openstudio-analysis 0.2.3 → 0.3.0

data/spec/reports/SPEC-OpenStudio-Analysis-ServerApi.10.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::ServerApi" tests="0" time="0.000176" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:09:50-06:00">
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-ServerApi.11.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::ServerApi" tests="0" time="0.000173" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:10:43-06:00">
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-ServerApi.12.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::ServerApi" tests="0" time="0.000171" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:11:56-06:00">
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-ServerApi.13.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::ServerApi" tests="0" time="0.000237" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:20:01-06:00">
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-ServerApi.14.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::ServerApi" tests="0" time="0.000164" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:20:45-06:00">
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-ServerApi.2.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::ServerApi" tests="0" time="0.000185" failures="0" errors="0" skipped="0" timestamp="2014-06-11T07:45:54-06:00">
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-ServerApi.3.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::ServerApi" tests="0" time="0.000207" failures="0" errors="0" skipped="0" timestamp="2014-06-11T07:51:07-06:00">
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-ServerApi.4.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::ServerApi" tests="0" time="0.000113" failures="0" errors="0" skipped="0" timestamp="2014-06-11T07:56:02-06:00">
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-ServerApi.5.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::ServerApi" tests="0" time="0.000119" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:01:17-06:00">
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-ServerApi.6.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::ServerApi" tests="0" time="0.000227" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:02:36-06:00">
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-ServerApi.7.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::ServerApi" tests="0" time="0.00018" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:03:10-06:00">
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-ServerApi.8.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::ServerApi" tests="0" time="0.000173" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:07:21-06:00">
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-ServerApi.9.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::ServerApi" tests="0" time="0.000175" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:08:20-06:00">
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-ServerApi.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::ServerApi" tests="0" time="0.00017" failures="0" errors="0" skipped="0" timestamp="2014-06-10T14:29:45-06:00">
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-discrete-variables.0.xml

@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel discrete variables" tests="2" time="0.386986" failures="0" errors="2" skipped="0" timestamp="2014-06-10T15:47:45-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should have parsed the spreadsheet" time="0.000108">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:172:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should save the file" time="4.8e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:172:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-discrete-variables.1.xml

@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel discrete variables" tests="2" time="0.406697" failures="0" errors="2" skipped="0" timestamp="2014-06-10T16:09:07-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should have parsed the spreadsheet" time="0.000107">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:173:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should save the file" time="4.8e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:173:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-discrete-variables.10.xml

@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel discrete variables" tests="2" time="0.630352" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:20:05-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should have parsed the spreadsheet" time="0.000214">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should save the file" time="0.15086">
+  </testcase>
+  <system-out>
+Analysis name is Example Analysis
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-discrete-variables.11.xml

@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel discrete variables" tests="2" time="0.620555" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:20:49-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should have parsed the spreadsheet" time="0.000204">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should save the file" time="0.147108">
+  </testcase>
+  <system-out>
+Analysis name is Example Analysis
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-discrete-variables.2.xml

@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel discrete variables" tests="2" time="0.479388" failures="0" errors="2" skipped="0" timestamp="2014-06-11T07:45:59-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should have parsed the spreadsheet" time="0.000121">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:172:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should save the file" time="4.5e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:172:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-discrete-variables.3.xml

@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel discrete variables" tests="2" time="0.641892" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:01:21-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should have parsed the spreadsheet" time="0.00023">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should save the file" time="0.140919">
+  </testcase>
+  <system-out>
+Analysis name is Example Analysis
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-discrete-variables.4.xml

@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel discrete variables" tests="2" time="0.671646" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:02:41-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should have parsed the spreadsheet" time="0.000242">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should save the file" time="0.177345">
+  </testcase>
+  <system-out>
+Analysis name is Example Analysis
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-discrete-variables.5.xml

@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel discrete variables" tests="2" time="0.63163" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:03:15-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should have parsed the spreadsheet" time="0.000237">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should save the file" time="0.144358">
+  </testcase>
+  <system-out>
+Analysis name is Example Analysis
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-discrete-variables.6.xml

@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel discrete variables" tests="2" time="0.638095" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:07:26-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should have parsed the spreadsheet" time="0.000225">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should save the file" time="0.128327">
+  </testcase>
+  <system-out>
+Analysis name is Example Analysis
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-discrete-variables.7.xml

@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel discrete variables" tests="2" time="0.667423" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:08:24-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should have parsed the spreadsheet" time="0.000252">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should save the file" time="0.186017">
+  </testcase>
+  <system-out>
+Analysis name is Example Analysis
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-discrete-variables.8.xml

