javonet-ruby-sdk 2.4.9 → 2.4.11

data/lib/javonet-ruby-sdk/Binaries/Perl/MacOs/X64/deps/lib/perl5/Sub/Exporter.pm

@@ -1,1769 +0,0 @@
-use v5.12.0;
-use warnings;
-package Sub::Exporter 0.991;
-# ABSTRACT: a sophisticated exporter for custom-built routines
-
-use Carp ();
-use Data::OptList 0.100 ();
-use Params::Util 0.14 (); # _CODELIKE
-use Sub::Install 0.92 ();
-
-#pod =head1 SYNOPSIS
-#pod
-#pod Sub::Exporter must be used in two places.  First, in an exporting module:
-#pod
-#pod   # in the exporting module:
-#pod   package Text::Tweaker;
-#pod   use Sub::Exporter -setup => {
-#pod     exports => [
-#pod       qw(squish titlecase), # always works the same way
-#pod       reformat => \&build_reformatter, # generator to build exported function
-#pod       trim     => \&build_trimmer,
-#pod       indent   => \&build_indenter,
-#pod     ],
-#pod     collectors => [ 'defaults' ],
-#pod   };
-#pod
-#pod Then, in an importing module:
-#pod
-#pod   # in the importing module:
-#pod   use Text::Tweaker
-#pod     'squish',
-#pod     indent   => { margin => 5 },
-#pod     reformat => { width => 79, justify => 'full', -as => 'prettify_text' },
-#pod     defaults => { eol => 'CRLF' };
-#pod
-#pod With this setup, the importing module ends up with three routines: C<squish>,
-#pod C<indent>, and C<prettify_text>.  The latter two have been built to the
-#pod specifications of the importer -- they are not just copies of the code in the
-#pod exporting package.
-#pod
-#pod =head1 DESCRIPTION
-#pod
-#pod B<ACHTUNG!>  If you're not familiar with Exporter or exporting, read
-#pod L<Sub::Exporter::Tutorial> first!
-#pod
-#pod =head2 Why Generators?
-#pod
-#pod The biggest benefit of Sub::Exporter over existing exporters (including the
-#pod ubiquitous Exporter.pm) is its ability to build new coderefs for export, rather
-#pod than to simply export code identical to that found in the exporting package.
-#pod
-#pod If your module's consumers get a routine that works like this:
-#pod
-#pod   use Data::Analyze qw(analyze);
-#pod   my $value = analyze($data, $tolerance, $passes);
-#pod
-#pod and they constantly pass only one or two different set of values for the
-#pod non-C<$data> arguments, your code can benefit from Sub::Exporter.  By writing a
-#pod simple generator, you can let them do this, instead:
-#pod
-#pod   use Data::Analyze
-#pod     analyze => { tolerance => 0.10, passes => 10, -as => analyze10 },
-#pod     analyze => { tolerance => 0.15, passes => 50, -as => analyze50 };
-#pod
-#pod   my $value = analyze10($data);
-#pod
-#pod The package with the generator for that would look something like this:
-#pod
-#pod   package Data::Analyze;
-#pod   use Sub::Exporter -setup => {
-#pod     exports => [
-#pod       analyze => \&build_analyzer,
-#pod     ],
-#pod   };
-#pod
-#pod   sub build_analyzer {
-#pod     my ($class, $name, $arg) = @_;
-#pod
-#pod     return sub {
-#pod       my $data      = shift;
-#pod       my $tolerance = shift || $arg->{tolerance};
-#pod       my $passes    = shift || $arg->{passes};
-#pod
-#pod       analyze($data, $tolerance, $passes);
-#pod     }
-#pod   }
-#pod
-#pod Your module's user now has to do less work to benefit from it -- and remember,
-#pod you're often your own user!  Investing in customized subroutines is an
-#pod investment in future laziness.
