RubyGems - logstash-output-scalyr - Versions diffs - 0.1.5 → 0.1.6 - Mend

logstash-output-scalyr 0.1.5 → 0.1.6

Files changed (723) hide show

data/vendor/bundle/jruby/2.5.0/gems/net-http-persistent-3.0.1/test/test_net_http_persistent_timed_stack_multi.rb DELETED Viewed

@@ -1,151 +0,0 @@
-require 'minitest/autorun'
-require 'net/http/persistent'
-class TestNetHttpPersistentTimedStackMulti < Minitest::Test
-  class Connection
-    attr_reader :host
-    def initialize(host)
-      @host = host
-    end
-  end
-  def setup
-    @stack = Net::HTTP::Persistent::TimedStackMulti.new { Object.new }
-  end
-  def test_empty_eh
-    stack = Net::HTTP::Persistent::TimedStackMulti.new(1) { Object.new }
-    refute_empty stack
-    popped = stack.pop
-    assert_empty stack
-    stack.push connection_args: popped
-    refute_empty stack
-  end
-  def test_length
-    stack = Net::HTTP::Persistent::TimedStackMulti.new(1) { Object.new }
-    assert_equal 1, stack.length
-    popped = stack.pop
-    assert_equal 0, stack.length
-    stack.push connection_args: popped
-    assert_equal 1, stack.length
-  end
-  def test_pop
-    object = Object.new
-    @stack.push object
-    popped = @stack.pop
-    assert_same object, popped
-  end
-  def test_pop_empty
-    e = assert_raises Timeout::Error do
-      @stack.pop timeout: 0
-    end
-    assert_equal 'Waited 0 sec', e.message
-  end
-  def test_pop_full
-    stack = Net::HTTP::Persistent::TimedStackMulti.new(1) { Object.new }
-    popped = stack.pop
-    refute_nil popped
-    assert_empty stack
-  end
-  def test_pop_wait
-    thread = Thread.start do
-      @stack.pop
-    end
-    Thread.pass while thread.status == 'run'
-    object = Object.new
-    @stack.push object
-    assert_same object, thread.value
-  end
-  def test_pop_shutdown
-    @stack.shutdown { }
-    assert_raises ConnectionPool::PoolShuttingDownError do
-      @stack.pop
-    end
-  end
-  def test_push
-    stack = Net::HTTP::Persistent::TimedStackMulti.new(1) { Object.new }
-    conn = stack.pop
-    stack.push connection_args: conn
-    refute_empty stack
-  end
-  def test_push_shutdown
-    called = []
-    @stack.shutdown do |object|
-      called << object
-    end
-    @stack.push connection_args: Object.new
-    refute_empty called
-    assert_empty @stack
-  end
-  def test_shutdown
-    @stack.push connection_args: Object.new
-    called = []
-    @stack.shutdown do |object|
-      called << object
-    end
-    refute_empty called
-    assert_empty @stack
-  end
-  def test_pop_recycle
-    stack = Net::HTTP::Persistent::TimedStackMulti.new(2) { |host| Connection.new(host) }
-    a_conn = stack.pop connection_args: 'a.example'
-    stack.push a_conn, connection_args: 'a.example'
-    b_conn = stack.pop connection_args: 'b.example'
-    stack.push b_conn, connection_args: 'b.example'
-    c_conn = stack.pop connection_args: 'c.example'
-    assert_equal 'c.example', c_conn.host
-    stack.push c_conn, connection_args: 'c.example'
-    recreated = stack.pop connection_args: 'a.example'
-    refute_same a_conn, recreated
-  end
-end

data/vendor/bundle/jruby/2.5.0/gems/rake-13.0.1/CONTRIBUTING.rdoc DELETED Viewed

@@ -1,43 +0,0 @@
-= Source Repository
-Rake is currently hosted at github. The github web page is
-https://github.com/ruby/rake . The public git clone URL is
-  https://github.com/ruby/rake.git
-= Running the Rake Test Suite
-If you wish to run the unit and functional tests that come with Rake:
-* +cd+ into the top project directory of rake.
-* Install gem dependency using bundler:
-    $ bundle install  # Install bundler, minitest and rdoc
-* Run the test suite
-    $ rake
-= Rubocop
-Rake uses Rubocop to enforce a consistent style on new changes being
-proposed. You can check your code with Rubocop using:
-  $ ./bin/rubocop
-= Issues and Bug Reports
-Feel free to submit commits or feature requests.  If you send a patch,
-remember to update the corresponding unit tests.  In fact, I prefer
-new feature to be submitted in the form of new unit tests.
-For other information, feel free to ask on the ruby-talk mailing list.
-If you have found a bug in rake please try with the latest version of rake
-before filing an issue.  Also check History.rdoc for bug fixes that may have
-addressed your issue.
-When submitting pull requests please check the rake Travis-CI page for test
-failures:
-  https://travis-ci.org/ruby/rake

data/vendor/bundle/jruby/2.5.0/gems/rake-13.0.1/Gemfile DELETED Viewed

@@ -1,10 +0,0 @@
-source "https://rubygems.org"
-gemspec
-group :development do
-  gem "bundler"
-  gem "minitest"
-  gem "coveralls"
-  gem "rubocop"
-end

data/vendor/bundle/jruby/2.5.0/gems/rake-13.0.1/History.rdoc DELETED Viewed

@@ -1,2368 +0,0 @@
-=== 13.0.1
-==== Bug fixes
-* Fixed bug: Reenabled task raises previous exception on second invokation
-  Pull Request #271 by thorsteneckel
-* Fix an incorrectly resolved arg pattern
-  Pull Request #327 by mjbellantoni
-=== 13.0.0
-==== Enhancements
-* Follows recent changes on keyword arguments in ruby 2.7.
-  Pull Request #326 by nobu
-* Make `PackageTask` be able to omit parent directory while packing files
-  Pull Request #310 by tonytonyjan
-* Add order only dependency
-  Pull Request #269 by take-cheeze
-==== Compatibility changes
-* Drop old ruby versions(< 2.2)
-=== 12.3.3
-==== Bug fixes
-* Use the application's name in error message if a task is not found.
-  Pull Request #303 by tmatilai
-==== Enhancements:
-* Use File.open explicitly.
-=== 12.3.2
-==== Bug fixes
-* Fixed test fails caused by 2.6 warnings.
-  Pull Request #297 by hsbt
-==== Enhancements:
-* Rdoc improvements.
-  Pull Request #293 by colby-swandale
-* Improve multitask performance.
-  Pull Request #273 by jsm
-* Add alias `prereqs`.
-  Pull Request #268 by take-cheeze
-=== 12.3.1
-==== Bug fixes
-* Support did_you_mean >= v1.2.0 which has a breaking change on formatters.
-  Pull request #262 by FUJI Goro.
-==== Enhancements:
-* Don't run task if it depends on already invoked but failed task.
-  Pull request #252 by Gonzalo Rodriguez.
-* Make space trimming consistent for all task arguments.
-  Pull request #259 by Gonzalo Rodriguez.
-* Removes duplicated inclusion of Rake::DSL in tests.
-  Pull request #254 by Gonzalo Rodriguez.
-* Re-raise a LoadError that didn't come from require in the test loader.
-  Pull request #250 by Dylan Thacker-Smith.
-=== 12.3.0
-==== Compatibility Changes
-* Bump `required_ruby_version` to Ruby 2.0.0. Rake has already
-  removed support for Ruby 1.9.x.
-==== Enhancements:
-* Support `test-bundled-gems` task on ruby core.
-=== 12.2.1
-==== Bug fixes
-* Fixed to break Capistrano::Application on capistrano3.
-=== 12.2.0
-==== Enhancements:
-* Make rake easier to use as a library
-  Pull request #211 by @drbrain
-* Fix quadratic performance in FileTask#out_of_date?
-  Pull request #224 by @doudou
-* Clarify output when printing nested exception traces
-  Pull request #232 by @urbanautomaton
-==== Bug fixes
-* Account for a file that match 2 or more patterns.
-  Pull request #231 by @styd
-=== 12.1.0
-==== Enhancements:
-* Added did_you_mean feature for invalid rake task.
-  Pull request #221 by @xtina-starr
-* Enabled to dependency chained by extensions. Pull request #39 by Petr Skocik.
-* Make all of string literals to frozen objects on Ruby 2.4 or later.
-==== Bug fixes
-* Typo fixes in rakefile.rdoc. Pull request #180 by Yuta Kurotaki.
-* Fix unexpected behavior of file task with dryrun option.
-  Pull request #183 by @aycabta.
-* Make LoadError from running tests more obvious. Pull request #195
-  by Eric Hodel.
-* Fix unexpected TypeError with hash style option. Pull request #202
-  by Kuniaki IGARASHI.
-=== 12.0.0
-==== Compatibility Changes
-* Removed arguments on clear #157 by Jesse Bowes
-* Removed `rake/contrib` packages. These are extracted to `rake-contrib` gem.
-* Removed deprecated method named `last\_comment`.
