pan_domain 0.1.0.rc1

data/spec/sample_app/spec/lib/tasks/human_domain_spec.rb

@@ -0,0 +1,89 @@
+require 'rails_helper'
+
+describe 'human_domain:generate:migrations' do
+  subject(:task) { Rake::Task['human_domain:generate:migrations'] }
+
+  # Suppress thor messages
+  before { allow($stdout).to receive(:write) }
+  after { task.reenable }
+
+  it 'is not raise any exception' do
+    expect { task.invoke }.not_to raise_exception
+  end
+
+  it 'runs "rails g humain_domain:generate:migrations"' do
+    expect_any_instance_of(Kernel).to(
+      receive(:system).with 'rails g human_domain:generate:migrations'
+    )
+
+    task.invoke
+  end
+end
+
+describe 'human_domain:db:seed' do
+  subject(:task) { Rake::Task['human_domain:db:seed'] }
+
+  before(:all) do
+    # Setup tables
+    Rake::Task['human_domain:generate:migrations'].invoke
+    Rake::Task['db:migrate'].invoke
+  end
+
+  # Suppress thor messages
+  before { allow($stdout).to receive(:write) }
+  after { task.reenable }
+
+  it 'is not raise any exception' do
+    expect { task.invoke }.not_to raise_exception
+  end
+
+  it 'runs "PanDomain::Human::Engine.load_seed"' do
+    expect(PanDomain::Human::Engine).to receive(:load_seed)
+
+    task.invoke
+  end
+
+  it 'creates 2 records in "blood_classification_systems" table' do
+    expect do
+      task.invoke
+    end.to change {
+      PanDomain::Human::BloodClassificationSystem.count
+    }.from(0).to(2)
+  end
+
+  it 'creates 6 records in "blood_group_names" table' do
+    expect do
+      task.invoke
+    end.to change { PanDomain::Human::BloodGroupName.count }.from(0).to(6)
+  end
+end
+
+describe 'human_domain:install' do
+  subject(:task) { Rake::Task['human_domain:install'] }
+
+  # Suppress thor messages
+  before { allow($stdout).to receive(:write) }
+  after { task.reenable }
+
+  it 'is not raise any exception' do
+    expect { task.invoke }.not_to raise_exception
+  end
+
+  it 'runs "rake human_domain:generate:migrations"' do
+    expect(Rake::Task['human_domain:generate:migrations']).to receive(:invoke)
+
+    task.invoke
+  end
+
+  it 'runs "rake db:migrate"' do
+    expect(Rake::Task['db:migrate']).to receive(:invoke)
+
+    task.invoke
+  end
+
+  it 'runs "rake human_domain:db:seed"' do
+    expect(Rake::Task['human_domain:db:seed']).to receive(:invoke)
+
+    task.invoke
+  end
+end

data/spec/sample_app/spec/lib/tasks/pan_domain_spec.rb

@@ -0,0 +1,38 @@
+require 'rails_helper'
+
+describe 'pan_domain:install' do
+  subject(:task) { Rake::Task['pan_domain:install'] }
+
+  # Suppress thor messages
+  before { allow($stdout).to receive(:write) }
+  after { task.reenable }
+
+  it 'is not raise any exception' do
+    expect { task.invoke }.not_to raise_exception
+  end
+
+  it 'runs "rake human_domain:install"' do
+    expect(Rake::Task['human_domain:install']).to receive(:invoke)
+
+    task.invoke
+  end
+end
+
+describe 'pan_domain:db:seed' do
+  subject(:task) { Rake::Task['pan_domain:db:seed'] }
+
+  # Suppress thor messages
+  before { allow($stdout).to receive(:write) }
+  after { task.reenable }
+
+  it 'is not raise any exception' do
+    expect { task.invoke }.not_to raise_exception
+  end
+
+  it 'runs "rake human_domain:db:seed"' do
+    expect(Rake::Task['human_domain:db:seed']).to receive(:invoke)
+
+    task.invoke
+  end
+end
+

data/spec/sample_app/spec/models/pan_domain/human/blood_classification_system_spec.rb

