logstash-output-scalyr 0.1.5 → 0.1.6

data/vendor/bundle/jruby/2.5.0/gems/concurrent-ruby-1.1.6/lib/concurrent-ruby/concurrent/errors.rb

@@ -1,69 +0,0 @@
-module Concurrent
-
-  Error = Class.new(StandardError)
-
-  # Raised when errors occur during configuration.
-  ConfigurationError = Class.new(Error)
-
-  # Raised when an asynchronous operation is cancelled before execution.
-  CancelledOperationError = Class.new(Error)
-
-  # Raised when a lifecycle method (such as `stop`) is called in an improper
-  # sequence or when the object is in an inappropriate state.
-  LifecycleError = Class.new(Error)
-
-  # Raised when an attempt is made to violate an immutability guarantee.
-  ImmutabilityError = Class.new(Error)
-
-  # Raised when an operation is attempted which is not legal given the
-  # receiver's current state
-  IllegalOperationError = Class.new(Error)
-
-  # Raised when an object's methods are called when it has not been
-  # properly initialized.
-  InitializationError = Class.new(Error)
-
-  # Raised when an object with a start/stop lifecycle has been started an
-  # excessive number of times. Often used in conjunction with a restart
-  # policy or strategy.
-  MaxRestartFrequencyError = Class.new(Error)
-
-  # Raised when an attempt is made to modify an immutable object
-  # (such as an `IVar`) after its final state has been set.
-  class MultipleAssignmentError < Error
-    attr_reader :inspection_data
-
-    def initialize(message = nil, inspection_data = nil)
-      @inspection_data = inspection_data
-      super message
-    end
-
-    def inspect
-      format '%s %s>', super[0..-2], @inspection_data.inspect
-    end
-  end
-
-  # Raised by an `Executor` when it is unable to process a given task,
-  # possibly because of a reject policy or other internal error.
-  RejectedExecutionError = Class.new(Error)
-
-  # Raised when any finite resource, such as a lock counter, exceeds its
-  # maximum limit/threshold.
-  ResourceLimitError = Class.new(Error)
-
-  # Raised when an operation times out.
-  TimeoutError = Class.new(Error)
-
-  # Aggregates multiple exceptions.
-  class MultipleErrors < Error
-    attr_reader :errors
-
-    def initialize(errors, message = "#{errors.size} errors")
-      @errors = errors
-      super [*message,
-             *errors.map { |e| [format('%s (%s)', e.message, e.class), *e.backtrace] }.flatten(1)
-            ].join("\n")
-    end
-  end
-
-end

data/vendor/bundle/jruby/2.5.0/gems/concurrent-ruby-1.1.6/lib/concurrent-ruby/concurrent/exchanger.rb

@@ -1,352 +0,0 @@
-require 'concurrent/constants'
-require 'concurrent/errors'
-require 'concurrent/maybe'
-require 'concurrent/atomic/atomic_reference'
-require 'concurrent/atomic/count_down_latch'
-require 'concurrent/utility/engine'
-require 'concurrent/utility/monotonic_time'
-
-module Concurrent
-
-  # @!macro exchanger
-  #
-  #   A synchronization point at which threads can pair and swap elements within
-  #   pairs. Each thread presents some object on entry to the exchange method,
-  #   matches with a partner thread, and receives its partner's object on return.
-  #
-  #   @!macro thread_safe_variable_comparison
-  #
-  #   This implementation is very simple, using only a single slot for each
-  #   exchanger (unlike more advanced implementations which use an "arena").
-  #   This approach will work perfectly fine when there are only a few threads
-  #   accessing a single `Exchanger`. Beyond a handful of threads the performance
-  #   will degrade rapidly due to contention on the single slot, but the algorithm
-  #   will remain correct.
