openstudio-standards 0.6.3 → 0.7.0.rc1

data/lib/openstudio-standards/service_water_heating/create_water_heating_loop.rb

@@ -0,0 +1,303 @@
+module OpenstudioStandards
+  # The ServiceWaterHeating module provides methods to create, modify, and get information about service water heating
+  module ServiceWaterHeating
+    # @!group Create Loop
+    # Methods to add service water heating loops
+
+    # Creates a service water heating loop.
+    #
+    # @param model [OpenStudio::Model::Model] OpenStudio model object
+    # @param system_name [String] the name of the system. nil results in the default.
+    # @param service_water_temperature [Double] water heater temperature, in degrees C. Default is 60 C / 140 F.
+    # @param service_water_pump_head [Double] service water pump head, in Pa. Default is 29861 Pa / 10 ft.
+    # @param service_water_pump_motor_efficiency [Double] service water pump motor efficiency, as decimal.
+    # @param water_heater_capacity [Double] water heater capacity, in W. Defaults to 58.6 kW / 200 kBtu/hr
+    # @param water_heater_volume [Double] water heater volume, in m^3. Defaults to 0.378 m^3 / 100 gal
+    # @param water_heater_fuel [String] water heating fuel. Valid choices are 'NaturalGas', 'Electricity', 'FuelOilNo2', 'SimpleHeatPump', 'HeatPump', or 'None'.
+    #   If 'None', no water heater will be added.
+    # @param on_cycle_parasitic_fuel_consumption_rate [Double] water heater on cycle parasitic fuel consumption rate, in W
+    # @param off_cycle_parasitic_fuel_consumption_rate [Double] water heater off cycle parasitic fuel consumption rate, in W
+    # @param water_heater_thermal_zone [OpenStudio::Model::ThermalZone] Thermal zone for ambient heat loss.
+    #   If nil, will assume 71.6 F / 22 C ambient air temperature.
+    # @param number_of_water_heaters [Integer] the number of water heaters represented by the capacity and volume inputs.
+    #   Used to modify efficiencies for water heaters based on individual component size while avoiding having to model lots of individual water heaters (for runtime sake).
+    # @param add_piping_losses [Boolean] if true, add piping and associated heat losses to system.  If false, add no pipe heat losses.
+    # @param pipe_insulation_thickness [Double] the thickness of the pipe insulation, in m. Default is 0.0127 m / 0.5 inches.
+    # @param floor_area [Double] the area of building served by the service water heating loop, in m^2
+    #   If nil, will use the total building floor area. Only used if piping losses is true and the system is circulating.
+    # @param number_of_stories [Integer] the number of stories served by the service water heating loop
+    #   If nil, will use the total building number of stories. Only used if piping losses is true and the system is circulating.
+    # @return [OpenStudio::Model::PlantLoop] OpenStudio PlantLoop object of the service water loop
+    def self.create_service_water_heating_loop(model,
+                                               system_name: 'Service Water Loop',
+                                               service_water_temperature: 60.0,
+                                               service_water_pump_head: 29861.0,
+                                               service_water_pump_motor_efficiency: 0.3,
+                                               water_heater_capacity: nil,
+                                               water_heater_volume: nil,
+                                               water_heater_fuel: 'Electricity',
+                                               on_cycle_parasitic_fuel_consumption_rate: 0.0,
+                                               off_cycle_parasitic_fuel_consumption_rate: 0.0,
+                                               water_heater_thermal_zone: nil,
+                                               number_of_water_heaters: 1,
+                                               add_piping_losses: false,
+                                               pipe_insulation_thickness: 0.0127,
+                                               floor_area: nil,
+                                               number_of_stories: nil)
+
+      # create service water heating loop
+      service_water_loop = OpenStudio::Model::PlantLoop.new(model)
+      service_water_loop.setMinimumLoopTemperature(10.0)
+      if service_water_temperature > 60.0
+        service_water_loop.setMaximumLoopTemperature(service_water_temperature)
+      else
+        service_water_loop.setMaximumLoopTemperature(60.0)
+      end
+
+      if system_name.nil?
