ohloh_scm 2.5.1 → 3.0.1

data/test/repositories/svn_empty/locks/db-logs.lock

@@ -1,3 +0,0 @@
-This file is not used by Subversion 1.3.x or later.
-However, its existence is required for compatibility with
-Subversion 1.2.x or earlier.

data/test/repositories/svn_empty/locks/db.lock

@@ -1,3 +0,0 @@
-This file is not used by Subversion 1.3.x or later.
-However, its existence is required for compatibility with
-Subversion 1.2.x or earlier.

data/test/repositories/svn_with_tree_move/README.txt

@@ -1,5 +0,0 @@
-This is a Subversion repository; use the 'svnadmin' tool to examine
-it.  Do not add, delete, or modify files here unless you know how
-to avoid corrupting the repository.
-
-Visit http://subversion.tigris.org/ for more information.

data/test/repositories/svn_with_tree_move/conf/authz

@@ -1,21 +0,0 @@
-### This file is an example authorization file for svnserve.
-### Its format is identical to that of mod_authz_svn authorization
-### files.
-### As shown below each section defines authorizations for the path and
-### (optional) repository specified by the section name.
-### The authorizations follow. An authorization line can refer to a
-### single user, to a group of users defined in a special [groups]
-### section, or to anyone using the '*' wildcard.  Each definition can
-### grant read ('r') access, read-write ('rw') access, or no access
-### ('').
-
-[groups]
-# harry_and_sally = harry,sally
-
-# [/foo/bar]
-# harry = rw
-# * =
-
-# [repository:/baz/fuz]
-# @harry_and_sally = rw
-# * = r

data/test/repositories/svn_with_tree_move/conf/passwd

@@ -1,8 +0,0 @@
-### This file is an example password file for svnserve.
-### Its format is similar to that of svnserve.conf. As shown in the
-### example below it contains one section labelled [users].
-### The name and password for each user follow, one account per line.
-
-[users]
-# harry = harryssecret
-# sally = sallyssecret

data/test/repositories/svn_with_tree_move/conf/svnserve.conf

@@ -1,30 +0,0 @@
-### This file controls the configuration of the svnserve daemon, if you
-### use it to allow access to this repository.  (If you only allow
-### access through http: and/or file: URLs, then this file is
-### irrelevant.)
-
-### Visit http://subversion.tigris.org/ for more information.
-
-[general]
-### These options control access to the repository for unauthenticated
-### and authenticated users.  Valid values are "write", "read",
-### and "none".  The sample settings below are the defaults.
-# anon-access = read
-# auth-access = write
-### The password-db option controls the location of the password
-### database file.  Unless you specify a path starting with a /,
-### the file's location is relative to the conf directory.
-### Uncomment the line below to use the default password file.
-# password-db = passwd
-### The authz-db option controls the location of the authorization
-### rules for path-based access control.  Unless you specify a path
-### starting with a /, the file's location is relative to the conf
-### directory.  If you don't specify an authz-db, no path-based access
-### control is done.
-### Uncomment the line below to use the default authorization file.
-# authz-db = authz
-### This option specifies the authentication realm of the repository.
-### If two repositories have the same authentication realm, they should
-### have the same password database, and vice versa.  The default realm
-### is repository's uuid.
-# realm = My First Repository

data/test/repositories/svn_with_tree_move/db/current

@@ -1 +0,0 @@
-2 5 2

data/test/repositories/svn_with_tree_move/db/format

@@ -1 +0,0 @@
-2

data/test/repositories/svn_with_tree_move/db/fs-type

@@ -1 +0,0 @@
-fsfs

data/test/repositories/svn_with_tree_move/db/revprops/0

@@ -1,5 +0,0 @@
-K 8
-svn:date
-V 27
-2009-02-12T23:29:46.930803Z
-END

data/test/repositories/svn_with_tree_move/db/revprops/1

@@ -1,13 +0,0 @@
-K 10
-svn:author
-V 5
-robin
-K 8
-svn:date
-V 27
-2009-02-12T23:31:42.224055Z
-K 7
-svn:log
-V 16
-Initial Revision
-END

data/test/repositories/svn_with_tree_move/db/revprops/2

@@ -1,13 +0,0 @@
-K 10
-svn:author
-V 5
-robin
-K 8
-svn:date
-V 27
-2009-02-12T23:32:13.278922Z
-K 7
-svn:log
-V 22
-Move tree up one level
-END

data/test/repositories/svn_with_tree_move/db/revs/0

@@ -1,11 +0,0 @@
-PLAIN
-END
-ENDREP
-id: 0.0.r0/17
-type: dir
-count: 0
-text: 0 0 4 4 2d2977d1c96f487abe4a1e202dd03b4e
-cpath: /
-
-
-17 107

