pango 2.2.4-x64-mingw32

data/vendor/local/share/man/man8/genccode.8

@@ -0,0 +1,106 @@
+.\" Hey, Emacs! This is -*-nroff-*- you know...
+.\"
+.\" genccode.8: manual page for the gennames utility
+.\"
+.\" Copyright (C) 2003-2004 IBM, Inc. and others.
+.\"
+.TH GENCCODE 8 "11 March 2004" "ICU MANPAGE" "ICU 54.1 Manual"
+.SH NAME
+.B genccode
+\- generate C or platform specific assembly code from an ICU data file.
+.SH SYNOPSIS
+.B genccode
+[
+.BR "\-h\fP, \fB\-?\fP, \fB\-\-help"
+]
+[
+.BI "\-a\fP, \fB\-\-assembly" " name"
+]
+[
+.BI "\-d\fP, \fB\-\-destdir" " destination"
+]
+[
+.BI "\-n\fP, \fB\-\-name" " name"
+]
+[
+.BI "\-e\fP, \fB\-\-entrypoint" " name"
+]
+[
+.BI "\-f\fP, \fB\-\-filename" " name"
+]
+[
+.IR filename " .\|.\|."
+]
+.SH DESCRIPTION
+.B genccode
+reads each of the supplied
+.I filename
+and writes out a C file containing a compilable definition of the data in
+the data file.
+The C file name is made by taking the base name of the data
+.IR filename ,
+replacing dots by underscores, and adding a
+.I .c
+file extension.
+.PP
+If the \fB-a\fP option is used, platform specific assembly
+code is generated instead of C code.
+Most C compilers will accept both C and assembly files.
+Instead of writing a filename with a
+.I .c
+file extension, a filename with a
+.I .s
+will be written instead.
+.PP
+If
+.B genccode
+is called with no
+.I filename
+it terminates gracefully.
+.SH OPTIONS
+.TP
+.BR "\-h\fP, \fB\-?\fP, \fB\-\-help"
+Print help about usage and exit.
+.TP
+.BI "\-a\fP, \fB\-\-assembly" " name"
+Output assembly code instead of C code.
+Use \fB-h\fP to see the list of available types of assembly to generate and
+to specify for this option.
+.TP
+.BI "\-d\fP, \fB\-\-destdir" " destination"
+Set the destination directory to
+.IR destination .
+The default destination directory is the current directory.
+.TP
+.BI "\-n\fP, \fB\-\-name" " name"
+Set the data name to
+.I name
+instead of the default. This name is also used as the base name of the
+output. The default name is made of the
+.I icudt
+prefix, followed by a two-digit version number corresponding to
+the current version of the ICU release, and a single letter indicating
+the endianness of the data (the letter
+.I b
+indicated big endian data, and the letter
+.I l
+indicates little endian ones).
+.TP
+.BI "\-f\fP, \fB\-\-filename" " name"
+Normally, an ICU data file such as mydata.icu will be turned into mydata_icu.c and mydata_icu.o.
+However, if this parameter was set to "somedata", the output files will be somedata.o and 
+somedata.c, respectively.
+.TP
+.BI "\-e\fP, \fB\-\-entrypoint" " name"
+Set the data entry point (used for linking against the data in a
+shared library form) to
+.IR name .
+The default entry point name is made of the data (set by the
+.BI "\-n\fP, \fB\-\-name"
+option) followed by an underscore and the type of the data (set by the
+.BI "\-t\fP, \fB\-\-type"
+option).
+.SH VERSION
+54.1
+.SH COPYRIGHT
+Copyright (C) 2000-2004 IBM, Inc. and others.

