openstudio-common-measures 0.3.0 → 0.5.0

data/lib/measures/IncreaseInsulationRValueForRoofs/measure.rb

@@ -1,422 +0,0 @@
-# *******************************************************************************
-# OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC.
-# All rights reserved.
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#
-# (1) Redistributions of source code must retain the above copyright notice,
-# this list of conditions and the following disclaimer.
-#
-# (2) Redistributions in binary form must reproduce the above copyright notice,
-# this list of conditions and the following disclaimer in the documentation
-# and/or other materials provided with the distribution.
-#
-# (3) Neither the name of the copyright holder nor the names of any contributors
-# may be used to endorse or promote products derived from this software without
-# specific prior written permission from the respective party.
-#
-# (4) Other than as required in clauses (1) and (2), distributions in any form
-# of modifications or other derivative works may not use the "OpenStudio"
-# trademark, "OS", "os", or any other confusingly similar designation without
-# specific prior written permission from Alliance for Sustainable Energy, LLC.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND ANY CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER(S), ANY CONTRIBUTORS, THE
-# UNITED STATES GOVERNMENT, OR THE UNITED STATES DEPARTMENT OF ENERGY, NOR ANY OF
-# THEIR EMPLOYEES, BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
-# OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# *******************************************************************************
-
-# start the measure
-class IncreaseInsulationRValueForRoofs < OpenStudio::Measure::ModelMeasure
-  # define the name that a user will see
-  def name
-    return 'Increase R-value of Insulation for Roofs to a Specific Value'
-  end
-
-  # define the arguments that the user will input
-  def arguments(model)
-    args = OpenStudio::Measure::OSArgumentVector.new
-
-    # make an argument insulation R-value
-    r_value = OpenStudio::Measure::OSArgument.makeDoubleArgument('r_value', true)
-    r_value.setDisplayName('Insulation R-value (ft^2*h*R/Btu).')
-    r_value.setDefaultValue(30.0)
-    args << r_value
-
-    # make bool argument to allow both increase and decrease in R value
-    allow_reduction = OpenStudio::Measure::OSArgument.makeBoolArgument('allow_reduction', true)
-    allow_reduction.setDisplayName('Allow both increase and decrease in R-value to reach requested target?')
-    allow_reduction.setDefaultValue(false)
-    args << allow_reduction
-
-    # make an argument for material and installation cost
-    material_cost_increase_ip = OpenStudio::Measure::OSArgument.makeDoubleArgument('material_cost_increase_ip', true)
-    material_cost_increase_ip.setDisplayName('Increase in Material and Installation Costs for Construction per Area Used ($/ft^2).')
-    material_cost_increase_ip.setDefaultValue(0.0)
-    args << material_cost_increase_ip
-
-    # make an argument for demolition cost
-    one_time_retrofit_cost_ip = OpenStudio::Measure::OSArgument.makeDoubleArgument('one_time_retrofit_cost_ip', true)
-    one_time_retrofit_cost_ip.setDisplayName('One Time Retrofit Cost to Add Insulation to Construction ($/ft^2).')
-    one_time_retrofit_cost_ip.setDefaultValue(0.0)
-    args << one_time_retrofit_cost_ip
-
-    # make an argument for duration in years until costs start
-    years_until_retrofit_cost = OpenStudio::Measure::OSArgument.makeIntegerArgument('years_until_retrofit_cost', true)
-    years_until_retrofit_cost.setDisplayName('Year to Incur One Time Retrofit Cost (whole years).')
