libv8 5.3.332.38.5 → 5.6.326.50.0beta1

data/vendor/depot_tools/third_party/gsutil/gslib/commands/config.py

@@ -1,662 +0,0 @@
-# Copyright 2011 Google Inc. All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-import boto
-import datetime
-import multiprocessing
-import platform
-import os
-import signal
-import sys
-import time
-import webbrowser
-
-from boto.provider import Provider
-from gslib.command import Command
-from gslib.command import COMMAND_NAME
-from gslib.command import COMMAND_NAME_ALIASES
-from gslib.command import CONFIG_REQUIRED
-from gslib.command import FILE_URIS_OK
-from gslib.command import MAX_ARGS
-from gslib.command import MIN_ARGS
-from gslib.command import PROVIDER_URIS_OK
-from gslib.command import SUPPORTED_SUB_ARGS
-from gslib.command import URIS_START_ARG
-from gslib.exception import AbortException
-from gslib.exception import CommandException
-from gslib.help_provider import HELP_NAME
-from gslib.help_provider import HELP_NAME_ALIASES
-from gslib.help_provider import HELP_ONE_LINE_SUMMARY
-from gslib.help_provider import HELP_TEXT
-from gslib.help_provider import HelpType
-from gslib.help_provider import HELP_TYPE
-from gslib.util import HAVE_OAUTH2
-from gslib.util import TWO_MB
-
-_detailed_help_text = ("""
-<B>SYNOPSIS</B>
-  gsutil [-D] config [-a] [-b] [-f] [-o <file>] [-r] [-s <scope>] [-w]
-
-
-<B>DESCRIPTION</B>
-  The gsutil config command obtains access credentials for Google Cloud
-  Storage and writes a boto/gsutil configuration file containing the obtained
-  credentials along with a number of other configuration-controllable values.
-
-  Unless specified otherwise (see OPTIONS), the configuration file is written
-  to ~/.boto (i.e., the file .boto under the user's home directory). If the
-  default file already exists, an attempt is made to rename the existing file
-  to ~/.boto.bak; if that attempt fails the command will exit. A different
-  destination file can be specified with the -o option (see OPTIONS).
-
-  Because the boto configuration file contains your credentials you should
-  keep its file permissions set so no one but you has read access. (The file
-  is created read-only when you run gsutil config.)
-
-
-<B>CREDENTIALS</B>
-  By default gsutil config obtains OAuth2 credentials, and writes them
-  to the [Credentials] section of the configuration file. The -r, -w,
-  -f options (see OPTIONS below) cause gsutil config to request a token
-  with restricted scope; the resulting token will be restricted to read-only
-  operations, read-write operation, or all operations (including getacl/setacl/
-  getdefacl/setdefacl/disablelogging/enablelogging/getlogging operations). In
-  addition, -s <scope> can be used to request additional (non-Google-Storage)
-  scopes.
-
-  If you want to use credentials based on access key and secret (the older
-  authentication method before OAuth2 was supported) instead of OAuth2,
-  see help about the -a option in the OPTIONS section.
-
-  If you wish to use gsutil with other providers (or to copy data back and
-  forth between multiple providers) you can edit their credentials into the
-  [Credentials] section after creating the initial configuration file.
-
-
-<B>CONFIGURATION FILE SELECTION PROCEDURE</B>
-  By default, gsutil will look for the configuration file in /etc/boto.cfg and
-  ~/.boto. You can override this choice by setting the BOTO_CONFIG environment
-  variable. This is also useful if you have several different identities or
-  cloud storage environments: By setting up the credentials and any additional
-  configuration in separate files for each, you can switch environments by
-  changing environment variables.
-
-  You can also set up a path of configuration files, by setting the BOTO_PATH
-  environment variable to contain a ":" delimited path. For example setting
-  the BOTO_PATH environment variable to:
-
-    /etc/projects/my_group_project.boto.cfg:/home/mylogin/.boto
-
-  will cause gsutil to load each configuration file found in the path in
-  order. This is useful if you want to set up some shared configuration
-  state among many users: The shared state can go in the central shared file
-  ( /etc/projects/my_group_project.boto.cfg) and each user's individual
-  credentials can be placed in the configuration file in each of their home
-  directories. (For security reasons users should never share credentials
-  via a shared configuration file.)
