openstudio-standards 0.2.15.pre.rc2 → 0.2.16.rc2

data/lib/openstudio-standards/standards/necb/NECB2020/building_envelope.rb

@@ -1,314 +1,5 @@
-class NECB2020
-
-  # Reduces the WWR to the values specified by the NECB
-  # NECB 3.2.1.4
-  def apply_standard_window_to_wall_ratio(model:, fdwr_set: -1.0)
-    # NECB FDWR limit
-    hdd = self.get_necb_hdd18(model)
-
-    # Get the maximum NECB fdwr
-    # fdwr_set settings:
-    # 0-1:  Remove all windows and add windows to match this fdwr
-    # -1:  Remove all windows and add windows to match max fdwr from NECB
-    # -2:  Do not apply any fdwr changes, leave windows alone (also works for fdwr > 1)
-    # -3:  Use old method which reduces existing window size (if necessary) to meet maximum NECB fdwr limit
-    # <-3.1:  Remove all the windows
-    # > 1:  Do nothing
-
-    if fdwr_set.to_f > 1.0
-      return
-    elsif fdwr_set.to_f >= 0.0 and fdwr_set <= 1.0
-      apply_max_fdwr_nrcan(model: model, fdwr_lim: fdwr_set.to_f)
-      return
-    elsif fdwr_set.to_f >= -1.1 and fdwr_set <= -0.9
-      fdwr_lim = (max_fwdr(hdd)).round(3)
-      apply_max_fdwr_nrcan(model: model, fdwr_lim: fdwr_lim.to_f)
-      return
-    elsif fdwr_set.to_f >= -2.1 and fdwr_set <= -1.9
-      return
-    elsif fdwr_set.to_f >= -3.1 and fdwr_set <= -2.9
-      fdwr_lim = (max_fwdr(hdd) * 100.0).round(1)
-      return apply_limit_fdwr(model: model, fdwr_lim: fdwr_lim.to_f)
-    elsif fdwr_set < -3.1
-      apply_max_fdwr_nrcan(model: model, fdwr_lim: fdwr_set.to_f)
-      return
-    end
-  end
-
-  def apply_limit_fdwr(model:, fdwr_lim:)
-    # Loop through all spaces in the model, and
-    # per the PNNL PRM Reference Manual, find the areas
-    # of each space conditioning category (res, nonres, semi-heated)
-    # separately.  Include space multipliers.
-    nr_wall_m2 = 0.001 # Avoids divide by zero errors later
-    nr_wind_m2 = 0
-    res_wall_m2 = 0.001
-    res_wind_m2 = 0
-    sh_wall_m2 = 0.001
-    sh_wind_m2 = 0
-    total_wall_m2 = 0.001
-    total_subsurface_m2 = 0.0
-    # Store the space conditioning category for later use
-    space_cats = {}
-    model.getSpaces.sort.each do |space|
-      # Loop through all surfaces in this space
-      wall_area_m2 = 0
-      wind_area_m2 = 0
-      space.surfaces.sort.each do |surface|
-        # Skip non-outdoor surfaces
-        next unless surface.outsideBoundaryCondition == 'Outdoors'
-        # Skip non-walls
-        next unless surface.surfaceType.casecmp('wall').zero?
-        # This wall's gross area (including window area)
-        wall_area_m2 += surface.grossArea * space.multiplier
-        # Subsurfaces in this surface
-        surface.subSurfaces.sort.each do |ss|
-          wind_area_m2 += ss.netArea * space.multiplier
-        end
-      end
-
-      # Determine the space category
-      # zTODO This should really use the heating/cooling loads
-      # from the proposed building.  However, in an attempt
-      # to avoid another sizing run just for this purpose,
-      # conditioned status is based on heating/cooling
-      # setpoints.  If heated-only, will be assumed Semiheated.
-      # The full-bore method is on the next line in case needed.
-      # cat = thermal_zone_conditioning_category(space, template, climate_zone)
-      cooled = space_cooled?(space)
-      heated = space_heated?(space)
-      cat = 'Unconditioned'
-      # Unconditioned
-      if !heated && !cooled
-        cat = 'Unconditioned'
-        # Heated-Only
-      elsif heated && !cooled
-        cat = 'Semiheated'
-        # Heated and Cooled
-      else
-        res = thermal_zone_residential?(space.thermalZone.get)
-        cat = if res
-                'ResConditioned'
-              else
-                'NonResConditioned'
-              end
-      end
-      space_cats[space] = cat
-      # NECB2011 keep track of totals for NECB regardless of conditioned or not.
