->InputDigit('7', &result_));
-  EXPECT_EQ("00700 1 234 567 8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("00700 1 234 567 89", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("00700 1 234 567 890", formatter_->InputDigit('0', &result_));
-  EXPECT_EQ("00700 1 234 567 8901", formatter_->InputDigit('1', &result_));
-  EXPECT_EQ("00700123456789012", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("007001234567890123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("0070012345678901234", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("00700123456789012345", formatter_->InputDigit('5', &result_));
-  EXPECT_EQ("007001234567890123456", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("0070012345678901234567", formatter_->InputDigit('7', &result_));
-}
-
-TEST_F(AsYouTypeFormatterTest,
-       NumberPatternsBecomingInvalidShouldNotResultInDigitLoss) {
-  formatter_.reset(phone_util_.GetAsYouTypeFormatter(RegionCode::CN()));
-
-  EXPECT_EQ("+", formatter_->InputDigit('+', &result_));
-  EXPECT_EQ("+8", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+86 ", formatter_->InputDigit('6', &result_));
-  EXPECT_EQ("+86 9", formatter_->InputDigit('9', &result_));
-  EXPECT_EQ("+86 98", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+86 988", formatter_->InputDigit('8', &result_));
-  EXPECT_EQ("+86 988 1", formatter_->InputDigit('1', &result_));
-  // Now the number pattern is no longer valid because there are multiple
-  // leading digit patterns; when we try again to extract a country code we
-  // should ensure we use the last leading digit pattern, rather than the first
-  // one such that it *thinks* it's found a valid formatting rule again.
-  // https://github.com/googlei18n/libphonenumber/issues/437
-  EXPECT_EQ("+8698812", formatter_->InputDigit('2', &result_));
-  EXPECT_EQ("+86988123", formatter_->InputDigit('3', &result_));
-  EXPECT_EQ("+869881234", formatter_->InputDigit('4', &result_));
-  EXPECT_EQ("+8698812345", formatter_->InputDigit('5', &result_));
-}
-
-}  // namespace phonenumbers
-}  // namespace i18n