libzmq 0.0.1

data/libzmq/zeromq-2.1.7/doc/zmq_epgm.txt

@@ -0,0 +1,162 @@
+zmq_pgm(7)
+==========
+
+
+NAME
+----
+zmq_pgm - 0MQ reliable multicast transport using PGM
+
+
+SYNOPSIS
+--------
+PGM (Pragmatic General Multicast) is a protocol for reliable multicast
+transport of data over IP networks.
+
+
+DESCRIPTION
+-----------
+0MQ implements two variants of PGM, the standard protocol where PGM datagrams
+are layered directly on top of IP datagrams as defined by RFC 3208 (the 'pgm'
+transport) and "Encapsulated PGM" where PGM datagrams are encapsulated inside
+UDP datagrams (the 'epgm' transport).
+
+The 'pgm' and 'epgm' transports can only be used with the 'ZMQ_PUB' and
+'ZMQ_SUB' socket types.
+
+Further, PGM sockets are rate limited by default and incur a performance
+penalty when used over a loop-back interface. For details, refer to the
+'ZMQ_RATE', 'ZMQ_RECOVERY_IVL' and 'ZMQ_MCAST_LOOP' options documented in
+linkzmq:zmq_setsockopt[3].
+
+CAUTION: The 'pgm' transport implementation requires access to raw IP sockets.
+Additional privileges may be required on some operating systems for this
+operation. Applications not requiring direct interoperability with other PGM
+implementations are encouraged to use the 'epgm' transport instead which does
+not require any special privileges.
+
+
+ADDRESSING
+----------
+A 0MQ address string consists of two parts as follows:
+'transport'`://`'endpoint'. The 'transport' part specifies the underlying
+transport protocol to use. For the standard PGM protocol, 'transport' shall be
+set to `pgm`. For the "Encapsulated PGM" protocol 'transport' shall be set to
+`epgm`. The meaning of the 'endpoint' part for both the 'pgm' and 'epgm'
+transport is defined below.
+
+
+Connecting a socket
+~~~~~~~~~~~~~~~~~~~
+When connecting a socket to a peer address using _zmq_connect()_ with the 'pgm'
+or 'epgm' transport, the 'endpoint' shall be interpreted as an 'interface'
+followed by a semicolon, followed by a 'multicast address', followed by a colon
+and a port number.
+
+An 'interface' may be specified by either of the following:
+
+* The interface name as defined by the operating system.
+* The primary IPv4 address assigned to the interface, in it's numeric
+  representation.
+
+NOTE: Interface names are not standardised in any way and should be assumed to
+be arbitrary and platform dependent. On Win32 platforms no short interface
+names exist, thus only the primary IPv4 address may be used to specify an
+'interface'.
+
+A 'multicast address' is specified by an IPv4 multicast address in it's numeric
+representation.
+
+
+WIRE FORMAT
+-----------
+Consecutive PGM datagrams are interpreted by 0MQ as a single continuous stream
+of data where 0MQ messages are not necessarily aligned with PGM datagram
+boundaries and a single 0MQ message may span several PGM datagrams. This stream
+of data consists of 0MQ messages encapsulated in 'frames' as described in
+linkzmq:zmq_tcp[7].
+
+
+PGM datagram payload
+~~~~~~~~~~~~~~~~~~~~
+The following ABNF grammar represents the payload of a single PGM datagram as
+used by 0MQ:
+
+....
+datagram               = (offset data)
+offset                 = 2OCTET
+data                   = *OCTET
+....
+
+In order for late joining consumers to be able to identify message boundaries,
+each PGM datagram payload starts with a 16-bit unsigned integer in network byte
+order specifying either the offset of the first message 'frame' in the datagram
+or containing the value `0xFFFF` if the datagram contains solely an
+intermediate part of a larger message.
+
+Note that offset specifies where the first message begins rather than the first
+message part. Thus, if there are trailing message parts at the beginning of
+the packet the offset ignores them and points to first initial message part
+in the packet.
+
+The following diagram illustrates the layout of a single PGM datagram payload:
+
+....
++------------------+----------------------+
+| offset (16 bits) |         data         |
++------------------+----------------------+
+....
+
+The following diagram further illustrates how three example 0MQ frames are laid
+out in consecutive PGM datagram payloads:
+
+....