-  #
-  #   @see http://docs.oracle.com/javase/7/docs/api/java/util/concurrent/Exchanger.html java.util.concurrent.Exchanger
-  #   @example
-  #
-  #     exchanger = Concurrent::Exchanger.new
-  #
-  #     threads = [
-  #       Thread.new { puts "first: " << exchanger.exchange('foo', 1) }, #=> "first: bar"
-  #       Thread.new { puts "second: " << exchanger.exchange('bar', 1) } #=> "second: foo"
-  #     ]
-  #     threads.each {|t| t.join(2) }
-
-  # @!visibility private
-  class AbstractExchanger < Synchronization::Object
-
-    # @!visibility private
-    CANCEL = ::Object.new
-    private_constant :CANCEL
-
-    def initialize
-      super
-    end
-
-    # @!macro exchanger_method_do_exchange
-    #
-    #   Waits for another thread to arrive at this exchange point (unless the
-    #   current thread is interrupted), and then transfers the given object to
-    #   it, receiving its object in return. The timeout value indicates the
-    #   approximate number of seconds the method should block while waiting
-    #   for the exchange. When the timeout value is `nil` the method will
-    #   block indefinitely.
-    #
-    #   @param [Object] value the value to exchange with another thread
-    #   @param [Numeric, nil] timeout in seconds, `nil` blocks indefinitely
-    #
-    # @!macro exchanger_method_exchange
-    #
-    #   In some edge cases when a `timeout` is given a return value of `nil` may be
-    #   ambiguous. Specifically, if `nil` is a valid value in the exchange it will
-    #   be impossible to tell whether `nil` is the actual return value or if it
-    #   signifies timeout. When `nil` is a valid value in the exchange consider
-    #   using {#exchange!} or {#try_exchange} instead.
-    #
-    #   @return [Object] the value exchanged by the other thread or `nil` on timeout
-    def exchange(value, timeout = nil)
-      (value = do_exchange(value, timeout)) == CANCEL ? nil : value
-    end
-
-    # @!macro exchanger_method_do_exchange
-    # @!macro exchanger_method_exchange_bang
-    #
-    #   On timeout a {Concurrent::TimeoutError} exception will be raised.
-    #
-    #   @return [Object] the value exchanged by the other thread
-    #   @raise [Concurrent::TimeoutError] on timeout
-    def exchange!(value, timeout = nil)
-      if (value = do_exchange(value, timeout)) == CANCEL
-        raise Concurrent::TimeoutError
-      else
-        value
-      end
-    end
-
-    # @!macro exchanger_method_do_exchange
-    # @!macro exchanger_method_try_exchange
-    #
-    #   The return value will be a {Concurrent::Maybe} set to `Just` on success or
-    #   `Nothing` on timeout.
-    #
-    #   @return [Concurrent::Maybe] on success a `Just` maybe will be returned with
-    #     the item exchanged by the other thread as `#value`; on timeout a
-    #     `Nothing` maybe will be returned with {Concurrent::TimeoutError} as `#reason`
-    #
-    #   @example
-    #
-    #     exchanger = Concurrent::Exchanger.new
-    #
-    #     result = exchanger.exchange(:foo, 0.5)
-    #
-    #     if result.just?
-    #       puts result.value #=> :bar
-    #     else
-    #       puts 'timeout'
-    #     end
-    def try_exchange(value, timeout = nil)
-      if (value = do_exchange(value, timeout)) == CANCEL
-        Concurrent::Maybe.nothing(Concurrent::TimeoutError)
-      else
-        Concurrent::Maybe.just(value)
-      end
-    end
-
-    private
-
-    # @!macro exchanger_method_do_exchange
-    #
-    # @return [Object, CANCEL] the value exchanged by the other thread; {CANCEL} on timeout
-    def do_exchange(value, timeout)
-      raise NotImplementedError
-    end
-  end
-
-  # @!macro internal_implementation_note
-  # @!visibility private
-  class RubyExchanger < AbstractExchanger
-    # A simplified version of java.util.concurrent.Exchanger written by
-    # Doug Lea, Bill Scherer, and Michael Scott with assistance from members
-    # of JCP JSR-166 Expert Group and released to the public domain. It does
-    # not include the arena or the multi-processor spin loops.