-#pod
-#pod This also avoids a common form of ugliness seen in many modules: package-level
-#pod configuration.  That is, you might have seen something like the above
-#pod implemented like so:
-#pod
-#pod   use Data::Analyze qw(analyze);
-#pod   $Data::Analyze::default_tolerance = 0.10;
-#pod   $Data::Analyze::default_passes    = 10;
-#pod
-#pod This might save time, until you have multiple modules using Data::Analyze.
-#pod Because there is only one global configuration, they step on each other's toes
-#pod and your code begins to have mysterious errors.
-#pod
-#pod Generators can also allow you to export class methods to be called as
-#pod subroutines:
-#pod
-#pod   package Data::Methodical;
-#pod   use Sub::Exporter -setup => { exports => { some_method => \&_curry_class } };
-#pod
-#pod   sub _curry_class {
-#pod     my ($class, $name) = @_;
-#pod     sub { $class->$name(@_); };
-#pod   }
-#pod
-#pod Because of the way that exporters and Sub::Exporter work, any package that
-#pod inherits from Data::Methodical can inherit its exporter and override its
-#pod C<some_method>.  If a user imports C<some_method> from that package, he'll
-#pod receive a subroutine that calls the method on the subclass, rather than on
-#pod Data::Methodical itself.  Keep in mind that if you re-setup Sub::Exporter in a
-#pod package that inherits from Data::Methodical you will, of course, be entirely
-#pod replacing the exporter from Data::Methodical.  C<import> is a method, and is
-#pod hidden by the same means as any other method.
-#pod
-#pod =head2 Other Customizations
-#pod
-#pod Building custom routines with generators isn't the only way that Sub::Exporters
-#pod allows the importing code to refine its use of the exported routines.  They may
-#pod also be renamed to avoid naming collisions.
-#pod
-#pod Consider the following code:
-#pod
-#pod   # this program determines to which circle of Hell you will be condemned
-#pod   use Morality qw(sin virtue); # for calculating viciousness
-#pod   use Math::Trig qw(:all);     # for dealing with circles
-#pod
-#pod The programmer has inadvertently imported two C<sin> routines.  The solution,
-#pod in Exporter.pm-based modules, would be to import only one and then call the
-#pod other by its fully-qualified name.  Alternately, the importer could write a
-#pod routine that did so, or could mess about with typeglobs.
-#pod
-#pod How much easier to write:
-#pod
-#pod   # this program determines to which circle of Hell you will be condemned
-#pod   use Morality qw(virtue), sin => { -as => 'offense' };
-#pod   use Math::Trig -all => { -prefix => 'trig_' };
-#pod
-#pod and to have at one's disposal C<offense> and C<trig_sin> -- not to mention
-#pod C<trig_cos> and C<trig_tan>.
-#pod
-#pod =head1 EXPORTER CONFIGURATION
-#pod
-#pod You can configure an exporter for your package by using Sub::Exporter like so:
-#pod
-#pod   package Tools;
-#pod   use Sub::Exporter
-#pod     -setup => { exports => [ qw(function1 function2 function3) ] };
-#pod
-#pod This is the simplest way to use the exporter, and is basically equivalent to
-#pod this:
-#pod
-#pod   package Tools;
-#pod   use base qw(Exporter);
-#pod   our @EXPORT_OK = qw(function1 function2 function3);
-#pod
-#pod Any basic use of Sub::Exporter will look like this:
-#pod
-#pod   package Tools;
-#pod   use Sub::Exporter -setup => \%config;
-#pod
-#pod The following keys are valid in C<%config>:
-#pod
-#pod   exports - a list of routines to provide for exporting; each routine may be
-#pod             followed by generator
-#pod   groups  - a list of groups to provide for exporting; each must be followed by
-#pod             either (a) a list of exports, possibly with arguments for each
-#pod             export, or (b) a generator
-#pod
-#pod   collectors - a list of names into which values are collected for use in
-#pod                routine generation; each name may be followed by a validator
-#pod
-#pod In addition to the basic options above, a few more advanced options may be
-#pod passed:
-#pod
-#pod   into_level - how far up the caller stack to look for a target (default 0)
-#pod   into       - an explicit target (package) into which to export routines
-#pod
-#pod In other words: Sub::Exporter installs a C<import> routine which, when called,
-#pod exports routines to the calling namespace.  The C<into> and C<into_level>
-#pod options change where those exported routines are installed.