+First datagram payload
++--------------+-------------+---------------------+
+| Frame offset |   Frame 1   |   Frame 2, part 1   |
+|    0x0000    | (Message 1) | (Message 2, part 1) |
++--------------+-------------+---------------------+
+
+Second datagram payload
++--------------+---------------------+
+| Frame offset |   Frame 2, part 2   |
+| 0xFFFF       | (Message 2, part 2) |
++--------------+---------------------+
+
+Third datagram payload
++--------------+----------------------------+-------------+
+| Frame offset |   Frame 2, final 8 bytes   |   Frame 3   |
+| 0x0008       | (Message 2, final 8 bytes) | (Message 3) |
++--------------+----------------------------+-------------+
+....
+
+
+EXAMPLE
+-------
+.Connecting a socket
+----
+/* Connecting to the multicast address 239.192.1.1, port 5555, */
+/* using the first Ethernet network interface on Linux */
+/* and the Encapsulated PGM protocol */
+rc = zmq_connect(socket, "epgm://eth0;239.192.1.1:5555");
+assert (rc == 0);
+/* Connecting to the multicast address 239.192.1.1, port 5555, */
+/* using the network interface with the address 192.168.1.1 */
+/* and the standard PGM protocol */
+rc = zmq_connect(socket, "pgm://192.168.1.1;239.192.1.1:5555");
+assert (rc == 0);
+----
+
+
+SEE ALSO
+--------
+linkzmq:zmq_connect[3]
+linkzmq:zmq_setsockopt[3]
+linkzmq:zmq_tcp[7]
+linkzmq:zmq_ipc[7]
+linkzmq:zmq_inproc[7]
+linkzmq:zmq[7]
+
+AUTHORS
+-------
+This 0MQ manual page was written by Martin Sustrik <sustrik@250bpm.com> and
+Martin Lucina <mato@kotelna.sk>.

data/libzmq/zeromq-2.1.7/doc/zmq_errno.3

@@ -0,0 +1,78 @@
+'\" t
+.\"     Title: zmq_errno
+.\"    Author: [see the "AUTHORS" section]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\"      Date: 05/06/2011
+.\"    Manual: 0MQ Manual
+.\"    Source: 0MQ 2.1.6
+.\"  Language: English
+.\"
+.TH "ZMQ_ERRNO" "3" "05/06/2011" "0MQ 2\&.1\&.6" "0MQ Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+zmq_errno \- retrieve value of errno for the calling thread
+.SH "SYNOPSIS"
+.sp
+\fBint zmq_errno (void);\fR
+.SH "DESCRIPTION"
+.sp
+The \fIzmq_errno()\fR function shall retrieve the value of the \fIerrno\fR variable for the calling thread\&.
+.sp
+The \fIzmq_errno()\fR function is provided to assist users on non\-POSIX systems who are experiencing issues with retrieving the correct value of \fIerrno\fR directly\&. Specifically, users on Win32 systems whose application is using a different C run\-time library from the C run\-time library in use by 0MQ will need to use \fIzmq_errno()\fR for correct operation\&.
+.if n \{\
+.sp
+.\}
+.RS 4
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+.br
+.ps +1
+\fBImportant\fR
+.ps -1
+.br
+.sp
+Users not experiencing issues with retrieving the correct value of \fIerrno\fR should not use this function and should instead access the \fIerrno\fR variable directly\&.
+.sp .5v
+.RE
+.SH "RETURN VALUE"
+.sp
+The \fIzmq_errno()\fR function shall return the value of the \fIerrno\fR variable for the calling thread\&.
+.SH "ERRORS"
+.sp
+No errors are defined\&.
+.SH "SEE ALSO"
+.sp
+\fBzmq\fR(7)
+.SH "AUTHORS"
+.sp
+This 0MQ manual page was written by Martin Sustrik <\m[blue]\fBsustrik@250bpm\&.com\fR\m[]\&\s-2\u[1]\d\s+2> and Martin Lucina <\m[blue]\fBmato@kotelna\&.sk\fR\m[]\&\s-2\u[2]\d\s+2>\&.