-==== Enhancements:
-* Re-use trace option on `cleanup` task. #164 by Brian Henderson
-* Actions adore keyword arguments #174 by Josh Cheek
-* Rake::TaskArguments#key? alias of #has_key? #175 by Paul Annesley
-=== 11.3.0 / 2016-09-20
-==== Enhancements:
-* Remove to reference `Fixnum` constant. Pull request #160 by nobu
-=== 11.2.2 / 2016-06-12
-==== Bug fixes
-* Fix unexpected behavior with multiple dependencies on Rake::TestTask
-=== 11.2.1 / 2016-06-12
-==== Bug fixes
-* Fix regression of dependencies handling on Rake::TestTask. Report #139
-=== 11.2.0 / 2016-06-11
-==== Bug fixes
-* Fix unexpected cut-out behavior on task description using triple dots
-  and exclamation. Report #106 from Stephan Kämper and Pull request #134 by Lee
-* Fix empty argument assignment with `with_defaults` option. Pull request #135
-  by bakunyo
-* Ignore to use `hwprefs` on Darwin platform. Use sysctl now. Report #128
-==== Enhancements
-* Spawn options for sh Pull equest #138 by Eric Hodel.
-* Allow to specify dependencies(prerequisites) for Rake::TestTask
-  Pull request #117 by Tim Maslyuchenko
-* Use Bundler task instead of hoe for gem release.
-* Remove explicitly load to rubygems for Ruby 1.8.
-* Unify to declare `Rake::VERSION`.
-* Support xz format for PackageTask.
-=== 11.1.2 / 2016-03-28
-==== Bug fixes
-* Remove `-W` option when Rake::TestTask#verbose enabled. It's misunderstanding
-  specification change with Rake 11. Partly revert #67
-=== 11.1.1 / 2016-03-14
-==== Bug fixes
-* Use `-W` instead of `--verbose` when Rake::TestTask#verbose enabled.
-  JRuby doesn't have `--verbose` option.
-=== 11.1.0 / 2016-03-11
-==== Compatibility Changes
-* Revert to remove `last\_comment`. It will remove Rake 12.
-=== 11.0.1 / 2016-03-09
-==== Bug fixes
-* Fixed packaging manifest.
-=== 11.0.0 / 2016-03-09
-==== Bug fixes
-* Correctly handle bad encoding in exception messages. Pull request #113
-  by Tomer Brisker
-* Fix verbose option at TestTask. Pull request #67 by Mike Blumtritt
-==== Enhancements
-* Make FileList#exclude more analogous to FileList#include.
-* Use IO.open instead of Open3.popen3 for CPU counter.
-* Make Rake::Task#already_invoked publicly accessible.
-  Pull request #93 by Joe Rafaniello
-* Lookup prerequisites with same name outside of scope instead of
-  matching self. Pull request #96 by Sandy Vanderbleek
-* Make FileList#pathmap behave like String#pathmap.
-  Pull request #61 by Daniel Tamai
-* Add fetch method to task arguments.
-  Pull request #12 by Chris Keathley
-* Use ruby warnings by default. Pull request #97 by Harold Giménez
-==== Compatibility Changes
-* Removed to support Ruby 1.8.x
-* Removed constant named `RAKEVERSION`
-* Removed Rake::AltSystem
-* Removed Rake::RubyForgePublisher
-* Removed Rake::TaskManager#last\_comment. Use last\_description.
-* Removed Rake::TaskLib#paste
-* Removed Top-level SshDirPublisher, SshFreshDirPublisher, SshFilePublisher
-  and CompositePublisher from lib/rake/contrib/publisher.rb
-* Removed "rake/runtest.rb"
-=== 10.5.0 / 2016-01-13
-==== Enhancements
-* Removed monkey patching for Ruby 1.8. Pull request #46 by Pablo Herrero.
-* Inheritance class of Rake::FileList returns always self class.
-  Pull request #74 by Thomas Scholz
-=== 10.4.2 / 2014-12-02
-==== Bug fixes
-* Rake no longer edits ARGV.  This allows you to re-exec rake from a rake
-  task.  Pull requset #9 by Matt Palmer.
-* Documented how Rake::DSL#desc handles sentences in task descriptions.
-  Issue #7 by Raza Sayed.
-* Fixed test error on 1.9.3 with legacy RubyGems.  Issue #8 by Matt Palmer.
-* Deleted duplicated History entry.  Pull request #10 by Yuji Yamamoto.
-=== 10.4.1 / 2014-12-01
-==== Bug fixes
-* Reverted fix for #277 as it caused numerous issues for rake users.
-  rails/spring issue #366 by Gustavo Dutra.
-=== 10.4.0 / 2014-11-22
-==== Enhancements
-* Upgraded to minitest 5.  Pull request #292 by Teo Ljungberg.
-* Added support for Pathname in rake tasks.  Pull request #271 by Randy
-  Coulman.
-* Rake now ignores falsy dependencies which allows for easier programmatic
-  creation of tasks.  Pull request #273 by Manav.
-* Rake no longer edits ARGV.  This allows you to re-exec rake from a rake
-  task.  Issue #277 by Matt Palmer.
-* Etc.nprocessors is used for counting the number of CPUs.
-==== Bug fixes
-* Updated rake manpage.  Issue #283 by Nathan Long, pull request #291 by
-  skittleys.
-* Add Rake::LATE to allow rebuilding of files that depend on deleted files.
-  Bug #286, pull request #287 by David Grayson.
-* Fix relinking of files when repackaging.  Bug #276 by Muenze.
-* Fixed some typos.  Pull request #280 by Jed Northridge.
-* Try counting CPUs via cpuinfo if host_os was not matched.  Pull request
-  #282 by Edouard B.
-=== 10.3.2 / 2014-05-15
-==== Bug fixes
-* Rake no longer infinitely loops when showing exception causes that refer to
-  each other.  Bug #272 by Chris Bandy.
-* Fixed documentation typos.  Bug #275 by Jake Worth.
-=== 10.3.1 / 2014-04-17
-==== Bug fixes
-* Really stop reporting an error when cleaning already-deleted files.  Pull
-  request #269 by Randy Coulman
-* Fixed infinite loop when cleaning already-deleted files on windows.
-=== 10.3 / 2014-04-15
-==== Enhancements
-* Added --build-all option to rake which treats all file prerequisites as
-  out-of-date.  Pull request #254 by Andrew Gilbert.
-* Added Rake::NameSpace#scope.  Issue #263 by Jon San Miguel.
-==== Bug fixes
-* Suppress org.jruby package files in rake error messages for JRuby users.
-  Issue #213 by Charles Nutter.
-* Fixed typo, removed extra "h".  Pull request #267 by Hsing-Hui Hsu.
-* Rake no longer reports an error when cleaning already-deleted files.  Pull
-  request #266 by Randy Coulman.
-* Consume stderr while determining CPU count to avoid hang.  Issue #268 by
-  Albert Sun.
-=== 10.2.2 / 2014-03-27
-==== Bug fixes
-* Restored Ruby 1.8.7 compatibility
-=== 10.2.1 / 2014-03-25
-==== Bug fixes
-* File tasks including a ':' are now top-level tasks again.  Issue #262 by
-  Josh Holtrop.
-* Use sysctl for CPU count for all BSDs.  Pull request #261 by Joshua Stein.
-* Fixed CPU detection for unknown platforms.
-=== 10.2.0 / 2014-03-24
-==== Enhancements
-* Rake now requires Ruby 1.9 or newer.  For me, this is a breaking change, but
-  it seems that Jim planned to release it with Rake 10.2.  See also pull
-  request #247 by Philip Arndt.
-* Rake now allows you to declare tasks under a namespace like:
-    task 'a:b' do ... end
-  Pull request #232 by Judson Lester.
-* Task#source defaults to the first prerequisite in non-rule tasks.  Pull
-  request #215 by Avdi Grimm.
-* Rake now automatically rebuilds and reloads imported files.  Pull request
-  #209 by Randy Coulman.
-* The rake task arguments can contain escaped commas.  Pull request #214 by
-  Filip Hrbek.
-* Rake now prints the exception class on errors.  Patch #251 by David Cornu.
-==== Bug fixes
-* Fixed typos.  Pull request #256 by Valera Rozuvan, #250 via Jake Worth, #260
-  by Zachary Scott.
-* Fixed documentation for calling tasks with arguments.  Pull request #235 by
-  John Varghese.
-* Clarified `rake -f` usage message.  Pull request #252 by Marco Pfatschbacher.
-* Fixed a test failure on windows.  Pull request #231 by Hiroshi Shirosaki.
-* Fixed corrupted rake.1.gz.  Pull request #225 by Michel Boaventura.
-* Fixed bug in can\_detect\_signals? in test.  Patch from #243 by Alexey
-  Borzenkov.
-=== 10.1.1
-* Use http://github.com/jimweirich/rake instead of http://rake.rubyforge.org for
-  canonical project url.
-=== 10.1.0
-==== Changes
-===== New Features
-* Add support for variable length task argument lists. If more actual
-  arguments are supplied than named arguments, then the extra
-  arguments values will be in args.extras.
-* Application name is not displayed in the help banner. (Previously
-  "rake" was hardcoded, now rake-based applications can display their
-  own names).
-===== Bug Fixes
-Bug fixes include:
-* Fix backtrace suppression issues.
-* Rules now explicit get task arguments passed to them.
-* Rename FileList#exclude? to FileList#exclude\_from\_list? to avoid
-  conflict with new Rails method.
-* Clean / Clobber tasks now report failure to remove files.
-* Plus heaps of internal code cleanup.
-==== Thanks
-As usual, it was input from users that drove a lot of these changes.
-The following people contributed patches, made suggestions or made
-otherwise helpful comments. Thanks to ...
-* Michael Nikitochkin (general code cleanup)
-* Vipul A M (general code cleanup)
-* Dennis Bell (variable length task argument lists)
-* Jacob Swanner (rules arguments)
-* Rafael Rosa Fu (documentation typo)
-* Stuart Nelson (install.rb fixes)
-* Lee Hambley (application name in help banner)
--- Jim Weirich
-=== 10.0.3
-  "Jim, when will Rake reach version 1.0?"
