openstudio-common-measures 0.2.0 → 0.2.1

data/lib/measures/IncreaseInsulationRValueForRoofs/measure.xml

@@ -1,143 +0,0 @@
-<measure>
-  <schema_version>3.0</schema_version>
-  <name>increase_insulation_r_value_for_roofs</name>
-  <uid>65b798f4-207f-4aed-987a-386c865d0ccd</uid>
-  <version_id>f9eb0028-6f7e-47a8-bf77-b786f4d89dd7</version_id>
-  <version_modified>20200229T024304Z</version_modified>
-  <xml_checksum>0F858D9E</xml_checksum>
-  <class_name>IncreaseInsulationRValueForRoofs</class_name>
-  <display_name>Increase R-value of Insulation for Roofs to a Specific Value</display_name>
-  <description>Set the R-Value of roof insulation to a specified value.  Higher R-Values provide better insulation, lowering heat loss and heat gain through the roof.</description>
-  <modeler_description>Set the R-Value (ft^2*h*R/Btu) of the insulation material layer in all roofs in the model to a specified value.  Find constructions used for roofs, make copies of these and assign them to the appropriate construction sets or surfaces. Identify which layer of the construction is the insulation layer. This could be a Material, No Mass Material, or Air Gap Material. If the Insulation layer is "Material? the thickness will be changed to attain the desired R-Value. If the insulation layer is "No Mass Material? or "Air Gap Material? the Thermal Resistance will be directly entered.  If the construction doesn't appear to have an insulation layer, it will not be altered. Surfaces with "Adiabatic" boundary conditions are not specifically assumed to be interior or exterior. As a result constructions used on "Adiabatic" surfaces will not be altered. Constructions used on attic floors will not be altered.&#xd;&#xd;&#xd;&#xd;&#xd;&#xd;
-&#xd;&#xd;&#xd;&#xd;&#xd;&#xd;
-The resulting construction will retain the cost data from the source construction, however material and installation cost can be increased which will affect replacement cost if it happens during the analysis period. Additionally a one-time cost can be added to reflect any retrofit costs that occur at some point prior to replacement.&#xd;&#xd;&#xd;&#xd;&#xd;&#xd;
-  </modeler_description>
-  <arguments>
-    <argument>
-      <name>r_value</name>
-      <display_name>Insulation R-value (ft^2*h*R/Btu).</display_name>
-      <type>Double</type>
-      <required>true</required>
-      <model_dependent>false</model_dependent>
-      <default_value>30</default_value>
-    </argument>
-    <argument>
-      <name>allow_reduction</name>
-      <display_name>Allow both increase and decrease in R-value to reach requested target?</display_name>
-      <type>Boolean</type>
-      <required>true</required>
-      <model_dependent>false</model_dependent>
-      <default_value>false</default_value>
-      <choices>
-        <choice>
-          <value>true</value>
-          <display_name>true</display_name>
-        </choice>
-        <choice>
-          <value>false</value>
-          <display_name>false</display_name>
-        </choice>
-      </choices>
-    </argument>
-    <argument>
-      <name>material_cost_increase_ip</name>
-      <display_name>Increase in Material and Installation Costs for Construction per Area Used ($/ft^2).</display_name>
-      <type>Double</type>
-      <required>true</required>
-      <model_dependent>false</model_dependent>
-      <default_value>0</default_value>
-    </argument>
-    <argument>
-      <name>one_time_retrofit_cost_ip</name>
-      <display_name>One Time Retrofit Cost to Add Insulation to Construction ($/ft^2).</display_name>
-      <type>Double</type>
-      <required>true</required>
-      <model_dependent>false</model_dependent>
-      <default_value>0</default_value>
-    </argument>
-    <argument>
-      <name>years_until_retrofit_cost</name>
-      <display_name>Year to Incur One Time Retrofit Cost (whole years).</display_name>
-      <type>Integer</type>
-      <required>true</required>
-      <model_dependent>false</model_dependent>
-      <default_value>0</default_value>
-    </argument>
-  </arguments>
-  <outputs/>
-  <provenances/>
-  <tags>
-    <tag>Envelope.Opaque</tag>
-  </tags>
-  <attributes>
-    <attribute>
-      <name>Measure Type</name>
-      <value>ModelMeasure</value>
-      <datatype>string</datatype>
-    </attribute>
-    <attribute>
-      <name>Measure Function</name>
-      <value>Measure</value>
-      <datatype>string</datatype>
-    </attribute>
-    <attribute>
