pango 2.2.4-x64-mingw32

data/vendor/local/include/unicode/normlzr.h

@@ -0,0 +1,797 @@
+/*
+ ********************************************************************
+ * COPYRIGHT:
+ * Copyright (c) 1996-2011, International Business Machines Corporation and
+ * others. All Rights Reserved.
+ ********************************************************************
+ */
+
+#ifndef NORMLZR_H
+#define NORMLZR_H
+
+#include "unicode/utypes.h"
+
+/**
+ * \file 
+ * \brief C++ API: Unicode Normalization
+ */
+ 
+#if !UCONFIG_NO_NORMALIZATION
+
+#include "unicode/chariter.h"
+#include "unicode/normalizer2.h"
+#include "unicode/unistr.h"
+#include "unicode/unorm.h"
+#include "unicode/uobject.h"
+
+U_NAMESPACE_BEGIN
+/**
+ * The Normalizer class supports the standard normalization forms described in
+ * <a href="http://www.unicode.org/unicode/reports/tr15/" target="unicode">
+ * Unicode Standard Annex #15: Unicode Normalization Forms</a>.
+ *
+ * Note: This API has been replaced by the Normalizer2 class and is only available
+ * for backward compatibility. This class simply delegates to the Normalizer2 class.
+ * There is one exception: The new API does not provide a replacement for Normalizer::compare().
+ *
+ * The Normalizer class consists of two parts:
+ * - static functions that normalize strings or test if strings are normalized
+ * - a Normalizer object is an iterator that takes any kind of text and
+ *   provides iteration over its normalized form
+ *
+ * The Normalizer class is not suitable for subclassing.
+ *
+ * For basic information about normalization forms and details about the C API
+ * please see the documentation in unorm.h.
+ *
+ * The iterator API with the Normalizer constructors and the non-static functions
+ * use a CharacterIterator as input. It is possible to pass a string which
+ * is then internally wrapped in a CharacterIterator.
+ * The input text is not normalized all at once, but incrementally where needed
+ * (providing efficient random access).
+ * This allows to pass in a large text but spend only a small amount of time
+ * normalizing a small part of that text.
+ * However, if the entire text is normalized, then the iterator will be
+ * slower than normalizing the entire text at once and iterating over the result.
+ * A possible use of the Normalizer iterator is also to report an index into the
+ * original text that is close to where the normalized characters come from.
+ *
+ * <em>Important:</em> The iterator API was cleaned up significantly for ICU 2.0.
+ * The earlier implementation reported the getIndex() inconsistently,
+ * and previous() could not be used after setIndex(), next(), first(), and current().
+ *
+ * Normalizer allows to start normalizing from anywhere in the input text by
+ * calling setIndexOnly(), first(), or last().
+ * Without calling any of these, the iterator will start at the beginning of the text.
+ *
+ * At any time, next() returns the next normalized code point (UChar32),
+ * with post-increment semantics (like CharacterIterator::next32PostInc()).
+ * previous() returns the previous normalized code point (UChar32),
+ * with pre-decrement semantics (like CharacterIterator::previous32()).
+ *
+ * current() returns the current code point
+ * (respectively the one at the newly set index) without moving
+ * the getIndex(). Note that if the text at the current position
+ * needs to be normalized, then these functions will do that.
+ * (This is why current() is not const.)
+ * It is more efficient to call setIndexOnly() instead, which does not
+ * normalize.
+ *
+ * getIndex() always refers to the position in the input text where the normalized
+ * code points are returned from. It does not always change with each returned
+ * code point.
+ * The code point that is returned from any of the functions
+ * corresponds to text at or after getIndex(), according to the
+ * function's iteration semantics (post-increment or pre-decrement).
+ *
+ * next() returns a code point from at or after the getIndex()
+ * from before the next() call. After the next() call, the getIndex()
+ * might have moved to where the next code point will be returned from
+ * (from a next() or current() call).
+ * This is semantically equivalent to array access with array[index++]
+ * (post-increment semantics).
+ *
+ * previous() returns a code point from at or after the getIndex()
+ * from after the previous() call.
+ * This is semantically equivalent to array access with array[--index]
+ * (pre-decrement semantics).
