johnson 1.2.0 → 2.0.0.pre0

data/vendor/tracemonkey/build/autoconf/moznbytetype.m4

@@ -0,0 +1,136 @@
+dnl ***** BEGIN LICENSE BLOCK *****
+dnl Version: MPL 1.1/GPL 2.0/LGPL 2.1
+dnl
+dnl The contents of this file are subject to the Mozilla Public License Version
+dnl 1.1 (the "License"); you may not use this file except in compliance with
+dnl the License. You may obtain a copy of the License at
+dnl http://www.mozilla.org/MPL/
+dnl
+dnl Software distributed under the License is distributed on an "AS IS" basis,
+dnl WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+dnl for the specific language governing rights and limitations under the
+dnl License.
+dnl
+dnl The Original Code is mozilla.org code.
+dnl
+dnl The Initial Developer of the Original Code is
+dnl   The Mozilla Foundation
+dnl Portions created by the Initial Developer are Copyright (C) 2008
+dnl the Initial Developer. All Rights Reserved.
+dnl
+dnl Contributor(s):
+dnl   Jim Blandy
+dnl
+dnl Alternatively, the contents of this file may be used under the terms of
+dnl either of the GNU General Public License Version 2 or later (the "GPL"),
+dnl or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+dnl in which case the provisions of the GPL or the LGPL are applicable instead
+dnl of those above. If you wish to allow use of your version of this file only
+dnl under the terms of either the GPL or the LGPL, and not to allow others to
+dnl use your version of this file under the terms of the MPL, indicate your
+dnl decision by deleting the provisions above and replace them with the notice
+dnl and other provisions required by the GPL or the LGPL. If you do not delete
+dnl the provisions above, a recipient may use your version of this file under
+dnl the terms of any one of the MPL, the GPL or the LGPL.
+dnl
+dnl ***** END LICENSE BLOCK *****
+
+dnl MOZ_N_BYTE_TYPE(VARIABLE, SIZE, POSSIBLE-TYPES)
+dnl
+dnl Check to see which of POSSIBLE-TYPES has a size of SIZE.  If we
+dnl find one, define VARIABLE to be the size-BYTE type.  If no type
+dnl matches, exit the configure script with an error message.  Types
+dnl whose written form contains spaces should appear in POSSIBLE-TYPES
+dnl enclosed by shell quotes.
+dnl
+dnl The cache variable moz_cv_n_byte_type_VARIABLE gets set to the
+dnl type, if found.
+dnl 
+dnl for example:
+dnl MOZ_N_BYTE_TYPE([JS_INT32_T], [4], [int long 'long long' short])
+dnl
+AC_DEFUN(MOZ_N_BYTE_TYPE,
+[
+dnl The simplest approach would simply be to run a program that says
+dnl   printf ("%d\n", sizeof ($type));
+dnl But that won't work when cross-compiling; this will.
+AC_CACHE_CHECK([for a $2-byte type], moz_cv_n_byte_type_$1, [
+  moz_cv_n_byte_type_$1=
+  for type in $3; do
+    AC_TRY_COMPILE([],
+                   [
+                     int a[sizeof ($type) == $2 ? 1 : -1];
+                     return;
+                   ],
+                   [moz_cv_n_byte_type_$1=$type; break], [])
+  done
+  if test ! "$moz_cv_n_byte_type_$1"; then
+    AC_MSG_ERROR([Couldn't find a $2-byte type])
+  fi
+])
+AC_DEFINE_UNQUOTED($1, [$moz_cv_n_byte_type_$1],
+                   [a $2-byte type on the target machine])
+])
+
+dnl MOZ_SIZE_OF_TYPE(VARIABLE, TYPE, POSSIBLE-SIZES)
+dnl
+dnl Check to see which of POSSIBLE-SIZES is the sizeof(TYPE). If we find one,
+dnl define VARIABLE SIZE. If no size matches, exit the configure script with
+dnl an error message.
+dnl
+dnl The cache variable moz_cv_size_of_VARIABLE gets set to the size, if
+dnl found.
+dnl
+dnl for example:
+dnl MOZ_SIZE_OF_TYPE([JS_BYTES_PER_WORD], [void*], [4 8])
+AC_DEFUN(MOZ_SIZE_OF_TYPE,
+[
+AC_CACHE_CHECK([for the size of $2], moz_cv_size_of_$1, [
+  moz_cv_size_of_$1=
+  for size in $3; do
+    AC_TRY_COMPILE([],
+                   [
+                     int a[sizeof ($2) == $size ? 1 : -1];
+                     return;
+                   ],
+                   [moz_cv_size_of_$1=$size; break], [])
+  done
+  if test ! "$moz_cv_size_of_$1"; then
+    AC_MSG_ERROR([No size found for $2])
+  fi
+])
+AC_DEFINE_UNQUOTED($1, [$moz_cv_size_of_$1])
+])
+
+dnl MOZ_ALIGN_OF_TYPE(VARIABLE, TYPE, POSSIBLE-ALIGNS)
+dnl
+dnl Check to see which of POSSIBLE-ALIGNS is the necessary alignment of TYPE.
+dnl If we find one, define VARIABLE ALIGNMENT. If no alignment matches, exit
+dnl the configure script with an error message.
+dnl
+dnl The cache variable moz_cv_align_of_VARIABLE gets set to the size, if
+dnl found.
+dnl
+dnl for example:
+dnl MOZ_ALIGN_OF_TYPE(JS_ALIGN_OF_POINTER, void*, 2 4 8 16)
+AC_DEFUN(MOZ_ALIGN_OF_TYPE,
+[
+AC_CACHE_CHECK([for the alignment of $2], moz_cv_align_of_$1, [
+  moz_cv_align_of_$1=
+  for align in $3; do
+    AC_TRY_COMPILE([
+                     #include <stddef.h>
+                     struct aligner { char c; $2 a; };
+                   ],
+                   [
+                     int a[offsetof(struct aligner, a) == $align ? 1 : -1];
+                     return;
+                   ],
+                   [moz_cv_align_of_$1=$align; break], [])
+  done
+  if test ! "$moz_cv_align_of_$1"; then
+    AC_MSG_ERROR([No alignment found for $2])
+  fi
+])
+AC_DEFINE_UNQUOTED($1, [$moz_cv_align_of_$1])
+])

