knife-ionoscloud 5.1.2 → 6.0.0

data/docs/subcommands/networkloadbalancer_rule_add.md

@@ -0,0 +1,75 @@
+# NetworkloadbalancerRuleAdd
+
+Adds a Forwarding Rule to a Network Load Balancer under a data center.
+
+```text
+knife ionoscloud networkloadbalancer rule add (options)
+```
+
+## Available options:
+
+### Required options:
+
+* datacenter\_id
+* network\_loadbalancer\_id
+* name
+* listener\_ip
+* listener\_port
+* ionoscloud\_username
+* ionoscloud\_password
+
+```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
+    datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
+        name of the data center (required)
+
+    network_loadbalancer_id: --network-loadbalancer NETWORK_LOADBALANCER_ID, -L NETWORK_LOADBALANCER_ID
+        iD of the Network Loadbalancer (required)
+
+    name: --name NAME, -n NAME
+        a name of that Network Load Balancer forwarding rule (required)
+
+    algorithm: --algorithm ALGORITHM, -a ALGORITHM
+        algorithm for the balancing
+
+    protocol: --protocol PROTOCOL
+        protocol of the balancing
+
+    listener_ip: --ip LISTENER_IP, -i LISTENER_IP
+        listening IP. (inbound) (required)
+
+    listener_port: --port LISTENER_PORT, -p LISTENER_PORT
+        listening port number. (inbound) (range: 1 to 65535) (required)
+
+    client_timeout: --client-timeout CLIENT_TIMEOUT
+        clientTimeout is expressed in milliseconds. This inactivity timeout applies when the client is expected to acknowledge or send data. If unset the default of 50 seconds will be used.
+
+    connect_timeout: --connect-timeout CONNECT_TIMEOUT
+        it specifies the maximum time (in milliseconds) to wait for a connection attempt to a target VM to succeed. If unset, the default of 5 seconds will be used.
+
+    target_timeout: --terget-timeout TARGET_TIMEOUT
+        targetTimeout specifies the maximum inactivity time (in milliseconds) on the target VM side. If unset, the default of 50 seconds will be used.
+
+    retries: --retries RETRIES, -r RETRIES
+        retries specifies the number of retries to perform on a target VM after a connection failure. If unset, the default value of 3 will be used. (valid range: [0, 65535])
+
+    targets: --targets TARGETS
+        array of targets
+
+    ionoscloud_username: --username USERNAME, -u USERNAME
+        your Ionoscloud username (required)
+
+    ionoscloud_password: --password PASSWORD, -p PASSWORD
+        your Ionoscloud password (required)
+
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
+
+```
+## Example
+
+```text
+knife ionoscloud networkloadbalancer rule add --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --network-loadbalancer NETWORK_LOADBALANCER_ID --name NAME --algorithm ALGORITHM --protocol PROTOCOL --ip LISTENER_IP --port LISTENER_PORT --client-timeout CLIENT_TIMEOUT --connect-timeout CONNECT_TIMEOUT --terget-timeout TARGET_TIMEOUT --retries RETRIES --targets TARGETS --username USERNAME --password PASSWORD --url URL
+```

data/docs/subcommands/networkloadbalancer_rule_list.md

@@ -0,0 +1,42 @@
+# NetworkloadbalancerRuleList
+
+Lists all available rules in a Network Loadbalancer under a data center.
+
+```text
+knife ionoscloud networkloadbalancer rule list (options)
+```
+
+## Available options:
+
+### Required options:
+
+* datacenter\_id
+* network\_loadbalancer\_id
+* ionoscloud\_username
+* ionoscloud\_password
+
+```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
+    datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
+        the ID of the data center (required)
+
+    network_loadbalancer_id: --network-loadbalancer NETWORK_LOADBALANCER_ID, -L NETWORK_LOADBALANCER_ID
+        iD of the Network Loadbalancer (required)
+
+    ionoscloud_username: --username USERNAME, -u USERNAME
+        your Ionoscloud username (required)
+
+    ionoscloud_password: --password PASSWORD, -p PASSWORD
+        your Ionoscloud password (required)
+
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
+
+```
+## Example
+
+```text
+knife ionoscloud networkloadbalancer rule list --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --network-loadbalancer NETWORK_LOADBALANCER_ID --username USERNAME --password PASSWORD --url URL
+```