-#pod
-#pod   generator  - a callback used to produce the code that will be installed
-#pod                default: Sub::Exporter::default_generator
-#pod
-#pod   installer  - a callback used to install the code produced by the generator
-#pod                default: Sub::Exporter::default_installer
-#pod
-#pod For information on how these callbacks are used, see the documentation for
-#pod C<L</default_generator>> and C<L</default_installer>>.
-#pod
-#pod =head2 Export Configuration
-#pod
-#pod The C<exports> list may be provided as an array reference or a hash reference.
-#pod The list is processed in such a way that the following are equivalent:
-#pod
-#pod   { exports => [ qw(foo bar baz), quux => \&quux_generator ] }
-#pod
-#pod   { exports =>
-#pod     { foo => undef, bar => undef, baz => undef, quux => \&quux_generator } }
-#pod
-#pod Generators are code that return coderefs.  They are called with four
-#pod parameters:
-#pod
-#pod   $class - the class whose exporter has been called (the exporting class)
-#pod   $name  - the name of the export for which the routine is being build
-#pod  \%arg   - the arguments passed for this export
-#pod  \%col   - the collections for this import
-#pod
-#pod Given the configuration in the L</SYNOPSIS>, the following C<use> statement:
-#pod
-#pod   use Text::Tweaker
-#pod     reformat => { -as => 'make_narrow', width => 33 },
-#pod     defaults => { eol => 'CR' };
-#pod
-#pod would result in the following call to C<&build_reformatter>:
-#pod
-#pod   my $code = build_reformatter(
-#pod     'Text::Tweaker',
-#pod     'reformat',
-#pod     { width => 33 }, # note that -as is not passed in
-#pod     { defaults => { eol => 'CR' } },
-#pod   );
-#pod
-#pod The returned coderef (C<$code>) would then be installed as C<make_narrow> in the
-#pod calling package.
-#pod
-#pod Instead of providing a coderef in the configuration, a reference to a method
-#pod name may be provided.  This method will then be called on the invocant of the
-#pod C<import> method.  (In this case, we do not pass the C<$class> parameter, as it
-#pod would be redundant.)
-#pod
-#pod =head2 Group Configuration
-#pod
-#pod The C<groups> list can be passed in the same forms as C<exports>.  Groups must
-#pod have values to be meaningful, which may either list exports that make up the
-#pod group (optionally with arguments) or may provide a way to build the group.
-#pod
-#pod The simpler case is the first: a group definition is a list of exports.  Here's
-#pod the example that could go in exporter in the L</SYNOPSIS>.
-#pod
-#pod   groups  => {
-#pod     default    => [ qw(reformat) ],
-#pod     shorteners => [ qw(squish trim) ],
-#pod     email_safe => [
-#pod       'indent',
-#pod       reformat => { -as => 'email_format', width => 72 }
-#pod     ],
-#pod   },
-#pod
-#pod Groups are imported by specifying their name prefixed be either a dash or a
-#pod colon.  This line of code would import the C<shorteners> group:
-#pod
-#pod   use Text::Tweaker qw(-shorteners);
-#pod
-#pod Arguments passed to a group when importing are merged into the groups options
-#pod and passed to any relevant generators.  Groups can contain other groups, but
-#pod looping group structures are ignored.