-      total_wall_m2 += wall_area_m2
-      total_subsurface_m2 += wind_area_m2 # this contains doors as well.
-
-      # Add to the correct category
-      case cat
-      when 'Unconditioned'
-        next # Skip unconditioned spaces
-      when 'NonResConditioned'
-        nr_wall_m2 += wall_area_m2
-        nr_wind_m2 += wind_area_m2
-      when 'ResConditioned'
-        res_wall_m2 += wall_area_m2
-        res_wind_m2 += wind_area_m2
-      when 'Semiheated'
-        sh_wall_m2 += wall_area_m2
-        sh_wind_m2 += wind_area_m2
-      end
-    end
-
-    # Calculate the WWR of each category
-    wwr_nr = ((nr_wind_m2 / nr_wall_m2) * 100.0).round(1)
-    wwr_res = ((res_wind_m2 / res_wall_m2) * 100).round(1)
-    wwr_sh = ((sh_wind_m2 / sh_wall_m2) * 100).round(1)
-    fdwr = ((total_subsurface_m2 / total_wall_m2) * 100).round(1) # used by NECB2011
-
-    # Convert to IP and report
-    nr_wind_ft2 = OpenStudio.convert(nr_wind_m2, 'm^2', 'ft^2').get
-    nr_wall_ft2 = OpenStudio.convert(nr_wall_m2, 'm^2', 'ft^2').get
-
-    res_wind_ft2 = OpenStudio.convert(res_wind_m2, 'm^2', 'ft^2').get
-    res_wall_ft2 = OpenStudio.convert(res_wall_m2, 'm^2', 'ft^2').get
-
-    sh_wind_ft2 = OpenStudio.convert(sh_wind_m2, 'm^2', 'ft^2').get
-    sh_wall_ft2 = OpenStudio.convert(sh_wall_m2, 'm^2', 'ft^2').get
-
-    OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.Model', "WWR NonRes = #{wwr_nr.round}%; window = #{nr_wind_ft2.round} ft2, wall = #{nr_wall_ft2.round} ft2.")
-    OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.Model', "WWR Res = #{wwr_res.round}%; window = #{res_wind_ft2.round} ft2, wall = #{res_wall_ft2.round} ft2.")
-    OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.Model', "WWR Semiheated = #{wwr_sh.round}%; window = #{sh_wind_ft2.round} ft2, wall = #{sh_wall_ft2.round} ft2.")
-
-    # WWR limit
-    wwr_lim = 40.0
-
-    # Check against WWR limit
-    red_nr = wwr_nr > wwr_lim
-    red_res = wwr_res > wwr_lim
-    red_sh = wwr_sh > wwr_lim
-
-    # puts "Current FDWR is #{fdwr}, must be less than #{fdwr_lim}."
-    # puts "Current subsurf area is #{total_subsurface_m2} and gross surface area is #{total_wall_m2}"
-    # Stop here unless windows / doors need reducing
-    return true unless fdwr > fdwr_lim
-    OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.Model', "Reducing the size of all windows (by raising sill height) to reduce window area down to the limit of #{wwr_lim.round}%.")
-    # Determine the factors by which to reduce the window / door area
-    mult = fdwr_lim / fdwr
-    # Reduce the window area if any of the categories necessary
-    model.getSpaces.sort.each do |space|
-      # Loop through all surfaces in this space
-      space.surfaces.sort.each do |surface|
-        # Skip non-outdoor surfaces
-        next unless surface.outsideBoundaryCondition == 'Outdoors'
-        # Skip non-walls
-        next unless surface.surfaceType == 'Wall'
-        # Subsurfaces in this surface
-        surface.subSurfaces.sort.each do |ss|
-          # Reduce the size of the window
-          red = 1.0 - mult
-          sub_surface_reduce_area_by_percent_by_raising_sill(ss, red)
-        end
-      end
-    end
-    return true
-  end
-
-  # Reduces the SRR to the values specified by the PRM. SRR reduction
-  # will be done by shrinking vertices toward the centroid.
-  #
-  def apply_standard_skylight_to_roof_ratio(model:, srr_set: -1.0)
-
-    # If srr_set is between 1.0 and 1.2 set it to the maximum allowed by the NECB.  If srr_set is between 0.0 and 1.0
-    # apply whatever was passed.  If srr_set >= 1.2 then set the existing srr of the building to be the necb maximum
-    # only if the the srr exceeds this maximum (otherwise leave it to be whatever was modeled).
