mongoid 8.1.13 → 9.0.0

data/lib/mongoid/matcher/regexp_budget.rb

@@ -1,389 +0,0 @@
-# frozen_string_literal: true
-
-require 'timeout'
-
-module Mongoid
-  module Matcher
-    # Bounds the time spent executing regular expressions while evaluating a
-    # single in-memory match operation.
-    #
-    # A query condition can carry an application-supplied pattern, and the
-    # in-memory matcher compiles and runs that pattern in the caller's thread.
-    # Both the cost of one match and the number of matches performed are under
-    # the control of whoever supplied the condition, so the limit is cumulative
-    # over an entire operation rather than per match.
-    #
-    # The budget is held in thread- or fiber-local storage, so concurrent
-    # queries are accounted for independently.
-    #
-    # @api private
-    module RegexpBudget
-      # Whether a per-Regexp timeout can be relied on to reach Regexp.new.
-      #
-      # MRI added them in 3.2. JRuby 10.0.6 defines Regexp::TimeoutError,
-      # reports Ruby 3.4, and does honour a timeout that reaches it, but its
-      # Regexp.new accepts the keyword only for the first couple of calls
-      # through a given call site and raises ArgumentError from then on.
-      # Because that breakage is per call site, no load-time probe can predict
-      # it: a probe at its own call site reports a capability that the call in
-      # Budget#compile does not have. So non-MRI engines are excluded outright
-      # and use the Timeout fallback, which does interrupt a Joni match already
-      # under way. Worth revisiting if JRuby fixes the keyword handling.
-      PER_REGEXP_TIMEOUT =
-        if RUBY_ENGINE == 'ruby' && defined?(::Regexp::TimeoutError)
-          true
-        else
-          false
-        end
-
-      # The exception raised by a per-Regexp timeout. Tied to the constant
-      # rather than to the probe, so that a timeout set some other way (an
-      # application assigning Regexp.timeout, say) is still translated. On
-      # Rubies with no such constant, a class that is never raised stands in.
-      TIMEOUT_ERROR = defined?(::Regexp::TimeoutError) ? ::Regexp::TimeoutError : Class.new(StandardError)
-
-      # Raised by Timeout on Rubies without per-Regexp timeouts, and converted
-      # immediately. It is private to this module so that an application's own
-      # Timeout, firing inside our block, is never mistaken for ours.
-      class TimedOut < StandardError; end
-
-      # The marker stored in thread-local storage when a scope is open but has
-      # no budget to enforce. A nil-valued thread variable reads as absent
-      # (Thread.current[:key] returns nil for a missing key), so an
-      # open-but-unbounded scope has to store a real marker; a nested call
-      # checks for the key and joins the enclosing scope rather than deciding
-      # again for itself.
-      NO_BUDGET = Object.new
-
-      # The state of one open budget: what is left of the limit, and the
-      # patterns compiled under it.
-      #
-      # @api private
-      class Budget
-        # @return [ Float ] The limit this budget started with.
-        attr_reader :limit
-
-        # @return [ Float ] The seconds left before the budget is spent.
-        attr_reader :remaining
-
-        # @param [ Float ] limit The seconds this budget may spend.
-        def initialize(limit)
-          @limit = limit
-          @remaining = limit
-          @cache = {}
-          # A per-Regexp timeout bounds one match; the cumulative budget bounds
-          # the operation. So the timeout is fixed for the life of the scope
-          # rather than following the drawdown, which is what lets a pattern be
-          # compiled once instead of once per match. It means a match that
-          # starts with almost nothing left can still run for a whole limit, so
-          # an operation can overshoot by at most one limit -- bounded, which is
-          # the point, and far cheaper than recompiling.