-Over the past several years I've been asked that question at
-conferences, panels and over twitter. Due to historical reasons (or
-maybe just plain laziness) Rake has (incorrectly) been treating the
-second digit of the version as the major release number. So in my head
-Rake was already at version 9.
-Well, it's time to fix things. This next version of Rake drops old,
-crufty, backwards compatibility hacks such as top level constants, DSL
-methods defined in Object and numerous other features that are just no
-longer desired. It's also time to drop the leading zero from the
-version number as well and call this new version of rake what it
-really is: Version 10.
-So, welcome to Rake 10.0!
-Rake 10 is actually feature identical to the latest version of Rake 9
-(that would be the version spelled 0.9.3), *except* that Rake 10 drops
-all the sundry deprecated features that have accumulated over the years.
-If your Rakefile is up to date and current with all the new features
-of Rake 10, you are ready to go. If your Rakefile still uses a few
-deprecated feeatures, feel free to use Rake 9 (0.9.3) with the same
-feature set. Just be aware that future features will be in Rake 10
-family line.
-==== Changes
-As mentioned above, there are no new features in Rake 10. However,
-there are a number of features missing:
-* Classic namespaces are now gone. Rake is no longer able to reflect
-  the options settings in the global variables ($rakefile, $show\_tasks,
-  $show\_prereqs, $trace, $dryrun and $silent). The
-  <tt>--classic-namespace</tt> option is no longer supported.
-* Global constants are no longer supported. This includes
-  <tt>Task</tt>, <tt>FileTask</tt>, <tt>FileCreationTask</tt> and
-  <tt>RakeApp</tt>). The constant missing hook to warn about using
-  global rake constants has been removed.
-* The Rake DSL methods (task, file, directory, etc) are in their own
-  module (Rake::DSL). The stub versions of these methods (that printed
-  warnings) in Object have been removed. However, the DSL methods are
-  added to the top-level <tt>main</tt> object. Since <tt>main</tt> is
-  not in the inheritance tree, the presence of the DSL methods in main
-  should be low impact on other libraries.
-  If you want to use the Rake DSL commands from your own code, just
-  include <tt>Rake::DSL</tt> into your own classes and modules.
-* The deprecated syntax for task arguments (the one using
-  <tt>:needs</tt>) has been removed.
-* The <tt>--reduce-compat</tt> flag has been removed (it's not needed
-  anymore).
-* The deprecated <tt>rake/sys.rb</tt> library has been removed.
-* The deprecated <tt>rake/rdoctask.rb</tt> library has been removed.
-  RDoc supplies its own rake task now.
-* The deprecated <tt>rake/gempackagetask.rb</tt> library has been
-  removed. Gem supplies its own package task now.
-There is one small behavioral change:
-* Non-file tasks now always report the current time as their time
-  stamp. This is different from the previous behavior where non-file
-  tasks reported current time only if there were no prerequisites, and
-  the max prerequisite timestamp otherwise. This lead to inconsistent
-  and surprising behavior when adding prerequisites to tasks that in
-  turn were prequisites to file tasks. The new behavior is more
-  consistent and predictable.
-==== Changes (from 0.9.3, 0.9.4, 0.9.5)
-Since Rake 10 includes the changes from the last version of Rake 9,
-we'll repeat the changes for versions 0.9.3 through 0.9.5 here.
-===== New Features (in 0.9.3)
-* Multitask tasks now use a thread pool. Use -j to limit the number of
-  available threads.
-* Use -m to turn regular tasks into multitasks (use at your own risk).
-* You can now do "Rake.add_rakelib 'dir'" in your Rakefile to
-  programatically add rake task libraries.
-* You can specific backtrace suppression patterns (see
-  --suppress-backtrace)
-* Directory tasks can now take prerequisites and actions
-* Use --backtrace to request a full backtrace without the task trace.
-* You can say "--backtrace=stdout" and "--trace=stdout" to route trace
-  output to standard output rather than standard error.
-* Optional 'phony' target (enable with 'require 'rake/phony'") for
-  special purpose builds.
-* Task#clear now clears task comments as well as actions and
-  prerequisites. Task#clear_comment will specifically target comments.
-* The --all option will force -T and -D to consider all the tasks,
-  with and without descriptions.
-===== Bug Fixes (in 0.9.3)
-* Semi-colons in windows rakefile paths now work.
-* Improved Control-C support when invoking multiple test suites.
-* egrep method now reads files in text mode (better support for
-  Windows)
-* Better deprecation line number reporting.
-* The -W option now works with all tasks, whether they have a
-  description or not.
-* File globs in rake should not be sorted alphabetically, independent
-  of file system and platform.
-* Numerous internal improvements.
-* Documentation typos and fixes.
-===== Bug Fixes (in 0.9.4)
-* Exit status with failing tests is not correctly set to non-zero.
-* Simplified syntax for phony task (for older versions of RDoc).
-* Stand alone FileList usage gets glob function (without loading in
-  extra dependencies)
-===== Bug Fixes (in 0.9.5)
-* --trace and --backtrace no longer swallow following task names.
-==== Thanks
-As usual, it was input from users that drove a lot of these changes. The
-following people contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-* Aaron Patterson
-* Dylan Smith
-* Jo Liss
-* Jonas Pfenniger
-* Kazuki Tsujimoto
-* Michael Bishop
-* Michael Elufimov
-* NAKAMURA Usaku
-* Ryan Davis
-* Sam Grönblom
-* Sam Phippen
-* Sergio Wong
-* Tay Ray Chuan
-* grosser
-* quix
-Also, many thanks to Eric Hodel for assisting with getting this release
-out the door.
--- Jim Weirich
-=== 10.0.2
-==== Changes
-===== Bug Fixes
-* --trace and --backtrace no longer swallow following task names.
-==== Thanks
-As usual, it was input from users that drove a lot of these changes. The
-following people contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-* Aaron Patterson
-* Dylan Smith
-* Jo Liss
-* Jonas Pfenniger
-* Kazuki Tsujimoto
-* Michael Bishop
-* Michael Elufimov
-* NAKAMURA Usaku
-* Ryan Davis
-* Sam Grönblom
-* Sam Phippen
-* Sergio Wong
-* Tay Ray Chuan
-* grosser
-* quix
-Also, many thanks to Eric Hodel for assisting with getting this release
-out the door.
--- Jim Weirich
-=== 10.0.1
-==== Changes
-===== Bug Fixes
-* Exit status with failing tests is not correctly set to non-zero.
-* Simplified syntax for phony task (for older versions of RDoc).
-* Stand alone FileList usage gets glob function (without loading in
-  extra dependencies)
-==== Thanks
-As usual, it was input from users that drove a lot of these changes. The
-following people contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-* Aaron Patterson
-* Dylan Smith
-* Jo Liss
-* Jonas Pfenniger
-* Kazuki Tsujimoto
-* Michael Bishop
-* Michael Elufimov
-* NAKAMURA Usaku
-* Ryan Davis
-* Sam Grönblom
-* Sam Phippen
-* Sergio Wong
-* Tay Ray Chuan
-* grosser
-* quix
-Also, many thanks to Eric Hodel for assisting with getting this release
-out the door.
--- Jim Weirich
-=== 10.0.0
-  "Jim, when will Rake reach version 1.0?"
-Over the past several years I've been asked that question at
-conferences, panels and over twitter. Due to historical reasons (or
-maybe just plain laziness) Rake has (incorrectly) been treating the
-second digit of the version as the major release number. So in my head
-Rake was already at version 9.
-Well, it's time to fix things. This next version of Rake drops old,
-crufty, backwards compatibility hacks such as top level constants, DSL
-methods defined in Object and numerous other features that are just no
-longer desired. It's also time to drop the leading zero from the
-version number as well and call this new version of rake what it
-really is: Version 10.
-So, welcome to Rake 10.0!
-Rake 10 is actually feature identical to the latest version of Rake 9
-(that would be the version spelled 0.9.3), *except* that Rake 10 drops
-all the sundry deprecated features that have accumulated over the years.
-If your Rakefile is up to date and current with all the new features
-of Rake 10, you are ready to go. If your Rakefile still uses a few
-deprecated feeatures, feel free to use Rake 9 (0.9.3) with the same
-feature set. Just be aware that future features will be in Rake 10
-family line.
-==== Changes in 10.0
-As mentioned above, there are no new features in Rake 10. However,
-there are a number of features missing:
-* Classic namespaces are now gone. Rake is no longer able to reflect
-  the options settings in the global variables ($rakefile, $show\_tasks,
-  $show\_prereqs, $trace, $dryrun and $silent). The
-  <tt>--classic-namespace</tt> option is no longer supported.
-* Global constants are no longer supported. This includes
-  <tt>Task</tt>, <tt>FileTask</tt>, <tt>FileCreationTask</tt> and
-  <tt>RakeApp</tt>). The constant missing hook to warn about using
-  global rake constants has been removed.
-* The Rake DSL methods (task, file, directory, etc) are in their own
-  module (Rake::DSL). The stub versions of these methods (that printed
-  warnings) in Object have been removed. However, the DSL methods are
-  added to the top-level <tt>main</tt> object. Since <tt>main</tt> is
-  not in the inheritance tree, the presence of the DSL methods in main
-  should be low impact on other libraries.
-  If you want to use the Rake DSL commands from your own code, just
-  include <tt>Rake::DSL</tt> into your own classes and modules.