-
-    # srr_set settings:
-    # 0-1:  Remove all skylights and add skylights to match this srr
-    # -1:  Remove all skylights and add skylights to match max srr from NECB
-    # -2:  Do not apply any srr changes, leave skylights alone (also works for srr > 1)
-    # -3:  Use old method which reduces existing skylight size (if necessary) to meet maximum NECB skylight limit
-    # <-3.1:  Remove all the skylights
-    # > 1:  Do nothing
-
-    if srr_set.to_f > 1.0
-      return
-    elsif srr_set.to_f >= 0.0 && srr_set <= 1.0
-      apply_max_srr_nrcan(model: model, srr_lim: srr_set.to_f)
-      return
-    elsif srr_set.to_f >= -1.1 && srr_set <= -0.9
-      # Get the maximum NECB srr
-      srr_lim = self.get_standards_constant('skylight_to_roof_ratio_max_value')
-      apply_max_srr_nrcan(model: model, srr_lim: srr_lim.to_f)
-      return
-    elsif srr_set.to_f >= -2.1 && srr_set <= -1.9
-      return
-    elsif srr_set.to_f >= -3.1 && srr_set <= -2.9
-      # Continue with the rest of this method, use old method which reduces existing skylight size (if necessary) to
-      # meet maximum srr limit
-    elsif srr_set < -3.1
-      apply_max_srr_nrcan(model: model, srr_lim: srr_set.to_f)
-      return
-    else
-      return
-    end
-
-    # SRR limit
-    srr_lim = self.get_standards_constant('skylight_to_roof_ratio_max_value') * 100.0
-
-    # Loop through all spaces in the model, and
-    # per the PNNL PRM Reference Manual, find the areas
-    # of each space conditioning category (res, nonres, semi-heated)
-    # separately.  Include space multipliers.
-    nr_wall_m2 = 0.001 # Avoids divide by zero errors later
-    nr_sky_m2 = 0
-    res_wall_m2 = 0.001
-    res_sky_m2 = 0
-    sh_wall_m2 = 0.001
-    sh_sky_m2 = 0
-    total_roof_m2 = 0.001
-    total_subsurface_m2 = 0
-    model.getSpaces.sort.each do |space|
-      # Loop through all surfaces in this space
-      wall_area_m2 = 0
-      sky_area_m2 = 0
-      space.surfaces.sort.each do |surface|
-        # Skip non-outdoor surfaces
-        next unless surface.outsideBoundaryCondition == 'Outdoors'
-        # Skip non-walls
-        next unless surface.surfaceType == 'RoofCeiling'
-        # This wall's gross area (including skylight area)
-        wall_area_m2 += surface.grossArea * space.multiplier
-        # Subsurfaces in this surface
-        surface.subSurfaces.sort.each do |ss|
-          sky_area_m2 += ss.netArea * space.multiplier
-        end
-      end
-
-      # Determine the space category
-      cat = 'NonRes'
-      if space_residential?(space)
-        cat = 'Res'
-      end
-      # if space.is_semiheated
-      # cat = 'Semiheated'
-      # end
-
-      # Add to the correct category
-      case cat
-      when 'NonRes'
-        nr_wall_m2 += wall_area_m2
-        nr_sky_m2 += sky_area_m2
-      when 'Res'
-        res_wall_m2 += wall_area_m2
-        res_sky_m2 += sky_area_m2
-      when 'Semiheated'
-        sh_wall_m2 += wall_area_m2
-        sh_sky_m2 += sky_area_m2
-      end
-      total_roof_m2 += wall_area_m2
-      total_subsurface_m2 += sky_area_m2
-    end
-
-    # Calculate the SRR of each category
-    srr_nr = ((nr_sky_m2 / nr_wall_m2) * 100).round(1)
-    srr_res = ((res_sky_m2 / res_wall_m2) * 100).round(1)
-    srr_sh = ((sh_sky_m2 / sh_wall_m2) * 100).round(1)
-    srr = ((total_subsurface_m2 / total_roof_m2) * 100.0).round(1)
-    OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.Model', "The skylight to roof ratios (SRRs) are: NonRes: #{srr_nr.round}%, Res: #{srr_res.round}%.")
-
-    # Check against SRR limit
-    red_nr = srr_nr > srr_lim
-    red_res = srr_res > srr_lim
-    red_sh = srr_sh > srr_lim
 
-    # Stop here unless windows need reducing
-    return true unless srr > srr_lim
-    OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.Model', "Reducing the size of all windows (by raising sill height) to reduce window area down to the limit of #{srr_lim.round}%.")