-#pod
-#pod The other possible value for a group definition, a coderef, allows one
-#pod generator to build several exportable routines simultaneously.  This is useful
-#pod when many routines must share enclosed lexical variables.  The coderef must
-#pod return a hash reference.  The keys will be used as export names and the values
-#pod are the subs that will be exported.
-#pod
-#pod This example shows a simple use of the group generator.
-#pod
-#pod   package Data::Crypto;
-#pod   use Sub::Exporter -setup => { groups => { cipher => \&build_cipher_group } };
-#pod
-#pod   sub build_cipher_group {
-#pod     my ($class, $group, $arg) = @_;
-#pod     my ($encode, $decode) = build_codec($arg->{secret});
-#pod     return { cipher => $encode, decipher => $decode };
-#pod   }
-#pod
-#pod The C<cipher> and C<decipher> routines are built in a group because they are
-#pod built together by code which encloses their secret in their environment.
-#pod
-#pod =head3 Default Groups
-#pod
-#pod If a module that uses Sub::Exporter is C<use>d with no arguments, it will try
-#pod to export the group named C<default>.  If that group has not been specifically
-#pod configured, it will be empty, and nothing will happen.
-#pod
-#pod Another group is also created if not defined: C<all>.  The C<all> group
-#pod contains all the exports from the exports list.
-#pod
-#pod =head2 Collector Configuration
-#pod
-#pod The C<collectors> entry in the exporter configuration gives names which, when
-#pod found in the import call, have their values collected and passed to every
-#pod generator.
-#pod
-#pod For example, the C<build_analyzer> generator that we saw above could be
-#pod rewritten as:
-#pod
-#pod  sub build_analyzer {
-#pod    my ($class, $name, $arg, $col) = @_;
-#pod
-#pod    return sub {
-#pod      my $data      = shift;
-#pod      my $tolerance = shift || $arg->{tolerance} || $col->{defaults}{tolerance};
-#pod      my $passes    = shift || $arg->{passes}    || $col->{defaults}{passes};
-#pod
-#pod      analyze($data, $tolerance, $passes);
-#pod    }
-#pod  }
-#pod
-#pod That would allow the importer to specify global defaults for his imports:
-#pod
-#pod   use Data::Analyze
-#pod     'analyze',
-#pod     analyze  => { tolerance => 0.10, -as => analyze10 },
-#pod     analyze  => { tolerance => 0.15, passes => 50, -as => analyze50 },
-#pod     defaults => { passes => 10 };
-#pod
-#pod   my $A = analyze10($data);     # equivalent to analyze($data, 0.10, 10);
-#pod   my $C = analyze50($data);     # equivalent to analyze($data, 0.15, 50);
-#pod   my $B = analyze($data, 0.20); # equivalent to analyze($data, 0.20, 10);
-#pod
-#pod If values are provided in the C<collectors> list during exporter setup, they
-#pod must be code references, and are used to validate the importer's values.  The
-#pod validator is called when the collection is found, and if it returns false, an
-#pod exception is thrown.  We could ensure that no one tries to set a global data
-#pod default easily:
-#pod
-#pod   collectors => { defaults => sub { return (exists $_[0]->{data}) ? 0 : 1 } }
-#pod
-#pod Collector coderefs can also be used as hooks to perform arbitrary actions
-#pod before anything is exported.
-#pod
-#pod When the coderef is called, it is passed the value of the collection and a
-#pod hashref containing the following entries:
-#pod
-#pod   name        - the name of the collector
-#pod   config      - the exporter configuration (hashref)
-#pod   import_args - the arguments passed to the exporter, sans collections (aref)
-#pod   class       - the package on which the importer was called
-#pod   into        - the package into which exports will be exported
-#pod
-#pod Collectors with all-caps names (that is, made up of underscore or capital A
-#pod through Z) are reserved for special use.  The only currently implemented
-#pod special collector is C<INIT>, whose hook (if present in the exporter
-#pod configuration) is always run before any other hook.