-          #
-          # An application that has set a stricter global Regexp.timeout keeps
-          # it: baking in a larger value would leave it less protected than it
-          # asked to be. A timeout set on one individual pattern is a different
-          # matter, and is not preserved -- Budget#compile rebuilds the pattern
-          # from its source and flags, neither of which carries one, so this
-          # value takes its place. Only trusted code can supply such a pattern:
-          # a condition decoded from JSON or BSON arrives as a string or a
-          # BSON::Regexp::Raw, with no timeout of its own.
-          @timeout = [ limit, ::Regexp.timeout ].compact.min if PER_REGEXP_TIMEOUT
-        end
-
-        # Draws the elapsed time down from the budget.
-        #
-        # @param [ Float ] elapsed The seconds to charge.
-        def charge(elapsed)
-          @remaining -= elapsed
-        end
-
-        # @return [ true | false ] Whether the budget is spent.
-        def exhausted?
-          @remaining <= 0
-        end
-
-        # Returns the condition as a Regexp which, where the Ruby in use
-        # supports it, gives up once its timeout is spent.
-        #
-        # The condition is taken uncompiled so that the cache can answer before
-        # any compiling happens. A BSON::Regexp::Raw memoizes its own compile,
-        # but FieldExpression builds a fresh one for every $regex it evaluates,
-        # so that memo is worth nothing across documents and the source would
-        # otherwise be compiled once per document.
-        #
-        # @param [ Regexp | BSON::Regexp::Raw ] condition The condition.
-        #
-        # @return [ Regexp ] The compiled pattern.
-        def compile(condition)
-          @cache[cache_key(condition)] ||= bake(RegexpBudget.coerce(condition))
-        end
-
-        private
-
-        # BSON::Regexp::Raw aliases eql? to == but leaves hash alone, so two
-        # equal instances hash differently and cannot key the cache. What they
-        # are equal by can. Anything else keys on itself and is left to coerce
-        # to reject.
-        def cache_key(condition)
-          case condition
-          when BSON::Regexp::Raw then [ condition.pattern, condition.options ]
-          else condition
-          end
-        end
-
-        # Rebuilds the pattern with the budget's timeout, where the Ruby in use
-        # has them.
-        def bake(regexp)
-          return regexp unless PER_REGEXP_TIMEOUT
-
-          ::Regexp.new(regexp.source, regexp.options, timeout: @timeout)
-        end
-      end
-
-      class << self
-        # Opens a budget scope for the duration of the block.
-        #
-        # Nested calls join the enclosing budget instead of starting a new one,
-        # which is what lets a scan over many documents share a single limit.
-        # It also keeps the recursion in Expression.matches? (through
-        # $elemMatch, $and, $or and $nor) from resetting the budget.
-        #
-        # No budget is opened for a selector that carries no regular
-        # expression. There would be nothing for it to bound, and on the
-        # Timeout path it would put a deadline on in-memory work that has
-        # nothing to do with regular expressions.
-        #
-        # The scope covers everything nested inside the block, a selector other
-        # than this one included: a nested call joins the scope rather than
-        # deciding for itself, which is what keeps a scan from walking the
-        # selector once per document. Where the scope has nothing to bound, that
-        # means nested selectors are not bounded either -- so do not open one
-        # around work that can run application code. Loading documents runs find
-        # callbacks, and a query in one of those brings its own selector.
-        #
-        # Where a selector does carry one, the Timeout path still measures the
-        # whole scope rather than the matching alone, so a long scan can trip
-        # the limit with a cheap pattern. That imprecision is accepted: the
-        # alternative is a Timeout around each individual match, which was
-        # measured at about nine seconds per million matches, and the limit
-        # exists to bound a scan of exactly that size. The error message is
-        # worded to hold either way, and Rubies with per-Regexp timeouts --
-        # every supported MRI from 3.2 on -- do not take this path at all.
-        #
-        # Code inside the block that mutates state should be wrapped in
-        # .protect, since on Rubies without a per-Regexp timeout the budget is
-        # enforced with an asynchronous exception that can land anywhere.
-        #
-        # @param [ Hash ] selector The selector about to be evaluated.
-        #
-        # @return [ Object ] The value of the block.