-    # Determine the factors by which to reduce the window / door area
-    mult = srr_lim / srr
-
-    # Reduce the subsurface areas
-    model.getSpaces.sort.each do |space|
-      # Loop through all surfaces in this space
-      space.surfaces.sort.each do |surface|
-        # Skip non-outdoor surfaces
-        next unless surface.outsideBoundaryCondition == 'Outdoors'
-        # Skip non-walls
-        next unless surface.surfaceType == 'RoofCeiling'
-        # Subsurfaces in this surface
-        surface.subSurfaces.sort.each do |ss|
-          # Reduce the size of the subsurface
-          red = 1.0 - mult
-          sub_surface_reduce_area_by_percent_by_shrinking_toward_centroid(ss, red)
-        end
-      end
-    end
-
-    return true
-  end
-
-  # @author phylroy.lopez@nrcan.gc.ca
-  # @param hdd [Float]
-  # @return [Double] a constant float
-  def max_fwdr(hdd)
-    #  get formula from json database.
-    return eval(get_standards_formula('fdwr_formula'))
-  end
+class NECB2020
 
   # Go through the default construction sets and hard-assigned
   # constructions. Clone the existing constructions and set their
@@ -365,20 +56,21 @@ class NECB2020
         return false
       end
 
+      # hdd required to get correct conductance values from the json file.
+      hdd = get_necb_hdd18(model)
+	  
       # Lambdas are preferred over methods in methods for small utility methods.
       correct_cond = lambda do |conductivity, surface_type|
-        # hdd required in scope for eval function.
-        hdd = get_necb_hdd18(model)
-        return conductivity.nil? || conductivity.to_f <= 0.0 || conductivity =="NECB_Default"  ? eval(model_find_objects(@standards_data['surface_thermal_transmittance'], surface_type)[0]['formula']) : conductivity.to_f
+        return conductivity.nil? || conductivity.to_f <= 0.0 || conductivity == 'NECB_Default' ? eval(model_find_objects(@standards_data['surface_thermal_transmittance'], surface_type)[0]['formula']) : conductivity.to_f
       end
 
       # Converts trans and vis to nil if requesting default.. or casts the string to a float.
       correct_vis_trans = lambda do |value|
-        return value.nil? || value.to_f <= 0.0 || value =="NECB_Default"  ? nil : value.to_f
+        return value.nil? || value.to_f <= 0.0 || value == 'NECB_Default' ? nil : value.to_f
       end
 
       BTAP::Resources::Envelope::ConstructionSets.customize_default_surface_construction_set!(model: model,
-                                                                                              name: "#{default_surface_construction_set.name.get} at hdd = #{get_necb_hdd18(model)}",
+                                                                                              name: "#{default_surface_construction_set.name.get} at hdd = #{hdd}",
                                                                                               default_surface_construction_set: default_surface_construction_set,
                                                                                               # ext surfaces
                                                                                               ext_wall_cond: correct_cond.call(ext_wall_cond, {'boundary_condition' => 'Outdoors', 'surface' => 'Wall'}),
@@ -416,57 +108,12 @@ class NECB2020
                                                                                               tubular_daylight_diffuser_solar_trans: correct_vis_trans.call(tubular_daylight_diffuser_solar_trans),
                                                                                               tubular_daylight_diffuser_vis_trans: correct_vis_trans.call(tubular_daylight_diffuser_vis_trans)
       )
-
-
     end
     # sets all surfaces to use default constructions sets except adiabatic, where it does a hard assignment of the interior wall construction type.
     model.getPlanarSurfaces.sort.each(&:resetConstruction)
     # if the default construction set is defined..try to assign the interior wall to the adiabatic surfaces
     BTAP::Resources::Envelope.assign_interior_surface_construction_to_adiabatic_surfaces(model, nil)
     BTAP.runner_register('Info', ' apply_standard_construction_properties was sucessful.', runner)
-
-  end
-
-  # Set all external surface conductances to NECB values.
-  # @author phylroy.lopez@nrcan.gc.ca
-  # @param surface [String]
-  # @param hdd [Float]
-  # @param is_radiant [Boolian]
-  # @param scaling_factor [Float]
-  # @return [String] surface as RSI
-  def set_necb_external_surface_conductance(surface, hdd, is_radiant = false, scaling_factor = 1.0)
-    conductance_value = 0
-
-    if surface.outsideBoundaryCondition.casecmp('outdoors').zero?