data/vendor/tracemonkey/build/autoconf/nspr.m4

@@ -0,0 +1,82 @@
+# -*- tab-width: 4; -*-
+# Configure paths for NSPR
+# Public domain - Chris Seawood <cls@seawood.org> 2001-04-05
+# Based upon gtk.m4 (also PD) by Owen Taylor
+
+dnl AM_PATH_NSPR([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
+dnl Test for NSPR, and define NSPR_CFLAGS and NSPR_LIBS
+AC_DEFUN([AM_PATH_NSPR],
+[dnl
+
+AC_ARG_WITH(nspr-prefix,
+	[  --with-nspr-prefix=PFX  Prefix where NSPR is installed],
+	nspr_config_prefix="$withval",
+	nspr_config_prefix="")
+
+AC_ARG_WITH(nspr-exec-prefix,
+	[  --with-nspr-exec-prefix=PFX
+                          Exec prefix where NSPR is installed],
+	nspr_config_exec_prefix="$withval",
+	nspr_config_exec_prefix="")
+
+	if test -n "$nspr_config_exec_prefix"; then
+		nspr_config_args="$nspr_config_args --exec-prefix=$nspr_config_exec_prefix"
+		if test -z "$NSPR_CONFIG"; then
+			NSPR_CONFIG=$nspr_config_exec_prefix/bin/nspr-config
+		fi
+	fi
+	if test -n "$nspr_config_prefix"; then
+		nspr_config_args="$nspr_config_args --prefix=$nspr_config_prefix"
+		if test -z "$NSPR_CONFIG"; then
+			NSPR_CONFIG=$nspr_config_prefix/bin/nspr-config
+		fi
+	fi
+
+	unset ac_cv_path_NSPR_CONFIG
+	AC_PATH_PROG(NSPR_CONFIG, nspr-config, no)
+	min_nspr_version=ifelse([$1], ,4.0.0,$1)
+	AC_MSG_CHECKING(for NSPR - version >= $min_nspr_version)
+
+	no_nspr=""
+	if test "$NSPR_CONFIG" = "no"; then
+		no_nspr="yes"
+	else
+		NSPR_CFLAGS=`$NSPR_CONFIG $nspr_config_args --cflags`
+		NSPR_LIBS=`$NSPR_CONFIG $nspr_config_args --libs`
+
+		nspr_config_major_version=`$NSPR_CONFIG $nspr_config_args --version | \
+			sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+		nspr_config_minor_version=`$NSPR_CONFIG $nspr_config_args --version | \
+			sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+		nspr_config_micro_version=`$NSPR_CONFIG $nspr_config_args --version | \
+			sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+		min_nspr_major_version=`echo $min_nspr_version | \
+			sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+		min_nspr_minor_version=`echo $min_nspr_version | \
+			sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+		min_nspr_micro_version=`echo $min_nspr_version | \
+			sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+		if test "$nspr_config_major_version" -ne "$min_nspr_major_version"; then
+			no_nspr="yes"
+		elif test "$nspr_config_major_version" -eq "$min_nspr_major_version" &&
+		     test "$nspr_config_minor_version" -lt "$min_nspr_minor_version"; then
+			no_nspr="yes"
+		elif test "$nspr_config_major_version" -eq "$min_nspr_major_version" &&
+		     test "$nspr_config_minor_version" -eq "$min_nspr_minor_version" &&
+		     test "$nspr_config_micro_version" -lt "$min_nspr_micro_version"; then
+			no_nspr="yes"
+		fi
+	fi
+
+	if test -z "$no_nspr"; then
+		AC_MSG_RESULT(yes)
+		ifelse([$2], , :, [$2])     
+	else
+		AC_MSG_RESULT(no)
+	fi
+
+
+	AC_SUBST(NSPR_CFLAGS)
+	AC_SUBST(NSPR_LIBS)
+
+])