data/test/repositories/svn_with_tree_move/db/revs/2

@@ -1,44 +0,0 @@
-PLAIN
-END
-ENDREP
-id: 1.0.r2/17
-type: dir
-pred: 1.0.r1/625
-count: 1
-text: 2 0 4 4 2d2977d1c96f487abe4a1e202dd03b4e
-cpath: /all
-copyroot: 0 /
-
-id: 2.1.r2/141
-type: dir
-pred: 2.0.r1/452
-count: 1
-text: 1 405 34 34 421576a59ace312937c26664b844a879
-cpath: /myproject
-copyfrom: 1 /all/myproject
-
-PLAIN
-K 3
-all
-V 13
-dir 1.0.r2/17
-K 9
-myproject
-V 14
-dir 2.1.r2/141
-END
-ENDREP
-id: 0.0.r2/367
-type: dir
-pred: 0.0.r1/782
-count: 2
-text: 2 289 65 65 bc780155f14b1d1109add7e03a436d9f
-cpath: /
-copyroot: 0 /
-
-2.0.r1/452 delete false false /all/myproject
-
-2._0.t1-1 add false false /myproject
-1 /all/myproject
-
-367 493

data/test/repositories/svn_with_tree_move/db/uuid

@@ -1 +0,0 @@
-72ad96da-afe6-45cb-97a1-ca313a930b66

data/test/repositories/svn_with_tree_move/format

@@ -1 +0,0 @@
-5

data/test/repositories/svn_with_tree_move/hooks/post-commit.tmpl

@@ -1,51 +0,0 @@
-#!/bin/sh
-
-# POST-COMMIT HOOK
-#
-# The post-commit hook is invoked after a commit.  Subversion runs
-# this hook by invoking a program (script, executable, binary, etc.)
-# named 'post-commit' (for which this file is a template) with the 
-# following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] REV          (the number of the revision just committed)
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# Because the commit has already completed and cannot be undone,
-# the exit code of the hook program is ignored.  The hook program
-# can use the 'svnlook' utility to help it examine the
-# newly-committed tree.
-#
-# On a Unix system, the normal procedure is to have 'post-commit'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'post-commit' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'post-commit.bat' or 'post-commit.exe',
-# but the basic idea is the same.
-# 
-# The hook program typically does not inherit the environment of
-# its parent process.  For example, a common problem is for the
-# PATH environment variable to not be set to its usual value, so
-# that subprograms fail to launch unless invoked via absolute path.
-# If you're having unexpected problems with a hook program, the
-# culprit may be unusual (or missing) environment variables.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter.
-# For more examples and pre-written hooks, see those in
-# the Subversion repository at
-# http://svn.collab.net/repos/svn/trunk/tools/hook-scripts/ and
-# http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts/
-
-
-REPOS="$1"
-REV="$2"
-
-commit-email.pl "$REPOS" "$REV" commit-watchers@example.org
-log-commit.py --repository "$REPOS" --revision "$REV"

data/test/repositories/svn_with_tree_move/hooks/post-lock.tmpl

@@ -1,44 +0,0 @@
-#!/bin/sh
-
-# POST-LOCK HOOK
-#
-# The post-lock hook is run after a path is locked.  Subversion runs
-# this hook by invoking a program (script, executable, binary, etc.)
-# named 'post-lock' (for which this file is a template) with the 
-# following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] USER         (the user who created the lock)
-#
-# The paths that were just locked are passed to the hook via STDIN (as
-# of Subversion 1.2, only one path is passed per invocation, but the
-# plan is to pass all locked paths at once, so the hook program
-# should be written accordingly).
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# Because the lock has already been created and cannot be undone,
-# the exit code of the hook program is ignored.  The hook program
-# can use the 'svnlook' utility to help it examine the
-# newly-created lock.
-#
-# On a Unix system, the normal procedure is to have 'post-lock'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'post-lock' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'post-lock.bat' or 'post-lock.exe',
-# but the basic idea is the same.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter:
-
-REPOS="$1"
-USER="$2"
-
-# Send email to interested parties, let them know a lock was created:
-mailer.py lock "$REPOS" "$USER" /path/to/mailer.conf

data/test/repositories/svn_with_tree_move/hooks/post-revprop-change.tmpl

@@ -1,56 +0,0 @@
-#!/bin/sh
-
-# POST-REVPROP-CHANGE HOOK
-#
-# The post-revprop-change hook is invoked after a revision property
-# has been added, modified or deleted.  Subversion runs this hook by
-# invoking a program (script, executable, binary, etc.) named
-# 'post-revprop-change' (for which this file is a template), with the
-# following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] REV          (the revision that was tweaked)
-#   [3] USER         (the username of the person tweaking the property)
-#   [4] PROPNAME     (the property that was changed)
-#   [5] ACTION       (the property was 'A'dded, 'M'odified, or 'D'eleted)
-#
-#   [STDIN] PROPVAL  ** the old property value is passed via STDIN.
-#
-# Because the propchange has already completed and cannot be undone,
-# the exit code of the hook program is ignored.  The hook program
-# can use the 'svnlook' utility to help it examine the
-# new property value.
-#
-# On a Unix system, the normal procedure is to have 'post-revprop-change'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'post-revprop-change' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'post-revprop-change.bat' or 'post-revprop-change.exe',
-# but the basic idea is the same.
-# 
-# The hook program typically does not inherit the environment of
-# its parent process.  For example, a common problem is for the
-# PATH environment variable to not be set to its usual value, so
-# that subprograms fail to launch unless invoked via absolute path.
-# If you're having unexpected problems with a hook program, the
-# culprit may be unusual (or missing) environment variables.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter.
-# For more examples and pre-written hooks, see those in
-# the Subversion repository at
-# http://svn.collab.net/repos/svn/trunk/tools/hook-scripts/ and
-# http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts/
-
-
-REPOS="$1"
-REV="$2"
-USER="$3"
-PROPNAME="$4"
-ACTION="$5"
-
-propchange-email.pl "$REPOS" "$REV" "$USER" "$PROPNAME" watchers@example.org

