openstudio-extension 0.7.0 → 0.8.0

data/lib/openstudio/extension/core/check_mech_sys_part_load_eff.rb

@@ -1,434 +0,0 @@
-# *******************************************************************************
-# OpenStudio(R), Copyright (c) Alliance for Sustainable Energy, LLC.
-# See also https://openstudio.net/license
-# *******************************************************************************
-
-module OsLib_QAQC
-  # include any general notes about QAQC method here
-  # 'standard performance curves' based on what is in OpenStudio standards for prototype building
-  # initially the tollerance will be hard coded vs. passed in as a method argument
-
-  # checks the number of unmet hours in the model
-  def check_mech_sys_part_load_eff(category, target_standard, min_pass, max_pass, name_only = false)
-    if target_standard.include?('90.1')
-      display_standard = "ASHRAE #{target_standard}"
-    else
-      display_standard = target_standard
-    end
-
-    component_type_array = ['ChillerElectricEIR', 'CoilCoolingDXSingleSpeed', 'CoilCoolingDXTwoSpeed', 'CoilHeatingDXSingleSpeed']
-
-    # summary of the check
-    check_elems = OpenStudio::AttributeVector.new
-    check_elems << OpenStudio::Attribute.new('name', 'Mechanical System Part Load Efficiency')
-    check_elems << OpenStudio::Attribute.new('category', category)
-    check_elems << OpenStudio::Attribute.new('description', "Check 40% and 80% part load efficency against #{display_standard} for the following compenent types: #{component_type_array.join(', ')}. Checking EIR Function of Part Load Ratio curve for chiller and EIR Function of Flow Fraction for DX coils.")
-    # TODO: - add in check for VAV fan
-
-    # stop here if only name is requested this is used to populate display name for arguments
-    if name_only == true
-      results = []
-      check_elems.each do |elem|
-        results << elem.valueAsString
-      end
-      return results
-    end
-
-    # Versions of OpenStudio greater than 2.4.0 use a modified version of
-    # openstudio-standards with different method calls.  These methods
-    # require a "Standard" object instead of the standard being passed into method calls.
-    # This Standard object is used throughout the QAQC check.
-    if OpenStudio::VersionString.new(OpenStudio.openStudioVersion) < OpenStudio::VersionString.new('2.4.3')
-      use_old_gem_code = true
-    else
-      use_old_gem_code = false
-      std = Standard.build(target_standard)
-    end
-
-    begin
-      # TODO: - in future would be nice to dynamically genrate list of possible options from standards json
-      chiller_air_cooled_condenser_types = ['WithCondenser', 'WithoutCondenser']
-      chiller_water_cooled_compressor_types = ['Reciprocating', 'Scroll', 'Rotary Screw', 'Centrifugal']
-      absorption_types = ['Single Effect', 'Double Effect Indirect Fired', 'Double Effect Direct Fired']
-
-      # check getChillerElectricEIRs objects (will also have curve check in different script)
-      @model.getChillerElectricEIRs.each do |component|
-        # get curve and evaluate
-        electric_input_to_cooling_output_ratio_function_of_PLR = component.electricInputToCoolingOutputRatioFunctionOfPLR
-        curve_40_pct = electric_input_to_cooling_output_ratio_function_of_PLR.evaluate(0.4)
-        curve_80_pct = electric_input_to_cooling_output_ratio_function_of_PLR.evaluate(0.8)
-
-        # find ac properties
-        if use_old_gem_code
-          search_criteria = component.find_search_criteria(target_standard)
-        else
-          search_criteria = std.chiller_electric_eir_find_search_criteria(component)
-        end
-
-        # extend search_criteria for absorption_type
-        absorption_types.each do |absorption_type|
-          if component.name.to_s.include?(absorption_type)
-            search_criteria['absorption_type'] = absorption_type
-            next
-          end
-        end
-        # extend search_criteria for condenser type or compressor type
-        if search_criteria['cooling_type'] == 'AirCooled'
-          chiller_air_cooled_condenser_types.each do |condenser_type|
-            if component.name.to_s.include?(condenser_type)
-              search_criteria['condenser_type'] = condenser_type
-              next
-            end
-          end
-          # if no match and also no absorption_type then issue warning
-          if !search_criteria.key?('condenser_type') || search_criteria['condenser_type'].nil?
