opal-connect-rspec 0.5.0

data/rspec-core/lib/rspec/core/project_initializer.rb

@@ -0,0 +1,48 @@
+RSpec::Support.require_rspec_support "directory_maker"
+
+module RSpec
+  module Core
+    # @private
+    # Generates conventional files for an rspec project
+    class ProjectInitializer
+      attr_reader :destination, :stream, :template_path
+
+      DOT_RSPEC_FILE = '.rspec'
+      SPEC_HELPER_FILE =  'spec/spec_helper.rb'
+
+      def initialize(opts={})
+        @destination = opts.fetch(:destination, Dir.getwd)
+        @stream = opts.fetch(:report_stream, $stdout)
+        @template_path = opts.fetch(:template_path) do
+          File.expand_path("../project_initializer", __FILE__)
+        end
+      end
+
+      def run
+        copy_template DOT_RSPEC_FILE
+        copy_template SPEC_HELPER_FILE
+      end
+
+    private
+
+      def copy_template(file)
+        destination_file = File.join(destination, file)
+        return report_exists(file) if File.exist?(destination_file)
+
+        report_creating(file)
+        RSpec::Support::DirectoryMaker.mkdir_p(File.dirname(destination_file))
+        File.open(destination_file, 'w') do |f|
+          f.write File.read(File.join(template_path, file))
+        end
+      end
+
+      def report_exists(file)
+        stream.puts "   exist   #{file}"
+      end
+
+      def report_creating(file)
+        stream.puts "  create   #{file}"
+      end
+    end
+  end
+end

data/rspec-core/lib/rspec/core/project_initializer/spec/spec_helper.rb

@@ -0,0 +1,89 @@
+# This file was generated by the `rspec --init` command. Conventionally, all
+# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
+# The generated `.rspec` file contains `--require spec_helper` which will cause this
+# file to always be loaded, without a need to explicitly require it in any files.
+#
+# Given that it is always loaded, you are encouraged to keep this file as
+# light-weight as possible. Requiring heavyweight dependencies from this file
+# will add to the boot time of your test suite on EVERY test run, even for an
+# individual file that may not need all of that loaded. Instead, consider making
+# a separate helper file that requires the additional dependencies and performs
+# the additional setup, and require it from the spec files that actually need it.
+#
+# The `.rspec` file also contains a few flags that are not defaults but that
+# users commonly want.
+#
+# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
+RSpec.configure do |config|
+  # rspec-expectations config goes here. You can use an alternate
+  # assertion/expectation library such as wrong or the stdlib/minitest
+  # assertions if you prefer.
+  config.expect_with :rspec do |expectations|
+    # This option will default to `true` in RSpec 4. It makes the `description`
+    # and `failure_message` of custom matchers include text for helper methods
+    # defined using `chain`, e.g.:
+    # be_bigger_than(2).and_smaller_than(4).description
+    #   # => "be bigger than 2 and smaller than 4"
+    # ...rather than:
+    #   # => "be bigger than 2"
+    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
+  end
+
+  # rspec-mocks config goes here. You can use an alternate test double
+  # library (such as bogus or mocha) by changing the `mock_with` option here.
+  config.mock_with :rspec do |mocks|
+    # Prevents you from mocking or stubbing a method that does not exist on
+    # a real object. This is generally recommended, and will default to
+    # `true` in RSpec 4.
+    mocks.verify_partial_doubles = true
+  end
+
+# The settings below are suggested to provide a good initial experience
+# with RSpec, but feel free to customize to your heart's content.
+=begin
+  # These two settings work together to allow you to limit a spec run
+  # to individual examples or groups you care about by tagging them with
+  # `:focus` metadata. When nothing is tagged with `:focus`, all examples
+  # get run.
+  config.filter_run :focus
+  config.run_all_when_everything_filtered = true
+
+  # Limits the available syntax to the non-monkey patched syntax that is recommended.
+  # For more details, see:
+  #   - http://myronmars.to/n/dev-blog/2012/06/rspecs-new-expectation-syntax
+  #   - http://teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
+  #   - http://myronmars.to/n/dev-blog/2014/05/notable-changes-in-rspec-3#new__config_option_to_disable_rspeccore_monkey_patching
+  config.disable_monkey_patching!
+
+  # This setting enables warnings. It's recommended, but in some cases may
+  # be too noisy due to issues in dependencies.
+  config.warnings = true
+
+  # Many RSpec users commonly either run the entire suite or an individual
+  # file, and it's useful to allow more verbose output when running an
+  # individual spec file.
+  if config.files_to_run.one?
+    # Use the documentation formatter for detailed output,
+    # unless a formatter has already been configured
+    # (e.g. via a command-line flag).
+    config.default_formatter = 'doc'
+  end
+
+  # Print the 10 slowest examples and example groups at the
+  # end of the spec run, to help surface which specs are running
+  # particularly slow.
+  config.profile_examples = 10
+
+  # Run specs in random order to surface order dependencies. If you find an
+  # order dependency and want to debug it, you can fix the order by providing
+  # the seed, which is printed after each run.
+  #     --seed 1234
+  config.order = :random
+
+  # Seed global randomization in this process using the `--seed` CLI option.
+  # Setting this allows you to use `--seed` to deterministically reproduce
+  # test failures related to randomization by passing the same `--seed` value
+  # as the one that triggered the failure.
+  Kernel.srand config.seed
+=end
+end