@@ -0,0 +1,46 @@
+require 'rails_helper'
+
+describe PanDomain::Human::BloodClassificationSystem do
+  before(:all) do
+    # Setup tables
+    Rake::Task['human_domain:generate:migrations'].execute
+    Rake::Task['db:migrate'].execute
+    Rake::Task['db:seed'].execute
+  end
+
+  it { is_expected.to validate_presence_of :name }
+  it { is_expected.to validate_presence_of :description }
+  it { is_expected.to have_many :blood_group_names }
+
+  context 'validations' do
+    subject(:blood_classification_system) do
+      PanDomain::Human::BloodClassificationSystem.new(
+        name: 'TEST', description: 'A description'
+      )
+    end
+
+    it { is_expected.to validate_uniqueness_of(:name).ignoring_case_sensitivity }
+  end
+
+  describe '.abo' do
+    before do
+      @abo = PanDomain::Human::BloodClassificationSystem.find_by(name: 'ABO')
+    end
+
+    it 'returns record correctly' do
+      expect(PanDomain::Human::BloodClassificationSystem.abo).to eq @abo
+    end
+  end
+
+  describe '.rhesus' do
+    before do
+      @rhesus = PanDomain::Human::BloodClassificationSystem.find_by(
+        name: 'Rhesus'
+      )
+    end
+
+    it 'returns record correctly' do
+      expect(PanDomain::Human::BloodClassificationSystem.rhesus).to eq @rhesus
+    end
+  end
+end

data/spec/sample_app/spec/models/pan_domain/human/blood_group_name_spec.rb

@@ -0,0 +1,39 @@
+require 'rails_helper'
+
+describe PanDomain::Human::BloodGroupName do
+  before(:all) do
+    # Setup tables
+    Rake::Task['human_domain:generate:migrations'].execute
+    Rake::Task['db:migrate'].execute
+    Rake::Task['db:seed'].execute
+  end
+
+  it { is_expected.to validate_presence_of :name }
+  it { is_expected.to validate_presence_of :symbol }
+  it { is_expected.to belong_to :blood_classification_system }
+
+  context 'validations' do
+    subject(:blood_group_name) do
+      PanDomain::Human::BloodGroupName.new(
+        blood_classification_system: PanDomain::Human::BloodClassificationSystem.first,
+        name: 'TEST', symbol: 'A_SYMBOL'
+      )
+    end
+
+    it do
+      is_expected.to(
+        validate_uniqueness_of(:name).scoped_to(
+          :blood_classification_system_id
+        ).ignoring_case_sensitivity
+      )
+    end
+
+    it do
+      is_expected.to(
+        validate_uniqueness_of(:symbol).scoped_to(
+          :blood_classification_system_id
+        ).ignoring_case_sensitivity
+      )
+    end
+  end
+end

data/spec/sample_app/spec/rails_helper.rb

@@ -0,0 +1,98 @@
+require 'spec_helper'
+ENV['RAILS_ENV'] ||= 'test'
+require File.expand_path('../config/environment', __dir__)
+# Prevent database truncation if the environment is production
+abort("The Rails environment is running in production mode!") if Rails.env.production?
+
+require 'rspec/rails'
+require 'shoulda-matchers'
+# Add additional requires below this line. Rails is not loaded until this point!
+
+# Requires supporting ruby files with custom matchers and macros, etc, in
+# spec/support/ and its subdirectories. Files matching `spec/**/*_spec.rb` are
+# run as spec files by default. This means that files in spec/support that end
+# in _spec.rb will both be required and run as specs, causing the specs to be
+# run twice. It is recommended that you do not name files matching this glob to
+# end with _spec.rb. You can configure this pattern with the --pattern
+# option on the command line or in ~/.rspec, .rspec or `.rspec-local`.
+#
+# The following line is provided for convenience purposes. It has the downside
+# of increasing the boot-up time by auto-requiring all files in the support
+# directory. Alternatively, in the individual `*_spec.rb` files, manually
+# require only the support files necessary.
+#
+# Dir[Rails.root.join('spec', 'support', '**', '*.rb')].each { |f| require f }
+
+# Checks for pending migrations and applies them before tests are run.
+# If you are not using ActiveRecord, you can remove these lines.
+begin
+  ActiveRecord::Migration.maintain_test_schema!
+rescue ActiveRecord::PendingMigrationError => e
+  puts e.to_s.strip
+  exit 1
+end
+
+Shoulda::Matchers.configure do |config|
+  config.integrate do |with|
+    with.test_framework :rspec
+    with.library :rails
+  end
+end
+
+RSpec.configure do |config|
+  # Remove this line if you're not using ActiveRecord or ActiveRecord fixtures
+  config.fixture_path = "#{::Rails.root}/spec/fixtures"
+
+  # If you're not using ActiveRecord, or you'd prefer not to run each of your
+  # examples within a transaction, remove the following line or assign false
+  # instead of true.
+  config.use_transactional_fixtures = true
+
+  # RSpec Rails can automatically mix in different behaviours to your tests
+  # based on their file location, for example enabling you to call `get` and
+  # `post` in specs under `spec/controllers`.
+  #
+  # You can disable this behaviour by removing the line below, and instead
+  # explicitly tag your specs with their type, e.g.:
+  #
+  #     RSpec.describe UsersController, :type => :controller do
+  #       # ...
+  #     end
+  #
+  # The different available types are documented in the features, such as in
+  # https://relishapp.com/rspec/rspec-rails/docs
+  config.infer_spec_type_from_file_location!
+
+  # config.define_derived_metadata(:file_path => %r{/spec/tasks/}) do |metadata|
+  #   metadata[:type] = :task
+  # end
+
+  config.before(:suite) do
+    Rails.application.load_tasks
+
+    # Setup database
+    ActiveRecord::Migration.verbose = false
+
+    Rake::Task['db:drop'].execute
+    Rake::Task['db:create'].execute
+    Rake::Task['db:schema:dump'].execute
+  end
+
+  config.after(:all) do
+    # Reset database
+    Rake::Task['db:drop:_unsafe'].reenable
+    Rake::Task['db:drop'].execute
+    Rake::Task['db:create'].execute
+    Rake::Task['db:schema:dump'].execute
+
+    # Remove migration files
+    Dir.glob("#{__dir__}/../db/migrate/*.rb").each do |file_path|
+      File.delete(file_path) if File.exist?(file_path)
+    end
+  end
+
+  # Filter lines from Rails gems in backtraces.
+  config.filter_rails_from_backtrace!
+  # arbitrary gems may also be filtered via:
+  # config.filter_gems_from_backtrace("gem name")
+end