-            if !search_criteria.key?('absorption_type') || search_criteria['absorption_type'].nil?
-              check_elems <<  OpenStudio::Attribute.new('flag', "Can't find unique search criteria for #{component.name}. #{search_criteria}")
-              next # don't go past here
-            end
-          end
-        elsif search_criteria['cooling_type'] == 'WaterCooled'
-          chiller_air_cooled_condenser_types.each do |compressor_type|
-            if component.name.to_s.include?(compressor_type)
-              search_criteria['compressor_type'] = compressor_type
-              next
-            end
-          end
-          # if no match and also no absorption_type then issue warning
-          if !search_criteria.key?('compressor_type') || search_criteria['compressor_type'].nil?
-            if !search_criteria.key?('absorption_type') || search_criteria['absorption_type'].nil?
-              check_elems <<  OpenStudio::Attribute.new('flag', "Can't find unique search criteria for #{component.name}. #{search_criteria}")
-              next # don't go past here
-            end
-          end
-        end
-
-        # lookup chiller
-        if use_old_gem_code
-          capacity_w = component.find_capacity
-        else
-          capacity_w = std.chiller_electric_eir_find_capacity(component)
-        end
-        capacity_tons = OpenStudio.convert(capacity_w, 'W', 'ton').get
-
-        if use_old_gem_code
-          chlr_props = component.model.find_object($os_standards['chillers'], search_criteria, capacity_tons, Date.today)
-          chlr_props
-          chlr_props = std.model_find_object(std.standards_data['chillers'], search_criteria, capacity_tons, Date.today)
-        end
-        if chlr_props.nil?
-          check_elems <<  OpenStudio::Attribute.new('flag', "Didn't find chiller for #{component.name}. #{search_criteria}")
-          next # don't go past here in loop if can't find curve
-        end
-
-        # temp model to hold temp curve
-        model_temp = OpenStudio::Model::Model.new
-
-        # create temp curve
-        target_curve_name = chlr_props['eirfplr']
-        if target_curve_name.nil?
-          check_elems <<  OpenStudio::Attribute.new('flag', "Can't find target eirfplr curve for #{component.name}")
-          next # don't go past here in loop if can't find curve
-        end
-        if use_old_gem_code
-          temp_curve = model_temp.add_curve(target_curve_name)
-        else
-          temp_curve = std.model_add_curve(model_temp, target_curve_name)
-        end
-
-        target_curve_40_pct = temp_curve.evaluate(0.4)
-        target_curve_80_pct = temp_curve.evaluate(0.8)
-
-        # check curve at two points
-        if curve_40_pct < target_curve_40_pct * (1.0 - min_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 40% of #{curve_40_pct.round(2)} for #{component.name} is more than #{min_pass * 100} % below the typical value of #{target_curve_40_pct.round(2)} for #{display_standard}.")
-        elsif curve_40_pct > target_curve_40_pct * (1.0 + max_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 40% of #{curve_40_pct.round(2)} for #{component.name} is more than #{max_pass * 100} % above the typical value of #{target_curve_40_pct.round(2)} for #{display_standard}.")
-        end
-        if curve_80_pct < target_curve_80_pct * (1.0 - min_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 80% of #{curve_80_pct.round(2)} for #{component.name} is more than #{min_pass * 100} % below the typical value of #{target_curve_80_pct.round(2)} for #{display_standard}.")
-        elsif curve_80_pct > target_curve_80_pct * (1.0 + max_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 80% of #{curve_80_pct.round(2)} for #{component.name} is more than #{max_pass * 100} % above the typical value of #{target_curve_80_pct.round(2)} for #{display_standard}.")