data/vendor/local/share/man/man8/gencmn.8

@@ -0,0 +1,129 @@
+.\" Hey, Emacs! This is -*-nroff-*- you know...
+.\"
+.\" gencmn.8: manual page for the gencmn utility
+.\"
+.\" Copyright (C) 2000-2001 IBM, Inc. and others.
+.\"
+.\" Manual page by Yves Arrouye <yves@realnames.com>.
+.\"
+.TH GENCMN 8 "5 November 2001" "ICU MANPAGE" "ICU 54.1 Manual"
+.SH NAME
+.B gencmn
+\- generate an ICU memory-mappable data file
+.SH SYNOPSIS
+.B gencmn
+[
+.BR "\-h\fP, \fB\-?\fP, \fB\-\-help"
+]
+[
+.BR "\-v\fP, \fB\-\-verbose"
+]
+[
+.BR "\-c\fP, \fB\-\-copyright"
+|
+.BI "\-C\fP, \fB\-\-comment" " comment"
+]
+[
+.BI "\-d\fP, \fB\-\-destdir" " destination"
+]
+[
+.BI "\-n\fP, \fB\-\-name" " name"
+]
+[
+.BI "\-t\fP, \fB\-\-type" " fileext"
+]
+[
+.BI "\-S\fP, \fB\-\-source"
+]
+[
+.BI "\-e\fP, \fB\-\-entrypoint" " name"
+]
+.I maxsize
+[
+.I listfilename
+]
+.SH DESCRIPTION
+.B gencmn
+takes a set of files and packages them as an ICU memory-mappable data
+file. The resulting data file can then be used directly by ICU.
+.PP
+.B gencmn
+reads a list of files to be packaged from either the
+supplied
+.I listfilename
+file, or from its standard output. It packages all the files from
+the list that are not bigger than
+.I maxsize
+bytes, except if
+.I maxsize
+is 0, which indicates that there is no size limit on files.
+.SH OPTIONS
+.TP
+.BR "\-h\fP, \fB\-?\fP, \fB\-\-help"
+Print help about usage and exit.
+.TP
+.BR "\-v\fP, \fB\-\-verbose"
+Display extra informative messages during execution.
+.TP
+.BR \-c\fP, \fB\-\-copyright
+Include the ICU copyright notice in the resulting data.
+.TP
+.BI "\-C\fP, \fB\-\-comment" " comment"
+Include the specified
+.I comment
+in the resulting data instead of the ICU copyright notice. 
+.TP
+.BI "\-d\fP, \fB\-\-destdir" " destination"
+Set the destination directory to
+.IR destination .
+The default destination directory is specified by the environment variable
+.BR ICU_DATA .
+.TP
+.BI "\-n\fP, \fB\-\-name" " name"
+Set the data name to
+.I name
+instead of the default. This name is also used as the base name of the
+output. The default name is made of the
+.I icudt
+prefix, followed by a two-digit version number corresponding to
+the current version of the ICU release, and a single letter indicating
+the endianness of the data (the letter
+.I b
+indicated big endian data, and the letter
+.I l
+indicates little endian ones).
+.TP
+.BI "\-t\fP, \fB\-\-type" " type"
+Use
+.I type
+as the type of the data. This type is also used as the extension of
+the generated data file. The default type ie
+.IR dat .
+.TP
+.BI "\-S\fP, \fB\-\-source"
+Write a C source file with the table of contents of the data.
+.TP
+.BI "\-e\fP, \fB\-\-entrypoint" " name"
+Set the data entry point (used for linking against the data in a
+shared library form) to
+.IR name .
+The default entry point name is made of the data (set by the
+.BI "\-n\fP, \fB\-\-name"
+option) followed by an underscore and the type of the data (set by the
+.BI "\-t\fP, \fB\-\-type"
+option).
+.SH ENVIRONMENT
+.TP 10
+.B ICU_DATA
+Specifies the directory containing ICU data. Defaults to
+.BR ${prefix}/share/icu/54.1/ .
+Some tools in ICU depend on the presence of the trailing slash. It is thus
+important to make sure that it is present if
+.B ICU_DATA
+is set.
+.SH VERSION
+54.1
+.SH COPYRIGHT
+Copyright (C) 2000-2001 IBM, Inc. and others.
+.SH SEE ALSO
+.BR decmn (8)