-    # http://grepcode.com/file/repository.grepcode.com/java/root/jdk/openjdk/6-b14/java/util/concurrent/Exchanger.java
-
-    safe_initialization!
-
-    class Node < Concurrent::Synchronization::Object
-      attr_atomic :value
-      safe_initialization!
-
-      def initialize(item)
-        super()
-        @Item      = item
-        @Latch     = Concurrent::CountDownLatch.new
-        self.value = nil
-      end
-
-      def latch
-        @Latch
-      end
-
-      def item
-        @Item
-      end
-    end
-    private_constant :Node
-
-    def initialize
-      super
-    end
-
-    private
-
-    attr_atomic(:slot)
-
-    # @!macro exchanger_method_do_exchange
-    #
-    # @return [Object, CANCEL] the value exchanged by the other thread; {CANCEL} on timeout
-    def do_exchange(value, timeout)
-
-      # ALGORITHM
-      #
-      # From the original Java version:
-      #
-      # > The basic idea is to maintain a "slot", which is a reference to
-      # > a Node containing both an Item to offer and a "hole" waiting to
-      # > get filled in.  If an incoming "occupying" thread sees that the
-      # > slot is null, it CAS'es (compareAndSets) a Node there and waits
-      # > for another to invoke exchange.  That second "fulfilling" thread
-      # > sees that the slot is non-null, and so CASes it back to null,
-      # > also exchanging items by CASing the hole, plus waking up the
-      # > occupying thread if it is blocked.  In each case CAS'es may
-      # > fail because a slot at first appears non-null but is null upon
-      # > CAS, or vice-versa.  So threads may need to retry these
-      # > actions.
-      #
-      # This version:
-      #
-      # An exchange occurs between an "occupier" thread and a "fulfiller" thread.
-      # The "slot" is used to setup this interaction. The first thread in the
-      # exchange puts itself into the slot (occupies) and waits for a fulfiller.
-      # The second thread removes the occupier from the slot and attempts to
-      # perform the exchange. Removing the occupier also frees the slot for
-      # another occupier/fulfiller pair.
-      #
-      # Because the occupier and the fulfiller are operating independently and
-      # because there may be contention with other threads, any failed operation
-      # indicates contention. Both the occupier and the fulfiller operate within
-      # spin loops. Any failed actions along the happy path will cause the thread
-      # to repeat the loop and try again.
-      #
-      # When a timeout value is given the thread must be cognizant of time spent
-      # in the spin loop. The remaining time is checked every loop. When the time
-      # runs out the thread will exit.
-      #
-      # A "node" is the data structure used to perform the exchange. Only the
-      # occupier's node is necessary. It's the node used for the exchange.
-      # Each node has an "item," a "hole" (self), and a "latch." The item is the
-      # node's initial value. It never changes. It's what the fulfiller returns on
-      # success. The occupier's hole is where the fulfiller put its item. It's the
-      # item that the occupier returns on success. The latch is used for synchronization.
-      # Because a thread may act as either an occupier or fulfiller (or possibly
-      # both in periods of high contention) every thread creates a node when
-      # the exchange method is first called.
-      #
-      # The following steps occur within the spin loop. If any actions fail
-      # the thread will loop and try again, so long as there is time remaining.
-      # If time runs out the thread will return CANCEL.