data/rspec-core/lib/rspec/core/rake_task.rb

@@ -0,0 +1,187 @@
+require 'rake'
+require 'rake/tasklib'
+require 'rbconfig'
+
+module RSpec
+  module Core
+    # Rspec rake task
+    #
+    # @see Rakefile
+    class RakeTask < ::Rake::TaskLib
+      include ::Rake::DSL if defined?(::Rake::DSL)
+
+      # Default path to the rspec executable
+      DEFAULT_RSPEC_PATH = File.expand_path('../../../../exe/rspec', __FILE__)
+
+      # Default pattern for spec files.
+      DEFAULT_PATTERN = 'spec/**{,/*/**}/*_spec.rb'
+
+      # Name of task.
+      #
+      # default:
+      #   :spec
+      attr_accessor :name
+
+      # Files matching this pattern will be loaded.
+      #
+      # default:
+      #   'spec/**{,/*/**}/*_spec.rb'
+      attr_accessor :pattern
+
+      # Files matching this pattern will be excluded.
+      #
+      # default:
+      #   'spec/**/*_spec.rb'
+      attr_accessor :exclude_pattern
+
+      # Whether or not to fail Rake when an error occurs (typically when examples fail).
+      #
+      # default:
+      #   true
+      attr_accessor :fail_on_error
+
+      # A message to print to stderr when there are failures.
+      attr_accessor :failure_message
+
+      # Use verbose output. If this is set to true, the task will print the
+      # executed spec command to stdout.
+      #
+      # default:
+      #   true
+      attr_accessor :verbose
+
+      # Command line options to pass to ruby.
+      #
+      # default:
+      #   nil
+      attr_accessor :ruby_opts
+
+      # Path to rspec
+      #
+      # default:
+      #   'rspec'
+      attr_accessor :rspec_path
+
+      # Command line options to pass to rspec.
+      #
+      # default:
+      #   nil
+      attr_accessor :rspec_opts
+
+      def initialize(*args, &task_block)
+        @name          = args.shift || :spec
+        @ruby_opts     = nil
+        @rspec_opts    = nil
+        @verbose       = true
+        @fail_on_error = true
+        @rspec_path    = DEFAULT_RSPEC_PATH
+        @pattern       = DEFAULT_PATTERN
+
+        define(args, &task_block)
+      end
+
+      # @private
+      def run_task(verbose)
+        command = spec_command
+
+        begin
+          puts command if verbose
+          success = system(command)
+        rescue
+          puts failure_message if failure_message
+        end
+
+        return unless fail_on_error && !success
+
+        $stderr.puts "#{command} failed"
+        exit $?.exitstatus
+      end
+
+    private
+
+      # @private
+      def define(args, &task_block)
+        desc "Run RSpec code examples" unless ::Rake.application.last_comment
+
+        task name, *args do |_, task_args|
+          RakeFileUtils.__send__(:verbose, verbose) do
+            task_block.call(*[self, task_args].slice(0, task_block.arity)) if task_block
+            run_task verbose
+          end
+        end
+      end
+
+      def file_inclusion_specification