-#pod
-#pod =head1 CALLING THE EXPORTER
-#pod
-#pod Arguments to the exporter (that is, the arguments after the module name in a
-#pod C<use> statement) are parsed as follows:
-#pod
-#pod First, the collectors gather any collections found in the arguments.  Any
-#pod reference type may be given as the value for a collector.  For each collection
-#pod given in the arguments, its validator (if any) is called.
-#pod
-#pod Next, groups are expanded.  If the group is implemented by a group generator,
-#pod the generator is called.  There are two special arguments which, if given to a
-#pod group, have special meaning:
-#pod
-#pod   -prefix - a string to prepend to any export imported from this group
-#pod   -suffix - a string to append to any export imported from this group
-#pod
-#pod Finally, individual export generators are called and all subs, generated or
-#pod otherwise, are installed in the calling package.  There is only one special
-#pod argument for export generators:
-#pod
-#pod   -as     - where to install the exported sub
-#pod
-#pod Normally, C<-as> will contain an alternate name for the routine.  It may,
-#pod however, contain a reference to a scalar.  If that is the case, a reference the
-#pod generated routine will be placed in the scalar referenced by C<-as>.  It will
-#pod not be installed into the calling package.
-#pod
-#pod =head2 Special Exporter Arguments
-#pod
-#pod The generated exporter accept some special options, which may be passed as the
-#pod first argument, in a hashref.
-#pod
-#pod These options are:
-#pod
-#pod   into_level
-#pod   into
-#pod   generator
-#pod   installer
-#pod
-#pod These override the same-named configuration options described in L</EXPORTER
-#pod CONFIGURATION>.
-#pod
-#pod =cut
-
-# Given a potential import name, this returns the group name -- if it's got a
-# group prefix.
-sub _group_name {
-  my ($name) = @_;
-
-  return if (index q{-:}, (substr $name, 0, 1)) == -1;
-  return substr $name, 1;
-}
-
-# \@groups is a canonicalized opt list of exports and groups this returns
-# another canonicalized opt list with groups replaced with relevant exports.
-# \%seen is groups we've already expanded and can ignore.
-# \%merge is merged options from the group we're descending through.
-sub _expand_groups {
-  my ($class, $config, $groups, $collection, $seen, $merge) = @_;
-  $seen  ||= {};
-  $merge ||= {};
-  my @groups = @$groups;
-
-  for my $i (reverse 0 .. $#groups) {
-    if (my $group_name = _group_name($groups[$i][0])) {
-      my $seen = { %$seen }; # faux-dynamic scoping
-
-      splice @groups, $i, 1,
-        _expand_group($class, $config, $groups[$i], $collection, $seen, $merge);
-    } else {
-      # there's nothing to munge in this export's args
-      next unless my %merge = %$merge;
-
-      # we have things to merge in; do so
-      my $prefix = (delete $merge{-prefix}) || '';
-      my $suffix = (delete $merge{-suffix}) || '';
-
-      if (
-        Params::Util::_CODELIKE($groups[$i][1]) ## no critic Private
-        or
-        Params::Util::_SCALAR0($groups[$i][1]) ## no critic Private
-      ) {
-        # this entry was build by a group generator
-        $groups[$i][0] = $prefix . $groups[$i][0] . $suffix;
-      } else {
-        my $as
-          = ref $groups[$i][1]{-as} ? $groups[$i][1]{-as}
-          :     $groups[$i][1]{-as} ? $prefix . $groups[$i][1]{-as} . $suffix
-          :                           $prefix . $groups[$i][0]      . $suffix;
-
-        $groups[$i][1] = { %{ $groups[$i][1] }, %merge, -as => $as };
-      }
-    }
-  }
-
-  return \@groups;
-}
-
-# \@group is a name/value pair from an opt list.
