pg_query 4.2.1 → 6.1.0

data/ext/pg_query/include/datatype/timestamp.h

@@ -1,236 +0,0 @@
-/*-------------------------------------------------------------------------
- *
- * timestamp.h
- *	  Timestamp and Interval typedefs and related macros.
- *
- * Note: this file must be includable in both frontend and backend contexts.
- *
- * Portions Copyright (c) 1996-2022, PostgreSQL Global Development Group
- * Portions Copyright (c) 1994, Regents of the University of California
- *
- * src/include/datatype/timestamp.h
- *
- *-------------------------------------------------------------------------
- */
-#ifndef DATATYPE_TIMESTAMP_H
-#define DATATYPE_TIMESTAMP_H
-
-/*
- * Timestamp represents absolute time.
- *
- * Interval represents delta time. Keep track of months (and years), days,
- * and hours/minutes/seconds separately since the elapsed time spanned is
- * unknown until instantiated relative to an absolute time.
- *
- * Note that Postgres uses "time interval" to mean a bounded interval,
- * consisting of a beginning and ending time, not a time span - thomas 97/03/20
- *
- * Timestamps, as well as the h/m/s fields of intervals, are stored as
- * int64 values with units of microseconds.  (Once upon a time they were
- * double values with units of seconds.)
- *
- * TimeOffset and fsec_t are convenience typedefs for temporary variables.
- * Do not use fsec_t in values stored on-disk.
- * Also, fsec_t is only meant for *fractional* seconds; beware of overflow
- * if the value you need to store could be many seconds.
- */
-
-typedef int64 Timestamp;
-typedef int64 TimestampTz;
-typedef int64 TimeOffset;
-typedef int32 fsec_t;			/* fractional seconds (in microseconds) */
-
-
-/*
- * Storage format for type interval.
- */
-typedef struct
-{
-	TimeOffset	time;			/* all time units other than days, months and
-								 * years */
-	int32		day;			/* days, after time for alignment */
-	int32		month;			/* months and years, after time for alignment */
-} Interval;
-
-/*
- * Data structure representing a broken-down interval.
- *
- * For historical reasons, this is modeled on struct pg_tm for timestamps.
- * Unlike the situation for timestamps, there's no magic interpretation
- * needed for months or years: they're just zero or not.  Note that fields
- * can be negative; however, because of the divisions done while converting
- * from struct Interval, only tm_mday could be INT_MIN.  This is important
- * because we may need to negate the values in some code paths.
- */
-struct pg_itm
-{
-	int			tm_usec;
-	int			tm_sec;
-	int			tm_min;
-	int64		tm_hour;		/* needs to be wide */
-	int			tm_mday;
-	int			tm_mon;
-	int			tm_year;
-};
-
-/*
- * Data structure for decoding intervals.  We could just use struct pg_itm,
- * but then the requirement for tm_usec to be 64 bits would propagate to
- * places where it's not really needed.  Also, omitting the fields that
- * aren't used during decoding seems like a good error-prevention measure.
- */
-struct pg_itm_in
-{
-	int64		tm_usec;		/* needs to be wide */
-	int			tm_mday;
-	int			tm_mon;
-	int			tm_year;
-};
-
-
-/* Limits on the "precision" option (typmod) for these data types */
-#define MAX_TIMESTAMP_PRECISION 6
-#define MAX_INTERVAL_PRECISION 6
-
-/*
- *	Round off to MAX_TIMESTAMP_PRECISION decimal places.
- *	Note: this is also used for rounding off intervals.
- */
-#define TS_PREC_INV 1000000.0
-#define TSROUND(j) (rint(((double) (j)) * TS_PREC_INV) / TS_PREC_INV)
-
-
-/*
- * Assorted constants for datetime-related calculations
- */
-
-#define DAYS_PER_YEAR	365.25	/* assumes leap year every four years */
-#define MONTHS_PER_YEAR 12
-/*
- *	DAYS_PER_MONTH is very imprecise.  The more accurate value is
- *	365.2425/12 = 30.436875, or '30 days 10:29:06'.  Right now we only
- *	return an integral number of days, but someday perhaps we should
- *	also return a 'time' value to be used as well.  ISO 8601 suggests
- *	30 days.
- */
-#define DAYS_PER_MONTH	30		/* assumes exactly 30 days per month */
-#define HOURS_PER_DAY	24		/* assume no daylight savings time changes */
-
-/*
- *	This doesn't adjust for uneven daylight savings time intervals or leap
- *	seconds, and it crudely estimates leap years.  A more accurate value
- *	for days per years is 365.2422.