+        if ENV['SPEC']
+          FileList[ ENV['SPEC']].sort
+        elsif String === pattern && !File.exist?(pattern)
+          "--pattern #{escape pattern}"
+        else
+          # Before RSpec 3.1, we used `FileList` to get the list of matched files, and
+          # then pass that along to the `rspec` command. Starting with 3.1, we prefer to
+          # pass along the pattern as-is to the `rspec` command, for 3 reasons:
+          #
+          #   * It's *much* less verbose to pass one `--pattern` option than a long list of files.
+          #   * It ensures `task.pattern` and `--pattern` have the same behavior.
+          #   * It fixes a bug, where `task.pattern = pattern_that_matches_no_files` would run
+          #     *all* files because it would cause no pattern or file args to get passed to `rspec`,
+          #     which causes all files to get run.
+          #
+          # However, `FileList` is *far* more flexible than the `--pattern` option. Specifically, it
+          # supports individual files and directories, as well as arrays of files, directories and globs,
+          # as well as other `FileList` objects.
+          #
+          # For backwards compatibility, we have to fall back to using FileList if the user has passed
+          # a `pattern` option that will not work with `--pattern`.
+          #
+          # TODO: consider deprecating support for this and removing it in RSpec 4.
+          FileList[pattern].sort.map { |file| escape file }
+        end
+      end
+
+      # Manaully comparing because in 3.2 we have RSpec::Support::OS.windows?
+      # but in 3.1 we don't and requiring rspec/world would be weighty here.
+      if RbConfig::CONFIG['host_os'] =~ /cygwin|mswin|mingw|bccwin|wince|emx/
+        def escape(shell_command)
+          "'#{shell_command.gsub("'", "\'")}'"
+        end
+      else
+        require 'shellwords'
+
+        def escape(shell_command)
+          shell_command.shellescape
+        end
+      end
+
+      def file_exclusion_specification
+        " --exclude-pattern #{escape exclude_pattern}" if exclude_pattern
+      end
+
+      def spec_command
+        cmd_parts = []
+        cmd_parts << RUBY
+        cmd_parts << ruby_opts
+        cmd_parts << rspec_load_path
+        cmd_parts << rspec_path
+        cmd_parts << file_inclusion_specification
+        cmd_parts << file_exclusion_specification
+        cmd_parts << rspec_opts
+        cmd_parts.flatten.reject(&blank).join(" ")
+      end
+
+      def blank
+        lambda { |s| s.nil? || s == "" }
+      end
+
+      def rspec_load_path
+        @rspec_load_path ||= begin
+          core_and_support = $LOAD_PATH.grep(
+            /#{File::SEPARATOR}rspec-(core|support)[^#{File::SEPARATOR}]*#{File::SEPARATOR}lib/
+          ).uniq
+
+          "-I#{core_and_support.map { |file| escape file }.join(File::PATH_SEPARATOR)}"
+        end
+      end
+    end
+  end
+end