-      <name>Requires EnergyPlus Results</name>
-      <value>false</value>
-      <datatype>boolean</datatype>
-    </attribute>
-    <attribute>
-      <name>Uses SketchUp API</name>
-      <value>false</value>
-      <datatype>boolean</datatype>
-    </attribute>
-  </attributes>
-  <files>
-    <file>
-      <filename>EnvelopeAndLoadTestModel_01.osm</filename>
-      <filetype>osm</filetype>
-      <usage_type>test</usage_type>
-      <checksum>10AA8866</checksum>
-    </file>
-    <file>
-      <filename>ReverseTranslatedModel.osm</filename>
-      <filetype>osm</filetype>
-      <usage_type>test</usage_type>
-      <checksum>0B94403D</checksum>
-    </file>
-    <file>
-      <filename>README.md.erb</filename>
-      <filetype>erb</filetype>
-      <usage_type>readmeerb</usage_type>
-      <checksum>703C9964</checksum>
-    </file>
-    <file>
-      <filename>README.md</filename>
-      <filetype>md</filetype>
-      <usage_type>readme</usage_type>
-      <checksum>62C992A9</checksum>
-    </file>
-    <file>
-      <filename>IncreaseInsulationRValueForRoofs_Test.rb</filename>
-      <filetype>rb</filetype>
-      <usage_type>test</usage_type>
-      <checksum>4021A34F</checksum>
-    </file>
-    <file>
-      <filename>LICENSE.md</filename>
-      <filetype>md</filetype>
-      <usage_type>license</usage_type>
-      <checksum>E0468DD6</checksum>
-    </file>
-    <file>
-      <version>
-        <software_program>OpenStudio</software_program>
-        <identifier>2.0.0</identifier>
-        <min_compatible>2.0.0</min_compatible>
-      </version>
-      <filename>measure.rb</filename>
-      <filetype>rb</filetype>
-      <usage_type>script</usage_type>
-      <checksum>1496AE9B</checksum>
-    </file>
-  </files>
-</measure>

data/lib/measures/ReduceElectricEquipmentLoadsByPercentage/LICENSE.md

@@ -1,27 +0,0 @@
-OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC. All rights reserved.
-
-Redistribution and use in source and binary forms, with or without modification, are permitted 
-provided that the following conditions are met:
-
-(1) Redistributions of source code must retain the above copyright notice, this list of conditions 
-and the following disclaimer.
-
-(2) Redistributions in binary form must reproduce the above copyright notice, this list of conditions
-and the following disclaimer in the documentation and/or other materials provided with the distribution.
-
-(3) Neither the name of the copyright holder nor the names of any contributors may be used to endorse 
-or promote products derived from this software without specific prior written permission from the 
-respective party.
-
-(4) Other than as required in clauses (1) and (2), distributions in any form of modifications or other 
-derivative works may not use the "OpenStudio" trademark, "OS", "os", or any other confusingly similar 
-designation without specific prior written permission from Alliance for Sustainable Energy, LLC.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED 
-WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
-PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER, THE UNITED STATES GOVERNMENT, 
-OR ANY CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
-OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
-STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

data/lib/measures/ReduceElectricEquipmentLoadsByPercentage/README.md

@@ -1,97 +0,0 @@
-
-
-###### (Automatically generated documentation)
-
-# Reduce Electric Equipment Loads by Percentage
-
-## Description
-Reduce Electric Equipment Loads by Percentage</display_name>
-  <description>Reduce electric equipment loads. This will affect equipment that have a, power, power per area (LPD), or power per person value. This can be applied to the entire building or a specific space type. A positive percentage represents an increase electric equipment power, while a negative percentage can be used for an increase in electric equipment power.
-
-## Modeler Description
-Loop through all electric equipment objects in the specified space type or the entire building. Clone the definition if it has not already been cloned, rename and adjust the power based on the specified percentage. Link the new definition to the existing electric equipment instance. Loop through objects first in space types and then in spaces, but only for spaces that are in the specified space type, unless entire building has been chosen.
