openc3 5.0.11 → 5.1.1

checksums.yaml

@@ -1,7 +1,7 @@
 ---
 SHA256:
-  metadata.gz: 89287db0131e005414e13d5e1ad18916fb85af1fecd415feb234ded2dc7808a4
-  data.tar.gz: 18ba67b0e23fb908c256540fe380e863655d7fd8b9368dd42fea34d254820c61
+  metadata.gz: fa2f9aabf07f0b9c9237f2f44644c8da055ca3069d46399db837b3b9bb22fdb3
+  data.tar.gz: 16afda4302a384d554872ff416ba76f3c822cf36f986687256f71e6c2e729370
 SHA512:
-  metadata.gz: c181ccc282a7a97baf9f5bba954822d6e38499ead775bb8261216e70f1ecd4870bc071f2c9a56aa835697f4596e0748df018bde8a18486deb1a9a63360217f66
-  data.tar.gz: ea11fef50705c7cfa4c74f239abbf0c0c02b163a10c3cda6db15408eb3fef1fd69501df8be844741d49f274a1ad9edc01af866614f20ccd400c24f5ab73a512d
+  metadata.gz: 394108166336ca206f0d56caa9d805e3c694a8c80b47915e3552fab228e8a9418bb61bd616ac897127e01b920d7da28d7e3c2bb0673e3e28e45283f44d0c9eda
+  data.tar.gz: ce284cea11dc3bf1c788cb89bfced3ff783b892902ec0f0dcc1922ba6edffda0ef9fe0bc5ef358fec95949e15425f8241e66a36f7a5f9472a39167e0cc4f9b53

data/Guardfile

@@ -16,6 +16,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 
 # A sample Guardfile
 # More info at https://github.com/guard/guard#readme

data/LICENSE.txt

@@ -1,19 +1,21 @@
-The OpenC3 software program is a derived work based on the 
+The OpenC3 COSMOS software program is a derived work based on the 
 Ball Aerospace COSMOS software licensed under the
 GNU Affero General Public License, version 3 with the Addendums listed below.
 
+Commercial licensing is also available for purchase from OpenC3, Inc.
+
 Please note that the verbiage of the AGPL below are copyrighted
 by the Free Software Foundation, but the instance of code to which the
-licenses refer (the OpenC3 software) is copyrighted by
+licenses refer (the OpenC3 COSMOS software) is copyrighted by
 OpenC3 Inc. and/or Ball Aerospace and Technologies Corp as marked in each file.
 
 Also please note that the only valid versions of the AGPL
-that pertain to OpenC3 are the particular versions of
+that pertain to OpenC3 COSMOS are the particular versions of
 the license reproduced below (i.e., versions 3, rather than any other
 versions of the AGPL), unless explicitly otherwise stated.
 
                 OpenC3 AGPL, version 3 LICENSE ADDENDUMS
-                OpenC3 Version 5, 16 July 2022
+                OpenC3 COSMOS Version 5, 16 July 2022
 
 The following addendums are made under section 7 of the GNU Affero General
 Public License, version 3.
@@ -24,7 +26,7 @@ Public License, version 3.
 2.	Modified applications and source files must be clearly marked as
     "modified" with the modification author and company indicated
     immediately following the copyright and legal notices.
-3.	OpenC3 is trademark of OpenC3, Inc. and may be used for publicity purposes 
+3.	OpenC3, and OpenC3 COSMOS are trademarks of OpenC3, Inc. and may be used for publicity purposes 
     only in a manner that constitutes "fair use" under applicable trademark 
     law, except with the express, written permission of OpenC3 Inc.
 

data/README.md

@@ -11,27 +11,29 @@
 `set RUBYLIB=C:\git\openc3\openc3\lib`
 
 ## Windows Environment variables
+
 ```
 set OPENC3_REDIS_USERNAME=openc3
 set OPENC3_REDIS_PASSWORD=openc3password
-set OPENC3_MINIO_USERNAME=openc3minio
-set OPENC3_MINIO_PASSWORD=openc3miniopassword
+set OPENC3_BUCKET_USERNAME=openc3minio
+set OPENC3_BUCKET_PASSWORD=openc3miniopassword
 set OPENC3_SERVICE_PASSWORD=openc3service
 set OPENC3_SR_REDIS_USERNAME=scriptrunner
 set OPENC3_SR_REDIS_PASSWORD=scriptrunnerpassword
-set OPENC3_SR_MINIO_USERNAME=scriptrunnerminio
-set OPENC3_SR_MINIO_PASSWORD=scriptrunnerminiopassword
+set OPENC3_SR_BUCKET_USERNAME=scriptrunnerminio
+set OPENC3_SR_BUCKET_PASSWORD=scriptrunnerminiopassword
 ```
 
