johnson 1.2.0 → 2.0.0.pre0

data/vendor/tracemonkey/editline/Makefile.in

@@ -0,0 +1,55 @@
+# -*- Mode: makefile -*-
+#
+# ***** BEGIN LICENSE BLOCK *****
+# Version: MPL 1.1/GPL 2.0/LGPL 2.1
+#
+# The contents of this file are subject to the Mozilla Public License Version
+# 1.1 (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+# for the specific language governing rights and limitations under the
+# License.
+#
+# The Original Code is Spidermonkey build system.
+#
+# The Initial Developer of the Original Code is
+# The Mozilla Foundation.
+# Portions created by the Initial Developer are Copyright (C) 2008
+# the Initial Developer. All Rights Reserved.
+#
+# Contributor(s):
+# Ted Mielczarek <ted.mielczarek@gmail.com>
+#
+# Alternatively, the contents of this file may be used under the terms of
+# either of the GNU General Public License Version 2 or later (the "GPL"),
+# or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+# in which case the provisions of the GPL or the LGPL are applicable instead
+# of those above. If you wish to allow use of your version of this file only
+# under the terms of either the GPL or the LGPL, and not to allow others to
+# use your version of this file under the terms of the MPL, indicate your
+# decision by deleting the provisions above and replace them with the notice
+# and other provisions required by the GPL or the LGPL. If you do not delete
+# the provisions above, a recipient may use your version of this file under
+# the terms of any one of the MPL, the GPL or the LGPL.
+#
+# ***** END LICENSE BLOCK *****
+
+DEPTH = ..
+topsrcdir	= @top_srcdir@
+srcdir		= @srcdir@
+VPATH           = @srcdir@
+
+include $(DEPTH)/config/autoconf.mk
+
+LIBRARY_NAME = editline
+FORCE_STATIC_LIB = 1
+
+CSRCS = editline.c sysunix.c
+
+DEFINES += -DANSI_ARROWS -DHAVE_TCGETATTR -DHIDE -DUSE_DIRENT -DSYS_UNIX \
+	-DHAVE_STDLIB -DUNIQUE_HISTORY
+
+include $(topsrcdir)/config/rules.mk