+.SH "NOTES"
+.IP " 1." 4
+sustrik@250bpm.com
+.RS 4
+\%mailto:sustrik@250bpm.com
+.RE
+.IP " 2." 4
+mato@kotelna.sk
+.RS 4
+\%mailto:mato@kotelna.sk
+.RE

data/libzmq/zeromq-2.1.7/doc/zmq_errno.html

@@ -0,0 +1,634 @@
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN"
+    "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
+<meta name="generator" content="AsciiDoc 8.5.2" />
+<title>zmq_errno(3)</title>
+<style type="text/css">
+/* Debug borders */
+p, li, dt, dd, div, pre, h1, h2, h3, h4, h5, h6 {
+/*
+  border: 1px solid red;
+*/
+}
+
+body {
+  margin: 1em 5% 1em 5%;
+}
+
+a {
+  color: blue;
+  text-decoration: underline;
+}
+a:visited {
+  color: fuchsia;
+}
+
+em {
+  font-style: italic;
+  color: navy;
+}
+
+strong {
+  font-weight: bold;
+  color: #083194;
+}
+
+tt {
+  color: navy;
+}
+
+h1, h2, h3, h4, h5, h6 {
+  color: #527bbd;
+  font-family: sans-serif;
+  margin-top: 1.2em;
+  margin-bottom: 0.5em;
+  line-height: 1.3;
+}
+
+h1, h2, h3 {
+  border-bottom: 2px solid silver;
+}
+h2 {
+  padding-top: 0.5em;
+}
+h3 {
+  float: left;
+}
+h3 + * {
+  clear: left;
+}
+
+div.sectionbody {
+  font-family: serif;
+  margin-left: 0;
+}
+
+hr {
+  border: 1px solid silver;
+}
+
+p {
+  margin-top: 0.5em;
+  margin-bottom: 0.5em;
+}
+
+ul, ol, li > p {
+  margin-top: 0;
+}
+
+pre {
+  padding: 0;
+  margin: 0;
+}
+
+span#author {
+  color: #527bbd;
+  font-family: sans-serif;
+  font-weight: bold;
+  font-size: 1.1em;
+}
+span#email {
+}
+span#revnumber, span#revdate, span#revremark {
+  font-family: sans-serif;
+}
+
+div#footer {
+  font-family: sans-serif;
+  font-size: small;
+  border-top: 2px solid silver;
+  padding-top: 0.5em;
+  margin-top: 4.0em;
+}
+div#footer-text {
+  float: left;
+  padding-bottom: 0.5em;
+}
+div#footer-badges {
+  float: right;
+  padding-bottom: 0.5em;
+}
+
+div#preamble {
+  margin-top: 1.5em;
+  margin-bottom: 1.5em;
+}
+div.tableblock, div.imageblock, div.exampleblock, div.verseblock,
+div.quoteblock, div.literalblock, div.listingblock, div.sidebarblock,
+div.admonitionblock {
+  margin-top: 1.0em;
+  margin-bottom: 1.5em;
+}
+div.admonitionblock {
+  margin-top: 2.0em;
+  margin-bottom: 2.0em;
+  margin-right: 10%;
+  color: #606060;
+}
+
+div.content { /* Block element content. */
+  padding: 0;
+}
+
+/* Block element titles. */
+div.title, caption.title {
+  color: #527bbd;
+  font-family: sans-serif;
+  font-weight: bold;
+  text-align: left;
+  margin-top: 1.0em;
+  margin-bottom: 0.5em;
+}
+div.title + * {
+  margin-top: 0;
+}
+
+td div.title:first-child {
+  margin-top: 0.0em;
+}
+div.content div.title:first-child {
+  margin-top: 0.0em;
+}
+div.content + div.title {
+  margin-top: 0.0em;
+}
+
+div.sidebarblock > div.content {
+  background: #ffffee;
+  border: 1px solid silver;
+  padding: 0.5em;
+}
+
+div.listingblock > div.content {
+  border: 1px solid silver;
+  background: #f4f4f4;
+  padding: 0.5em;
+}
+
+div.quoteblock, div.verseblock {
+  padding-left: 1.0em;
+  margin-left: 1.0em;
+  margin-right: 10%;
+  border-left: 5px solid #dddddd;
+  color: #777777;
+}
+
+div.quoteblock > div.attribution {
+  padding-top: 0.5em;
+  text-align: right;
+}
+
+div.verseblock > div.content {
+  white-space: pre;
+}
+div.verseblock > div.attribution {
+  padding-top: 0.75em;
+  text-align: left;
+}
+/* DEPRECATED: Pre version 8.2.7 verse style literal block. */
+div.verseblock + div.attribution {
+  text-align: left;
+}
+
+div.admonitionblock .icon {
+  vertical-align: top;
+  font-size: 1.1em;
+  font-weight: bold;
+  text-decoration: underline;
+  color: #527bbd;
+  padding-right: 0.5em;
+}
+div.admonitionblock td.content {
+  padding-left: 0.5em;
