libarchive 0.1.1 → 0.1.2

data/ext/archive_write_open_rb_str.h

@@ -1,6 +1,6 @@
-#ifndef _ARCHIVE_WRITE_OPEN_RB_STR_H_
-#define _ARCHIVE_WRITE_OPEN_RB_STR_H_
-
-int archive_write_open_rb_str(struct archive *a, VALUE str);
-
-#endif
+#ifndef _ARCHIVE_WRITE_OPEN_RB_STR_H_
+#define _ARCHIVE_WRITE_OPEN_RB_STR_H_
+
+int archive_write_open_rb_str(struct archive *a, VALUE str);
+
+#endif

data/ext/archive_write_set_compression.c

@@ -1,32 +1,32 @@
-#include <errno.h>
-#include <archive.h>
-
-static struct {
-  int code;
-  int (*setter)(struct archive *);
-} codes[] = {
-  { ARCHIVE_COMPRESSION_NONE,     archive_write_set_compression_none     },
-  { ARCHIVE_COMPRESSION_GZIP,     archive_write_set_compression_gzip     },
-  { ARCHIVE_COMPRESSION_BZIP2,    archive_write_set_compression_bzip2    },
-#if ARCHIVE_VERSION_NUMBER >= 2005000
-  { ARCHIVE_COMPRESSION_COMPRESS, archive_write_set_compression_compress },
-#endif
-  // XXX:
-  /*
-  { ARCHIVE_COMPRESSION_PROGRAM,  archive_read_support_compression_program  },
-  */
-  { -1,                           NULL                                      },
-};
-
-int archive_write_set_compression(struct archive *a, int code) {
-  int i;
-
-  for (i = 0; codes[i].code >= 0; i++) {
-    if (codes[i].code == code) {
-      return codes[i].setter(a);
-    }
-  }
-
-  archive_set_error(a, EINVAL, "No such compression");
-  return ARCHIVE_FATAL;
-}
+#include <errno.h>
+#include <archive.h>
+
+static struct {
+  int code;
+  int (*setter)(struct archive *);
+} codes[] = {
+  { ARCHIVE_COMPRESSION_NONE,     archive_write_set_compression_none     },
+  { ARCHIVE_COMPRESSION_GZIP,     archive_write_set_compression_gzip     },
+  { ARCHIVE_COMPRESSION_BZIP2,    archive_write_set_compression_bzip2    },
+#if ARCHIVE_VERSION_NUMBER >= 2005000
+  { ARCHIVE_COMPRESSION_COMPRESS, archive_write_set_compression_compress },
+#endif
+  // XXX:
+  /*
+  { ARCHIVE_COMPRESSION_PROGRAM,  archive_read_support_compression_program  },
+  */
+  { -1,                           NULL                                      },
+};
+
+int archive_write_set_compression(struct archive *a, int code) {
+  int i;
+
+  for (i = 0; codes[i].code >= 0; i++) {
+    if (codes[i].code == code) {
+      return codes[i].setter(a);
+    }
+  }
+
+  archive_set_error(a, EINVAL, "No such compression");
+  return ARCHIVE_FATAL;
+}

data/ext/archive_write_set_compression.h

@@ -1,6 +1,6 @@
-#ifndef _ARCHIVE_WRITE_SET_COMPRESSION_H_
-#define _ARCHIVE_WRITE_SET_COMPRESSION_H_
-
-int archive_write_set_compression(struct archive *a, int code);
-
-#endif
+#ifndef _ARCHIVE_WRITE_SET_COMPRESSION_H_
+#define _ARCHIVE_WRITE_SET_COMPRESSION_H_
+
+int archive_write_set_compression(struct archive *a, int code);
+
+#endif

data/ext/config.h.in

@@ -1,22 +1,22 @@
-/* config.h.in.  Generated from configure.in by autoheader.  */
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Number of bits in a file offset, on hosts where this is settable. */
-#undef _FILE_OFFSET_BITS
-
-/* Define for large files, on AIX-style hosts. */
-#undef _LARGE_FILES
+/* config.h.in.  Generated from configure.in by autoheader.  */
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+#undef _FILE_OFFSET_BITS
+
+/* Define for large files, on AIX-style hosts. */
+#undef _LARGE_FILES

data/ext/configure.in

@@ -1,11 +1,11 @@
-#                                               -*- Autoconf -*-
-# Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.61)
-AC_INIT
-AC_CONFIG_SRCDIR([archive_read_support_compression.c])
-AC_CONFIG_HEADER([config.h])
-AC_PROG_CC
-AC_PROG_INSTALL
-AC_SYS_LARGEFILE
-AC_OUTPUT
+#                                               -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.61)
+AC_INIT
+AC_CONFIG_SRCDIR([archive_read_support_compression.c])
+AC_CONFIG_HEADER([config.h])
+AC_PROG_CC
+AC_PROG_INSTALL
+AC_SYS_LARGEFILE
+AC_OUTPUT