-sub _expand_group {
-  my ($class, $config, $group, $collection, $seen, $merge) = @_;
-  $merge ||= {};
-
-  my ($group_name, $group_arg) = @$group;
-  $group_name = _group_name($group_name);
-
-  Carp::croak qq(group "$group_name" is not exported by the $class module)
-    unless exists $config->{groups}{$group_name};
-
-  return if $seen->{$group_name}++;
-
-  if (ref $group_arg) {
-    my $prefix = (delete $merge->{-prefix}||'') . ($group_arg->{-prefix}||'');
-    my $suffix = ($group_arg->{-suffix}||'') . (delete $merge->{-suffix}||'');
-    $merge = {
-      %$merge,
-      %$group_arg,
-      ($prefix ? (-prefix => $prefix) : ()),
-      ($suffix ? (-suffix => $suffix) : ()),
-    };
-  }
-
-  my $exports = $config->{groups}{$group_name};
-
-  if (
-    Params::Util::_CODELIKE($exports) ## no critic Private
-    or
-    Params::Util::_SCALAR0($exports) ## no critic Private
-  ) {
-    # I'm not very happy with this code for hiding -prefix and -suffix, but
-    # it's needed, and I'm not sure, offhand, how to make it better.
-    # -- rjbs, 2006-12-05
-    my $group_arg = $merge ? { %$merge } : {};
-    delete $group_arg->{-prefix};
-    delete $group_arg->{-suffix};
-
-    my $group = Params::Util::_CODELIKE($exports) ## no critic Private
-              ? $exports->($class, $group_name, $group_arg, $collection)
-              : $class->$$exports($group_name, $group_arg, $collection);
-
-    Carp::croak qq(group generator "$group_name" did not return a hashref)
-      if ref $group ne 'HASH';
-
-    my $stuff = [ map { [ $_ => $group->{$_} ] } keys %$group ];
-    return @{
-      _expand_groups($class, $config, $stuff, $collection, $seen, $merge)
-    };
-  } else {
-    $exports
-      = Data::OptList::mkopt($exports, "$group_name exports");
-
-    return @{
-      _expand_groups($class, $config, $exports, $collection, $seen, $merge)
-    };
-  }
-}
-
-sub _mk_collection_builder {
-  my ($col, $etc) = @_;
-  my ($config, $import_args, $class, $into) = @$etc;
-
-  my %seen;
-  sub {
-    my ($collection) = @_;
-    my ($name, $value) = @$collection;
-
-    Carp::croak "collection $name provided multiple times in import"
-      if $seen{ $name }++;
-
-    if (ref(my $hook = $config->{collectors}{$name})) {
-      my $arg = {
-        name        => $name,
-        config      => $config,
-        import_args => $import_args,
-        class       => $class,
-        into        => $into,
-      };
-
-      my $error_msg = "collection $name failed validation";
-      if (Params::Util::_SCALAR0($hook)) { ## no critic Private
-        Carp::croak $error_msg unless $class->$$hook($value, $arg);
-      } else {
-        Carp::croak $error_msg unless $hook->($value, $arg);
-      }
-    }
-
-    $col->{ $name } = $value;
-  }
-}
-
-# Given a config and pre-canonicalized importer args, remove collections from
-# the args and return them.
-sub _collect_collections {
-  my ($config, $import_args, $class, $into) = @_;
-
-  my @collections
-    = map  { splice @$import_args, $_, 1 }
-      grep { exists $config->{collectors}{ $import_args->[$_][0] } }
-      reverse 0 .. $#$import_args;
-
-  unshift @collections, [ INIT => {} ] if $config->{collectors}{INIT};
-
-  my $col = {};
-  my $builder = _mk_collection_builder($col, \@_);
-  for my $collection (@collections) {
-    $builder->($collection)
-  }
-
-  return $col;
-}
-
-#pod =head1 SUBROUTINES
-#pod
-#pod =head2 setup_exporter
-#pod
-#pod This routine builds and installs an C<import> routine.  It is called with one
-#pod argument, a hashref containing the exporter configuration.  Using this, it
-#pod builds an exporter and installs it into the calling package with the name
-#pod "import."  In addition to the normal exporter configuration, a few named
-#pod arguments may be passed in the hashref:
-#pod
-#pod   into       - into what package should the exporter be installed
-#pod   into_level - into what level up the stack should the exporter be installed
-#pod   as         - what name should the installed exporter be given
-#pod
-#pod By default the exporter is installed with the name C<import> into the immediate
-#pod caller of C<setup_exporter>.  In other words, if your package calls
-#pod C<setup_exporter> without providing any of the three above arguments, it will
-#pod have an C<import> routine installed.