-        def open(selector, &block)
-          # The key is present (holding NO_BUDGET) where an enclosing scope
-          # found nothing to bound, so that a nested call does not scan the
-          # selector again. Deciding before this check, in a default argument
-          # say, would walk the selector once per document on a scan. The
-          # storage is Thread.current directly, matching this branch's Threaded
-          # conventions; only the key is shared with Threaded.
-          return yield if Thread.current[Threaded::REGEXP_BUDGET_KEY]
-
-          open_with(limit_for(selector), &block)
-        end
-
-        # Opens a budget scope for a limit the caller has already decided on.
-        #
-        # A caller that rearranges its work around the decision -- loading
-        # documents up front so that nothing is mutated before the scan
-        # finishes, say -- has to make it before it can act on it, and must not
-        # then make it a second time. Asking .limit_for and letting .open ask
-        # again reads the configured limit twice, and the two reads can differ:
-        # a limit that becomes positive in between would establish a budget in
-        # the branch that was chosen for not needing one, and on the Timeout
-        # path that arms a deadline over work the branch never made
-        # interruptible.
-        #
-        # See .open for what the scope does and does not bound, and for the
-        # note about mutating state inside it.
-        #
-        # @param [ Float | nil ] limit The seconds the scope may spend, or nil
-        #   for a scope with nothing to bound.
-        #
-        # @return [ Object ] The value of the block.
-        def open_with(limit, &block)
-          return yield if Thread.current[Threaded::REGEXP_BUDGET_KEY]
-
-          budget = Budget.new(limit) if limit&.positive?
-
-          begin
-            # Set inside the begin so that an asynchronous exception from an
-            # enclosing timeout cannot leave the key behind on a pooled thread.
-            Thread.current[Threaded::REGEXP_BUDGET_KEY] = budget || NO_BUDGET
-
-            if budget.nil? || PER_REGEXP_TIMEOUT
-              yield
-            else
-              begin
-                Timeout.timeout(budget.limit, TimedOut, &block)
-              rescue TimedOut
-                raise timeout_error(budget)
-              end
-            end
-          ensure
-            # Setting nil on the way out removes the key on MRI, and reading a
-            # nil value back is treated as absent regardless, so a lingering
-            # nil on JRuby is harmless too.
-            Thread.current[Threaded::REGEXP_BUDGET_KEY] = nil
-          end
-        end
-
-        # The limit a scope evaluating this selector would be bounded by.
-        #
-        # A caller that has to rearrange its work to make the scan
-        # interruptible -- loading documents up front so that nothing is
-        # mutated before the scan finishes, say -- can ask this first and skip
-        # the rearrangement, and whatever it costs, when there is no pattern to
-        # bound. It then passes what it got to .open_with, so that the decision
-        # it acted on is the one the scope is opened with. Callers with nothing
-        # to rearrange should just call .open, which asks this itself.
-        #
-        # @param [ Hash ] selector The selector about to be evaluated.
-        #
-        # @return [ Float | nil ] The limit, or nil where there is nothing to
-        #   bound.
-        def limit_for(selector)
-          # nil.to_f is 0.0, so an unset limit and a limit of zero or less are
-          # the same thing here: no limit. Zero is a common way to spell
-          # "disabled", and taking it literally would mean a budget that is
-          # spent before the first match and a query that can never run.
-          limit = Mongoid::Config.in_memory_regexp_time_limit.to_f
-          return nil unless limit.positive?
-
-          limit if contains_regexp?(selector)
-        end
-
-        # Matches a value against a regular expression condition, charging the
-        # time it takes against the open budget.
-        #
-        # @param [ Object ] value The value to match.
-        # @param [ Regexp | BSON::Regexp::Raw ] condition The condition.
-        #
-        # @raise [ Errors::InMemoryRegexpTimeout ] if the budget is exhausted.
-        #
-        # @return [ Integer | nil ] The offset of the match, or nil.