-        end
-      end
-
-      # check getCoilCoolingDXSingleSpeeds objects (will also have curve check in different script)
-      @model.getCoilCoolingDXSingleSpeeds.each do |component|
-        # get curve and evaluate
-        eir_function_of_flow_fraction_curve = component.energyInputRatioFunctionOfFlowFractionCurve
-        curve_40_pct = eir_function_of_flow_fraction_curve.evaluate(0.4)
-        curve_80_pct = eir_function_of_flow_fraction_curve.evaluate(0.8)
-
-        # find ac properties
-        if use_old_gem_code
-          search_criteria = component.find_search_criteria(target_standard)
-        else
-          search_criteria = std.coil_dx_find_search_criteria(component)
-        end
-
-        if use_old_gem_code
-          capacity_w = component.find_capacity
-        else
-          capacity_w = std.coil_cooling_dx_single_speed_find_capacity(component)
-        end
-        capacity_btu_per_hr = OpenStudio.convert(capacity_w, 'W', 'Btu/hr').get
-
-        if use_old_gem_code
-          if component.heat_pump?
-            ac_props = component.model.find_object($os_standards['heat_pumps'], search_criteria, capacity_btu_per_hr, Date.today)
-          else
-            ac_props = component.model.find_object($os_standards['unitary_acs'], search_criteria, capacity_btu_per_hr, Date.today)
-          end
-        else
-          if std.coil_dx_heat_pump?(component)
-            ac_props = std.model_find_object(std.standards_data['heat_pumps'], search_criteria, capacity_btu_per_hr, Date.today)
-          else
-            ac_props = std.model_find_object(std.standards_data['unitary_acs'], search_criteria, capacity_btu_per_hr, Date.today)
-          end
-        end
-
-        # temp model to hold temp curve
-        model_temp = OpenStudio::Model::Model.new
-
-        # create temp curve
-        target_curve_name = ac_props['cool_eir_fflow']
-        if target_curve_name.nil?
-          check_elems <<  OpenStudio::Attribute.new('flag', "Can't find target cool_eir_fflow curve for #{component.name}")
-          next # don't go past here in loop if can't find curve
-        end
-        if use_old_gem_code
-          temp_curve = model_temp.add_curve(target_curve_name)
-        else
-          temp_curve = std.model_add_curve(model_temp, target_curve_name)
-        end
-        target_curve_40_pct = temp_curve.evaluate(0.4)
-        target_curve_80_pct = temp_curve.evaluate(0.8)
-
-        # check curve at two points
-        if curve_40_pct < target_curve_40_pct * (1.0 - min_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 40% of #{curve_40_pct.round(2)} for #{component.name} is more than #{min_pass * 100} % below the typical value of #{target_curve_40_pct.round(2)} for #{display_standard}.")
-        elsif curve_40_pct > target_curve_40_pct * (1.0 + max_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 40% of #{curve_40_pct.round(2)} for #{component.name} is more than #{max_pass * 100} % above the typical value of #{target_curve_40_pct.round(2)} for #{display_standard}.")
-        end
-        if curve_80_pct < target_curve_80_pct * (1.0 - min_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 80% of #{curve_80_pct.round(2)} for #{component.name} is more than #{min_pass * 100} % below the typical value of #{target_curve_80_pct.round(2)} for #{display_standard}.")
-        elsif curve_80_pct > target_curve_80_pct * (1.0 + max_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 80% of #{curve_80_pct.round(2)} for #{component.name} is more than #{max_pass * 100} % above the typical value of #{target_curve_80_pct.round(2)} for #{display_standard}.")