- */
-#define SECS_PER_YEAR	(36525 * 864)	/* avoid floating-point computation */
-#define SECS_PER_DAY	86400
-#define SECS_PER_HOUR	3600
-#define SECS_PER_MINUTE 60
-#define MINS_PER_HOUR	60
-
-#define USECS_PER_DAY	INT64CONST(86400000000)
-#define USECS_PER_HOUR	INT64CONST(3600000000)
-#define USECS_PER_MINUTE INT64CONST(60000000)
-#define USECS_PER_SEC	INT64CONST(1000000)
-
-/*
- * We allow numeric timezone offsets up to 15:59:59 either way from Greenwich.
- * Currently, the record holders for wackiest offsets in actual use are zones
- * Asia/Manila, at -15:56:00 until 1844, and America/Metlakatla, at +15:13:42
- * until 1867.  If we were to reject such values we would fail to dump and
- * restore old timestamptz values with these zone settings.
- */
-#define MAX_TZDISP_HOUR		15	/* maximum allowed hour part */
-#define TZDISP_LIMIT		((MAX_TZDISP_HOUR + 1) * SECS_PER_HOUR)
-
-/*
- * DT_NOBEGIN represents timestamp -infinity; DT_NOEND represents +infinity
- */
-#define DT_NOBEGIN		PG_INT64_MIN
-#define DT_NOEND		PG_INT64_MAX
-
-#define TIMESTAMP_NOBEGIN(j)	\
-	do {(j) = DT_NOBEGIN;} while (0)
-
-#define TIMESTAMP_IS_NOBEGIN(j) ((j) == DT_NOBEGIN)
-
-#define TIMESTAMP_NOEND(j)		\
-	do {(j) = DT_NOEND;} while (0)
-
-#define TIMESTAMP_IS_NOEND(j)	((j) == DT_NOEND)
-
-#define TIMESTAMP_NOT_FINITE(j) (TIMESTAMP_IS_NOBEGIN(j) || TIMESTAMP_IS_NOEND(j))
-
-
-/*
- * Julian date support.
- *
- * date2j() and j2date() nominally handle the Julian date range 0..INT_MAX,
- * or 4714-11-24 BC to 5874898-06-03 AD.  In practice, date2j() will work and
- * give correct negative Julian dates for dates before 4714-11-24 BC as well.
- * We rely on it to do so back to 4714-11-01 BC.  Allowing at least one day's
- * slop is necessary so that timestamp rotation doesn't produce dates that
- * would be rejected on input.  For example, '4714-11-24 00:00 GMT BC' is a
- * legal timestamptz value, but in zones east of Greenwich it would print as
- * sometime in the afternoon of 4714-11-23 BC; if we couldn't process such a
- * date we'd have a dump/reload failure.  So the idea is for IS_VALID_JULIAN
- * to accept a slightly wider range of dates than we really support, and
- * then we apply the exact checks in IS_VALID_DATE or IS_VALID_TIMESTAMP,
- * after timezone rotation if any.  To save a few cycles, we can make
- * IS_VALID_JULIAN check only to the month boundary, since its exact cutoffs
- * are not very critical in this scheme.
- *
- * It is correct that JULIAN_MINYEAR is -4713, not -4714; it is defined to
- * allow easy comparison to tm_year values, in which we follow the convention
- * that tm_year <= 0 represents abs(tm_year)+1 BC.
- */
-
-#define JULIAN_MINYEAR (-4713)
-#define JULIAN_MINMONTH (11)
-#define JULIAN_MINDAY (24)
-#define JULIAN_MAXYEAR (5874898)
-#define JULIAN_MAXMONTH (6)
-#define JULIAN_MAXDAY (3)
-
-#define IS_VALID_JULIAN(y,m,d) \
-	(((y) > JULIAN_MINYEAR || \
-	  ((y) == JULIAN_MINYEAR && ((m) >= JULIAN_MINMONTH))) && \
-	 ((y) < JULIAN_MAXYEAR || \
-	  ((y) == JULIAN_MAXYEAR && ((m) < JULIAN_MAXMONTH))))
-
-/* Julian-date equivalents of Day 0 in Unix and Postgres reckoning */
-#define UNIX_EPOCH_JDATE		2440588 /* == date2j(1970, 1, 1) */
-#define POSTGRES_EPOCH_JDATE	2451545 /* == date2j(2000, 1, 1) */
-
-/*
- * Range limits for dates and timestamps.
- *
- * We have traditionally allowed Julian day zero as a valid datetime value,
- * so that is the lower bound for both dates and timestamps.