-#pod
-#pod Providing both C<into> and C<into_level> will cause an exception to be thrown.
-#pod
-#pod The exporter is built by C<L</build_exporter>>.
-#pod
-#pod =cut
-
-sub setup_exporter {
-  my ($config)  = @_;
-
-  Carp::croak 'into and into_level may not both be supplied to exporter'
-    if exists $config->{into} and exists $config->{into_level};
-
-  my $as   = delete $config->{as}   || 'import';
-  my $into
-    = exists $config->{into}       ? delete $config->{into}
-    : exists $config->{into_level} ? caller(delete $config->{into_level})
-    :                                caller(0);
-
-  my $import = build_exporter($config);
-
-  Sub::Install::reinstall_sub({
-    code => $import,
-    into => $into,
-    as   => $as,
-  });
-}
-
-#pod =head2 build_exporter
-#pod
-#pod Given a standard exporter configuration, this routine builds and returns an
-#pod exporter -- that is, a subroutine that can be installed as a class method to
-#pod perform exporting on request.
-#pod
-#pod Usually, this method is called by C<L</setup_exporter>>, which then installs
-#pod the exporter as a package's import routine.
-#pod
-#pod =cut
-
-sub _key_intersection {
-  my ($x, $y) = @_;
-  my %seen = map { $_ => 1 } keys %$x;
-  my @names = grep { $seen{$_} } keys %$y;
-}
-
-# Given the config passed to setup_exporter, which contains sugary opt list
-# data, rewrite the opt lists into hashes, catch a few kinds of invalid
-# configurations, and set up defaults.  Since the config is a reference, it's
-# rewritten in place.
-my %valid_config_key;
-BEGIN {
-  %valid_config_key =
-    map { $_ => 1 }
-    qw(as collectors installer generator exports groups into into_level),
-    qw(exporter), # deprecated
-}
-
-sub _assert_collector_names_ok {
-  my ($collectors) = @_;
-
-  for my $reserved_name (grep { /\A[_A-Z]+\z/ } keys %$collectors) {
-    Carp::croak "unknown reserved collector name: $reserved_name"
-      if $reserved_name ne 'INIT';
-  }
-}
-
-sub _rewrite_build_config {
-  my ($config) = @_;
-
-  if (my @keys = grep { not exists $valid_config_key{$_} } keys %$config) {
-    Carp::croak "unknown options (@keys) passed to Sub::Exporter";
-  }
-
-  Carp::croak q(into and into_level may not both be supplied to exporter)
-    if exists $config->{into} and exists $config->{into_level};
-
-  # XXX: Remove after deprecation period.