+ *
+ * Internally, the Normalizer iterator normalizes a small piece of text
+ * starting at the getIndex() and ending at a following "safe" index.
+ * The normalized results is stored in an internal string buffer, and
+ * the code points are iterated from there.
+ * With multiple iteration calls, this is repeated until the next piece
+ * of text needs to be normalized, and the getIndex() needs to be moved.
+ *
+ * The following "safe" index, the internal buffer, and the secondary
+ * iteration index into that buffer are not exposed on the API.
+ * This also means that it is currently not practical to return to
+ * a particular, arbitrary position in the text because one would need to
+ * know, and be able to set, in addition to the getIndex(), at least also the
+ * current index into the internal buffer.
+ * It is currently only possible to observe when getIndex() changes
+ * (with careful consideration of the iteration semantics),
+ * at which time the internal index will be 0.
+ * For example, if getIndex() is different after next() than before it,
+ * then the internal index is 0 and one can return to this getIndex()
+ * later with setIndexOnly().
+ *
+ * Note: While the setIndex() and getIndex() refer to indices in the
+ * underlying Unicode input text, the next() and previous() methods
+ * iterate through characters in the normalized output.
+ * This means that there is not necessarily a one-to-one correspondence
+ * between characters returned by next() and previous() and the indices
+ * passed to and returned from setIndex() and getIndex().
+ * It is for this reason that Normalizer does not implement the CharacterIterator interface.
+ *
+ * @author Laura Werner, Mark Davis, Markus Scherer
+ * @stable ICU 2.0
+ */
+class U_COMMON_API Normalizer : public UObject {
+public:
+  /**
+   * If DONE is returned from an iteration function that returns a code point,
+   * then there are no more normalization results available.
+   * @stable ICU 2.0
+   */
+  enum {
+      DONE=0xffff
+  };
+
+  // Constructors
+
+  /**
+   * Creates a new <code>Normalizer</code> object for iterating over the
+   * normalized form of a given string.
+   * <p>
+   * @param str   The string to be normalized.  The normalization
+   *              will start at the beginning of the string.
+   *
+   * @param mode  The normalization mode.
+   * @stable ICU 2.0
+   */
+  Normalizer(const UnicodeString& str, UNormalizationMode mode);
+
+  /**
+   * Creates a new <code>Normalizer</code> object for iterating over the
+   * normalized form of a given string.
+   * <p>
+   * @param str   The string to be normalized.  The normalization
+   *              will start at the beginning of the string.
+   *
+   * @param length Length of the string, or -1 if NUL-terminated.
+   * @param mode  The normalization mode.
+   * @stable ICU 2.0
+   */
+  Normalizer(const UChar* str, int32_t length, UNormalizationMode mode);
+
+  /**
+   * Creates a new <code>Normalizer</code> object for iterating over the
+   * normalized form of the given text.
+   * <p>
+   * @param iter  The input text to be normalized.  The normalization
+   *              will start at the beginning of the string.
+   *
+   * @param mode  The normalization mode.
+   * @stable ICU 2.0
+   */
+  Normalizer(const CharacterIterator& iter, UNormalizationMode mode);
+
+  /**
+   * Copy constructor.
+   * @param copy The object to be copied.
+   * @stable ICU 2.0
+   */
+  Normalizer(const Normalizer& copy);
+
+  /**
+   * Destructor
+   * @stable ICU 2.0
+   */
+  virtual ~Normalizer();
+
+
+  //-------------------------------------------------------------------------
+  // Static utility methods
+  //-------------------------------------------------------------------------
+
+  /**
+   * Normalizes a <code>UnicodeString</code> according to the specified normalization mode.
+   * This is a wrapper for unorm_normalize(), using UnicodeString's.
+   *
+   * The <code>options</code> parameter specifies which optional
+   * <code>Normalizer</code> features are to be enabled for this operation.
+   *
+   * @param source    the input string to be normalized.
+   * @param mode      the normalization mode
+   * @param options   the optional features to be enabled (0 for no options)
+   * @param result    The normalized string (on output).
+   * @param status    The error code.