+        system_name = 'Service Water Loop'
+      end
+      service_water_loop.setName(system_name)
+
+      # service water heating loop controls
+      swh_temp_f = OpenStudio.convert(service_water_temperature, 'C', 'F').get
+      swh_delta_t_r = 9.0 # 9F delta-T
+      swh_delta_t_k = OpenStudio.convert(swh_delta_t_r, 'R', 'K').get
+      swh_temp_sch = OpenstudioStandards::Schedules.create_constant_schedule_ruleset(model,
+                                                                                     service_water_temperature,
+                                                                                     name: "Service Water Loop Temp - #{swh_temp_f.round}F",
+                                                                                     schedule_type_limit: 'Temperature')
+      swh_stpt_manager = OpenStudio::Model::SetpointManagerScheduled.new(model, swh_temp_sch)
+      swh_stpt_manager.setName('Service hot water setpoint manager')
+      swh_stpt_manager.addToNode(service_water_loop.supplyOutletNode)
+      sizing_plant = service_water_loop.sizingPlant
+      sizing_plant.setLoopType('Heating')
+      sizing_plant.setDesignLoopExitTemperature(service_water_temperature)
+      sizing_plant.setLoopDesignTemperatureDifference(swh_delta_t_k)
+
+      # determine if circulating or non-circulating based on supplied head pressure
+      if service_water_pump_head.nil? || service_water_pump_head <= 1
+        # set pump head pressure to near zero if there is no circulation pump
+        service_water_pump_head = 0.001
+        service_water_pump_motor_efficiency = 1
+        circulating = false
+      else
+        circulating = true
+      end
+
+      # add pump
+      if circulating
+        swh_pump = OpenStudio::Model::PumpConstantSpeed.new(model)
+        swh_pump.setName("#{service_water_loop.name} Circulator Pump")
+        swh_pump.setPumpControlType('Intermittent')
+      else
+        swh_pump = OpenStudio::Model::PumpVariableSpeed.new(model)
+        swh_pump.setName("#{service_water_loop.name} Water Mains Pressure Driven")
+        swh_pump.setPumpControlType('Continuous')
+      end
+      swh_pump.setRatedPumpHead(service_water_pump_head.to_f)
+      swh_pump.setMotorEfficiency(service_water_pump_motor_efficiency)
+      swh_pump.addToNode(service_water_loop.supplyInletNode)
+
+      # add water heater
+      case water_heater_fuel
+      when 'None'
+        # don't add a water heater
+      when 'HeatPump'
+        OpenstudioStandards::ServiceWaterHeating.create_heatpump_water_heater(model,
+                                                                              water_heater_capacity: water_heater_capacity,
+                                                                              water_heater_volume: water_heater_volume,
+                                                                              on_cycle_parasitic_fuel_consumption_rate: on_cycle_parasitic_fuel_consumption_rate,
+                                                                              off_cycle_parasitic_fuel_consumption_rate: off_cycle_parasitic_fuel_consumption_rate,
+                                                                              service_water_temperature: service_water_temperature,
+                                                                              service_water_temperature_schedule: swh_temp_sch,
+                                                                              set_peak_use_flowrate: false,
+                                                                              peak_flowrate: 0.0,
+                                                                              flowrate_schedule: nil,
+                                                                              water_heater_thermal_zone: water_heater_thermal_zone,
+                                                                              service_water_loop: service_water_loop,
+                                                                              use_ems_control: false)
+      else
+        OpenstudioStandards::ServiceWaterHeating.create_water_heater(model,
+                                                                      water_heater_capacity: water_heater_capacity,
+                                                                      water_heater_volume: water_heater_volume,
+                                                                      water_heater_fuel: water_heater_fuel,
+                                                                      on_cycle_parasitic_fuel_consumption_rate: on_cycle_parasitic_fuel_consumption_rate,
+                                                                      off_cycle_parasitic_fuel_consumption_rate: off_cycle_parasitic_fuel_consumption_rate,
+                                                                      service_water_temperature: service_water_temperature,
+                                                                      service_water_temperature_schedule: swh_temp_sch,