data/vendor/tracemonkey/editline/Makefile.ref

@@ -0,0 +1,143 @@
+# -*- Mode: makefile -*-
+#
+# ***** BEGIN LICENSE BLOCK *****
+# Version: MPL 1.1/GPL 2.0/LGPL 2.1
+#
+# The contents of this file are subject to the Mozilla Public License Version
+# 1.1 (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+# for the specific language governing rights and limitations under the
+# License.
+#
+# The Original Code is Mozilla Communicator client code, released
+# March 31, 1998.
+#
+# The Initial Developer of the Original Code is
+# Simmule Turner and Rich Salz.
+# Portions created by the Initial Developer are Copyright (C) 1998
+# the Initial Developer. All Rights Reserved.
+#
+# Contributor(s):
+#
+# Alternatively, the contents of this file may be used under the terms of
+# either the GNU General Public License Version 2 or later (the "GPL"), or
+# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+# in which case the provisions of the GPL or the LGPL are applicable instead
+# of those above. If you wish to allow use of your version of this file only
+# under the terms of either the GPL or the LGPL, and not to allow others to
+# use your version of this file under the terms of the MPL, indicate your
+# decision by deleting the provisions above and replace them with the notice
+# and other provisions required by the GPL or the LGPL. If you do not delete
+# the provisions above, a recipient may use your version of this file under
+# the terms of any one of the MPL, the GPL or the LGPL.
+#
+# ***** END LICENSE BLOCK *****
+
+#
+# Copyright 1992,1993 Simmule Turner and Rich Salz.  All rights reserved.
+#
+# This software is not subject to any license of the American Telephone
+# and Telegraph Company or of the Regents of the University of California.
+#
+# Permission is granted to anyone to use this software for any purpose on
+# any computer system, and to alter it and redistribute it freely, subject
+# to the following restrictions:
+# 1. The authors are not responsible for the consequences of use of this
+#    software, no matter how awful, even if they arise from flaws in it.
+# 2. The origin of this software must not be misrepresented, either by
+#    explicit claim or by omission.  Since few users ever read sources,
+#    credits must appear in the documentation.
+# 3. Altered versions must be plainly marked as such, and must not be
+#    misrepresented as being the original software.  Since few users
+#    ever read sources, credits must appear in the documentation.
+# 4. This notice may not be removed or altered.
+#
+
+#
+#  Unix makefile for editline library.
+#
+
+##  Set your options:
+##	-DANSI_ARROWS		ANSI arrows keys work like emacs.
+##	-DHAVE_STDLIB		Have <stdlib.h>.
+##	-DHAVE_TCGETATTR	Have tcgetattr(), tcsetattr().
+##	-DHAVE_TERMIO		Have "struct termio" and <termio.h>
+##	(If neither of above two, we use <sgttyb.h> and BSD ioctl's)
+##	-DHIDE			Make static functions static (non debug).
+##	-DHIST_SIZE=n		History size.
+##	-DNEED_STRDUP		Don't have strdup().
+##	-DUNIQUE_HISTORY	Don't save command if same as last one.
+##	-DUSE_DIRENT		Use <dirent.h>, not <sys/dir.h>?
+##	-DUSE_TERMCAP		Use the termcap library for terminal size
+##				see LDFLAGS, below, if you set this.
+##	-DNEED_PERROR		Don't have perror() (used in testit)
+
+##  If you have -DUSE_TERMCAP, set this as appropriate:
+#LDFLAGS = -ltermlib
+#LDFLAGS = -ltermcap
+
+DEFS	= -DANSI_ARROWS -DHAVE_TCGETATTR -DHIDE -DUSE_DIRENT -DSYS_UNIX \
+	-DHAVE_STDLIB -DUNIQUE_HISTORY
+
+DEPTH           = ..
+
+include $(DEPTH)/config.mk
+
+LOCAL_OBJDIR = $(OBJDIR)/editline
+
+#
+# Default IEEE libm
+#
+CFLAGS          += -DXP_UNIX $(OPTIMIZER) $(OS_CFLAGS) $(DEFINES) $(INCLUDES) \
+		  -DJSFILE $(XCFLAGS) $(DEFS)
+
+INCFILES = editline.h
+.INIT: $(INCFILES)
+.KEEP_STATE:
+EDITLINE_CFILES = editline.c sysunix.c
+
+EDITLINE_OBJS = $(addprefix $(LOCAL_OBJDIR)/, $(EDITLINE_CFILES:.c=.o))
+
+LIBRARY = $(LOCAL_OBJDIR)/libedit.a
+
+all: $(LIBRARY) 
+
+export:
+
+# make objects to depen on $(LOCAL_OBJDIR) only when it exists
+$(EDITLINE_OBJS) : $(filter-out $(wildcard $(LOCAL_OBJDIR)), $(LOCAL_OBJDIR))
+
+$(LOCAL_OBJDIR) :
+	mkdir -p $@
+
+$(LOCAL_OBJDIR)/%: %.c
+	$(CC) -o $@ $(CFLAGS) $*.c $(LDFLAGS)
+
+$(LOCAL_OBJDIR)/%.o: %.c
+	$(CC) -o $@ -c $(CFLAGS) $*.c
+
+$(LOCAL_OBJDIR)/%.o: %.s
+	$(AS) -o $@ $(ASFLAGS) $*.s
+
+$(LIBRARY): $(EDITLINE_OBJS)
+	$(AR) rv $@ $?
+	$(RANLIB) $@
+
+#libedit.a : $(EDITLINE_OBJS) 
+#	$(AR) cru $(LOCAL_OBJDIR)/libedit.a $(EDITLINE_OBJS)
+#	$(RANLIB) $(LOCAL_OBJDIR)/libedit.a
+
+clean:
+	rm -rf $(EDITLINE_OBJS) $(EDITLINE_OBJS:.o=.d)
+
+clobber: clean
+	rm -rf $(LIBRARY) $(DEPENDENCIES)
+	if test -d $(LOCAL_OBJDIR); then rmdir $(LOCAL_OBJDIR); fi
+
+SUFFIXES: .i
+%.i: %.c
+	$(CC) -C -E $(CFLAGS) $< > $*.i

