phonelib 0.6.5 → 0.6.6

data/data/libphonenumber/resources/geocoding/zh/886.txt

@@ -1,30 +0,0 @@
-# Copyright (C) 2011 The Libphonenumber Authors
-
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-
-# http://www.apache.org/licenses/LICENSE-2.0
-
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Generated from:
-# http://zh.wikipedia.org/zh-cn/中華民國長途電話區號表 [16772295]
-
-8862|台北
-8863|桃园、新竹、花莲、宜兰
-88637|苗栗
-8864|台中、彰化
-88649|南投
-8865|嘉义、云林
-8866|台南、澎湖
-8867|高雄
-8868|屏东
-88682|金门
-886826|乌丘
-886836|马祖
-88689|台东

data/data/libphonenumber/resources/geocoding/zh_Hant/82.txt

@@ -1,35 +0,0 @@
-# Copyright (C) 2011 The Libphonenumber Authors
-
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-
-# http://www.apache.org/licenses/LICENSE-2.0
-
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Generated from: translation of
-# http://www.itu.int/oth/T0202000072/en [2004-03-01]
-# http://en.wikipedia.org/wiki/+82 [390794641]
-
-822|首爾市
-8231|京畿道
-8232|仁川廣
-8233|江原道
-8241|忠清南道
-8242|大田廣
-8243|忠清北道
-8244|世宗市
-8251|釜山廣
-8252|蔚山廣
-8253|大邱廣
-8254|慶尚北道
-8255|慶尚南道
-8261|全羅南道
-8262|光州廣
-8263|全羅北道
-8264|濟州道

data/data/libphonenumber/resources/geocoding/zh_Hant/886.txt

@@ -1,30 +0,0 @@
-# Copyright (C) 2011 The Libphonenumber Authors
-
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-
-# http://www.apache.org/licenses/LICENSE-2.0
-
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Generated from:
-# http://zh.wikipedia.org/wiki/中華民國長途電話區號表 [16772295]
-
-8862|臺北
-8863|桃園、新竹、花蓮、宜蘭
-88637|苗栗
-8864|臺中、彰化
-88649|南投
-8865|嘉義、雲林
-8866|臺南、澎湖
-8867|高雄
-8868|屏東
-88682|金門
-886826|烏坵
-886836|馬祖
-88689|臺東