-        end
-      end
-
-      # check CoilCoolingDXTwoSpeed objects (will also have curve check in different script)
-      @model.getCoilCoolingDXTwoSpeeds.each do |component|
-        # get curve and evaluate
-        eir_function_of_flow_fraction_curve = component.energyInputRatioFunctionOfFlowFractionCurve
-        curve_40_pct = eir_function_of_flow_fraction_curve.evaluate(0.4)
-        curve_80_pct = eir_function_of_flow_fraction_curve.evaluate(0.8)
-
-        # find ac properties
-        if use_old_gem_code
-          search_criteria = component.find_search_criteria(target_standard)
-        else
-          search_criteria = std.coil_dx_find_search_criteria(component)
-        end
-
-        if use_old_gem_code
-          capacity_w = component.find_capacity
-        else
-          capacity_w = std.coil_cooling_dx_two_speed_find_capacity(component)
-        end
-        capacity_btu_per_hr = OpenStudio.convert(capacity_w, 'W', 'Btu/hr').get
-
-        if use_old_gem_code
-          ac_props = component.model.find_object($os_standards['unitary_acs'], search_criteria, capacity_btu_per_hr, Date.today)
-        else
-          ac_props = std.model_find_object(std.standards_data['unitary_acs'], search_criteria, capacity_btu_per_hr, Date.today)
-        end
-
-        # temp model to hold temp curve
-        model_temp = OpenStudio::Model::Model.new
-
-        # create temp curve
-        target_curve_name = ac_props['cool_eir_fflow']
-        if target_curve_name.nil?
-          check_elems <<  OpenStudio::Attribute.new('flag', "Can't find target cool_eir_flow curve for #{component.name}")
-          next # don't go past here in loop if can't find curve
-        end
-        if use_old_gem_code
-          temp_curve = model_temp.add_curve(target_curve_name)
-        else
-          temp_curve = std.model_add_curve(model_temp, target_curve_name)
-        end
-        target_curve_40_pct = temp_curve.evaluate(0.4)
-        target_curve_80_pct = temp_curve.evaluate(0.8)
-
-        # check curve at two points
-        if curve_40_pct < target_curve_40_pct * (1.0 - min_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 40% of #{curve_40_pct.round(2)} for #{component.name} is more than #{min_pass * 100} % below the typical value of #{target_curve_40_pct.round(2)} for #{display_standard}.")
-        elsif curve_40_pct > target_curve_40_pct * (1.0 + max_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 40% of #{curve_40_pct.round(2)} for #{component.name} is more than #{max_pass * 100} % above the typical value of #{target_curve_40_pct.round(2)} for #{display_standard}.")
-        end
-        if curve_80_pct < target_curve_80_pct * (1.0 - min_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 80% of #{curve_80_pct.round(2)} for #{component.name} is more than #{min_pass * 100} % below the typical value of #{target_curve_80_pct.round(2)} for #{display_standard}.")
-        elsif curve_80_pct > target_curve_80_pct * (1.0 + max_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 80% of #{curve_80_pct.round(2)} for #{component.name} is more than #{max_pass * 100} % above the typical value of #{target_curve_80_pct.round(2)} for #{display_standard}.")
-        end
-      end
-
-      # check CoilCoolingDXTwoSpeed objects (will also have curve check in different script)
-      @model.getCoilHeatingDXSingleSpeeds.each do |component|
-        # get curve and evaluate
-        eir_function_of_flow_fraction_curve = component.energyInputRatioFunctionofFlowFractionCurve # why lowercase of here but not in CoilCoolingDX objects
-        curve_40_pct = eir_function_of_flow_fraction_curve.evaluate(0.4)
-        curve_80_pct = eir_function_of_flow_fraction_curve.evaluate(0.8)
-
-        # find ac properties
-        if use_old_gem_code
-          search_criteria = component.find_search_criteria(target_standard)
-        else
-          search_criteria = std.coil_dx_find_search_criteria(component)
-        end
-
-        if use_old_gem_code
-          capacity_w = component.find_capacity
-        else
-          capacity_w = std.coil_heating_dx_single_speed_find_capacity(component)
-        end
-        capacity_btu_per_hr = OpenStudio.convert(capacity_w, 'W', 'Btu/hr').get
-
-        if use_old_gem_code
-          ac_props = component.model.find_object($os_standards['heat_pumps_heating'], search_criteria, capacity_btu_per_hr, Date.today)
-        else
-          ac_props = std.model_find_object(std.standards_data['heat_pumps_heating'], search_criteria, capacity_btu_per_hr, Date.today)
-        end
-        if ac_props.nil?
