lithic 0.21.0 → 0.22.0

data/rbi/lithic/models/parsed_webhook_event.rbi

@@ -340,7 +340,8 @@ module Lithic
               end
 
             # Individual's current address - PO boxes, UPS drops, and FedEx drops are not
-            # acceptable; APO/FPO are acceptable. Only USA addresses are currently supported.
+            # acceptable; APO/FPO are acceptable. Only USA addresses are supported for the KYB
+            # and KYC workflows.
             sig do
               returns(
                 T.nilable(
@@ -407,7 +408,8 @@ module Lithic
             end
             def self.new(
               # Individual's current address - PO boxes, UPS drops, and FedEx drops are not
-              # acceptable; APO/FPO are acceptable. Only USA addresses are currently supported.
+              # acceptable; APO/FPO are acceptable. Only USA addresses are supported for the KYB
+              # and KYC workflows.
               address: nil,
               # Individual's date of birth, as an RFC 3339 date.
               dob: nil,
@@ -457,21 +459,12 @@ module Lithic
               sig { returns(String) }
               attr_accessor :city
 
-              # Valid country code. Only USA is currently supported, entered in uppercase ISO
-              # 3166-1 alpha-3 three-character format.
+              # Valid country code, entered in uppercase ISO 3166-1 alpha-3 three-character
+              # format. Supported countries depend on the onboarding workflow used for the
+              # account holder.
               sig { returns(String) }
               attr_accessor :country
 
-              # Valid postal code. Only USA ZIP codes are currently supported, entered as a
-              # five-digit ZIP or nine-digit ZIP+4.
-              sig { returns(String) }
-              attr_accessor :postal_code
-
-              # Valid state code. Only USA state codes are currently supported, entered in
-              # uppercase ISO 3166-2 two-character format.
-              sig { returns(String) }
-              attr_accessor :state
-
               # Unit or apartment number (if applicable).
               sig { returns(T.nilable(String)) }
               attr_reader :address2
@@ -479,16 +472,42 @@ module Lithic
               sig { params(address2: String).void }
               attr_writer :address2
 