-    years_until_retrofit_cost.setDefaultValue(0)
-    args << years_until_retrofit_cost
-
-    return args
-  end
-
-  # define what happens when the measure is run
-  def run(model, runner, user_arguments)
-    super(model, runner, user_arguments)
-
-    # use the built-in error checking
-    if !runner.validateUserArguments(arguments(model), user_arguments)
-      return false
-    end
-
-    # assign the user inputs to variables
-    r_value = runner.getDoubleArgumentValue('r_value', user_arguments)
-    allow_reduction = runner.getBoolArgumentValue('allow_reduction', user_arguments)
-    material_cost_increase_ip = runner.getDoubleArgumentValue('material_cost_increase_ip', user_arguments)
-    one_time_retrofit_cost_ip = runner.getDoubleArgumentValue('one_time_retrofit_cost_ip', user_arguments)
-    years_until_retrofit_cost = runner.getIntegerArgumentValue('years_until_retrofit_cost', user_arguments)
-
-    # set limit for minimum insulation. This is used to limit input and for inferring insulation layer in construction.
-    min_expected_r_value_ip = 1 # ip units
-
-    # check the R-value for reasonableness
-    if (r_value < 0) || (r_value > 500)
-      runner.registerError("The requested roof insulation R-value of #{r_value} ft^2*h*R/Btu was above the measure limit.")
-      return false
-    elsif r_value > 60
-      runner.registerWarning("The requested roof insulation R-value of #{r_value} ft^2*h*R/Btu is abnormally high.")
-    elsif r_value < min_expected_r_value_ip
-      runner.registerWarning("The requested roof insulation R-value of #{r_value} ft^2*h*R/Btu is abnormally low.")
-    end
-
-    # check lifecycle arguments for reasonableness
-    if (years_until_retrofit_cost < 0) && (years_until_retrofit_cost > 100)
-      runner.registerError('Year to incur one time retrofit cost should be a non-negative integer less than or equal to 100.')
-    end
-
-    # short def to make numbers pretty (converts 4125001.25641 to 4,125,001.26 or 4,125,001). The definition be called through this measure
-    def neat_numbers(number, roundto = 2) # round to 0 or 2)
-      if roundto == 2
-        number = format '%.2f', number
-      else
-        number = number.round
-      end
-      # regex to add commas
-      number.to_s.reverse.gsub(/([0-9]{3}(?=([0-9])))/, '\\1,').reverse
-    end
-
-    # helper to make it easier to do unit conversions on the fly
-    def unit_helper(number, from_unit_string, to_unit_string)
-      converted_number = OpenStudio.convert(OpenStudio::Quantity.new(number, OpenStudio.createUnit(from_unit_string).get), OpenStudio.createUnit(to_unit_string).get).get.value
-    end
-
-    # convert r_value and material_cost to si for future use
-    r_value_si = unit_helper(r_value, 'ft^2*h*R/Btu', 'm^2*K/W')
-    material_cost_increase_si = unit_helper(material_cost_increase_ip, '1/ft^2', '1/m^2')
-
-    # create an array of roofs and find range of starting construction R-value (not just insulation layer)
-    surfaces = model.getSurfaces
-    exterior_surfaces = []
-    exterior_surface_constructions = []
-    exterior_surface_construction_names = []
-    roof_resistance = []
-    surfaces.each do |surface|
-      if (surface.outsideBoundaryCondition == 'Outdoors') && (surface.surfaceType == 'RoofCeiling')
-        exterior_surfaces << surface
-        roof_const = surface.construction.get
-        # only add construction if it hasn't been added yet
-        if !exterior_surface_construction_names.include?(roof_const.name.to_s)
-          exterior_surface_constructions << roof_const.to_Construction.get
-        end
-        exterior_surface_construction_names << roof_const.name.to_s
-        roof_resistance << 1 / roof_const.thermalConductance.to_f
-      end
-    end
-
-    # nothing will be done if there are no exterior surfaces
-    if exterior_surfaces.empty?
-      runner.registerAsNotApplicable('Model does not have any roofs.')