data/vendor/local/share/man/man8/gensprep.8

@@ -0,0 +1,102 @@
+.\" Hey, Emacs! This is -*-nroff-*- you know...
+.\"
+.\" gensprep.8: manual page for the gensprep utility
+.\"
+.\" Copyright (C) 2003 IBM, Inc. and others.
+.\"
+.TH gensprep 8 "18 March 2003" "ICU MANPAGE" "ICU 54.1 Manual"
+.SH NAME
+.B gensprep
+\- compile StringPrep data from files filtered by filterRFC3454.pl 
+.SH SYNOPSIS
+.B gensprep
+[
+.BR "\-h\fP, \fB\-?\fP, \fB\-\-help"
+]
+[
+.BR "\-v\fP, \fB\-\-verbose"
+]
+[
+.BI "\-c\fP, \fB\-\-copyright"
+]
+[
+.BI "\-s\fP, \fB\-\-sourcedir" " source"
+]
+[
+.BI "\-d\fP, \fB\-\-destdir" " destination"
+]
+.SH DESCRIPTION
+.B gensprep
+reads filtered RFC 3454 files and compiles their
+information into a binary form.
+The resulting file,
+.BR <name>.icu ,
+can then be read directly by ICU, or used by
+.BR pkgdata (8)
+for incorporation into a larger archive or library.
+.LP
+The files read by
+.B gensprep
+are described in the
+.B FILES
+section. 
+.SH OPTIONS
+.TP
+.BR "\-h\fP, \fB\-?\fP, \fB\-\-help"
+Print help about usage and exit.
+.TP
+.BR "\-v\fP, \fB\-\-verbose"
+Display extra informative messages during execution.
+.TP
+.BI "\-c\fP, \fB\-\-copyright"
+Include a copyright notice into the binary data.
+.TP
+.BI "\-s\fP, \fB\-\-sourcedir" " source"
+Set the source directory to
+.IR source .
+The default source directory is specified by the environment variable
+.BR ICU_DATA .
+.TP
+.BI "\-d\fP, \fB\-\-destdir" " destination"
+Set the destination directory to
+.IR destination .
+The default destination directory is specified by the environment variable
+.BR ICU_DATA .
+.SH ENVIRONMENT
+.TP 10
+.B ICU_DATA
+Specifies the directory containing ICU data. Defaults to
+.BR ${prefix}/share/icu/54.1/ .
+Some tools in ICU depend on the presence of the trailing slash. It is thus
+important to make sure that it is present if
+.B ICU_DATA
+is set.
+.SH FILES
+The following files are read by
+.B gensprep
+and are looked for in the
+.I source
+/misc for rfc3454_*.txt files and in 
+.I source
+/unidata for NormalizationCorrections.txt.
+.TP 20
+.B rfc3453_A_1.txt 
+Contains the list of unassigned codepoints in Unicode version 3.2.0.\|.\|.. 
+.TP
+.B rfc3454_B_1.txt
+Contains the list of code points that are commonly mapped to nothing.\|.\|..
+.TP
+.B rfc3454_B_2.txt
+Contains the list of mappings for casefolding of  code points when Normalization form NFKC is specified.\|.\|..
+.TP
+.B rfc3454_C_X.txt
+Contains the list of code points that are prohibited for IDNA.
+.TP
+.B NormalizationCorrections.txt
+Contains the list of code points whose normalization has changed since Unicode Version 3.2.0. 
+.SH VERSION
+54.1
+.SH COPYRIGHT
+Copyright (C) 2000-2002 IBM, Inc. and others.
+.SH SEE ALSO
+.BR pkgdata (8)

