libarchive 0.1.1 → 0.1.2

data/COPYING.libarchive

@@ -1,60 +1,60 @@
-The libarchive distribution as a whole is Copyright by Tim Kientzle
-and is subject to the copyright notice reproduced at the bottom of
-this file.
-
-Each individual file in this distribution should have a clear
-copyright/licensing statement at the beginning of the file.  If any do
-not, please let me know and I will rectify it.  The following is
-intended to summarize the copyright status of the individual files;
-the actual statements in the files are controlling.
-
-* Except as listed below, all C sources (including .c and .h files)
-  and documentation files are subject to the copyright notice reproduced
-  at the bottom of this file.
-
-* The following source files are also subject in whole or in part to
-  a 3-clause UC Regents copyright; please read the individual source
-  files for details:
-   libarchive/archive_entry.c
-   libarchive/archive_read_support_compression_compress.c
-   libarchive/archive_write_set_compression_compress.c
-   libarchive/mtree.5
-   tar/matching.c
-
-* The following source files are in the public domain:
-   tar/getdate.y
-
-* The build files---including Makefiles, configure scripts,
-  and auxiliary scripts used as part of the compile process---have
-  widely varying licensing terms.  Please check individual files before
-  distributing them to see if those restrictions apply to you.
-
-I intend for all new source code to use the license below and hope over
-time to replace code with other licenses with new implementations that
-do use the license below.  The varying licensing of the build scripts
-seems to be an unavoidable mess.
-
-
-Copyright (c) 2003-2008 <author(s)>
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer
-   in this position and unchanged.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR
-IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT,
-INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+The libarchive distribution as a whole is Copyright by Tim Kientzle
+and is subject to the copyright notice reproduced at the bottom of
+this file.
+
+Each individual file in this distribution should have a clear
+copyright/licensing statement at the beginning of the file.  If any do
+not, please let me know and I will rectify it.  The following is
+intended to summarize the copyright status of the individual files;
+the actual statements in the files are controlling.
+
+* Except as listed below, all C sources (including .c and .h files)
+  and documentation files are subject to the copyright notice reproduced
+  at the bottom of this file.
+
+* The following source files are also subject in whole or in part to
+  a 3-clause UC Regents copyright; please read the individual source
+  files for details:
+   libarchive/archive_entry.c
+   libarchive/archive_read_support_compression_compress.c
+   libarchive/archive_write_set_compression_compress.c
+   libarchive/mtree.5
+   tar/matching.c
+
+* The following source files are in the public domain:
+   tar/getdate.y
+
+* The build files---including Makefiles, configure scripts,
+  and auxiliary scripts used as part of the compile process---have
+  widely varying licensing terms.  Please check individual files before
+  distributing them to see if those restrictions apply to you.
+
+I intend for all new source code to use the license below and hope over
+time to replace code with other licenses with new implementations that
+do use the license below.  The varying licensing of the build scripts
+seems to be an unavoidable mess.
+
+
+Copyright (c) 2003-2008 <author(s)>
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+1. Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer
+   in this position and unchanged.
+2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR
+IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

data/LICENSE.libbzip2

@@ -1,42 +1,42 @@
-
- --------------------------------------------------------------------------
-
-This program, "bzip2", the associated library "libbzip2", and all
-documentation, are copyright (C) 1996-2007 Julian R Seward.  All
-rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-
-2. The origin of this software must not be misrepresented; you must 
-   not claim that you wrote the original software.  If you use this 
-   software in a product, an acknowledgment in the product 
-   documentation would be appreciated but is not required.
-
-3. Altered source versions must be plainly marked as such, and must
-   not be misrepresented as being the original software.
-
-4. The name of the author may not be used to endorse or promote 
-   products derived from this software without specific prior written 
-   permission.
-
-THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-Julian Seward, jseward@bzip.org
-bzip2/libbzip2 version 1.0.5 of 10 December 2007
-
- --------------------------------------------------------------------------
+
+ --------------------------------------------------------------------------
+
+This program, "bzip2", the associated library "libbzip2", and all
+documentation, are copyright (C) 1996-2007 Julian R Seward.  All
+rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+
+1. Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+2. The origin of this software must not be misrepresented; you must 
+   not claim that you wrote the original software.  If you use this 
+   software in a product, an acknowledgment in the product 
+   documentation would be appreciated but is not required.
+
+3. Altered source versions must be plainly marked as such, and must
+   not be misrepresented as being the original software.
+
+4. The name of the author may not be used to endorse or promote 
+   products derived from this software without specific prior written 
+   permission.
+
+THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
+OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Julian Seward, jseward@bzip.org
+bzip2/libbzip2 version 1.0.5 of 10 December 2007
+
+ --------------------------------------------------------------------------

data/README.txt

@@ -47,7 +47,7 @@ http://rubyforge.org/projects/libarchive
 
 == Source Code
 
-http://coderepos.org/share/browser/lang/ruby/libarchive/trunk/
+https://github.com/winebarrel/Libarchive-Ruby
 