-
-
-<B>CONFIGURATION FILE STRUCTURE</B>
-  The configuration file contains a number of sections: [Credentials],
-  [Boto], [GSUtil], and [OAuth2]. If you edit the file make sure to edit the
-  appropriate section (discussed below), and to be careful not to mis-edit
-  any of the setting names (like "gs_access_key_id") and not to remove the
-  section delimiters (like "[Credentials]").
-
-
-<B>ADDITIONAL CONFIGURATION-CONTROLLABLE FEATURES</B>
-  With the exception of setting up gsutil to work through a proxy (see
-  below), most users won't need to edit values in the boto configuration file;
-  values found in there tend to be of more specialized use than command line
-  option-controllable features.
-
-  The following are the currently defined configuration settings, broken
-  down by section. Their use is documented in comments preceding each, in
-  the configuration file. If you see a setting you want to change that's not
-  listed in your current file, see the section below on Updating to the Latest
-  Configuration File.
-
-  The currently supported settings, are, by section:
-  [Boto]
-    proxy
-    proxy_port
-    proxy_user
-    proxy_pass
-    is_secure
-    https_validate_certificates
-    send_crlf_after_proxy_auth_headers
-    debug
-    num_retries
-
-  [GSUtil]
-    resumable_threshold
-    resumable_tracker_dir
-    parallel_process_count
-    parallel_thread_count
-    default_api_version
-    default_project_id
-    use_magicfile
-
-  [OAuth2]
-    token_cache
-    token_cache
-    client_id
-    client_secret
-    provider_label
-    provider_authorization_uri
-    provider_token_uri
-
-
-<B>UPDATING TO THE LATEST CONFIGURATION FILE</B>
-  We add new configuration controllable features to the boto configuration file
-  over time, but most gsutil users create a configuration file once and then
-  keep it for a long time, so new features aren't apparent when you update
-  to a newer version of gsutil. If you want to get the latest configuration
-  file (which includes all the latest settings and documentation about each)
-  you can rename your current file (e.g., to '.boto_old'), run gsutil config,
-  and then edit any configuration settings you wanted from your old file
-  into the newly created file. Note, however, that if you're using OAuth2
-  credentials and you go back through the OAuth2 configuration dialog it will
-  invalidate your previous OAuth2 credentials.
-
-  If no explicit scope option is given, -f (full control) is assumed by default.
-
-
-<B>OPTIONS</B>
-  -a          Prompt for Google Cloud Storage access key and secret (the older
-              authentication method before OAuth2 was supported) instead of
-              obtaining an OAuth2 token.
-
-  -b          Causes gsutil config to launch a browser to obtain OAuth2 approval
-              and the project ID instead of showing the URL for each and asking
-              the user to open the browser. This will probably not work as
-              expected if you are running gsutil from an ssh window, or using
-              gsutil on Windows.
-
-  -f          Request token with full-control access (default).
-
-  -o <file>   Write the configuration to <file> instead of ~/.boto.
-              Use '-' for stdout.
-
-  -r          Request token restricted to read-only access.
-
-  -s <scope>  Request additional OAuth2 <scope>.
-
-  -w          Request token restricted to read-write access.
-""")
-
-
-try:
-  from oauth2_plugin import oauth2_helper
-except ImportError:
-  pass
-
-GOOG_API_CONSOLE_URI = 'http://code.google.com/apis/console'
-
-SCOPE_FULL_CONTROL = 'https://www.googleapis.com/auth/devstorage.full_control'
-SCOPE_READ_WRITE = 'https://www.googleapis.com/auth/devstorage.read_write'
-SCOPE_READ_ONLY = 'https://www.googleapis.com/auth/devstorage.read_only'
-
-CONFIG_PRELUDE_CONTENT = """
-# This file contains credentials and other configuration information needed
-# by the boto library, used by gsutil. You can edit this file (e.g., to add
-# credentials) but be careful not to mis-edit any of the variable names (like
-# "gs_access_key_id") or remove important markers (like the "[Credentials]" and
-# "[Boto]" section delimiters).