-
-      case surface.surfaceType.downcase
-      when 'wall'
-        conductance_value = @standards_data['conductances']['Wall'].find { |i| i['hdd'] > hdd }['thermal_transmittance'] * scaling_factor
-      when 'floor'
-        conductance_value = @standards_data['conductances']['Floor'].find { |i| i['hdd'] > hdd }['thermal_transmittance'] * scaling_factor
-      when 'roofceiling'
-        conductance_value = @standards_data['conductances']['Roof'].find { |i| i['hdd'] > hdd }['thermal_transmittance'] * scaling_factor
-      end
-      if is_radiant
-        conductance_value *= 0.80
-      end
-      return BTAP::Geometry::Surfaces.set_surfaces_construction_conductance([surface], conductance_value)
-    end
-
-    if surface.outsideBoundaryCondition.downcase =~ /ground/
-      case surface.surfaceType.downcase
-      when 'wall'
-        conductance_value = @standards_data['conductances']['GroundWall'].find { |i| i['hdd'] > hdd }['thermal_transmittance'] * scaling_factor
-      when 'floor'
-        conductance_value = @standards_data['conductances']['GroundFloor'].find { |i| i['hdd'] > hdd }['thermal_transmittance'] * scaling_factor
-      when 'roofceiling'
-        conductance_value = @standards_data['conductances']['GroundRoof'].find { |i| i['hdd'] > hdd }['thermal_transmittance'] * scaling_factor
-      end
-      if is_radiant
-        conductance_value *= 0.80
-      end
-      return BTAP::Geometry::Surfaces.set_surfaces_construction_conductance([surface], conductance_value)
-    end
   end
 
   # Set all external subsurfaces (doors, windows, skylights) to NECB values.
@@ -480,300 +127,12 @@ class NECB2020
       case subsurface.subSurfaceType.downcase
       when /window/
         conductance_value = @standards_data['conductances']['Window'].find { |i| i['hdd'] > hdd }['thermal_transmittance'] * scaling_factor
+      when /skylight/
+        conductance_value = @standards_data['conductances']['Skylight'].find { |i| i['hdd'] > hdd }['thermal_transmittance'] * scaling_factor
       when /door/
         conductance_value = @standards_data['conductances']['Door'].find { |i| i['hdd'] > hdd }['thermal_transmittance'] * scaling_factor
       end
       subsurface.setRSI(1 / conductance_value)
     end
   end
-
-  # Adds code-minimum constructions based on the building type
-  # as defined in the OpenStudio_Standards_construction_sets.json file.
-  # Where there is a separate construction set specified for the
-  # individual space type, this construction set will be created and applied
-  # to this space type, overriding the whole-building construction set.
-  #
-  # @param building_type [String] the type of building
-  # @param climate_zone [String] the name of the climate zone the building is in
-  # @return [Bool] returns true if successful, false if not
-  def model_add_constructions(model)
-    OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Started applying constructions')
-
-    # Assign construction to adiabatic construction
-    # Assign a material to all internal mass objects
-    assign_contruction_to_adiabatic_surfaces(model)
-    # The constructions lookup table uses a slightly different list of
-    # building types.
-    apply_building_default_constructionset(model)
-    # Make a construction set for each space type, if one is specified
-    # apply_default_constructionsets_to_spacetypes(climate_zone, model)
-    OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Finished applying constructions')
-    return true
-  end
-
-  def apply_building_default_constructionset(model)
-
-    bldg_def_const_set = model_add_construction_set_from_osm(model: model)
-    model.getBuilding.setDefaultConstructionSet(bldg_def_const_set)
-
-  end
-
-  def apply_default_constructionsets_to_spacetypes(climate_zone, model)
-    model.getSpaceTypes.sort.each do |space_type|
-      # Get the standards building type
-      stds_building_type = nil
-      if space_type.standardsBuildingType.is_initialized
-        stds_building_type = space_type.standardsBuildingType.get
-      else
-        OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', "Space type called '#{space_type.name}' has no standards building type.")
-      end
-
-      # Get the standards space type
-      stds_spc_type = nil
-      if space_type.standardsSpaceType.is_initialized
-        stds_spc_type = space_type.standardsSpaceType.get
-      else
-        OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', "Space type called '#{space_type.name}' has no standards space type.")
-      end
-
-      # If the standards space type is Attic,
-      # the building type should be blank.
-      if stds_spc_type == 'Attic'
-        stds_building_type = ''
-      end
-
-      # Attempt to make a construction set for this space type
-      # and assign it if it can be created.
