minigl 2.2.3 → 2.2.4

data/lib/minigl/text.rb

@@ -1,190 +1,190 @@
-module MiniGL
-  # This class provides methods for easily drawing one or multiple lines of
-  # text, with control over the text alignment and coloring.
-  class TextHelper
-    # Creates a TextHelper.
-    #
-    # Parameters:
-    # [font] A <code>Gosu::Font</code> that will be used to draw the text.
-    # [line_spacing] When drawing multiple lines, the distance, in pixels,
-    #                between each line.
-    def initialize(font, line_spacing = 0)
-      @font = font
-      @line_spacing = line_spacing
-    end
-
-    # Draws a single line of text.
-    #
-    # Parameters:
-    # [text] The text to be drawn. No line breaks are allowed. You can use the
-	#        `<b>` tag for bold, `<i>` for italic and `<c=rrggbb>` for colors.
-    # [x] The horizontal reference for drawing the text. If +mode+ is +:left+,
-    #     all text will be drawn from this point to the right; if +mode+ is
-    #     +:right+, all text will be drawn from this point to the left; and if
-    #     +mode+ is +:center+, the text will be equally distributed to the
-    #     left and to the right of this point.
-    # [y] The vertical reference for drawing the text. All text will be drawn
-    #     from this point down.
-    # [mode] The alignment of the text. Valid values are +:left+, +:right+ and
-    #        +:center+.
-    # [color] The color of the text, in hexadecimal RRGGBB format.
-    # [alpha] The opacity of the text. Valid values vary from 0 (fully
-    #         transparent) to 255 (fully opaque).
-    # [effect] Effect to add to the text. It can be either +nil+, for no effect,
-    #          +:border+ for bordered text, or +:shadow+ for shadowed text (the
-    #          shadow is always placed below and to the right of the text).
-    # [effect_color] Color of the effect, if any.
-    # [effect_size] Size of the effect, if any. In the case of +:border+, this
-    #               will be the width of the border (the border will only look
-    #               good when +effect_size+ is relatively small, compared to the
-    #               size of the font); in the case of +:shadow+, it will be the
-    #               distance between the text and the shadow.
-    # [effect_alpha] Opacity of the effect, if any. For shadows, it is usual to
-    #                provide less than 255.
-    # [z_index] The z-order to draw the object. Objects with larger z-orders
-    #           will be drawn on top of the ones with smaller z-orders.
-    #
-    # *Obs.:* This method accepts named parameters, but +text+, +x+ and +y+ are
-    # mandatory.
-    def write_line(text, x = nil, y = nil, mode = :left, color = 0, alpha = 0xff,
-                   effect = nil, effect_color = 0, effect_size = 1, effect_alpha = 0xff,
-                   z_index = 0)
-      if text.is_a? Hash
-        x = text[:x]
-        y = text[:y]
-        mode = text.fetch(:mode, :left)
-        color = text.fetch(:color, 0)
-        alpha = text.fetch(:alpha, 0xff)
-        effect = text.fetch(:effect, nil)
-        effect_color = text.fetch(:effect_color, 0)
-        effect_size = text.fetch(:effect_size, 1)
-        effect_alpha = text.fetch(:effect_alpha, 0xff)
-        z_index = text.fetch(:z_index, 0)
-        text = text[:text]
-      end
-
-      color = (alpha << 24) | color
-      rel =
-        case mode
-        when :left then 0
-        when :center then 0.5
-        when :right then 1
-        else 0
-        end
-      if effect
-        effect_color = (effect_alpha << 24) | effect_color
-        if effect == :border
-          @font.draw_markup_rel text, x - effect_size, y - effect_size, z_index, rel, 0, 1, 1, effect_color
-          @font.draw_markup_rel text, x, y - effect_size, z_index, rel, 0, 1, 1, effect_color
-          @font.draw_markup_rel text, x + effect_size, y - effect_size, z_index, rel, 0, 1, 1, effect_color
-          @font.draw_markup_rel text, x + effect_size, y, z_index, rel, 0, 1, 1, effect_color
-          @font.draw_markup_rel text, x + effect_size, y + effect_size, z_index, rel, 0, 1, 1, effect_color
-          @font.draw_markup_rel text, x, y + effect_size, z_index, rel, 0, 1, 1, effect_color
-          @font.draw_markup_rel text, x - effect_size, y + effect_size, z_index, rel, 0, 1, 1, effect_color
-          @font.draw_markup_rel text, x - effect_size, y, z_index, rel, 0, 1, 1, effect_color
-        elsif effect == :shadow
-          @font.draw_markup_rel text, x + effect_size, y + effect_size, z_index, rel, 0, 1, 1, effect_color
-        end
-      end
-      @font.draw_markup_rel text, x, y, z_index, rel, 0, 1, 1, color
-    end
-
-    # Draws text, breaking lines when needed and when explicitly caused by the
-    # "\n" character.