-#
-"""
-
-# Default number of OS processes and Python threads for parallel operations.
-# On Linux systems we automatically scale the number of processes to match
-# the underlying CPU/core count. Given we'll be running multiple concurrent
-# processes on a typical multi-core Linux computer, to avoid being too
-# aggressive with resources, the default number of threads is reduced from
-# the previous value of 24 to 10.
-# On Windows and Mac systems parallel multi-processing and multi-threading
-# in Python presents various challenges so we retain compatibility with
-# the established parallel mode operation, i.e. one process and 24 threads.
-if platform.system() == 'Linux':
-  DEFAULT_PARALLEL_PROCESS_COUNT = multiprocessing.cpu_count()
-  DEFAULT_PARALLEL_THREAD_COUNT = 10
-else:
-  DEFAULT_PARALLEL_PROCESS_COUNT = 1
-  DEFAULT_PARALLEL_THREAD_COUNT = 24
-
-CONFIG_BOTO_SECTION_CONTENT = """
-[Boto]
-
-# To use a proxy, edit and uncomment the proxy and proxy_port lines. If you
-# need a user/password with this proxy, edit and uncomment those lines as well.
-#proxy = <proxy host>
-#proxy_port = <proxy port>
-#proxy_user = <your proxy user name>
-#proxy_pass = <your proxy password>
-
-# The following two options control the use of a secure transport for requests
-# to S3 and Google Cloud Storage. It is highly recommended to set both options
-# to True in production environments, especially when using OAuth2 bearer token
-# authentication with Google Cloud Storage.
-
-# Set 'is_secure' to False to cause boto to connect using HTTP instead of the
-# default HTTPS. This is useful if you want to capture/analyze traffic
-# (e.g., with tcpdump). This option should always be set to True in production
-# environments.
-#is_secure = False
-
-# Set 'https_validate_certificates' to False to disable server certificate
-# checking. The default for this option in the boto library is currently
-# 'False' (to avoid breaking apps that depend on invalid certificates); it is
-# therefore strongly recommended to always set this option explicitly to True
-# in configuration files, to protect against "man-in-the-middle" attacks.
-https_validate_certificates = True
-
-# Set 'send_crlf_after_proxy_auth_headers' to True if you encounter problems
-# tunneling HTTPS through a proxy. Users who don't have a proxy in the path
-# to Google Cloud Storage don't need to touch this. Users who use a proxy will
-# probably find that the default behavior (flag value False) works. If
-# you encounter an error like "EOF occurred in violation of protocol" while
-# trying to use gsutil through your proxy, try setting this flag to True. We
-# (gs-team@google.com) would be interested to hear from you if you need to set
-# this, including the make and version of the proxy server you are using.
-#send_crlf_after_proxy_auth_headers = False
-
-# 'debug' controls the level of debug messages printed: 0 for none, 1
-# for basic boto debug, 2 for all boto debug plus HTTP requests/responses.
-# Note: 'gsutil -d' sets debug to 2 for that one command run.
-#debug = <0, 1, or 2>
-
-# 'num_retries' controls the number of retry attempts made when errors occur.
-# The default is 6. Note: don't set this value to 0, as it will cause boto to
-# fail when reusing HTTP connections.
-#num_retries = <integer value>
-"""
-
-CONFIG_INPUTLESS_GSUTIL_SECTION_CONTENT = """
-[GSUtil]
-
-# 'resumable_threshold' specifies the smallest file size [bytes] for which
-# resumable Google Cloud Storage transfers are attempted. The default is 2097152
-# (2 MiB).