data/data/libphonenumber/resources/phonemetadata.proto

@@ -1,282 +0,0 @@
-/*
- * Copyright (C) 2009 The Libphonenumber Authors
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-// Definition of protocol buffer for holding metadata for international
-// telephone numbers. The fields here correspond exactly to those in
-// resources/PhoneNumberMetadata.xml.
-// @author Shaopeng Jia
-
-syntax = "proto2";
-
-option optimize_for = LITE_RUNTIME;
-
-option java_package = "com.google.i18n.phonenumbers";
-package i18n.phonenumbers;
-
-message NumberFormat {
-  // pattern is a regex that is used to match the national (significant)
-  // number. For example, the pattern "(20)(\d{4})(\d{4})" will match number
-  // "2070313000", which is the national (significant) number for Google London.
-  // Note the presence of the parentheses, which are capturing groups what
-  // specifies the grouping of numbers.
-  required string pattern = 1;
-
-  // format specifies how the national (significant) number matched by
-  // pattern should be formatted.
-  // Using the same example as above, format could contain "$1 $2 $3",
-  // meaning that the number should be formatted as "20 7031 3000".
-  // Each $x are replaced by the numbers captured by group x in the
-  // regex specified by pattern.
-  required string format = 2;
-
-  // This field is a regex that is used to match a certain number of digits
-  // at the beginning of the national (significant) number. When the match is
-  // successful, the accompanying pattern and format should be used to format
-  // this number. For example, if leading_digits="[1-3]|44", then all the
-  // national numbers starting with 1, 2, 3 or 44 should be formatted using the
-  // accompanying pattern and format.
-  //
-  // The first leadingDigitsPattern matches up to the first three digits of the
-  // national (significant) number; the next one matches the first four digits,
-  // then the first five and so on, until the leadingDigitsPattern can uniquely
-  // identify one pattern and format to be used to format the number.
-  //
-  // In the case when only one formatting pattern exists, no
-  // leading_digits_pattern is needed.
-  repeated string leading_digits_pattern = 3;
-
-  // This field specifies how the national prefix ($NP) together with the first
-  // group ($FG) in the national significant number should be formatted in
-  // the NATIONAL format when a national prefix exists for a certain country.
-  // For example, when this field contains "($NP$FG)", a number from Beijing,
-  // China (whose $NP = 0), which would by default be formatted without
-  // national prefix as 10 1234 5678 in NATIONAL format, will instead be
-  // formatted as (010) 1234 5678; to format it as (0)10 1234 5678, the field
-  // would contain "($NP)$FG". Note $FG should always be present in this field,
-  // but $NP can be omitted. For example, having "$FG" could indicate the
-  // number should be formatted in NATIONAL format without the national prefix.
-  // This is commonly used to override the rule specified for the territory in
-  // the XML file.
-  //
-  // When this field is missing, a number will be formatted without national
-  // prefix in NATIONAL format. This field does not affect how a number
-  // is formatted in other formats, such as INTERNATIONAL.
-  optional string national_prefix_formatting_rule = 4;
-
-  // This field specifies whether the $NP can be omitted when formatting a
-  // number in national format, even though it usually wouldn't be. For example,
-  // a UK number would be formatted by our library as 020 XXXX XXXX. If we have
-  // commonly seen this number written by people without the leading 0, for
-  // example as (20) XXXX XXXX, this field would be set to true. This will be
-  // inherited from the value set for the territory in the XML file, unless a
-  // national_prefix_optional_when_formatting is defined specifically for this
-  // NumberFormat.
-  optional bool national_prefix_optional_when_formatting = 6;
-
-  // This field specifies how any carrier code ($CC) together with the first
-  // group ($FG) in the national significant number should be formatted
-  // when formatWithCarrierCode is called, if carrier codes are used for a
-  // certain country.
-  optional string domestic_carrier_code_formatting_rule = 5;
-}
-
-message PhoneNumberDesc {
-  // The national_number_pattern is the pattern that a valid national
-  // significant number would match. This specifies information such as its
-  // total length and leading digits.
-  optional string national_number_pattern = 2;
-
-  // The possible_number_pattern represents what a potentially valid phone
-  // number for this region may be written as. This is a superset of the