+  border-left: 3px solid #dddddd;
+}
+
+div.exampleblock > div.content {
+  border-left: 3px solid #dddddd;
+  padding-left: 0.5em;
+}
+
+div.imageblock div.content { padding-left: 0; }
+span.image img { border-style: none; }
+a.image:visited { color: white; }
+
+dl {
+  margin-top: 0.8em;
+  margin-bottom: 0.8em;
+}
+dt {
+  margin-top: 0.5em;
+  margin-bottom: 0;
+  font-style: normal;
+  color: navy;
+}
+dd > *:first-child {
+  margin-top: 0.1em;
+}
+
+ul, ol {
+    list-style-position: outside;
+}
+ol.arabic {
+  list-style-type: decimal;
+}
+ol.loweralpha {
+  list-style-type: lower-alpha;
+}
+ol.upperalpha {
+  list-style-type: upper-alpha;
+}
+ol.lowerroman {
+  list-style-type: lower-roman;
+}
+ol.upperroman {
+  list-style-type: upper-roman;
+}
+
+div.compact ul, div.compact ol,
+div.compact p, div.compact p,
+div.compact div, div.compact div {
+  margin-top: 0.1em;
+  margin-bottom: 0.1em;
+}
+
+div.tableblock > table {
+  border: 3px solid #527bbd;
+}
+thead, p.table.header {
+  font-family: sans-serif;
+  font-weight: bold;
+}
+tfoot {
+  font-weight: bold;
+}
+td > div.verse {
+  white-space: pre;
+}
+p.table {
+  margin-top: 0;
+}
+/* Because the table frame attribute is overriden by CSS in most browsers. */
+div.tableblock > table[frame="void"] {
+  border-style: none;
+}
+div.tableblock > table[frame="hsides"] {
+  border-left-style: none;
+  border-right-style: none;
+}
+div.tableblock > table[frame="vsides"] {
+  border-top-style: none;
+  border-bottom-style: none;
+}
+
+
+div.hdlist {
+  margin-top: 0.8em;
+  margin-bottom: 0.8em;
+}
+div.hdlist tr {
+  padding-bottom: 15px;
+}
+dt.hdlist1.strong, td.hdlist1.strong {
+  font-weight: bold;
+}
+td.hdlist1 {
+  vertical-align: top;
+  font-style: normal;
+  padding-right: 0.8em;
+  color: navy;
+}
+td.hdlist2 {
+  vertical-align: top;
+}
+div.hdlist.compact tr {
+  margin: 0;
+  padding-bottom: 0;
+}
+
+.comment {
+  background: yellow;
+}
+
+.footnote, .footnoteref {
+  font-size: 0.8em;
+}
+
+span.footnote, span.footnoteref {
+  vertical-align: super;
+}
+
+#footnotes {
+  margin: 20px 0 20px 0;
+  padding: 7px 0 0 0;
+}
+
+#footnotes div.footnote {
+  margin: 0 0 5px 0;
+}
+
+#footnotes hr {
+  border: none;
+  border-top: 1px solid silver;
+  height: 1px;
+  text-align: left;
+  margin-left: 0;
+  width: 20%;
+  min-width: 100px;
+}
+
+
+@media print {
+  div#footer-badges { display: none; }
+}
+
+div#toc {
+  margin-bottom: 2.5em;
+}
+
+div#toctitle {
+  color: #527bbd;
+  font-family: sans-serif;
+  font-size: 1.1em;
+  font-weight: bold;
+  margin-top: 1.0em;
+  margin-bottom: 0.1em;
+}
+
+div.toclevel1, div.toclevel2, div.toclevel3, div.toclevel4 {
+  margin-top: 0;
+  margin-bottom: 0;
+}
+div.toclevel2 {
+  margin-left: 2em;
+  font-size: 0.9em;
+}
+div.toclevel3 {
+  margin-left: 4em;
+  font-size: 0.9em;
+}
+div.toclevel4 {
+  margin-left: 6em;
+  font-size: 0.9em;
+}
+/* Overrides for manpage documents */
+h1 {
+  padding-top: 0.5em;
+  padding-bottom: 0.5em;
+  border-top: 2px solid silver;
+  border-bottom: 2px solid silver;
+}
+h2 {
+  border-style: none;
+}
+div.sectionbody {
+  margin-left: 5%;
+}
+
+@media print {
+  div#toc { display: none; }
+}
+
+/* Workarounds for IE6's broken and incomplete CSS2. */
+
+div.sidebar-content {
+  background: #ffffee;
+  border: 1px solid silver;
+  padding: 0.5em;
+}
+div.sidebar-title, div.image-title {
+  color: #527bbd;
+  font-family: sans-serif;
+  font-weight: bold;
+  margin-top: 0.0em;
+  margin-bottom: 0.5em;
+}
+
+div.listingblock div.content {
+  border: 1px solid silver;
+  background: #f4f4f4;
+  padding: 0.5em;
+}
+
+div.quoteblock-attribution {