@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel discrete variables" tests="2" time="0.742021" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:09:55-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should have parsed the spreadsheet" time="0.000301">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should save the file" time="0.206979">
+  </testcase>
+  <system-out>
+Analysis name is Example Analysis
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-discrete-variables.9.xml

@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel discrete variables" tests="2" time="0.684978" failures="0" errors="0" skipped="0" timestamp="2014-06-11T08:10:48-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should have parsed the spreadsheet" time="0.000233">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should save the file" time="0.155135">
+  </testcase>
+  <system-out>
+Analysis name is Example Analysis
+  Adding measure item 'reduce_lighting_loads_by_percentage'
+  Adding measure item 'reducespaceinfiltrationbypercentage'
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
+  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
+  Adding measure item 'reduce_ventilation_by_percentage'
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-discrete-variables.xml

@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel discrete variables" tests="2" time="0.399078" failures="0" errors="2" skipped="0" timestamp="2014-06-10T14:29:49-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should have parsed the spreadsheet" time="0.000106">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:172:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete variables should save the file" time="3.7e-05">
+    <failure type="NoMethodError" message="undefined method `map' for 1:Fixnum">
+undefined method `map' for 1:Fixnum (NoMethodError)
+NoMethodError:
+undefined method `map' for 1:Fixnum
+     ./lib/openstudio/analysis/translator/excel.rb:798:in `parse_outputs'
+     ./lib/openstudio/analysis/translator/excel.rb:66:in `process'
+     ./spec/openstudio/analysis/translator/excel_spec.rb:172:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
+  </testcase>
+  <system-out>
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-discrete-with-dynamic-columns.0.xml

@@ -0,0 +1,17 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel discrete with dynamic columns" tests="2" time="0.418873" failures="0" errors="0" skipped="0" timestamp="2014-06-10T15:47:45-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete with dynamic columns should have parsed the spreadsheet" time="0.000315">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete with dynamic columns should save the file" time="0.044613">
+  </testcase>
+  <system-out>
+{"variable_type"=&gt;"argument", "display_name"=&gt;"Baseline", "machine_name"=&gt;"baseline", "name"=&gt;"Baseline", "index"=&gt;1, "type"=&gt;nil, "units"=&gt;nil, "distribution"=&gt;{"min"=&gt;nil, "max"=&gt;nil, "mean"=&gt;nil, "stddev"=&gt;nil, "discrete_values"=&gt;nil, "discrete_weights"=&gt;nil, "type"=&gt;nil, "static_value"=&gt;nil, "source"=&gt;nil}, "notes"=&gt;nil, "relation_to_eui"=&gt;nil}
+{"variable_type"=&gt;"variable", "display_name"=&gt;"Degrees Fahrenheit to Adjust Cooling Setpoint By.", "machine_name"=&gt;"degrees_fahrenheit_to_adjust_cooling_setpoint_by.", "name"=&gt;"cooling_adjustment", "index"=&gt;1, "type"=&gt;"double", "units"=&gt;nil, "distribution"=&gt;{"min"=&gt;0.0, "max"=&gt;5.0, "mean"=&gt;5.0, "stddev"=&gt;nil, "discrete_values"=&gt;"[-2,0,2]", "discrete_weights"=&gt;"[0.33,0.33,0.33]", "type"=&gt;"discrete_uncertain", "static_value"=&gt;0.0, "source"=&gt;nil}, "notes"=&gt;nil, "relation_to_eui"=&gt;nil}
+{"variable_type"=&gt;"variable", "display_name"=&gt;"Degrees Fahrenheit to Adjust heating Setpoint By.", "machine_name"=&gt;"degrees_fahrenheit_to_adjust_heating_setpoint_by.", "name"=&gt;"heating_adjustment", "index"=&gt;2, "type"=&gt;"double", "units"=&gt;nil, "distribution"=&gt;{"min"=&gt;0.0, "max"=&gt;5.0, "mean"=&gt;4.0, "stddev"=&gt;nil, "discrete_values"=&gt;"[-2,0,2]", "discrete_weights"=&gt;"[0.33,0.33,0.33]", "type"=&gt;"discrete_uncertain", "static_value"=&gt;0.0, "source"=&gt;nil}, "notes"=&gt;nil, "relation_to_eui"=&gt;nil}
+{"variable_type"=&gt;"argument", "display_name"=&gt;"Alter Design Day Thermostats?", "machine_name"=&gt;"alter_design_day_thermostats?", "name"=&gt;"alter_design_days", "index"=&gt;3, "type"=&gt;"bool", "units"=&gt;nil, "distribution"=&gt;{"enumerations"=&gt;["true", "false"], "min"=&gt;nil, "max"=&gt;nil, "mean"=&gt;nil, "stddev"=&gt;nil, "discrete_values"=&gt;nil, "discrete_weights"=&gt;nil, "type"=&gt;nil, "static_value"=&gt;"FALSE", "source"=&gt;nil}, "notes"=&gt;nil, "relation_to_eui"=&gt;nil}
+Analysis name is test_model
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-discrete-with-dynamic-columns.1.xml