+                                                                      set_peak_use_flowrate: false,
+                                                                      peak_flowrate: 0.0,
+                                                                      flowrate_schedule: nil,
+                                                                      water_heater_thermal_zone: water_heater_thermal_zone,
+                                                                      number_of_water_heaters: number_of_water_heaters,
+                                                                      service_water_loop: service_water_loop)
+      end
+
+      # add pipe losses if requested
+      if add_piping_losses
+        OpenstudioStandards::ServiceWaterHeating.create_service_water_heating_piping_losses(model,
+                                                                                            service_water_loop,
+                                                                                            circulating: circulating,
+                                                                                            pipe_insulation_thickness: pipe_insulation_thickness,
+                                                                                            floor_area: floor_area,
+                                                                                            number_of_stories: number_of_stories)
+      end
+
+      # service water heating loop bypass pipes
+      water_heater_bypass_pipe = OpenStudio::Model::PipeAdiabatic.new(model)
+      service_water_loop.addSupplyBranchForComponent(water_heater_bypass_pipe)
+      coil_bypass_pipe = OpenStudio::Model::PipeAdiabatic.new(model)
+      service_water_loop.addDemandBranchForComponent(coil_bypass_pipe)
+      supply_outlet_pipe = OpenStudio::Model::PipeAdiabatic.new(model)
+      supply_outlet_pipe.addToNode(service_water_loop.supplyOutletNode)
+      demand_outlet_pipe = OpenStudio::Model::PipeAdiabatic.new(model)
+      demand_outlet_pipe.addToNode(service_water_loop.demandOutletNode)
+
+      if circulating
+        OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.ServiceWaterHeating', "Added circulating SWH loop called #{service_water_loop.name}")
+      else
+        OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.ServiceWaterHeating', "Added non-circulating SWH loop called #{service_water_loop.name}")
+      end
+
+      return service_water_loop
+    end
+
+    # Creates a booster water heater on its own loop and attaches it to the main service water heating loop.
+    #
+    # @param model [OpenStudio::Model::Model] OpenStudio model object
+    # @param water_heater_capacity [Double] water heater capacity, in W. Defaults to 8 kW / 27.283 kBtu/hr
+    # @param water_heater_volume [Double] water heater volume, in m^3. Defaults to 0.0227 m^3 / 6 gal
+    # @param water_heater_fuel [String] water heating fuel. Valid choices are 'NaturalGas', 'Electricity'.
+    # @param on_cycle_parasitic_fuel_consumption_rate [Double] water heater on cycle parasitic fuel consumption rate, in W
+    # @param off_cycle_parasitic_fuel_consumption_rate [Double] water heater off cycle parasitic fuel consumption rate, in W
+    # @param service_water_temperature [Double] water heater temperature, in degrees C. Default is 82.2 C / 180 F.
+    # @param service_water_temperature_schedule [OpenStudio::Model::Schedule] the service water heating schedule.
+    #   If nil, will be defaulted to a constant temperature schedule based on the service_water_temperature
+    # @param water_heater_thermal_zone [OpenStudio::Model::ThermalZone] Thermal zone for ambient heat loss.
+    #   If nil, will assume 71.6 F / 22 C ambient air temperature.
+    # @param service_water_loop [OpenStudio::Model::PlantLoop] if provided, add the water heater to this loop
+    # @return [OpenStudio::Model::PlantLoop] The booster water loop OpenStudio PlantLoop object
+    def self.create_booster_water_heating_loop(model,
+                                               water_heater_capacity: 8000.0,
+                                               water_heater_volume: OpenStudio.convert(6.0, 'gal', 'm^3').get,
+                                               water_heater_fuel: 'Electricity',
+                                               on_cycle_parasitic_fuel_consumption_rate: 0.0,
+                                               off_cycle_parasitic_fuel_consumption_rate: 0.0,
+                                               service_water_temperature: 82.2,
+                                               service_water_temperature_schedule: nil,
+                                               water_heater_thermal_zone: nil,
+                                               service_water_loop: nil)
+      if service_water_loop.nil?
+        OpenStudio.logFree(OpenStudio::Error, 'openstudio.standards.ServiceWaterHeating', "#{_method_} requires the service_water_loop argument to couple the booster water heating loop with a heat exchanger.")