-
-## Measure Type
-ModelMeasure
-
-## Taxonomy
-
-
-## Arguments
-
-
-### Apply the Measure to a Specific Space Type or to the Entire Model
-
-**Name:** space_type,
-**Type:** Choice,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-### Electric Equipment Power Reduction
-
-**Name:** elecequip_power_reduction_percent,
-**Type:** Double,
-**Units:** %,
-**Required:** true,
-**Model Dependent:** false
-
-### Increase in Material and Installation Cost for Electric Equipment per Floor Area
-
-**Name:** material_and_installation_cost,
-**Type:** Double,
-**Units:** %,
-**Required:** true,
-**Model Dependent:** false
-
-### Increase in Demolition Costs for Electric Equipment per Floor Area
-
-**Name:** demolition_cost,
-**Type:** Double,
-**Units:** %,
-**Required:** true,
-**Model Dependent:** false
-
-### Years Until Costs Start
-
-**Name:** years_until_costs_start,
-**Type:** Integer,
-**Units:** whole years,
-**Required:** true,
-**Model Dependent:** false
-
-### Demolition Costs Occur During Initial Construction
-
-**Name:** demo_cost_initial_const,
-**Type:** Boolean,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-### Expected Life
-
-**Name:** expected_life,
-**Type:** Integer,
-**Units:** whole years,
-**Required:** true,
-**Model Dependent:** false
-
-### Increase O & M Costs for Electric Equipment per Floor Area
-
-**Name:** om_cost,
-**Type:** Double,
-**Units:** %,
-**Required:** true,
-**Model Dependent:** false
-
-### O & M Frequency
-
-**Name:** om_frequency,
-**Type:** Integer,
-**Units:** whole years,
-**Required:** true,
-**Model Dependent:** false
-
-
-
-

data/lib/measures/ReduceElectricEquipmentLoadsByPercentage/README.md.erb

@@ -1,42 +0,0 @@
-<%#= README.md.erb is used to auto-generate README.md. %>
-<%#= To manually maintain README.md throw away README.md.erb and manually edit README.md %>
-###### (Automatically generated documentation)
-
-# <%= name %>
-
-## Description
-<%= description %>
-
-## Modeler Description
-<%= modelerDescription %>
-
-## Measure Type
-<%= measureType %>
-
-## Taxonomy
-<%= taxonomy %>
-
-## Arguments
-
-<% arguments.each do |argument| %>
-### <%= argument[:display_name] %>
-<%= argument[:description] %>
-**Name:** <%= argument[:name] %>,
-**Type:** <%= argument[:type] %>,
-**Units:** <%= argument[:units] %>,
-**Required:** <%= argument[:required] %>,
-**Model Dependent:** <%= argument[:model_dependent] %>
-<% end %>
-
-<% if arguments.size == 0 %>
-<%= "This measure does not have any user arguments" %>
-<% end %>
-
-<% if outputs.size > 0 %>
-## Outputs
-<% output_names = [] %>
-<% outputs.each do |output| %>
-<% output_names << output[:display_name] %>
-<% end %>
-<%= output_names.join(", ") %>
-<% end %>

data/lib/measures/ReduceElectricEquipmentLoadsByPercentage/measure.rb

@@ -1,450 +0,0 @@
-# *******************************************************************************
-# OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC.
-# All rights reserved.
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#
-# (1) Redistributions of source code must retain the above copyright notice,
-# this list of conditions and the following disclaimer.
-#
-# (2) Redistributions in binary form must reproduce the above copyright notice,
-# this list of conditions and the following disclaimer in the documentation
-# and/or other materials provided with the distribution.
-#
-# (3) Neither the name of the copyright holder nor the names of any contributors
-# may be used to endorse or promote products derived from this software without
-# specific prior written permission from the respective party.
