laag-nasm 2.13.03.2

data/vendor/repo.or.cz/nasm/nasmlib/ver.c

@@ -0,0 +1,51 @@
+/* ----------------------------------------------------------------------- *
+ *   
+ *   Copyright 1996-2016 The NASM Authors - All Rights Reserved
+ *   See the file AUTHORS included with the NASM distribution for
+ *   the specific copyright holders.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following
+ *   conditions are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above
+ *     copyright notice, this list of conditions and the following
+ *     disclaimer in the documentation and/or other materials provided
+ *     with the distribution.
+ *     
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ----------------------------------------------------------------------- */
+
+#include "ver.h"
+#include "version.h"
+
+/* This is printed when entering nasm -v */
+const char nasm_version[] = NASM_VER;
+const char nasm_date[] = __DATE__;
+const char nasm_compile_options[] = ""
+#ifdef DEBUG
+    " with -DDEBUG"
+#endif
+    ;
+
+/* These are used by some backends. */
+const char nasm_comment[] =
+    "The Netwide Assembler " NASM_VER;
+
+const char nasm_signature[] =
+    "NASM " NASM_VER;

data/vendor/repo.or.cz/nasm/nasmlib/zerobuf.c

@@ -0,0 +1,42 @@
+/* ----------------------------------------------------------------------- *
+ *   
+ *   Copyright 1996-2016 The NASM Authors - All Rights Reserved
+ *   See the file AUTHORS included with the NASM distribution for
+ *   the specific copyright holders.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following
+ *   conditions are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above
+ *     copyright notice, this list of conditions and the following
+ *     disclaimer in the documentation and/or other materials provided
+ *     with the distribution.
+ *     
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * nasmlib.c	library routines for the Netwide Assembler
+ */
+
+#include "compiler.h"
+#include "nasmlib.h"
+
+/* Uninitialized -> all zero by C spec */
+const uint8_t zero_buffer[ZERO_BUF_SIZE];

data/vendor/repo.or.cz/nasm/ndisasm.txt

@@ -0,0 +1,94 @@
+ndisasm(1)
+==========
+:doctype:	manpage
+:man source:	NASM
+:man manual:	The Netwide Assembler Project
+
+NAME
+----
+ndisasm - the Netwide Disassembler, an 80x86 binary file disassembler
+
+SYNOPSIS
+--------
+*ndisasm* [ *-o* origin ] [ *-s* sync-point [...]] [ *-a* | *-i* ]
+	[ *-b* bits ] [ *-u* ] [ *-e* hdrlen ] [ *-p* vendor ]
+	[ *-k* offset,length [...]] infile
+
+DESCRIPTION
+-----------
+The *ndisasm* command generates a disassembly listing of the binary file
+infile and directs it to stdout.
+
+OPTIONS
+-------
+*-h*::
+	Causes *ndisasm* to exit immediately, after giving a summary
+	of its invocation options.
+
+*-r*|*-v*::
+	Causes *ndisasm* to exit immediately, after displaying its
+	version number.
+
+*-o* 'origin'::
+	Specifies the notional load address for the file. This
+	option causes *ndisasm* to get the addresses it lists
+	down the left hand margin, and the target addresses
+	of PC-relative jumps and calls, right.
+
+*-s* 'sync-point'::
+	Manually specifies a synchronisation address, such that
+	*ndisasm* will not output any machine instruction which
+	encompasses bytes on both sides of the address. Hence
+	the instruction which starts at that address will be
+	correctly disassembled.
+
+*-e* 'hdrlen'::
+	Specifies a number of bytes to discard from the beginning
+	of the file before starting disassembly. This does not
+	count towards the calculation of the disassembly offset:
+	the first 'disassembled' instruction will be shown starting
+	at the given load address.
+
+*-k* 'offset,length'::
+	Specifies that 'length' bytes, starting from disassembly
+	offset 'offset', should be skipped over without generating
+	any output. The skipped bytes still count towards the
+	calculation of the disassembly offset.
+
+*-a*|*-i*::
+	Enables automatic (or intelligent) sync mode, in which
+	*ndisasm* will attempt to guess where synchronisation should
+	be performed, by means of examining the target addresses
+	of the relative jumps and calls it disassembles.
+
+*-b* 'bits'::
+	Specifies 16-, 32- or 64-bit mode. The default is 16-bit
+	mode.