data/docs/subcommands/networkloadbalancer_rule_remove.md

@@ -0,0 +1,42 @@
+# NetworkloadbalancerRuleRemove
+
+Removes the specified rules from a Network Loadbalancer under a data center.
+
+```text
+knife ionoscloud networkloadbalancer rule remove RULE_ID [RULE_ID] (options)
+```
+
+## Available options:
+
+### Required options:
+
+* datacenter\_id
+* network\_loadbalancer\_id
+* ionoscloud\_username
+* ionoscloud\_password
+
+```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
+    datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
+        the ID of the data center (required)
+
+    network_loadbalancer_id: --network-loadbalancer NETWORK_LOADBALANCER_ID, -L NETWORK_LOADBALANCER_ID
+        iD of the Network Loadbalancer (required)
+
+    ionoscloud_username: --username USERNAME, -u USERNAME
+        your Ionoscloud username (required)
+
+    ionoscloud_password: --password PASSWORD, -p PASSWORD
+        your Ionoscloud password (required)
+
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
+
+```
+## Example
+
+```text
+knife ionoscloud networkloadbalancer rule remove RULE_ID 
+```

data/docs/subcommands/networkloadbalancer_rule_target_add.md

@@ -0,0 +1,67 @@
+# NetworkloadbalancerRuleTargetAdd
+
+Adds a target to a Network Load Balancer Forwarding Rule under a data center.
+
+```text
+knife ionoscloud networkloadbalancer rule target add (options)
+```
+
+## Available options:
+
+### Required options:
+
+* datacenter\_id
+* network\_loadbalancer\_id
+* forwarding\_rule\_id
+* ip
+* port
+* weight
+* ionoscloud\_username
+* ionoscloud\_password
+
+```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
+    datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
+        name of the data center (required)
+
+    network_loadbalancer_id: --network-loadbalancer NETWORK_LOADBALANCER_ID, -L NETWORK_LOADBALANCER_ID
+        iD of the Network Loadbalancer (required)
+
+    forwarding_rule_id: --forwarding-rule FORWARDING_RULE_ID, -R FORWARDING_RULE_ID
+        iD of the Network Loadbalancer Forwarding Rule (required)
+
+    ip: --ip IP, -i IP
+        iP of a balanced target VM (required)
+
+    port: --port PORT, -p PORT
+        port of the balanced target service. (range: 1 to 65535) (required)
+
+    weight: --weight WEIGTH, -w WEIGTH
+        weight parameter is used to adjust the target VM's weight relative to other target VMs. All target VMs will receive a load proportional to their weight relative to the sum of all weights, so the higher the weight, the higher the load. The default weight is 1, and the maximal value is 256. A value of 0 means the target VM will not participate in load-balancing but will still accept persistent connections. If this parameter is used to distribute the load according to target VM's capacity, it is recommended to start with values which can both grow and shrink, for instance between 10 and 100 to leave enough room above and below for later adjustments. (required)
+
+    check: --check, -c
+        check specifies whether the target VM's health is checked. If turned off, a target VM is always considered available. If turned on, the target VM is available when accepting periodic TCP connections, to ensure that it is really able to serve requests. The address and port to send the tests to are those of the target VM. The health check only consists of a connection attempt.
+
+    check_interval: --check-interval CHECK_INTERVAL
+        checkInterval determines the duration (in milliseconds) between consecutive health checks. If unspecified a default of 2000 ms is used.
+
+    maintenance: --maintenance MAINTENANCE, -m
+        maintenance specifies if a target VM should be marked as down, even if it is not.
+
+    ionoscloud_username: --username USERNAME, -u USERNAME
+        your Ionoscloud username (required)
+
+    ionoscloud_password: --password PASSWORD, -p PASSWORD
+        your Ionoscloud password (required)
+
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
+
+```
+## Example
+
+```text
+knife ionoscloud networkloadbalancer rule target add --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --network-loadbalancer NETWORK_LOADBALANCER_ID --forwarding-rule FORWARDING_RULE_ID --ip IP --port PORT --weight WEIGTH --check --check-interval CHECK_INTERVAL --maintenance MAINTENANCE --username USERNAME --password PASSWORD --url URL
+```