data/vendor/tracemonkey/build/autoconf/pkg.m4

@@ -0,0 +1,59 @@
+# PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not)
+# defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page
+# also defines GSTUFF_PKG_ERRORS on error
+AC_DEFUN([PKG_CHECK_MODULES],
+[succeeded=no
+
+  if test -z "$PKG_CONFIG"; then
+    AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
+  fi
+
+  if test "$PKG_CONFIG" = "no" ; then
+     echo "*** The pkg-config script could not be found. Make sure it is"
+     echo "*** in your path, or set the PKG_CONFIG environment variable"
+     echo "*** to the full path to pkg-config."
+     echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
+  else
+     PKG_CONFIG_MIN_VERSION=0.9.0
+     if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
+        AC_MSG_CHECKING(for $2)
+
+        if $PKG_CONFIG --exists "$2" ; then
+            AC_MSG_RESULT(yes)
+            succeeded=yes
+
+            AC_MSG_CHECKING($1_CFLAGS)
+            $1_CFLAGS=`$PKG_CONFIG --cflags "$2"`
+            AC_MSG_RESULT($$1_CFLAGS)
+
+            AC_MSG_CHECKING($1_LIBS)
+            ## Remove evil flags like -Wl,--export-dynamic
+            $1_LIBS="`$PKG_CONFIG --libs \"$2\" |sed s/-Wl,--export-dynamic//g`"
+            AC_MSG_RESULT($$1_LIBS)
+        else
+            $1_CFLAGS=""
+            $1_LIBS=""
+            ## If we have a custom action on failure, don't print errors, but 
+            ## do set a variable so people can do so.
+            $1_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
+            ifelse([$4], ,echo $$1_PKG_ERRORS,)
+        fi
+
+        AC_SUBST($1_CFLAGS)
+        AC_SUBST($1_LIBS)
+     else
+        echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
+        echo "*** See http://www.freedesktop.org/software/pkgconfig"
+     fi
+  fi
+
+  if test $succeeded = yes; then
+     ifelse([$3], , :, [$3])
+  else
+     if test "$COMPILE_ENVIRONMENT"; then 
+       ifelse([$4], , AC_MSG_ERROR([Library requirements ($2) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.]), [$4])
+     fi
+  fi
+])
+
+