-#
-# (4) Other than as required in clauses (1) and (2), distributions in any form
-# of modifications or other derivative works may not use the "OpenStudio"
-# trademark, "OS", "os", or any other confusingly similar designation without
-# specific prior written permission from Alliance for Sustainable Energy, LLC.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND ANY CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER(S), ANY CONTRIBUTORS, THE
-# UNITED STATES GOVERNMENT, OR THE UNITED STATES DEPARTMENT OF ENERGY, NOR ANY OF
-# THEIR EMPLOYEES, BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
-# OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# *******************************************************************************
-
-# start the measure
-class ReduceElectricEquipmentLoadsByPercentage < OpenStudio::Measure::ModelMeasure
-  # define the name that a user will see
-  def name
-    return 'Reduce Electric Equipment Loads by Percentage'
-  end
-
-  # human readable description
-  def description
-    return 'Reduce Electric Equipment Loads by Percentage</display_name>
-  <description>Reduce electric equipment loads. This will affect equipment that have a, power, power per area (LPD), or power per person value. This can be applied to the entire building or a specific space type. A positive percentage represents an increase electric equipment power, while a negative percentage can be used for an increase in electric equipment power.'
-  end
-
-  # human readable description of modeling approach
-  def modeler_description
-    return 'Loop through all electric equipment objects in the specified space type or the entire building. Clone the definition if it has not already been cloned, rename and adjust the power based on the specified percentage. Link the new definition to the existing electric equipment instance. Loop through objects first in space types and then in spaces, but only for spaces that are in the specified space type, unless entire building has been chosen.'
-  end
-
-  # define the arguments that the user will input
-  def arguments(model)
-    args = OpenStudio::Measure::OSArgumentVector.new
-
-    # make a choice argument for model objects
-    space_type_handles = OpenStudio::StringVector.new
-    space_type_display_names = OpenStudio::StringVector.new
-
-    # putting model object and names into hash
-    space_type_args = model.getSpaceTypes
-    space_type_args_hash = {}
-    space_type_args.each do |space_type_arg|
-      space_type_args_hash[space_type_arg.name.to_s] = space_type_arg
-    end
-
-    # looping through sorted hash of model objects
-    space_type_args_hash.sort.map do |key, value|
-      # only include if space type is used in the model
-      if !value.spaces.empty?
-        space_type_handles << value.handle.to_s
-        space_type_display_names << key
-      end
-    end
-
-    # add building to string vector with space type
-    building = model.getBuilding
-    space_type_handles << building.handle.to_s
-    space_type_display_names << '*Entire Building*'
-
-    # make a choice argument for space type
-    space_type = OpenStudio::Measure::OSArgument.makeChoiceArgument('space_type', space_type_handles, space_type_display_names)
-    space_type.setDisplayName('Apply the Measure to a Specific Space Type or to the Entire Model')
-    space_type.setDefaultValue('*Entire Building*') # if no space type is chosen this will run on the entire building
-    args << space_type
-
-    # make an argument for reduction percentage
-    elecequip_power_reduction_percent = OpenStudio::Measure::OSArgument.makeDoubleArgument('elecequip_power_reduction_percent', true)
-    elecequip_power_reduction_percent.setDisplayName('Electric Equipment Power Reduction')
-    elecequip_power_reduction_percent.setDefaultValue(30.0)
-    elecequip_power_reduction_percent.setUnits('%')
-    args << elecequip_power_reduction_percent
-
-    # make an argument for material and installation cost
-    material_and_installation_cost = OpenStudio::Measure::OSArgument.makeDoubleArgument('material_and_installation_cost', true)
-    material_and_installation_cost.setDisplayName('Increase in Material and Installation Cost for Electric Equipment per Floor Area')
-    material_and_installation_cost.setDefaultValue(0.0)
-    material_and_installation_cost.setUnits('%')
-    args << material_and_installation_cost
-
-    # make an argument for demolition cost
-    demolition_cost = OpenStudio::Measure::OSArgument.makeDoubleArgument('demolition_cost', true)