-        def match?(value, condition)
-          budget = current
-          return value =~ coerce(condition) unless budget
-
-          started = Process.clock_gettime(Process::CLOCK_MONOTONIC)
-          pattern = nil
-          begin
-            raise timeout_error(budget) if budget.exhausted?
-
-            # Compiling is charged too. It is not free, and for a pattern with
-            # very many branches it costs far more than running the pattern
-            # does, so leaving it out would leave a way to spend unbounded time
-            # without the budget ever noticing.
-            pattern = budget.compile(condition)
-            value =~ pattern
-          rescue TIMEOUT_ERROR
-            # Name the limit that actually fired, which is not always the
-            # budget's. A baked pattern carries it: the smaller of the budget's
-            # limit and any global Regexp.timeout the application has set.
-            # Where nothing was baked -- an engine that raises this error but
-            # will not take a per-Regexp timeout, which is JRuby -- the global
-            # is the only thing that can have fired, and the pattern reports
-            # nil. Naming the budget's limit in either case would state a time
-            # that was never spent and send the reader after a setting that is
-            # not the one in the way.
-            #
-            # Both readers arrived together with Regexp::TimeoutError, so every
-            # engine that can reach this rescue at all has them.
-            raise timeout_error(budget, pattern&.timeout || ::Regexp.timeout || budget.limit)
-          ensure
-            budget.charge(Process.clock_gettime(Process::CLOCK_MONOTONIC) - started)
-          end
-        end
-
-        # Runs the block without letting a scope timeout tear it in half.
-        #
-        # Where the budget is enforced with Timeout, the exception is raised
-        # asynchronously and can arrive at any point. Wrapping a mutation in
-        # this holds the exception back until the block has finished, so the
-        # interruption is deferred rather than given up.
-        #
-        # @return [ Object ] The value of the block.
-        def protect(&block)
-          Thread.handle_interrupt(TimedOut => :never, &block)
-        end
-
-        # The time left in the open budget, or nil when no budget is open.
-        #
-        # @return [ Float | nil ] The remaining seconds.
-        def remaining
-          current&.remaining
-        end
-
-        # Returns the condition as a Regexp, without a timeout.
-        #
-        # @param [ Regexp | BSON::Regexp::Raw ] condition The condition.
-        #
-        # @return [ Regexp ] The pattern.
-        def coerce(condition)
-          case condition
-          when ::Regexp then condition
-          when BSON::Regexp::Raw then condition.compile
-          else raise ArgumentError, "Not a regular expression: #{condition.inspect}"
-          end
-        end
-
-        private
-
-        # The budget for the open scope, if there is one.
-        #
-        # A scope with nothing to bound leaves NO_BUDGET in storage, which reads
-        # as no budget.
-        #
-        # @return [ Budget | nil ] The open budget.
-        def current
-          budget = Thread.current[Threaded::REGEXP_BUDGET_KEY]
-          budget unless budget.equal?(NO_BUDGET)
-        end
-
-        # Whether evaluating the selector could run a regular expression.
-        #
-        # A string under $regex counts: FieldExpression turns it into a pattern
-        # at match time.
-        def contains_regexp?(object)
-          case object
-          when ::Regexp, BSON::Regexp::Raw
-            true
-          when Hash
-            object.any? do |k, v|
-              k.to_s == '$regex' || contains_regexp?(v)
-            end
-          when Array
-            object.any? { |v| contains_regexp?(v) }
-          else
-            false
-          end
-        end
-
-        # Builds the error with the scope timeout held back.
-        #
-        # Composing the message goes through I18n, which reads locale files the
-        # first time it runs. An asynchronous TimedOut landing in the middle of
-        # that is caught by I18n and reraised as a locale-loading failure, so
-        # the real error never surfaces.
-        #
-        # @param [ Budget ] budget The open budget.
-        # @param [ Float ] limit The limit that was exceeded. Defaults to the
-        #   budget's own, which is the right one to name everywhere the budget
-        #   itself ran out.