- *
- * The upper limit for dates is 5874897-12-31, which is a bit less than what
- * the Julian-date code can allow.  For timestamps, the upper limit is
- * 294276-12-31.  The int64 overflow limit would be a few days later; again,
- * leaving some slop avoids worries about corner-case overflow, and provides
- * a simpler user-visible definition.
- */
-
-/* First allowed date, and first disallowed date, in Julian-date form */
-#define DATETIME_MIN_JULIAN (0)
-#define DATE_END_JULIAN (2147483494)	/* == date2j(JULIAN_MAXYEAR, 1, 1) */
-#define TIMESTAMP_END_JULIAN (109203528)	/* == date2j(294277, 1, 1) */
-
-/* Timestamp limits */
-#define MIN_TIMESTAMP	INT64CONST(-211813488000000000)
-/* == (DATETIME_MIN_JULIAN - POSTGRES_EPOCH_JDATE) * USECS_PER_DAY */
-#define END_TIMESTAMP	INT64CONST(9223371331200000000)
-/* == (TIMESTAMP_END_JULIAN - POSTGRES_EPOCH_JDATE) * USECS_PER_DAY */
-
-/* Range-check a date (given in Postgres, not Julian, numbering) */
-#define IS_VALID_DATE(d) \
-	((DATETIME_MIN_JULIAN - POSTGRES_EPOCH_JDATE) <= (d) && \
-	 (d) < (DATE_END_JULIAN - POSTGRES_EPOCH_JDATE))
-
-/* Range-check a timestamp */
-#define IS_VALID_TIMESTAMP(t)  (MIN_TIMESTAMP <= (t) && (t) < END_TIMESTAMP)
-
-#endif							/* DATATYPE_TIMESTAMP_H */

data/ext/pg_query/include/executor/execdesc.h

@@ -1,70 +0,0 @@
-/*-------------------------------------------------------------------------
- *
- * execdesc.h
- *	  plan and query descriptor accessor macros used by the executor
- *	  and related modules.
- *
- *
- * Portions Copyright (c) 1996-2022, PostgreSQL Global Development Group
- * Portions Copyright (c) 1994, Regents of the University of California
- *
- * src/include/executor/execdesc.h
- *
- *-------------------------------------------------------------------------
- */
-#ifndef EXECDESC_H
-#define EXECDESC_H
-
-#include "nodes/execnodes.h"
-#include "tcop/dest.h"
-
-
-/* ----------------
- *		query descriptor:
- *
- *	a QueryDesc encapsulates everything that the executor
- *	needs to execute the query.
- *
- *	For the convenience of SQL-language functions, we also support QueryDescs
- *	containing utility statements; these must not be passed to the executor
- *	however.
- * ---------------------
- */
-typedef struct QueryDesc
-{
-	/* These fields are provided by CreateQueryDesc */
-	CmdType		operation;		/* CMD_SELECT, CMD_UPDATE, etc. */
-	PlannedStmt *plannedstmt;	/* planner's output (could be utility, too) */
-	const char *sourceText;		/* source text of the query */
-	Snapshot	snapshot;		/* snapshot to use for query */
-	Snapshot	crosscheck_snapshot;	/* crosscheck for RI update/delete */
-	DestReceiver *dest;			/* the destination for tuple output */
-	ParamListInfo params;		/* param values being passed in */
-	QueryEnvironment *queryEnv; /* query environment passed in */
-	int			instrument_options; /* OR of InstrumentOption flags */
-
-	/* These fields are set by ExecutorStart */
-	TupleDesc	tupDesc;		/* descriptor for result tuples */
-	EState	   *estate;			/* executor's query-wide state */
-	PlanState  *planstate;		/* tree of per-plan-node state */
-
-	/* This field is set by ExecutorRun */
-	bool		already_executed;	/* true if previously executed */
-
-	/* This is always set NULL by the core system, but plugins can change it */
-	struct Instrumentation *totaltime;	/* total time spent in ExecutorRun */
-} QueryDesc;
-
-/* in pquery.c */
-extern QueryDesc *CreateQueryDesc(PlannedStmt *plannedstmt,
-								  const char *sourceText,
-								  Snapshot snapshot,
-								  Snapshot crosscheck_snapshot,
-								  DestReceiver *dest,
-								  ParamListInfo params,
-								  QueryEnvironment *queryEnv,
-								  int instrument_options);
-
-extern void FreeQueryDesc(QueryDesc *qdesc);
-
-#endif							/* EXECDESC_H  */