+
+*-u*::
+	Specifies 32-bit mode, more compactly than using `-b 32'.
+
+*-p* 'vendor'::
+	Prefers instructions as defined by 'vendor' in case of
+	a conflict. Known 'vendor' names include *intel*, *amd*,
+	*cyrix*, and *idt*. The default is *intel*.
+
+RESTRICTIONS
+------------
+*ndisasm* only disassembles binary files: it has no understanding of
+the header information present in object or executable files.
+If you want to disassemble an object file, you should probably
+be using *objdump*(1).
+
+Auto-sync mode won't necessarily cure all your synchronisation
+problems: a sync marker can only be placed automatically if a
+jump or call instruction is found to refer to it 'before'
+*ndisasm* actually disassembles that part of the code. Also,
+if spurious jumps or calls result from disassembling
+non-machine-code data, sync markers may get placed in strange
+places. Feel free to turn auto-sync off and go back to doing
+it manually if necessary.
+
+SEE ALSO
+--------
+*objdump*(1)

data/vendor/repo.or.cz/nasm/nsis/NASMMultiUser.nsh

@@ -0,0 +1,478 @@
+/*
+
+MultiUser.nsh
+
+Installer configuration for multi-user Windows environments
+
+Copyright 2008-2009 Joost Verburg
+Updated 2016 by H. Peter Anvin to handle 64-bit Windows
+
+*/
+
+!ifndef MULTIUSER_INCLUDED
+!define MULTIUSER_INCLUDED
+!verbose push
+!verbose 3
+
+;Standard NSIS header files
+
+!ifdef MULTIUSER_MUI
+  !include MUI2.nsh
+!endif
+!include nsDialogs.nsh
+!include LogicLib.nsh
+!include WinVer.nsh
+!include FileFunc.nsh
+
+;Variables
+
+Var MultiUser.Privileges
+Var MultiUser.InstallMode
+
+;Command line installation mode setting
+
+!ifdef MULTIUSER_INSTALLMODE_COMMANDLINE
+  !include StrFunc.nsh
+  !ifndef StrStr_INCLUDED
+    ${StrStr}
+  !endif
+  !ifndef MULTIUSER_NOUNINSTALL
+    !ifndef UnStrStr_INCLUDED
+      ${UnStrStr}
+    !endif
+  !endif
+
+  Var MultiUser.Parameters
+  Var MultiUser.Result
+!endif
+
+;Installation folder stored in registry
+
+!ifdef MULTIUSER_INSTALLMODE_INSTDIR_REGISTRY_KEY & MULTIUSER_INSTALLMODE_INSTDIR_REGISTRY_VALUENAME
+  Var MultiUser.InstDir
+!endif
+
+!ifdef MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_KEY & MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_VALUENAME
+  Var MultiUser.DefaultKeyValue
+!endif
+
+;Windows Vista UAC setting
+
+!if "${MULTIUSER_EXECUTIONLEVEL}" == Admin
+  RequestExecutionLevel admin
+  !define MULTIUSER_EXECUTIONLEVEL_ALLUSERS
+!else if "${MULTIUSER_EXECUTIONLEVEL}" == Power
+  RequestExecutionLevel admin
+  !define MULTIUSER_EXECUTIONLEVEL_ALLUSERS
+!else if "${MULTIUSER_EXECUTIONLEVEL}" == Highest
+  RequestExecutionLevel highest
+  !define MULTIUSER_EXECUTIONLEVEL_ALLUSERS
+!else
+  RequestExecutionLevel user
+!endif
+
+/*
+
+Install modes
+
+*/
+
+!macro MULTIUSER_INSTALLMODE_ALLUSERS UNINSTALLER_PREFIX UNINSTALLER_FUNCPREFIX
+
+  ;Install mode initialization - per-machine
+
+  ${ifnot} ${IsNT}
+    ${orif} $MultiUser.Privileges == "Admin"
+    ${orif} $MultiUser.Privileges == "Power"