data/spec/sample_app/spec/spec_helper.rb

@@ -0,0 +1,96 @@
+# This file was generated by the `rails generate rspec:install` command. Conventionally, all
+# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
+# The generated `.rspec` file contains `--require spec_helper` which will cause
+# this file to always be loaded, without a need to explicitly require it in any
+# files.
+#
+# Given that it is always loaded, you are encouraged to keep this file as
+# light-weight as possible. Requiring heavyweight dependencies from this file
+# will add to the boot time of your test suite on EVERY test run, even for an
+# individual file that may not need all of that loaded. Instead, consider making
+# a separate helper file that requires the additional dependencies and performs
+# the additional setup, and require it from the spec files that actually need
+# it.
+#
+# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
+RSpec.configure do |config|
+  # rspec-expectations config goes here. You can use an alternate
+  # assertion/expectation library such as wrong or the stdlib/minitest
+  # assertions if you prefer.
+  config.expect_with :rspec do |expectations|
+    # This option will default to `true` in RSpec 4. It makes the `description`
+    # and `failure_message` of custom matchers include text for helper methods
+    # defined using `chain`, e.g.:
+    #     be_bigger_than(2).and_smaller_than(4).description
+    #     # => "be bigger than 2 and smaller than 4"
+    # ...rather than:
+    #     # => "be bigger than 2"
+    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
+  end
+
+  # rspec-mocks config goes here. You can use an alternate test double
+  # library (such as bogus or mocha) by changing the `mock_with` option here.
+  config.mock_with :rspec do |mocks|
+    # Prevents you from mocking or stubbing a method that does not exist on
+    # a real object. This is generally recommended, and will default to
+    # `true` in RSpec 4.
+    mocks.verify_partial_doubles = true
+  end
+
+  # This option will default to `:apply_to_host_groups` in RSpec 4 (and will
+  # have no way to turn it off -- the option exists only for backwards
+  # compatibility in RSpec 3). It causes shared context metadata to be
+  # inherited by the metadata hash of host groups and examples, rather than
+  # triggering implicit auto-inclusion in groups with matching metadata.
+  config.shared_context_metadata_behavior = :apply_to_host_groups
+
+# The settings below are suggested to provide a good initial experience
+# with RSpec, but feel free to customize to your heart's content.
+=begin
+  # This allows you to limit a spec run to individual examples or groups
+  # you care about by tagging them with `:focus` metadata. When nothing
+  # is tagged with `:focus`, all examples get run. RSpec also provides
+  # aliases for `it`, `describe`, and `context` that include `:focus`
+  # metadata: `fit`, `fdescribe` and `fcontext`, respectively.
+  config.filter_run_when_matching :focus
+
+  # Allows RSpec to persist some state between runs in order to support
+  # the `--only-failures` and `--next-failure` CLI options. We recommend
+  # you configure your source control system to ignore this file.
+  config.example_status_persistence_file_path = "spec/examples.txt"
+
+  # Limits the available syntax to the non-monkey patched syntax that is
+  # recommended. For more details, see:
+  #   - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
+  #   - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
+  #   - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
+  config.disable_monkey_patching!
+
+  # Many RSpec users commonly either run the entire suite or an individual
+  # file, and it's useful to allow more verbose output when running an
+  # individual spec file.
+  if config.files_to_run.one?
+    # Use the documentation formatter for detailed output,
+    # unless a formatter has already been configured
+    # (e.g. via a command-line flag).
+    config.default_formatter = "doc"
+  end
+
+  # Print the 10 slowest examples and example groups at the
+  # end of the spec run, to help surface which specs are running
+  # particularly slow.
+  config.profile_examples = 10
+
+  # Run specs in random order to surface order dependencies. If you find an
+  # order dependency and want to debug it, you can fix the order by providing
+  # the seed, which is printed after each run.
+  #     --seed 1234
+  config.order = :random
+
+  # Seed global randomization in this process using the `--seed` CLI option.
+  # Setting this allows you to use `--seed` to deterministically reproduce
+  # test failures related to randomization by passing the same `--seed` value
+  # as the one that triggered the failure.
+  Kernel.srand config.seed
+=end
+end