+  padding-top: 0.5em;
+  text-align: right;
+}
+
+div.verseblock-content {
+  white-space: pre;
+}
+div.verseblock-attribution {
+  padding-top: 0.75em;
+  text-align: left;
+}
+
+div.exampleblock-content {
+  border-left: 3px solid #dddddd;
+  padding-left: 0.5em;
+}
+
+/* IE6 sets dynamically generated links as visited. */
+div#toc a:visited { color: blue; }
+</style>
+<script type="text/javascript">
+/*<![CDATA[*/
+window.onload = function(){asciidoc.footnotes();}
+var asciidoc = {  // Namespace.
+
+/////////////////////////////////////////////////////////////////////
+// Table Of Contents generator
+/////////////////////////////////////////////////////////////////////
+
+/* Author: Mihai Bazon, September 2002
+ * http://students.infoiasi.ro/~mishoo
+ *
+ * Table Of Content generator
+ * Version: 0.4
+ *
+ * Feel free to use this script under the terms of the GNU General Public
+ * License, as long as you do not remove or alter this notice.
+ */
+
+ /* modified by Troy D. Hanson, September 2006. License: GPL */
+ /* modified by Stuart Rackham, 2006, 2009. License: GPL */
+
+// toclevels = 1..4.
+toc: function (toclevels) {
+
+  function getText(el) {
+    var text = "";
+    for (var i = el.firstChild; i != null; i = i.nextSibling) {
+      if (i.nodeType == 3 /* Node.TEXT_NODE */) // IE doesn't speak constants.
+        text += i.data;
+      else if (i.firstChild != null)
+        text += getText(i);
+    }
+    return text;
+  }
+
+  function TocEntry(el, text, toclevel) {
+    this.element = el;
+    this.text = text;
+    this.toclevel = toclevel;
+  }
+
+  function tocEntries(el, toclevels) {
+    var result = new Array;
+    var re = new RegExp('[hH]([2-'+(toclevels+1)+'])');
+    // Function that scans the DOM tree for header elements (the DOM2
+    // nodeIterator API would be a better technique but not supported by all
+    // browsers).
+    var iterate = function (el) {
+      for (var i = el.firstChild; i != null; i = i.nextSibling) {
+        if (i.nodeType == 1 /* Node.ELEMENT_NODE */) {
+          var mo = re.exec(i.tagName);
+          if (mo && (i.getAttribute("class") || i.getAttribute("className")) != "float") {
+            result[result.length] = new TocEntry(i, getText(i), mo[1]-1);
+          }
+          iterate(i);
+        }
+      }
+    }
+    iterate(el);
+    return result;
+  }
+
+  var toc = document.getElementById("toc");
+  var entries = tocEntries(document.getElementById("content"), toclevels);
+  for (var i = 0; i < entries.length; ++i) {
+    var entry = entries[i];
+    if (entry.element.id == "")
+      entry.element.id = "_toc_" + i;
+    var a = document.createElement("a");
+    a.href = "#" + entry.element.id;
+    a.appendChild(document.createTextNode(entry.text));
+    var div = document.createElement("div");
+    div.appendChild(a);
+    div.className = "toclevel" + entry.toclevel;
+    toc.appendChild(div);
+  }
+  if (entries.length == 0)
+    toc.parentNode.removeChild(toc);
+},
+
+
+/////////////////////////////////////////////////////////////////////
+// Footnotes generator
+/////////////////////////////////////////////////////////////////////
+
+/* Based on footnote generation code from:
+ * http://www.brandspankingnew.net/archive/2005/07/format_footnote.html
+ */
+
+footnotes: function () {
+  var cont = document.getElementById("content");
+  var noteholder = document.getElementById("footnotes");
+  var spans = cont.getElementsByTagName("span");
+  var refs = {};
+  var n = 0;
+  for (i=0; i<spans.length; i++) {
+    if (spans[i].className == "footnote") {
+      n++;
+      // Use [\s\S] in place of . so multi-line matches work.
