openstudio-common-measures 0.2.0 → 0.4.0

data/lib/measures/ImproveMotorEfficiency/LICENSE.md

@@ -1,27 +0,0 @@
-OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC. All rights reserved.
-
-Redistribution and use in source and binary forms, with or without modification, are permitted 
-provided that the following conditions are met:
-
-(1) Redistributions of source code must retain the above copyright notice, this list of conditions 
-and the following disclaimer.
-
-(2) Redistributions in binary form must reproduce the above copyright notice, this list of conditions
-and the following disclaimer in the documentation and/or other materials provided with the distribution.
-
-(3) Neither the name of the copyright holder nor the names of any contributors may be used to endorse 
-or promote products derived from this software without specific prior written permission from the 
-respective party.
-
-(4) Other than as required in clauses (1) and (2), distributions in any form of modifications or other 
-derivative works may not use the "OpenStudio" trademark, "OS", "os", or any other confusingly similar 
-designation without specific prior written permission from Alliance for Sustainable Energy, LLC.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED 
-WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
-PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER, THE UNITED STATES GOVERNMENT, 
-OR ANY CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
-OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
-STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

data/lib/measures/ImproveMotorEfficiency/README.md

@@ -1,104 +0,0 @@
-
-
-###### (Automatically generated documentation)
-
-# Improve Motor Efficiency in Selected Fans and Pumps
-
-## Description
-
-
-## Modeler Description
-
-
-## Measure Type
-ModelMeasure
-
-## Taxonomy
-
-
-## Arguments
-
-
-### Choose a Plant or Air Loop to Alter.
-
-**Name:** object,
-**Type:** Choice,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-### Set Motor Efficiency(%).
-
-**Name:** motor_eff,
-**Type:** Double,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-### Remove Baseline Costs From Effected Fans and Pumps?
-
-**Name:** remove_costs,
-**Type:** Boolean,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-### Material and Installation Costs per Motor ($).
-
-**Name:** material_cost,
-**Type:** Double,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-### Demolition Costs per Motor ($).
-
-**Name:** demolition_cost,
-**Type:** Double,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-### Years Until Costs Start (whole years).
-
-**Name:** years_until_costs_start,
-**Type:** Integer,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-### Demolition Costs Occur During Initial Construction?
-
-**Name:** demo_cost_initial_const,
-**Type:** Boolean,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-### Expected Life (whole years).
-
-**Name:** expected_life,
-**Type:** Integer,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-### O & M Costs per Motor ($).
-
-**Name:** om_cost,
-**Type:** Double,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-### O & M Frequency (whole years).
-
-**Name:** om_frequency,
-**Type:** Integer,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-
-
-

data/lib/measures/ImproveMotorEfficiency/README.md.erb

@@ -1,42 +0,0 @@
-<%#= README.md.erb is used to auto-generate README.md. %>
-<%#= To manually maintain README.md throw away README.md.erb and manually edit README.md %>
-###### (Automatically generated documentation)
-
-# <%= name %>
-
-## Description
-<%= description %>
-
-## Modeler Description
-<%= modelerDescription %>
-
-## Measure Type
-<%= measureType %>
-
-## Taxonomy
-<%= taxonomy %>
-
-## Arguments
-
-<% arguments.each do |argument| %>
-### <%= argument[:display_name] %>
-<%= argument[:description] %>
-**Name:** <%= argument[:name] %>,
-**Type:** <%= argument[:type] %>,
-**Units:** <%= argument[:units] %>,
-**Required:** <%= argument[:required] %>,
-**Model Dependent:** <%= argument[:model_dependent] %>
-<% end %>
-
-<% if arguments.size == 0 %>
-<%= "This measure does not have any user arguments" %>
-<% end %>
-
-<% if outputs.size > 0 %>
-## Outputs
-<% output_names = [] %>
-<% outputs.each do |output| %>
-<% output_names << output[:display_name] %>
-<% end %>
-<%= output_names.join(", ") %>
-<% end %>

data/lib/measures/ImproveMotorEfficiency/measure.rb

@@ -1,365 +0,0 @@
-# *******************************************************************************
-# OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC.