-    #
-    # Parameters:
-    # [text] The text to be drawn. Line breaks are allowed. You can use the
-	#        `<b>` tag for bold, `<i>` for italic and `<c=rrggbb>` for colors.
-    # [x] The horizontal reference for drawing the text. Works like in
-    #     +write_line+ for the +:left+, +:right+ and +:center+ modes. For the
-    #     +:justified+ mode, works the same as for +:left+.
-    # [y] The vertical reference for drawing the text. All text will be drawn
-    #     from this point down.
-    # [width] The maximum width for the lines of text. Line is broken when
-    #         this width is exceeded.
-    # [mode] The alignment of the text. Valid values are +:left+, +:right+,
-    #        +:center+ and +:justified+.
-    # [color] The color of the text, in hexadecimal RRGGBB format.
-    # [alpha] The opacity of the text. Valid values vary from 0 (fully
-    #         transparent) to 255 (fully opaque).
-    # [z_index] The z-order to draw the object. Objects with larger z-orders
-    #           will be drawn on top of the ones with smaller z-orders.
-    def write_breaking(text, x, y, width, mode = :left, color = 0, alpha = 0xff, z_index = 0)
-      color = (alpha << 24) | color
-      text.split("\n").each do |p|
-        if mode == :justified
-          y = write_paragraph_justified p, x, y, width, color, z_index
-        else
-          rel =
-            case mode
-            when :left then 0
-            when :center then 0.5
-            when :right then 1
-            else 0
-            end
-          y = write_paragraph p, x, y, width, rel, color, z_index
-        end
-      end
-    end
-
-  private
-
-    def write_paragraph(text, x, y, width, rel, color, z_index)
-      line = ''
-      line_width = 0
-      text.split(' ').each do |word|
-        w = @font.markup_width word
-        if line_width + w > width
-          @font.draw_markup_rel line.chop, x, y, z_index, rel, 0, 1, 1, color
-          line = ''
-          line_width = 0
-          y += @font.height + @line_spacing
-        end
-        line += "#{word} "
-        line_width += @font.markup_width "#{word} "
-      end
-      @font.draw_markup_rel line.chop, x, y, z_index, rel, 0, 1, 1, color unless line.empty?
-      y + @font.height + @line_spacing
-    end
-
-    def write_paragraph_justified(text, x, y, width, color, z_index)
-      space_width = @font.text_width ' '
-      spaces = [[]]
-      line_index = 0
-      new_x = x
-      words = text.split(' ')
-      words.each do |word|
-        w = @font.markup_width word
-        if new_x + w > x + width
-          space = x + width - new_x + space_width
-          index = 0
-          while space > 0
-            spaces[line_index][index] += 1
-            space -= 1
-            index += 1
-            index = 0 if index == spaces[line_index].size - 1
-          end
-
-          spaces << []
-          line_index += 1
-
-          new_x = x
-        end
-        new_x += @font.markup_width(word) + space_width
-        spaces[line_index] << space_width
-      end
-
-      index = 0
-      spaces.each do |line|
-        new_x = x
-        line.each do |s|
-          @font.draw_markup words[index], new_x, y, z_index, 1, 1, color
-          new_x += @font.markup_width(words[index]) + s
-          index += 1
-        end
-        y += @font.height + @line_spacing
-      end
-      y
-    end
-  end
-end
+module MiniGL
+  # This class provides methods for easily drawing one or multiple lines of
+  # text, with control over the text alignment and coloring.