-          target_curve_name = nil
-        else
-          target_curve_name = ac_props['heat_eir_fflow']
-        end
-
-        # temp model to hold temp curve
-        model_temp = OpenStudio::Model::Model.new
-
-        # create temp curve
-        if target_curve_name.nil?
-          check_elems <<  OpenStudio::Attribute.new('flag', "Can't find target curve for #{component.name}")
-          next # don't go past here in loop if can't find curve
-        end
-        if use_old_gem_code
-          temp_curve = model_temp.add_curve(target_curve_name)
-        else
-          temp_curve = std.model_add_curve(model_temp, target_curve_name)
-        end
-
-        # Ensure that the curve was found in standards before attempting to evaluate
-        if temp_curve.nil?
-          check_elems << OpenStudio::Attribute.new('flag', "Can't find coefficients of curve called #{target_curve_name} for #{component.name}, cannot check part-load performance.")
-          next
-        end
-
-        target_curve_40_pct = temp_curve.evaluate(0.4)
-        target_curve_80_pct = temp_curve.evaluate(0.8)
-
-        # check curve at two points
-        if curve_40_pct < target_curve_40_pct * (1.0 - min_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 40% of #{curve_40_pct.round(2)} for #{component.name} is more than #{min_pass * 100} % below the typical value of #{target_curve_40_pct.round(2)} for #{display_standard}.")
-        elsif curve_40_pct > target_curve_40_pct * (1.0 + max_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 40% of #{curve_40_pct.round(2)} for #{component.name} is more than #{max_pass * 100} % above the typical value of #{target_curve_40_pct.round(2)} for #{display_standard}.")
-        end
-        if curve_80_pct < target_curve_80_pct * (1.0 - min_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 80% of #{curve_80_pct.round(2)} for #{component.name} is more than #{min_pass * 100} % below the typical value of #{target_curve_80_pct.round(2)} for #{display_standard}.")
-        elsif curve_80_pct > target_curve_80_pct * (1.0 + max_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 80% of #{curve_80_pct.round(2)} for #{component.name} is more than #{max_pass * 100} % above the typical value of #{target_curve_80_pct.round(2)} for #{display_standard}.")
-        end
-      end
-
-      # check
-      @model.getFanVariableVolumes.each do |component|
-        # skip if not on multi-zone system.
-        if component.airLoopHVAC.is_initialized
-          airloop = component.airLoopHVAC.get
-
-          next unless airloop.thermalZones.size > 1.0
-        end
-
-        # skip of brake horsepower is 0
-        if use_old_gem_code
-          next if component.brake_horsepower == 0.0
-        else
-          next if std.fan_brake_horsepower(component) == 0.0
-        end
-
-        # temp model for use by temp model and target curve
-        model_temp = OpenStudio::Model::Model.new
-
-        # get coeficents for fan
-        model_fan_coefs = []
-        model_fan_coefs << component.fanPowerCoefficient1.get
-        model_fan_coefs << component.fanPowerCoefficient2.get
-        model_fan_coefs << component.fanPowerCoefficient3.get
-        model_fan_coefs << component.fanPowerCoefficient4.get
-        model_fan_coefs << component.fanPowerCoefficient5.get
-
-        # make model curve
-        model_curve = OpenStudio::Model::CurveQuartic.new(model_temp)
-        model_curve.setCoefficient1Constant(model_fan_coefs[0])
-        model_curve.setCoefficient2x(model_fan_coefs[1])
-        model_curve.setCoefficient3xPOW2(model_fan_coefs[2])
-        model_curve.setCoefficient4xPOW3(model_fan_coefs[3])
-        model_curve.setCoefficient5xPOW4(model_fan_coefs[4])
-        curve_40_pct = model_curve.evaluate(0.4)
-        curve_80_pct = model_curve.evaluate(0.8)
-
-        # get target coefs
-        target_fan = OpenStudio::Model::FanVariableVolume.new(model_temp)
-        if use_old_gem_code
-          target_fan.set_control_type('Multi Zone VAV with Static Pressure Reset')
-        else