-      return true
-    end
-
-    # report strings for initial condition
-    initial_string = []
-    exterior_surface_constructions.uniq.each do |exterior_surface_construction|
-      # unit conversion of roof insulation from SI units (M^2*K/W) to IP units (ft^2*h*R/Btu)
-      initial_conductance_ip = unit_helper(1 / exterior_surface_construction.thermalConductance.to_f, 'm^2*K/W', 'ft^2*h*R/Btu')
-      initial_string << "#{exterior_surface_construction.name} (R-#{(format '%.1f', initial_conductance_ip)})"
-    end
-    runner.registerInitialCondition("The building had #{initial_string.size} roof constructions: #{initial_string.sort.join(', ')}.")
-
-    # hashes to track constructions and materials made by the measure, to avoid duplicates
-    constructions_hash_old_new = {}
-    constructions_hash_new_old = {} # used to get netArea of new construction and then cost objects of construction it replaced
-    materials_hash = {}
-
-    # array and counter for new constructions that are made, used for reporting final condition
-    final_constructions_array = []
-
-    # loop through all constructions and materials used on roofs, edit and clone
-    exterior_surface_constructions.each do |exterior_surface_construction|
-      construction_layers = exterior_surface_construction.layers
-      max_thermal_resistance_material = ''
-      max_thermal_resistance_material_index = ''
-      materials_in_construction = construction_layers.map.with_index do |layer, i|
-        { 'name' => layer.name.to_s,
-          'index' => i,
-          'nomass' => !layer.to_MasslessOpaqueMaterial.empty?,
-          'r_value' => layer.to_OpaqueMaterial.get.thermalResistance,
-          'mat' => layer }
-      end
-
-      no_mass_materials = materials_in_construction.select { |mat| mat['nomass'] == true }
-      # measure will select the no mass material with the highest r-value as the insulation layer
-      # if no mass materials are present, the measure will select the material with the highest r-value per inch
-      if !no_mass_materials.empty?
-        thermal_resistance_values = no_mass_materials.map { |mat| mat['r_value'] }
-        max_mat_hash = no_mass_materials.select { |mat| mat['r_value'] >= thermal_resistance_values.max }
-      else
-        thermal_resistance_per_thickness_values = materials_in_construction.map { |mat| mat['r_value'] / mat['mat'].thickness }
-        target_index = thermal_resistance_per_thickness_values.index(thermal_resistance_per_thickness_values.max)
-        max_mat_hash = materials_in_construction.select { |mat| mat['index'] == target_index }
-        thermal_resistance_values = materials_in_construction.map { |mat| mat['r_value'] }
-      end
-      max_thermal_resistance_material = max_mat_hash[0]['mat']
-      max_thermal_resistance_material_index = max_mat_hash[0]['index']
-      max_thermal_resistance = max_thermal_resistance_material.to_OpaqueMaterial.get.thermalResistance
-
-      if max_thermal_resistance <= unit_helper(min_expected_r_value_ip, 'ft^2*h*R/Btu', 'm^2*K/W')
-        runner.registerWarning("Construction '#{exterior_surface_construction.name}' does not appear to have an insulation layer and was not altered.")
-      elsif (max_thermal_resistance >= r_value_si) && !allow_reduction
-        runner.registerInfo("The insulation layer of construction #{exterior_surface_construction.name} exceeds the requested R-Value. It was not altered.")
-      else
-        # clone the construction
-        final_construction = exterior_surface_construction.clone(model)
-        final_construction = final_construction.to_Construction.get
-        final_construction.setName("#{exterior_surface_construction.name} adj roof insulation")
-        final_constructions_array << final_construction
-
-        # loop through lifecycle costs getting total costs under "Construction" or "Salvage" category and add to counter if occurs during year 0
-        const_LCCs = final_construction.lifeCycleCosts
-        cost_added = false
-        const_LCC_cat_const = false
-        updated_cost_si = 0
-        const_LCCs.each do |const_LCC|
-          if (const_LCC.category == 'Construction') && (material_cost_increase_si != 0)
-            const_LCC_cat_const = true # need this test to add proper lcc if it didn't exist to start with
-            # if multiple LCC objects associated with construction only adjust the cost of one of them.