data/docs/subcommands/networkloadbalancer_rule_target_list.md

@@ -0,0 +1,46 @@
+# NetworkloadbalancerRuleTargetList
+
+Lists all targets of a Network Loadbalancer Forwarding Rule under a data center.
+
+```text
+knife ionoscloud networkloadbalancer rule target list (options)
+```
+
+## Available options:
+
+### Required options:
+
+* datacenter\_id
+* network\_loadbalancer\_id
+* forwarding\_rule\_id
+* ionoscloud\_username
+* ionoscloud\_password
+
+```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
+    datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
+        the ID of the data center (required)
+
+    network_loadbalancer_id: --network-loadbalancer NETWORK_LOADBALANCER_ID, -L NETWORK_LOADBALANCER_ID
+        iD of the Network Loadbalancer (required)
+
+    forwarding_rule_id: --forwarding-rule FORWARDING_RULE_ID, -R FORWARDING_RULE_ID
+        iD of the Network Loadbalancer Forwarding Rule (required)
+
+    ionoscloud_username: --username USERNAME, -u USERNAME
+        your Ionoscloud username (required)
+
+    ionoscloud_password: --password PASSWORD, -p PASSWORD
+        your Ionoscloud password (required)
+
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
+
+```
+## Example
+
+```text
+knife ionoscloud networkloadbalancer rule target list --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --network-loadbalancer NETWORK_LOADBALANCER_ID --forwarding-rule FORWARDING_RULE_ID --username USERNAME --password PASSWORD --url URL
+```

data/docs/subcommands/networkloadbalancer_rule_target_remove.md

@@ -0,0 +1,54 @@
+# NetworkloadbalancerRuleTargetRemove
+
+Adds a target to a Network Load Balancer Forwarding Rule under a data center.
+
+```text
+knife ionoscloud networkloadbalancer rule target remove (options)
+```
+
+## Available options:
+
+### Required options:
+
+* datacenter\_id
+* network\_loadbalancer\_id
+* forwarding\_rule\_id
+* ip
+* port
+* ionoscloud\_username
+* ionoscloud\_password
+
+```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
+    datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
+        name of the data center (required)
+
+    network_loadbalancer_id: --network-loadbalancer NETWORK_LOADBALANCER_ID, -L NETWORK_LOADBALANCER_ID
+        iD of the Network Loadbalancer (required)
+
+    forwarding_rule_id: --forwarding-rule FORWARDING_RULE_ID, -R FORWARDING_RULE_ID
+        iD of the Network Loadbalancer Forwarding Rule (required)
+
+    ip: --ip IP, -i IP
+        iP of a balanced target VM (required)
+
+    port: --port PORT, -p PORT
+        port of the balanced target service. (range: 1 to 65535) (required)
+
+    ionoscloud_username: --username USERNAME, -u USERNAME
+        your Ionoscloud username (required)
+
+    ionoscloud_password: --password PASSWORD, -p PASSWORD
+        your Ionoscloud password (required)
+
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
+
+```
+## Example
+
+```text
+knife ionoscloud networkloadbalancer rule target remove --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --network-loadbalancer NETWORK_LOADBALANCER_ID --forwarding-rule FORWARDING_RULE_ID --ip IP --port PORT --username USERNAME --password PASSWORD --url URL
+```

data/docs/subcommands/networkloadbalancer_rule_update.md

@@ -0,0 +1,75 @@
+# NetworkloadbalancerRuleUpdate
+
+Updates information about a Ionoscloud Network Load Balancer.
+
+```text
+knife ionoscloud networkloadbalancer rule update (options)
+```
+
+## Available options:
+
+### Required options:
+
+* datacenter\_id
+* network\_loadbalancer\_id
+* ionoscloud\_username
+* ionoscloud\_password
+
+```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
+    datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
+        iD of the data center (required)
+
+    network_loadbalancer_id: --network-loadbalancer NETWORK_LOADBALANCER_ID, -L NETWORK_LOADBALANCER_ID
+        iD of the Network Loadbalancer (required)
+
+    forwarding_rule_id: --forwarding-rule FORWARDING_RULE_ID, -R FORWARDING_RULE_ID
+        iD of the Network Loadbalancer Forwarding Rule
+
+    name: --name NAME, -n NAME
+        a name of that Network Load Balancer forwarding rule
+
+    algorithm: --algorithm ALGORITHM, -a ALGORITHM
+        algorithm for the balancing
+
+    protocol: --protocol PROTOCOL
+        protocol of the balancing
+
+    listener_ip: --ip LISTENER_IP, -i LISTENER_IP
+        listening IP. (inbound)
+
+    listener_port: --port LISTENER_PORT, -p LISTENER_PORT
+        listening port number. (inbound) (range: 1 to 65535)
+
+    client_timeout: --client-timeout CLIENT_TIMEOUT
+        clientTimeout is expressed in milliseconds. This inactivity timeout applies when the client is expected to acknowledge or send data. If unset the default of 50 seconds will be used.
+
+    connect_timeout: --connect-timeout CONNECT_TIMEOUT
+        it specifies the maximum time (in milliseconds) to wait for a connection attempt to a target VM to succeed. If unset, the default of 5 seconds will be used.
+
+    target_timeout: --terget-timeout TARGET_TIMEOUT
+        targetTimeout specifies the maximum inactivity time (in milliseconds) on the target VM side. If unset, the default of 50 seconds will be used.
+
+    retries: --retries RETRIES, -r RETRIES
+        retries specifies the number of retries to perform on a target VM after a connection failure. If unset, the default value of 3 will be used. (valid range: [0, 65535])
+
+    targets: --targets TARGETS
+        array of targets
+
+    ionoscloud_username: --username USERNAME, -u USERNAME
+        your Ionoscloud username (required)
+
+    ionoscloud_password: --password PASSWORD, -p PASSWORD
+        your Ionoscloud password (required)
+
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
+
+```
+## Example
+
+```text
+knife ionoscloud networkloadbalancer rule update --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --network-loadbalancer NETWORK_LOADBALANCER_ID --forwarding-rule FORWARDING_RULE_ID --name NAME --algorithm ALGORITHM --protocol PROTOCOL --ip LISTENER_IP --port LISTENER_PORT --client-timeout CLIENT_TIMEOUT --connect-timeout CONNECT_TIMEOUT --terget-timeout TARGET_TIMEOUT --retries RETRIES --targets TARGETS --username USERNAME --password PASSWORD --url URL
+```