+   * @stable ICU 2.0
+   */
+  static void U_EXPORT2 normalize(const UnicodeString& source,
+                        UNormalizationMode mode, int32_t options,
+                        UnicodeString& result,
+                        UErrorCode &status);
+
+  /**
+   * Compose a <code>UnicodeString</code>.
+   * This is equivalent to normalize() with mode UNORM_NFC or UNORM_NFKC.
+   * This is a wrapper for unorm_normalize(), using UnicodeString's.
+   *
+   * The <code>options</code> parameter specifies which optional
+   * <code>Normalizer</code> features are to be enabled for this operation.
+   *
+   * @param source    the string to be composed.
+   * @param compat    Perform compatibility decomposition before composition.
+   *                  If this argument is <code>FALSE</code>, only canonical
+   *                  decomposition will be performed.
+   * @param options   the optional features to be enabled (0 for no options)
+   * @param result    The composed string (on output).
+   * @param status    The error code.
+   * @stable ICU 2.0
+   */
+  static void U_EXPORT2 compose(const UnicodeString& source,
+                      UBool compat, int32_t options,
+                      UnicodeString& result,
+                      UErrorCode &status);
+
+  /**
+   * Static method to decompose a <code>UnicodeString</code>.
+   * This is equivalent to normalize() with mode UNORM_NFD or UNORM_NFKD.
+   * This is a wrapper for unorm_normalize(), using UnicodeString's.
+   *
+   * The <code>options</code> parameter specifies which optional
+   * <code>Normalizer</code> features are to be enabled for this operation.
+   *
+   * @param source    the string to be decomposed.
+   * @param compat    Perform compatibility decomposition.
+   *                  If this argument is <code>FALSE</code>, only canonical
+   *                  decomposition will be performed.
+   * @param options   the optional features to be enabled (0 for no options)
+   * @param result    The decomposed string (on output).
+   * @param status    The error code.
+   * @stable ICU 2.0
+   */
+  static void U_EXPORT2 decompose(const UnicodeString& source,
+                        UBool compat, int32_t options,
+                        UnicodeString& result,
+                        UErrorCode &status);
+
+  /**
+   * Performing quick check on a string, to quickly determine if the string is
+   * in a particular normalization format.
+   * This is a wrapper for unorm_quickCheck(), using a UnicodeString.
+   *
+   * Three types of result can be returned UNORM_YES, UNORM_NO or
+   * UNORM_MAYBE. Result UNORM_YES indicates that the argument
+   * string is in the desired normalized format, UNORM_NO determines that
+   * argument string is not in the desired normalized format. A
+   * UNORM_MAYBE result indicates that a more thorough check is required,
+   * the user may have to put the string in its normalized form and compare the
+   * results.
+   * @param source       string for determining if it is in a normalized format
+   * @param mode         normalization format
+   * @param status A reference to a UErrorCode to receive any errors
+   * @return UNORM_YES, UNORM_NO or UNORM_MAYBE
+   *
+   * @see isNormalized
+   * @stable ICU 2.0
+   */
+  static inline UNormalizationCheckResult
+  quickCheck(const UnicodeString &source, UNormalizationMode mode, UErrorCode &status);
+
+  /**
+   * Performing quick check on a string; same as the other version of quickCheck
+   * but takes an extra options parameter like most normalization functions.
+   *
+   * @param source       string for determining if it is in a normalized format
+   * @param mode         normalization format
+   * @param options      the optional features to be enabled (0 for no options)
+   * @param status A reference to a UErrorCode to receive any errors
+   * @return UNORM_YES, UNORM_NO or UNORM_MAYBE
+   *
+   * @see isNormalized
+   * @stable ICU 2.6
+   */
+  static UNormalizationCheckResult
+  quickCheck(const UnicodeString &source, UNormalizationMode mode, int32_t options, UErrorCode &status);
+
+  /**
+   * Test if a string is in a given normalization form.
+   * This is semantically equivalent to source.equals(normalize(source, mode)) .
+   *
+   * Unlike unorm_quickCheck(), this function returns a definitive result,
+   * never a "maybe".
+   * For NFD, NFKD, and FCD, both functions work exactly the same.
+   * For NFC and NFKC where quickCheck may return "maybe", this function will
+   * perform further tests to arrive at a TRUE/FALSE result.