+        return nil
+      else
+        OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.ServiceWaterHeating', "Adding booster water heater to #{service_water_loop.name}")
+      end
+
+      water_heater_volume_gal = OpenStudio.convert(water_heater_volume, 'm^3', 'gal').get
+      water_heater_capacity_kbtu_per_hr = OpenStudio.convert(water_heater_capacity, 'W', 'kBtu/hr').get
+
+      # Booster water heating loop
+      booster_service_water_loop = OpenStudio::Model::PlantLoop.new(model)
+      booster_service_water_loop.setName('Booster Service Water Loop')
+
+      # create and add booster water heater to loop
+      booster_water_heater = OpenstudioStandards::ServiceWaterHeating.create_water_heater(model,
+                                                                                          water_heater_capacity: water_heater_capacity,
+                                                                                          water_heater_volume: water_heater_volume,
+                                                                                          water_heater_fuel: water_heater_fuel,
+                                                                                          on_cycle_parasitic_fuel_consumption_rate: on_cycle_parasitic_fuel_consumption_rate,
+                                                                                          off_cycle_parasitic_fuel_consumption_rate: off_cycle_parasitic_fuel_consumption_rate,
+                                                                                          service_water_temperature: service_water_temperature,
+                                                                                          service_water_temperature_schedule: service_water_temperature_schedule,
+                                                                                          water_heater_thermal_zone: water_heater_thermal_zone,
+                                                                                          service_water_loop: booster_service_water_loop)
+      booster_water_heater.setName("#{water_heater_volume_gal}gal #{water_heater_fuel} Booster Water Heater - #{water_heater_capacity_kbtu_per_hr.round}kBtu/hr")
+      booster_water_heater.setEndUseSubcategory('Booster')
+
+      # Service water heating loop controls
+      swh_temp_f = OpenStudio.convert(service_water_temperature, 'C', 'F').get
+      swh_delta_t_r = 9.0 # 9F delta-T
+      swh_delta_t_k = OpenStudio.convert(swh_delta_t_r, 'R', 'K').get
+      swh_temp_sch = OpenstudioStandards::Schedules.create_constant_schedule_ruleset(model,
+                                                                                     service_water_temperature,
+                                                                                     name: "Service Water Booster Temp - #{swh_temp_f.round}F",
+                                                                                     schedule_type_limit: 'Temperature')
+      swh_stpt_manager = OpenStudio::Model::SetpointManagerScheduled.new(model, swh_temp_sch)
+      swh_stpt_manager.setName('Hot water booster setpoint manager')
+      swh_stpt_manager.addToNode(booster_service_water_loop.supplyOutletNode)
+      sizing_plant = booster_service_water_loop.sizingPlant
+      sizing_plant.setLoopType('Heating')
+      sizing_plant.setDesignLoopExitTemperature(service_water_temperature)
+      sizing_plant.setLoopDesignTemperatureDifference(swh_delta_t_k)
+
+      # Booster water heating pump
+      swh_pump = OpenStudio::Model::PumpVariableSpeed.new(model)
+      swh_pump.setName('Booster Water Loop Pump')
+      swh_pump.setRatedPumpHead(0.0) # As if there is no circulation pump
+      swh_pump.setRatedPowerConsumption(0.0) # As if there is no circulation pump
+      swh_pump.setMotorEfficiency(1)
+      swh_pump.setPumpControlType('Continuous')
+      swh_pump.setMinimumFlowRate(0.0)
+      swh_pump.addToNode(booster_service_water_loop.supplyInletNode)
+
+      # Service water heating loop bypass pipes
+      water_heater_bypass_pipe = OpenStudio::Model::PipeAdiabatic.new(model)
+      booster_service_water_loop.addSupplyBranchForComponent(water_heater_bypass_pipe)
+      coil_bypass_pipe = OpenStudio::Model::PipeAdiabatic.new(model)
+      booster_service_water_loop.addDemandBranchForComponent(coil_bypass_pipe)
+      supply_outlet_pipe = OpenStudio::Model::PipeAdiabatic.new(model)
+      supply_outlet_pipe.addToNode(booster_service_water_loop.supplyOutletNode)
+      demand_inlet_pipe = OpenStudio::Model::PipeAdiabatic.new(model)
+      demand_inlet_pipe.addToNode(booster_service_water_loop.demandInletNode)
+      demand_outlet_pipe = OpenStudio::Model::PipeAdiabatic.new(model)
+      demand_outlet_pipe.addToNode(booster_service_water_loop.demandOutletNode)
+
+      # Heat exchanger to supply the booster water heater with normal hot water from the main service water loop
+      hx = OpenStudio::Model::HeatExchangerFluidToFluid.new(model)
+      hx.setName('Booster Water Heating Heat Exchanger')
+      hx.setHeatExchangeModelType('Ideal')
+      hx.setControlType('UncontrolledOn')
+      hx.setHeatTransferMeteringEndUseType('LoopToLoop')
+
+      # Add the HX to the supply side of the booster loop
+      hx.addToNode(booster_service_water_loop.supplyInletNode)
+
+      # Add the HX to the demand side of the main service water loop
+      service_water_loop.addDemandBranchForComponent(hx)
+
+      # Add a plant component temperature source to the demand outlet
+      # of the HX to represent the fact that the water used by the booster
+      # would in reality be at the mains temperature.