-      spc_type_const_set = model_add_construction_set_from_osm(model: model)
-      if spc_type_const_set.is_initialized
-        space_type.setDefaultConstructionSet(spc_type_const_set.get)
-      end
-    end
-  end
-
-  def model_add_construction_set_from_osm(model:,
-                                          construction_set_name: 'BTAP-Mass',
-                                          osm_path: File.absolute_path(File.join(__FILE__, '..', '..', 'common/construction_defaults.osm')))
-    # load resources model
-    construction_library = BTAP::FileIO::load_osm(osm_path)
-
-    if not construction_library.getDefaultConstructionSetByName(construction_set_name.to_s).is_initialized
-      runner.registerError('Did not find the expected construction in library.')
-      return false
-    end
-    selected_construction_set = construction_library.getDefaultConstructionSetByName(construction_set_name.to_s).get
-    new_construction_set = selected_construction_set.clone(model).to_DefaultConstructionSet.get
-    return new_construction_set
-  end
-
-  def assign_contruction_to_adiabatic_surfaces(model)
-    cp02_carpet_pad = OpenStudio::Model::MasslessOpaqueMaterial.new(model)
-    cp02_carpet_pad.setName('CP02 CARPET PAD')
-    cp02_carpet_pad.setRoughness('VeryRough')
-    cp02_carpet_pad.setThermalResistance(0.21648)
-    cp02_carpet_pad.setThermalAbsorptance(0.9)
-    cp02_carpet_pad.setSolarAbsorptance(0.7)
-    cp02_carpet_pad.setVisibleAbsorptance(0.8)
-
-    normalweight_concrete_floor = OpenStudio::Model::StandardOpaqueMaterial.new(model)
-    normalweight_concrete_floor.setName('100mm Normalweight concrete floor')
-    normalweight_concrete_floor.setRoughness('MediumSmooth')
-    normalweight_concrete_floor.setThickness(0.1016)
-    normalweight_concrete_floor.setConductivity(2.31)
-    normalweight_concrete_floor.setDensity(2322)
-    normalweight_concrete_floor.setSpecificHeat(832)
-
-    nonres_floor_insulation = OpenStudio::Model::MasslessOpaqueMaterial.new(model)
-    nonres_floor_insulation.setName('Nonres_Floor_Insulation')
-    nonres_floor_insulation.setRoughness('MediumSmooth')
-    nonres_floor_insulation.setThermalResistance(2.88291975297193)
-    nonres_floor_insulation.setThermalAbsorptance(0.9)
-    nonres_floor_insulation.setSolarAbsorptance(0.7)
-    nonres_floor_insulation.setVisibleAbsorptance(0.7)
-
-    floor_adiabatic_construction = OpenStudio::Model::Construction.new(model)
-    floor_adiabatic_construction.setName('Floor Adiabatic construction')
-    floor_layers = OpenStudio::Model::MaterialVector.new
-    floor_layers << cp02_carpet_pad
-    floor_layers << normalweight_concrete_floor
-    floor_layers << nonres_floor_insulation
-    floor_adiabatic_construction.setLayers(floor_layers)
-
-    g01_13mm_gypsum_board = OpenStudio::Model::StandardOpaqueMaterial.new(model)
-    g01_13mm_gypsum_board.setName('G01 13mm gypsum board')
-    g01_13mm_gypsum_board.setRoughness('Smooth')
-    g01_13mm_gypsum_board.setThickness(0.0127)
-    g01_13mm_gypsum_board.setConductivity(0.1600)
-    g01_13mm_gypsum_board.setDensity(800)
-    g01_13mm_gypsum_board.setSpecificHeat(1090)
-    g01_13mm_gypsum_board.setThermalAbsorptance(0.9)
-    g01_13mm_gypsum_board.setSolarAbsorptance(0.7)
-    g01_13mm_gypsum_board.setVisibleAbsorptance(0.5)
-
-    wall_adiabatic_construction = OpenStudio::Model::Construction.new(model)
-    wall_adiabatic_construction.setName('Wall Adiabatic construction')
-    wall_layers = OpenStudio::Model::MaterialVector.new
-    wall_layers << g01_13mm_gypsum_board
-    wall_layers << g01_13mm_gypsum_board
-    wall_adiabatic_construction.setLayers(wall_layers)
-
-    m10_200mm_concrete_block_basement_wall = OpenStudio::Model::StandardOpaqueMaterial.new(model)
-    m10_200mm_concrete_block_basement_wall.setName('M10 200mm concrete block basement wall')
-    m10_200mm_concrete_block_basement_wall.setRoughness('MediumRough')
-    m10_200mm_concrete_block_basement_wall.setThickness(0.2032)
-    m10_200mm_concrete_block_basement_wall.setConductivity(1.326)