 ## Linux Environment variables
+
 ```
 OPENC3_REDIS_USERNAME=openc3
 OPENC3_REDIS_PASSWORD=openc3password
-OPENC3_MINIO_USERNAME=openc3minio
-OPENC3_MINIO_PASSWORD=openc3miniopassword
+OPENC3_BUCKET_USERNAME=openc3minio
+OPENC3_BUCKET_PASSWORD=openc3miniopassword
 OPENC3_SERVICE_PASSWORD=openc3service
 OPENC3_SR_REDIS_USERNAME=scriptrunner
 OPENC3_SR_REDIS_PASSWORD=scriptrunnerpassword
-OPENC3_SR_MINIO_USERNAME=scriptrunnerminio
-OPENC3_SR_MINIO_PASSWORD=scriptrunnerminiopassword
-```
+OPENC3_SR_BUCKET_USERNAME=scriptrunnerminio
+OPENC3_SR_BUCKET_PASSWORD=scriptrunnerminiopassword
+```

data/Rakefile

@@ -16,6 +16,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 
 require 'open3'
 

data/bin/cstol_converter

@@ -17,6 +17,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 
 # This file converts OASIS CSTOL files to OpenC3 scripts
 

data/bin/openc3cli

@@ -17,12 +17,15 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license
+# if purchased from OpenC3, Inc.
 
 # This file will handle OpenC3 tasks such as instantiating a new project
 
 require 'openc3'
 require 'openc3/utilities/local_mode'
-require 'openc3/utilities/s3'
+require 'openc3/utilities/bucket'
 require 'openc3/models/scope_model'
 require 'openc3/models/plugin_model'
 require 'openc3/models/gem_model'
@@ -40,6 +43,8 @@ require 'erb'
 require 'pp'
 
 $redis_url = "redis://#{ENV['OPENC3_REDIS_HOSTNAME']}:#{ENV['OPENC3_REDIS_PORT']}"
+# Initialize the connection to the bucket library
+OpenC3::Bucket.getClient()
 
 # Build the OpenStruct and OptionParser here as constants so we can use in methods
 MIGRATE_OPTIONS = OpenStruct.new
@@ -63,7 +68,7 @@ def print_usage
   puts "  #{MIGRATE_PARSER}"
   puts "  cli bridge CONFIG_FILENAME        # Run OpenC3 host bridge"
   puts "  cli bridgesetup CONFIG_FILENAME   # Create a default config file"
-  puts "  cli geminstall GEMFILENAME        # Install loaded gem to /gems"
+  puts "  cli geminstall GEMFILENAME SCOPE        # Install loaded gem to /gems"
   puts "  cli rubysloc                      # Counts Ruby SLOC recursively. Run with --help for more info."
   puts "  cli xtce_converter                # Convert to and from the XTCE format. Run with --help for more info."
   puts "  cli cstol_converter               # Converts CSTOL files (.prc) to OpenC3. Run with --help for more info."
@@ -81,7 +86,7 @@ def generate(args)
     end
 
     plugin = args[1].downcase.gsub(/_+|-+/, '-')
-    plugin_name = "openc3-#{plugin}"
+    plugin_name = "openc3-cosmos-#{plugin}"
     if File.exist?(plugin_name)
       abort("Plugin #{plugin_name} already exists!")
     end
@@ -243,18 +248,20 @@ def xtce_converter(args)
       variables = nil
       variables = JSON.parse(File.read(options[:variables]), :allow_nan => true, :create_additions => true) if options[:variables]
       puts "Installing #{File.basename(options[:plugin])}"
-      plugin_hash = OpenC3::PluginModel.install_phase1(options[:plugin], variables, scope: 'DEFAULT', validate_only: true)
+      plugin_hash = OpenC3::PluginModel.install_phase1(options[:plugin], existing_variables: variables, scope: 'DEFAULT', validate_only: true)
       plugin_hash['variables']['xtce_output'] = options[:output]
-      OpenC3::PluginModel.install_phase2(plugin_hash['name'], plugin_hash['variables'], scope: 'DEFAULT', validate_only: true,
+      OpenC3::PluginModel.install_phase2(plugin_hash, scope: 'DEFAULT', validate_only: true,
         gem_file_path: options[:plugin])
       result = 0 # bash and Windows consider 0 success
     rescue => e
       puts "Error: #{e.message}"
+      puts e.backtrace
       result = ERROR_CODE
     ensure
-      name = Psych.safe_load(`gem spec #{options[:plugin]} name`).to_s
-      version = Psych.safe_load(`gem spec #{options[:plugin]} version`, permitted_classes: [Gem::Version]).to_s
-      Gem::Uninstaller.new(name, {:version => version, :force => true}).uninstall
