mack-active_record 0.8.2 → 0.8.3

data/lib/gems/activesupport-2.2.2/lib/active_support/vendor/tzinfo-0.3.12/tzinfo/timezone_period.rb

@@ -1,198 +0,0 @@
-#--
-# Copyright (c) 2005-2006 Philip Ross
-# 
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-# 
-# The above copyright notice and this permission notice shall be included in all
-# copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#++
-
-require 'tzinfo/offset_rationals'
-require 'tzinfo/time_or_datetime'
-
-module TZInfo
-  # A period of time in a timezone where the same offset from UTC applies.
-  #
-  # All the methods that take times accept instances of Time, DateTime or
-  # integer timestamps.
-  class TimezonePeriod
-    # The TimezoneTransitionInfo that defines the start of this TimezonePeriod 
-    # (may be nil if unbounded).
-    attr_reader :start_transition
-    
-    # The TimezoneTransitionInfo that defines the end of this TimezonePeriod
-    # (may be nil if unbounded).
-    attr_reader :end_transition
-    
-    # The TimezoneOffsetInfo for this period.
-    attr_reader :offset    
-    
-    # Initializes a new TimezonePeriod.
-    def initialize(start_transition, end_transition, offset = nil)
-      @start_transition = start_transition
-      @end_transition = end_transition
-      
-      if offset
-        raise ArgumentError, 'Offset specified with transitions' if @start_transition || @end_transition
-        @offset = offset
-      else
-        if @start_transition 
-          @offset = @start_transition.offset
-        elsif @end_transition
-          @offset = @end_transition.previous_offset
-        else
-          raise ArgumentError, 'No offset specified and no transitions to determine it from'
-        end
-      end
-      
-      @utc_total_offset_rational = nil      
-    end
-            
-    # Base offset of the timezone from UTC (seconds).
-    def utc_offset
-      @offset.utc_offset
-    end
-    
-    # Offset from the local time where daylight savings is in effect (seconds).
-    # E.g.: utc_offset could be -5 hours. Normally, std_offset would be 0. 
-    # During daylight savings, std_offset would typically become +1 hours.
-    def std_offset
-      @offset.std_offset
-    end
-    
-    # The identifier of this period, e.g. "GMT" (Greenwich Mean Time) or "BST"
-    # (British Summer Time) for "Europe/London". The returned identifier is a 
-    # symbol.
-    def abbreviation
-      @offset.abbreviation
-    end
-    alias :zone_identifier :abbreviation
-    
-    # Total offset from UTC (seconds). Equal to utc_offset + std_offset.
-    def utc_total_offset
-      @offset.utc_total_offset
-    end
-    
-    # Total offset from UTC (days). Result is a Rational.
-    def utc_total_offset_rational
-      unless @utc_total_offset_rational
-        @utc_total_offset_rational = OffsetRationals.rational_for_offset(utc_total_offset) 
-      end
-      @utc_total_offset_rational
-    end
-    
-    # The start time of the period in UTC as a DateTime. May be nil if unbounded.
-    def utc_start
-      @start_transition ? @start_transition.at.to_datetime : nil
-    end
-    
-    # The end time of the period in UTC as a DateTime. May be nil if unbounded.
-    def utc_end
-      @end_transition ? @end_transition.at.to_datetime : nil
-    end
-    
-    # The start time of the period in local time as a DateTime. May be nil if 