data/ext/depend

@@ -1,19 +1,19 @@
-archive_read_support_compression.o: archive_read_support_compression.c
-archive_read_support_format.o: archive_read_support_format.c
-archive_write_open_rb_str.o: archive_write_open_rb_str.c
-archive_write_set_compression.o: archive_write_set_compression.c
-libarchive.o: libarchive.c libarchive_internal.h \
-  archive_write_open_rb_str.h archive_read_support_compression.h \
-  archive_read_support_format.h archive_write_set_compression.h
-libarchive_archive.o: libarchive_archive.c libarchive_internal.h \
-  archive_write_open_rb_str.h archive_read_support_compression.h \
-  archive_read_support_format.h archive_write_set_compression.h
-libarchive_entry.o: libarchive_entry.c libarchive_internal.h \
-  archive_write_open_rb_str.h archive_read_support_compression.h \
-  archive_read_support_format.h archive_write_set_compression.h
-libarchive_reader.o: libarchive_reader.c libarchive_internal.h \
-  archive_write_open_rb_str.h archive_read_support_compression.h \
-  archive_read_support_format.h archive_write_set_compression.h
-libarchive_writer.o: libarchive_writer.c libarchive_internal.h \
-  archive_write_open_rb_str.h archive_read_support_compression.h \
-  archive_read_support_format.h archive_write_set_compression.h
+archive_read_support_compression.o: archive_read_support_compression.c
+archive_read_support_format.o: archive_read_support_format.c
+archive_write_open_rb_str.o: archive_write_open_rb_str.c
+archive_write_set_compression.o: archive_write_set_compression.c
+libarchive.o: libarchive.c libarchive_internal.h \
+  archive_write_open_rb_str.h archive_read_support_compression.h \
+  archive_read_support_format.h archive_write_set_compression.h
+libarchive_archive.o: libarchive_archive.c libarchive_internal.h \
+  archive_write_open_rb_str.h archive_read_support_compression.h \
+  archive_read_support_format.h archive_write_set_compression.h
+libarchive_entry.o: libarchive_entry.c libarchive_internal.h \
+  archive_write_open_rb_str.h archive_read_support_compression.h \
+  archive_read_support_format.h archive_write_set_compression.h
+libarchive_reader.o: libarchive_reader.c libarchive_internal.h \
+  archive_write_open_rb_str.h archive_read_support_compression.h \
+  archive_read_support_format.h archive_write_set_compression.h
+libarchive_writer.o: libarchive_writer.c libarchive_internal.h \
+  archive_write_open_rb_str.h archive_read_support_compression.h \
+  archive_read_support_format.h archive_write_set_compression.h

data/ext/extconf.rb

@@ -1,6 +1,10 @@
-require 'mkmf'
-
-if system('/bin/sh configure') and have_header('config.h') and have_header('archive.h') and have_header('archive_entry.h')
-  $libs << " -larchive"
-  create_makefile('libarchive_ruby')
-end
+require 'mkmf'
+
+if system('/bin/sh configure') and have_header('config.h') and have_header('archive.h') and have_header('archive_entry.h')
+  $libs << " -larchive"
+
+  have_header('zlib.h')
+  have_header('bzlib.h')
+
+  create_makefile('rblibarchive')
+end

data/ext/install-sh

@@ -1,250 +1,250 @@
-#! /bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	true
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-	else
-		instcmd=mkdir
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f $src -o -d $src ]
-	then
-		true
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
-	
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		true
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		true
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='	
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		true
-	fi
-
-	pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		dstfile=`basename $dst $transformbasename | 
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		true
-	fi
-
-# Make a temp file name in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd $src $dsttmp &&
-
-	trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
-
-fi &&
-
-
-exit 0
+#! /bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:	no input file specified"
+	exit 1
+else
+	true
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+	
+	if [ -d $dst ]; then
+		instcmd=:
+	else
+		instcmd=mkdir
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f $src -o -d $src ]
+	then
+		true
+	else
+		echo "install:  $src does not exist"
+		exit 1
+	fi
+	
+	if [ x"$dst" = x ]
+	then
+		echo "install:	no destination specified"
+		exit 1
+	else
+		true
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	else
+		true
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='	
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$mkdirprog "${pathcomp}"
+	else
+		true
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd $dst &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		dstfile=`basename $dst $transformbasename | 
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		true
+	fi
+
+# Make a temp file name in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp &&
+
+	trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+	$doit $rmcmd -f $dstdir/$dstfile &&
+	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0