-  // national_number_pattern above and includes numbers that have the area code
-  // omitted. Typically the only restrictions here are in the number of digits.
-  // This could be used to highlight tokens in a text that may be a phone
-  // number, or to quickly prune numbers that could not possibly be a phone
-  // number for this locale.
-  optional string possible_number_pattern = 3;
-
-  // An example national significant number for the specific type. It should
-  // not contain any formatting information.
-  optional string example_number = 6;
-}
-
-message PhoneMetadata {
-  // The general_desc contains information which is a superset of descriptions
-  // for all types of phone numbers. If any element is missing in the
-  // description of a specific type in the XML file, the element will inherit
-  // from its counterpart in the general_desc. Every locale is assumed to have
-  // fixed line and mobile numbers - if these types are missing in the
-  // PhoneNumberMetadata XML file, they will inherit all fields from the
-  // general_desc. For all other types that are generally relevant to normal
-  // phone numbers, if the whole type is missing in the PhoneNumberMetadata XML
-  // file, it will be given a national_number_pattern of "NA" and a
-  // possible_number_pattern of "NA".
-  optional PhoneNumberDesc general_desc = 1;
-  optional PhoneNumberDesc fixed_line = 2;
-  optional PhoneNumberDesc mobile = 3;
-  optional PhoneNumberDesc toll_free = 4;
-  optional PhoneNumberDesc premium_rate = 5;
-  optional PhoneNumberDesc shared_cost = 6;
-  optional PhoneNumberDesc personal_number = 7;
-  optional PhoneNumberDesc voip = 8;
-  optional PhoneNumberDesc pager = 21;
-  optional PhoneNumberDesc uan = 25;
-  optional PhoneNumberDesc emergency = 27;
-  optional PhoneNumberDesc voicemail = 28;
-  optional PhoneNumberDesc short_code = 29;
-  optional PhoneNumberDesc standard_rate = 30;
-  optional PhoneNumberDesc carrier_specific = 31;
-
-  // The rules here distinguish the numbers that are only able to be dialled
-  // nationally.
-  optional PhoneNumberDesc no_international_dialling = 24;
-
-  // The ISO 3166-1 alpha-2 representation of a country/region, with the
-  // exception of "country calling codes" used for non-geographical entities,
-  // such as Universal International Toll Free Number (+800). These are all
-  // given the ID "001", since this is the numeric region code for the world
-  // according to UN M.49: http://en.wikipedia.org/wiki/UN_M.49
-  required string id = 9;
-
-  // The country calling code that one would dial from overseas when trying to
-  // dial a phone number in this country. For example, this would be "64" for
-  // New Zealand.
-  optional int32 country_code = 10;
-
-  // The international_prefix of country A is the number that needs to be
-  // dialled from country A to another country (country B). This is followed
-  // by the country code for country B. Note that some countries may have more
-  // than one international prefix, and for those cases, a regular expression
-  // matching the international prefixes will be stored in this field.
-  optional string international_prefix = 11;
-
-  // If more than one international prefix is present, a preferred prefix can
-  // be specified here for out-of-country formatting purposes. If this field is
-  // not present, and multiple international prefixes are present, then "+"
-  // will be used instead.
-  optional string preferred_international_prefix = 17;
-
-  // The national prefix of country A is the number that needs to be dialled
-  // before the national significant number when dialling internally. This
-  // would not be dialled when dialling internationally. For example, in New
-  // Zealand, the number that would be locally dialled as 09 345 3456 would be
-  // dialled from overseas as +64 9 345 3456. In this case, 0 is the national
-  // prefix.
-  optional string national_prefix = 12;
-
-  // The preferred prefix when specifying an extension in this country. This is
-  // used for formatting only, and if this is not specified, a suitable default
-  // should be used instead. For example, if you wanted extensions to be
-  // formatted in the following way:
-  // 1 (365) 345 445 ext. 2345
-  // " ext. "  should be the preferred extension prefix.
-  optional string preferred_extn_prefix = 13;
-
-  // This field is used for cases where the national prefix of a country
-  // contains a carrier selection code, and is written in the form of a
-  // regular expression. For example, to dial the number 2222-2222 in
-  // Fortaleza, Brazil (area code 85) using the long distance carrier Oi
-  // (selection code 31), one would dial 0 31 85 2222 2222. Assuming the