-* The deprecated syntax for task arguments (the one using
-  <tt>:needs</tt>) has been removed.
-* The <tt>--reduce-compat</tt> flag has been removed (it's not needed
-  anymore).
-* The deprecated <tt>rake/sys.rb</tt> library has been removed.
-* The deprecated <tt>rake/rdoctask.rb</tt> library has been removed.
-  RDoc supplies its own rake task now.
-* The deprecated <tt>rake/gempackagetask.rb</tt> library has been
-  removed. Gem supplies its own package task now.
-There is one small behavioral change:
-* Non-file tasks now always report the current time as their time
-  stamp. This is different from the previous behavior where non-file
-  tasks reported current time only if there were no prerequisites, and
-  the max prerequisite timestamp otherwise. This lead to inconsistent
-  and surprising behavior when adding prerequisites to tasks that in
-  turn were prequisites to file tasks. The new behavior is more
-  consistent and predictable.
-==== Changes (from 0.9.3)
-Since Rake 10 includes the changes from the last version of Rake 9,
-we'll repeat the changes for version 0.9.3 here.
-===== New Features
-* Multitask tasks now use a thread pool. Use -j to limit the number of
-  available threads.
-* Use -m to turn regular tasks into multitasks (use at your own risk).
-* You can now do "Rake.add_rakelib 'dir'" in your Rakefile to
-  programatically add rake task libraries.
-* You can specific backtrace suppression patterns (see
-  --suppress-backtrace)
-* Directory tasks can now take prerequisites and actions
-* Use --backtrace to request a full backtrace without the task trace.
-* You can say "--backtrace=stdout" and "--trace=stdout" to route trace
-  output to standard output rather than standard error.
-* Optional 'phony' target (enable with 'require 'rake/phony'") for
-  special purpose builds.
-* Task#clear now clears task comments as well as actions and
-  prerequisites. Task#clear_comment will specifically target comments.
-* The --all option will force -T and -D to consider all the tasks,
-  with and without descriptions.
-===== Bug Fixes
-* Semi-colons in windows rakefile paths now work.
-* Improved Control-C support when invoking multiple test suites.
-* egrep method now reads files in text mode (better support for
-  Windows)
-* Better deprecation line number reporting.
-* The -W option now works with all tasks, whether they have a
-  description or not.
-* File globs in rake should not be sorted alphabetically, independent
-  of file system and platform.
-* Numerous internal improvements.
-* Documentation typos and fixes.
-==== Thanks
-As usual, it was input from users that drove a lot of these changes. The
-following people contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-* Aaron Patterson
-* Dylan Smith
-* Jo Liss
-* Jonas Pfenniger
-* Kazuki Tsujimoto
-* Michael Bishop
-* Michael Elufimov
-* NAKAMURA Usaku
-* Ryan Davis
-* Sam Grönblom
-* Sam Phippen
-* Sergio Wong
-* Tay Ray Chuan
-* grosser
-* quix
-Also, many thanks to Eric Hodel for assisting with getting this release
-out the door.
--- Jim Weirich
-=== 0.9.6
-Rake version 0.9.6 contains a number of fixes mainly for merging
-Rake into the Ruby source tree and fixing tests.
-==== Changes
-===== Bug Fixes (0.9.6)
-* Better trace output when using a multi-threaded Rakefile.
-* Arg parsing is now consistent for tasks and multitasks.
-* Skip exit code test in versions of Ruby that don't support it well.
-Changes for better integration with the Ruby source tree:
-* Fix version literal for Ruby source tree build.
-* Better loading of libraries for testing in Ruby build.
-* Use the ruby version provided by Ruby's tests.
-==== Thanks
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-* Aaron Patterson
-* Dylan Smith
-* Jo Liss
-* Jonas Pfenniger
-* Kazuki Tsujimoto
-* Michael Bishop
-* Michael Elufimov
-* NAKAMURA Usaku
-* Ryan Davis
-* Sam Grönblom
-* Sam Phippen
-* Sergio Wong
-* Tay Ray Chuan
-* grosser
-* quix
-Also, many thanks to Eric Hodel for assisting with getting this release
-out the door.
--- Jim Weirich
-=== 0.9.5
-Rake version 0.9.5 contains a number of bug fixes.
-==== Changes
-===== Bug Fixes (0.9.5)
-* --trace and --backtrace no longer swallow following task names.
-==== Thanks
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-* Aaron Patterson
-* Dylan Smith
-* Jo Liss
-* Jonas Pfenniger
-* Kazuki Tsujimoto
-* Michael Bishop
-* Michael Elufimov
-* NAKAMURA Usaku
-* Ryan Davis
-* Sam Grönblom
-* Sam Phippen
-* Sergio Wong
-* Tay Ray Chuan
-* grosser
-* quix
-Also, many thanks to Eric Hodel for assisting with getting this release
-out the door.
--- Jim Weirich
-=== 0.9.4
-Rake version 0.9.4 contains a number of bug fixes.
-==== Changes
-===== Bug Fixes (0.9.4)
-* Exit status with failing tests is not correctly set to non-zero.
-* Simplified syntax for phony task (for older versions of RDoc).
-* Stand alone FileList usage gets glob function (without loading in
-  extra dependencies)
-==== Thanks
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-* Aaron Patterson
-* Dylan Smith
-* Jo Liss
-* Jonas Pfenniger
-* Kazuki Tsujimoto
-* Michael Bishop
-* Michael Elufimov
-* NAKAMURA Usaku
-* Ryan Davis
-* Sam Grönblom
-* Sam Phippen
-* Sergio Wong
-* Tay Ray Chuan
-* grosser
-* quix
-Also, many thanks to Eric Hodel for assisting with getting this release
-out the door.
--- Jim Weirich
-=== 0.9.3
-Rake version 0.9.3 contains some new, backwards compatible features and
-a number of bug fixes.
-==== Changes
-===== New Features
-* Multitask tasks now use a thread pool. Use -j to limit the number of
-  available threads.
-* Use -m to turn regular tasks into multitasks (use at your own risk).
-* You can now do "Rake.add_rakelib 'dir'" in your Rakefile to
-  programatically add rake task libraries.
-* You can specific backtrace suppression patterns (see
-  --suppress-backtrace)
-* Directory tasks can now take prerequisites and actions
-* Use --backtrace to request a full backtrace without the task trace.
-* You can say "--backtrace=stdout" and "--trace=stdout" to route trace
-  output to standard output rather than standard error.
-* Optional 'phony' target (enable with 'require 'rake/phony'") for
-  special purpose builds.
-* Task#clear now clears task comments as well as actions and
-  prerequisites. Task#clear_comment will specifically target comments.
-* The --all option will force -T and -D to consider all the tasks,
-  with and without descriptions.
-===== Bug Fixes
-* Semi-colons in windows rakefile paths now work.
-* Improved Control-C support when invoking multiple test suites.
-* egrep method now reads files in text mode (better support for
-  Windows)
-* Better deprecation line number reporting.
-* The -W option now works with all tasks, whether they have a
-  description or not.
-* File globs in rake should not be sorted alphabetically, independent
-  of file system and platform.
-* Numerous internal improvements.
-* Documentation typos and fixes.
-==== Thanks
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-* Aaron Patterson
-* Dylan Smith
-* Jo Liss
-* Jonas Pfenniger
-* Kazuki Tsujimoto
-* Michael Bishop
-* Michael Elufimov
-* NAKAMURA Usaku
-* Ryan Davis
-* Sam Grönblom
-* Sam Phippen
-* Sergio Wong
-* Tay Ray Chuan
-* grosser
-* quix
-Also, many thanks to Eric Hodel for assisting with getting this release
-out the door.
--- Jim Weirich
-=== Rake 0.9.2.2
-Rake version 0.9.2.2 is mainly bug fixes.
-==== Changes
-* The rake test loader now removes arguments it has processed.  Issue #51
-* Rake::TaskArguments now responds to #values\_at
-* RakeFileUtils.verbose_flag = nil silences output the same as 0.8.7
-* Rake tests are now directory-independent
-* Rake tests are no longer require flexmock
-* Commands constant is no longer polluting top level namespace.
-* Show only the interesting portion of the backtrace by default (James M. Lawrence).
-* Added --reduce-compat option to remove backward compatible DSL hacks (James M. Lawrence).
-==== Thanks
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-* James M. Lawrence (quix)
-* Roger Pack
-* Cezary Baginski
-* Sean Scot August Moon
-* R.T. Lechow
-* Alex Chaffee
-* James Tucker
-* Matthias Lüdtke
-* Santiago Pastorino
-Also, bit thanks to Eric Hodel for assisting with getting this release
-out the door (where "assisting" includes, but is not by any means
-limited to, "pushing" me to get it done).
--- Jim Weirich
-=== 0.9.2
-Rake version 0.9.2 has a few small fixes.  See below for details.
-==== Changes
-* Support for Ruby 1.8.6 was fixed.
-* Global DSL warnings now honor --no-deprecate
-==== Thanks
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-* James M. Lawrence (quix)
-* Roger Pack
-* Cezary Baginski
-* Sean Scot August Moon
-* R.T. Lechow
-* Alex Chaffee
-* James Tucker
-* Matthias Lüdtke
-* Santiago Pastorino
-Also, bit thanks to Eric Hodel for assisting with getting this release
-out the door (where "assisting" includes, but is not by any means
-limited to, "pushing" me to get it done).