+      # Uninstall not necessary because this is run against a temporary container
+      # name = Psych.safe_load(`gem spec #{options[:plugin]} name`).to_s
+      # version = Psych.safe_load(`gem spec #{options[:plugin]} version`, permitted_classes: [Gem::Version]).to_s
+      # Gem::Uninstaller.new(name, {:version => version, :force => true}).uninstall
       exit(result)
     end
   else
@@ -306,13 +313,10 @@ rescue => e
   puts "Error: #{e.message}"
   result = ERROR_CODE
 ensure
-  begin
-    name = Psych.safe_load(`gem spec #{plugin_file_path} name`).to_s
-    version = Psych.safe_load(`gem spec #{plugin_file_path} version`, permitted_classes: [Gem::Version]).to_s
-    Gem::Uninstaller.new(name, {:version => version, :force => true}).uninstall
-  rescue => e
-    puts "Could not uninstall #{plugin_file_path} due to #{e.message}"
-  end
+  # Uninstall not necessary because this is run against a temporary container
+  # name = Psych.safe_load(`gem spec #{plugin_file_path} name`).to_s
+  # version = Psych.safe_load(`gem spec #{plugin_file_path} version`, permitted_classes: [Gem::Version]).to_s
+  # Gem::Uninstaller.new(name, {:version => version, :force => true}).uninstall
   exit(result)
 end
 
@@ -447,8 +451,8 @@ def unload_plugin(plugin_name, scope:)
   end
 end
 
-def gem_install(gem_filename)
-  OpenC3::GemModel.install(gem_filename)
+def gem_install(gem_filename, scope:)
+  OpenC3::GemModel.install(gem_filename, scope: scope)
 end
 
 def get_redis_keys
@@ -496,7 +500,7 @@ if __FILE__ == $0
       unload_plugin(ARGV[1], scope: ARGV[2])
 
     when 'geminstall'
-      gem_install(ARGV[1])
+      gem_install(ARGV[1], scope: ARGV[2])
 
     when 'generate'
       generate(ARGV[1..-1])
@@ -583,6 +587,13 @@ if __FILE__ == $0
     when 'localinit'
       OpenC3::LocalMode.local_init()
 
+    when 'initbuckets'
+      client = OpenC3::Bucket.getClient()
+      client.create(ENV['OPENC3_CONFIG_BUCKET'])
+      client.create(ENV['OPENC3_LOGS_BUCKET'])
+      client.create(ENV['OPENC3_TOOLS_BUCKET'])
+      client.ensure_public(ENV['OPENC3_TOOLS_BUCKET'])
+
     else # Unknown task
       print_usage()
       abort("Unknown task: #{ARGV[0]}")

data/bin/rubysloc

@@ -17,6 +17,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 
 # This file provides a simple ruby sloc counter.
 # Blank lines and comment lines are ignored.  All other

data/data/config/screen.yaml

@@ -21,6 +21,14 @@ END:
   description: All layout widgets must be closed to properly identify where they
     stop. For example, a VERTICALBOX keyword must be matched with an END keyword
     to indicate where the VERTICALBOX ends.
+STALE_TIME:
+  summary: Values are marked stale if the packet time is more than Stale Time seconds in the past
+  parameters:
+    - name: value
+      required: true
+      description: Items from packets with RECEIVED_TIMESECONDS greater than this value in the past will be marked stale.
+        The default is 30s. Recommend a minimum of 2s to avoid false positives due to race conditions.
+      values: \d+
 GLOBAL_SETTING:
   summary: Applies a widget setting to all widgets of a certain type
   parameters:
@@ -122,11 +130,11 @@ SUBSETTING:
         string, e.g. "font-size: 10px"
       values: .*
 NAMED_WIDGET:
-  summary: Name a widget to allow access to it via the get_named_widget method
+  summary: Name a widget to allow access to it via the getNamedWidget method
   description: To programatically access parts of a telemetry screen you need
     to name the widget. This is useful when creating screens with buttons that
     read values from other widgets.
-  warning: get_named_widget returns the widget itself and thus must be operated
+  warning: getNamedWidget returns the widget itself and thus must be operated
     on using methods native to that widget
   parameters:
     - name: Widget Name

data/data/config/target.yaml