+      mains_src = OpenStudio::Model::PlantComponentTemperatureSource.new(model)
+      mains_src.setName('Mains Water Makeup for SWH Booster')
+      mains_src.addToNode(hx.demandOutletModelObject.get.to_Node.get)
+
+      # use the site water mains temperature schedule if available,
+      # otherwise use the annual average outdoor air temperature
+      site_water_mains = model.getSiteWaterMainsTemperature
+      if site_water_mains.temperatureSchedule.is_initialized
+        water_mains_temp_sch = site_water_mains.temperatureSchedule.get
+      elsif site_water_mains.annualAverageOutdoorAirTemperature.is_initialized
+        mains_src_temp_c = site_water_mains.annualAverageOutdoorAirTemperature.get
+        mains_src.setSourceTemperature(mains_src_temp_c)
+        water_mains_temp_sch = OpenStudio::Model::ScheduleConstant.new(model)
+        water_mains_temp_sch.setName('Booster Water Makeup Temperature')
+        water_mains_temp_sch.setValue(mains_src_temp_c)
+      else # assume 50F
+        mains_src_temp_c = OpenStudio.convert(50.0, 'F', 'C').get
+        mains_src.setSourceTemperature(mains_src_temp_c)
+        water_mains_temp_sch = OpenStudio::Model::ScheduleConstant.new(model)
+        water_mains_temp_sch.setName('Booster Water Makeup Temperature')
+        water_mains_temp_sch.setValue(mains_src_temp_c)
+      end
+      mains_src.setTemperatureSpecificationType('Scheduled')
+      mains_src.setSourceTemperatureSchedule(water_mains_temp_sch)
+
+      return booster_service_water_loop
+    end
+
+    # @!endgroup Create Loop
+  end
+end

data/lib/openstudio-standards/service_water_heating/create_water_use.rb

@@ -0,0 +1,95 @@
+module OpenstudioStandards
+  # The ServiceWaterHeating module provides methods to create, modify, and get information about service water heating
+  module ServiceWaterHeating
+    # @!group Create Water Use
+    # Methods to add service water uses
+
+    # Creates a water use and attaches it to a service water loop and a space, if provided
+    #
+    # @param model [OpenStudio::Model::Model] OpenStudio model object
+    # @param name [String] Use name of the water use object, e.g. main or laundry
+    # @param flow_rate [Double] the peak flow rate of the water use in m^3/s
+    # @param flow_rate_fraction_schedule [OpenStudio::Model::Schedule] the flow rate fraction schedule
+    # @param water_use_temperature [Double] mixed water use temperature at the fixture, in degrees C. Default is 43.3 C / 110 F.
+    # @param water_use_temperature_schedule [OpenStudio::Model::Schedule] water use temperature schedule.