 == Dependency
 
@@ -61,7 +61,7 @@ gem install libarchive
 
 == Example
 === reading archive
-    require 'libarchive_ruby'
+    require 'libarchive'
     
     Archive.read_open_filename('foo.tar.gz') do |ar|
       while entry = ar.next_header
@@ -78,9 +78,9 @@ gem install libarchive
     end
 
 === creating archive
-    require 'libarchive_ruby'
+    require 'libarchive'
     
-    Archive.write_open_filename('foo.tar.bz2', Archive::COMPRESSION_BZIP2, Archive::FORMAT_TAR_USTAR) do |ar|
+    Archive.write_open_filename('foo.tar.bz2', Archive::COMPRESSION_BZIP2, Archive::FORMAT_TAR) do |ar|
       Dir.glob('*.c').each do |fn|
         ar.new_entry do |entry|
           entry.copy_stat(fn)
@@ -98,7 +98,7 @@ gem install libarchive
     end
 
 === creating archive by extarnal program
-    require 'libarchive_ruby'
+    require 'libarchive'
     
     Archive.write_open_filename('foo.tar.lzo', 'lzop', Archive::FORMAT_TAR_USTAR) do |ar|
       ...
@@ -135,7 +135,7 @@ gem install libarchive
 Libarchive/Ruby(mswin32) contains Libarchive(2.6.0) and libbzip2(1.0.5).
 
 * Libarchive
-  * http://people.freebsd.org/~kientzle/libarchive/
+  * http://code.google.com/p/libarchive/
   * see {COPYING.libarchive}[link:files/COPYING_libarchive.html]
 
 * libbzip2

data/ext/archive_read_support_compression.c

@@ -1,31 +1,31 @@
-#include <errno.h>
-#include <archive.h>
-
-static struct {
-  int code;
-  int (*setter)(struct archive *);
-} codes[] = {
-  { ARCHIVE_COMPRESSION_NONE,     archive_read_support_compression_none     },
-  { ARCHIVE_COMPRESSION_GZIP,     archive_read_support_compression_gzip     },
-  { ARCHIVE_COMPRESSION_BZIP2,    archive_read_support_compression_bzip2    },
-  { ARCHIVE_COMPRESSION_COMPRESS, archive_read_support_compression_compress },
-  // XXX:
-  /*
-  { ARCHIVE_COMPRESSION_PROGRAM,  archive_read_support_compression_program  },
-  { ARCHIVE_COMPRESSION_LZMA,     archive_read_support_compression_lzma     },
-  */
-  { -1,                           NULL                                      },
-};
-
-int archive_read_support_compression(struct archive *a, int code) {
-  int i;
-
-  for (i = 0; codes[i].code >= 0; i++) {
-    if (codes[i].code == code) {
-      return codes[i].setter(a);
-    }
-  }
-
-  archive_set_error(a, EINVAL, "No such compression");
-  return ARCHIVE_FATAL;
-}
+#include <errno.h>
+#include <archive.h>
+
+static struct {
+  int code;
+  int (*setter)(struct archive *);
+} codes[] = {
+  { ARCHIVE_COMPRESSION_NONE,     archive_read_support_compression_none     },
+  { ARCHIVE_COMPRESSION_GZIP,     archive_read_support_compression_gzip     },
+  { ARCHIVE_COMPRESSION_BZIP2,    archive_read_support_compression_bzip2    },
+  { ARCHIVE_COMPRESSION_COMPRESS, archive_read_support_compression_compress },
+  // XXX:
+  /*
+  { ARCHIVE_COMPRESSION_PROGRAM,  archive_read_support_compression_program  },
+  { ARCHIVE_COMPRESSION_LZMA,     archive_read_support_compression_lzma     },
+  */
+  { -1,                           NULL                                      },
+};
+
+int archive_read_support_compression(struct archive *a, int code) {
+  int i;
+
+  for (i = 0; codes[i].code >= 0; i++) {
+    if (codes[i].code == code) {
+      return codes[i].setter(a);
+    }
+  }
+
+  archive_set_error(a, EINVAL, "No such compression");
+  return ARCHIVE_FATAL;
+}

data/ext/archive_read_support_compression.h

@@ -1,6 +1,6 @@
-#ifndef _ARCHIVE_READ_SUPPORT_COMPRESSION_H_
-#define _ARCHIVE_READ_SUPPORT_COMPRESSION_H_
-
-int archive_read_support_compression(struct archive *a, int code);
-
-#endif
+#ifndef _ARCHIVE_READ_SUPPORT_COMPRESSION_H_
+#define _ARCHIVE_READ_SUPPORT_COMPRESSION_H_
+
+int archive_read_support_compression(struct archive *a, int code);
+
+#endif