@@ -1,7 +1,7 @@
 ---
 TARGET:
   summary: Defines a new target
-  example: TARGET INST
+  example: TARGET INST INST
   parameters:
     - name: Folder Name
       required: true

data/data/config/widgets.yaml

@@ -746,7 +746,7 @@ VALUELIMITSBAR:
       values: <%= %w(RAW CONVERTED FORMATTED WITH_UNITS) %>
     - name: Number of characters
       required: false
-      description: The number of characters wide to make the value box (default = 8)
+      description: The number of characters wide to make the value box (default = 12)
       values: .*
 VALUELIMITSCOLUMN:
   summary: Displays an item VALUE followed by LIMITSCOLUMN
@@ -938,7 +938,7 @@ PROGRESSBAR:
       values: .*
     - name: Width
       required: false
-      description: Width of the progress bar (default = 80 pixels
+      description: Width of the progress bar (default = 100 pixels)
       values: .*
     - name: Value type
       required: false
@@ -975,7 +975,7 @@ RANGEBAR:
       values: <%= %w(RAW CONVERTED FORMATTED WITH_UNITS) %>
     - name: Width
       required: false
-      description: Width of the range bar (default = 160)
+      description: Width of the range bar (default = 100)
       values: .*
     - name: Height
       required: false
@@ -1036,11 +1036,11 @@ TEXTBOX:
       values: .+
     - name: Width
       required: false
-      description: Width of the range bar (default = 30)
+      description: Width of the textbox in px (default = 200)
       values: .*
     - name: Height
       required: false
-      description: Height of the range bar (default = 100)
+      description: Height of the textbox in px (default = 200)
       values: .*
 # TIMEGRAPH:
 #   summary: Displays a line graph of a telemetry items value verses time
@@ -1183,7 +1183,7 @@ BUTTON:
     Upon clicking, the button executes the Ruby code assigned. Buttons
     can be used to send commands and perform other tasks. If you want your button
     to use values from other widgets, define them as named widgets and read their
-    values using the get_named_widget("WIDGET_NAME").text method.
+    values using the getNamedWidget("WIDGET_NAME").text method.
   warning:
     If your button logic gets complex it's recommended to require a separate
     script and pass the screen to the script using self,

data/ext/mkrf_conf.rb

@@ -16,6 +16,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 
 # This file gems specific to platform
 

data/ext/openc3/ext/array/array.c

@@ -17,6 +17,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 */
 
 #include "ruby.h"

data/ext/openc3/ext/buffered_file/buffered_file.c

@@ -17,6 +17,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 */
 
 #include "ruby.h"

data/ext/openc3/ext/config_parser/config_parser.c

@@ -17,6 +17,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 */
 
 #include "ruby.h"

data/ext/openc3/ext/crc/crc.c

@@ -17,6 +17,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 */
 
 #include "ruby.h"

data/ext/openc3/ext/openc3_io/openc3_io.c

@@ -17,6 +17,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 */
 
 #include "ruby.h"

data/ext/openc3/ext/packet/packet.c

@@ -17,6 +17,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 */
 
 #include "ruby.h"

data/ext/openc3/ext/platform/platform.c

@@ -17,6 +17,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 */
 
 #include "ruby.h"

data/ext/openc3/ext/polynomial_conversion/polynomial_conversion.c

@@ -17,6 +17,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 */
 
 #include "ruby.h"

data/ext/openc3/ext/string/string.c

@@ -17,6 +17,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 */
 
 #include "ruby.h"

data/ext/openc3/ext/structure/structure.c

@@ -17,6 +17,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 */
 
 #include "ruby.h"

data/ext/openc3/ext/tabbed_plots_config/tabbed_plots_config.c

@@ -17,6 +17,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 */
 
