lithic 0.21.0 → 0.22.0

data/rbi/lithic/models/auth_rules/auth_rule_condition.rbi

@@ -39,18 +39,27 @@ module Lithic
         # - `TRANSACTION_AMOUNT`: The base transaction amount (in cents) plus the acquirer
         #   fee field in the settlement/cardholder billing currency. This is the amount
         #   the issuer should authorize against unless the issuer is paying the acquirer
-        #   fee on behalf of the cardholder.
+        #   fee on behalf of the cardholder. Use an integer value.
+        # - `CASH_AMOUNT`: The cash amount of the transaction in minor units (cents). This
+        #   represents the amount of cash being withdrawn or advanced. Use an integer
+        #   value.
         # - `RISK_SCORE`: Network-provided score assessing risk level associated with a
         #   given authorization. Scores are on a range of 0-999, with 0 representing the
         #   lowest risk and 999 representing the highest risk. For Visa transactions,
         #   where the raw score has a range of 0-99, Lithic will normalize the score by
-        #   multiplying the raw score by 10x.
+        #   multiplying the raw score by 10x. Use an integer value.
         # - `CARD_TRANSACTION_COUNT_15M`: The number of transactions on the card in the
-        #   trailing 15 minutes before the authorization.
+        #   trailing 15 minutes before the authorization. Use an integer value.
         # - `CARD_TRANSACTION_COUNT_1H`: The number of transactions on the card in the
-        #   trailing hour up and until the authorization.
+        #   trailing hour up and until the authorization. Use an integer value.
         # - `CARD_TRANSACTION_COUNT_24H`: The number of transactions on the card in the
-        #   trailing 24 hours up and until the authorization.
+        #   trailing 24 hours up and until the authorization. Use an integer value.
+        # - `CARD_DECLINE_COUNT_15M`: The number of declined transactions on the card in
+        #   the trailing 15 minutes before the authorization. Use an integer value.
+        # - `CARD_DECLINE_COUNT_1H`: The number of declined transactions on the card in
+        #   the trailing hour up and until the authorization. Use an integer value.
+        # - `CARD_DECLINE_COUNT_24H`: The number of declined transactions on the card in
+        #   the trailing 24 hours up and until the authorization. Use an integer value.
         # - `CARD_STATE`: The current state of the card associated with the transaction.
         #   Valid values are `CLOSED`, `OPEN`, `PAUSED`, `PENDING_ACTIVATION`,
         #   `PENDING_FULFILLMENT`.
@@ -61,9 +70,73 @@ module Lithic
         # - `WALLET_TYPE`: For transactions using a digital wallet token, indicates the
         #   source of the token. Valid values are `APPLE_PAY`, `GOOGLE_PAY`,
         #   `SAMSUNG_PAY`, `MASTERPASS`, `MERCHANT`, `OTHER`, `NONE`.
+        # - `TRANSACTION_INITIATOR`: The entity that initiated the transaction indicates
+        #   the source of the token. Valid values are `CARDHOLDER`, `MERCHANT`, `UNKNOWN`.
         # - `ADDRESS_MATCH`: Lithic's evaluation result comparing transaction's address
         #   data with the cardholder KYC data if it exists. Valid values are `MATCH`,
         #   `MATCH_ADDRESS_ONLY`, `MATCH_ZIP_ONLY`,`MISMATCH`,`NOT_PRESENT`.
+        # - `SERVICE_LOCATION_STATE`: The state/province code (ISO 3166-2) where the
+        #   cardholder received the service, e.g. "NY". When a service location is present
+        #   in the network data, the service location state is used. Otherwise, falls back
+        #   to the card acceptor state.
+        # - `SERVICE_LOCATION_POSTAL_CODE`: The postal code where the cardholder received
+        #   the service, e.g. "10001". When a service location is present in the network
+        #   data, the service location postal code is used. Otherwise, falls back to the
+        #   card acceptor postal code.
+        # - `CARD_AGE`: The age of the card in seconds at the time of the authorization.
+        #   Use an integer value.
+        # - `IS_DOMESTIC`: Whether the merchant's country matches the card program's
+        #   issuing country. Valid values are `TRUE`, `FALSE`. For programs with no
+        #   issuing country configured, this attribute does not evaluate.
+        # - `ACCOUNT_AGE`: The age of the account holder's account in seconds at the time
+        #   of the authorization. Use an integer value. For programs where Lithic does not
+        #   manage or retain account holder data, this attribute does not evaluate.