+              # Valid postal code. For USA addresses, enter either a five-digit postal code or a
+              # nine-digit postal code (ZIP+4) using the format 12345-1234. Required for all
+              # countries except the following, which do not use postal codes: ABW, AGO, ARE,
+              # ATG, BDI, BEN, BFA, BHS, BLZ, BOL, BWA, CIV, CMR, COD, COG, COK, COM, DJI, DMA,
+              # ERI, FJI, GAB, GMB, GNQ, GRD, GUY, HKG, KIR, MAC, MLI, MRT, NIU, NRU, QAT, RWA,
+              # SLB, SLE, SSD, SUR, SXM, SYC, TGO, TKL, TLS, TON, TUV, UGA, VUT, YEM, ZWE
+              sig { returns(T.nilable(String)) }
+              attr_accessor :postal_code
+
+              # Valid state, province, or subdivision code, entered as the uppercase ISO 3166-2
+              # code for the country without the country prefix. For example, `CA` for
+              # California. Optional unless the address is in one of the following countries,
+              # where it is required:
+              #
+              # - `USA`
+              # - `CAN`
+              # - `AUS`
+              # - `CHN`
+              # - `KOR`
+              # - `MEX`
+              # - `MYS`
+              # - `NZL`
+              sig { returns(T.nilable(String)) }
+              attr_accessor :state
+
               # Individual's current address - PO boxes, UPS drops, and FedEx drops are not
-              # acceptable; APO/FPO are acceptable. Only USA addresses are currently supported.
+              # acceptable; APO/FPO are acceptable. Only USA addresses are supported for the KYB
+              # and KYC workflows.
               sig do
                 params(
                   address1: String,
                   city: String,
                   country: String,
-                  postal_code: String,
-                  state: String,
-                  address2: String
+                  address2: String,
+                  postal_code: T.nilable(String),
+                  state: T.nilable(String)
                 ).returns(T.attached_class)
               end
               def self.new(
@@ -496,17 +515,33 @@ module Lithic
                 address1:,
                 # Name of city.
                 city:,
-                # Valid country code. Only USA is currently supported, entered in uppercase ISO
-                # 3166-1 alpha-3 three-character format.
+                # Valid country code, entered in uppercase ISO 3166-1 alpha-3 three-character
+                # format. Supported countries depend on the onboarding workflow used for the
+                # account holder.
                 country:,
-                # Valid postal code. Only USA ZIP codes are currently supported, entered as a
-                # five-digit ZIP or nine-digit ZIP+4.
-                postal_code:,
-                # Valid state code. Only USA state codes are currently supported, entered in
-                # uppercase ISO 3166-2 two-character format.
-                state:,
                 # Unit or apartment number (if applicable).
-                address2: nil
+                address2: nil,
+                # Valid postal code. For USA addresses, enter either a five-digit postal code or a
+                # nine-digit postal code (ZIP+4) using the format 12345-1234. Required for all
+                # countries except the following, which do not use postal codes: ABW, AGO, ARE,
+                # ATG, BDI, BEN, BFA, BHS, BLZ, BOL, BWA, CIV, CMR, COD, COG, COK, COM, DJI, DMA,
+                # ERI, FJI, GAB, GMB, GNQ, GRD, GUY, HKG, KIR, MAC, MLI, MRT, NIU, NRU, QAT, RWA,
+                # SLB, SLE, SSD, SUR, SXM, SYC, TGO, TKL, TLS, TON, TUV, UGA, VUT, YEM, ZWE
+                postal_code: nil,
+                # Valid state, province, or subdivision code, entered as the uppercase ISO 3166-2
+                # code for the country without the country prefix. For example, `CA` for
+                # California. Optional unless the address is in one of the following countries,
+                # where it is required:
+                #
+                # - `USA`
+                # - `CAN`
+                # - `AUS`
+                # - `CHN`
+                # - `KOR`
+                # - `MEX`
+                # - `MYS`
+                # - `NZL`
+                state: nil
               )
               end
 
@@ -516,9 +551,9 @@ module Lithic
                     address1: String,
                     city: String,
                     country: String,
-                    postal_code: String,
-                    state: String,
-                    address2: String
+                    address2: String,
+                    postal_code: T.nilable(String),
+                    state: T.nilable(String)
                   }
                 )
               end
@@ -537,7 +572,8 @@ module Lithic
               end
 
             # Individual's current address - PO boxes, UPS drops, and FedEx drops are not
-            # acceptable; APO/FPO are acceptable. Only USA addresses are currently supported.
+            # acceptable; APO/FPO are acceptable. Only USA addresses are supported for the KYB
+            # and KYC workflows.
             sig do
               returns(
                 T.nilable(
@@ -612,7 +648,8 @@ module Lithic
             end
             def self.new(
               # Individual's current address - PO boxes, UPS drops, and FedEx drops are not
-              # acceptable; APO/FPO are acceptable. Only USA addresses are currently supported.
+              # acceptable; APO/FPO are acceptable. Only USA addresses are supported for the KYB
+              # and KYC workflows.
               address: nil,
               # Individual's date of birth, as an RFC 3339 date.
               dob: nil,
@@ -662,21 +699,12 @@ module Lithic
               sig { returns(String) }
               attr_accessor :city
 
-              # Valid country code. Only USA is currently supported, entered in uppercase ISO
-              # 3166-1 alpha-3 three-character format.
+              # Valid country code, entered in uppercase ISO 3166-1 alpha-3 three-character
+              # format. Supported countries depend on the onboarding workflow used for the
+              # account holder.
               sig { returns(String) }
               attr_accessor :country
 
-              # Valid postal code. Only USA ZIP codes are currently supported, entered as a
-              # five-digit ZIP or nine-digit ZIP+4.
-              sig { returns(String) }
-              attr_accessor :postal_code
-
-              # Valid state code. Only USA state codes are currently supported, entered in
-              # uppercase ISO 3166-2 two-character format.
-              sig { returns(String) }
-              attr_accessor :state
-
               # Unit or apartment number (if applicable).
               sig { returns(T.nilable(String)) }
               attr_reader :address2
@@ -684,16 +712,42 @@ module Lithic
               sig { params(address2: String).void }
               attr_writer :address2
 