-            if !cost_added
-              const_LCC.setCost(const_LCC.cost + material_cost_increase_si)
-            else
-              runner.registerInfo("More than one LifeCycleCost object with a category of Construction was associated with #{final_construction.name}. Cost was only adjusted for one of the LifeCycleCost objects.")
-            end
-            updated_cost_si += const_LCC.cost
-          end
-        end
-
-        if cost_added
-          runner.registerInfo("Adjusting material and installation cost for #{final_construction.name} to #{neat_numbers(unit_helper(updated_cost_si, '1/m^2', '1/ft^2'))} ($/ft^2).")
-        end
-
-        # add construction object if it didnt exist to start with and a cost increase was requested
-        if (const_LCC_cat_const == false) && (material_cost_increase_si != 0)
-          lcc_for_uncosted_const = OpenStudio::Model::LifeCycleCost.createLifeCycleCost('LCC_increase_insulation', final_construction, material_cost_increase_si, 'CostPerArea', 'Construction', 20, 0).get
-          runner.registerInfo("No material or installation costs existed for #{final_construction.name}. Created a new LifeCycleCost object with a material and installation cost of #{neat_numbers(unit_helper(lcc_for_uncosted_const.cost, '1/m^2', '1/ft^2'))} ($/ft^2). Assumed capitol cost in first year, an expected life of 20 years, and no O & M costs.")
-        end
-
-        # add one time cost if requested
-        if one_time_retrofit_cost_ip > 0
-          one_time_retrofit_cost_si = unit_helper(one_time_retrofit_cost_ip, '1/ft^2', '1/m^2')
-          lcc_retrofit_specific = OpenStudio::Model::LifeCycleCost.createLifeCycleCost('LCC_retrofit_specific', final_construction, one_time_retrofit_cost_si, 'CostPerArea', 'Construction', 0, years_until_retrofit_cost).get # using 0 for repeat period since one time cost.
-          runner.registerInfo("Adding one time cost of #{neat_numbers(unit_helper(lcc_retrofit_specific.cost, '1/m^2', '1/ft^2'))} ($/ft^2) related to retrofit of roof insulation.")
-        end
-
-        # push to hashes
-        constructions_hash_old_new[exterior_surface_construction.name.to_s] = final_construction
-        constructions_hash_new_old[final_construction] = exterior_surface_construction # push the object to hash key vs. name
-
-        # find already cloned insulation material and link to construction
-        target_material = max_thermal_resistance_material
-        found_material = false
-        materials_hash.each do |orig, new|
-          if target_material.name.to_s == orig
-            new_material = new
-            materials_hash[max_thermal_resistance_material.name.to_s] = new_material
-            final_construction.eraseLayer(max_thermal_resistance_material_index)
-            final_construction.insertLayer(max_thermal_resistance_material_index, new_material)
-            found_material = true
-          end
-        end
-
-        # clone and edit insulation material and link to construction
-        if found_material == false
-          new_material = max_thermal_resistance_material.clone(model)
-          new_material = new_material.to_OpaqueMaterial.get
-          new_material.setName("#{max_thermal_resistance_material.name}_R-value #{r_value} (ft^2*h*R/Btu)")
-          materials_hash[max_thermal_resistance_material.name.to_s] = new_material
-          final_construction.eraseLayer(max_thermal_resistance_material_index)
-          final_construction.insertLayer(max_thermal_resistance_material_index, new_material)
-          runner.registerInfo("For construction'#{final_construction.name}', material'#{new_material.name}' was altered.")
-
-          # edit insulation material
-          new_material_matt = new_material.to_Material
-          if !new_material_matt.empty?
-            starting_thickness = new_material_matt.get.thickness
-            target_thickness = starting_thickness * r_value_si / thermal_resistance_values.max
-            final_thickness = new_material_matt.get.setThickness(target_thickness)
-          end
-          new_material_massless = new_material.to_MasslessOpaqueMaterial
-          if !new_material_massless.empty?