+   *
+   * @param src        String that is to be tested if it is in a normalization format.
+   * @param mode       Which normalization form to test for.
+   * @param errorCode  ICU error code in/out parameter.
+   *                   Must fulfill U_SUCCESS before the function call.
+   * @return Boolean value indicating whether the source string is in the
+   *         "mode" normalization form.
+   *
+   * @see quickCheck
+   * @stable ICU 2.2
+   */
+  static inline UBool
+  isNormalized(const UnicodeString &src, UNormalizationMode mode, UErrorCode &errorCode);
+
+  /**
+   * Test if a string is in a given normalization form; same as the other version of isNormalized
+   * but takes an extra options parameter like most normalization functions.
+   *
+   * @param src        String that is to be tested if it is in a normalization format.
+   * @param mode       Which normalization form to test for.
+   * @param options      the optional features to be enabled (0 for no options)
+   * @param errorCode  ICU error code in/out parameter.
+   *                   Must fulfill U_SUCCESS before the function call.
+   * @return Boolean value indicating whether the source string is in the
+   *         "mode" normalization form.
+   *
+   * @see quickCheck
+   * @stable ICU 2.6
+   */
+  static UBool
+  isNormalized(const UnicodeString &src, UNormalizationMode mode, int32_t options, UErrorCode &errorCode);
+
+  /**
+   * Concatenate normalized strings, making sure that the result is normalized as well.
+   *
+   * If both the left and the right strings are in
+   * the normalization form according to "mode/options",
+   * then the result will be
+   *
+   * \code
+   *     dest=normalize(left+right, mode, options)
+   * \endcode
+   *
+   * For details see unorm_concatenate in unorm.h.
+   *
+   * @param left Left source string.
+   * @param right Right source string.
+   * @param result The output string.
+   * @param mode The normalization mode.
+   * @param options A bit set of normalization options.
+   * @param errorCode ICU error code in/out parameter.
+   *                   Must fulfill U_SUCCESS before the function call.
+   * @return result
+   *
+   * @see unorm_concatenate
+   * @see normalize
+   * @see unorm_next
+   * @see unorm_previous
+   *
+   * @stable ICU 2.1
+   */
+  static UnicodeString &
+  U_EXPORT2 concatenate(const UnicodeString &left, const UnicodeString &right,
+              UnicodeString &result,
+              UNormalizationMode mode, int32_t options,
+              UErrorCode &errorCode);
+
+  /**
+   * Compare two strings for canonical equivalence.
+   * Further options include case-insensitive comparison and
+   * code point order (as opposed to code unit order).
+   *
+   * Canonical equivalence between two strings is defined as their normalized
+   * forms (NFD or NFC) being identical.
+   * This function compares strings incrementally instead of normalizing
+   * (and optionally case-folding) both strings entirely,
+   * improving performance significantly.
+   *
+   * Bulk normalization is only necessary if the strings do not fulfill the FCD
+   * conditions. Only in this case, and only if the strings are relatively long,
+   * is memory allocated temporarily.
+   * For FCD strings and short non-FCD strings there is no memory allocation.
+   *
+   * Semantically, this is equivalent to
+   *   strcmp[CodePointOrder](NFD(foldCase(s1)), NFD(foldCase(s2)))
+   * where code point order and foldCase are all optional.
+   *
+   * UAX 21 2.5 Caseless Matching specifies that for a canonical caseless match
+   * the case folding must be performed first, then the normalization.
+   *
+   * @param s1 First source string.
+   * @param s2 Second source string.
+   *
+   * @param options A bit set of options:
+   *   - U_FOLD_CASE_DEFAULT or 0 is used for default options:
+   *     Case-sensitive comparison in code unit order, and the input strings
+   *     are quick-checked for FCD.
+   *
+   *   - UNORM_INPUT_IS_FCD
+   *     Set if the caller knows that both s1 and s2 fulfill the FCD conditions.
+   *     If not set, the function will quickCheck for FCD
+   *     and normalize if necessary.
+   *
+   *   - U_COMPARE_CODE_POINT_ORDER
+   *     Set to choose code point order instead of code unit order
+   *     (see u_strCompare for details).