+        # - `AMOUNT_Z_SCORE`: The z-score of the transaction amount relative to the
+        #   entity's transaction history. Null if fewer than 30 approved transactions in
+        #   the specified window. Requires `parameters.scope` and `parameters.interval`.
+        #   Use a decimal value.
+        # - `AVG_TRANSACTION_AMOUNT`: The average approved transaction amount for the
+        #   entity over the specified window, in cents. Requires `parameters.scope` and
+        #   `parameters.interval`. Use a decimal value.
+        # - `STDEV_TRANSACTION_AMOUNT`: The standard deviation of approved transaction
+        #   amounts for the entity over the specified window, in cents. Null if fewer than
+        #   30 approved transactions in the specified window. Requires `parameters.scope`
+        #   and `parameters.interval`. Use a decimal value.
+        # - `IS_NEW_COUNTRY`: Whether the transaction's merchant country has not been seen
+        #   in the entity's transaction history. Valid values are `TRUE`, `FALSE`.
+        #   Requires `parameters.scope`.
+        # - `IS_NEW_MCC`: Whether the transaction's MCC has not been seen in the entity's
+        #   transaction history. Valid values are `TRUE`, `FALSE`. Requires
+        #   `parameters.scope`.
+        # - `IS_FIRST_TRANSACTION`: Whether this is the first transaction for the entity.
+        #   Valid values are `TRUE`, `FALSE`. Requires `parameters.scope`.
+        # - `CONSECUTIVE_DECLINES`: The number of consecutive declined transactions for
+        #   the entity over the last 30 days (rolling). Requires `parameters.scope`. Not
+        #   supported for `BUSINESS_ACCOUNT` scope. Use an integer value.
+        # - `TIME_SINCE_LAST_TRANSACTION`: The number of days since the last approved
+        #   transaction for the entity, rounded to the nearest whole day. Requires
+        #   `parameters.scope`. Use an integer value.
+        # - `DISTINCT_COUNTRY_COUNT`: The number of distinct merchant countries seen in
+        #   the entity's transaction history. Requires `parameters.scope`. Use an integer
+        #   value.
+        # - `IS_NEW_MERCHANT`: Whether the card acceptor ID has not been seen in the
+        #   card's approved transaction history (capped at the 1000 most recently seen
+        #   merchants). Valid values are `TRUE`, `FALSE`. Card-scoped only; no
+        #   `parameters` required.
+        # - `THREE_DS_SUCCESS_RATE`: The 3DS authentication success rate for the card, as
+        #   a percentage from 0.0 to 100.0. Card-scoped only; no `parameters` required.
+        #   Use a decimal value.
+        # - `TRAVEL_SPEED`: The estimated speed of travel derived from the distance
+        #   between the postal code centers of the last card-present transaction and the
+        #   current transaction, divided by the elapsed time. Null if there is no prior
+        #   card-present transaction, if either postal code cannot be geocoded, or if
+        #   elapsed time is zero. Requires `parameters.unit` set to `MPH` or `KPH`. Use a
+        #   decimal value.
+        # - `DISTANCE_FROM_LAST_TRANSACTION`: The estimated distance between the postal
+        #   code centers of the last card-present transaction and the current transaction.
+        #   Null if there is no prior card-present transaction or if either postal code
+        #   cannot be geocoded. Requires `parameters.unit` set to `MILES` or `KILOMETERS`.
+        #   Use a decimal value.
         sig { returns(Lithic::AuthRules::ConditionalAttribute::OrSymbol) }
         attr_accessor :attribute
 
@@ -75,11 +148,30 @@ module Lithic
         sig { returns(Lithic::AuthRules::ConditionalValue::Variants) }
         attr_accessor :value
 
+        # Additional parameters for certain attributes. Required when `attribute` is one
+        # of `AMOUNT_Z_SCORE`, `AVG_TRANSACTION_AMOUNT`, `STDEV_TRANSACTION_AMOUNT`,
+        # `IS_NEW_COUNTRY`, `IS_NEW_MCC`, `IS_FIRST_TRANSACTION`, `CONSECUTIVE_DECLINES`,
+        # `TIME_SINCE_LAST_TRANSACTION`, or `DISTINCT_COUNTRY_COUNT` (require `scope`); or
+        # `TRAVEL_SPEED` or `DISTANCE_FROM_LAST_TRANSACTION` (require `unit`). Not used
+        # for other attributes.