-# All rights reserved.
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#
-# (1) Redistributions of source code must retain the above copyright notice,
-# this list of conditions and the following disclaimer.
-#
-# (2) Redistributions in binary form must reproduce the above copyright notice,
-# this list of conditions and the following disclaimer in the documentation
-# and/or other materials provided with the distribution.
-#
-# (3) Neither the name of the copyright holder nor the names of any contributors
-# may be used to endorse or promote products derived from this software without
-# specific prior written permission from the respective party.
-#
-# (4) Other than as required in clauses (1) and (2), distributions in any form
-# of modifications or other derivative works may not use the "OpenStudio"
-# trademark, "OS", "os", or any other confusingly similar designation without
-# specific prior written permission from Alliance for Sustainable Energy, LLC.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND ANY CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER(S), ANY CONTRIBUTORS, THE
-# UNITED STATES GOVERNMENT, OR THE UNITED STATES DEPARTMENT OF ENERGY, NOR ANY OF
-# THEIR EMPLOYEES, BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
-# OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# *******************************************************************************
-
-# start the measure
-class ImproveMotorEfficiency < OpenStudio::Measure::ModelMeasure
-  # define the name that a user will see, this method may be deprecated as
-  # the display name in PAT comes from the name field in measure.xml
-  def name
-    return 'Improve Motor Efficiency in Selected Fans and Pumps'
-  end
-
-  # define the arguments that the user will input
-  def arguments(model)
-    args = OpenStudio::Measure::OSArgumentVector.new
-
-    # populate choice argument for constructions that are applied to surfaces in the model
-    loop_handles = OpenStudio::StringVector.new
-    loop_display_names = OpenStudio::StringVector.new
-
-    # putting loops and names into hash
-    loop_args = model.getLoops
-    loop_args_hash = {}
-    loop_args.each do |loop_arg|
-      loop_args_hash[loop_arg.name.to_s] = loop_arg
-    end
-
-    # looping through sorted hash of air loops
-    loop_args_hash.sort.map do |key, value|
-      show_loop = false
-      components = value.supplyComponents
-      components.each do |component|
-        if !component.to_FanConstantVolume.empty?
-          show_loop = true
-        end
-        if !component.to_FanVariableVolume.empty?
-          show_loop = true
-        end
-        if !component.to_FanOnOff.empty?
-          show_loop = true
-        end
-        if !component.to_PumpConstantSpeed.empty?
-          show_loop = true
-        end
-        if !component.to_PumpVariableSpeed.empty?
-          show_loop = true
-        end
-      end
-
-      # if loop as object of correct type then add to hash.
-      if show_loop == true
-        loop_handles << value.handle.to_s
-        loop_display_names << key
-      end
-    end
-
-    # add building to string vector with air loops
-    building = model.getBuilding
-    loop_handles << building.handle.to_s
-    loop_display_names << '*All Plant and Air Loops*'
-
-    # make an argument for air loops
-    object = OpenStudio::Measure::OSArgument.makeChoiceArgument('object', loop_handles, loop_display_names, true)
-    object.setDisplayName('Choose a Plant or Air Loop to Alter.')
-    object.setDefaultValue('*All Plant and Air Loops*') # if no loop is chosen this will run on all air loops
-    args << object
-
-    # make an argument to add new space true/false
-    motor_eff = OpenStudio::Measure::OSArgument.makeDoubleArgument('motor_eff', true)
-    motor_eff.setDisplayName('Set Motor Efficiency(%).')
-    motor_eff.setDefaultValue(96.0)
-    args << motor_eff
-
-    # bool argument to remove existing costs
-    remove_costs = OpenStudio::Measure::OSArgument.makeBoolArgument('remove_costs', true)
-    remove_costs.setDisplayName('Remove Baseline Costs From Effected Fans and Pumps?')