-    demolition_cost.setDisplayName('Increase in Demolition Costs for Electric Equipment per Floor Area')
-    demolition_cost.setDefaultValue(0.0)
-    demolition_cost.setUnits('%')
-    args << demolition_cost
-
-    # make an argument for years until costs start
-    years_until_costs_start = OpenStudio::Measure::OSArgument.makeIntegerArgument('years_until_costs_start', true)
-    years_until_costs_start.setDisplayName('Years Until Costs Start')
-    years_until_costs_start.setDefaultValue(0)
-    years_until_costs_start.setUnits('whole years')
-    args << years_until_costs_start
-
-    # make a choice argument for when demo costs occur
-    demo_cost_initial_const = OpenStudio::Measure::OSArgument.makeBoolArgument('demo_cost_initial_const', true)
-    demo_cost_initial_const.setDisplayName('Demolition Costs Occur During Initial Construction')
-    demo_cost_initial_const.setDefaultValue(false)
-    args << demo_cost_initial_const
-
-    # make an argument for expected life
-    expected_life = OpenStudio::Measure::OSArgument.makeIntegerArgument('expected_life', true)
-    expected_life.setDisplayName('Expected Life')
-    expected_life.setDefaultValue(15)
-    expected_life.setUnits('whole years')
-    args << expected_life
-
-    # make an argument for O & M cost
-    om_cost = OpenStudio::Measure::OSArgument.makeDoubleArgument('om_cost', true)
-    om_cost.setDisplayName('Increase O & M Costs for Electric Equipment per Floor Area')
-    om_cost.setDefaultValue(0.0)
-    om_cost.setUnits('%')
-    args << om_cost
-
-    # make an argument for O & M frequency
-    om_frequency = OpenStudio::Measure::OSArgument.makeIntegerArgument('om_frequency', true)
-    om_frequency.setDisplayName('O & M Frequency')
-    om_frequency.setDefaultValue(1)
-    om_frequency.setUnits('whole years')
-    args << om_frequency
-
-    return args
-  end
-
-  # define what happens when the measure is run
-  def run(model, runner, user_arguments)
-    super(model, runner, user_arguments)
-
-    # use the built-in error checking
-    if !runner.validateUserArguments(arguments(model), user_arguments)
-      return false
-    end
-
-    # assign the user inputs to variables
-    object = runner.getOptionalWorkspaceObjectChoiceValue('space_type', user_arguments, model)
-    elecequip_power_reduction_percent = runner.getDoubleArgumentValue('elecequip_power_reduction_percent', user_arguments)
-    material_and_installation_cost = runner.getDoubleArgumentValue('material_and_installation_cost', user_arguments)
-    demolition_cost = runner.getDoubleArgumentValue('demolition_cost', user_arguments)
-    years_until_costs_start = runner.getIntegerArgumentValue('years_until_costs_start', user_arguments)
-    demo_cost_initial_const = runner.getBoolArgumentValue('demo_cost_initial_const', user_arguments)
-    expected_life = runner.getIntegerArgumentValue('expected_life', user_arguments)
-    om_cost = runner.getDoubleArgumentValue('om_cost', user_arguments)
-    om_frequency = runner.getIntegerArgumentValue('om_frequency', user_arguments)
-
-    # check the space_type for reasonableness and see if measure should run on space type or on the entire building
-    apply_to_building = false
-    space_type = nil
-    if object.empty?
-      handle = runner.getStringArgumentValue('space_type', user_arguments)
-      if handle.empty?
-        runner.registerError('No space type was chosen.')
-      else
-        runner.registerError("The selected space type with handle '#{handle}' was not found in the model. It may have been removed by another measure.")
-      end
-      return false
-    else
-      if !object.get.to_SpaceType.empty?
-        space_type = object.get.to_SpaceType.get
-      elsif !object.get.to_Building.empty?
-        apply_to_building = true
-      else
-        runner.registerError('Script Error - argument not showing up as space type or building.')
-        return false
-      end
-    end
-
-    # check the elecequip_power_reduction_percent and for reasonableness
-    if elecequip_power_reduction_percent > 100
-      runner.registerError('Please Enter a Value less than or equal to 100 for the Electric Equipment Power Reduction Percentage.')
-      return false
-    elsif elecequip_power_reduction_percent == 0
-      runner.registerInfo('No electric electric equipment power adjustment requested, but some life cycle costs may still be affected.')
-    elsif (elecequip_power_reduction_percent < 1) && (elecequip_power_reduction_percent > -1)
-      runner.registerWarning("A Electric Equipment Power Reduction Percentage of #{elecequip_power_reduction_percent} percent is abnormally low.")
