openstudio-analysis 0.2.3 → 0.3.0

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-proxy-setup.xml

@@ -0,0 +1,16 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel proxy setup" tests="1" time="0.369479" failures="0" errors="1" skipped="0" timestamp="2014-06-10T14:29:48-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel proxy setup should have a proxy setting" time="9.4e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:145:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-setup-output-variables.0.xml

@@ -0,0 +1,70 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel setup output variables" tests="7" time="0.361947" failures="0" errors="7" skipped="0" timestamp="2014-06-10T15:47:45-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have a model" time="0.000104">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:210:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have a weather file" time="3.9e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:210:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have notes and source" time="3.7e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:210:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have typed booleans" time="3.8e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:210:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have algorithm setup" time="3.5e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:210:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should create a valid hash" time="3.5e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:210:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should write a json" time="3.5e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:210:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-setup-output-variables.1.xml

@@ -0,0 +1,70 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel setup output variables" tests="7" time="0.381385" failures="0" errors="7" skipped="0" timestamp="2014-06-10T16:09:08-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have a model" time="0.000108">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:211:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have a weather file" time="4.7e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:211:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have notes and source" time="4.5e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:211:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have typed booleans" time="3.8e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:211:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have algorithm setup" time="3.6e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:211:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should create a valid hash" time="3.5e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:211:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should write a json" time="5.6e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:211:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-setup-output-variables.10.xml

@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel setup output variables" tests="7" time="0.692648" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:20:06-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have a model" time="0.000235">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have a weather file" time="0.000129">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have notes and source" time="0.000131">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have typed booleans" time="0.000155">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have algorithm setup" time="0.000123">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should create a valid hash" time="0.109992">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should write a json" time="0.147411">
+  </testcase>
+  <system-out>
+/Users/nlong/working/OpenStudio-analysis-gem/spec/files/partial_weather.epw
+Analysis name is Output Vars
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+Analysis name is Output Vars
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-setup-output-variables.11.xml

@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel setup output variables" tests="7" time="0.720715" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:20:50-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have a model" time="0.000229">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have a weather file" time="0.000127">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have notes and source" time="0.000133">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have typed booleans" time="0.000113">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have algorithm setup" time="0.000119">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should create a valid hash" time="0.102071">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should write a json" time="0.157779">
+  </testcase>
+  <system-out>
+/Users/nlong/working/OpenStudio-analysis-gem/spec/files/partial_weather.epw
+Analysis name is Output Vars
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+Analysis name is Output Vars
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-setup-output-variables.2.xml

@@ -0,0 +1,70 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel setup output variables" tests="7" time="0.456428" failures="0" errors="7" skipped="0" timestamp="2014-06-11T07:46:00-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have a model" time="0.000107">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:210:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have a weather file" time="5.3e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:210:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have notes and source" time="4.9e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:210:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have typed booleans" time="4.0e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:210:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have algorithm setup" time="3.7e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:210:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should create a valid hash" time="4.5e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:210:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should write a json" time="3.9e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:210:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-setup-output-variables.3.xml

@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel setup output variables" tests="7" time="0.717942" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:01:22-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have a model" time="0.000249">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have a weather file" time="0.000129">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have notes and source" time="0.00014">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have typed booleans" time="0.000114">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have algorithm setup" time="0.000123">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should create a valid hash" time="0.113364">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should write a json" time="0.142975">
+  </testcase>
+  <system-out>
+/Users/nlong/working/OpenStudio-analysis-gem/spec/files/partial_weather.epw
+Analysis name is Output Vars
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+Analysis name is Output Vars
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-setup-output-variables.4.xml

@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel setup output variables" tests="7" time="0.800984" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:02:42-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have a model" time="0.000242">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have a weather file" time="0.000155">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have notes and source" time="0.000137">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have typed booleans" time="0.00011">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have algorithm setup" time="0.000119">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should create a valid hash" time="0.167581">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should write a json" time="0.168693">
+  </testcase>
+  <system-out>
+/Users/nlong/working/OpenStudio-analysis-gem/spec/files/partial_weather.epw
+Analysis name is Output Vars
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+Analysis name is Output Vars
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-setup-output-variables.5.xml

@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel setup output variables" tests="7" time="0.779628" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:03:16-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have a model" time="0.000252">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have a weather file" time="0.00017">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have notes and source" time="0.000171">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have typed booleans" time="0.000132">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have algorithm setup" time="0.000136">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should create a valid hash" time="0.155805">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should write a json" time="0.166589">
+  </testcase>
+  <system-out>
+/Users/nlong/working/OpenStudio-analysis-gem/spec/files/partial_weather.epw
+Analysis name is Output Vars
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+Analysis name is Output Vars
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-setup-output-variables.6.xml

@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel setup output variables" tests="7" time="0.6934" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:07:27-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have a model" time="0.000245">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have a weather file" time="0.000126">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have notes and source" time="0.013642">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have typed booleans" time="0.000119">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should have algorithm setup" time="0.000123">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should create a valid hash" time="0.109563">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel setup output variables should write a json" time="0.126931">
+  </testcase>
+  <system-out>
+/Users/nlong/working/OpenStudio-analysis-gem/spec/files/partial_weather.epw
+Analysis name is Output Vars
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+Analysis name is Output Vars
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>