-            final_thermal_resistance = new_material_massless.get.setThermalResistance(r_value_si)
-          end
-          new_material_airgap = new_material.to_AirGap
-          if !new_material_airgap.empty?
-            final_thermal_resistance = new_material_airgap.get.setThermalResistance(r_value_si)
-          end
-        end
-      end
-    end
-
-    # loop through construction sets used in the model
-    default_construction_sets = model.getDefaultConstructionSets
-    default_construction_sets.each do |default_construction_set|
-      if default_construction_set.directUseCount > 0
-        default_surface_const_set = default_construction_set.defaultExteriorSurfaceConstructions
-        if !default_surface_const_set.empty?
-          starting_construction = default_surface_const_set.get.roofCeilingConstruction
-
-          # creating new default construction set
-          new_default_construction_set = default_construction_set.clone(model)
-          new_default_construction_set = new_default_construction_set.to_DefaultConstructionSet.get
-          new_default_construction_set.setName("#{default_construction_set.name} adj roof insulation")
-
-          # create new surface set and link to construction set
-          new_default_surface_const_set = default_surface_const_set.get.clone(model)
-          new_default_surface_const_set = new_default_surface_const_set.to_DefaultSurfaceConstructions.get
-          new_default_surface_const_set.setName("#{default_surface_const_set.get.name} adj roof insulation")
-          new_default_construction_set.setDefaultExteriorSurfaceConstructions(new_default_surface_const_set)
-
-          # use the hash to find the proper construction and link to new_default_surface_const_set
-          target_const = new_default_surface_const_set.roofCeilingConstruction
-          if !target_const.empty?
-            target_const = target_const.get.name.to_s
-            found_const_flag = false
-            constructions_hash_old_new.each do |orig, new|
-              if target_const == orig
-                final_construction = new
-                new_default_surface_const_set.setRoofCeilingConstruction(final_construction)
-                found_const_flag = true
-              end
-            end
-            if found_const_flag == false # this should never happen but is just an extra test in case something goes wrong with the measure code
-              runner.registerWarning("Measure couldn't find the construction named '#{target_const}' in the exterior surface hash.")
-            end
-          end
-
-          # swap all uses of the old construction set for the new
-          construction_set_sources = default_construction_set.sources
-          construction_set_sources.each do |construction_set_source|
-            building_source = construction_set_source.to_Building
-            # if statement for each type of object than can use a DefaultConstructionSet
-            if !building_source.empty?
-              building_source = building_source.get
-              building_source.setDefaultConstructionSet(new_default_construction_set)
-            end
-            building_story_source = construction_set_source.to_BuildingStory
-            if !building_story_source.empty?
-              building_story_source = building_story_source.get
-              building_story_source.setDefaultConstructionSet(new_default_construction_set)
-            end
-            space_type_source = construction_set_source.to_SpaceType
-            if !space_type_source.empty?
-              space_type_source = space_type_source.get
-              space_type_source.setDefaultConstructionSet(new_default_construction_set)
-            end
-            space_source = construction_set_source.to_Space
-            if !space_source.empty?
-              space_source = space_source.get
-              space_source.setDefaultConstructionSet(new_default_construction_set)
-            end
-          end
-
-        end
-      end
-    end
-
-    # link cloned and edited constructions for surfaces with hard assigned constructions
-    exterior_surfaces.each do |exterior_surface|
-      if !exterior_surface.isConstructionDefaulted && !exterior_surface.construction.empty?
-
-        # use the hash to find the proper construction and link to surface
-        target_const = exterior_surface.construction
-        if !target_const.empty?