+
+    StrCpy $MultiUser.InstallMode AllUsers
+
+    SetShellVarContext all
+
+    !if "${UNINSTALLER_PREFIX}" != UN
+      ;Set default installation location for installer
+      !ifdef MULTIUSER_INSTALLMODE_INSTDIR
+        StrCpy $INSTDIR "${GLOBALINSTDIR}\${MULTIUSER_INSTALLMODE_INSTDIR}"
+      !endif
+    !endif
+
+    !ifdef MULTIUSER_INSTALLMODE_INSTDIR_REGISTRY_KEY & MULTIUSER_INSTALLMODE_INSTDIR_REGISTRY_VALUENAME
+
+      ReadRegStr $MultiUser.InstDir HKLM "${MULTIUSER_INSTALLMODE_INSTDIR_REGISTRY_KEY}" "${MULTIUSER_INSTALLMODE_INSTDIR_REGISTRY_VALUENAME}"
+
+      ${if} $MultiUser.InstDir != ""
+        StrCpy $INSTDIR $MultiUser.InstDir
+      ${endif}
+
+    !endif
+
+    !ifdef MULTIUSER_INSTALLMODE_${UNINSTALLER_PREFIX}FUNCTION
+      Call "${MULTIUSER_INSTALLMODE_${UNINSTALLER_PREFIX}FUNCTION}"
+    !endif
+
+  ${endif}
+
+!macroend
+
+!macro MULTIUSER_INSTALLMODE_CURRENTUSER UNINSTALLER_PREFIX UNINSTALLER_FUNCPREFIX
+
+  ;Install mode initialization - per-user
+
+  ${if} ${IsNT}
+
+    StrCpy $MultiUser.InstallMode CurrentUser
+
+    SetShellVarContext current
+
+    !if "${UNINSTALLER_PREFIX}" != UN
+      ;Set default installation location for installer
+      !ifdef MULTIUSER_INSTALLMODE_INSTDIR
+        ${if} ${AtLeastWin2000}
+          StrCpy $INSTDIR "$LOCALAPPDATA\bin\${MULTIUSER_INSTALLMODE_INSTDIR}"
+        ${else}
+          StrCpy $INSTDIR "${GLOBALINSTDIR}\${MULTIUSER_INSTALLMODE_INSTDIR}"
+        ${endif}
+      !endif
+    !endif
+
+    !ifdef MULTIUSER_INSTALLMODE_INSTDIR_REGISTRY_KEY & MULTIUSER_INSTALLMODE_INSTDIR_REGISTRY_VALUENAME
+
+      ReadRegStr $MultiUser.InstDir HKCU "${MULTIUSER_INSTALLMODE_INSTDIR_REGISTRY_KEY}" "${MULTIUSER_INSTALLMODE_INSTDIR_REGISTRY_VALUENAME}"
+
+      ${if} $MultiUser.InstDir != ""
+        StrCpy $INSTDIR $MultiUser.InstDir
+      ${endif}
+
+    !endif
+
+    !ifdef MULTIUSER_INSTALLMODE_${UNINSTALLER_PREFIX}FUNCTION
+      Call "${MULTIUSER_INSTALLMODE_${UNINSTALLER_PREFIX}FUNCTION}"
+    !endif
+
+  ${endif}
+
+!macroend
+
+Function MultiUser.InstallMode.AllUsers
+  !insertmacro MULTIUSER_INSTALLMODE_ALLUSERS "" ""
+FunctionEnd
+
+Function MultiUser.InstallMode.CurrentUser
+  !insertmacro MULTIUSER_INSTALLMODE_CURRENTUSER "" ""
+FunctionEnd
+
+!ifndef MULTIUSER_NOUNINSTALL
+
+Function un.MultiUser.InstallMode.AllUsers
+  !insertmacro MULTIUSER_INSTALLMODE_ALLUSERS UN .un
+FunctionEnd
+
+Function un.MultiUser.InstallMode.CurrentUser
+  !insertmacro MULTIUSER_INSTALLMODE_CURRENTUSER UN .un
+FunctionEnd
+
+!endif
+
+/*
+
+Installer/uninstaller initialization
+
+*/
+
+!macro MULTIUSER_INIT_QUIT UNINSTALLER_FUNCPREFIX
+
+  !ifdef MULTIUSER_INIT_${UNINSTALLER_FUNCPREFIX}FUNCTIONQUIT
+    Call "${MULTIUSER_INIT_${UNINSTALLER_FUNCPREFIX}FUCTIONQUIT}
+  !else
+    Quit
+  !endif
+
+!macroend
+
+!macro MULTIUSER_INIT_TEXTS
+
+  !ifndef MULTIUSER_INIT_TEXT_ADMINREQUIRED
+    !define MULTIUSER_INIT_TEXT_ADMINREQUIRED "$(^Caption) requires Administrator priviledges."