-  // only other possible carrier selection code is 32, the field will
-  // contain "03[12]".
-  //
-  // When it is missing from the XML file, this field inherits the value of
-  // national_prefix, if that is present.
-  optional string national_prefix_for_parsing = 15;
-
-  // This field is only populated and used under very rare situations.
-  // For example, mobile numbers in Argentina are written in two completely
-  // different ways when dialed in-country and out-of-country
-  // (e.g. 0343 15 555 1212 is exactly the same number as +54 9 343 555 1212).
-  // This field is used together with national_prefix_for_parsing to transform
-  // the number into a particular representation for storing in the phonenumber
-  // proto buffer in those rare cases.
-  optional string national_prefix_transform_rule = 16;
-
-  // Specifies whether the mobile and fixed-line patterns are the same or not.
-  // This is used to speed up determining phone number type in countries where
-  // these two types of phone numbers can never be distinguished.
-  optional bool same_mobile_and_fixed_line_pattern = 18 [default=false];
-
-  // Note that the number format here is used for formatting only, not parsing.
-  // Hence all the varied ways a user *may* write a number need not be recorded
-  // - just the ideal way we would like to format it for them. When this element
-  // is absent, the national significant number will be formatted as a whole
-  // without any formatting applied.
-  repeated NumberFormat number_format = 19;
-
-  // This field is populated only when the national significant number is
-  // formatted differently when it forms part of the INTERNATIONAL format
-  // and NATIONAL format. A case in point is mobile numbers in Argentina:
-  // The number, which would be written in INTERNATIONAL format as
-  // +54 9 343 555 1212, will be written as 0343 15 555 1212 for NATIONAL
-  // format. In this case, the prefix 9 is inserted when dialling from
-  // overseas, but otherwise the prefix 0 and the carrier selection code
-  // 15 (inserted after the area code of 343) is used.
-  // Note: this field is populated by setting a value for <intlFormat> inside
-  // the <numberFormat> tag in the XML file. If <intlFormat> is not set then it
-  // defaults to the same value as the <format> tag.
-  //
-  // Examples:
-  //   To set the <intlFormat> to a different value than the <format>:
-  //     <numberFormat pattern=....>
-  //       <format>$1 $2 $3</format>
-  //       <intlFormat>$1-$2-$3</intlFormat>
-  //     </numberFormat>
-  //
-  //   To have a format only used for national formatting, set <intlFormat> to
-  //   "NA":
-  //     <numberFormat pattern=....>
-  //       <format>$1 $2 $3</format>
-  //       <intlFormat>NA</intlFormat>
-  //     </numberFormat>
-  repeated NumberFormat intl_number_format = 20;
-
-  // This field is set when this country is considered to be the main country
-  // for a calling code. It may not be set by more than one country with the
-  // same calling code, and it should not be set by countries with a unique
-  // calling code. This can be used to indicate that "GB" is the main country
-  // for the calling code "44" for example, rather than Jersey or the Isle of
-  // Man.
-  optional bool main_country_for_code = 22 [default=false];
-
-  // This field is populated only for countries or regions that share a country
-  // calling code. If a number matches this pattern, it could belong to this
-  // region. This is not intended as a replacement for IsValidForRegion, and
-  // does not mean the number must come from this region (for example, 800
-  // numbers are valid for all NANPA countries.) This field should be a regular
-  // expression of the expected prefix match.
-  optional string leading_digits = 23;
-
-  // The leading zero in a phone number is meaningful in some countries (e.g.
-  // Italy). This means they cannot be dropped from the national number when
-  // converting into international format. If leading zeros are possible for
-  // valid international numbers for this region/country then set this to true.
-  // This only needs to be set for the region that is the main_country_for_code
-  // and all regions associated with that calling code will use the same
-  // setting.
-  optional bool leading_zero_possible = 26 [default=false];
-
-  // This field is set when this country has implemented mobile number
-  // portability. This means that transferring mobile numbers between carriers
-  // is allowed. A consequence of this is that phone prefix to carrier mapping
-  // is less reliable.
-  optional bool mobile_number_portable_region = 32 [default=false];
-}
-
-message PhoneMetadataCollection {
-  repeated PhoneMetadata metadata = 1;
-}