--- Jim Weirich
-=== 0.9.1
-Rake version 0.9.1 has a number of bug fixes and enhancments (see
-below for more details).  Additionally, the internals have be slightly
-restructured and improved.
-==== Changes
-Rake 0.9.1 adds back the global DSL methods, but with deprecation
-messages.  This allows Rake 0.9.1 to be used with older rakefiles with
-warning messages.
-==== Thanks
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-* James M. Lawrence (quix)
-* Roger Pack
-* Cezary Baginski
-* Sean Scot August Moon
-* R.T. Lechow
-* Alex Chaffee
-* James Tucker
-* Matthias Lüdtke
-* Santiago Pastorino
-Also, bit thanks to Eric Hodel for assisting with getting this release
-out the door (where "assisting" includes, but is not by any means
-limited to, "pushing" me to get it done).
--- Jim Weirich
-=== 0.9.0
-Rake version 0.9.0 has a number of bug fixes and enhancments (see
-below for more details).  Additionally, the internals have be slightly
-restructured and improved.
-==== Changes
-===== New Features / Enhancements / Bug Fixes in Version 0.9.0
-* Rake now warns when the deprecated :needs syntax used (and suggests
-  the proper syntax in the warning).
-* Moved Rake DSL commands to top level ruby object 'main'.  Rake DSL
-  commands are no longer private methods in Object. (Suggested by
-  James M. Lawrence/quix)
-* Rake now uses case-insensitive comparisons to find the Rakefile on Windows.
-  Based on patch by Roger Pack.
-* Rake now requires (instead of loads) files in the test task.  Patch by Cezary
-  Baginski.
-* Fixed typos.  Patches by Sean Scot August Moon and R.T. Lechow.
-* Rake now prints the Rakefile directory only when it's different from the
-  current directory.  Patch by Alex Chaffee.
-* Improved rakefile_location discovery on Windows.  Patch by James Tucker.
-* Rake now recognizes "Windows Server" as a windows system.  Patch by Matthias
-  Lüdtke
-* Rake::RDocTask is deprecated.  Use RDoc::Task from RDoc 2.4.2+ (require
-  'rdoc/task')
-* Rake::GemPackageTask is deprecated.  Use Gem::PackageTask (require
-  'rubygems/package\_task')
-* Rake now outputs various messages to $stderr instead of $stdout.
-* Rake no longer emits warnings for Config.  Patch by Santiago Pastorino.
-* Removed Rake's DSL methods from the top level scope.  If you need to
-  call 'task :xzy' in your code, include Rake::DSL into your class, or
-  put the code in a Rake::DSL.environment do ... end block.
-* Split rake.rb into individual files.
-* Support for the --where (-W) flag for showing where a task is defined.
-* Fixed quoting in test task.
-  (http://onestepback.org/redmine/issues/show/44,
-  http://www.pivotaltracker.com/story/show/1223138)
-* Fixed the silent option parsing problem.
-  (http://onestepback.org/redmine/issues/show/47)
-* Fixed :verbose=>false flag on sh and ruby commands.
-* Rake command line options may be given by default in a RAKEOPT
-  environment variable.
-* Errors in Rake will now display the task invocation chain in effect
-  at the time of the error.
-* Accepted change by warnickr to not expand test patterns in shell
-  (allowing more files in the test suite).
-* Fixed that file tasks did not perform prereq lookups in scope
-  (Redmine #57).
-==== Thanks
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-* James M. Lawrence (quix)
-* Roger Pack
-* Cezary Baginski
-* Sean Scot August Moon
-* R.T. Lechow
-* Alex Chaffee
-* James Tucker
-* Matthias Lüdtke
-* Santiago Pastorino
-Also, bit thanks to Eric Hodel for assisting with getting this release
-out the door (where "assisting" includes, but is not by any means
-limited to, "pushing" me to get it done).
--- Jim Weirich
-=== 0.8.7
-Rake version 0.8.5 introduced greatly improved support for executing
-commands on Windows.  The "sh" command now has the same semantics on
-Windows that it has on Unix based platforms.
-Rake version 0.8.6 includes minor fixes the the RDoc generation.
-Rake version 0.8.7 includes a minor fix for JRuby running on windows.
-==== Changes
-===== New Features / Enhancements in Version 0.8.5
-* Improved implementation of the Rake system command for Windows.
-  (patch from James M. Lawrence/quix)
-* Support for Ruby 1.9's improved system command.  (patch from James
-  M. Lawrence/quix)
-* Rake now includes the configured extension when invoking an
-  executable (Config::CONFIG['EXEEXT])
-===== Bug Fixes in Version 0.8.5
-* Environment variable keys are now correctly cased (it matters in
-  some implementations).
-==== Thanks
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-* Charles Nutter
--- Jim Weirich
-=== 0.8.6
-Rake version 0.8.5 introduced greatly improved support for executing
-commands on Windows.  The "sh" command now has the same semantics on
-Windows that it has on Unix based platforms.
-Rake version 0.8.5 includes minor fixes the the RDoc generation.
-==== Thanks
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-* James M. Lawrence/quix
-* Luis Lavena
--- Jim Weirich
-=== 0.8.5
-Rake version 0.8.5 is a new release of Rake with greatly improved
-support for executing commands on Windows.  The "sh" command now has
-the same semantics on Windows that it has on Unix based platforms.
-==== Changes
-===== New Features / Enhancements in Version 0.8.5
-* Improved implementation of the Rake system command for Windows.
-  (patch from James M. Lawrence/quix)
-* Support for Ruby 1.9's improved system command.  (patch from James
-  M. Lawrence/quix)
-* Rake now includes the configured extension when invoking an
-  executable (Config::CONFIG['EXEEXT])
-===== Bug Fixes in Version 0.8.5
-* Environment variable keys are now correctly cased (it matters in
-  some implementations).
-==== Thanks
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-* James M. Lawrence/quix
-* Luis Lavena
--- Jim Weirich
-=== 0.8.4
-Rake version 0.8.4 is a bug-fix release of rake.
-NOTE: The version of Rake that comes with Ruby 1.9 has diverged
-      slightly from the core Rake code base.  Rake 0.8.4 will work
-      with Ruby 1.9, but is not a strict upgrade for the Rake that
-      comes with Ruby 1.9.  A (near) future release of Rake will unify
-      those two codebases.
-==== Letter Writing Campaign
-Thanks to Aaron Patterson (@tenderlove) and Eric Hodel (@drbrain) for
-their encouraging support in organizing a letter writing campaign to
-lobby for the "Warning Free" release of rake 0.8.4.  A special callout
-goes to Jonathan D. Lord, Sr (Dr. Wingnut) whose postcard was the
-first to actually reach me. (see
-http://tenderlovemaking.com/2009/02/26/we-need-a-new-version-of-rake/
-for details)
-==== Changes
-===== New Features / Enhancements in Version 0.8.4
-* Case is preserved on rakefile names. (patch from James
-  M. Lawrence/quix)
-* Improved Rakefile case insensitivity testing (patch from Luis
-  Lavena).
-* Windows system dir search order is now: HOME, HOMEDRIVE + HOMEPATH,
-  APPDATA, USERPROFILE (patch from Luis Lavena)
-* MingGW is now recognized as a windows platform.  (patch from Luis
-  Lavena)
-===== Bug Fixes in Version 0.8.4
-* Removed reference to manage_gem to fix the warning produced by the
-  gem package task.
-* Fixed stray ARGV option problem that was interfering with
-  Test::Unit::Runner. (patch from Pivotal Labs)
-===== Infrastructure Improvements in Version 0.8.4
-* Numerous fixes to the windows test suite (patch from Luis Lavena).
-* Improved Rakefile case insensitivity testing (patch from Luis
-  Lavena).
-* Better support for windows paths in the test task (patch from Simon
-  Chiang/bahuvrihi)
-==== Thanks
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-* James M. Lawrence/quix
-* Luis Lavena
-* Pivotal Labs
-* Simon Chiang/bahuvrihi
--- Jim Weirich
-=== 0.8.3
-Rake version 0.8.3 is a bug-fix release of rake.
-==== Changes
-===== Bug Fixes in Version 0.8.3
-* Enhanced the system directory detection in windows. We now check
-  HOMEDRIVE/HOMEPATH and USERPROFILE if APPDATA isn't found. (Patch
-  supplied by James Tucker). Rake no long aborts if it can't find the
-  directory.
-* Added fix to handle ruby installations in directories with spaces in
-  their name.
-==== Thanks
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-* Edwin Pratomo
-* Gavin Stark
-* Adam Q. Salter
-* Adam Majer
-* Emanuel Indermühle
-* Ittay Dror
-* Bheeshmar Redheendran (for spending an afternoon with me debugging
-  windows issues)
--- Jim Weirich
-=== 0.8.2
-Rake version 0.8.2 is a new release of rake that includes a number of
-new features and numerous bug fixes.
-==== Changes
-===== New Features in Version 0.8.2
-* Switched from getoptlong to optparse (patches supplied by Edwin
-  Pratomo).
-* The -T option will now attempt to dynamically sense the size of the
-  terminal. The -T output will only self-truncate if the output is a
-  tty. However, if RAKE_COLUMNS is explicitly set, it will be honored
-  in any case. (Patch provided by Gavin Stark).
-* The following public methods have been added to rake task objects:
-  * task.clear -- Clear both the prerequisites and actions of the
-    target rake task.
-  * task.clear_prerequisites -- Clear all the existing prerequisites
-    from the target rake task.
-  * task.clear_actions -- Clear all the existing actions from the
-    target rake task.