data/vendor/local/share/man/man8/icupkg.8

@@ -0,0 +1,204 @@
+.\" Hey, Emacs! This is -*-nroff-*- you know...
+.\"
+.\" icupkg.8: manual page for the icupkg utility
+.\"
+.\" Copyright (C) 2000-2006 IBM, Inc. and others.
+.\"
+.TH ICUPKG 8 "18 August 2006" "ICU MANPAGE" "ICU 54.1 Manual"
+.SH NAME
+.B icupkg
+\- extract or modify an ICU
+.B .dat
+archive
+.SH SYNOPSIS
+.B icupkg
+[
+.BR "\-h\fP, \fB\-?\fP, \fB\-\-help"
+]
+[
+.BR "\-tl\fP, \fB\-\-type" " l"
+|
+.BR "\-tb\fP, \fB\-\-type" " b"
+|
+.BR "\-te\fP, \fB\-\-type" " e"
+]
+[
+.BR "\-c\fP, \fB\-\-copyright"
+|
+.BI "\-C\fP, \fB\-\-comment" " comment"
+]
+[
+.BI "\-a\fP, \fB\-\-add" " list"
+]
+[
+.BI "\-r\fP, \fB\-\-remove" " list"
+]
+[
+.BI "\-x\fP, \fB\-\-extract" " list"
+]
+[
+.BI "\-l\fP, \fB\-\-list"
+]
+[
+.BI "\-s\fP, \fB\-\-sourcedir" " source"
+]
+[
+.BI "\-d\fP, \fB\-\-destdir" " destination"
+]
+[
+.BI "\-w\fP, \fB\-\-writepkg"
+]
+[
+.BI "\-m\fP, \fB\-\-matchmode" " mode"
+]
+.IR infilename
+[
+.BI "outfilename"
+]
+.SH DESCRIPTION
+.B icupkg
+reads the input ICU
+.B .dat
+package file, modify it according to the options,
+swap it to the desired platform properties (charset & endianness),
+and optionally write the resulting ICU
+.B .dat
+package to the output file.
+Items are removed, then added, then extracted and listed.
+An ICU
+.B .dat
+package is written if items are removed or added,
+or if the input and output filenames differ,
+or if the
+.BR "\-w\fP, \fB\-\-writepkg"
+option is set.
+.PP
+If the input filename is "new" then an empty package is created.
+If the output filename is missing, then it is automatically generated
+from the input filename. If the input filename ends with an l, b, or e
+matching its platform properties, then the output filename will
+contain the letter from the
+.BI "\-t\fP, \fB\-\-type"
+option.
+.PP
+This tool can also be used to just swap a single ICU data file, replacing the
+former icuswap tool. For this mode, provide the infilename (and optional
+outfilename) for a non-package ICU data file.
+Allowed options include
+.BI "\-t\fP, \fB\-w\fP, \fB\-s\fP"
+and
+.BI \-d
+.
+The filenames can be absolute, or relative to the source/dest dir paths.
+Other options are not allowed in this mode.
+.SH OPTIONS
+.TP
+.BR "\-h\fP, \fB\-?\fP, \fB\-\-help"
+Print help about usage and exit.
+.TP
+.BI "\-tl\fP, \fB\-\-type" " l"
+Output for little-endian/ASCII charset family.
+The output type defaults to the input type.
+.TP
+.BI "\-tb\fP, \fB\-\-type" " b"
+Output for big-endian/ASCII charset family.
+The output type defaults to the input type.
+.TP
+.BI "\-te\fP, \fB\-\-type" " e"
+Output for big-endian/EBCDIC charset family.
+The output type defaults to the input type.
+.TP
+.BR \-c\fP, \fB\-\-copyright
+Include the ICU copyright notice in the resulting data.
+.TP
+.BI "\-C\fP, \fB\-\-comment" " comment"
+Include the specified
+.I comment
+in the resulting data instead of the ICU copyright notice. 
+.TP
+.BI "\-a\fP, \fB\-\-add" " list"
+Add items from the
+.I list
+to the package. The list can be a single filename with a
+.B .txt
+file extension containing a list of item filenames, or an ICU
+.B .dat
+package filename.
+.TP
+.BI "\-r\fP, \fB\-\-remove" " list"
+Remove items from the
+.I list
+from the package. The list can be a single filename with a
+.B .txt
+file extension containing a list of item filenames, or an ICU
+.B .dat
+package filename.
+.TP
+.BI "\-x\fP, \fB\-\-extract" " list"
+Extract items from the
+.I list
+from the package. The list can be a single filename with a
+.B .txt
+file extension containing a list of item filenames, or an ICU
+.B .dat
+package filename.
+.TP
+.BI "\-m\fP, \fB\-\-matchmode" " mode"
+Set the matching mode for item names with wildcards.
+.TP
+.BI "\-s\fP, \fB\-\-sourcedir" " source"
+Set the source directory to
+.IR source .
+The default source directory is the current directory.
+.TP
+.BI "\-d\fP, \fB\-\-destdir" " destination"
+Set the destination directory to
+.IR destination .
+The default destination directory is the current directory.
+.TP
+.BI "\-l\fP, \fB\-\-list"
+List the package items to stdout (after modifying the package).
+.SH LIST FILE SYNTAX
+Items are listed on one or more lines and separated by whitespace (space+tab).
+Comments begin with
+.B #
+and are ignored. Empty lines are ignored. Lines where the first non-whitespace
+character is one of "%&'()*+,-./:;<=>?_ are also ignored
+to reserve for future syntax.
+.PP
+Items for removal or extraction may contain a single 
+.B *
+wildcard character. The 
+.B *
+matches zero or more characters. If
+.BI "\-m\fP, \fB\-\-matchmode" " noslash"
+is set, then the
+.B *
+character does not match the
+.B /
+character.
+.PP
+Items must be listed relative to the package, and the
+.B "\fB\-\-sourcedir"
+or the
+.B "\fB\-\-destdir"
+path will be prepended. The paths are only prepended to item
+filenames while adding or extracting items, not to ICU .dat package or list
+filenames.
+.PP
+Paths may contain
+.B /
+instead of the platform's file separator character and are converted as
+appropriate.
+.SH AUTHORS
+Markus Scherer
+.br
+George Rhoten
+.SH VERSION
+1.0
+.SH COPYRIGHT
+Copyright (C) 2006 IBM, Inc. and others.
+.SH SEE ALSO
+.BR pkgdata (1)
+.BR genrb (1)
+