+  class TextHelper
+    # Creates a TextHelper.
+    #
+    # Parameters:
+    # [font] A <code>Gosu::Font</code> that will be used to draw the text.
+    # [line_spacing] When drawing multiple lines, the distance, in pixels,
+    #                between each line.
+    def initialize(font, line_spacing = 0)
+      @font = font
+      @line_spacing = line_spacing
+    end
+
+    # Draws a single line of text.
+    #
+    # Parameters:
+    # [text] The text to be drawn. No line breaks are allowed. You can use the
+	#        `<b>` tag for bold, `<i>` for italic and `<c=rrggbb>` for colors.
+    # [x] The horizontal reference for drawing the text. If +mode+ is +:left+,
+    #     all text will be drawn from this point to the right; if +mode+ is
+    #     +:right+, all text will be drawn from this point to the left; and if
+    #     +mode+ is +:center+, the text will be equally distributed to the
+    #     left and to the right of this point.
+    # [y] The vertical reference for drawing the text. All text will be drawn
+    #     from this point down.
+    # [mode] The alignment of the text. Valid values are +:left+, +:right+ and
+    #        +:center+.
+    # [color] The color of the text, in hexadecimal RRGGBB format.
+    # [alpha] The opacity of the text. Valid values vary from 0 (fully
+    #         transparent) to 255 (fully opaque).
+    # [effect] Effect to add to the text. It can be either +nil+, for no effect,
+    #          +:border+ for bordered text, or +:shadow+ for shadowed text (the
+    #          shadow is always placed below and to the right of the text).
+    # [effect_color] Color of the effect, if any.
+    # [effect_size] Size of the effect, if any. In the case of +:border+, this
+    #               will be the width of the border (the border will only look
+    #               good when +effect_size+ is relatively small, compared to the
+    #               size of the font); in the case of +:shadow+, it will be the
+    #               distance between the text and the shadow.
+    # [effect_alpha] Opacity of the effect, if any. For shadows, it is usual to
+    #                provide less than 255.
+    # [z_index] The z-order to draw the object. Objects with larger z-orders
+    #           will be drawn on top of the ones with smaller z-orders.
+    #
+    # *Obs.:* This method accepts named parameters, but +text+, +x+ and +y+ are
+    # mandatory.