+              # Valid postal code. For USA addresses, enter either a five-digit postal code or a
+              # nine-digit postal code (ZIP+4) using the format 12345-1234. Required for all
+              # countries except the following, which do not use postal codes: ABW, AGO, ARE,
+              # ATG, BDI, BEN, BFA, BHS, BLZ, BOL, BWA, CIV, CMR, COD, COG, COK, COM, DJI, DMA,
+              # ERI, FJI, GAB, GMB, GNQ, GRD, GUY, HKG, KIR, MAC, MLI, MRT, NIU, NRU, QAT, RWA,
+              # SLB, SLE, SSD, SUR, SXM, SYC, TGO, TKL, TLS, TON, TUV, UGA, VUT, YEM, ZWE
+              sig { returns(T.nilable(String)) }
+              attr_accessor :postal_code
+
+              # Valid state, province, or subdivision code, entered as the uppercase ISO 3166-2
+              # code for the country without the country prefix. For example, `CA` for
+              # California. Optional unless the address is in one of the following countries,
+              # where it is required:
+              #
+              # - `USA`
+              # - `CAN`
+              # - `AUS`
+              # - `CHN`
+              # - `KOR`
+              # - `MEX`
+              # - `MYS`
+              # - `NZL`
+              sig { returns(T.nilable(String)) }
+              attr_accessor :state
+
               # Individual's current address - PO boxes, UPS drops, and FedEx drops are not
-              # acceptable; APO/FPO are acceptable. Only USA addresses are currently supported.
+              # acceptable; APO/FPO are acceptable. Only USA addresses are supported for the KYB
+              # and KYC workflows.
               sig do
                 params(
                   address1: String,
                   city: String,
                   country: String,
-                  postal_code: String,
-                  state: String,
-                  address2: String
+                  address2: String,
+                  postal_code: T.nilable(String),
+                  state: T.nilable(String)
                 ).returns(T.attached_class)
               end
               def self.new(
@@ -701,17 +755,33 @@ module Lithic
                 address1:,
                 # Name of city.
                 city:,
-                # Valid country code. Only USA is currently supported, entered in uppercase ISO
-                # 3166-1 alpha-3 three-character format.
+                # Valid country code, entered in uppercase ISO 3166-1 alpha-3 three-character
+                # format. Supported countries depend on the onboarding workflow used for the
+                # account holder.
                 country:,
-                # Valid postal code. Only USA ZIP codes are currently supported, entered as a
-                # five-digit ZIP or nine-digit ZIP+4.
-                postal_code:,
-                # Valid state code. Only USA state codes are currently supported, entered in
-                # uppercase ISO 3166-2 two-character format.
-                state:,
                 # Unit or apartment number (if applicable).
-                address2: nil
+                address2: nil,
+                # Valid postal code. For USA addresses, enter either a five-digit postal code or a
+                # nine-digit postal code (ZIP+4) using the format 12345-1234. Required for all
+                # countries except the following, which do not use postal codes: ABW, AGO, ARE,
+                # ATG, BDI, BEN, BFA, BHS, BLZ, BOL, BWA, CIV, CMR, COD, COG, COK, COM, DJI, DMA,
+                # ERI, FJI, GAB, GMB, GNQ, GRD, GUY, HKG, KIR, MAC, MLI, MRT, NIU, NRU, QAT, RWA,
+                # SLB, SLE, SSD, SUR, SXM, SYC, TGO, TKL, TLS, TON, TUV, UGA, VUT, YEM, ZWE
+                postal_code: nil,
+                # Valid state, province, or subdivision code, entered as the uppercase ISO 3166-2
+                # code for the country without the country prefix. For example, `CA` for
+                # California. Optional unless the address is in one of the following countries,
+                # where it is required:
+                #
+                # - `USA`
+                # - `CAN`
+                # - `AUS`
+                # - `CHN`
+                # - `KOR`
+                # - `MEX`
+                # - `MYS`
+                # - `NZL`
+                state: nil
               )
               end
 