-#resumable_threshold = %(resumable_threshold)d
-
-# 'resumable_tracker_dir' specifies the base location where resumable
-# transfer tracker files are saved. By default they're in ~/.gsutil
-#resumable_tracker_dir = <file path>
-
-# 'parallel_process_count' and 'parallel_thread_count' specify the number
-# of OS processes and Python threads, respectively, to use when executing
-# operations in parallel. The default settings should work well as configured,
-# however, to enhance performance for transfers involving large numbers of
-# files, you may experiment with hand tuning these values to optimize
-# performance for your particular system configuration.
-# MacOS and Windows users should see
-# http://code.google.com/p/gsutil/issues/detail?id=78 before attempting
-# to experiment with these values.
-#parallel_process_count = %(parallel_process_count)d
-#parallel_thread_count = %(parallel_thread_count)d
-
-# 'use_magicfile' specifies if the 'file --mime-type <filename>' command should
-# be used to guess content types instead of the default filename extension-based
-# mechanism. Available on UNIX and MacOS (and possibly on Windows, if you're
-# running Cygwin or some other package that provides implementations of
-# UNIX-like commands). When available and enabled use_magicfile should be more
-# robust because it analyzes file contents in addition to extensions.
-#use_magicfile = False
-
-# 'content_language' specifies the ISO 639-1 language code of the content, to be
-# passed in the Content-Language header. By default no Content-Language is sent.
-# See the ISO 631-1 column of
-# http://www.loc.gov/standards/iso639-2/php/code_list.php for a list of
-# language codes.
-content_language = en
-""" % {'resumable_threshold': TWO_MB,
-       'parallel_process_count': DEFAULT_PARALLEL_PROCESS_COUNT,
-       'parallel_thread_count': DEFAULT_PARALLEL_THREAD_COUNT}
-
-CONFIG_OAUTH2_CONFIG_CONTENT = """
-[OAuth2]
-# This section specifies options used with OAuth2 authentication.
-
-# 'token_cache' specifies how the OAuth2 client should cache access tokens.
-# Valid values are:
-#  'in_memory': an in-memory cache is used. This is only useful if the boto
-#      client instance (and with it the OAuth2 plugin instance) persists
-#      across multiple requests.
-#  'file_system' : access tokens will be cached in the file system, in files
-#      whose names include a key derived from the refresh token the access token
-#      based on.
-# The default is 'file_system'.
-#token_cache = file_system
-#token_cache = in_memory
-
-# 'token_cache_path_pattern' specifies a path pattern for token cache files.
-# This option is only relevant if token_cache = file_system.
-# The value of this option should be a path, with place-holders '%(key)s' (which
-# will be replaced with a key derived from the refresh token the cached access
-# token was based on), and (optionally), %(uid)s (which will be replaced with
-# the UID of the current user, if available via os.getuid()).
-# Note that the config parser itself interpolates '%' placeholders, and hence
-# the above placeholders need to be escaped as '%%(key)s'.
-# The default value of this option is
-#  token_cache_path_pattern = <tmpdir>/oauth2client-tokencache.%%(uid)s.%%(key)s
-# where <tmpdir> is the system-dependent default temp directory.
-
-# The following options specify the OAuth2 client identity and secret that is
-# used when requesting and using OAuth2 tokens. If not specified, a default
-# OAuth2 client for the gsutil tool is used; for uses of the boto library (with
-# OAuth2 authentication plugin) in other client software, it is recommended to
-# use a tool/client-specific OAuth2 client. For more information on OAuth2, see
-# http://code.google.com/apis/accounts/docs/OAuth2.html
-#client_id = <OAuth2 client id>
-#client_secret = <OAuth2 client secret>
-
-# The following options specify the label and endpoint URIs for the OAUth2
-# authorization provider being used. Primarily useful for tool developers.
-#provider_label = Google
-#provider_authorization_uri = https://accounts.google.com/o/oauth2/auth
-#provider_token_uri = https://accounts.google.com/o/oauth2/token
-"""
-
-class ConfigCommand(Command):
-  """Implementation of gsutil config command."""
-
-  # Command specification (processed by parent class).
-  command_spec = {
-    # Name of command.