+        sig do
+          returns(T.nilable(Lithic::AuthRules::AuthRuleCondition::Parameters))
+        end
+        attr_reader :parameters
+
+        sig do
+          params(
+            parameters: Lithic::AuthRules::AuthRuleCondition::Parameters::OrHash
+          ).void
+        end
+        attr_writer :parameters
+
         sig do
           params(
             attribute: Lithic::AuthRules::ConditionalAttribute::OrSymbol,
             operation: Lithic::AuthRules::ConditionalOperation::OrSymbol,
-            value: Lithic::AuthRules::ConditionalValue::Variants
+            value: Lithic::AuthRules::ConditionalValue::Variants,
+            parameters: Lithic::AuthRules::AuthRuleCondition::Parameters::OrHash
           ).returns(T.attached_class)
         end
         def self.new(
@@ -108,18 +200,27 @@ module Lithic
           # - `TRANSACTION_AMOUNT`: The base transaction amount (in cents) plus the acquirer
           #   fee field in the settlement/cardholder billing currency. This is the amount
           #   the issuer should authorize against unless the issuer is paying the acquirer
-          #   fee on behalf of the cardholder.
+          #   fee on behalf of the cardholder. Use an integer value.
+          # - `CASH_AMOUNT`: The cash amount of the transaction in minor units (cents). This
+          #   represents the amount of cash being withdrawn or advanced. Use an integer
+          #   value.
           # - `RISK_SCORE`: Network-provided score assessing risk level associated with a
           #   given authorization. Scores are on a range of 0-999, with 0 representing the
           #   lowest risk and 999 representing the highest risk. For Visa transactions,
           #   where the raw score has a range of 0-99, Lithic will normalize the score by
-          #   multiplying the raw score by 10x.
+          #   multiplying the raw score by 10x. Use an integer value.
           # - `CARD_TRANSACTION_COUNT_15M`: The number of transactions on the card in the
-          #   trailing 15 minutes before the authorization.
+          #   trailing 15 minutes before the authorization. Use an integer value.
           # - `CARD_TRANSACTION_COUNT_1H`: The number of transactions on the card in the
-          #   trailing hour up and until the authorization.
+          #   trailing hour up and until the authorization. Use an integer value.
           # - `CARD_TRANSACTION_COUNT_24H`: The number of transactions on the card in the
-          #   trailing 24 hours up and until the authorization.
+          #   trailing 24 hours up and until the authorization. Use an integer value.
+          # - `CARD_DECLINE_COUNT_15M`: The number of declined transactions on the card in
+          #   the trailing 15 minutes before the authorization. Use an integer value.
+          # - `CARD_DECLINE_COUNT_1H`: The number of declined transactions on the card in
+          #   the trailing hour up and until the authorization. Use an integer value.
+          # - `CARD_DECLINE_COUNT_24H`: The number of declined transactions on the card in
+          #   the trailing 24 hours up and until the authorization. Use an integer value.
           # - `CARD_STATE`: The current state of the card associated with the transaction.
           #   Valid values are `CLOSED`, `OPEN`, `PAUSED`, `PENDING_ACTIVATION`,
           #   `PENDING_FULFILLMENT`.
@@ -130,14 +231,85 @@ module Lithic
           # - `WALLET_TYPE`: For transactions using a digital wallet token, indicates the
           #   source of the token. Valid values are `APPLE_PAY`, `GOOGLE_PAY`,
           #   `SAMSUNG_PAY`, `MASTERPASS`, `MERCHANT`, `OTHER`, `NONE`.
+          # - `TRANSACTION_INITIATOR`: The entity that initiated the transaction indicates
+          #   the source of the token. Valid values are `CARDHOLDER`, `MERCHANT`, `UNKNOWN`.
           # - `ADDRESS_MATCH`: Lithic's evaluation result comparing transaction's address
           #   data with the cardholder KYC data if it exists. Valid values are `MATCH`,
           #   `MATCH_ADDRESS_ONLY`, `MATCH_ZIP_ONLY`,`MISMATCH`,`NOT_PRESENT`.
+          # - `SERVICE_LOCATION_STATE`: The state/province code (ISO 3166-2) where the
+          #   cardholder received the service, e.g. "NY". When a service location is present
+          #   in the network data, the service location state is used. Otherwise, falls back
+          #   to the card acceptor state.
+          # - `SERVICE_LOCATION_POSTAL_CODE`: The postal code where the cardholder received
+          #   the service, e.g. "10001". When a service location is present in the network
+          #   data, the service location postal code is used. Otherwise, falls back to the
+          #   card acceptor postal code.
