mack-active_record 0.8.2 → 0.8.3

data/lib/gems/activesupport-2.2.2/lib/active_support/vendor/tzinfo-0.3.12/tzinfo/time_or_datetime.rb

@@ -1,292 +0,0 @@
-#--
-# Copyright (c) 2006 Philip Ross
-# 
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-# 
-# The above copyright notice and this permission notice shall be included in all
-# copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#++
-
-require 'date'
-require 'time'
-require 'tzinfo/offset_rationals'
-
-module TZInfo
-  # Used by TZInfo internally to represent either a Time, DateTime or integer
-  # timestamp (seconds since 1970-01-01 00:00:00).
-  class TimeOrDateTime #:nodoc:
-    include Comparable
-    
-    # Constructs a new TimeOrDateTime. timeOrDateTime can be a Time, DateTime
-    # or an integer. If using a Time or DateTime, any time zone information is 
-    # ignored.
-    def initialize(timeOrDateTime)
-      @time = nil
-      @datetime = nil
-      @timestamp = nil
-      
-      if timeOrDateTime.is_a?(Time)
-        @time = timeOrDateTime        
-        @time = Time.utc(@time.year, @time.mon, @time.mday, @time.hour, @time.min, @time.sec) unless @time.zone == 'UTC'        
-        @orig = @time
-      elsif timeOrDateTime.is_a?(DateTime)
-        @datetime = timeOrDateTime
-        @datetime = @datetime.new_offset(0) unless @datetime.offset == 0
-        @orig = @datetime
-      else
-        @timestamp = timeOrDateTime.to_i
-        @orig = @timestamp
-      end
-    end
-    
-    # Returns the time as a Time.
-    def to_time
-      unless @time        
-        if @timestamp 
-          @time = Time.at(@timestamp).utc
-        else
-          @time = Time.utc(year, mon, mday, hour, min, sec)
-        end
-      end
-      
-      @time      
-    end
-    
-    # Returns the time as a DateTime.
-    def to_datetime
-      unless @datetime
-        @datetime = DateTime.new(year, mon, mday, hour, min, sec)
-      end
-      
-      @datetime
-    end
-    
-    # Returns the time as an integer timestamp.
-    def to_i
-      unless @timestamp
-        @timestamp = to_time.to_i
-      end
-      
-      @timestamp
-    end
-    
-    # Returns the time as the original time passed to new.
-    def to_orig
-      @orig
-    end
-    
-    # Returns a string representation of the TimeOrDateTime.
-    def to_s
-      if @orig.is_a?(Time)
-        "Time: #{@orig.to_s}"
-      elsif @orig.is_a?(DateTime)
-        "DateTime: #{@orig.to_s}"
-      else
-        "Timestamp: #{@orig.to_s}"
-      end
-    end
-    
-    # Returns internal object state as a programmer-readable string.
-    def inspect
-      "#<#{self.class}: #{@orig.inspect}>"
-    end
-    
-    # Returns the year.
-    def year
-      if @time
-        @time.year
-      elsif @datetime
-        @datetime.year
-      else
-        to_time.year
-      end
-    end
-    
-    # Returns the month of the year (1..12).
-    def mon
-      if @time
-        @time.mon
-      elsif @datetime
-        @datetime.mon
-      else
-        to_time.mon
-      end
-    end
-    alias :month :mon
-    
-    # Returns the day of the month (1..n).
-    def mday
-      if @time
-        @time.mday
-      elsif @datetime
-        @datetime.mday
-      else
-        to_time.mday
-      end
-    end
-    alias :day :mday
-    
-    # Returns the hour of the day (0..23).
-    def hour
-      if @time
-        @time.hour
-      elsif @datetime
-        @datetime.hour
-      else
-        to_time.hour
-      end
-    end
-    
-    # Returns the minute of the hour (0..59).
-    def min
-      if @time
-        @time.min
-      elsif @datetime
-        @datetime.min
-      else
-        to_time.min
-      end
-    end
-    
-    # Returns the second of the minute (0..60). (60 for a leap second).
-    def sec
-      if @time
-        @time.sec
-      elsif @datetime
-        @datetime.sec
-      else
-        to_time.sec
-      end
-    end
-    
-    # Compares this TimeOrDateTime with another Time, DateTime, integer
-    # timestamp or TimeOrDateTime. Returns -1, 0 or +1 depending whether the 
-    # receiver is less than, equal to, or greater than timeOrDateTime.