-    elsif elecequip_power_reduction_percent > 90
-      runner.registerWarning("A Electric Equipment Power Reduction Percentage of #{elecequip_power_reduction_percent} percent is abnormally high.")
-    elsif elecequip_power_reduction_percent < 0
-      runner.registerInfo('The requested value for electric equipment power reduction percentage was negative. This will result in an increase in electric eqipment power.')
-    end
-
-    # check lifecycle cost arguments for reasonableness
-    if material_and_installation_cost < -100
-      runner.registerError("Material and Installation Cost percentage increase can't be less than -100.")
-      return false
-    end
-
-    if demolition_cost < -100
-      runner.registerError("Demolition Cost percentage increase can't be less than -100.")
-      return false
-    end
-
-    if years_until_costs_start < 0
-      runner.registerError('Enter an integer greater than or equal to 0 for Years Until Costs Start.')
-      return false
-    end
-
-    if expected_life < 1
-      runner.registerError('Enter an integer greater than or equal to 1 for Expected Life.')
-      return false
-    end
-
-    if om_cost < -100
-      runner.registerError("O & M Cost percentage increase can't be less than -100.")
-      return false
-    end
-
-    if om_frequency < 1
-      runner.registerError('Choose an integer greater than 0 for O & M Frequency.')
-    end
-
-    # helper to make numbers pretty (converts 4125001.25641 to 4,125,001.26 or 4,125,001). The definition be called through this measure.
-    def neat_numbers(number, roundto = 2) # round to 0 or 2)
-      if roundto == 2
-        number = format '%.2f', number
-      else
-        number = number.round
-      end
-      # regex to add commas
-      number.to_s.reverse.gsub(/([0-9]{3}(?=([0-9])))/, '\\1,').reverse
-    end
-
-    # helper to make it easier to do unit conversions on the fly.  The definition be called through this measure.
-    def unit_helper(number, from_unit_string, to_unit_string)
-      converted_number = OpenStudio.convert(OpenStudio::Quantity.new(number, OpenStudio.createUnit(from_unit_string).get), OpenStudio.createUnit(to_unit_string).get).get.value
-    end
-
-    # helper that loops through lifecycle costs getting total costs under "Construction" or "Salvage" category and add to counter if occurs during year 0
-    def get_total_costs_for_objects(objects)
-      counter = 0
-      objects.each do |object|
-        object_LCCs = object.lifeCycleCosts
-        object_LCCs.each do |object_LCC|
-          if (object_LCC.category == 'Construction') || (object_LCC.category == 'Salvage')
-            if object_LCC.yearsFromStart == 0
-              counter += object_LCC.totalCost
-            end
-          end
-        end
-      end
-      return counter
-    end
-
-    # counter for demo cost of baseline objects
-    demo_costs_of_baseline_objects = 0
-
-    # counter for year 0 capital costs
-    yr0_capital_totalCosts = 0
-
-    # get initial electric equipment costs and multiply by -1
-    yr0_capital_totalCosts +=  get_total_costs_for_objects(model.getElectricEquipmentDefinitions) * -1
-
-    # report initial condition
-    building = model.getBuilding
-    building_equip_power = building.electricEquipmentPower
-    building_EPD = unit_helper(building.electricEquipmentPowerPerFloorArea, 'W/m^2', 'W/ft^2')
-    runner.registerInitialCondition("The model's initial building electric equipment power was  #{neat_numbers(building_equip_power, 0)} watts, an electric equipment power density of #{neat_numbers(building_EPD)} w/ft^2.")
-
-    # get space types in model
-    if apply_to_building
-      space_types = model.getSpaceTypes
-
-    else
-      space_types = []
-      space_types << space_type # only run on a single space type
-    end
-
-    # helper def to add to demo cost related to baseline objects
-    def add_to_baseline_demo_cost_counter(baseline_object, demo_cost_initial_const)
-      counter = 0
-      if demo_cost_initial_const == true
-        baseline_object_LCCs = baseline_object.lifeCycleCosts
-        baseline_object_LCCs.each do |baseline_object_LCC|
-          if baseline_object_LCC.category == 'Salvage'
-            counter += baseline_object_LCC.totalCost
-          end
-        end
-      end
-      return counter
-    end
-
-    # def to alter performance and life cycle costs of objects
-    def alter_performance_and_lcc(object, elecequip_power_reduction_percent, material_and_installation_cost, demolition_cost, om_cost, years_until_costs_start, expected_life, om_frequency, runner)
-      # edit clone based on percentage reduction
-      new_def = object
-      if !new_def.designLevel.empty?