@@ -721,9 +791,9 @@ module Lithic
                     address1: String,
                     city: String,
                     country: String,
-                    postal_code: String,
-                    state: String,
-                    address2: String
+                    address2: String,
+                    postal_code: T.nilable(String),
+                    state: T.nilable(String)
                   }
                 )
               end
@@ -914,7 +984,8 @@ module Lithic
               end
 
             # Individual's current address - PO boxes, UPS drops, and FedEx drops are not
-            # acceptable; APO/FPO are acceptable. Only USA addresses are currently supported.
+            # acceptable; APO/FPO are acceptable. Only USA addresses are supported for the KYB
+            # and KYC workflows.
             sig do
               returns(
                 T.nilable(
@@ -983,7 +1054,8 @@ module Lithic
             end
             def self.new(
               # Individual's current address - PO boxes, UPS drops, and FedEx drops are not
-              # acceptable; APO/FPO are acceptable. Only USA addresses are currently supported.
+              # acceptable; APO/FPO are acceptable. Only USA addresses are supported for the KYB
+              # and KYC workflows.
               address: nil,
               # Individual's date of birth, as an RFC 3339 date.
               dob: nil,
@@ -1033,21 +1105,12 @@ module Lithic
               sig { returns(String) }
               attr_accessor :city
 
-              # Valid country code. Only USA is currently supported, entered in uppercase ISO
-              # 3166-1 alpha-3 three-character format.
+              # Valid country code, entered in uppercase ISO 3166-1 alpha-3 three-character
+              # format. Supported countries depend on the onboarding workflow used for the
+              # account holder.
               sig { returns(String) }
               attr_accessor :country
 
-              # Valid postal code. Only USA ZIP codes are currently supported, entered as a
-              # five-digit ZIP or nine-digit ZIP+4.
-              sig { returns(String) }
-              attr_accessor :postal_code
-
-              # Valid state code. Only USA state codes are currently supported, entered in
-              # uppercase ISO 3166-2 two-character format.
-              sig { returns(String) }
-              attr_accessor :state
-
               # Unit or apartment number (if applicable).
               sig { returns(T.nilable(String)) }
               attr_reader :address2
@@ -1055,16 +1118,42 @@ module Lithic
               sig { params(address2: String).void }
               attr_writer :address2
 