-    remove_costs.setDefaultValue(false)
-    args << remove_costs
-
-    # make an argument for material and installation cost
-    material_cost = OpenStudio::Measure::OSArgument.makeDoubleArgument('material_cost', true)
-    material_cost.setDisplayName('Material and Installation Costs per Motor ($).')
-    material_cost.setDefaultValue(0.0)
-    args << material_cost
-
-    # make an argument for demolition cost
-    demolition_cost = OpenStudio::Measure::OSArgument.makeDoubleArgument('demolition_cost', true)
-    demolition_cost.setDisplayName('Demolition Costs per Motor ($).')
-    demolition_cost.setDefaultValue(0.0)
-    args << demolition_cost
-
-    # make an argument for duration in years until costs start
-    years_until_costs_start = OpenStudio::Measure::OSArgument.makeIntegerArgument('years_until_costs_start', true)
-    years_until_costs_start.setDisplayName('Years Until Costs Start (whole years).')
-    years_until_costs_start.setDefaultValue(0)
-    args << years_until_costs_start
-
-    # make an argument to determine if demolition costs should be included in initial construction
-    demo_cost_initial_const = OpenStudio::Measure::OSArgument.makeBoolArgument('demo_cost_initial_const', true)
-    demo_cost_initial_const.setDisplayName('Demolition Costs Occur During Initial Construction?')
-    demo_cost_initial_const.setDefaultValue(false)
-    args << demo_cost_initial_const
-
-    # make an argument for expected life
-    expected_life = OpenStudio::Measure::OSArgument.makeIntegerArgument('expected_life', true)
-    expected_life.setDisplayName('Expected Life (whole years).')
-    expected_life.setDefaultValue(20)
-    args << expected_life
-
-    # make an argument for o&m cost
-    om_cost = OpenStudio::Measure::OSArgument.makeDoubleArgument('om_cost', true)
-    om_cost.setDisplayName('O & M Costs per Motor ($).')
-    om_cost.setDefaultValue(0.0)
-    args << om_cost
-
-    # make an argument for o&m frequency
-    om_frequency = OpenStudio::Measure::OSArgument.makeIntegerArgument('om_frequency', true)
-    om_frequency.setDisplayName('O & M Frequency (whole years).')
-    om_frequency.setDefaultValue(1)
-    args << om_frequency
-
-    return args
-  end
-
-  # define what happens when the measure is cop
-  def run(model, runner, user_arguments)
-    super(model, runner, user_arguments)
-
-    # use the built-in error checking
-    if !runner.validateUserArguments(arguments(model), user_arguments)
-      return false
-    end
-
-    # assign the user inputs to variables
-    object = runner.getOptionalWorkspaceObjectChoiceValue('object', user_arguments, model) # model is passed in because of argument type
-    motor_eff = runner.getDoubleArgumentValue('motor_eff', user_arguments)
-    remove_costs = runner.getBoolArgumentValue('remove_costs', user_arguments)
-    material_cost = runner.getDoubleArgumentValue('material_cost', user_arguments)
-    demolition_cost = runner.getDoubleArgumentValue('demolition_cost', user_arguments)
-    years_until_costs_start = runner.getIntegerArgumentValue('years_until_costs_start', user_arguments)
-    demo_cost_initial_const = runner.getBoolArgumentValue('demo_cost_initial_const', user_arguments)
-    expected_life = runner.getIntegerArgumentValue('expected_life', user_arguments)
-    om_cost = runner.getDoubleArgumentValue('om_cost', user_arguments)
-    om_frequency = runner.getIntegerArgumentValue('om_frequency', user_arguments)
-
-    # check the loop for reasonableness
-    apply_to_all_loops = false
-    loop = nil
-    if object.empty?
-      handle = runner.getStringArgumentValue('loop', user_arguments)
-      if handle.empty?
-        runner.registerError('No loop was chosen.')
-      else
-        runner.registerError("The selected loop with handle '#{handle}' was not found in the model. It may have been removed by another measure.")