+    def write_line(text, x = nil, y = nil, mode = :left, color = 0, alpha = 0xff,
+                   effect = nil, effect_color = 0, effect_size = 1, effect_alpha = 0xff,
+                   z_index = 0)
+      if text.is_a? Hash
+        x = text[:x]
+        y = text[:y]
+        mode = text.fetch(:mode, :left)
+        color = text.fetch(:color, 0)
+        alpha = text.fetch(:alpha, 0xff)
+        effect = text.fetch(:effect, nil)
+        effect_color = text.fetch(:effect_color, 0)
+        effect_size = text.fetch(:effect_size, 1)
+        effect_alpha = text.fetch(:effect_alpha, 0xff)
+        z_index = text.fetch(:z_index, 0)
+        text = text[:text]
+      end
+
+      color = (alpha << 24) | color
+      rel =
+        case mode
+        when :left then 0
+        when :center then 0.5
+        when :right then 1
+        else 0
+        end
+      if effect
+        effect_color = (effect_alpha << 24) | effect_color
+        if effect == :border
+          @font.draw_markup_rel text, x - effect_size, y - effect_size, z_index, rel, 0, 1, 1, effect_color
+          @font.draw_markup_rel text, x, y - effect_size, z_index, rel, 0, 1, 1, effect_color
+          @font.draw_markup_rel text, x + effect_size, y - effect_size, z_index, rel, 0, 1, 1, effect_color
+          @font.draw_markup_rel text, x + effect_size, y, z_index, rel, 0, 1, 1, effect_color
+          @font.draw_markup_rel text, x + effect_size, y + effect_size, z_index, rel, 0, 1, 1, effect_color
+          @font.draw_markup_rel text, x, y + effect_size, z_index, rel, 0, 1, 1, effect_color
+          @font.draw_markup_rel text, x - effect_size, y + effect_size, z_index, rel, 0, 1, 1, effect_color
+          @font.draw_markup_rel text, x - effect_size, y, z_index, rel, 0, 1, 1, effect_color
+        elsif effect == :shadow
+          @font.draw_markup_rel text, x + effect_size, y + effect_size, z_index, rel, 0, 1, 1, effect_color
+        end
+      end
+      @font.draw_markup_rel text, x, y, z_index, rel, 0, 1, 1, color
+    end
+
+    # Draws text, breaking lines when needed and when explicitly caused by the
+    # "\n" character.
+    #
+    # Parameters:
+    # [text] The text to be drawn. Line breaks are allowed. You can use the
+	#        `<b>` tag for bold, `<i>` for italic and `<c=rrggbb>` for colors.
+    # [x] The horizontal reference for drawing the text. Works like in
+    #     +write_line+ for the +:left+, +:right+ and +:center+ modes. For the
+    #     +:justified+ mode, works the same as for +:left+.
+    # [y] The vertical reference for drawing the text. All text will be drawn
+    #     from this point down.
+    # [width] The maximum width for the lines of text. Line is broken when
+    #         this width is exceeded.
+    # [mode] The alignment of the text. Valid values are +:left+, +:right+,
+    #        +:center+ and +:justified+.
+    # [color] The color of the text, in hexadecimal RRGGBB format.
+    # [alpha] The opacity of the text. Valid values vary from 0 (fully
+    #         transparent) to 255 (fully opaque).
+    # [z_index] The z-order to draw the object. Objects with larger z-orders
+    #           will be drawn on top of the ones with smaller z-orders.
+    def write_breaking(text, x, y, width, mode = :left, color = 0, alpha = 0xff, z_index = 0)
+      color = (alpha << 24) | color
+      text.split("\n").each do |p|
+        if mode == :justified
+          y = write_paragraph_justified p, x, y, width, color, z_index
+        else
+          rel =
+            case mode
+            when :left then 0
+            when :center then 0.5
+            when :right then 1
+            else 0
+            end
+          y = write_paragraph p, x, y, width, rel, color, z_index
+        end
+      end
+    end
+
+  private
+
+    def write_paragraph(text, x, y, width, rel, color, z_index)
+      line = ''
+      line_width = 0
+      text.split(' ').each do |word|
+        w = @font.markup_width word
+        if line_width + w > width
+          @font.draw_markup_rel line.chop, x, y, z_index, rel, 0, 1, 1, color
+          line = ''
+          line_width = 0
+          y += @font.height + @line_spacing
+        end
+        line += "#{word} "
+        line_width += @font.markup_width "#{word} "
+      end
+      @font.draw_markup_rel line.chop, x, y, z_index, rel, 0, 1, 1, color unless line.empty?