-        new_electric_equipment_level = new_def.setDesignLevel(new_def.designLevel.get - new_def.designLevel.get * elecequip_power_reduction_percent * 0.01)
-      elsif !new_def.wattsperSpaceFloorArea.empty?
-        new_electric_equipment_per_area = new_def.setWattsperSpaceFloorArea(new_def.wattsperSpaceFloorArea.get - new_def.wattsperSpaceFloorArea.get * elecequip_power_reduction_percent * 0.01)
-      elsif !new_def.wattsperPerson.empty?
-        new_electric_equipment_per_person = new_def.setWattsperPerson(new_def.wattsperPerson.get - new_def.wattsperPerson.get * elecequip_power_reduction_percent * 0.01)
-      else
-        runner.registerWarning("'#{new_def.name}' is used by one or more instances and has no load values. Its performance was not altered.")
-      end
-
-      new_def_LCCs = new_def.lifeCycleCosts
-      if new_def_LCCs.empty?
-        if material_and_installation_cost.abs + demolition_cost.abs + om_cost.abs != 0
-          runner.registerWarning("'#{new_def.name}' had no life cycle cost objects. No cost was added for it.")
-        end
-      else
-        new_def_LCCs.each do |new_def_LCC|
-          if new_def_LCC.category == 'Construction'
-            new_def_LCC.setCost(new_def_LCC.cost * (1 + material_and_installation_cost / 100))
-            new_def_LCC.setYearsFromStart(years_until_costs_start) # just uses argument value, does not need existing value
-            new_def_LCC.setRepeatPeriodYears(expected_life) # just uses argument value, does not need existing value
-          elsif new_def_LCC.category == 'Salvage'
-            new_def_LCC.setCost(new_def_LCC.cost * (1 + demolition_cost / 100))
-            new_def_LCC.setYearsFromStart(years_until_costs_start + expected_life) # just uses argument value, does not need existing value
-            new_def_LCC.setRepeatPeriodYears(expected_life) # just uses argument value, does not need existing value
-          elsif new_def_LCC.category == 'Maintenance'
-            new_def_LCC.setCost(new_def_LCC.cost * (1 + om_cost / 100))
-            new_def_LCC.setRepeatPeriodYears(om_frequency) # just uses argument value, does not need existing value
-          end
-
-          # reset any month durations
-          new_def_LCC.resetRepeatPeriodMonths
-          new_def_LCC.resetMonthsFromStart
-        end
-
-      end
-    end
-
-    # make a hash of old defs and new electric equipment defs
-    cloned_elecequip_defs = {}
-
-    # loop through space types
-    space_types.each do |space_type|
-      next if space_type.spaces.size <= 0
-      space_type_equipments = space_type.electricEquipment
-      space_type_equipments.each do |space_type_equipment|
-        new_def = nil
-
-        # clone def if it has not already been cloned
-        exist_def = space_type_equipment.electricEquipmentDefinition
-        if !cloned_elecequip_defs[exist_def.name.get.to_s].nil?
-          new_def = cloned_elecequip_defs[exist_def.name.get.to_s]
-        else
-          # clone rename and add to hash
-          new_def = exist_def.clone(model)
-          new_def_name = new_def.setName("#{exist_def.name.get} - #{elecequip_power_reduction_percent} percent reduction")
-          new_def = new_def.to_ElectricEquipmentDefinition.get
-          cloned_elecequip_defs[exist_def.name.get.to_s] = new_def
-
-          # add demo cost of object being removed to one counter for one time demo cost for baseline objects
-          demo_costs_of_baseline_objects += add_to_baseline_demo_cost_counter(exist_def, demo_cost_initial_const)
-
-          # call def to alter performance and life cycle costs
-          alter_performance_and_lcc(new_def, elecequip_power_reduction_percent, material_and_installation_cost, demolition_cost, om_cost, years_until_costs_start, expected_life, om_frequency, runner)
-
-        end
-
-        # link instance with clone and rename
-        updated_instance = space_type_equipment.setElectricEquipmentDefinition(new_def.to_ElectricEquipmentDefinition.get)
-        updated_instance_name = space_type_equipment.setName("#{space_type_equipment.name} #{elecequip_power_reduction_percent} percent reduction")
-      end
-    end
-
-    # getting spaces in the model
-    spaces = model.getSpaces
-
-    # get space types in model
-    if apply_to_building
-      spaces = model.getSpaces
-    else
-      if !space_type.spaces.empty?