-      end
-      return false
-    else
-      if !object.get.to_Loop.empty?
-        loop = object.get.to_Loop.get
-      elsif !object.get.to_Building.empty?
-        apply_to_all_loops = true
-      else
-        runner.registerError('Script Error - argument not showing up as loop.')
-        return false
-      end
-    end
-
-    # check the user_name for reasonableness
-    if (motor_eff <= 0) || (motor_eff >= 100)
-      runner.registerError('Please enter a number between 0 and 100 for motor efficiency percentage.')
-      return false
-    end
-
-    # set flags to use later
-    costs_requested = false
-
-    # set values to use later
-    yr0_capital_totalCosts_baseline = 0
-    yr0_capital_totalCosts_proposed = 0
-
-    # If demo_cost_initial_const is true then will be applied once in the lifecycle. Future replacements use the demo cost of the new construction.
-    demo_costs_of_baseline_objects = 0
-
-    # check costs for reasonableness
-    if material_cost.abs + demolition_cost.abs + om_cost.abs == 0
-      runner.registerInfo('No costs were requested for motors improvements.')
-    else
-      costs_requested = true
-    end
-
-    # check lifecycle arguments for reasonableness
-    if (years_until_costs_start < 0) && (years_until_costs_start > expected_life)
-      runner.registerError('Years until costs start should be a non-negative integer less than Expected Life.')
-    end
-    if (expected_life < 1) && (expected_life > 100)
-      runner.registerError('Choose an integer greater than 0 and less than or equal to 100 for Expected Life.')
-    end
-    if om_frequency < 1
-      runner.registerError('Choose an integer greater than 0 for O & M Frequency.')
-    end
-
-    # short def to make numbers pretty (converts 4125001.25641 to 4,125,001.26 or 4,125,001). The definition be called through this measure
-    def neat_numbers(number, roundto = 2) # round to 0 or 2)
-      if roundto == 2
-        number = format '%.2f', number
-      else
-        number = number.round
-      end
-      # regex to add commas
-      number.to_s.reverse.gsub(/([0-9]{3}(?=([0-9])))/, '\\1,').reverse
-    end
-
-    # helper that loops through lifecycle costs getting total costs under "Construction" or "Salvage" category and add to counter if occurs during year 0
-    def get_total_costs_for_objects(objects)
-      counter = 0
-      objects.each do |object|
-        object_LCCs = object.lifeCycleCosts
-        object_LCCs.each do |object_LCC|
-          if (object_LCC.category == 'Construction') || (object_LCC.category == 'Salvage')
-            if object_LCC.yearsFromStart == 0
-              counter += object_LCC.totalCost
-            end
-          end
-        end
-      end
-      return counter
-    end
-
-    # get loops for measure
-    if apply_to_all_loops
-      loops = model.getLoops
-    else
-      loops = []
-      loops << loop # only run on a single space type
-    end
-
-    # get cop values
-    initial_motor_efficiency_values = []
-    missing_initial_motor_efficiency = 0
-
-    # loop through air loops
-    loops.each do |loop|
-      supply_components = loop.supplyComponents
-
-      # find fans and pumps on loop
-      supply_components.each do |supply_component|
-        hVACComponent = supply_component.to_FanConstantVolume
-        if hVACComponent.empty?
-          hVACComponent = supply_component.to_FanVariableVolume
-        end
-        if hVACComponent.empty?
-          hVACComponent = supply_component.to_FanOnOff
-        end
-        if hVACComponent.empty?
-          hVACComponent = supply_component.to_PumpConstantSpeed
-        end
-        if hVACComponent.empty?
-          hVACComponent = supply_component.to_PumpVariableSpeed
-        end
-
-        # alter components of correct type
-        if !hVACComponent.empty?
-          hVACComponent = hVACComponent.get
-
-          # change and report changes to fans and motors
-          initial_motor_efficiency = hVACComponent.motorEfficiency
-          runner.registerInfo("Changing the motor efficiency from #{initial_motor_efficiency * 100}% to #{motor_eff}% for '#{hVACComponent.name}' onloop '#{loop.name}.'")