-          target_const = target_const.get.name.to_s
-          constructions_hash_old_new.each do |orig, new|
-            if target_const == orig
-              final_construction = new
-              exterior_surface.setConstruction(final_construction)
-            end
-          end
-        end
-
-      end
-    end
-
-    # report strings for final condition
-    final_string = [] # not all exterior roof constructions, but only new ones made. If  roof didn't have insulation and was not altered we don't want to show it
-    affected_area_si = 0
-    totalCost_of_affected_area = 0
-    yr0_capital_totalCosts = 0
-    final_constructions_array.each do |final_construction|
-      # unit conversion of roof insulation from SI units (M^2*K/W) to IP units (ft^2*h*R/Btu)
-      final_conductance_ip = unit_helper(1 / final_construction.thermalConductance.to_f, 'm^2*K/W', 'ft^2*h*R/Btu')
-      final_string << "#{final_construction.name} (R-#{(format '%.1f', final_conductance_ip)})"
-      affected_area_si += final_construction.getNetArea
-
-      # loop through lifecycle costs getting total costs under "Construction" or "Salvage" category and add to counter if occurs during year 0
-      const_LCCs = final_construction.lifeCycleCosts
-      const_LCCs.each do |const_LCC|
-        if (const_LCC.category == 'Construction') || (const_LCC.category == 'Salvage')
-          if const_LCC.yearsFromStart == 0
-            yr0_capital_totalCosts += const_LCC.totalCost
-          end
-        end
-      end
-    end
-
-    # add not applicable test if there were exterior roof constructions but non of them were altered (already enough insulation or doesn't look like insulated wall)
-    if affected_area_si == 0
-      runner.registerAsNotApplicable('No roofs were altered.')
-      return true
-      # affected_area_ip = affected_area_si
-    else
-      # ip construction area for reporting
-      affected_area_ip = unit_helper(affected_area_si, 'm^2', 'ft^2')
-    end
-
-    # report final condition
-    runner.registerFinalCondition("The existing insulation for roofs was changed to R-#{r_value}. This was accomplished for an initial cost of #{one_time_retrofit_cost_ip} ($/sf) and an increase of #{material_cost_increase_ip} ($/sf) for construction. This was applied to #{neat_numbers(affected_area_ip, 0)} (ft^2) across #{final_string.size} roof constructions: #{final_string.sort.join(', ')}.")
-
-    return true
-  end
-end
-
-# this allows the measure to be used by the application
-IncreaseInsulationRValueForRoofs.new.registerWithApplication

data/lib/measures/IncreaseInsulationRValueForRoofs/measure.xml

@@ -1,143 +0,0 @@
-<measure>
-  <schema_version>3.0</schema_version>
-  <name>increase_insulation_r_value_for_roofs</name>
-  <uid>65b798f4-207f-4aed-987a-386c865d0ccd</uid>
-  <version_id>f9eb0028-6f7e-47a8-bf77-b786f4d89dd7</version_id>
-  <version_modified>20200229T024304Z</version_modified>
-  <xml_checksum>0F858D9E</xml_checksum>
-  <class_name>IncreaseInsulationRValueForRoofs</class_name>
-  <display_name>Increase R-value of Insulation for Roofs to a Specific Value</display_name>
-  <description>Set the R-Value of roof insulation to a specified value.  Higher R-Values provide better insulation, lowering heat loss and heat gain through the roof.</description>
-  <modeler_description>Set the R-Value (ft^2*h*R/Btu) of the insulation material layer in all roofs in the model to a specified value.  Find constructions used for roofs, make copies of these and assign them to the appropriate construction sets or surfaces. Identify which layer of the construction is the insulation layer. This could be a Material, No Mass Material, or Air Gap Material. If the Insulation layer is "Material? the thickness will be changed to attain the desired R-Value. If the insulation layer is "No Mass Material? or "Air Gap Material? the Thermal Resistance will be directly entered.  If the construction doesn't appear to have an insulation layer, it will not be altered. Surfaces with "Adiabatic" boundary conditions are not specifically assumed to be interior or exterior. As a result constructions used on "Adiabatic" surfaces will not be altered. Constructions used on attic floors will not be altered.&#xd;&#xd;&#xd;&#xd;&#xd;&#xd;
-&#xd;&#xd;&#xd;&#xd;&#xd;&#xd;