-          std.fan_variable_volume_set_control_type(target_fan, 'Multi Zone VAV with VSD and Static Pressure Reset')
-        end
-
-        # get coeficents for fan
-        target_fan_coefs = []
-        target_fan_coefs << target_fan.fanPowerCoefficient1.get
-        target_fan_coefs << target_fan.fanPowerCoefficient2.get
-        target_fan_coefs << target_fan.fanPowerCoefficient3.get
-        target_fan_coefs << target_fan.fanPowerCoefficient4.get
-        target_fan_coefs << target_fan.fanPowerCoefficient5.get
-
-        # make model curve
-        target_curve = OpenStudio::Model::CurveQuartic.new(model_temp)
-        target_curve.setCoefficient1Constant(target_fan_coefs[0])
-        target_curve.setCoefficient2x(target_fan_coefs[1])
-        target_curve.setCoefficient3xPOW2(target_fan_coefs[2])
-        target_curve.setCoefficient4xPOW3(target_fan_coefs[3])
-        target_curve.setCoefficient5xPOW4(target_fan_coefs[4])
-        target_curve_40_pct = target_curve.evaluate(0.4)
-        target_curve_80_pct = target_curve.evaluate(0.8)
-
-        # check curve at two points
-        if curve_40_pct < target_curve_40_pct * (1.0 - min_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 40% of #{curve_40_pct.round(2)} for #{component.name} is more than #{min_pass * 100} % below the typical value of #{target_curve_40_pct.round(2)} for #{display_standard}.")
-        elsif curve_40_pct > target_curve_40_pct * (1.0 + max_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 40% of #{curve_40_pct.round(2)} for #{component.name} is more than #{max_pass * 100} % above the typical value of #{target_curve_40_pct.round(2)} for #{display_standard}.")
-        end
-        if curve_80_pct < target_curve_80_pct * (1.0 - min_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 80% of #{curve_80_pct.round(2)} for #{component.name} is more than #{min_pass * 100} % below the typical value of #{target_curve_80_pct.round(2)} for #{display_standard}.")
-        elsif curve_80_pct > target_curve_80_pct * (1.0 + max_pass)
-          check_elems <<  OpenStudio::Attribute.new('flag', "The curve value at 80% of #{curve_80_pct.round(2)} for #{component.name} is more than #{max_pass * 100} % above the typical value of #{target_curve_80_pct.round(2)} for #{display_standard}.")
-        end
-      end
-    rescue StandardError => e
-      # brief description of ruby error
-      check_elems << OpenStudio::Attribute.new('flag', "Error prevented QAQC check from running (#{e}).")
-
-      # backtrace of ruby error for diagnostic use
-      if @error_backtrace then check_elems << OpenStudio::Attribute.new('flag', e.backtrace.join("\n").to_s) end
-    end
-
-    # add check_elms to new attribute
-    check_elem = OpenStudio::Attribute.new('check', check_elems)
-
-    return check_elem
-    # note: registerWarning and registerValue will be added for checks downstream using os_lib_reporting_qaqc.rb
-  end
-end

data/lib/openstudio/extension/core/check_mech_sys_type.rb

@@ -1,109 +0,0 @@
-# *******************************************************************************
-# OpenStudio(R), Copyright (c) Alliance for Sustainable Energy, LLC.
-# See also https://openstudio.net/license
-# *******************************************************************************
-
-module OsLib_QAQC
-  # include any general notes about QAQC method here
-
-  # checks the number of unmet hours in the model
-  def check_mech_sys_type(category, target_standard, name_only = false)
-    # summary of the check
-    check_elems = OpenStudio::AttributeVector.new
-    check_elems << OpenStudio::Attribute.new('name', 'Mechanical System Type')
-    check_elems << OpenStudio::Attribute.new('category', category)
-
-    # add ASHRAE to display of target standard if includes with 90.1
-    if target_standard.include?('90.1 2013')
-      check_elems << OpenStudio::Attribute.new('description', 'Check against ASHRAE 90.1 2013 Tables G3.1.1 A-B. Infers the baseline system type based on the equipment serving the zone and their heating/cooling fuels. Only does a high-level inference; does not look for the presence/absence of required controls, etc.')