data/vendor/tracemonkey/editline/README

@@ -0,0 +1,83 @@
+The files in this directory provide simple line-editing and history
+support for the standalone javascript engine, through the 'editline'
+library.
+
+editline has only been enabled for those platforms on which it is
+known to build; to try it on a different platform, define JS_EDITLINE
+before building.  Line editing (and js.c) is not a supported feature
+of the javascript library, so your mileage my vary.
+
+The editline API is a compatible subset of the FSF readline API; if
+you have readline installed and would like to link to that instead,
+define JS_READLINE.  Note that the readline library is distributed
+under the GPL, so any resulting binaries are not legally
+distributable.
+
+The editline files used here have been modified to work with the js
+build system and to quiet some compiler warnings, and also to remove
+filename-completion support.
+
+If anyone knows of a more recent version of these files, or a site on
+which they are being maintained, please let me know!
+
+Mike McCabe, mccabe@netscape.com
+
+
+The original README file distributed with the editline library follows.
+
+
+
+This is a line-editing library.  It can be linked into almost any
+program to provide command-line editing and recall.
+
+It is call-compatible with the FSF readline library, but it is a
+fraction of the size (and offers fewer features).  It does not use
+standard I/O.  It is distributed under a "C News-like" copyright.
+
+Configuration is done in the Makefile.  Type "make testit" to get
+a small slow shell for testing.
+
+An earlier version was distributed with Byron's rc.  Principal
+changes over that version include:
+	Faster.
+	Is eight-bit clean (thanks to brendan@cs.widener.edu)
+	Written in K&R C, but ANSI compliant (gcc all warnings)
+	Propagates EOF properly; rc trip test now passes
+	Doesn't need or use or provide memmove.
+	More robust
+	Calling sequence changed to be compatible with readline.
+	Test program, new manpage, better configuration
+	More system-independant; includes Unix and OS-9 support.
+
+This contains some changes since the posting to comp.sources.misc:
+	Bugfix for completion on absolute pathnames.
+	Better handling of M-n versus showing raw 8bit chars.
+	Better signal handling.
+	Now supports termios/termio/sgttyb ioctl's.
+	Add M-m command to toggle how 8bit data is displayed.
+
+There is one known bug:
+	History-searching redraws the line wrong if the text
+	retrieved is shorter then the prompt.
+
+Enjoy,
+	Rich $alz
+	<rsalz@osf.org>
+
+ Copyright 1992,1993 Simmule Turner and Rich Salz.  All rights reserved.
+
+ This software is not subject to any license of the American Telephone
+ and Telegraph Company or of the Regents of the University of California.
+
+ Permission is granted to anyone to use this software for any purpose on
+ any computer system, and to alter it and redistribute it freely, subject
+ to the following restrictions:
+ 1. The authors are not responsible for the consequences of use of this
+    software, no matter how awful, even if they arise from flaws in it.
+ 2. The origin of this software must not be misrepresented, either by
+    explicit claim or by omission.  Since few users ever read sources,
+    credits must appear in the documentation.
+ 3. Altered versions must be plainly marked as such, and must not be
+    misrepresented as being the original software.  Since few users
+    ever read sources, credits must appear in the documentation.
+ 4. This notice may not be removed or altered.