-The resulting construction will retain the cost data from the source construction, however material and installation cost can be increased which will affect replacement cost if it happens during the analysis period. Additionally a one-time cost can be added to reflect any retrofit costs that occur at some point prior to replacement.&#xd;&#xd;&#xd;&#xd;&#xd;&#xd;
-  </modeler_description>
-  <arguments>
-    <argument>
-      <name>r_value</name>
-      <display_name>Insulation R-value (ft^2*h*R/Btu).</display_name>
-      <type>Double</type>
-      <required>true</required>
-      <model_dependent>false</model_dependent>
-      <default_value>30</default_value>
-    </argument>
-    <argument>
-      <name>allow_reduction</name>
-      <display_name>Allow both increase and decrease in R-value to reach requested target?</display_name>
-      <type>Boolean</type>
-      <required>true</required>
-      <model_dependent>false</model_dependent>
-      <default_value>false</default_value>
-      <choices>
-        <choice>
-          <value>true</value>
-          <display_name>true</display_name>
-        </choice>
-        <choice>
-          <value>false</value>
-          <display_name>false</display_name>
-        </choice>
-      </choices>
-    </argument>
-    <argument>
-      <name>material_cost_increase_ip</name>
-      <display_name>Increase in Material and Installation Costs for Construction per Area Used ($/ft^2).</display_name>
-      <type>Double</type>
-      <required>true</required>
-      <model_dependent>false</model_dependent>
-      <default_value>0</default_value>
-    </argument>
-    <argument>
-      <name>one_time_retrofit_cost_ip</name>
-      <display_name>One Time Retrofit Cost to Add Insulation to Construction ($/ft^2).</display_name>
-      <type>Double</type>
-      <required>true</required>
-      <model_dependent>false</model_dependent>
-      <default_value>0</default_value>
-    </argument>
-    <argument>
-      <name>years_until_retrofit_cost</name>
-      <display_name>Year to Incur One Time Retrofit Cost (whole years).</display_name>
-      <type>Integer</type>
-      <required>true</required>
-      <model_dependent>false</model_dependent>
-      <default_value>0</default_value>
-    </argument>
-  </arguments>
-  <outputs/>
-  <provenances/>
-  <tags>
-    <tag>Envelope.Opaque</tag>
-  </tags>
-  <attributes>
-    <attribute>
-      <name>Measure Type</name>
-      <value>ModelMeasure</value>
-      <datatype>string</datatype>
-    </attribute>
-    <attribute>
-      <name>Measure Function</name>
-      <value>Measure</value>
-      <datatype>string</datatype>
-    </attribute>
-    <attribute>
-      <name>Requires EnergyPlus Results</name>
-      <value>false</value>
-      <datatype>boolean</datatype>
-    </attribute>
-    <attribute>
-      <name>Uses SketchUp API</name>
-      <value>false</value>
-      <datatype>boolean</datatype>
-    </attribute>
-  </attributes>
-  <files>
-    <file>
-      <filename>EnvelopeAndLoadTestModel_01.osm</filename>
-      <filetype>osm</filetype>
-      <usage_type>test</usage_type>
-      <checksum>10AA8866</checksum>
-    </file>
-    <file>
-      <filename>ReverseTranslatedModel.osm</filename>
-      <filetype>osm</filetype>
-      <usage_type>test</usage_type>
-      <checksum>0B94403D</checksum>
-    </file>
-    <file>
-      <filename>README.md.erb</filename>
-      <filetype>erb</filetype>
-      <usage_type>readmeerb</usage_type>
-      <checksum>703C9964</checksum>
-    </file>
-    <file>
-      <filename>README.md</filename>
-      <filetype>md</filetype>
-      <usage_type>readme</usage_type>
-      <checksum>62C992A9</checksum>
-    </file>
-    <file>
-      <filename>IncreaseInsulationRValueForRoofs_Test.rb</filename>
-      <filetype>rb</filetype>
-      <usage_type>test</usage_type>
-      <checksum>4021A34F</checksum>
-    </file>
-    <file>
-      <filename>LICENSE.md</filename>
-      <filetype>md</filetype>
-      <usage_type>license</usage_type>
-      <checksum>E0468DD6</checksum>
-    </file>
-    <file>
-      <version>
-        <software_program>OpenStudio</software_program>
-        <identifier>2.0.0</identifier>
-        <min_compatible>2.0.0</min_compatible>
-      </version>
-      <filename>measure.rb</filename>
-      <filetype>rb</filetype>
-      <usage_type>script</usage_type>
-      <checksum>1496AE9B</checksum>
-    </file>
-  </files>
-</measure>

data/lib/measures/IncreaseInsulationRValueForRoofsByPercentage/LICENSE.md

@@ -1,27 +0,0 @@
-OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC. All rights reserved.