-    m10_200mm_concrete_block_basement_wall.setDensity(1842)
-    m10_200mm_concrete_block_basement_wall.setSpecificHeat(912)
-
-    basement_wall_construction = OpenStudio::Model::Construction.new(model)
-    basement_wall_construction.setName('Basement Wall construction')
-    basement_wall_layers = OpenStudio::Model::MaterialVector.new
-    basement_wall_layers << m10_200mm_concrete_block_basement_wall
-    basement_wall_construction.setLayers(basement_wall_layers)
-
-    basement_floor_construction = OpenStudio::Model::Construction.new(model)
-    basement_floor_construction.setName('Basement Floor construction')
-    basement_floor_layers = OpenStudio::Model::MaterialVector.new
-    basement_floor_layers << m10_200mm_concrete_block_basement_wall
-    basement_floor_layers << cp02_carpet_pad
-    basement_floor_construction.setLayers(basement_floor_layers)
-
-    model.getSurfaces.sort.each do |surface|
-      if surface.outsideBoundaryCondition.to_s == 'Adiabatic'
-        if surface.surfaceType.to_s == 'Wall'
-          surface.setConstruction(wall_adiabatic_construction)
-        else
-          surface.setConstruction(floor_adiabatic_construction)
-        end
-      elsif surface.outsideBoundaryCondition.to_s == 'OtherSideCoefficients'
-        # Ground
-        if surface.surfaceType.to_s == 'Wall'
-          surface.setOutsideBoundaryCondition('Ground')
-          surface.setConstruction(basement_wall_construction)
-        else
-          surface.setOutsideBoundaryCondition('Ground')
-          surface.setConstruction(basement_floor_construction)
-        end
-      end
-    end
-  end
-
-  def scale_model_geometry(model, x_scale, y_scale, z_scale)
-    # Identity matrix for setting space origins
-    m = OpenStudio::Matrix.new(4, 4, 0)
-
-    m[0, 0] = 1.0 / x_scale
-    m[1, 1] = 1.0 / y_scale
-    m[2, 2] = 1.0 / z_scale
-    m[3, 3] = 1.0
-    t = OpenStudio::Transformation.new(m)
-    model.getPlanarSurfaceGroups().each do |planar_surface|
-      planar_surface.changeTransformation(t)
-    end
-    return model
-  end
-
-  # This method applies the maximum fenestration and door to wall ratio to a building as per NECB 2011 8.4.4.3 and
-  # 3.2.1.4 (or equivalent in other versions of the NECB).  It first checks for al exterior walls adjacent to conditioned
-  # spaces.  It distinguishes between plenums and other conditioned spaces.  It uses both to calculate the maximum window
-  # area to be applied to the building but attempts to put these windows only on non-plenum conditioned spaces (if
-  # possible).
-  def apply_max_fdwr_nrcan(model:, fdwr_lim:)
-    # First determine which vertical (between 89 and 91 degrees from horizontal) walls are adjacent to conditioned
-    # spaces.
-    exp_surf_info = find_exposed_conditioned_vertical_surfaces(model)
-    # If there are none (or very few) then throw a warning.
-    if exp_surf_info["total_exp_wall_area_m2"] < 0.1
-      OpenStudio.logFree(OpenStudio::Warn, 'openstudio.model.Model', "This building has no exposed walls adjacent to heated spaces.")
-      return false
-    end
-
-    construct_set = model.getBuilding.defaultConstructionSet.get
-    fixed_window_construct_set = construct_set.defaultExteriorSubSurfaceConstructions.get.fixedWindowConstruction.get
-
-    # IF FDWR is greater than 1 then something is wrong raise an error.  If it is less than 0.001 assume all the windows
-    # should go.
-    if fdwr_lim > 1
-      OpenStudio.logFree(OpenStudio::Error, 'openstudio.model.Model', "This building requires a larger window area than there is wall area.")
-      return false
-    elsif fdwr_lim < 0.001
-      exp_surf_info["exp_nonplenum_walls"].sort.each do |exp_surf|
-        remove_All_Subsurfaces(surface: exp_surf)
-      end
-      return true
-    end
-    # Get the required window area.
-    win_area = fdwr_lim * exp_surf_info["total_exp_wall_area_m2"]
-    # Try to put the windows on non-plenum walls if possible.  So determine if you can fit the required window area
-    # on the non-plenum wall area.