data/docs/subcommands/networkloadbalancer_update.md

@@ -0,0 +1,57 @@
+# NetworkloadbalancerUpdate
+
+Updates information about a Ionoscloud Network Load Balancer.
+
+```text
+knife ionoscloud networkloadbalancer update (options)
+```
+
+## Available options:
+
+### Required options:
+
+* datacenter\_id
+* network\_loadbalancer\_id
+* ionoscloud\_username
+* ionoscloud\_password
+
+```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
+    datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
+        iD of the data center (required)
+
+    network_loadbalancer_id: --network-loadbalancer NETWORK_LOADBALANCER_ID, -L NETWORK_LOADBALANCER_ID
+        iD of the Network Loadbalancer (required)
+
+    name: --name NAME, -n NAME
+        name of the load balancer
+
+    listener_lan: --listener-lan LISTENER_LAN_ID, -l LISTENER_LAN_ID
+        id of the listening LAN. (inbound)
+
+    target_lan: --target-lan TARGET_LAN_ID, -t TARGET_LAN_ID
+        id of the balanced private target LAN. (outbound)
+
+    ips: --ips IP[,IP,...], -i IP[,IP,...]
+        collection of IP addresses of the Network Load Balancer. (inbound and outbound) IP of the listenerLan must be a customer reserved IP for the public load balancer and private IP for the private load balancer.
+
+    lb_private_ips: --private-ips IP[,IP,...]
+        collection of private IP addresses with subnet mask of the Network Load Balancer. IPs must contain valid subnet mask. If user will not provide any IP then the system will generate one IP with /24 subnet.
+
+    ionoscloud_username: --username USERNAME, -u USERNAME
+        your Ionoscloud username (required)
+
+    ionoscloud_password: --password PASSWORD, -p PASSWORD
+        your Ionoscloud password (required)
+
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
+
+```
+## Example
+
+```text
+knife ionoscloud networkloadbalancer update --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --network-loadbalancer NETWORK_LOADBALANCER_ID --name NAME --listener-lan LISTENER_LAN_ID --target-lan TARGET_LAN_ID --ips IP[,IP,...] --private-ips IP[,IP,...] --username USERNAME --password PASSWORD --url URL
+```

data/docs/subcommands/nic_create.md

@@ -17,6 +17,9 @@ knife ionoscloud nic create (options)
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
         name of the data center (required)
 
@@ -44,12 +47,12 @@ knife ionoscloud nic create (options)
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example
 
 ```text
-knife ionoscloud nic create --datacenter-id DATACENTER_ID --server-id SERVER_ID --name NAME --ips IP[,IP,...] --dhcp DHCP --lan ID --nat NAT --username USERNAME --password PASSWORD --extra-config EXTRA_CONFIG_FILE_PATH
+knife ionoscloud nic create --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --server-id SERVER_ID --name NAME --ips IP[,IP,...] --dhcp DHCP --lan ID --nat NAT --username USERNAME --password PASSWORD --url URL
 ```

data/docs/subcommands/nic_delete.md

@@ -16,6 +16,9 @@ knife ionoscloud nic delete NIC_ID [NIC_ID] (options)
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
         the ID of the data center (required)
 