+      y + @font.height + @line_spacing
+    end
+
+    def write_paragraph_justified(text, x, y, width, color, z_index)
+      space_width = @font.text_width ' '
+      spaces = [[]]
+      line_index = 0
+      new_x = x
+      words = text.split(' ')
+      words.each do |word|
+        w = @font.markup_width word
+        if new_x + w > x + width
+          space = x + width - new_x + space_width
+          index = 0
+          while space > 0
+            spaces[line_index][index] += 1
+            space -= 1
+            index += 1
+            index = 0 if index == spaces[line_index].size - 1
+          end
+
+          spaces << []
+          line_index += 1
+
+          new_x = x
+        end
+        new_x += @font.markup_width(word) + space_width
+        spaces[line_index] << space_width
+      end
+
+      index = 0
+      spaces.each do |line|
+        new_x = x
+        line.each do |s|
+          @font.draw_markup words[index], new_x, y, z_index, 1, 1, color
+          new_x += @font.markup_width(words[index]) + s
+          index += 1
+        end
+        y += @font.height + @line_spacing
+      end
+      y
+    end
+  end
+end

data/test/data/img/barbg.svg

@@ -1,73 +1,73 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   width="204"
-   height="24"
-   id="svg2"
-   version="1.1"
-   inkscape:version="0.48.4 r9939"
-   sodipodi:docname="barbg.svg"
-   inkscape:export-filename="/home/victor/Projects/TCC/minigl/test/data/img/barbg.png"
-   inkscape:export-xdpi="90"
-   inkscape:export-ydpi="90">
-  <defs
-     id="defs4" />
-  <sodipodi:namedview
-     id="base"
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1.0"
-     inkscape:pageopacity="0.0"
-     inkscape:pageshadow="2"
-     inkscape:zoom="4"
-     inkscape:cx="127.40358"
-     inkscape:cy="-8.2431265"
-     inkscape:document-units="px"
-     inkscape:current-layer="layer1"
-     showgrid="false"
-     inkscape:window-width="1364"
-     inkscape:window-height="718"
-     inkscape:window-x="0"
-     inkscape:window-y="0"
-     inkscape:window-maximized="1" />
-  <metadata
-     id="metadata7">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title></dc:title>
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-  <g
-     inkscape:label="Layer 1"
-     inkscape:groupmode="layer"
-     id="layer1"
-     transform="translate(0,-1028.3622)">
-    <rect
-       style="fill:#ffffff;fill-opacity:1;stroke:none"
-       id="rect3753"
-       width="204"
-       height="24"
-       x="0"
-       y="1028.3622" />
-    <rect
-       style="fill:#ff0000;fill-opacity:1;stroke:none"
-       id="rect3755"
-       width="200"
-       height="20"
-       x="2"
-       y="1030.3622" />
-  </g>
-</svg>
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   width="204"
+   height="24"
+   id="svg2"
+   version="1.1"
+   inkscape:version="0.48.4 r9939"
+   sodipodi:docname="barbg.svg"
+   inkscape:export-filename="/home/victor/Projects/TCC/minigl/test/data/img/barbg.png"
+   inkscape:export-xdpi="90"
+   inkscape:export-ydpi="90">
+  <defs
+     id="defs4" />
+  <sodipodi:namedview
+     id="base"
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1.0"
+     inkscape:pageopacity="0.0"
+     inkscape:pageshadow="2"
+     inkscape:zoom="4"
+     inkscape:cx="127.40358"
+     inkscape:cy="-8.2431265"
+     inkscape:document-units="px"
+     inkscape:current-layer="layer1"
+     showgrid="false"
+     inkscape:window-width="1364"
+     inkscape:window-height="718"
+     inkscape:window-x="0"
+     inkscape:window-y="0"
+     inkscape:window-maximized="1" />
+  <metadata
+     id="metadata7">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <g
+     inkscape:label="Layer 1"
+     inkscape:groupmode="layer"
+     id="layer1"
+     transform="translate(0,-1028.3622)">
+    <rect
+       style="fill:#ffffff;fill-opacity:1;stroke:none"
+       id="rect3753"
+       width="204"
+       height="24"
+       x="0"
+       y="1028.3622" />
+    <rect
+       style="fill:#ff0000;fill-opacity:1;stroke:none"
+       id="rect3755"
+       width="200"
+       height="20"
+       x="2"
+       y="1030.3622" />
+  </g>
+</svg>