-
-Redistribution and use in source and binary forms, with or without modification, are permitted 
-provided that the following conditions are met:
-
-(1) Redistributions of source code must retain the above copyright notice, this list of conditions 
-and the following disclaimer.
-
-(2) Redistributions in binary form must reproduce the above copyright notice, this list of conditions
-and the following disclaimer in the documentation and/or other materials provided with the distribution.
-
-(3) Neither the name of the copyright holder nor the names of any contributors may be used to endorse 
-or promote products derived from this software without specific prior written permission from the 
-respective party.
-
-(4) Other than as required in clauses (1) and (2), distributions in any form of modifications or other 
-derivative works may not use the "OpenStudio" trademark, "OS", "os", or any other confusingly similar 
-designation without specific prior written permission from Alliance for Sustainable Energy, LLC.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED 
-WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
-PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER, THE UNITED STATES GOVERNMENT, 
-OR ANY CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
-OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
-STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

data/lib/measures/IncreaseInsulationRValueForRoofsByPercentage/README.md

@@ -1,32 +0,0 @@
-
-
-###### (Automatically generated documentation)
-
-# Increase R-value of Insulation for Roofs by a Specified Percentage.
-
-## Description
-
-
-## Modeler Description
-
-
-## Measure Type
-ModelMeasure
-
-## Taxonomy
-
-
-## Arguments
-
-
-### Percentage Increase of R-value for Roof Insulation.
-
-**Name:** r_value,
-**Type:** Double,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-
-
-

data/lib/measures/IncreaseInsulationRValueForRoofsByPercentage/README.md.erb

@@ -1,42 +0,0 @@
-<%#= README.md.erb is used to auto-generate README.md. %>
-<%#= To manually maintain README.md throw away README.md.erb and manually edit README.md %>
-###### (Automatically generated documentation)
-
-# <%= name %>
-
-## Description
-<%= description %>
-
-## Modeler Description
-<%= modelerDescription %>
-
-## Measure Type
-<%= measureType %>
-
-## Taxonomy
-<%= taxonomy %>
-
-## Arguments
-
-<% arguments.each do |argument| %>
-### <%= argument[:display_name] %>
-<%= argument[:description] %>
-**Name:** <%= argument[:name] %>,
-**Type:** <%= argument[:type] %>,
-**Units:** <%= argument[:units] %>,
-**Required:** <%= argument[:required] %>,
-**Model Dependent:** <%= argument[:model_dependent] %>
-<% end %>
-
-<% if arguments.size == 0 %>
-<%= "This measure does not have any user arguments" %>
-<% end %>
-
-<% if outputs.size > 0 %>
-## Outputs
-<% output_names = [] %>
-<% outputs.each do |output| %>
-<% output_names << output[:display_name] %>
-<% end %>
-<%= output_names.join(", ") %>
-<% end %>