-      #
-      # Check the slot for an occupier:
-      #
-      #   * If the slot is empty try to occupy
-      #   * If the slot is full try to fulfill
-      #
-      # Attempt to occupy:
-      #
-      #   * Attempt to CAS myself into the slot
-      #   * Go to sleep and wait to be woken by a fulfiller
-      #   * If the sleep is successful then the fulfiller completed its happy path
-      #     - Return the value from my hole (the value given by the fulfiller)
-      #   * When the sleep fails (time ran out) attempt to cancel the operation
-      #     - Attempt to CAS myself out of the hole
-      #     - If successful there is no contention
-      #       - Return CANCEL
-      #     - On failure, I am competing with a fulfiller
-      #       - Attempt to CAS my hole to CANCEL
-      #       - On success
-      #         - Let the fulfiller deal with my cancel
-      #         - Return CANCEL
-      #       - On failure the fulfiller has completed its happy path
-      #         - Return th value from my hole (the fulfiller's value)
-      #
-      # Attempt to fulfill:
-      #
-      # * Attempt to CAS the occupier out of the slot
-      #   - On failure loop again
-      # * Attempt to CAS my item into the occupier's hole
-      #   - On failure the occupier is trying to cancel
-      #     - Loop again
-      #   - On success we are on the happy path
-      #     - Wake the sleeping occupier
-      #     - Return the occupier's item
-
-      value  = NULL if value.nil? # The sentinel allows nil to be a valid value
-      me     = Node.new(value) # create my node in case I need to occupy
-      end_at = Concurrent.monotonic_time + timeout.to_f # The time to give up
-
-      result = loop do
-        other = slot
-        if other && compare_and_set_slot(other, nil)
-          # try to fulfill
-          if other.compare_and_set_value(nil, value)
-            # happy path
-            other.latch.count_down
-            break other.item
-          end
-        elsif other.nil? && compare_and_set_slot(nil, me)
-          # try to occupy
-          timeout = end_at - Concurrent.monotonic_time if timeout
-          if me.latch.wait(timeout)
-            # happy path
-            break me.value
-          else
-            # attempt to remove myself from the slot
-            if compare_and_set_slot(me, nil)
-              break CANCEL
-            elsif !me.compare_and_set_value(nil, CANCEL)
-              # I've failed to block the fulfiller
-              break me.value
-            end
-          end
-        end
-        break CANCEL if timeout && Concurrent.monotonic_time >= end_at
-      end
-
-      result == NULL ? nil : result
-    end
-  end
-
-  if Concurrent.on_jruby?
-
-    # @!macro internal_implementation_note
-    # @!visibility private
-    class JavaExchanger < AbstractExchanger
-
-      def initialize
-        @exchanger = java.util.concurrent.Exchanger.new
-      end
-
-      private
-
-      # @!macro exchanger_method_do_exchange
-      #
-      # @return [Object, CANCEL] the value exchanged by the other thread; {CANCEL} on timeout
-      def do_exchange(value, timeout)
-        result = nil
-        if timeout.nil?
-          Synchronization::JRuby.sleep_interruptibly do
-            result = @exchanger.exchange(value)
-          end
-        else
-          Synchronization::JRuby.sleep_interruptibly do
-            result = @exchanger.exchange(value, 1000 * timeout, java.util.concurrent.TimeUnit::MILLISECONDS)
-          end
-        end
-        result
-      rescue java.util.concurrent.TimeoutException
-        CANCEL
-      end
-    end
-  end
-
-  # @!visibility private
-  # @!macro internal_implementation_note
-  ExchangerImplementation = case
-                            when Concurrent.on_jruby?