data/data/libphonenumber/resources/phonenumber.proto

@@ -1,124 +0,0 @@
-/*
- * Copyright (C) 2009 The Libphonenumber Authors
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-// Definition of protocol buffer for representing international telephone numbers.
-// @author Shaopeng Jia
-
-syntax = "proto2";
-
-option java_package = "com.google.i18n.phonenumbers";
-option optimize_for = LITE_RUNTIME;
-
-package i18n.phonenumbers;
-
-message PhoneNumber {
-// The country calling code for this number, as defined by the International Telecommunication Union
-// (ITU). For example, this would be 1 for NANPA countries, and 33 for France.
-  required int32 country_code = 1;
-
-// National (significant) Number is defined in International Telecommunication Union (ITU)
-// Recommendation E.164. It is a language/country-neutral representation of a phone number at a
-// country level. For countries which have the concept of an "area code" or "national destination
-// code", this is included in the National (significant) Number. Although the ITU says the maximum
-// length should be 15, we have found longer numbers in some countries e.g. Germany.
-// Note that the National (significant) Number does not contain the National(trunk) prefix.
-// Obviously, as a uint64, it will never contain any formatting (hyphens, spaces, parentheses), nor
-// any alphanumeric spellings.
-  required uint64 national_number = 2;
-
-// Extension is not standardized in ITU recommendations, except for being defined as a series of
-// numbers with a maximum length of 40 digits. It is defined as a string here to accommodate for the
-// possible use of a leading zero in the extension (organizations have complete freedom to do so,
-// as there is no standard defined). However, only ASCII digits should be stored here.
-  optional string extension = 3;
-
-// In some countries, the national (significant) number starts with one or more "0"s without this
-// being a national prefix or trunk code of some kind. For example, the leading zero in the national
-// (significant) number of an Italian phone number indicates the number is a fixed-line number.
-// There have been plans to migrate fixed-line numbers to start with the digit two since December
-// 2000, but it has not happened yet. See http://en.wikipedia.org/wiki/%2B39 for more details.
-//
-// These fields can be safely ignored (there is no need to set them) for most countries. Some
-// limited number of countries behave like Italy - for these cases, if the leading zero(s) of a
-// number would be retained even when dialling internationally, set this flag to true, and also
-// set the number of leading zeros.
-//
-// Clients who use the parsing functionality of the i18n phone number libraries
-// will have these fields set if necessary automatically.
-  optional bool italian_leading_zero = 4;
-  optional int32 number_of_leading_zeros = 8 [ default = 1 ];
-
-// The next few fields are non-essential fields for a phone number. They retain extra information
-// about the form the phone number was in when it was provided to us to parse. They can be safely
-// ignored by most clients.
-
-// This field is used to store the raw input string containing phone numbers before it was
-// canonicalized by the library. For example, it could be used to store alphanumerical numbers
-// such as "1-800-GOOG-411".
-  optional string raw_input = 5;
-
-// The source from which the country_code is derived. This is not set in the general parsing method,
-// but in the method that parses and keeps raw_input. New fields could be added upon request.
-  enum CountryCodeSource {
-    // The country_code is derived based on a phone number with a leading "+", e.g. the French
-    // number "+33 1 42 68 53 00".
-    FROM_NUMBER_WITH_PLUS_SIGN = 1;
-
-    // The country_code is derived based on a phone number with a leading IDD, e.g. the French
-    // number "011 33 1 42 68 53 00", as it is dialled from US.
-    FROM_NUMBER_WITH_IDD = 5;
-
-    // The country_code is derived based on a phone number without a leading "+", e.g. the French
-    // number "33 1 42 68 53 00" when defaultCountry is supplied as France.
-    FROM_NUMBER_WITHOUT_PLUS_SIGN = 10;
-
-    // The country_code is derived NOT based on the phone number itself, but from the defaultCountry
-    // parameter provided in the parsing function by the clients. This happens mostly for numbers
-    // written in the national format (without country code). For example, this would be set when
-    // parsing the French number "01 42 68 53 00", when defaultCountry is supplied as France.
-    FROM_DEFAULT_COUNTRY = 20;
-  }
-
-// The source from which the country_code is derived.
-  optional CountryCodeSource country_code_source = 6;
-
-// The carrier selection code that is preferred when calling this phone number domestically. This
-// also includes codes that need to be dialed in some countries when calling from landlines to
-// mobiles or vice versa. For example, in Columbia, a "3" needs to be dialed before the phone number
-// itself when calling from a mobile phone to a domestic landline phone and vice versa.
-//
-// Note this is the "preferred" code, which means other codes may work as well.
-  optional string preferred_domestic_carrier_code = 7;
-}
-
-// Examples
-//
-// Google MTV, +1 650-253-0000, (650) 253-0000
-// country_code: 1
-// national_number: 6502530000
-//
-// Google Paris, +33 (0)1 42 68 53 00, 01 42 68 53 00
-// country_code: 33
-// national_number: 142685300
-//
-// Google Beijing, +86-10-62503000, (010) 62503000
-// country_code: 86
-// national_number: 1062503000
-//
-// Google Italy, +39 02-36618 300, 02-36618 300
-// country_code: 39
-// national_number: 236618300
-// italian_leading_zero: true