+          # - `CARD_AGE`: The age of the card in seconds at the time of the authorization.
+          #   Use an integer value.
+          # - `IS_DOMESTIC`: Whether the merchant's country matches the card program's
+          #   issuing country. Valid values are `TRUE`, `FALSE`. For programs with no
+          #   issuing country configured, this attribute does not evaluate.
+          # - `ACCOUNT_AGE`: The age of the account holder's account in seconds at the time
+          #   of the authorization. Use an integer value. For programs where Lithic does not
+          #   manage or retain account holder data, this attribute does not evaluate.
+          # - `AMOUNT_Z_SCORE`: The z-score of the transaction amount relative to the
+          #   entity's transaction history. Null if fewer than 30 approved transactions in
+          #   the specified window. Requires `parameters.scope` and `parameters.interval`.
+          #   Use a decimal value.
+          # - `AVG_TRANSACTION_AMOUNT`: The average approved transaction amount for the
+          #   entity over the specified window, in cents. Requires `parameters.scope` and
+          #   `parameters.interval`. Use a decimal value.
+          # - `STDEV_TRANSACTION_AMOUNT`: The standard deviation of approved transaction
+          #   amounts for the entity over the specified window, in cents. Null if fewer than
+          #   30 approved transactions in the specified window. Requires `parameters.scope`
+          #   and `parameters.interval`. Use a decimal value.
+          # - `IS_NEW_COUNTRY`: Whether the transaction's merchant country has not been seen
+          #   in the entity's transaction history. Valid values are `TRUE`, `FALSE`.
+          #   Requires `parameters.scope`.
+          # - `IS_NEW_MCC`: Whether the transaction's MCC has not been seen in the entity's
+          #   transaction history. Valid values are `TRUE`, `FALSE`. Requires
+          #   `parameters.scope`.
+          # - `IS_FIRST_TRANSACTION`: Whether this is the first transaction for the entity.
+          #   Valid values are `TRUE`, `FALSE`. Requires `parameters.scope`.
+          # - `CONSECUTIVE_DECLINES`: The number of consecutive declined transactions for
+          #   the entity over the last 30 days (rolling). Requires `parameters.scope`. Not
+          #   supported for `BUSINESS_ACCOUNT` scope. Use an integer value.
+          # - `TIME_SINCE_LAST_TRANSACTION`: The number of days since the last approved
+          #   transaction for the entity, rounded to the nearest whole day. Requires
+          #   `parameters.scope`. Use an integer value.
+          # - `DISTINCT_COUNTRY_COUNT`: The number of distinct merchant countries seen in
+          #   the entity's transaction history. Requires `parameters.scope`. Use an integer
+          #   value.
+          # - `IS_NEW_MERCHANT`: Whether the card acceptor ID has not been seen in the
+          #   card's approved transaction history (capped at the 1000 most recently seen
+          #   merchants). Valid values are `TRUE`, `FALSE`. Card-scoped only; no
+          #   `parameters` required.
+          # - `THREE_DS_SUCCESS_RATE`: The 3DS authentication success rate for the card, as
+          #   a percentage from 0.0 to 100.0. Card-scoped only; no `parameters` required.
+          #   Use a decimal value.
+          # - `TRAVEL_SPEED`: The estimated speed of travel derived from the distance
+          #   between the postal code centers of the last card-present transaction and the
+          #   current transaction, divided by the elapsed time. Null if there is no prior
+          #   card-present transaction, if either postal code cannot be geocoded, or if
+          #   elapsed time is zero. Requires `parameters.unit` set to `MPH` or `KPH`. Use a
+          #   decimal value.
+          # - `DISTANCE_FROM_LAST_TRANSACTION`: The estimated distance between the postal
+          #   code centers of the last card-present transaction and the current transaction.
+          #   Null if there is no prior card-present transaction or if either postal code
+          #   cannot be geocoded. Requires `parameters.unit` set to `MILES` or `KILOMETERS`.
+          #   Use a decimal value.
           attribute:,
           # The operation to apply to the attribute
           operation:,
           # A regex string, to be used with `MATCHES` or `DOES_NOT_MATCH`
-          value:
+          value:,
+          # Additional parameters for certain attributes. Required when `attribute` is one
+          # of `AMOUNT_Z_SCORE`, `AVG_TRANSACTION_AMOUNT`, `STDEV_TRANSACTION_AMOUNT`,
+          # `IS_NEW_COUNTRY`, `IS_NEW_MCC`, `IS_FIRST_TRANSACTION`, `CONSECUTIVE_DECLINES`,
+          # `TIME_SINCE_LAST_TRANSACTION`, or `DISTINCT_COUNTRY_COUNT` (require `scope`); or
+          # `TRAVEL_SPEED` or `DISTANCE_FROM_LAST_TRANSACTION` (require `unit`). Not used
+          # for other attributes.