data/test/repositories/svn_with_tree_move/hooks/post-unlock.tmpl

@@ -1,42 +0,0 @@
-#!/bin/sh
-
-# POST-UNLOCK HOOK
-#
-# The post-unlock hook runs after a path is unlocked.  Subversion runs
-# this hook by invoking a program (script, executable, binary, etc.)
-# named 'post-unlock' (for which this file is a template) with the 
-# following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] USER         (the user who destroyed the lock)
-#
-# The paths that were just unlocked are passed to the hook via STDIN
-# (as of Subversion 1.2, only one path is passed per invocation, but
-# the plan is to pass all unlocked paths at once, so the hook program
-# should be written accordingly).
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# Because the lock has already been destroyed and cannot be undone,
-# the exit code of the hook program is ignored.
-#
-# On a Unix system, the normal procedure is to have 'post-unlock'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-# Note that 'post-unlock' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'post-unlock.bat' or 'post-unlock.exe',
-# but the basic idea is the same.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter:
-
-REPOS="$1"
-USER="$2"
-
-# Send email to interested parties, let them know a lock was removed:
-mailer.py unlock "$REPOS" "$USER" /path/to/mailer.conf

data/test/repositories/svn_with_tree_move/hooks/pre-commit.tmpl

@@ -1,70 +0,0 @@
-#!/bin/sh
-
-# PRE-COMMIT HOOK
-#
-# The pre-commit hook is invoked before a Subversion txn is
-# committed.  Subversion runs this hook by invoking a program
-# (script, executable, binary, etc.) named 'pre-commit' (for which
-# this file is a template), with the following ordered arguments:
-#
-#   [1] REPOS-PATH   (the path to this repository)
-#   [2] TXN-NAME     (the name of the txn about to be committed)
-#
-# The default working directory for the invocation is undefined, so
-# the program should set one explicitly if it cares.
-#
-# If the hook program exits with success, the txn is committed; but
-# if it exits with failure (non-zero), the txn is aborted, no commit
-# takes place, and STDERR is returned to the client.   The hook
-# program can use the 'svnlook' utility to help it examine the txn.
-#
-# On a Unix system, the normal procedure is to have 'pre-commit'
-# invoke other programs to do the real work, though it may do the
-# work itself too.
-#
-#   ***  NOTE: THE HOOK PROGRAM MUST NOT MODIFY THE TXN, EXCEPT  ***
-#   ***  FOR REVISION PROPERTIES (like svn:log or svn:author).   ***
-#
-#   This is why we recommend using the read-only 'svnlook' utility.
-#   In the future, Subversion may enforce the rule that pre-commit
-#   hooks should not modify the versioned data in txns, or else come
-#   up with a mechanism to make it safe to do so (by informing the
-#   committing client of the changes).  However, right now neither
-#   mechanism is implemented, so hook writers just have to be careful.
-#
-# Note that 'pre-commit' must be executable by the user(s) who will
-# invoke it (typically the user httpd runs as), and that user must
-# have filesystem-level permission to access the repository.
-#
-# On a Windows system, you should name the hook program
-# 'pre-commit.bat' or 'pre-commit.exe',
-# but the basic idea is the same.
-#
-# The hook program typically does not inherit the environment of
-# its parent process.  For example, a common problem is for the
-# PATH environment variable to not be set to its usual value, so
-# that subprograms fail to launch unless invoked via absolute path.
-# If you're having unexpected problems with a hook program, the
-# culprit may be unusual (or missing) environment variables.
-# 
-# Here is an example hook script, for a Unix /bin/sh interpreter.
-# For more examples and pre-written hooks, see those in
-# the Subversion repository at
-# http://svn.collab.net/repos/svn/trunk/tools/hook-scripts/ and
-# http://svn.collab.net/repos/svn/trunk/contrib/hook-scripts/
-
-
-REPOS="$1"
-TXN="$2"
-
-# Make sure that the log message contains some text.
-SVNLOOK=/opt/local/bin/svnlook
-$SVNLOOK log -t "$TXN" "$REPOS" | \
-   grep "[a-zA-Z0-9]" > /dev/null || exit 1
-
-# Check that the author of this commit has the rights to perform
-# the commit on the files and directories being modified.
-commit-access-control.pl "$REPOS" "$TXN" commit-access-control.cfg || exit 1
-
-# All checks passed, so allow the commit.
-exit 0