-  * task.reenable -- Re-enable a task, allowing its actions to be
-    executed again if the task is invoked.
-* Changed RDoc test task to have no default template. This makes it
-  easier for the tempate to pick up the template from the environment.
-* Default values for task arguments can easily be specified with the
-  :with_defaults method. (Idea for default argument merging supplied
-  by (Adam Q. Salter)
-===== Bug Fixes in Version 0.8.2
-* Fixed bug in package task so that it will include the subdir
-  directory in the package for testing. (Bug found by Adam Majer)
-* Fixed filename dependency order bug in test\_inspect\_pending and
-  test\_to\_s\_pending. (Bug found by Adam Majer)
-* Fixed check for file utils options to make them immune to the
-  symbol/string differences. (Patch supplied by Edwin Pratomo)
-* Fixed bug with rules involving multiple source, where only the first
-  dependency of a rule has any effect (Patch supplied by Emanuel
-  Indermühle)
-* FileList#clone and FileList#dup have better sematics w.r.t. taint
-  and freeze.
-* Changed from using Mutex to Monitor. Evidently Mutex causes thread
-  join errors when Ruby is compiled with -disable-pthreads. (Patch
-  supplied by Ittay Dror)
-* Fixed bug in makefile parser that had problems with extra spaces in
-  file task names. (Patch supplied by Ittay Dror)
-==== Other changes in Version 0.8.2
-* Added ENV var to rake's own Rakefile to prevent OS X from including
-  extended attribute junk in the rake package tar file. (Bug found by
-  Adam Majer)
-* Added a performance patch for reading large makefile dependency
-  files. (Patch supplied by Ittay Dror)
-==== Task Argument Examples
-Prior to version 0.8.0, rake was only able to handle command line
-arguments of the form NAME=VALUE that were passed into Rake via the
-ENV hash.  Many folks had asked for some kind of simple command line
-arguments, perhaps using "--" to separate regular task names from
-argument values on the command line.  The problem is that there was no
-easy way to associate positional arguments on the command line with
-different tasks.  Suppose both tasks :a and :b expect a command line
-argument: does the first value go with :a?  What if :b is run first?
-Should it then get the first command line argument.
-Rake 0.8.0 solves this problem by explicitly passing values directly
-to the tasks that need them.  For example, if I had a release task
-that required a version number, I could say:
-   rake release[0.8.2]
-And the string "0.8.2" will be passed to the :release task.  Multiple
-arguments can be passed by separating them with a comma, for example:
-   rake name[john,doe]
-Just a few words of caution.  The rake task name and its arguments
-need to be a single command line argument to rake.  This generally
-means no spaces.  If spaces are needed, then the entire rake +
-argument string should be quoted.  Something like this:
-   rake "name[billy bob, smith]"
-(Quoting rules vary between operating systems and shells, so make sure
-you consult the proper docs for your OS/shell).
-===== Tasks that Expect Parameters
-Parameters are only given to tasks that are setup to expect them.  In
-order to handle named parameters, the task declaration syntax for
-tasks has been extended slightly.
-For example, a task that needs a first name and last name might be
-declared as:
-   task :name, :first_name, :last_name
-The first argument is still the name of the task (:name in this case).
-The next to argumements are the names of the parameters expected by
-:name (:first_name and :last_name in the example).
-To access the values of the parameters, the block defining the task
-behaviour can now accept a second parameter:
-   task :name, :first_name, :last_name do |t, args|
-     puts "First name is #{args.first_name}"
-     puts "Last  name is #{args.last_name}"
-   end
-The first argument of the block "t" is always bound to the current
-task object.  The second argument "args" is an open-struct like object
-that allows access to the task arguments.  Extra command line
-arguments to a task are ignored.  Missing command line arguments are
-given the nil value.
-==== Thanks
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-* Edwin Pratomo
-* Gavin Stark
-* Adam Q. Salter
-* Adam Majer
-* Emanuel Indermühle
-* Ittay Dror
-* Bheeshmar Redheendran (for spending an afternoon with me debugging
-  windows issues)
--- Jim Weirich
-=== 0.8.0/0.8.1
-Rake version 0.8.0 is a new release of rake that includes serveral new
-features.
-==== Changes
-===== New Features in Version 0.8.0
-* Tasks can now receive command line parameters.  See the examples
-  below for more details.
-* Comments are limited to 80 columns on output, but full comments can
-  be seen by using the -D parameter. (feature suggested by Jamis
-  Buck).
-* Explicit exit(n) calls will now set the exit status to n. (patch
-  provided by Stephen Touset).
-* Rake is now compatible with Ruby 1.9.
-Version 0.8.1 is a minor update that includes additional Ruby 1.9
-compatibility fixes.
-==== Task Argument Examples
-Prior to version 0.8.0, rake was only able to handle command line
-arguments of the form NAME=VALUE that were passed into Rake via the
-ENV hash.  Many folks had asked for some kind of simple command line
-arguments, perhaps using "--" to separate regular task names from
-argument values on the command line.  The problem is that there was no
-easy way to associate positional arguments on the command line with
-different tasks.  Suppose both tasks :a and :b expect a command line
-argument: does the first value go with :a?  What if :b is run first?
-Should it then get the first command line argument.
-Rake 0.8.0 solves this problem by explicitly passing values directly
-to the tasks that need them.  For example, if I had a release task
-that required a version number, I could say:
-   rake release[0.8.0]
-And the string "0.8.0" will be passed to the :release task.  Multiple
-arguments can be passed by separating them with a comma, for example:
-   rake name[john,doe]
-Just a few words of caution.  The rake task name and its arguments
-need to be a single command line argument to rake.  This generally
-means no spaces.  If spaces are needed, then the entire rake +
-argument string should be quoted.  Something like this:
-   rake "name[billy bob, smith]"
-(Quoting rules vary between operating systems and shells, so make sure
-you consult the proper docs for your OS/shell).
-===== Tasks that Expect Parameters
-Parameters are only given to tasks that are setup to expect them.  In
-order to handle named parameters, the task declaration syntax for
-tasks has been extended slightly.
-For example, a task that needs a first name and last name might be
-declared as:
-   task :name, :first_name, :last_name
-The first argument is still the name of the task (:name in this case).
-The next to argumements are the names of the parameters expected by
-:name (:first_name and :last_name in the example).
-To access the values of the parameters, the block defining the task
-behaviour can now accept a second parameter:
-   task :name, :first_name, :last_name do |t, args|
-     puts "First name is #{args.first_name}"
-     puts "Last  name is #{args.last_name}"
-   end
-The first argument of the block "t" is always bound to the current
-task object.  The second argument "args" is an open-struct like object
-that allows access to the task arguments.  Extra command line
-arguments to a task are ignored.  Missing command line arguments are
-given the nil value.
-==== Thanks
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-* Jamis Buck (for comment formatting suggestions)
-* Stephen Touset (for exit status patch).
--- Jim Weirich
-=== 0.7.3
-Rake version 0.7.3 is a minor release that includes some refactoring to better
-support custom Rake applications.
-==== Changes
-===== New Features in Version 0.7.3
-* Added the +init+ and +top_level+ methods to make the creation of custom Rake applications a bit easier.  E.g.
-    gem 'rake', ">= 0.7.3"
-    require 'rake'
-    Rake.application.init('myrake')
-    task :default do
-      something_interesting
-    end
-    Rake.application.top_level
-==== Thanks
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments. Thanks to ...
--- Jim Weirich
-=== 0.7.2
-Version 0.7.2 supplies a bug fix and a few minor enhancements. In
-particular, the new version fixes an incompatibility with the soon to
-be released Ruby 1.8.6.  We strongly recommend upgrading to Rake 0.7.2
-in order to be compatible with the new version of Ruby.
-==== Changes
-===== Bug Fixes in 0.7.2
-There are quite a number of bug fixes in the new 0.7.2 version of
-Rake:
-* Removed dependency on internal fu_xxx functions from FileUtils.
-* Error messages are now send to stderr rather than stdout (from
-  Payton Quackenbush).
-* Better error handling on invalid command line arguments (from Payton
-  Quackenbush).
-* Fixed some bugs where the application object was going to the global
-  appliation instead of using its own data.
-* Fixed the method name leak from FileUtils (bug found by Glenn
-  Vanderburg).
-* Added test for noop, bad_option and verbose flags to sh command.
-* Added a description to the gem task in GemPackageTask.
-* Fixed a bug when rules have multiple prerequisites (patch by Joel
-  VanderWerf)
-* Added the handful of RakeFileUtils to the private method as well.
-===== New Features in 0.7.2
-The following new features are available in Rake version 0.7.2:
-* Added square and curly bracket patterns to FileList#include (Tilman
-  Sauerbeck).
-* FileLists can now pass a block to FileList#exclude to exclude files
-  based on calculated values.
-* Added plain filename support to rule dependents (suggested by Nobu
-  Nakada).
-* Added pathmap support to rule dependents.  In other words, if a
-  pathmap format (beginning with a '%') is given as a Rake rule
-  dependent, then the name of the depend will be the name of the
-  target with the pathmap format applied.
-* Added a 'tasks' method to a namespace to get a list of tasks
-  associated with the namespace.
-* Added tar_command and zip_command options to the Package task.
-* The clean task will no longer delete 'core' if it is a directory.
-===== Internal Rake Improvements
-The following changes will are mainly internal improvements and
-refactorings and have little effect on the end user.  But they may be
-of interest to the general public.
-* Added rcov task and updated unit testing for better code coverage.
-* Added a 'shame' task to the Rakefile.