data/ext/archive_read_support_format.c

@@ -1,32 +1,32 @@
-#include <errno.h>
-#include <archive.h>
-
-static struct {
-  int code;
-  int (*setter)(struct archive *);
-} codes[] = {
-  { ARCHIVE_FORMAT_CPIO,       archive_read_support_format_cpio    },
-  { ARCHIVE_FORMAT_TAR,        archive_read_support_format_tar     },
-  { ARCHIVE_FORMAT_TAR_GNUTAR, archive_read_support_format_gnutar  },
-  { ARCHIVE_FORMAT_ISO9660,    archive_read_support_format_iso9660 },
-  { ARCHIVE_FORMAT_ZIP,        archive_read_support_format_zip     },
-  { ARCHIVE_FORMAT_EMPTY,      archive_read_support_format_empty   },
-  { ARCHIVE_FORMAT_AR,         archive_read_support_format_ar      },
-#ifdef ARCHIVE_FORMAT_MTREE
-  { ARCHIVE_FORMAT_MTREE,      archive_read_support_format_mtree   },
-#endif
-  { -1,                        NULL                                },
-};
-
-int archive_read_support_format(struct archive *a, int code) {
-  int i;
-
-  for (i = 0; codes[i].code >= 0; i++) {
-    if (codes[i].code == code) {
-      return codes[i].setter(a);
-    }
-  }
-
-  archive_set_error(a, EINVAL, "No such format");
-  return ARCHIVE_FATAL;
-}
+#include <errno.h>
+#include <archive.h>
+
+static struct {
+  int code;
+  int (*setter)(struct archive *);
+} codes[] = {
+  { ARCHIVE_FORMAT_CPIO,       archive_read_support_format_cpio    },
+  { ARCHIVE_FORMAT_TAR,        archive_read_support_format_tar     },
+  { ARCHIVE_FORMAT_TAR_GNUTAR, archive_read_support_format_gnutar  },
+  { ARCHIVE_FORMAT_ISO9660,    archive_read_support_format_iso9660 },
+  { ARCHIVE_FORMAT_ZIP,        archive_read_support_format_zip     },
+  { ARCHIVE_FORMAT_EMPTY,      archive_read_support_format_empty   },
+  { ARCHIVE_FORMAT_AR,         archive_read_support_format_ar      },
+#ifdef ARCHIVE_FORMAT_MTREE
+  { ARCHIVE_FORMAT_MTREE,      archive_read_support_format_mtree   },
+#endif
+  { -1,                        NULL                                },
+};
+
+int archive_read_support_format(struct archive *a, int code) {
+  int i;
+
+  for (i = 0; codes[i].code >= 0; i++) {
+    if (codes[i].code == code) {
+      return codes[i].setter(a);
+    }
+  }
+
+  archive_set_error(a, EINVAL, "No such format");
+  return ARCHIVE_FATAL;
+}

data/ext/archive_read_support_format.h

@@ -1,6 +1,6 @@
-#ifndef _ARCHIVE_READ_SUPPORT_FORMAT_H_
-#define _ARCHIVE_READ_SUPPORT_FORMAT_H_
-
-int archive_read_support_format(struct archive *a, int code);
-
-#endif
+#ifndef _ARCHIVE_READ_SUPPORT_FORMAT_H_
+#define _ARCHIVE_READ_SUPPORT_FORMAT_H_
+
+int archive_read_support_format(struct archive *a, int code);
+
+#endif

data/ext/archive_write_open_rb_str.c

@@ -1,29 +1,29 @@
-#include <archive.h>
-#include <ruby.h>
-
-#ifdef _WIN32
-typedef long ssize_t;
-#endif
-
-static int rb_str_write_open(struct archive *a, void *client_data) {
-  if (archive_write_get_bytes_in_last_block(a) == -1) { 
-    archive_write_set_bytes_in_last_block(a, 1);
-  }
-
-  return ARCHIVE_OK;
-}
-
-static int rb_str_write_close(struct archive *a, void *client_data) {
-  return ARCHIVE_OK;
-}
-
-
-static ssize_t rb_str_write(struct archive *a, void *client_data, const void *buff, size_t length) {
-  VALUE str = (VALUE) client_data;
-  rb_str_cat(str, buff, length);
-  return length;
-}
-
-int archive_write_open_rb_str(struct archive *a, VALUE str) {
-  return archive_write_open(a, (void *) str, rb_str_write_open, rb_str_write, rb_str_write_close);
-}
+#include <archive.h>
+#include <ruby.h>
+
+#ifdef _WIN32
+typedef long ssize_t;
+#endif
+
+static int rb_str_write_open(struct archive *a, void *client_data) {
+  if (archive_write_get_bytes_in_last_block(a) == -1) { 
+    archive_write_set_bytes_in_last_block(a, 1);
+  }
+
+  return ARCHIVE_OK;
+}
+
+static int rb_str_write_close(struct archive *a, void *client_data) {
+  return ARCHIVE_OK;
+}
+
+
+static ssize_t rb_str_write(struct archive *a, void *client_data, const void *buff, size_t length) {
+  VALUE str = (VALUE) client_data;
+  rb_str_cat(str, buff, length);
+  return length;
+}
+
+int archive_write_open_rb_str(struct archive *a, VALUE str) {
+  return archive_write_open(a, (void *) str, rb_str_write_open, rb_str_write, rb_str_write_close);
+}