-    # unbounded.
-    def local_start
-      @start_transition ? @start_transition.local_start.to_datetime : nil
-    end
-    
-    # The end time of the period in local time as a DateTime. May be nil if 
-    # unbounded.
-    def local_end
-      @end_transition ? @end_transition.local_end.to_datetime : nil
-    end
-    
-    # true if daylight savings is in effect for this period; otherwise false.
-    def dst?
-      @offset.dst?
-    end
-    
-    # true if this period is valid for the given UTC DateTime; otherwise false.
-    def valid_for_utc?(utc)
-      utc_after_start?(utc) && utc_before_end?(utc) 
-    end
-    
-    # true if the given UTC DateTime is after the start of the period 
-    # (inclusive); otherwise false.
-    def utc_after_start?(utc)
-      !@start_transition || @start_transition.at <= utc
-    end
-    
-    # true if the given UTC DateTime is before the end of the period 
-    # (exclusive); otherwise false.
-    def utc_before_end?(utc)
-      !@end_transition || @end_transition.at > utc
-    end
-    
-    # true if this period is valid for the given local DateTime; otherwise false.
-    def valid_for_local?(local)      
-      local_after_start?(local) && local_before_end?(local) 
-    end
-    
-    # true if the given local DateTime is after the start of the period 
-    # (inclusive); otherwise false.
-    def local_after_start?(local)
-      !@start_transition || @start_transition.local_start <= local
-    end
-    
-    # true if the given local DateTime is before the end of the period 
-    # (exclusive); otherwise false.
-    def local_before_end?(local)
-      !@end_transition || @end_transition.local_end > local
-    end
-    
-    # Converts a UTC DateTime to local time based on the offset of this period.
-    def to_local(utc)
-      @offset.to_local(utc)
-    end
-    
-    # Converts a local DateTime to UTC based on the offset of this period.
-    def to_utc(local)
-      @offset.to_utc(local)
-    end
-    
-    # Returns true if this TimezonePeriod is equal to p. This compares the 
-    # start_transition, end_transition and offset using ==.
-    def ==(p)
-      p.respond_to?(:start_transition) && p.respond_to?(:end_transition) &&
-        p.respond_to?(:offset) && start_transition == p.start_transition &&
-        end_transition == p.end_transition && offset == p.offset
-    end
-    
-    # Returns true if this TimezonePeriods is equal to p. This compares the
-    # start_transition, end_transition and offset using eql?
-    def eql?(p)
-      p.respond_to?(:start_transition) && p.respond_to?(:end_transition) &&
-        p.respond_to?(:offset) && start_transition.eql?(p.start_transition) &&
-        end_transition.eql?(p.end_transition) && offset.eql?(p.offset)
-    end
-    
-    # Returns a hash of this TimezonePeriod.
-    def hash
-      result = @start_transition.hash ^ @end_transition.hash
-      result ^= @offset.hash unless @start_transition || @end_transition
-      result       
-    end
-    
-    # Returns internal object state as a programmer-readable string.
-    def inspect
-      result = "#<#{self.class}: #{@start_transition.inspect},#{@end_transition.inspect}"
-      result << ",#{@offset.inspect}>" unless @start_transition || @end_transition
-      result + '>'
-    end
-  end
-end