-    #
-    # Milliseconds and smaller units are ignored in the comparison.
-    def <=>(timeOrDateTime)
-      if timeOrDateTime.is_a?(TimeOrDateTime)            
-        orig = timeOrDateTime.to_orig
-        
-        if @orig.is_a?(DateTime) || orig.is_a?(DateTime)
-          # If either is a DateTime, assume it is there for a reason 
-          # (i.e. for range).
-          to_datetime <=> timeOrDateTime.to_datetime
-        elsif orig.is_a?(Time)
-          to_time <=> timeOrDateTime.to_time
-        else
-          to_i <=> timeOrDateTime.to_i
-        end        
-      elsif @orig.is_a?(DateTime) || timeOrDateTime.is_a?(DateTime)
-        # If either is a DateTime, assume it is there for a reason 
-        # (i.e. for range).        
-        to_datetime <=> TimeOrDateTime.wrap(timeOrDateTime).to_datetime
-      elsif timeOrDateTime.is_a?(Time)
-        to_time <=> timeOrDateTime
-      else
-        to_i <=> timeOrDateTime.to_i
-      end
-    end
-    
-    # Adds a number of seconds to the TimeOrDateTime. Returns a new 
-    # TimeOrDateTime, preserving what the original constructed type was.
-    # If the original type is a Time and the resulting calculation goes out of
-    # range for Times, then an exception will be raised by the Time class.
-    def +(seconds)
-      if seconds == 0
-        self
-      else
-        if @orig.is_a?(DateTime)
-          TimeOrDateTime.new(@orig + OffsetRationals.rational_for_offset(seconds))
-        else
-          # + defined for Time and integer timestamps
-          TimeOrDateTime.new(@orig + seconds)
-        end
-      end
-    end
-    
-    # Subtracts a number of seconds from the TimeOrDateTime. Returns a new 
-    # TimeOrDateTime, preserving what the original constructed type was.
-    # If the original type is a Time and the resulting calculation goes out of
-    # range for Times, then an exception will be raised by the Time class.
-    def -(seconds)
-      self + (-seconds)
-    end
-   
-    # Similar to the + operator, but for cases where adding would cause a 
-    # timestamp or time to go out of the allowed range, converts to a DateTime
-    # based TimeOrDateTime.
-    def add_with_convert(seconds)
-      if seconds == 0
-        self
-      else
-        if @orig.is_a?(DateTime)
-          TimeOrDateTime.new(@orig + OffsetRationals.rational_for_offset(seconds))
-        else
-          # A Time or timestamp.
-          result = to_i + seconds
-          
-          if result < 0 || result > 2147483647
-            result = TimeOrDateTime.new(to_datetime + OffsetRationals.rational_for_offset(seconds))
-          else
-            result = TimeOrDateTime.new(@orig + seconds)
-          end
-        end
-      end
-    end
-    
-    # Returns true if todt represents the same time and was originally 
-    # constructed with the same type (DateTime, Time or timestamp) as this 
-    # TimeOrDateTime.
-    def eql?(todt)
-      todt.respond_to?(:to_orig) && to_orig.eql?(todt.to_orig)      
-    end
-    
-    # Returns a hash of this TimeOrDateTime.
-    def hash
-      @orig.hash
-    end
-    
-    # If no block is given, returns a TimeOrDateTime wrapping the given 
-    # timeOrDateTime. If a block is specified, a TimeOrDateTime is constructed
-    # and passed to the block. The result of the block must be a TimeOrDateTime.
-    # to_orig will be called on the result and the result of to_orig will be
-    # returned.
-    #
-    # timeOrDateTime can be a Time, DateTime, integer timestamp or TimeOrDateTime.
-    # If a TimeOrDateTime is passed in, no new TimeOrDateTime will be constructed,
-    # the passed in value will be used.
-    def self.wrap(timeOrDateTime)      
-      t = timeOrDateTime.is_a?(TimeOrDateTime) ? timeOrDateTime : TimeOrDateTime.new(timeOrDateTime)        
-      
-      if block_given?
-        t = yield t
-        
-        if timeOrDateTime.is_a?(TimeOrDateTime)
-          t          
-        elsif timeOrDateTime.is_a?(Time)
-          t.to_time
-        elsif timeOrDateTime.is_a?(DateTime)
-          t.to_datetime
-        else
-          t.to_i
-        end        
-      else
-        t
-      end
-    end
-  end
-end