-    else
-      check_elems << OpenStudio::Attribute.new('description', 'Check against ASHRAE 90.1. Infers the baseline system type based on the equipment serving the zone and their heating/cooling fuels. Only does a high-level inference; does not look for the presence/absence of required controls, etc.')
-    end
-
-    # stop here if only name is requested this is used to populate display name for arguments
-    if name_only == true
-      results = []
-      check_elems.each do |elem|
-        results << elem.valueAsString
-      end
-      return results
-    end
-
-    # Versions of OpenStudio greater than 2.4.0 use a modified version of
-    # openstudio-standards with different method calls.  These methods
-    # require a "Standard" object instead of the standard being passed into method calls.
-    # This Standard object is used throughout the QAQC check.
-    if OpenStudio::VersionString.new(OpenStudio.openStudioVersion) < OpenStudio::VersionString.new('2.4.3')
-      use_old_gem_code = true
-    else
-      use_old_gem_code = false
-      std = Standard.build(target_standard)
-    end
-
-    begin
-      # Get the actual system type for all zones in the model
-      act_zone_to_sys_type = {}
-      @model.getThermalZones.each do |zone|
-        if use_old_gem_code
-          act_zone_to_sys_type[zone] = zone.infer_system_type
-        else
-          act_zone_to_sys_type[zone] = std.thermal_zone_infer_system_type(zone)
-        end
-      end
-
-      # Get the baseline system type for all zones in the model
-      if use_old_gem_code
-        climate_zone = @model.get_building_climate_zone_and_building_type['climate_zone']
-      else
-        climate_zone = std.model_get_building_properties(@model)['climate_zone']
-      end
-
-      if use_old_gem_code
-        req_zone_to_sys_type = @model.get_baseline_system_type_by_zone(target_standard, climate_zone)
-      else
-        req_zone_to_sys_type = std.model_get_baseline_system_type_by_zone(@model, climate_zone)
-      end
-
-      # Compare the actual to the correct
-      @model.getThermalZones.each do |zone|
-        # TODO: - skip if plenum
-        is_plenum = false
-        zone.spaces.each do |space|
-          if use_old_gem_code
-            if space.plenum?
-              is_plenum = true
-            end
-          else
-            if std.space_plenum?(space)
-              is_plenum = true
-            end
-          end
-        end
-        next if is_plenum
-
-        req_sys_type = req_zone_to_sys_type[zone]
-        act_sys_type = act_zone_to_sys_type[zone]
-
-        if act_sys_type == req_sys_type
-          puts "#{zone.name} system type = #{act_sys_type}"
-        else
-          if req_sys_type == '' then req_sys_type = 'Unknown' end
-          puts "#{zone.name} baseline system type is incorrect. Supposed to be #{req_sys_type}, but was #{act_sys_type} instead."
-          check_elems << OpenStudio::Attribute.new('flag', "#{zone.name} baseline system type is incorrect. Supposed to be #{req_sys_type}, but was #{act_sys_type} instead.")
-        end
-      end
-    rescue StandardError => e
-      # brief description of ruby error
-      check_elems << OpenStudio::Attribute.new('flag', "Error prevented QAQC check from running (#{e}).")
-
-      # backtrace of ruby error for diagnostic use
-      if @error_backtrace then check_elems << OpenStudio::Attribute.new('flag', e.backtrace.join("\n").to_s) end
-    end
-
-    # add check_elms to new attribute
-    check_elem = OpenStudio::Attribute.new('check', check_elems)
-
-    return check_elem
-    # note: registerWarning and registerValue will be added for checks downstream using os_lib_reporting_qaqc.rb
-  end
-end