-    COMMAND_NAME : 'config',
-    # List of command name aliases.
-    COMMAND_NAME_ALIASES : ['cfg', 'conf', 'configure'],
-    # Min number of args required by this command.
-    MIN_ARGS : 0,
-    # Max number of args required by this command, or NO_MAX.
-    MAX_ARGS : 0,
-    # Getopt-style string specifying acceptable sub args.
-    SUPPORTED_SUB_ARGS : 'habfwrs:o:',
-    # True if file URIs acceptable for this command.
-    FILE_URIS_OK : False,
-    # True if provider-only URIs acceptable for this command.
-    PROVIDER_URIS_OK : False,
-    # Index in args of first URI arg.
-    URIS_START_ARG : 0,
-    # True if must configure gsutil before running command.
-    CONFIG_REQUIRED : False,
-  }
-  help_spec = {
-    # Name of command or auxiliary help info for which this help applies.
-    HELP_NAME : 'config',
-    # List of help name aliases.
-    HELP_NAME_ALIASES : ['cfg', 'conf', 'configure', 'proxy', 'aws', 's3'],
-    # Type of help:
-    HELP_TYPE : HelpType.COMMAND_HELP,
-    # One line summary of this help.
-    HELP_ONE_LINE_SUMMARY : 'Obtain credentials and create configuration file',
-    # The full help text.
-    HELP_TEXT : _detailed_help_text,
-  }
-
-  def _OpenConfigFile(self, file_path):
-    """Creates and opens a configuration file for writing.
-
-    The file is created with mode 0600, and attempts to open existing files will
-    fail (the latter is important to prevent symlink attacks).
-
-    It is the caller's responsibility to close the file.
-
-    Args:
-      file_path: Path of the file to be created.
-
-    Returns:
-      A writable file object for the opened file.
-
-    Raises:
-      CommandException: if an error occurred when opening the file (including
-          when the file already exists).
-    """
-    flags = os.O_RDWR | os.O_CREAT | os.O_EXCL
-    # Accommodate Windows; stolen from python2.6/tempfile.py.
-    if hasattr(os, 'O_NOINHERIT'):
-      flags |= os.O_NOINHERIT
-    try:
-      fd = os.open(file_path, flags, 0600)
-    except (OSError, IOError), e:
-      raise CommandException('Failed to open %s for writing: %s' %
-                             (file_path, e))
-    return os.fdopen(fd, 'w')
-
-  def _WriteBotoConfigFile(self, config_file, use_oauth2=True,
-      launch_browser=True, oauth2_scopes=[SCOPE_FULL_CONTROL]):
-    """Creates a boto config file interactively.
-
-    Needed credentials are obtained interactively, either by asking the user for
-    access key and secret, or by walking the user through the OAuth2 approval
-    flow.
-
-    Args:
-      config_file: File object to which the resulting config file will be
-          written.
-      use_oauth2: If True, walk user through OAuth2 approval flow and produce a
-          config with an oauth2_refresh_token credential. If false, ask the
-          user for access key and secret.
-      launch_browser: In the OAuth2 approval flow, attempt to open a browser
-          window and navigate to the approval URL.
-      oauth2_scopes: A list of OAuth2 scopes to request authorization for, when
-          using OAuth2.
-    """
-
-    # Collect credentials
-    provider_map = {'aws': 'aws', 'google': 'gs'}
-    uri_map = {'aws': 's3', 'google': 'gs'}
-    key_ids = {}
-    sec_keys = {}
-    if use_oauth2:
-      oauth2_refresh_token = oauth2_helper.OAuth2ApprovalFlow(
-          oauth2_helper.OAuth2ClientFromBotoConfig(boto.config),
-          oauth2_scopes, launch_browser)
-    else:
-      got_creds = False
-      for provider in provider_map:
-        if provider == 'google':
-          key_ids[provider] = raw_input('What is your %s access key ID? ' %
-                                        provider)
-          sec_keys[provider] = raw_input('What is your %s secret access key? ' %
-                                         provider)
-          got_creds = True
-          if not key_ids[provider] or not sec_keys[provider]:
-            raise CommandException(
-                'Incomplete credentials provided. Please try again.')