data/spec/spec_helper.rb

@@ -0,0 +1,97 @@
+# This file was generated by the `rails generate rspec:install` command. Conventionally, all
+# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
+# The generated `.rspec` file contains `--require spec_helper` which will cause
+# this file to always be loaded, without a need to explicitly require it in any
+# files.
+#
+# Given that it is always loaded, you are encouraged to keep this file as
+# light-weight as possible. Requiring heavyweight dependencies from this file
+# will add to the boot time of your test suite on EVERY test run, even for an
+# individual file that may not need all of that loaded. Instead, consider making
+# a separate helper file that requires the additional dependencies and performs
+# the additional setup, and require it from the spec files that actually need
+# it.
+#
+# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
+
+RSpec.configure do |config|
+  # rspec-expectations config goes here. You can use an alternate
+  # assertion/expectation library such as wrong or the stdlib/minitest
+  # assertions if you prefer.
+  config.expect_with :rspec do |expectations|
+    # This option will default to `true` in RSpec 4. It makes the `description`
+    # and `failure_message` of custom matchers include text for helper methods
+    # defined using `chain`, e.g.:
+    #     be_bigger_than(2).and_smaller_than(4).description
+    #     # => "be bigger than 2 and smaller than 4"
+    # ...rather than:
+    #     # => "be bigger than 2"
+    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
+  end
+
+  # rspec-mocks config goes here. You can use an alternate test double
+  # library (such as bogus or mocha) by changing the `mock_with` option here.
+  config.mock_with :rspec do |mocks|
+    # Prevents you from mocking or stubbing a method that does not exist on
+    # a real object. This is generally recommended, and will default to
+    # `true` in RSpec 4.
+    mocks.verify_partial_doubles = true
+  end
+
+  # This option will default to `:apply_to_host_groups` in RSpec 4 (and will
+  # have no way to turn it off -- the option exists only for backwards
+  # compatibility in RSpec 3). It causes shared context metadata to be
+  # inherited by the metadata hash of host groups and examples, rather than
+  # triggering implicit auto-inclusion in groups with matching metadata.
+  config.shared_context_metadata_behavior = :apply_to_host_groups
+
+# The settings below are suggested to provide a good initial experience
+# with RSpec, but feel free to customize to your heart's content.
+=begin
+  # This allows you to limit a spec run to individual examples or groups
+  # you care about by tagging them with `:focus` metadata. When nothing
+  # is tagged with `:focus`, all examples get run. RSpec also provides
+  # aliases for `it`, `describe`, and `context` that include `:focus`
+  # metadata: `fit`, `fdescribe` and `fcontext`, respectively.
+  config.filter_run_when_matching :focus
+
+  # Allows RSpec to persist some state between runs in order to support
+  # the `--only-failures` and `--next-failure` CLI options. We recommend
+  # you configure your source control system to ignore this file.
+  config.example_status_persistence_file_path = "spec/examples.txt"
+
+  # Limits the available syntax to the non-monkey patched syntax that is
+  # recommended. For more details, see:
+  #   - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
+  #   - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
+  #   - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
+  config.disable_monkey_patching!
+
+  # Many RSpec users commonly either run the entire suite or an individual
+  # file, and it's useful to allow more verbose output when running an
+  # individual spec file.
+  if config.files_to_run.one?
+    # Use the documentation formatter for detailed output,
+    # unless a formatter has already been configured
+    # (e.g. via a command-line flag).
+    config.default_formatter = "doc"
+  end
+
+  # Print the 10 slowest examples and example groups at the
+  # end of the spec run, to help surface which specs are running
+  # particularly slow.
+  config.profile_examples = 10
+
+  # Run specs in random order to surface order dependencies. If you find an
+  # order dependency and want to debug it, you can fix the order by providing
+  # the seed, which is printed after each run.
+  #     --seed 1234
+  config.order = :random
+
+  # Seed global randomization in this process using the `--seed` CLI option.
+  # Setting this allows you to use `--seed` to deterministically reproduce
+  # test failures related to randomization by passing the same `--seed` value
+  # as the one that triggered the failure.
+  Kernel.srand config.seed
+=end
+end