-        def timeout_error(budget, limit = budget.limit)
-          protect do
-            Errors::InMemoryRegexpTimeout.new(limit)
-          end
-        end
-      end
-    end
-  end
-end

data/lib/mongoid/query_cache.rb

@@ -1,68 +0,0 @@
-# frozen_string_literal: true
-
-module Mongoid
-
-  # A cache of database queries on a per-request basis.
-  module QueryCache
-
-    class << self
-
-      # Clear the query cache.
-      #
-      # @example Clear the cache.
-      #   QueryCache.clear_cache
-      #
-      # @return [ nil ] Always nil.
-      def clear_cache
-        Mongoid::Warnings.warn_mongoid_query_cache_clear
-        Mongo::QueryCache.clear
-      end
-
-      # Set whether the cache is enabled.
-      #
-      # @example Set if the cache is enabled.
-      #   QueryCache.enabled = true
-      #
-      # @param [ true | false ] value The enabled value.
-      def enabled=(value)
-        Mongoid::Warnings.warn_mongoid_query_cache
-        Mongo::QueryCache.enabled = value
-      end
-
-      # Is the query cache enabled on the current thread?
-      #
-      # @example Is the query cache enabled?
-      #   QueryCache.enabled?
-      #
-      # @return [ true | false ] If the cache is enabled.
-      def enabled?
-        Mongoid::Warnings.warn_mongoid_query_cache
-        Mongo::QueryCache.enabled?
-      end
-
-      # Execute the block while using the query cache.
-      #
-      # @example Execute with the cache.
-      #   QueryCache.cache { collection.find }
-      #
-      # @return [ Object ] The result of the block.
-      def cache(&block)
-        Mongoid::Warnings.warn_mongoid_query_cache
-        Mongo::QueryCache.cache(&block)
-      end
-
-      # Execute the block with the query cache disabled.
-      #
-      # @example Execute without the cache.
-      #   QueryCache.uncached { collection.find }
-      #
-      # @return [ Object ] The result of the block.
-      def uncached(&block)
-        Mongoid::Warnings.warn_mongoid_query_cache
-        Mongo::QueryCache.uncached(&block)
-      end
-    end
-
-    Middleware = Mongo::QueryCache::Middleware
-  end
-end

data/lib/mongoid/validatable/numericality.rb

@@ -1,19 +0,0 @@
-# frozen_string_literal: true
-
-module Mongoid
-  module Validatable
-    # A specialization of the ActiveModel numericality validator, which adds
-    # logic to recognize and accept BSON::Decimal128 as a number.
-    class NumericalityValidator < ActiveModel::Validations::NumericalityValidator
-      private
-
-      # Ensure that BSON::Decimal128 is treated as a BigDecimal during the
-      # validation step.
-      def prepare_value_for_validation(value, record, attr_name)
-        result = super
-
-        result.is_a?(BSON::Decimal128) ? result.to_big_decimal : result
-      end
-    end
-  end
-end

data/spec/integration/matcher_regexp_timeout_spec.rb

@@ -1,215 +0,0 @@
-# frozen_string_literal: true
-
-require 'benchmark'
-require 'spec_helper'
-
-describe 'in-memory regexp time limit' do
-  # See the comment in spec/mongoid/matcher/regexp_budget_spec.rb: costly to
-  # match but bounded on every supported Ruby. A pattern relying on nested
-  # quantifiers would hang before Ruby 3.2, where the examples that have no
-  # interrupt available could not stop it.
-  let(:slow_pattern) { "(?:#{(1..300).map { |i| "a#{i}" }.join('|')})Z" }
-  let(:slow_street) { 'a' * 5_000 }
-
-  let(:person) do
-    # Address derives its _id from the street, so the streets have to differ or
-    # the embedded association collapses to a single document.