+  !endif
+
+  !ifndef MULTIUSER_INIT_TEXT_POWERREQUIRED
+    !define MULTIUSER_INIT_TEXT_POWERREQUIRED "$(^Caption) requires at least Power User priviledges."
+  !endif
+
+  !ifndef MULTIUSER_INIT_TEXT_ALLUSERSNOTPOSSIBLE
+    !define MULTIUSER_INIT_TEXT_ALLUSERSNOTPOSSIBLE "Your user account does not have sufficient privileges to install $(^Name) for all users of this compuetr."
+  !endif
+
+!macroend
+
+!macro MULTIUSER_INIT_CHECKS UNINSTALLER_PREFIX UNINSTALLER_FUNCPREFIX
+
+  ;Installer initialization - check privileges and set install mode
+
+  !insertmacro MULTIUSER_INIT_TEXTS
+
+  UserInfo::GetAccountType
+  Pop $MultiUser.Privileges
+
+  ${if} ${IsNT}
+
+    ;Check privileges
+
+    !if "${MULTIUSER_EXECUTIONLEVEL}" == Admin
+
+      ${if} $MultiUser.Privileges != "Admin"
+        MessageBox MB_OK|MB_ICONSTOP "${MULTIUSER_INIT_TEXT_ADMINREQUIRED}"
+        !insertmacro MULTIUSER_INIT_QUIT "${UNINSTALLER_FUNCPREFIX}"
+      ${endif}
+
+    !else if "${MULTIUSER_EXECUTIONLEVEL}" == Power
+
+      ${if} $MultiUser.Privileges != "Power"
+        ${andif} $MultiUser.Privileges != "Admin"
+        ${if} ${AtMostWinXP}
+           MessageBox MB_OK|MB_ICONSTOP "${MULTIUSER_INIT_TEXT_POWERREQUIRED}"
+        ${else}
+           MessageBox MB_OK|MB_ICONSTOP "${MULTIUSER_INIT_TEXT_ADMINREQUIRED}"
+        ${endif}
+        !insertmacro MULTIUSER_INIT_QUIT "${UNINSTALLER_FUNCPREFIX}"
+      ${endif}
+
+    !endif
+
+    !ifdef MULTIUSER_EXECUTIONLEVEL_ALLUSERS
+
+      ;Default to per-machine installation if possible
+
+      ${if} $MultiUser.Privileges == "Admin"
+        ${orif} $MultiUser.Privileges == "Power"
+        !ifndef MULTIUSER_INSTALLMODE_DEFAULT_CURRENTUSER
+          Call ${UNINSTALLER_FUNCPREFIX}MultiUser.InstallMode.AllUsers
+        !else
+          Call ${UNINSTALLER_FUNCPREFIX}MultiUser.InstallMode.CurrentUser
+        !endif
+
+        !ifdef MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_KEY & MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_VALUENAME
+
+          ;Set installation mode to setting from a previous installation
+
+          !ifndef MULTIUSER_INSTALLMODE_DEFAULT_CURRENTUSER
+            ReadRegStr $MultiUser.DefaultKeyValue HKLM "${MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_KEY}" "${MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_VALUENAME}"
+            ${if} $MultiUser.DefaultKeyValue == ""
+              ReadRegStr $MultiUser.DefaultKeyValue HKCU "${MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_KEY}" "${MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_VALUENAME}"
+              ${if} $MultiUser.DefaultKeyValue != ""
+                Call ${UNINSTALLER_FUNCPREFIX}MultiUser.InstallMode.CurrentUser
+              ${endif}
+            ${endif}
+          !else
+            ReadRegStr $MultiUser.DefaultKeyValue HKCU "${MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_KEY}" "${MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_VALUENAME}"
+            ${if} $MultiUser.DefaultKeyValue == ""
+              ReadRegStr $MultiUser.DefaultKeyValue HKLM "${MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_KEY}" "${MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_VALUENAME}"
+              ${if} $MultiUser.DefaultKeyValue != ""
+                Call ${UNINSTALLER_FUNCPREFIX}MultiUser.InstallMode.AllUsers