-* Added rake_extension to handle detection of extension collisions.
-* Added a protected 'require "rubygems"' to test/test_application to
-  unbreak cruisecontrol.rb.
-* Removed rake\_dup.  Now we just simply rescue a bad dup.
-* Refactored the FileList reject logic to remove duplication.
-* Removed if \_\_FILE\_\_ at the end of the rake.rb file.
-==== Thanks
-As usual, it was input from users that drove a alot of these changes.
-The following people either contributed patches, made suggestions or
-made otherwise helpful comments.  Thanks to ...
-* Payton Quackenbush -- For several error handling improvements.
-* Glenn Vanderburg -- For finding and fixing the method name leak from
-  FileUtils.
-* Joel VanderWerf -- for finding and fixing a bug in the handling of
-  multiple prerequisites.
-* Tilman Sauerbeck -- For some enhancing FileList to support more
-  advanced file globbing.
-* Nobu Nakada -- For suggesting plain file name support to rule dependents.
--- Jim Weirich
-=== 0.7.1
-Version 0.7.1 supplies a bug fix and a few minor enhancements.
-==== Changes
-===== Bug Fixes in 0.7.1
-* Changes in the exception reported for the FileUtils.ln caused
-  safe_ln to fail with a NotImplementedError.  Rake 0.7.1 will now
-  catch that error or any StandardError and properly fall back to
-  using +cp+.
-===== New Features in 0.7.1
-* You can filter the results of the --task option by supplying an
-  optional regular expression.  This allows the user to easily find a
-  particular task name in a long list of possible names.
-* Transforming procs in a rule may now return a list of prerequisites.
-  This allows more flexible rule formation.
-* FileList and String now support a +pathmap+ melthod that makes the
-  transforming paths a bit easier.  See the API docs for +pathmap+ for
-  details.
-* The -f option without a value will disable the search for a
-  Rakefile.  This allows the Rakefile to be defined entirely in a
-  library (and loaded with the -r option).  The current working
-  directory is not changed when this is done.
-==== Thanks
-As usual, it was input from users that drove a alot of these changes.
-The following people either contributed patches, made suggestions or
-made otherwise helpful comments.  Thanks to ...
-* James Britt and Assaph Mehr for reporting and helping to debug the
-  safe_ln issue.
--- Jim Weirich
-=== 0.7.0
-These changes for Rake have been brewing for a long time.  Here they
-are, I hope you enjoy them.
-==== Changes
-===== New Features
-* Name space support for task names (see below).
-* Prerequisites can be executed in parallel (see below).
-* Added safe_ln support for openAFS (via Ludvig Omholt).
-* RDoc defaults to internal (in-process) invocation.  The old behavior
-  is still available by setting the +external+ flag to true.
-* Rakefiles are now loaded with the expanded path to prevent
-  accidental pollution from the Ruby load path.
-* Task objects my now be used in prerequisite lists directly.
-* Task objects (in addition to task names) may now be included in the
-  prerequisite list of a task.
-* Internals cleanup and refactoring.
-===== Bug Fixes
-* Compatibility fixes for Ruby 1.8.4 FileUtils changes.
-===== Namespaces
-Tasks can now be nested inside their own namespaces.  Tasks within one
-namespace will not accidentally interfer with tasks named in a different
-namespace.
-For example:
-  namespace "main" do
-    task :build do
-      # Build the main program
-    end
-  end
-  namespace "samples" do
-    task :build do
-      # Build the sample programs
-    end
-  end
-  task :build_all => ["main:build", "samples:build"]
-Even though both tasks are named :build, they are separate tasks in
-their own namespaces.  The :build_all task (defined in the toplevel
-namespace) references both build tasks in its prerequisites.
-You may invoke each of the individual build tasks with the following
-commands:
-  rake main:build
-  rake samples:build
-Or invoke both via the :build_all command:
-  rake build_all
-Namespaces may be nested arbitrarily.  Since the name of file tasks
-correspond to the name of a file in the external file system,
-FileTasks are not affected by the namespaces.
-See the Rakefile format documentation (in the Rake API documents) for
-more information.
-===== Parallel Tasks
-Sometimes you have several tasks that can be executed in parallel.  By
-specifying these tasks as prerequisites to a +multitask+ task.
-In the following example the tasks copy\_src, copy\_doc and copy\_bin
-will all execute in parallel in their own thread.
-  multitask :copy_files => [:copy_src, :copy_doc, :copy_bin] do
-    puts "All Copies Complete"
-  end
-==== Thanks
-As usual, it was input from users that drove a alot of these changes.
-The following people either contributed patches, made suggestions or
-made otherwise helpful comments.  Thanks to ...
-* Doug Young (inspiration for the parallel task)
-* David Heinemeier Hansson (for --trace message enhancement and for
-  pushing for namespace support).
-* Ludvig Omholt (for the openAFS fix)
--- Jim Weirich
-=== 0.6.1
-* Rebuilt 0.6.0 gem without signing.
-=== 0.6.0
-Its time for some long requested enhancements and lots of bug fixes
-... And a whole new web page.
-==== New Web Page
-The primary documentation for rake has moved from the RubyForge based
-wiki to its own Hieraki based web site.  Constant spam on the wiki
-made it a difficult to keep clean.  The new site will be easier to
-update and organize.
-Check out the new documentation at: http://docs.rubyrake.org
-We will be adding new documentation to the site as time goes on.
-In addition to the new docs page, make sure you check out Martin
-Fowlers article on rake at http://martinfowler.com/articles/rake.html
-==== Changes
-===== New Features
-* Multiple prerequisites on Rake rules now allowed.  However, keep the
-  following in mind:
-  1. All the prerequisites of a rule must be available before a rule
-     is triggered, where "enabled" means (a) an existing file, (b) a
-     defined rule, or (c) another rule which also must be
-     trigger-able.
-  2. Rules are checked in order of definition, so it is important to
-     order your rules properly.  If a file can be created by two
-     different rules, put the more specific rule first (otherwise the
-     more general rule will trigger first and the specific one will
-     never be triggered).
-  3. The <tt>source</tt> method now returns the name of the first
-     prerequisite listed in the rule.  <tt>sources</tt> returns the
-     names of all the rule prerequisites, ordered as they are defined
-     in the rule.  If the task has other prerequisites not defined in
-     the rule (but defined in an explicit task definition), then they
-     will _not_ be included in the sources list.
-* FileLists may now use the egrep command.  This popular enhancement
-  is now a core part of the FileList object.  If you want to get a
-  list of all your to-dos, fixmes and TBD comments, add the following
-  to your Rakefile.
-    desc "Look for TODO and FIXME tags in the code"
-    task :todo do
-      FileList['**/*.rb'].egrep /#.*(FIXME|TODO|TBD)/
-    end
-* The <tt>investigation</tt> method was added to task object to dump
-  out some important values.  This makes it a bit easier to debug Rake
-  tasks.
-  For example, if you are having problems with a particular task, just
-  print it out:
-    task :huh do
-      puts Rake::Task['huh'].investigation
-    end
-* The Rake::TestTask class now supports a "ruby\_opts" option to pass
-  arbitrary ruby options to a test subprocess.
-===== Some Incompatibilities
-* When using the <tt>ruby</tt> command to start a Ruby subprocess, the
-  Ruby interpreter that is currently running rake is used by default.
-  This makes it easier to use rake in an environment with multiple
-  ruby installation.  (Previously, the first ruby command found in the
-  PATH was used).
-  If you wish to chose a different Ruby interpreter, you can
-  explicitly choose the interpreter via the <tt>sh</tt> command.
-* The major rake classes (Task, FileTask, FileCreationTask, RakeApp)
-  have been moved out of the toplevel scope and are now accessible as
-  Rake::Task, Rake::FileTask, Rake::FileCreationTask and
-  Rake::Application.  If your Rakefile
-  directly references any one of these tasks, you may:
-  1. Update your Rakefile to use the new classnames
-  2. Use the --classic-namespace option on the rake command to get the
-     old behavior,
-  3. Add <code>require 'rake/classic_namespace'</code> to the
-     Rakefile to get the old behavior.
-  <tt>rake</tt> will print a rather annoying warning whenever a
-  deprecated class name is referenced without enabling classic
-  namespace.
-===== Bug Fixes
-* Several unit tests and functional tests were fixed to run better
-  under windows.
-* Directory tasks are now a specialized version of a File task.  A
-  directory task will only be triggered if it doesn't exist.  It will
-  not be triggered if it is out of date w.r.t. any of its
-  prerequisites.
-* Fixed a bug in the Rake::GemPackageTask class so that the gem now
-  properly contains the platform name.
-* Fixed a bug where a prerequisite on a <tt>file</tt> task would cause
-  an exception if the prerequisite did not exist.
-==== Thanks
-As usual, it was input from users that drove a alot of these changes.
-The following people either contributed patches, made suggestions or
-made otherwise helpful comments.  Thanks to ...
-* Greg Fast (better ruby_opt test options)
-* Kelly Felkins (requested by better namespace support)
-* Martin Fowler (suggested Task.investigation)
-* Stuart Jansen (send initial patch for multiple prerequisites).
-* Masao Mutch (better support for non-ruby Gem platforms)
-* Philipp Neubeck (patch for file task exception fix)
--- Jim Weirich
-=== 0.5.4
-Time for some minor bug fixes and small enhancements
-==== Changes
-Here are the changes for version 0.5.4 ...
-* Added double quotes to the test runner.  This allows the location of
-  the tests (and runner) to be in a directory path that contains
-  spaces (e.g. "C:/Program Files/ruby/bin").