-    Person.new(addresses: Array.new(30) { |i| Address.new(street: "#{slow_street}#{i}") })
-  end
-
-  let(:one_address) { Person.new(addresses: [ Address.new(street: slow_street) ]) }
-
-  # What one match of the fixture costs on the machine running the suite. It
-  # varies by more than an order of magnitude between implementations - around
-  # 6ms on MRI, 110ms on JRuby - so the examples below calibrate against a
-  # measurement instead of hard-coding a threshold that only holds on one.
-  let(:single_match_cost) do
-    regexp = Regexp.new(slow_pattern)
-    3.times { slow_street =~ regexp }
-    Benchmark.realtime { slow_street =~ regexp }
-  end
-
-  # Comfortably more than one match, comfortably less than twenty. The examples
-  # only need the ordering to hold, so the margin either side is wide.
-  let(:calibrated_limit) { single_match_cost * 5 }
-
-  context 'when the limit is disabled' do
-    config_override :in_memory_regexp_time_limit, nil
-
-    it 'evaluates the query without a bound' do
-      expect(person.addresses.where(street: { '$regex' => slow_pattern }).to_a).to eq([])
-    end
-  end
-
-  context 'when a limit is configured' do
-    config_override :in_memory_regexp_time_limit, nil
-
-    before { Mongoid::Config.in_memory_regexp_time_limit = calibrated_limit }
-
-    it 'leaves ordinary queries alone' do
-      person = Person.new(addresses: [ Address.new(street: 'Clarkson') ])
-      expect(person.addresses.where(street: { '$regex' => '\AClark' }).to_a.size).to eq(1)
-    end
-
-    it 'does not raise for a single document' do
-      # The counterpart to the example below, and what makes it meaningful: one
-      # document stays under the limit, so a scan that raises can only have got
-      # there by accumulating cost across documents.
-      expect do
-        one_address.addresses.where(street: { '$regex' => slow_pattern }).to_a
-      end.not_to raise_error
-    end
-
-    it 'raises for a scan over many documents under that same limit' do
-      expect do
-        person.addresses.where(street: { '$regex' => slow_pattern }).to_a
-      end.to raise_error(Mongoid::Errors::InMemoryRegexpTimeout)
-    end
-
-    it 'raises when $in multiplies the cost within a single document' do
-      conditions = Array.new(20) { BSON::Regexp::Raw.new(slow_pattern) }
-
-      expect do
-        one_address.addresses.where(street: { '$in' => conditions }).to_a
-      end.to raise_error(Mongoid::Errors::InMemoryRegexpTimeout)
-    end
-
-    it 'raises through the public _matches? API' do
-      # 20 conditions rather than one, because a single match is deliberately
-      # kept well under the limit by the calibration above.
-      conditions = Array.new(20) { BSON::Regexp::Raw.new(slow_pattern) }
-
-      expect do
-        person.addresses.first._matches?('street' => { '$in' => conditions })
-      end.to raise_error(Mongoid::Errors::InMemoryRegexpTimeout)
-    end
-  end
-
-  context 'when the pattern is pathological' do
-    config_override :in_memory_regexp_time_limit, 0.2
-
-    # The ticket's Case 1, verbatim. It backtracks exponentially and is the
-    # reason the guard exists, so every entry point that evaluates a selector
-    # in memory has to bound it. The subject is kept short enough that the
-    # match still finishes on its own in a few seconds, so an entry point that
-    # fails to bound it shows up as a failing example rather than a hung run.
-    let(:evil_pattern) { '^(a+)+\1?$' }
-    let(:evil_subject) { "#{'a' * 28}X" }
-
-    it 'bounds a scan over an embedded association' do
-      person = Person.new(addresses: [ Address.new(street: evil_subject) ])
-
-      expect do
-        person.addresses.where(street: { '$regex' => evil_pattern }).to_a
-      end.to raise_error(Mongoid::Errors::InMemoryRegexpTimeout)
-    end
-
-    it 'bounds the public _matches? API' do
-      expect do
-        Address.new(street: evil_subject)._matches?('street' => { '$regex' => evil_pattern })
-      end.to raise_error(Mongoid::Errors::InMemoryRegexpTimeout)
-    end
-
-    it 'bounds removal from a referenced association' do
-      owner = Person.create!