+          parameters: nil
         )
         end
 
@@ -146,12 +318,269 @@ module Lithic
             {
               attribute: Lithic::AuthRules::ConditionalAttribute::OrSymbol,
               operation: Lithic::AuthRules::ConditionalOperation::OrSymbol,
-              value: Lithic::AuthRules::ConditionalValue::Variants
+              value: Lithic::AuthRules::ConditionalValue::Variants,
+              parameters: Lithic::AuthRules::AuthRuleCondition::Parameters
             }
           )
         end
         def to_hash
         end
+
+        class Parameters < Lithic::Internal::Type::BaseModel
+          OrHash =
+            T.type_alias do
+              T.any(
+                Lithic::AuthRules::AuthRuleCondition::Parameters,
+                Lithic::Internal::AnyHash
+              )
+            end
+
+          # The time window for statistical attributes (`AMOUNT_Z_SCORE`,
+          # `AVG_TRANSACTION_AMOUNT`, `STDEV_TRANSACTION_AMOUNT`). Use `LIFETIME` for
+          # all-time history or a specific window (`7D`, `30D`, `90D`).
+          sig do
+            returns(
+              T.nilable(
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Interval::OrSymbol
+              )
+            )
+          end
+          attr_reader :interval
+
+          sig do
+            params(
+              interval:
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Interval::OrSymbol
+            ).void
+          end
+          attr_writer :interval
+
+          # The entity scope to evaluate the attribute against.
+          sig do
+            returns(
+              T.nilable(
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Scope::OrSymbol
+              )
+            )
+          end
+          attr_reader :scope
+
+          sig do
+            params(
+              scope:
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Scope::OrSymbol
+            ).void
+          end
+          attr_writer :scope
+
+          # The unit for impossible travel attributes. Required when `attribute` is
+          # `TRAVEL_SPEED` or `DISTANCE_FROM_LAST_TRANSACTION`.
+          #
+          # For `TRAVEL_SPEED`: `MPH` (miles per hour) or `KPH` (kilometers per hour).
+          #
+          # For `DISTANCE_FROM_LAST_TRANSACTION`: `MILES` or `KILOMETERS`.
+          sig do
+            returns(
+              T.nilable(
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Unit::OrSymbol
+              )
+            )
+          end
+          attr_reader :unit
+
+          sig do
+            params(
+              unit:
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Unit::OrSymbol
+            ).void
+          end
+          attr_writer :unit
+
+          # Additional parameters for certain attributes. Required when `attribute` is one
+          # of `AMOUNT_Z_SCORE`, `AVG_TRANSACTION_AMOUNT`, `STDEV_TRANSACTION_AMOUNT`,
+          # `IS_NEW_COUNTRY`, `IS_NEW_MCC`, `IS_FIRST_TRANSACTION`, `CONSECUTIVE_DECLINES`,
+          # `TIME_SINCE_LAST_TRANSACTION`, or `DISTINCT_COUNTRY_COUNT` (require `scope`); or
+          # `TRAVEL_SPEED` or `DISTANCE_FROM_LAST_TRANSACTION` (require `unit`). Not used
+          # for other attributes.
+          sig do
+            params(
+              interval:
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Interval::OrSymbol,
+              scope:
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Scope::OrSymbol,
+              unit:
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Unit::OrSymbol
+            ).returns(T.attached_class)
+          end
+          def self.new(
+            # The time window for statistical attributes (`AMOUNT_Z_SCORE`,
+            # `AVG_TRANSACTION_AMOUNT`, `STDEV_TRANSACTION_AMOUNT`). Use `LIFETIME` for
+            # all-time history or a specific window (`7D`, `30D`, `90D`).
+            interval: nil,
+            # The entity scope to evaluate the attribute against.
+            scope: nil,
+            # The unit for impossible travel attributes. Required when `attribute` is
+            # `TRAVEL_SPEED` or `DISTANCE_FROM_LAST_TRANSACTION`.
+            #
+            # For `TRAVEL_SPEED`: `MPH` (miles per hour) or `KPH` (kilometers per hour).
+            #
+            # For `DISTANCE_FROM_LAST_TRANSACTION`: `MILES` or `KILOMETERS`.