data/rspec-core/lib/rspec/core/reporter.rb

@@ -0,0 +1,149 @@
+module RSpec::Core
+  # A reporter will send notifications to listeners, usually formatters for the
+  # spec suite run.
+  class Reporter
+    def initialize(configuration)
+      @configuration = configuration
+      @listeners = Hash.new { |h, k| h[k] = Set.new }
+      @examples = []
+      @failed_examples = []
+      @pending_examples = []
+      @duration = @start = @load_time = nil
+    end
+
+    # @private
+    attr_reader :examples, :failed_examples, :pending_examples
+
+    # Registers a listener to a list of notifications. The reporter will send notification of
+    # events to all registered listeners
+    #
+    # @param listener [Object] An obect that wishes to be notified of reporter events
+    # @param notifications [Array] Array of symbols represents the events a listener wishes to subscribe too
+    def register_listener(listener, *notifications)
+      notifications.each do |notification|
+        @listeners[notification.to_sym] << listener
+      end
+      true
+    end
+
+    # @private
+    def registered_listeners(notification)
+      @listeners[notification].to_a
+    end
+
+    # @api
+    # @overload report(count, &block)
+    # @overload report(count, &block)
+    # @param expected_example_count [Integer] the number of examples being run
+    # @yield [Block] block yields itself for further reporting.
+    #
+    # Initializes the report run and yields itself for further reporting. The
+    # block is required, so that the reporter can manage cleaning up after the
+    # run.
+    #
+    # @example
+    #
+    #     reporter.report(group.examples.size) do |r|
+    #       example_groups.map {|g| g.run(r) }
+    #     end
+    #
+    def report(expected_example_count)
+      start(expected_example_count)
+      begin
+        yield self
+      ensure
+        finish
+      end
+    end
+
+    # @private
+    def start(expected_example_count, time=RSpec::Core::Time.now)
+      @start = time
+      @load_time = (@start - @configuration.start_time).to_f
+      notify :start, Notifications::StartNotification.new(expected_example_count, @load_time)
+    end
+
+    # @private
+    def message(message)
+      notify :message, Notifications::MessageNotification.new(message)
+    end
+
+    # @private
+    def example_group_started(group)
+      notify :example_group_started, Notifications::GroupNotification.new(group) unless group.descendant_filtered_examples.empty?
+    end
+
+    # @private
+    def example_group_finished(group)
+      notify :example_group_finished, Notifications::GroupNotification.new(group) unless group.descendant_filtered_examples.empty?
+    end
+
+    # @private
+    def example_started(example)
+      @examples << example
+      notify :example_started, Notifications::ExampleNotification.for(example)
+    end
+
+    # @private
+    def example_passed(example)
+      notify :example_passed, Notifications::ExampleNotification.for(example)
+    end
+
+    # @private
+    def example_failed(example)
+      @failed_examples << example
+      notify :example_failed, Notifications::ExampleNotification.for(example)
+    end
+
+    # @private
+    def example_pending(example)
+      @pending_examples << example
+      notify :example_pending, Notifications::ExampleNotification.for(example)
+    end
+
+    # @private
+    def deprecation(hash)
+      notify :deprecation, Notifications::DeprecationNotification.from_hash(hash)
+    end
+
+    # @private
+    def finish
+      stop
+      notify :start_dump,    Notifications::NullNotification
+      notify :dump_pending,  Notifications::ExamplesNotification.new(self)
+      notify :dump_failures, Notifications::ExamplesNotification.new(self)
+      notify :deprecation_summary, Notifications::NullNotification
+      notify :dump_summary, Notifications::SummaryNotification.new(@duration, @examples, @failed_examples, @pending_examples, @load_time)
+      unless mute_profile_output?
+        notify :dump_profile, Notifications::ProfileNotification.new(@duration, @examples, @configuration.profile_examples)
+      end
+      notify :seed, Notifications::SeedNotification.new(@configuration.seed, seed_used?)
+    ensure
+      notify :close, Notifications::NullNotification
+    end
+
+    # @private
+    def stop
+      @duration = (RSpec::Core::Time.now - @start).to_f if @start
+      notify :stop, Notifications::ExamplesNotification.new(self)
+    end
+
+    # @private
+    def notify(event, notification)
+      registered_listeners(event).each do |formatter|
+        formatter.__send__(event, notification)
+      end
+    end
+
+  private
+
+    def mute_profile_output?
+      # Don't print out profiled info if there are failures and `--fail-fast` is used, it just clutters the output
+      !@configuration.profile_examples? || (@configuration.fail_fast? && @failed_examples.size > 0)
+    end
+
+    def seed_used?
+      @configuration.seed && @configuration.seed_used?
+    end
+  end
+end