+    #   If nil, will be defaulted to a constant temperature schedule based on the water_use_temperature
+    # @param sensible_fraction [Double] the water use equipment sensible fraction to the space
+    # @param latent_fraction [Double] the water use equipment latent fraction to the space
+    # @param service_water_loop [OpenStudio::Model::PlantLoop] if provided, add the water use fixture to this loop
+    # @param space [OpenStudio::Model::Space] OpenStudio Space object
+    # @return [OpenStudio::Model::WaterUseEquipment] OpenStudio WaterUseEquipment object
+    def self.create_water_use(model,
+                              name: 'Main Water Use',
+                              flow_rate: 0.0,
+                              flow_rate_fraction_schedule: nil,
+                              water_use_temperature: 43.3,
+                              water_use_temperature_schedule: nil,
+                              sensible_fraction: 0.2,
+                              latent_fraction: 0.05,
+                              service_water_loop: nil,
+                              space: nil)
+      # IP conversions for naming
+      flow_rate_gpm = OpenStudio.convert(flow_rate, 'm^3/s', 'gal/min').get
+      water_use_temperature_f = OpenStudio.convert(water_use_temperature, 'C', 'F').get
+
+      # default name
+      name = 'Main Water Use' if name.nil?
+
+      # water use definition
+      water_use_def = OpenStudio::Model::WaterUseEquipmentDefinition.new(model)
+
+      # set sensible and latent fractions
+      water_use_sensible_frac_sch = OpenstudioStandards::Schedules.create_constant_schedule_ruleset(model,
+                                                                                                    sensible_fraction,
+                                                                                                    name: "Fraction Sensible - #{sensible_fraction}",
+                                                                                                    schedule_type_limit: 'Fractional')
+      water_use_latent_frac_sch = OpenstudioStandards::Schedules.create_constant_schedule_ruleset(model,
+                                                                                                  latent_fraction,
+                                                                                                  name: "Fraction Latent - #{latent_fraction}",
+                                                                                                  schedule_type_limit: 'Fractional')
+      water_use_def.setSensibleFractionSchedule(water_use_sensible_frac_sch)
+      water_use_def.setLatentFractionSchedule(water_use_latent_frac_sch)
+      water_use_def.setPeakFlowRate(flow_rate)
+      water_use_def.setName("#{name} #{flow_rate_gpm.round(2)}gpm #{water_use_temperature_f.round}F")
+
+      # target mixed water temperature
+      if water_use_temperature_schedule.nil?
+        water_use_temperature_schedule = OpenstudioStandards::Schedules.create_constant_schedule_ruleset(model,
+                                                                                                         water_use_temperature,
+                                                                                                         name: "Mixed Water At Faucet Temp - #{water_use_temperature_f.round}F",
+                                                                                                         schedule_type_limit: 'Temperature')
+      end
+      water_use_def.setTargetTemperatureSchedule(water_use_temperature_schedule)
+
+      # create water use equipment
+      water_fixture = OpenStudio::Model::WaterUseEquipment.new(water_use_def)
+      water_fixture.setFlowRateFractionSchedule(flow_rate_fraction_schedule)
+
+      # create water use connection
+      swh_connection = OpenStudio::Model::WaterUseConnections.new(model)
+      swh_connection.addWaterUseEquipment(water_fixture)
+
+      # add to the space if provided
+      if space.nil?
+        water_fixture.setName("#{name} Service Water Use #{flow_rate_gpm.round(2)}gpm #{water_use_temperature_f.round}F")
+        swh_connection.setName("#{name} WUC #{flow_rate_gpm.round(2)}gpm #{water_use_temperature_f.round}F")
+      else
+        water_fixture.setName("#{space.name} Service Water Use #{flow_rate_gpm.round(2)}gpm #{water_use_temperature_f.round}F")
+        swh_connection.setName("#{space.name} WUC #{flow_rate_gpm.round(2)}gpm #{water_use_temperature_f.round}F")
+        water_fixture.setSpace(space)
+      end
+
+      # add to the service water loop if provided
+      unless service_water_loop.nil?
+        service_water_loop.addDemandBranchForComponent(swh_connection)
+        OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.ServiceWaterHeating', "Adding water fixture to #{service_water_loop.name}.")
+      end
+
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.ServiceWaterHeating', "Added #{water_fixture.name}.")
+
+      return water_fixture
+    end
+
+    # @!endgroup Create Water Use
+  end
+end

data/lib/openstudio-standards/space/space.rb

@@ -1,5 +1,5 @@
-# Methods to obtain information about model spaces
 module OpenstudioStandards
+  # The Space module provides methods get information about model spaces
   module Space
     # @!group Space