+      // Because JavaScript has no s (dotall) regex flag.
+      note = spans[i].innerHTML.match(/\s*\[([\s\S]*)]\s*/)[1];
+      noteholder.innerHTML +=
+        "<div class='footnote' id='_footnote_" + n + "'>" +
+        "<a href='#_footnoteref_" + n + "' title='Return to text'>" +
+        n + "</a>. " + note + "</div>";
+      spans[i].innerHTML =
+        "[<a id='_footnoteref_" + n + "' href='#_footnote_" + n +
+        "' title='View footnote' class='footnote'>" + n + "</a>]";
+      var id =spans[i].getAttribute("id");
+      if (id != null) refs["#"+id] = n;
+    }
+  }
+  if (n == 0)
+    noteholder.parentNode.removeChild(noteholder);
+  else {
+    // Process footnoterefs.
+    for (i=0; i<spans.length; i++) {
+      if (spans[i].className == "footnoteref") {
+        var href = spans[i].getElementsByTagName("a")[0].getAttribute("href");
+        href = href.match(/#.*/)[0];  // Because IE return full URL.
+        n = refs[href];
+        spans[i].innerHTML =
+          "[<a href='#_footnote_" + n +
+          "' title='View footnote' class='footnote'>" + n + "</a>]";
+      }
+    }
+  }
+}
+
+}
+/*]]>*/
+</script>
+</head>
+<body>
+<div id="header">
+<h1>
+zmq_errno(3) Manual Page
+</h1>
+<h2>NAME</h2>
+<div class="sectionbody">
+<p>zmq_errno -
+   retrieve value of errno for the calling thread
+</p>
+</div>
+</div>
+<div id="content">
+<h2 id="_synopsis">SYNOPSIS</h2>
+<div class="sectionbody">
+<div class="paragraph"><p><strong>int zmq_errno (void);</strong></p></div>
+</div>
+<h2 id="_description">DESCRIPTION</h2>
+<div class="sectionbody">
+<div class="paragraph"><p>The <em>zmq_errno()</em> function shall retrieve the value of the <em>errno</em> variable for
+the calling thread.</p></div>
+<div class="paragraph"><p>The <em>zmq_errno()</em> function is provided to assist users on non-POSIX systems who
+are experiencing issues with retrieving the correct value of <em>errno</em> directly.
+Specifically, users on Win32 systems whose application is using a different C
+run-time library from the C run-time library in use by ØMQ will need to use
+<em>zmq_errno()</em> for correct operation.</p></div>
+<div class="admonitionblock">
+<table><tr>
+<td class="icon">
+<div class="title">Important</div>
+</td>
+<td class="content">Users not experiencing issues with retrieving the correct value of
+<em>errno</em> should not use this function and should instead access the <em>errno</em>
+variable directly.</td>
+</tr></table>
+</div>
+</div>
+<h2 id="_return_value">RETURN VALUE</h2>
+<div class="sectionbody">
+<div class="paragraph"><p>The <em>zmq_errno()</em> function shall return the value of the <em>errno</em> variable for
+the calling thread.</p></div>
+</div>
+<h2 id="_errors">ERRORS</h2>
+<div class="sectionbody">
+<div class="paragraph"><p>No errors are defined.</p></div>
+</div>
+<h2 id="_see_also">SEE ALSO</h2>
+<div class="sectionbody">
+<div class="paragraph"><p><a href="zmq.html">zmq(7)</a></p></div>
+</div>
+<h2 id="_authors">AUTHORS</h2>
+<div class="sectionbody">
+<div class="paragraph"><p>This ØMQ manual page was written by Martin Sustrik &lt;<a href="mailto:sustrik@250bpm.com">sustrik@250bpm.com</a>&gt; and
+Martin Lucina &lt;<a href="mailto:mato@kotelna.sk">mato@kotelna.sk</a>&gt;.</p></div>
+</div>
+</div>
+<div id="footnotes"><hr /></div>
+<div id="footer">
+<div id="footer-text">
+ØMQ 2.1.4<br />
+Last updated 2011-03-13 17:59:17 CEST
+</div>
+</div>
+</body>
+</html>