+              # Valid postal code. For USA addresses, enter either a five-digit postal code or a
+              # nine-digit postal code (ZIP+4) using the format 12345-1234. Required for all
+              # countries except the following, which do not use postal codes: ABW, AGO, ARE,
+              # ATG, BDI, BEN, BFA, BHS, BLZ, BOL, BWA, CIV, CMR, COD, COG, COK, COM, DJI, DMA,
+              # ERI, FJI, GAB, GMB, GNQ, GRD, GUY, HKG, KIR, MAC, MLI, MRT, NIU, NRU, QAT, RWA,
+              # SLB, SLE, SSD, SUR, SXM, SYC, TGO, TKL, TLS, TON, TUV, UGA, VUT, YEM, ZWE
+              sig { returns(T.nilable(String)) }
+              attr_accessor :postal_code
+
+              # Valid state, province, or subdivision code, entered as the uppercase ISO 3166-2
+              # code for the country without the country prefix. For example, `CA` for
+              # California. Optional unless the address is in one of the following countries,
+              # where it is required:
+              #
+              # - `USA`
+              # - `CAN`
+              # - `AUS`
+              # - `CHN`
+              # - `KOR`
+              # - `MEX`
+              # - `MYS`
+              # - `NZL`
+              sig { returns(T.nilable(String)) }
+              attr_accessor :state
+
               # Individual's current address - PO boxes, UPS drops, and FedEx drops are not
-              # acceptable; APO/FPO are acceptable. Only USA addresses are currently supported.
+              # acceptable; APO/FPO are acceptable. Only USA addresses are supported for the KYB
+              # and KYC workflows.
               sig do
                 params(
                   address1: String,
                   city: String,
                   country: String,
-                  postal_code: String,
-                  state: String,
-                  address2: String
+                  address2: String,
+                  postal_code: T.nilable(String),
+                  state: T.nilable(String)
                 ).returns(T.attached_class)
               end
               def self.new(
@@ -1072,17 +1161,33 @@ module Lithic
                 address1:,
                 # Name of city.
                 city:,
-                # Valid country code. Only USA is currently supported, entered in uppercase ISO
-                # 3166-1 alpha-3 three-character format.
+                # Valid country code, entered in uppercase ISO 3166-1 alpha-3 three-character
+                # format. Supported countries depend on the onboarding workflow used for the
+                # account holder.
                 country:,
-                # Valid postal code. Only USA ZIP codes are currently supported, entered as a
-                # five-digit ZIP or nine-digit ZIP+4.
-                postal_code:,
-                # Valid state code. Only USA state codes are currently supported, entered in
-                # uppercase ISO 3166-2 two-character format.
-                state:,
                 # Unit or apartment number (if applicable).
-                address2: nil
+                address2: nil,
+                # Valid postal code. For USA addresses, enter either a five-digit postal code or a
+                # nine-digit postal code (ZIP+4) using the format 12345-1234. Required for all
+                # countries except the following, which do not use postal codes: ABW, AGO, ARE,
+                # ATG, BDI, BEN, BFA, BHS, BLZ, BOL, BWA, CIV, CMR, COD, COG, COK, COM, DJI, DMA,
+                # ERI, FJI, GAB, GMB, GNQ, GRD, GUY, HKG, KIR, MAC, MLI, MRT, NIU, NRU, QAT, RWA,
+                # SLB, SLE, SSD, SUR, SXM, SYC, TGO, TKL, TLS, TON, TUV, UGA, VUT, YEM, ZWE
+                postal_code: nil,
+                # Valid state, province, or subdivision code, entered as the uppercase ISO 3166-2
+                # code for the country without the country prefix. For example, `CA` for
+                # California. Optional unless the address is in one of the following countries,
+                # where it is required:
+                #
+                # - `USA`
+                # - `CAN`
+                # - `AUS`
+                # - `CHN`
+                # - `KOR`
+                # - `MEX`
+                # - `MYS`
+                # - `NZL`
+                state: nil
               )
               end
 
@@ -1092,9 +1197,9 @@ module Lithic
                     address1: String,
                     city: String,
                     country: String,
-                    postal_code: String,
-                    state: String,
-                    address2: String
+                    address2: String,
+                    postal_code: T.nilable(String),
+                    state: T.nilable(String)
                   }
                 )
               end

data/rbi/lithic/models/payment.rbi

@@ -102,7 +102,8 @@ module Lithic
       attr_accessor :external_bank_account_token
 
       # Key-value pairs for tagging resources. Tags allow you to associate arbitrary
-      # metadata with a resource for your own purposes.
+      # metadata with a resource for your own purposes. A resource can have at most 50
+      # tags, with keys up to 40 characters and values up to 500 characters
       sig { returns(T.nilable(T::Hash[Symbol, String])) }
       attr_reader :tags
 
@@ -196,7 +197,8 @@ module Lithic
         # External bank account token
         external_bank_account_token: nil,
         # Key-value pairs for tagging resources. Tags allow you to associate arbitrary
-        # metadata with a resource for your own purposes.
+        # metadata with a resource for your own purposes. A resource can have at most 50
+        # tags, with keys up to 40 characters and values up to 500 characters
         tags: nil,
         type: nil,
         # User-defined identifier

data/rbi/lithic/models/transaction.rbi

@@ -140,7 +140,8 @@ module Lithic
       attr_accessor :status
 
       # Key-value pairs for tagging resources. Tags allow you to associate arbitrary
-      # metadata with a resource for your own purposes.
+      # metadata with a resource for your own purposes. A resource can have at most 50
+      # tags, with keys up to 40 characters and values up to 500 characters
       sig { returns(T::Hash[Symbol, String]) }
       attr_accessor :tags
 