+              ${endif}
+            ${endif}
+          !endif
+
+        !endif
+
+      ${else}
+        Call ${UNINSTALLER_FUNCPREFIX}MultiUser.InstallMode.CurrentUser
+      ${endif}
+
+    !else
+
+      Call ${UNINSTALLER_FUNCPREFIX}MultiUser.InstallMode.CurrentUser
+
+    !endif
+
+    !ifdef MULTIUSER_INSTALLMODE_COMMANDLINE
+
+      ;Check for install mode setting on command line
+
+      ${${UNINSTALLER_FUNCPREFIX}GetParameters} $MultiUser.Parameters
+
+      ${${UNINSTALLER_PREFIX}StrStr} $MultiUser.Result $MultiUser.Parameters "/CurrentUser"
+
+      ${if} $MultiUser.Result != ""
+        Call ${UNINSTALLER_FUNCPREFIX}MultiUser.InstallMode.CurrentUser
+      ${endif}
+
+      ${${UNINSTALLER_PREFIX}StrStr} $MultiUser.Result $MultiUser.Parameters "/AllUsers"
+
+      ${if} $MultiUser.Result != ""
+        ${if} $MultiUser.Privileges == "Admin"
+          ${orif} $MultiUser.Privileges == "Power"
+          Call ${UNINSTALLER_FUNCPREFIX}MultiUser.InstallMode.AllUsers
+        ${else}
+          MessageBox MB_OK|MB_ICONSTOP "${MULTIUSER_INIT_TEXT_ALLUSERSNOTPOSSIBLE}"
+        ${endif}
+      ${endif}
+
+    !endif
+
+  ${else}
+
+    ;Not running Windows NT, per-user installation not supported
+
+    Call ${UNINSTALLER_FUNCPREFIX}MultiUser.InstallMode.AllUsers
+
+  ${endif}
+
+!macroend
+
+!macro MULTIUSER_INIT
+  !verbose push
+  !verbose 3
+
+  !insertmacro MULTIUSER_INIT_CHECKS "" ""
+
+  !verbose pop
+!macroend
+
+!ifndef MULTIUSER_NOUNINSTALL
+
+!macro MULTIUSER_UNINIT
+  !verbose push
+  !verbose 3
+
+  !insertmacro MULTIUSER_INIT_CHECKS Un un.
+
+  !verbose pop
+!macroend
+
+!endif
+
+/*
+
+Modern UI 2 page
+
+*/
+
+!ifdef MULTIUSER_MUI
+
+!macro MULTIUSER_INSTALLMODEPAGE_INTERFACE
+
+  !ifndef MULTIUSER_INSTALLMODEPAGE_INTERFACE
+    !define MULTIUSER_INSTALLMODEPAGE_INTERFACE
+    Var MultiUser.InstallModePage
+
+    Var MultiUser.InstallModePage.Text
+
+    Var MultiUser.InstallModePage.AllUsers
+    Var MultiUser.InstallModePage.CurrentUser
+
+    Var MultiUser.InstallModePage.ReturnValue
+  !endif
+
+!macroend
+
+!macro MULTIUSER_PAGEDECLARATION_INSTALLMODE
+
+  !insertmacro MUI_SET MULTIUSER_${MUI_PAGE_UNINSTALLER_PREFIX}INSTALLMODEPAGE ""
+  !insertmacro MULTIUSER_INSTALLMODEPAGE_INTERFACE
+
+  !insertmacro MUI_DEFAULT MULTIUSER_INSTALLMODEPAGE_TEXT_TOP "$(MULTIUSER_INNERTEXT_INSTALLMODE_TOP)"
+  !insertmacro MUI_DEFAULT MULTIUSER_INSTALLMODEPAGE_TEXT_ALLUSERS "$(MULTIUSER_INNERTEXT_INSTALLMODE_ALLUSERS)"
+  !insertmacro MUI_DEFAULT MULTIUSER_INSTALLMODEPAGE_TEXT_CURRENTUSER "$(MULTIUSER_INNERTEXT_INSTALLMODE_CURRENTUSER)"
+
+  PageEx custom
+
+    PageCallbacks MultiUser.InstallModePre_${MUI_UNIQUEID} MultiUser.InstallModeLeave_${MUI_UNIQUEID}
+
+    Caption " "
+
+  PageExEnd
+
+  !insertmacro MULTIUSER_FUNCTION_INSTALLMODEPAGE MultiUser.InstallModePre_${MUI_UNIQUEID} MultiUser.InstallModeLeave_${MUI_UNIQUEID}
+
+  !undef MULTIUSER_INSTALLMODEPAGE_TEXT_TOP
+  !undef MULTIUSER_INSTALLMODEPAGE_TEXT_ALLUSERS
+  !undef MULTIUSER_INSTALLMODEPAGE_TEXT_CURRENTUSER
+
+!macroend
+
+!macro MULTIUSER_PAGE_INSTALLMODE
+
+  ;Modern UI page for install mode
+
+  !verbose push
+  !verbose 3
+
+  !ifndef MULTIUSER_EXECUTIONLEVEL_ALLUSERS
+    !error "A mixed-mode installation requires MULTIUSER_EXECUTIONLEVEL to be set to Admin, Power or Highest."