+   *
+   *   - U_COMPARE_IGNORE_CASE
+   *     Set to compare strings case-insensitively using case folding,
+   *     instead of case-sensitively.
+   *     If set, then the following case folding options are used.
+   *
+   *   - Options as used with case-insensitive comparisons, currently:
+   *
+   *   - U_FOLD_CASE_EXCLUDE_SPECIAL_I
+   *    (see u_strCaseCompare for details)
+   *
+   *   - regular normalization options shifted left by UNORM_COMPARE_NORM_OPTIONS_SHIFT
+   *
+   * @param errorCode ICU error code in/out parameter.
+   *                  Must fulfill U_SUCCESS before the function call.
+   * @return <0 or 0 or >0 as usual for string comparisons
+   *
+   * @see unorm_compare
+   * @see normalize
+   * @see UNORM_FCD
+   * @see u_strCompare
+   * @see u_strCaseCompare
+   *
+   * @stable ICU 2.2
+   */
+  static inline int32_t
+  compare(const UnicodeString &s1, const UnicodeString &s2,
+          uint32_t options,
+          UErrorCode &errorCode);
+
+  //-------------------------------------------------------------------------
+  // Iteration API
+  //-------------------------------------------------------------------------
+
+  /**
+   * Return the current character in the normalized text.
+   * current() may need to normalize some text at getIndex().
+   * The getIndex() is not changed.
+   *
+   * @return the current normalized code point
+   * @stable ICU 2.0
+   */
+  UChar32              current(void);
+
+  /**
+   * Return the first character in the normalized text.
+   * This is equivalent to setIndexOnly(startIndex()) followed by next().
+   * (Post-increment semantics.)
+   *
+   * @return the first normalized code point
+   * @stable ICU 2.0
+   */
+  UChar32              first(void);
+
+  /**
+   * Return the last character in the normalized text.
+   * This is equivalent to setIndexOnly(endIndex()) followed by previous().
+   * (Pre-decrement semantics.)
+   *
+   * @return the last normalized code point
+   * @stable ICU 2.0
+   */
+  UChar32              last(void);
+
+  /**
+   * Return the next character in the normalized text.
+   * (Post-increment semantics.)
+   * If the end of the text has already been reached, DONE is returned.
+   * The DONE value could be confused with a U+FFFF non-character code point
+   * in the text. If this is possible, you can test getIndex()<endIndex()
+   * before calling next(), or (getIndex()<endIndex() || last()!=DONE)
+   * after calling next(). (Calling last() will change the iterator state!)
+   *
+   * The C API unorm_next() is more efficient and does not have this ambiguity.
+   *
+   * @return the next normalized code point
+   * @stable ICU 2.0
+   */
+  UChar32              next(void);
+
+  /**
+   * Return the previous character in the normalized text and decrement.
+   * (Pre-decrement semantics.)
+   * If the beginning of the text has already been reached, DONE is returned.
+   * The DONE value could be confused with a U+FFFF non-character code point
+   * in the text. If this is possible, you can test
+   * (getIndex()>startIndex() || first()!=DONE). (Calling first() will change
+   * the iterator state!)
+   *
+   * The C API unorm_previous() is more efficient and does not have this ambiguity.
+   *
+   * @return the previous normalized code point
+   * @stable ICU 2.0
+   */
+  UChar32              previous(void);
+
+  /**
+   * Set the iteration position in the input text that is being normalized,
+   * without any immediate normalization.
+   * After setIndexOnly(), getIndex() will return the same index that is
+   * specified here.
+   *
+   * @param index the desired index in the input text.
+   * @stable ICU 2.0
+   */
+  void                 setIndexOnly(int32_t index);
+
+  /**
+   * Reset the index to the beginning of the text.
+   * This is equivalent to setIndexOnly(startIndex)).
+   * @stable ICU 2.0
+   */
+  void                reset(void);
+
+  /**
+   * Retrieve the current iteration position in the input text that is
+   * being normalized.
+   *
+   * A following call to next() will return a normalized code point from
+   * the input text at or after this index.
+   *
+   * After a call to previous(), getIndex() will point at or before the
+   * position in the input text where the normalized code point
+   * was returned from with previous().