+            unit: nil
+          )
+          end
+
+          sig do
+            override.returns(
+              {
+                interval:
+                  Lithic::AuthRules::AuthRuleCondition::Parameters::Interval::OrSymbol,
+                scope:
+                  Lithic::AuthRules::AuthRuleCondition::Parameters::Scope::OrSymbol,
+                unit:
+                  Lithic::AuthRules::AuthRuleCondition::Parameters::Unit::OrSymbol
+              }
+            )
+          end
+          def to_hash
+          end
+
+          # The time window for statistical attributes (`AMOUNT_Z_SCORE`,
+          # `AVG_TRANSACTION_AMOUNT`, `STDEV_TRANSACTION_AMOUNT`). Use `LIFETIME` for
+          # all-time history or a specific window (`7D`, `30D`, `90D`).
+          module Interval
+            extend Lithic::Internal::Type::Enum
+
+            TaggedSymbol =
+              T.type_alias do
+                T.all(
+                  Symbol,
+                  Lithic::AuthRules::AuthRuleCondition::Parameters::Interval
+                )
+              end
+            OrSymbol = T.type_alias { T.any(Symbol, String) }
+
+            LIFETIME =
+              T.let(
+                :LIFETIME,
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Interval::TaggedSymbol
+              )
+            INTERVAL_7_D =
+              T.let(
+                :"7D",
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Interval::TaggedSymbol
+              )
+            INTERVAL_30_D =
+              T.let(
+                :"30D",
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Interval::TaggedSymbol
+              )
+            INTERVAL_90_D =
+              T.let(
+                :"90D",
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Interval::TaggedSymbol
+              )
+
+            sig do
+              override.returns(
+                T::Array[
+                  Lithic::AuthRules::AuthRuleCondition::Parameters::Interval::TaggedSymbol
+                ]
+              )
+            end
+            def self.values
+            end
+          end
+
+          # The entity scope to evaluate the attribute against.
+          module Scope
+            extend Lithic::Internal::Type::Enum
+
+            TaggedSymbol =
+              T.type_alias do
+                T.all(
+                  Symbol,
+                  Lithic::AuthRules::AuthRuleCondition::Parameters::Scope
+                )
+              end
+            OrSymbol = T.type_alias { T.any(Symbol, String) }
+
+            CARD =
+              T.let(
+                :CARD,
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Scope::TaggedSymbol
+              )
+            ACCOUNT =
+              T.let(
+                :ACCOUNT,
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Scope::TaggedSymbol
+              )
+            BUSINESS_ACCOUNT =
+              T.let(
+                :BUSINESS_ACCOUNT,
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Scope::TaggedSymbol
+              )
+
+            sig do
+              override.returns(
+                T::Array[
+                  Lithic::AuthRules::AuthRuleCondition::Parameters::Scope::TaggedSymbol
+                ]
+              )
+            end
+            def self.values
+            end
+          end
+
+          # The unit for impossible travel attributes. Required when `attribute` is
+          # `TRAVEL_SPEED` or `DISTANCE_FROM_LAST_TRANSACTION`.
+          #
+          # For `TRAVEL_SPEED`: `MPH` (miles per hour) or `KPH` (kilometers per hour).
+          #
+          # For `DISTANCE_FROM_LAST_TRANSACTION`: `MILES` or `KILOMETERS`.
+          module Unit
+            extend Lithic::Internal::Type::Enum
+
+            TaggedSymbol =
+              T.type_alias do
+                T.all(
+                  Symbol,
+                  Lithic::AuthRules::AuthRuleCondition::Parameters::Unit
+                )
+              end
+            OrSymbol = T.type_alias { T.any(Symbol, String) }
+
+            MPH =
+              T.let(
+                :MPH,
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Unit::TaggedSymbol
+              )
+            KPH =
+              T.let(
+                :KPH,
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Unit::TaggedSymbol
+              )
+            MILES =
+              T.let(
+                :MILES,
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Unit::TaggedSymbol
+              )
+            KILOMETERS =
+              T.let(
+                :KILOMETERS,
+                Lithic::AuthRules::AuthRuleCondition::Parameters::Unit::TaggedSymbol
+              )
+
+            sig do
+              override.returns(
+                T::Array[
+                  Lithic::AuthRules::AuthRuleCondition::Parameters::Unit::TaggedSymbol
+                ]
+              )
+            end
+            def self.values
+            end
+          end
+        end
       end
     end
   end