-      owner.posts.create!(title: evil_subject)
-
-      expect do
-        owner.posts.delete_all(title: { '$regex' => evil_pattern })
-      end.to raise_error(Mongoid::Errors::InMemoryRegexpTimeout)
-    end
-
-    it 'deletes nothing when removal is bounded' do
-      # The scan runs before the delete, so the error means what a caller would
-      # take it to mean: the documents are still there.
-      owner = Person.create!
-      owner.posts.create!(title: evil_subject)
-
-      expect do
-        owner.posts.delete_all(title: { '$regex' => evil_pattern })
-      end.to raise_error(Mongoid::Errors::InMemoryRegexpTimeout)
-
-      expect(Post.count).to eq(1)
-      expect(owner.reload.posts.size).to eq(1)
-    end
-  end
-
-  context 'when the association being removed from has not been loaded' do
-    config_override :in_memory_regexp_time_limit, 0.2
-
-    let!(:owner) do
-      person = Person.create!
-      person.posts.create!(title: 'Testing')
-      Person.find(person._id)
-    end
-
-    # The query that loads the association, which removal has to run before it
-    # has anything to match against.
-    let(:load_query) { owner.posts._target._unloaded }
-
-    # A stall standing in for a slow network. It is longer than the limit, and
-    # none of it is time spent on regular expressions.
-    before do
-      allow(load_query).to receive(:each).and_wrap_original do |original, *args, &block|
-        sleep(0.3)
-        original.call(*args, &block)
-      end
-    end
-
-    it 'does not load it, so no query can be counted against the limit' do
-      # On the Timeout path a deadline covering the fetch failed a slow query
-      # with an error about regular expressions, and the asynchronous exception
-      # could land inside the driver's socket read, leaving the connection with
-      # unconsumed bytes. Nothing is fetched now: the scan sees only what the
-      # association already holds.
-      stub_const('Mongoid::Matcher::RegexpBudget::PER_REGEXP_TIMEOUT', false)
-
-      expect do
-        owner.posts.delete_all(title: { '$regex' => '\Azzz' })
-      end.not_to raise_error
-
-      expect(load_query).not_to have_received(:each)
-    end
-
-    it 'runs no pattern against documents it never loaded' do
-      # The counterpart to the referenced-association examples below, where the
-      # documents are in memory and the pattern is run against every one of
-      # them. Here there is nothing to run it against, and the server applies
-      # the same selector for the delete, so nothing is missed by not looking.
-      expect(Mongoid::Matcher::RegexpBudget).not_to receive(:match?)
-
-      owner.posts.delete_all(title: { '$regex' => '\Azzz' })
-    end
-
-    it 'still removes the documents that match' do
-      expect(owner.posts.delete_all(title: { '$regex' => '\ATest' })).to eq(1)
-      expect(Post.count).to eq(0)
-      expect(owner.posts.size).to eq(0)
-    end
-  end
-
-  context 'when removing documents from a referenced association' do
-    config_override :in_memory_regexp_time_limit, nil
-
-    let!(:owner) { Person.create! }
-
-    before do
-      30.times { owner.posts.create!(title: slow_street) }
-      Mongoid::Config.in_memory_regexp_time_limit = calibrated_limit
-    end
-
-    it 'raises rather than scanning every loaded document' do
-      expect do
-        owner.posts.delete_all(title: { '$regex' => slow_pattern })
-      end.to raise_error(Mongoid::Errors::InMemoryRegexpTimeout)
-    end
-
-    it 'leaves the documents in place' do
-      expect do
-        owner.posts.delete_all(title: { '$regex' => slow_pattern })
-      end.to raise_error(Mongoid::Errors::InMemoryRegexpTimeout)
-
-      expect(Post.count).to eq(30)
-    end
-  end
-end