+   *
+   * @return the current index in the input text
+   * @stable ICU 2.0
+   */
+  int32_t            getIndex(void) const;
+
+  /**
+   * Retrieve the index of the start of the input text. This is the begin index
+   * of the <code>CharacterIterator</code> or the start (i.e. index 0) of the string
+   * over which this <code>Normalizer</code> is iterating.
+   *
+   * @return the smallest index in the input text where the Normalizer operates
+   * @stable ICU 2.0
+   */
+  int32_t            startIndex(void) const;
+
+  /**
+   * Retrieve the index of the end of the input text. This is the end index
+   * of the <code>CharacterIterator</code> or the length of the string
+   * over which this <code>Normalizer</code> is iterating.
+   * This end index is exclusive, i.e., the Normalizer operates only on characters
+   * before this index.
+   *
+   * @return the first index in the input text where the Normalizer does not operate
+   * @stable ICU 2.0
+   */
+  int32_t            endIndex(void) const;
+
+  /**
+   * Returns TRUE when both iterators refer to the same character in the same
+   * input text.
+   *
+   * @param that a Normalizer object to compare this one to
+   * @return comparison result
+   * @stable ICU 2.0
+   */
+  UBool        operator==(const Normalizer& that) const;
+
+  /**
+   * Returns FALSE when both iterators refer to the same character in the same
+   * input text.
+   *
+   * @param that a Normalizer object to compare this one to
+   * @return comparison result
+   * @stable ICU 2.0
+   */
+  inline UBool        operator!=(const Normalizer& that) const;
+
+  /**
+   * Returns a pointer to a new Normalizer that is a clone of this one.
+   * The caller is responsible for deleting the new clone.
+   * @return a pointer to a new Normalizer
+   * @stable ICU 2.0
+   */
+  Normalizer*        clone(void) const;
+
+  /**
+   * Generates a hash code for this iterator.
+   *
+   * @return the hash code
+   * @stable ICU 2.0
+   */
+  int32_t                hashCode(void) const;
+
+  //-------------------------------------------------------------------------
+  // Property access methods
+  //-------------------------------------------------------------------------
+
+  /**
+   * Set the normalization mode for this object.
+   * <p>
+   * <b>Note:</b>If the normalization mode is changed while iterating
+   * over a string, calls to {@link #next() } and {@link #previous() } may
+   * return previously buffers characters in the old normalization mode
+   * until the iteration is able to re-sync at the next base character.
+   * It is safest to call {@link #setIndexOnly }, {@link #reset() },
+   * {@link #setText }, {@link #first() },
+   * {@link #last() }, etc. after calling <code>setMode</code>.
+   * <p>
+   * @param newMode the new mode for this <code>Normalizer</code>.
+   * @see #getUMode
+   * @stable ICU 2.0
+   */
+  void setMode(UNormalizationMode newMode);
+
+  /**
+   * Return the normalization mode for this object.
+   *
+   * This is an unusual name because there used to be a getMode() that
+   * returned a different type.
+   *
+   * @return the mode for this <code>Normalizer</code>
+   * @see #setMode
+   * @stable ICU 2.0
+   */
+  UNormalizationMode getUMode(void) const;
+
+  /**
+   * Set options that affect this <code>Normalizer</code>'s operation.
+   * Options do not change the basic composition or decomposition operation
+   * that is being performed, but they control whether
+   * certain optional portions of the operation are done.
+   * Currently the only available option is obsolete.
+   *
+   * It is possible to specify multiple options that are all turned on or off.
+   *
+   * @param   option  the option(s) whose value is/are to be set.
+   * @param   value   the new setting for the option.  Use <code>TRUE</code> to
+   *                  turn the option(s) on and <code>FALSE</code> to turn it/them off.
+   *
+   * @see #getOption
+   * @stable ICU 2.0
+   */
+  void setOption(int32_t option,
+         UBool value);
+
+  /**
+   * Determine whether an option is turned on or off.
+   * If multiple options are specified, then the result is TRUE if any
+   * of them are set.
+   * <p>
+   * @param option the option(s) that are to be checked
+   * @return TRUE if any of the option(s) are set
+   * @see #setOption
+   * @stable ICU 2.0
+   */
+  UBool getOption(int32_t option) const;
+
+  /**
+   * Set the input text over which this <code>Normalizer</code> will iterate.