-      if not got_creds:
-        raise CommandException('No credentials provided. Please try again.')
-
-    # Write the config file prelude.
-    config_file.write(CONFIG_PRELUDE_CONTENT.lstrip())
-    config_file.write(
-        '# This file was created by gsutil version %s at %s.\n'
-        % (self.gsutil_ver,
-           datetime.datetime.now().strftime('%Y-%m-%d %H:%M:%S')))
-    config_file.write('#\n# You can create additional configuration files by '
-        'running\n# gsutil config [options] [-o <config-file>]\n\n\n')
-
-    # Write the config file Credentials section.
-    config_file.write('[Credentials]\n\n')
-    if use_oauth2:
-      config_file.write('# Google OAuth2 credentials (for "gs://" URIs):\n')
-      config_file.write('# The following OAuth2 token is authorized for '
-          'scope(s):\n')
-      for scope in oauth2_scopes:
-        config_file.write('#     %s\n' % scope)
-      config_file.write('gs_oauth2_refresh_token = %s\n\n' %
-          oauth2_refresh_token.refresh_token)
-    else:
-      config_file.write('# To add Google OAuth2 credentials ("gs://" URIs), '
-          'edit and uncomment the\n# following line:\n'
-          '#gs_oauth2_refresh_token = <your OAuth2 refresh token>\n\n')
-
-    for provider in provider_map:
-      key_prefix = provider_map[provider]
-      uri_scheme = uri_map[provider]
-      if provider in key_ids and provider in sec_keys:
-        config_file.write('# %s credentials ("%s://" URIs):\n' %
-                  (provider, uri_scheme))
-        config_file.write('%s_access_key_id = %s\n' %
-            (key_prefix, key_ids[provider]))
-        config_file.write('%s_secret_access_key = %s\n' %
-            (key_prefix, sec_keys[provider]))
-      else:
-        config_file.write('# To add %s credentials ("%s://" URIs), edit and '
-                  'uncomment the\n# following two lines:\n'
-                  '#%s_access_key_id = <your %s access key ID>\n'
-                  '#%s_secret_access_key = <your %s secret access key>\n' %
-                  (provider, uri_scheme, key_prefix, provider, key_prefix,
-                   provider))
-      host_key = Provider.HostKeyMap[provider]
-      config_file.write('# The ability to specify an alternate storage host '
-                'is primarily for cloud\n# storage service developers.\n'
-                '#%s_host = <alternate storage host address>\n\n' % host_key)
-
-    # Write the config file Boto section.
-    config_file.write('%s\n' % CONFIG_BOTO_SECTION_CONTENT)
-
-    # Write the config file GSUtil section that doesn't depend on user input.
-    config_file.write(CONFIG_INPUTLESS_GSUTIL_SECTION_CONTENT)
-
-    # Write the default API version.
-    config_file.write("""
-# 'default_api_version' specifies the default Google Cloud Storage API
-# version to use. If not set below gsutil defaults to API version 1.
-""")
-    api_version = 2
-    if not use_oauth2: api_version = 1
-
-    config_file.write('default_api_version = %d\n' % api_version)
-
-    default_project_id = '0'
-    project_id_section_prelude = """
-# 'default_project_id' specifies the default Google Cloud Storage project ID to
-# use with the 'mb' and 'ls' commands. If defined it overrides the default value
-# you set in the API Console. Either of these defaults can be overridden
-# by specifying the -p option to the 'mb' and 'ls' commands.
-"""
-    if default_project_id:
-      config_file.write('%sdefault_project_id = %s\n\n\n' %
-                        (project_id_section_prelude, default_project_id))
-    else:
-      sys.stderr.write('No default project ID entered. You will need to edit '
-                       'the default_project_id value\nin your boto config file '
-                       'before using "gsutil ls gs://" or "mb" commands'
-                       'with the\ndefault API version (2).\n')
-      config_file.write('%s#default_project_id = <value>\n\n\n' %
-                        project_id_section_prelude)
-
-    # Write the config file OAuth2 section.