-        spaces = space_type.spaces # only run on a single space type
-      end
-    end
-
-    spaces.each do |space|
-      space_equipments = space.electricEquipment
-      space_equipments.each do |space_equipment|
-        # clone def if it has not already been cloned
-        exist_def = space_equipment.electricEquipmentDefinition
-        if cloned_elecequip_defs.any? { |k, v| k.to_s == exist_def.name.get.to_s }
-          new_def = cloned_elecequip_defs[exist_def.name.get.to_s]
-        else
-          # clone rename and add to hash
-          new_def = exist_def.clone(model)
-          new_def_name = new_def.setName("#{new_def.name} - #{elecequip_power_reduction_percent} percent reduction")
-          cloned_elecequip_defs[exist_def.name.get] = new_def
-          new_def = new_def.to_ElectricEquipmentDefinition.get
-
-          # add demo cost of object being removed to one counter for one time demo cost for baseline objects
-          demo_costs_of_baseline_objects += add_to_baseline_demo_cost_counter(exist_def, demo_cost_initial_const)
-
-          # call def to alter performance and life cycle costs
-          alter_performance_and_lcc(new_def, elecequip_power_reduction_percent, material_and_installation_cost, demolition_cost, om_cost, years_until_costs_start, expected_life, om_frequency, runner)
-
-        end
-
-        # link instance with clone and rename
-        updated_instance = space_equipment.setElectricEquipmentDefinition(new_def.to_ElectricEquipmentDefinition.get)
-        updated_instance_name = space_equipment.setName("#{space_equipment.name} #{elecequip_power_reduction_percent} percent reduction")
-      end
-    end
-
-    if cloned_elecequip_defs.empty?
-      runner.registerAsNotApplicable('No electric equipment objects were found in the specified space type(s).')
-    end
-
-    # get final electric equipment costs to use in final condition
-    yr0_capital_totalCosts +=  get_total_costs_for_objects(model.getElectricEquipmentDefinitions)
-
-    # add one time demo cost of removed electric equipment if appropriate
-    if demo_cost_initial_const == true
-      building = model.getBuilding
-      lcc_baseline_demo = OpenStudio::Model::LifeCycleCost.createLifeCycleCost('LCC_baseline_demo', building, demo_costs_of_baseline_objects, 'CostPerEach', 'Salvage', 0, years_until_costs_start).get # using 0 for repeat period since one time cost.
-      runner.registerInfo("Adding one time cost of $#{neat_numbers(lcc_baseline_demo.totalCost, 0)} related to demolition of baseline objects.")
-
-      # if demo occurs on year 0 then add to initial capital cost counter
-      if lcc_baseline_demo.yearsFromStart == 0
-        yr0_capital_totalCosts += lcc_baseline_demo.totalCost
-      end
-    end
-
-    # report final condition
-    final_building = model.getBuilding
-    final_building_equip_power = final_building.electricEquipmentPower
-    final_building_EPD = unit_helper(final_building.electricEquipmentPowerPerFloorArea, 'W/m^2', 'W/ft^2')
-    runner.registerFinalCondition("The model's final building electric equipment power was  #{neat_numbers(final_building_equip_power, 0)} watts, an electric equipment power density of #{neat_numbers(final_building_EPD)} w/ft^2. Initial capital costs associated with the improvements are $#{neat_numbers(yr0_capital_totalCosts, 0)}.")
-
-    return true
-  end
-end
-
-# this allows the measure to be used by the application
-ReduceElectricEquipmentLoadsByPercentage.new.registerWithApplication