+   * The iteration position is set to the beginning.
+   *
+   * @param newText a string that replaces the current input text
+   * @param status a UErrorCode
+   * @stable ICU 2.0
+   */
+  void setText(const UnicodeString& newText,
+           UErrorCode &status);
+
+  /**
+   * Set the input text over which this <code>Normalizer</code> will iterate.
+   * The iteration position is set to the beginning.
+   *
+   * @param newText a CharacterIterator object that replaces the current input text
+   * @param status a UErrorCode
+   * @stable ICU 2.0
+   */
+  void setText(const CharacterIterator& newText,
+           UErrorCode &status);
+
+  /**
+   * Set the input text over which this <code>Normalizer</code> will iterate.
+   * The iteration position is set to the beginning.
+   *
+   * @param newText a string that replaces the current input text
+   * @param length the length of the string, or -1 if NUL-terminated
+   * @param status a UErrorCode
+   * @stable ICU 2.0
+   */
+  void setText(const UChar* newText,
+                    int32_t length,
+            UErrorCode &status);
+  /**
+   * Copies the input text into the UnicodeString argument.
+   *
+   * @param result Receives a copy of the text under iteration.
+   * @stable ICU 2.0
+   */
+  void            getText(UnicodeString&  result);
+
+  /**
+   * ICU "poor man's RTTI", returns a UClassID for this class.
+   * @returns a UClassID for this class.
+   * @stable ICU 2.2
+   */
+  static UClassID U_EXPORT2 getStaticClassID();
+
+  /**
+   * ICU "poor man's RTTI", returns a UClassID for the actual class.
+   * @return a UClassID for the actual class.
+   * @stable ICU 2.2
+   */
+  virtual UClassID getDynamicClassID() const;
+
+private:
+  //-------------------------------------------------------------------------
+  // Private functions
+  //-------------------------------------------------------------------------
+
+  Normalizer(); // default constructor not implemented
+  Normalizer &operator=(const Normalizer &that); // assignment operator not implemented
+
+  // Private utility methods for iteration
+  // For documentation, see the source code
+  UBool nextNormalize();
+  UBool previousNormalize();
+
+  void    init();
+  void    clearBuffer(void);
+
+  //-------------------------------------------------------------------------
+  // Private data
+  //-------------------------------------------------------------------------
+
+  FilteredNormalizer2*fFilteredNorm2;  // owned if not NULL
+  const Normalizer2  *fNorm2;  // not owned; may be equal to fFilteredNorm2
+  UNormalizationMode  fUMode;
+  int32_t             fOptions;
+
+  // The input text and our position in it
+  CharacterIterator  *text;
+
+  // The normalization buffer is the result of normalization
+  // of the source in [currentIndex..nextIndex[ .
+  int32_t         currentIndex, nextIndex;
+
+  // A buffer for holding intermediate results
+  UnicodeString       buffer;
+  int32_t         bufferPos;
+};
+
+//-------------------------------------------------------------------------
+// Inline implementations
+//-------------------------------------------------------------------------
+
+inline UBool
+Normalizer::operator!= (const Normalizer& other) const
+{ return ! operator==(other); }
+
+inline UNormalizationCheckResult
+Normalizer::quickCheck(const UnicodeString& source,
+                       UNormalizationMode mode,
+                       UErrorCode &status) {
+    return quickCheck(source, mode, 0, status);
+}
+
+inline UBool
+Normalizer::isNormalized(const UnicodeString& source,
+                         UNormalizationMode mode,
+                         UErrorCode &status) {
+    return isNormalized(source, mode, 0, status);
+}
+
+inline int32_t
+Normalizer::compare(const UnicodeString &s1, const UnicodeString &s2,
+                    uint32_t options,
+                    UErrorCode &errorCode) {
+  // all argument checking is done in unorm_compare
+  return unorm_compare(s1.getBuffer(), s1.length(),
+                       s2.getBuffer(), s2.length(),
+                       options,
+                       &errorCode);
+}
+
+U_NAMESPACE_END
+
+#endif /* #if !UCONFIG_NO_NORMALIZATION */
+
+#endif // NORMLZR_H