@@ -28,8 +31,8 @@ knife ionoscloud nic delete NIC_ID [NIC_ID] (options)
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example

data/docs/subcommands/nic_get.md

@@ -17,6 +17,9 @@ knife ionoscloud nic get (options)
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
         iD of the data center (required)
 
@@ -32,12 +35,12 @@ knife ionoscloud nic get (options)
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example
 
 ```text
-knife ionoscloud nic get --datacenter-id DATACENTER_ID --server-id SERVER_ID --nic-id NIC_ID --username USERNAME --password PASSWORD --extra-config EXTRA_CONFIG_FILE_PATH
+knife ionoscloud nic get --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --server-id SERVER_ID --nic-id NIC_ID --username USERNAME --password PASSWORD --url URL
 ```

data/docs/subcommands/nic_list.md

@@ -16,6 +16,9 @@ knife ionoscloud nic list (options)
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
         the ID of the datacenter containing the NIC (required)
 
@@ -28,12 +31,12 @@ knife ionoscloud nic list (options)
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example
 
 ```text
-knife ionoscloud nic list --datacenter-id DATACENTER_ID --server-id SERVER_ID --username USERNAME --password PASSWORD --extra-config EXTRA_CONFIG_FILE_PATH
+knife ionoscloud nic list --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --server-id SERVER_ID --username USERNAME --password PASSWORD --url URL
 ```

data/docs/subcommands/nic_update.md

@@ -17,6 +17,9 @@ knife ionoscloud nic update (options)
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
         iD of the data center (required)
 
@@ -47,12 +50,12 @@ knife ionoscloud nic update (options)
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example
 
 ```text
-knife ionoscloud nic update --datacenter-id DATACENTER_ID --server-id SERVER_ID --nic-id NIC_ID --name NAME --ips IP[,IP,...] --dhcp DHCP --lan ID --nat NAT --username USERNAME --password PASSWORD --extra-config EXTRA_CONFIG_FILE_PATH
+knife ionoscloud nic update --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --server-id SERVER_ID --nic-id NIC_ID --name NAME --ips IP[,IP,...] --dhcp DHCP --lan ID --nat NAT --username USERNAME --password PASSWORD --url URL
 ```

data/docs/subcommands/node_delete.md

@@ -16,6 +16,9 @@ knife ionoscloud node delete NODE_ID [NODE_ID] (options)
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     cluster_id: --cluster-id CLUSTER_ID, -C CLUSTER_ID
         the ID of the K8s Cluster (required)
 
@@ -28,8 +31,8 @@ knife ionoscloud node delete NODE_ID [NODE_ID] (options)
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example

data/docs/subcommands/node_get.md

@@ -17,6 +17,9 @@ knife ionoscloud node get (options)
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     cluster_id: --cluster-id CLUSTER_ID, -C CLUSTER_ID
         the ID of the K8s Cluster (required)
 
@@ -32,12 +35,12 @@ knife ionoscloud node get (options)
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example
 
 ```text
-knife ionoscloud node get --cluster-id CLUSTER_ID --nodepool-id NODEPOOL_ID --node-id NODE_ID --username USERNAME --password PASSWORD --extra-config EXTRA_CONFIG_FILE_PATH
+knife ionoscloud node get --extra-config EXTRA_CONFIG_FILE_PATH --cluster-id CLUSTER_ID --nodepool-id NODEPOOL_ID --node-id NODE_ID --username USERNAME --password PASSWORD --url URL
 ```

data/docs/subcommands/node_list.md

@@ -16,6 +16,9 @@ knife ionoscloud node list
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     cluster_id: --cluster-id CLUSTER_ID, -C CLUSTER_ID
         the ID of the K8s Cluster (required)
 
@@ -28,12 +31,12 @@ knife ionoscloud node list
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example
 
 ```text
-knife ionoscloud node list--cluster-id CLUSTER_ID --nodepool-id NODEPOOL_ID --username USERNAME --password PASSWORD --extra-config EXTRA_CONFIG_FILE_PATH
+knife ionoscloud node list--extra-config EXTRA_CONFIG_FILE_PATH --cluster-id CLUSTER_ID --nodepool-id NODEPOOL_ID --username USERNAME --password PASSWORD --url URL
 ```