+  !endif
+
+  !insertmacro MUI_PAGE_INIT
+  !insertmacro MULTIUSER_PAGEDECLARATION_INSTALLMODE
+
+  !verbose pop
+
+!macroend
+
+!macro MULTIUSER_FUNCTION_INSTALLMODEPAGE PRE LEAVE
+
+  !ifndef MULTIUSER_TEXT_NOTADMIN
+    !define MULTIUSER_TEXT_NOTADMIN "The installer is currently running as an unprivileged user.  It will not be possible to install this software for all users on the system.  Cancel and re-run the installer as Administrator to install system-wide."
+  !endif
+
+  ;Page functions of Modern UI page
+
+  Function "${PRE}"
+
+    ${ifnot} ${IsNT}
+      Abort
+    ${endif}
+
+    ${if} $MultiUser.Privileges != "Power"
+      ${andif} $MultiUser.Privileges != "Admin"
+	MessageBox MB_OKCANCEL "${MULTIUSER_TEXT_NOTADMIN}" /SD IDOK IDABORT nofun
+	Abort
+
+    nofun:
+	Quit
+    ${endif}
+
+    !insertmacro MUI_PAGE_FUNCTION_CUSTOM PRE
+    !insertmacro MUI_HEADER_TEXT_PAGE $(MULTIUSER_TEXT_INSTALLMODE_TITLE) $(MULTIUSER_TEXT_INSTALLMODE_SUBTITLE)
+
+    nsDialogs::Create 1018
+    Pop $MultiUser.InstallModePage
+
+    ${NSD_CreateLabel} 0u 0u 300u 20u "${MULTIUSER_INSTALLMODEPAGE_TEXT_TOP}"
+    Pop $MultiUser.InstallModePage.Text
+
+    ${NSD_CreateRadioButton} 20u 50u 280u 10u "${MULTIUSER_INSTALLMODEPAGE_TEXT_ALLUSERS}"
+    Pop $MultiUser.InstallModePage.AllUsers
+
+    ${NSD_CreateRadioButton} 20u 70u 280u 10u "${MULTIUSER_INSTALLMODEPAGE_TEXT_CURRENTUSER}"
+    Pop $MultiUser.InstallModePage.CurrentUser
+
+    ${if} $MultiUser.InstallMode == "AllUsers"
+      SendMessage $MultiUser.InstallModePage.AllUsers ${BM_SETCHECK} ${BST_CHECKED} 0
+    ${else}
+      SendMessage $MultiUser.InstallModePage.CurrentUser ${BM_SETCHECK} ${BST_CHECKED} 0
+    ${endif}
+
+    !insertmacro MUI_PAGE_FUNCTION_CUSTOM SHOW
+    nsDialogs::Show
+
+  FunctionEnd
+
+  Function "${LEAVE}"
+     SendMessage $MultiUser.InstallModePage.AllUsers ${BM_GETCHECK} 0 0 $MultiUser.InstallModePage.ReturnValue
+
+     ${if} $MultiUser.InstallModePage.ReturnValue = ${BST_CHECKED}
+        Call MultiUser.InstallMode.AllUsers
+     ${else}
+        Call MultiUser.InstallMode.CurrentUser
+     ${endif}
+
+    !insertmacro MUI_PAGE_FUNCTION_CUSTOM LEAVE
+  FunctionEnd
+
+!macroend
+
+!endif
+
+!verbose pop
+!endif