-* Added .svn to default ignore list.  Now subversion project metadata
-  is automatically ignored by Rake's FileList.
-* Updated FileList#include to support nested arrays and filelists.
-  FileLists are flat lists of file names.  Using a FileList in an
-  include will flatten out the nested file names.
-== Thanks
-As usual, it was input from users that drove a alot of these changes.
-Thanks to ...
-* Tilman Sauerbeck for the nested FileList suggestion.
-* Josh Knowles for pointing out the spaces in directory name problem.
--- Jim Weirich
-=== 0.5.3
-Although it has only been two weeks since the last release, we have
-enough updates to the Rake program to make it time for another
-release.
-==== Changes
-Here are the changes for version 0.5.3 ...
-* FileLists have been extensively changed so that they mimic the
-  behavior of real arrays even more closely.  In particular,
-  operations on FileLists that return a new collection (e.g. collect,
-  reject) will now return a FileList rather than an array.  In
-  addition, several places where FileLists were not properly expanded
-  before use have been fixed.
-* A method (+ext+) to simplify the handling of file extensions was
-  added to String and to Array.
-* The 'testrb' script in test/unit tends to silently swallow syntax
-  errors in test suites.  Because of that, the default test loader is
-  now a rake-provided script.  You can still use 'testrb' by setting
-  the loader flag in the test task to :testrb.  (See the API documents
-  for TestTask for all the loader flag values).
-* FileUtil methods (e.g. cp, mv, install) are now declared to be
-  private.  This will cut down on the interference with user defined
-  methods of the same name.
-* Fixed the verbose flag in the TestTask so that the test code is
-  controlled by the flag.  Also shortened up some failure messages.
-  (Thanks to Tobias Luetke for the suggestion).
-* Rules will now properly detect a task that can generate a source
-  file.  Previously rules would only consider source files that were
-  already present.
-* Added an +import+ command that allows Rake to dynamically import
-  dependendencies into a running Rake session.  The +import+ command
-  can run tasks to update the dependency file before loading them.
-  Dependency files can be in rake or make format, allowing rake to
-  work with tools designed to generate dependencies for make.
-==== Thanks
-As usual, it was input from users that drove a alot of these changes.
-Thanks to ...
-* Brian Gernhardt for the rules fix (especially for the patience to
-  explain the problem to me until I got what he was talking about).
-* Stefan Lang for pointing out problems in the dark corners of the
-  FileList implementation.
-* Alexey Verkhovsky pointing out the silently swallows syntax errors
-  in tests.
-* Tobias Luetke for beautifying the test task output.
-* Sam Roberts for some of the ideas behind dependency loading.
--- Jim Weirich
-=== 0.5.0
-It has been a long time in coming, but we finally have a new version
-of Rake available.
-==== Changes
-* Fixed documentation that was lacking the Rake module name (Tilman
-  Sauerbeck).
-* Added tar.gz and tar.bz2 support to package task (Tilman Sauerbeck).
-* Recursive rules are now supported (Tilman Sauerbeck).
-* Added warning option for the Test Task (requested by Eric Hodel).
-* The jamis rdoc template is only used if it exists.
-* Added fix for Ruby 1.8.2 test/unit and rails problem.
-* Added contributed rake man file (Jani Monoses).
-* Added Brian Candler's fix for problems in --trace and --dry-run
-  mode.
-==== Thanks
-Lots of people provided input to this release.  Thanks to Tilman
-Sauerbeck for numerous patches, documentation fixes and suggestions.
-And for also pushing me to get this release out.  Also, thanks to
-Brian Candler for the finding and fixing --trace/dry-run fix.  That
-was an obscure bug.  Also to Eric Hodel for some good suggestions.
--- Jim Weirich
-=== 0.4.15
-==== Changes
-Version 0.4.15 is a bug fix update for the Ruby 1.8.2 compatibility
-changes.  This release includes:
-* Fixed a bug that prevented the TESTOPTS flag from working with the
-  revised for 1.8.2 test task.
-* Updated the docs on --trace to indicate that it also enables a full
-  backtrace on errors.
-* Several fixes for new warnings generated.
-==== Mini-Roadmap
-I will continue to issue Rake updates in the 0.4.xx series as new
-Ruby-1.8.2 issues become manifest.  Once the codebase stabilizes, I
-will release a 0.5.0 version incorporating all the changes.  If you
-are not using Ruby-1.8.2 and wish to avoid version churn, I recommend
-staying with a release prior to Rake-0.4.14.
-=== 0.4.14
-Version 0.4.14 is a compatibility fix to allow Rake's test task to
-work under Ruby 1.8.2.  A change in the Test::Unit autorun feature
-prevented Rake from running any tests.  This release fixes the
-problem.
-Rake 0.4.14 is the recommended release for anyone using Ruby 1.8.2.
-=== 0.4.13
-* Fixed the dry-run flag so it is operating again.
-* Multiple arguments to sh and ruby commands will not be interpreted
-  by the shell (patch provided by Jonathan Paisley).
-=== 0.4.12
-* Added --silent (-s) to suppress the (in directory) rake message.
-=== 0.4.11
-* Changed the "don't know how to rake" message (finally)
-* Changes references to a literal "Rakefile" to reference the global
-  variable $rakefile (which contains the actual name of the rakefile).
-=== 0.4.10
-* Added block support to the "sh" command, allowing users to take
-  special actions on the result of the system call.  E.g.
-    sh "shell_command" do |ok, res|
-      puts "Program returned #{res.exitstatus}" if ! ok
-    end
-=== 0.4.9
-* Switched to Jamis Buck's RDoc template.
-* Removed autorequire from Rake's gem spec.  This prevents the Rake
-  libraries from loading while using rails.
-=== 0.4.8
-* Added support for .rb versions of Rakefile.
-* Removed \\\n's from test task.
-* Fixed Ruby 1.9 compatibility issue with FileList.
-=== 0.4.7
-* Fixed problem in FileList that caused Ruby 1.9 to go into infinite
-  recursion.  Since to_a was removed from Object, it does not need to
-  added back into the list of methods to rewrite in FileList.  (Thanks
-  to Kent Sibilev for pointing this out).
-=== 0.4.6
-* Removed test version of ln in FileUtils that prevented safe_ln from
-  using ln.
-=== 0.4.5
-* Upgraded comments in TestTask.
-* FileList to_s and inspect now automatically resolve pending changes.
-* FileList#exclude properly returns the FileList.
-=== 0.4.4
-* Fixed initialization problem with @comment.
-* Now using multi -r technique in TestTask.  Switch Rakefile back to
-  using the built-in test task macros because the rake runtime is no
-  longer needed.
-* Added 'TEST=filename' and 'TESTOPTS=options' to the Test Task
-  macros.
-* Allow a +test_files+ attribute in test tasks.  This allows more
-  flexibility in specifying test files.
-=== 0.4.3
-* Fixed Comment leakage.
-=== 0.4.2
-* Added safe_ln that falls back to a copy if a file link is not supported.
-* Package builder now uses safe\_ln.
-=== 0.4.1
-* Task comments are now additive, combined with "/".
-* Works with (soon to be released) rubygems 0.6.2 (or 0.7.0)
-=== 0.4.0
-* FileList now uses deferred loading.  The file system is not searched
-  until the first call that needs the file names.
-* VAR=VALUE options are now accepted on the command line and are
-  treated like environment variables.  The values may be tested in a
-  Rakefile by referencing ENV['VAR'].
-* File.mtime is now used (instead of File.new().mtime).
-=== 0.3.2.x
-* Removed some hidden dependencies on rubygems.  Tests now will test
-  gems only if they are installed.
-* Removed Sys from some example files.  I believe that is that last
-  reference to Sys outside of the contrib area.
-* Updated all copyright notices to include 2004.
-=== 0.3.2
-* GEM Installation now works with the application stub.
-=== 0.3.1
-* FileLists now automatically ignore CVS, .bak, !
-* GEM Installation now works.
-=== 0.3.0
-Promoted 0.2.10.
-=== 0.2.10
-General
-* Added title to Rake's rdocs
-* Contrib packages are no longer included in the documentation.
-RDoc Issues
-* Removed default for the '--main' option
-* Fixed rendering of the rdoc options
-* Fixed clean/clobber confusion with rerdoc
-* 'title' attribute added
-Package Task Library Issues
-* Version (or explicit :noversion) is required.
-* +package_file+ attribute is now writable
-FileList Issues
-* Dropped bang version of exclude.  Now using ant-like include/exclude semantics.
-* Enabled the "yield self" idiom in FileList#initialize.
-=== 0.2.9
-This version contains numerous changes as the RubyConf.new(2003)
-presentation was being prepared.  The changes include:
-* The monolithic rubyapp task library is in the process of being
-  dropped in favor of lighter weight task libraries.
-=== 0.2.7
-* Added "desc" for task descriptions.
-* -T will now display tasks with descriptions.
-* -P will display tasks and prerequisites.
-* Dropped the Sys module in favor of the 1.8.x FileUtils module.  Sys
-  is still supported in the contrib area.
-=== 0.2.6
-* Moved to RubyForge
-=== 0.2.5
-* Switched to standard ruby app builder.
-* Added no_match option to file matcher.
-=== 0.2.4
-* Fixed indir, which neglected to actually change directories.
-=== 0.2.3
-* Added rake module for a help target
-* Added 'for\_files' to Sys
-* Added a $rakefile constant
-* Added test for selecting proper rule with multiple targets.