data/vendor/tracemonkey/editline/editline.3

@@ -0,0 +1,175 @@
+.TH EDITLINE 3
+.SH NAME
+editline \- command-line editing library with history
+.SH SYNOPSIS
+.nf
+.B "char *"
+.B "readline(prompt)"
+.B "     char	*prompt;"
+
+.B "void"
+.B "add_history(line)"
+.B "    char	*line;"
+.fi
+.SH DESCRIPTION
+.I Editline
+is a library that provides an line-editing interface with text recall.
+It is intended to be compatible with the
+.I readline
+library provided by the Free Software Foundation, but much smaller.
+The bulk of this manual page describes the user interface.
+.PP
+The
+.I readline
+routine returns a line of text with the trailing newline removed.
+The data is returned in a buffer allocated with
+.IR malloc (3),
+so the space should be released with
+.IR free (3)
+when the calling program is done with it.
+Before accepting input from the user, the specified
+.I prompt
+is displayed on the terminal.
+.PP
+The
+.I add_history
+routine makes a copy of the specified
+.I line
+and adds it to the internal history list.
+.SS "User Interface"
+A program that uses this library provides a simple emacs-like editing
+interface to its users.
+A line may be edited before it is sent to the calling program by typing either
+control characters or escape sequences.
+A control character, shown as a caret followed by a letter, is typed by
+holding down the ``control'' key while the letter is typed.
+For example, ``^A'' is a control-A.
+An escape sequence is entered by typing the ``escape'' key followed by one or
+more characters.
+The escape key is abbreviated as ``ESC.''
+Note that unlike control keys, case matters in escape sequences; ``ESC\ F''
+is not the same as ``ESC\ f''.
+.PP
+An editing command may be typed anywhere on the line, not just at the
+beginning.
+In addition, a return may also be typed anywhere on the line, not just at
+the end.
+.PP
+Most editing commands may be given a repeat count,
+.IR n ,
+where
+.I n
+is a number.
+To enter a repeat count, type the escape key, the number, and then
+the command to execute.
+For example, ``ESC\ 4\ ^f'' moves forward four characters.
+If a command may be given a repeat count then the text ``[n]'' is given at the
+end of its description.
+.PP
+The following control characters are accepted:
+.RS
+.nf
+.ta \w'ESC DEL  'u
+^A	Move to the beginning of the line
+^B	Move left (backwards) [n]
+^D	Delete character [n]
+^E	Move to end of line
+^F	Move right (forwards) [n]
+^G	Ring the bell
+^H	Delete character before cursor (backspace key) [n]
+^I	Complete filename (tab key); see below
+^J	Done with line (return key)
+^K	Kill to end of line (or column [n])
+^L	Redisplay line
+^M	Done with line (alternate return key)
+^N	Get next line from history [n]
+^P	Get previous line from history [n]
+^R	Search backward (forward if [n]) through history for text;
+\&	must start line if text begins with an uparrow
+^T	Transpose characters
+^V	Insert next character, even if it is an edit command
+^W	Wipe to the mark
+^X^X	Exchange current location and mark
+^Y	Yank back last killed text
+^[	Start an escape sequence (escape key)
+^]c	Move forward to next character ``c''
+^?	Delete character before cursor (delete key) [n]
+.fi
+.RE
+.PP
+The following escape sequences are provided.
+.RS
+.nf
+.ta \w'ESC DEL  'u
+ESC\ ^H	Delete previous word (backspace key) [n]
+ESC\ DEL	Delete previous word (delete key) [n]
+ESC\ SP	Set the mark (space key); see ^X^X and ^Y above
+ESC\ \.	Get the last (or [n]'th) word from previous line
+ESC\ \?	Show possible completions; see below
+ESC\ <	Move to start of history
+ESC\ >	Move to end of history
+ESC\ b	Move backward a word [n]
+ESC\ d	Delete word under cursor [n]
+ESC\ f	Move forward a word [n]
+ESC\ l	Make word lowercase [n]
+ESC\ m	Toggle if 8bit chars display normally or with ``M\-'' prefix
+ESC\ u	Make word uppercase [n]
+ESC\ y	Yank back last killed text
+ESC\ v	Show library version
+ESC\ w	Make area up to mark yankable
+ESC\ nn	Set repeat count to the number nn
+ESC\ C	Read from environment variable ``_C_'', where C is
+\&	an uppercase letter
+.fi
+.RE
+.PP
+The
+.I editline
+library has a small macro facility.
+If you type the escape key followed by an uppercase letter,
+.IR C ,
+then the contents of the environment variable
+.I _C_
+are read in as if you had typed them at the keyboard.
+For example, if the variable
+.I _L_
+contains the following:
+.RS
+^A^Kecho '^V^[[H^V^[[2J'^M
+.RE
+Then typing ``ESC L'' will move to the beginning of the line, kill the
+entire line, enter the echo command needed to clear the terminal (if your
+terminal is like a VT-100), and send the line back to the shell.
+.PP
+The
+.I editline
+library also does filename completion.
+Suppose the root directory has the following files in it:
+.RS
+.nf
+.ta \w'core   'u
+bin	vmunix
+core	vmunix.old
+.fi
+.RE
+If you type ``rm\ /v'' and then the tab key.
+.I Editline
+will then finish off as much of the name as possible by adding ``munix''.
+Because the name is not unique, it will then beep.
+If you type the escape key and a question mark, it will display the
+two choices.
+If you then type a period and a tab, the library will finish off the filename
+for you:
+.RS
+.nf
+.RI "rm /v[TAB]" munix .TAB old
+.fi
+.RE
+The tab key is shown by ``[TAB]'' and the automatically-entered text
+is shown in italics.
+.SH "BUGS AND LIMITATIONS"
+Cannot handle lines more than 80 columns.
+.SH AUTHORS
+Simmule R. Turner <uunet.uu.net!capitol!sysgo!simmy>
+and Rich $alz <rsalz@osf.org>.
+Original manual page by DaviD W. Sanderson <dws@ssec.wisc.edu>.