 #include "ruby.h"

data/ext/openc3/ext/telemetry/telemetry.c

@@ -17,6 +17,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 */
 
 #include "ruby.h"

data/lib/cosmos.rb

@@ -16,5 +16,8 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 
 require 'openc3'

data/lib/cosmosc2.rb

@@ -16,5 +16,8 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 
 require 'openc3'

data/lib/openc3/accessors/accessor.rb

@@ -12,6 +12,9 @@
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU Affero General Public License for more details.
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 
 module OpenC3
   class Accessor

data/lib/openc3/accessors/binary_accessor.rb

@@ -16,6 +16,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 
 # This file contains the implementation of the BinaryAccessor class.
 # This class allows for easy reading and writing of binary data in Ruby

data/lib/openc3/accessors/cbor_accessor.rb

@@ -12,6 +12,9 @@
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU Affero General Public License for more details.
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 
 require 'cbor'
 require 'openc3/accessors/json_accessor'

data/lib/openc3/accessors/html_accessor.rb

@@ -12,6 +12,9 @@
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU Affero General Public License for more details.
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 
 require 'openc3/accessors/xml_accessor'
 

data/lib/openc3/accessors/json_accessor.rb

@@ -12,6 +12,9 @@
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU Affero General Public License for more details.
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 
 require 'json'
 require 'jsonpath'
@@ -48,7 +51,7 @@ module OpenC3
     def self.read_items(items, buffer)
       # Prevent JsonPath from decoding every call
       if String === buffer
-        decoded = JSON.parse(buffer)
+        decoded = JSON.parse(buffer, :allow_nan => true)
       else
         decoded = buffer
       end

data/lib/openc3/accessors/xml_accessor.rb

@@ -12,6 +12,9 @@
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU Affero General Public License for more details.
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 
 require 'nokogiri'
 require 'openc3/accessors/accessor'

data/lib/openc3/accessors.rb

@@ -12,6 +12,9 @@
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU Affero General Public License for more details.
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 
 module OpenC3
   autoload(:Accessor, 'openc3/accessors/accessor.rb')

data/lib/openc3/api/api.rb

@@ -16,6 +16,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 
 require 'openc3/script/extract'
 require 'openc3/script/api_shared'

data/lib/openc3/api/authorized_api.rb

@@ -16,6 +16,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 
 require 'openc3/api/api'
 

data/lib/openc3/api/cmd_api.rb

@@ -16,6 +16,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 
 require 'openc3/models/target_model'
 require 'openc3/topics/command_topic'
@@ -395,9 +398,9 @@ module OpenC3
         'target_name' => target_name,
         'cmd_name' => cmd_name,
         'cmd_params' => cmd_params,
-        'range_check' => range_check,
-        'hazardous_check' => hazardous_check,
-        'raw' => raw
+        'range_check' => range_check.to_s,
+        'hazardous_check' => hazardous_check.to_s,
+        'raw' => raw.to_s
       }
       Logger.info(build_cmd_output_string(target_name, cmd_name, cmd_params, packet, raw), scope: scope) if !packet["messages_disabled"]
       CommandTopic.send_command(command, scope: scope)

data/lib/openc3/api/config_api.rb

@@ -16,6 +16,9 @@
 # Modified by OpenC3, Inc.
 # All changes Copyright 2022, OpenC3, Inc.
 # All Rights Reserved
+#
+# This file may also be used under the terms of a commercial license 
+# if purchased from OpenC3, Inc.
 
 require 'openc3/models/tool_config_model'