-    if win_area <= exp_surf_info["exp_nonplenum_wall_area_m2"]
-      # If you can fit the windows on the non-plenum wall area then recalculate the window ratio so that is is only for
-      # the non-plenum walls.
-      nonplenum_fdwr = win_area / exp_surf_info["exp_nonplenum_wall_area_m2"]
-      exp_surf_info["exp_nonplenum_walls"].sort.each do |exp_surf|
-        # Remove any subsurfaces, add the window, set the name to be whatever the surface name is plus the subsurface
-        # type (which will be 'fixedwindow')
-        remove_All_Subsurfaces(surface: exp_surf)
-        set_Window_To_Wall_Ratio_set_name(surface: exp_surf, area_fraction: nonplenum_fdwr, construction: fixed_window_construct_set)
-      end
-    else
-      # There was not enough non-plenum wall area so add the windows to both the plenum and non-plenum walls.  This is
-      # done separately because the 'find_exposed_conditioned_vertical_surfaces' method returns the plenum and
-      # non-plenum walls separately.
-      exp_surf_info["exp_nonplenum_walls"].sort.each do |exp_surf|
-        # Remove any subsurfaces, add the window, set the name to be whatever the surface name is plus the subsurface
-        # type (which will be 'fixedwindow')
-        remove_All_Subsurfaces(surface: exp_surf)
-        set_Window_To_Wall_Ratio_set_name(surface: exp_surf, area_fraction: fdwr_lim, construction: fixed_window_construct_set)
-      end
-      exp_surf_info["exp_plenum_walls"].sort.each do |exp_surf|
-        # Remove any subsurfaces, add the window, set the name to be whatever the surface name is plus the subsurface
-        # type (which will be 'fixedwindow')
-        remove_All_Subsurfaces(surface: exp_surf)
-        set_Window_To_Wall_Ratio_set_name(surface: exp_surf, area_fraction: fdwr_lim, construction: fixed_window_construct_set)
-      end
-    end
-    return true
-  end
-
-  # This method is similar to the 'apply_max_fdwr' method above but applies the maximum skylight to roof area ratio to a
-  # building as per NECB 2011 8.4.4.3 and 3.2.1.4 (or equivalent in other versions of the NECB).  It first checks for all
-  # exterior roofs adjacent to conditioned spaces.  It distinguishes between plenums and other conditioned spaces.  It
-  # uses only the non-plenum roof area to calculate the maximum skylight area to be applied to the building.
-  def apply_max_srr_nrcan(model:, srr_lim:)
-    # First determine which roof surfaces are adjacent to heated spaces (both plenum and non-plenum).
-    exp_surf_info = find_exposed_conditioned_roof_surfaces(model)
-    # If the non-plenum roof area is very small raise a warning.  It may be perfectly fine but it is probably a good
-    # idea to warn the user.
-    if exp_surf_info["exp_nonplenum_roof_area_m2"] < 0.1
-      OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', "This building has no exposed ceilings adjacent to spaces that are not attics or plenums.  No skylights will be added.")
-      return false
-    end
-
-    # If the SRR is greater than one something is seriously wrong so raise an error.  If it is less than 0.001 assume
-    # all the skylights should go.
-    if srr_lim > 1
-      OpenStudio.logFree(OpenStudio::Error, 'openstudio.model.Model', "This building requires a larger skylight area than there is roof area.")
-      return false
-    elsif srr_lim < 0.001
-      exp_surf_info["exp_nonplenum_roofs"].sort.each do |exp_surf|
-        remove_All_Subsurfaces(surface: exp_surf)
-      end
-      return true
-    end
-
-    construct_set = model.getBuilding.defaultConstructionSet.get
-    skylight_construct_set = construct_set.defaultExteriorSubSurfaceConstructions.get.skylightConstruction.get
-
-    # Go through all of exposed roofs adjacent to heated, non-plenum spaces, remove any existing subsurfaces, and add
-    # a skylight in the centroid of the surface, with the same shape of the surface, only scaled to be the area
-    # determined by the SRR.  The name of the skylight will be the surface name with the subsurface type attached
-    # ('skylight' in this case).  Note that this method will only work if the surface does not fold into itself (like an
-    # L or a V).
-    exp_surf_info["exp_nonplenum_roofs"].sort.each do |roof|
-      # sub_surface_create_centered_subsurface_from_scaled_surface(roof, srr_lim, model)
-      sub_surface_create_scaled_subsurfaces_from_surface(surface: roof, area_fraction: srr_lim, model: model, consturction: skylight_construct_set)
-    end
-    return true
-  end
-end
+end