data/lib/gems/activesupport-2.2.2/lib/active_support/vendor/tzinfo-0.3.12/tzinfo/timezone_transition_info.rb

@@ -1,129 +0,0 @@
-#--
-# Copyright (c) 2006 Philip Ross
-# 
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-# 
-# The above copyright notice and this permission notice shall be included in all
-# copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#++
-
-require 'date'
-require 'tzinfo/time_or_datetime'
-
-module TZInfo
-  # Represents an offset defined in a Timezone data file.
-  class TimezoneTransitionInfo #:nodoc:
-    # The offset this transition changes to (a TimezoneOffsetInfo instance).
-    attr_reader :offset
-    
-    # The offset this transition changes from (a TimezoneOffsetInfo instance).
-    attr_reader :previous_offset
-    
-    # The numerator of the DateTime if the transition time is defined as a 
-    # DateTime, otherwise the transition time as a timestamp.
-    attr_reader :numerator_or_time
-    protected :numerator_or_time
-    
-    # Either the denominotor of the DateTime if the transition time is defined
-    # as a DateTime, otherwise nil. 
-    attr_reader :denominator
-    protected :denominator
-    
-    # Creates a new TimezoneTransitionInfo with the given offset, 
-    # previous_offset (both TimezoneOffsetInfo instances) and UTC time. 
-    # if denominator is nil, numerator_or_time is treated as a number of 
-    # seconds since the epoch. If denominator is specified numerator_or_time
-    # and denominator are used to create a DateTime as follows:
-    # 
-    #  DateTime.new!(Rational.send(:new!, numerator_or_time, denominator), 0, Date::ITALY)
-    #
-    # For performance reasons, the numerator and denominator must be specified
-    # in their lowest form.
-    def initialize(offset, previous_offset, numerator_or_time, denominator = nil)
-      @offset = offset
-      @previous_offset = previous_offset
-      @numerator_or_time = numerator_or_time
-      @denominator = denominator
-      
-      @at = nil
-      @local_end = nil
-      @local_start = nil
-    end
-    
-    # A TimeOrDateTime instance representing the UTC time when this transition
-    # occurs.
-    def at
-      unless @at
-        unless @denominator 
-          @at = TimeOrDateTime.new(@numerator_or_time)
-        else
-          r = RubyCoreSupport.rational_new!(@numerator_or_time, @denominator)
-          dt = RubyCoreSupport.datetime_new!(r, 0, Date::ITALY)
-          @at = TimeOrDateTime.new(dt)
-        end
-      end
-      
-      @at
-    end
-    
-    # A TimeOrDateTime instance representing the local time when this transition
-    # causes the previous observance to end (calculated from at using 
-    # previous_offset).
-    def local_end
-      @local_end = at.add_with_convert(@previous_offset.utc_total_offset) unless @local_end      
-      @local_end
-    end
-    
-    # A TimeOrDateTime instance representing the local time when this transition
-    # causes the next observance to start (calculated from at using offset).
-    def local_start
-      @local_start = at.add_with_convert(@offset.utc_total_offset) unless @local_start
-      @local_start
-    end
-    
-    # Returns true if this TimezoneTransitionInfo is equal to the given
-    # TimezoneTransitionInfo. Two TimezoneTransitionInfo instances are 
-    # considered to be equal by == if offset, previous_offset and at are all 
-    # equal.
-    def ==(tti)
-      tti.respond_to?(:offset) && tti.respond_to?(:previous_offset) && tti.respond_to?(:at) &&
-        offset == tti.offset && previous_offset == tti.previous_offset && at == tti.at
-    end
-    
-    # Returns true if this TimezoneTransitionInfo is equal to the given
-    # TimezoneTransitionInfo. Two TimezoneTransitionInfo instances are 
-    # considered to be equal by eql? if offset, previous_offset, 
-    # numerator_or_time and denominator are all equal. This is stronger than ==,
-    # which just requires the at times to be equal regardless of how they were
-    # originally specified.
-    def eql?(tti)
-      tti.respond_to?(:offset) && tti.respond_to?(:previous_offset) &&
-        tti.respond_to?(:numerator_or_time) && tti.respond_to?(:denominator) &&
-        offset == tti.offset && previous_offset == tti.previous_offset &&
-        numerator_or_time == tti.numerator_or_time && denominator == tti.denominator        
-    end
-    
-    # Returns a hash of this TimezoneTransitionInfo instance.
-    def hash
-      @offset.hash ^ @previous_offset.hash ^ @numerator_or_time.hash ^ @denominator.hash
-    end
-    
-    # Returns internal object state as a programmer-readable string.
-    def inspect
-      "#<#{self.class}: #{at.inspect},#{@offset.inspect}>"      
-    end
-  end
-end

data/lib/gems/activesupport-2.2.2/lib/active_support/vendor/tzinfo-0.3.12/tzinfo.rb

@@ -1,33 +0,0 @@
-#--
-# Copyright (c) 2005-2006 Philip Ross
-# 
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-# 
-# The above copyright notice and this permission notice shall be included in all
-# copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#++
-
-# Add the directory containing this file to the start of the load path if it
-# isn't there already.
-$:.unshift(File.dirname(__FILE__)) unless
-  $:.include?(File.dirname(__FILE__)) || $:.include?(File.expand_path(File.dirname(__FILE__)))
-
-require 'tzinfo/timezone'
-# require 'tzinfo/country'
-# require 'tzinfo/tzdataparser'
-# require 'tzinfo/timezone_proxy'
-require 'tzinfo/data_timezone'
-require 'tzinfo/linked_timezone'