@@ -0,0 +1,17 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<testsuite name="OpenStudio::Analysis::Translator::Excel discrete with dynamic columns" tests="2" time="0.39531" failures="0" errors="0" skipped="0" timestamp="2014-06-10T16:09:08-06:00">
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete with dynamic columns should have parsed the spreadsheet" time="0.00031">
+  </testcase>
+  <testcase name="OpenStudio::Analysis::Translator::Excel discrete with dynamic columns should save the file" time="0.029275">
+  </testcase>
+  <system-out>
+{"variable_type"=&gt;"argument", "display_name"=&gt;"Baseline", "machine_name"=&gt;"baseline", "name"=&gt;"Baseline", "index"=&gt;1, "type"=&gt;nil, "units"=&gt;nil, "distribution"=&gt;{"min"=&gt;nil, "max"=&gt;nil, "mean"=&gt;nil, "stddev"=&gt;nil, "discrete_values"=&gt;nil, "discrete_weights"=&gt;nil, "type"=&gt;nil, "static_value"=&gt;nil, "source"=&gt;nil}, "notes"=&gt;nil, "relation_to_eui"=&gt;nil}
+{"variable_type"=&gt;"variable", "display_name"=&gt;"Degrees Fahrenheit to Adjust Cooling Setpoint By.", "machine_name"=&gt;"degrees_fahrenheit_to_adjust_cooling_setpoint_by.", "name"=&gt;"cooling_adjustment", "index"=&gt;1, "type"=&gt;"double", "units"=&gt;nil, "distribution"=&gt;{"min"=&gt;0.0, "max"=&gt;5.0, "mean"=&gt;5.0, "stddev"=&gt;nil, "discrete_values"=&gt;"[-2,0,2]", "discrete_weights"=&gt;"[0.33,0.33,0.33]", "type"=&gt;"discrete_uncertain", "static_value"=&gt;0.0, "source"=&gt;nil}, "notes"=&gt;nil, "relation_to_eui"=&gt;nil}
+{"variable_type"=&gt;"variable", "display_name"=&gt;"Degrees Fahrenheit to Adjust heating Setpoint By.", "machine_name"=&gt;"degrees_fahrenheit_to_adjust_heating_setpoint_by.", "name"=&gt;"heating_adjustment", "index"=&gt;2, "type"=&gt;"double", "units"=&gt;nil, "distribution"=&gt;{"min"=&gt;0.0, "max"=&gt;5.0, "mean"=&gt;4.0, "stddev"=&gt;nil, "discrete_values"=&gt;"[-2,0,2]", "discrete_weights"=&gt;"[0.33,0.33,0.33]", "type"=&gt;"discrete_uncertain", "static_value"=&gt;0.0, "source"=&gt;nil}, "notes"=&gt;nil, "relation_to_eui"=&gt;nil}
+{"variable_type"=&gt;"argument", "display_name"=&gt;"Alter Design Day Thermostats?", "machine_name"=&gt;"alter_design_day_thermostats?", "name"=&gt;"alter_design_days", "index"=&gt;3, "type"=&gt;"bool", "units"=&gt;nil, "distribution"=&gt;{"enumerations"=&gt;["true", "false"], "min"=&gt;nil, "max"=&gt;nil, "mean"=&gt;nil, "stddev"=&gt;nil, "discrete_values"=&gt;nil, "discrete_weights"=&gt;nil, "type"=&gt;nil, "static_value"=&gt;"FALSE", "source"=&gt;nil}, "notes"=&gt;nil, "relation_to_eui"=&gt;nil}
+Analysis name is test_model
+  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
+  </system-out>
+  <system-err>
+  </system-err>
+</testsuite>