-    config_file.write(CONFIG_OAUTH2_CONFIG_CONTENT)
-
-  # Command entry point.
-  def RunCommand(self):
-    scopes = []
-    use_oauth2 = True
-    launch_browser = False
-    output_file_name = None
-    for opt, opt_arg in self.sub_opts:
-      if opt == '-a':
-        use_oauth2 = False
-      elif opt == '-b':
-        launch_browser = True
-      elif opt == '-f':
-        scopes.append(SCOPE_FULL_CONTROL)
-      elif opt == '-o':
-        output_file_name = opt_arg
-      elif opt == '-r':
-        scopes.append(SCOPE_READ_ONLY)
-      elif opt == '-s':
-        scopes.append(opt_arg)
-      elif opt == '-w':
-        scopes.append(SCOPE_READ_WRITE)
-
-    if use_oauth2 and not HAVE_OAUTH2:
-      raise CommandException(
-          'OAuth2 is only supported when running under Python 2.6 or later\n'
-          '(unless additional dependencies are installed, '
-          'see README for details);\n'
-          'you are running Python %s.\nUse "gsutil config -a" to create a '
-          'config with Developer Key authentication credentials.' % sys.version)
-
-    if not scopes:
-      scopes.append(SCOPE_FULL_CONTROL)
-
-    default_config_path_bak = None
-    if output_file_name is None:
-      # Check to see if a default config file name is requested via
-      # environment variable. If so, use it, otherwise use the hard-coded
-      # default file. Then use the default config file name, if it doesn't 
-      # exist or can be moved out of the way without clobbering an existing 
-      # backup file.
-      boto_config_from_env = os.environ.get('BOTO_CONFIG', None)
-      if boto_config_from_env:
-        default_config_path = boto_config_from_env
-      else:
-        default_config_path = os.path.expanduser(os.path.join('~', '.boto'))
-      if not os.path.exists(default_config_path):
-        output_file_name = default_config_path
-      else:
-        default_config_path_bak = default_config_path + '.bak'
-        if os.path.exists(default_config_path_bak):
-          raise CommandException('Cannot back up existing config '
-              'file "%s": backup file exists ("%s").'
-              % (default_config_path, default_config_path_bak))
-        else:
-          try:
-            sys.stderr.write(
-                'Backing up existing config file "%s" to "%s"...\n'
-                % (default_config_path, default_config_path_bak))
-            os.rename(default_config_path, default_config_path_bak)
-          except e:
-            raise CommandException('Failed to back up existing config '
-                'file ("%s" -> "%s"): %s.'
-                % (default_config_path, default_config_path_bak, e))
-          output_file_name = default_config_path
-
-    if output_file_name == '-':
-      output_file = sys.stdout
-    else:
-      output_file = self._OpenConfigFile(output_file_name)
-
-    # Catch ^C so we can restore the backup.
-    signal.signal(signal.SIGINT, cleanup_handler)
-    try:
-      self._WriteBotoConfigFile(output_file, use_oauth2=use_oauth2,
-          launch_browser=launch_browser, oauth2_scopes=scopes)
-    except Exception, e:
-      user_aborted = isinstance(e, AbortException)
-      if user_aborted:
-        sys.stderr.write('\nCaught ^C; cleaning up\n')
-      # If an error occurred during config file creation, remove the invalid
-      # config file and restore the backup file.
-      if output_file_name != '-':
-        output_file.close()
-        os.unlink(output_file_name)
-        if default_config_path_bak:
-          sys.stderr.write('Restoring previous backed up file (%s)\n' %
-                           default_config_path_bak)
-          os.rename(default_config_path_bak, output_file_name)
-      raise
-
-    if output_file_name != '-':
-      output_file.close()
-      sys.stderr.write(
-          '\nBoto config file "%s" created.\n' % output_file_name)
-
-    return 0
-
-def cleanup_handler(signalnum, handler):
-  raise AbortException('User interrupted config command')