-          initial_motor_efficiency_values << initial_motor_efficiency
-          hVACComponent.setMotorEfficiency(motor_eff * 0.01)
-
-          # get initial year 0 cost
-          yr0_capital_totalCosts_baseline += get_total_costs_for_objects([hVACComponent])
-
-          # demo value of baseline costs associated with unit
-          demo_LCCs = hVACComponent.lifeCycleCosts
-          demo_LCCs.each do |demo_LCC|
-            if demo_LCC.category == 'Salvage'
-              demo_costs_of_baseline_objects += demo_LCC.totalCost
-            end
-          end
-
-          # remove all old costs
-          if !hVACComponent.lifeCycleCosts.empty? && (remove_costs == true)
-            runner.registerInfo("Removing existing lifecycle cost objects associated with #{hVACComponent.name}")
-            removed_costs = hVACComponent.removeLifeCycleCosts
-          end
-
-          # add new costs
-          if costs_requested == true
-
-            # adding new cost items
-            lcc_mat = OpenStudio::Model::LifeCycleCost.createLifeCycleCost("LCC_Mat - #{hVACComponent.name}", hVACComponent, material_cost, 'CostPerEach', 'Construction', expected_life, years_until_costs_start)
-            # cost for if demo_initial_Construction == true is added at the end of the measure
-            lcc_demo = OpenStudio::Model::LifeCycleCost.createLifeCycleCost("LCC_Demo - #{hVACComponent.name}", hVACComponent, demolition_cost, 'CostPerEach', 'Salvage', expected_life, years_until_costs_start + expected_life)
-            lcc_om = OpenStudio::Model::LifeCycleCost.createLifeCycleCost("LCC_OM - #{hVACComponent.name}", hVACComponent, om_cost, 'CostPerEach', 'Maintenance', om_frequency, 0)
-
-            # get final year 0 cost
-            yr0_capital_totalCosts_proposed += get_total_costs_for_objects([hVACComponent])
-
-          end
-
-        end
-      end
-    end
-
-    # add one time demo cost of removed windows if appropriate
-    if demo_cost_initial_const == true
-      building = model.getBuilding
-      lcc_baseline_demo = OpenStudio::Model::LifeCycleCost.createLifeCycleCost('LCC_baseline_demo', building, demo_costs_of_baseline_objects, 'CostPerEach', 'Salvage', 0, years_until_costs_start).get # using 0 for repeat period since one time cost.
-      runner.registerInfo("Adding one time cost of $#{neat_numbers(lcc_baseline_demo.totalCost, 0)} related to demolition of baseline objects.")
-
-      # if demo occurs on year 0 then add to initial capital cost counter
-      if lcc_baseline_demo.yearsFromStart == 0
-        yr0_capital_totalCosts_proposed += lcc_baseline_demo.totalCost
-      end
-    end
-
-    if initial_motor_efficiency_values.size + missing_initial_motor_efficiency == 0
-      runner.registerAsNotApplicable('The affected loop(s) does not contain any fans or pumps, the model will not be altered.')
-      return true
-    end
-
-    # reporting initial condition of model
-    runner.registerInitialCondition("The starting motor efficiency values in affected loop(s) range from #{initial_motor_efficiency_values.min * 100}% to #{initial_motor_efficiency_values.max * 100}%. Initial year 0 capital costs for affected fans or pumps is $#{neat_numbers(yr0_capital_totalCosts_baseline, 0)}.")
-
-    # reporting final condition of model
-    runner.registerFinalCondition("#{initial_motor_efficiency_values.size + missing_initial_motor_efficiency} fans or pumps had motor efficiency values set to #{motor_eff}%. Final year 0 capital costs for affected fans and pumps is $#{neat_numbers(yr0_capital_totalCosts_proposed, 0)}.")
-
-    return true
-  end
-end
-
-# this allows the measure to be used by the application
-ImproveMotorEfficiency.new.registerWithApplication