-                              JavaExchanger
-                            else
-                              RubyExchanger
-                            end
-  private_constant :ExchangerImplementation
-
-  # @!macro exchanger
-  class Exchanger < ExchangerImplementation
-
-    # @!method initialize
-    #   Creates exchanger instance
-
-    # @!method exchange(value, timeout = nil)
-    #   @!macro exchanger_method_do_exchange
-    #   @!macro exchanger_method_exchange
-
-    # @!method exchange!(value, timeout = nil)
-    #   @!macro exchanger_method_do_exchange
-    #   @!macro exchanger_method_exchange_bang
-
-    # @!method try_exchange(value, timeout = nil)
-    #   @!macro exchanger_method_do_exchange
-    #   @!macro exchanger_method_try_exchange
-  end
-end

data/vendor/bundle/jruby/2.5.0/gems/concurrent-ruby-1.1.6/lib/concurrent-ruby/concurrent/executor/abstract_executor_service.rb

@@ -1,128 +0,0 @@
-require 'concurrent/errors'
-require 'concurrent/concern/deprecation'
-require 'concurrent/executor/executor_service'
-require 'concurrent/synchronization'
-
-module Concurrent
-
-  # @!macro abstract_executor_service_public_api
-  # @!visibility private
-  class AbstractExecutorService < Synchronization::LockableObject
-    include ExecutorService
-    include Concern::Deprecation
-
-    # The set of possible fallback policies that may be set at thread pool creation.
-    FALLBACK_POLICIES = [:abort, :discard, :caller_runs].freeze
-
-    # @!macro executor_service_attr_reader_fallback_policy
-    attr_reader :fallback_policy
-
-    attr_reader :name
-
-    # Create a new thread pool.
-    def initialize(opts = {}, &block)
-      super(&nil)
-      synchronize do
-        @auto_terminate = opts.fetch(:auto_terminate, true)
-        @name = opts.fetch(:name) if opts.key?(:name)
-        ns_initialize(opts, &block)
-      end
-    end
-
-    def to_s
-      name ? "#{super[0..-2]} name: #{name}>" : super
-    end
-
-    # @!macro executor_service_method_shutdown
-    def shutdown
-      raise NotImplementedError
-    end
-
-    # @!macro executor_service_method_kill
-    def kill
-      raise NotImplementedError
-    end
-
-    # @!macro executor_service_method_wait_for_termination
-    def wait_for_termination(timeout = nil)
-      raise NotImplementedError
-    end
-
-    # @!macro executor_service_method_running_question
-    def running?
-      synchronize { ns_running? }
-    end
-
-    # @!macro executor_service_method_shuttingdown_question
-    def shuttingdown?
-      synchronize { ns_shuttingdown? }
-    end
-
-    # @!macro executor_service_method_shutdown_question
-    def shutdown?
-      synchronize { ns_shutdown? }
-    end
-
-    # @!macro executor_service_method_auto_terminate_question
-    def auto_terminate?
-      synchronize { @auto_terminate }
-    end
-
-    # @!macro executor_service_method_auto_terminate_setter
-    def auto_terminate=(value)
-      deprecated "Method #auto_terminate= has no effect. Set :auto_terminate option when executor is initialized."
-    end
-
-    private
-
-    # Handler which executes the `fallback_policy` once the queue size
-    # reaches `max_queue`.
-    #
-    # @param [Array] args the arguments to the task which is being handled.
-    #
-    # @!visibility private
-    def handle_fallback(*args)
-      case fallback_policy
-      when :abort
-        raise RejectedExecutionError
-      when :discard
-        false
-      when :caller_runs
-        begin
-          yield(*args)
-        rescue => ex
-          # let it fail
-          log DEBUG, ex
-        end
-        true
-      else
-        fail "Unknown fallback policy #{fallback_policy}"
-      end
-    end
-
-    def ns_execute(*args, &task)
-      raise NotImplementedError
-    end
-
-    # @!macro executor_service_method_ns_shutdown_execution
-    #
-    #   Callback method called when an orderly shutdown has completed.
-    #   The default behavior is to signal all waiting threads.
-    def ns_shutdown_execution
-      # do nothing
-    end
-
-    # @!macro executor_service_method_ns_kill_execution
-    #
-    #   Callback method called when the executor has been killed.
-    #   The default behavior is to do nothing.
-    def ns_kill_execution
-      # do nothing
-    end
-
-    def ns_auto_terminate?
-      @auto_terminate
-    end
-
-  end
-end