@@ -253,7 +254,8 @@ module Lithic
         # Status of the transaction.
         status:,
         # Key-value pairs for tagging resources. Tags allow you to associate arbitrary
-        # metadata with a resource for your own purposes.
+        # metadata with a resource for your own purposes. A resource can have at most 50
+        # tags, with keys up to 40 characters and values up to 500 characters
         tags:,
         token_info:,
         # Date and time when the transaction last updated. UTC time zone.

data/rbi/lithic/models/transaction_simulate_authorization_params.rbi

@@ -30,6 +30,15 @@ module Lithic
       sig { returns(String) }
       attr_accessor :pan
 
+      # 3-character alphabetic ISO 4217 currency code for the cardholder billing amount.
+      # Permitted values are USD, GBP, EUR and CAD, and any other ISO 4217 code returns
+      # a 422. Defaults to USD
+      sig { returns(T.nilable(String)) }
+      attr_reader :billing_currency
+
+      sig { params(billing_currency: String).void }
+      attr_writer :billing_currency
+
       # Merchant category code for the transaction to be simulated. A four-digit number
       # listed in ISO 18245. Supported merchant category codes can be found
       # [here](https://docs.lithic.com/docs/transactions#merchant-category-codes-mccs).
@@ -75,8 +84,10 @@ module Lithic
       sig { params(merchant_amount: Integer).void }
       attr_writer :merchant_amount
 
-      # 3-character alphabetic ISO 4217 currency code. Note: Simulator only accepts USD,
-      # GBP, EUR and defaults to GBP if another ISO 4217 code is provided
+      # 3-character alphabetic ISO 4217 currency code for the merchant amount. Only used
+      # when merchant_amount is set, and defaults to GBP in that case. Without
+      # merchant_amount, the merchant amount uses the billing currency. Permitted values
+      # are USD, GBP, EUR and CAD, and any other ISO 4217 code returns a 422
       sig { returns(T.nilable(String)) }
       attr_reader :merchant_currency
 
@@ -99,6 +110,17 @@ module Lithic
       sig { params(pin: String).void }
       attr_writer :pin
 