data/vendor/tracemonkey/build/autoconf/update-makefile.sh

@@ -0,0 +1,118 @@
+#!/bin/sh
+#
+# ***** BEGIN LICENSE BLOCK *****
+# Version: MPL 1.1/GPL 2.0/LGPL 2.1
+#
+# The contents of this file are subject to the Mozilla Public License Version
+# 1.1 (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+# for the specific language governing rights and limitations under the
+# License.
+#
+# The Original Code is mozilla.org code.
+#
+# The Initial Developer of the Original Code is
+# Netscape Communications Corporation.
+# Portions created by the Initial Developer are Copyright (C) 1998
+# the Initial Developer. All Rights Reserved.
+#
+# Contributor(s):
+#
+# Alternatively, the contents of this file may be used under the terms of
+# either of the GNU General Public License Version 2 or later (the "GPL"),
+# or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+# in which case the provisions of the GPL or the LGPL are applicable instead
+# of those above. If you wish to allow use of your version of this file only
+# under the terms of either the GPL or the LGPL, and not to allow others to
+# use your version of this file under the terms of the MPL, indicate your
+# decision by deleting the provisions above and replace them with the notice
+# and other provisions required by the GPL or the LGPL. If you do not delete
+# the provisions above, a recipient may use your version of this file under
+# the terms of any one of the MPL, the GPL or the LGPL.
+#
+# ***** END LICENSE BLOCK *****
+
+#
+# This script will generate a single Makefile from a Makefile.in using
+# the config.status script.
+#
+# The config.status script is generated the first time you run 
+# ./configure.
+#
+#
+# Usage: update-makefile.sh
+#
+# Send comments, improvements, bugs to ramiro@netscape.com
+# 
+
+update_makefile_usage() {
+  _progname=`expr //$0 : '.*/\(.*\)'`
+  cat <<END_USAGE 2>&1
+
+Usage: $_progname [-h -u] [<keyword>]
+     -d <dir>     Subdir to update
+     -h           Print usage
+END_USAGE
+}
+
+# Parse the command-line options
+#
+subdir=
+while getopts d:h OPT; do
+    case $OPT in
+       d) # Make sure "subdir" has exactly one ending slash
+          subdir=`echo $OPTARG | sed 's/\/$//;'`"/" ;;
+    \?|h) update_makefile_usage
+          exit 1
+          ;;
+    esac
+done
+
+
+# find_depth: Pull the value of DEPTH out of Makefile (or Makefile.in)
+find_depth() {
+  egrep '^DEPTH[ 	]*=[ 	]*\.' $1 | awk -F= '{ print $2; }'
+}
+
+# The Makefile to create
+target_makefile=`pwd`"/${subdir}Makefile"
+
+# Use $(DEPTH) in the Makefile or Makefile.in to determine the depth
+if [ -f Makefile.in ]
+then
+    depth=`find_depth Makefile.in`
+elif [ -f Makefile ]
+then
+    depth=`find_depth Makefile`
+elif [ -f ../Makefile ]
+then
+    depth="../"`find_depth Makefile`
+else
+    echo
+    echo "There ain't no 'Makefile' or 'Makefile.in' over here: $pwd"
+    echo
+    exit
+fi
+
+# 'cd' to the root of the tree to run "config.status" there
+cd $depth
+
+# Strip the tree root off the Makefile's path
+#
+root_path=`pwd`
+target_makefile=`expr $target_makefile : $root_path'/\(.*\)'`
+
+# Make sure config.status exists
+#
+if [ -f config.status ]
+then
+    CONFIG_FILES=$target_makefile ./config.status
+else
+    echo
+    echo "There ain't no 'config.status' over here: $pwd"
+    echo
+fi

data/vendor/tracemonkey/build/cygwin-wrapper

@@ -0,0 +1,75 @@
+#!/bin/sh
+#
+# Stupid wrapper to avoid win32 dospath/cygdrive issues
+# Try not to spawn programs from within this file. If the stuff in here looks royally 
+# confusing, see bug: http://bugzilla.mozilla.org/show_bug.cgi?id=206643
+# and look at the older versions of this file that are easier to read, but
+# do basically the same thing
+#
+
+prog=$1
+shift
+if test -z "$prog"; then
+    exit 0
+fi
+
+# If $CYGDRIVE_MOUNT was not set in configure, give $mountpoint the results of mount -p
+mountpoint=$CYGDRIVE_MOUNT
+if test -z "$mountpoint"; then
+    mountpoint=`mount -p`
+    if test -z "$mountpoint"; then
+       print "Cannot determine cygwin mount points. Exiting"
+       exit 1
+    fi
+fi
+
+# Delete everything but "/cygdrive" (or other mountpoint) from mount=`mount -p`
+mountpoint=${mountpoint#*/}
+mountpoint=/${mountpoint%%[!A-Za-z0-9_]*}
+mountpoint=${mountpoint%/}
+
+args=""
+up=""
+if test "${prog}" = "-up"; then
+    up=1
+    prog=${1}
+    shift
+fi
+
+process=1
+
+# Convert the mountpoint in parameters to Win32 filenames
+# For instance: /cygdrive/c/foo -> c:/foo
+for i in "${@}"
+do
+    if test "${i}" = "-wrap"; then
+        process=1
+    else
+        if test "${i}" = "-nowrap"; then
+            process=
+        else
+            if test -n "${process}"; then
+                if test -n "${up}"; then
+                    pathname=${i#-I[a-zA-Z]:/}
+                    if ! test "${pathname}" = "${i}"; then
+                        no_i=${i#-I}
+                        driveletter=${no_i%%:*}
+                        i=-I${mountpoint}/${driveletter}/${pathname}
+                    fi
+                else
+                    eval 'leader=${i%%'${mountpoint}'/[a-zA-Z]/*}'
+                    if ! test "${leader}" = "${i}"; then
+                        eval 'pathname=${i#'${leader}${mountpoint}'/[a-zA-Z]/}'
+                        eval 'no_mountpoint=${i#'${leader}${mountpoint}'/}'
+                        driveletter=${no_mountpoint%%/*}
+                        i=${leader}${driveletter}:/${pathname}
+                    fi
+                fi
+            fi
+
+            args="${args} ${i}"
+        fi
+    fi
+done
+
+exec $prog $args