+      # 3-character alphabetic ISO 4217 currency code for the settlement amount.
+      # Permitted values are USD, GBP, EUR and CAD, and any other ISO 4217 code returns
+      # a 422. Defaults to the value of billing_currency. Only single message
+      # (financial) authorizations carry a settlement amount, and the value is ignored
+      # for dual message authorizations
+      sig { returns(T.nilable(String)) }
+      attr_reader :settlement_currency
+
+      sig { params(settlement_currency: String).void }
+      attr_writer :settlement_currency
+
       # Type of event to simulate.
       #
       # - `AUTHORIZATION` is a dual message purchase authorization, meaning a subsequent
@@ -137,6 +159,7 @@ module Lithic
           amount: Integer,
           descriptor: String,
           pan: String,
+          billing_currency: String,
           mcc: String,
           merchant_acceptor_city: String,
           merchant_acceptor_country: String,
@@ -146,6 +169,7 @@ module Lithic
           merchant_currency: String,
           partial_approval_capable: T::Boolean,
           pin: String,
+          settlement_currency: String,
           status:
             Lithic::TransactionSimulateAuthorizationParams::Status::OrSymbol,
           request_options: Lithic::RequestOptions::OrHash
@@ -162,6 +186,10 @@ module Lithic
         descriptor:,
         # Sixteen digit card number.
         pan:,
+        # 3-character alphabetic ISO 4217 currency code for the cardholder billing amount.
+        # Permitted values are USD, GBP, EUR and CAD, and any other ISO 4217 code returns
+        # a 422. Defaults to USD
+        billing_currency: nil,
         # Merchant category code for the transaction to be simulated. A four-digit number
         # listed in ISO 18245. Supported merchant category codes can be found
         # [here](https://docs.lithic.com/docs/transactions#merchant-category-codes-mccs).
@@ -177,8 +205,10 @@ module Lithic
         # Amount of the transaction to be simulated in currency specified in
         # merchant_currency, including any acquirer fees.
         merchant_amount: nil,
-        # 3-character alphabetic ISO 4217 currency code. Note: Simulator only accepts USD,
-        # GBP, EUR and defaults to GBP if another ISO 4217 code is provided
+        # 3-character alphabetic ISO 4217 currency code for the merchant amount. Only used
+        # when merchant_amount is set, and defaults to GBP in that case. Without
+        # merchant_amount, the merchant amount uses the billing currency. Permitted values
+        # are USD, GBP, EUR and CAD, and any other ISO 4217 code returns a 422
         merchant_currency: nil,
         # Set to true if the terminal is capable of partial approval otherwise false.
         # Partial approval is when part of a transaction is approved and another payment
@@ -186,6 +216,12 @@ module Lithic
         partial_approval_capable: nil,
         # Simulate entering a PIN. If omitted, PIN check will not be performed.
         pin: nil,
+        # 3-character alphabetic ISO 4217 currency code for the settlement amount.
+        # Permitted values are USD, GBP, EUR and CAD, and any other ISO 4217 code returns
+        # a 422. Defaults to the value of billing_currency. Only single message
+        # (financial) authorizations carry a settlement amount, and the value is ignored
+        # for dual message authorizations
+        settlement_currency: nil,
         # Type of event to simulate.
         #
         # - `AUTHORIZATION` is a dual message purchase authorization, meaning a subsequent
@@ -213,6 +249,7 @@ module Lithic
             amount: Integer,
             descriptor: String,
             pan: String,
+            billing_currency: String,
             mcc: String,
             merchant_acceptor_city: String,
             merchant_acceptor_country: String,
@@ -222,6 +259,7 @@ module Lithic
             merchant_currency: String,
             partial_approval_capable: T::Boolean,
             pin: String,
+            settlement_currency: String,
             status:
               Lithic::TransactionSimulateAuthorizationParams::Status::OrSymbol,
             request_options: Lithic::RequestOptions

data/rbi/lithic/models/transaction_simulate_credit_authorization_advice_params.rbi

@@ -28,6 +28,15 @@ module Lithic
       sig { returns(String) }
       attr_accessor :pan
 
+      # 3-character alphabetic ISO 4217 currency code for the cardholder billing amount.
+      # Permitted values are USD, GBP, EUR and CAD, and any other ISO 4217 code returns
+      # a 422. Defaults to USD
+      sig { returns(T.nilable(String)) }
+      attr_reader :billing_currency
+
+      sig { params(billing_currency: String).void }
+      attr_writer :billing_currency
+
       # Merchant category code for the transaction to be simulated. A four-digit number
       # listed in ISO 18245. Supported merchant category codes can be found
       # [here](https://docs.lithic.com/docs/transactions#merchant-category-codes-mccs).
@@ -70,6 +79,7 @@ module Lithic
           amount: Integer,
           descriptor: String,
           pan: String,
+          billing_currency: String,
           mcc: String,
           merchant_acceptor_city: String,
           merchant_acceptor_country: String,
@@ -87,6 +97,10 @@ module Lithic
         descriptor:,
         # Sixteen digit card number.
         pan:,
+        # 3-character alphabetic ISO 4217 currency code for the cardholder billing amount.
+        # Permitted values are USD, GBP, EUR and CAD, and any other ISO 4217 code returns
+        # a 422. Defaults to USD
+        billing_currency: nil,
         # Merchant category code for the transaction to be simulated. A four-digit number
         # listed in ISO 18245. Supported merchant category codes can be found
         # [here](https://docs.lithic.com/docs/transactions#merchant-category-codes-mccs).
@@ -109,6 +123,7 @@ module Lithic
             amount: Integer,
             descriptor: String,
             pan: String,
+            billing_currency: String,
             mcc: String,
             merchant_acceptor_city: String,
             merchant_acceptor_country: String,