-  if ($config->{exporter}) {
-    Carp::cluck "'exporter' argument to build_exporter is deprecated. Use 'installer' instead; the semantics are identical.";
-    $config->{installer} = delete $config->{exporter};
-  }
-
-  Carp::croak q(into and into_level may not both be supplied to exporter)
-    if exists $config->{into} and exists $config->{into_level};
-
-  for (qw(exports collectors)) {
-    $config->{$_} = Data::OptList::mkopt_hash(
-      $config->{$_},
-      $_,
-      [ 'CODE', 'SCALAR' ],
-    );
-  }
-
-  _assert_collector_names_ok($config->{collectors});
-
-  if (my @names = _key_intersection(@$config{qw(exports collectors)})) {
-    Carp::croak "names (@names) used in both collections and exports";
-  }
-
-  $config->{groups} = Data::OptList::mkopt_hash(
-      $config->{groups},
-      'groups',
-      [
-        'HASH',   # standard opt list
-        'ARRAY',  # standard opt list
-        'CODE',   # group generator
-        'SCALAR', # name of group generation method
-      ]
-    );
-
-  # by default, export nothing
-  $config->{groups}{default} ||= [];
-
-  # by default, build an all-inclusive 'all' group
-  $config->{groups}{all} ||= [ keys %{ $config->{exports} } ];
-
-  $config->{generator} ||= \&default_generator;
-  $config->{installer} ||= \&default_installer;
-}
-
-sub build_exporter {
-  my ($config) = @_;
-
-  _rewrite_build_config($config);
-
-  my $import = sub {
-    my ($class) = shift;
-
-    # XXX: clean this up -- rjbs, 2006-03-16
-    my $special = (ref $_[0]) ? shift(@_) : {};
-    Carp::croak q(into and into_level may not both be supplied to exporter)
-      if exists $special->{into} and exists $special->{into_level};
-
-    if ($special->{exporter}) {
-      Carp::cluck "'exporter' special import argument is deprecated. Use 'installer' instead; the semantics are identical.";
-      $special->{installer} = delete $special->{exporter};
-    }
-
-    my $into
-      = defined $special->{into}       ? delete $special->{into}
-      : defined $special->{into_level} ? caller(delete $special->{into_level})
-      : defined $config->{into}        ? $config->{into}
-      : defined $config->{into_level}  ? caller($config->{into_level})
-      :                                  caller(0);
-
-    my $generator = delete $special->{generator} || $config->{generator};
-    my $installer = delete $special->{installer} || $config->{installer};
-
-    # this builds a AOA, where the inner arrays are [ name => value_ref ]
-    my $import_args = Data::OptList::mkopt([ @_ ]);
-
-    # is this right?  defaults first or collectors first? -- rjbs, 2006-06-24
-    $import_args = [ [ -default => undef ] ] unless @$import_args;
-
-    my $collection = _collect_collections($config, $import_args, $class, $into);
-
-    my $to_import = _expand_groups($class, $config, $import_args, $collection);
-
-    # now, finally $import_arg is really the "to do" list
-    _do_import(
-      {
-        class     => $class,
-        col       => $collection,
-        config    => $config,
-        into      => $into,
-        generator => $generator,
-        installer => $installer,
-      },
-      $to_import,
-    );
-  };
-
-  return $import;
-}
-
-sub _do_import {
-  my ($arg, $to_import) = @_;
-
-  my @todo;
-
-  for my $pair (@$to_import) {
-    my ($name, $import_arg) = @$pair;
-
-    my ($generator, $as);
-
-    if ($import_arg and Params::Util::_CODELIKE($import_arg)) { ## no critic
-      # This is the case when a group generator has inserted name/code pairs.
-      $generator = sub { $import_arg };
-      $as = $name;
-    } else {
-      $import_arg = { $import_arg ? %$import_arg : () };
-
-      Carp::croak qq("$name" is not exported by the $arg->{class} module)
-        unless exists $arg->{config}{exports}{$name};
-
-      $generator = $arg->{config}{exports}{$name};
-
-      $as = exists $import_arg->{-as} ? (delete $import_arg->{-as}) : $name;
-    }
-
-    my $code = $arg->{generator}->(
-      {
-        class     => $arg->{class},
-        name      => $name,
-        arg       => $import_arg,
-        col       => $arg->{col},
-        generator => $generator,
-      }
-    );
-
-    push @todo, $as, $code;
-  }
-
-  $arg->{installer}->(
-    {
-      class => $arg->{class},
-      into  => $arg->{into},
-      col   => $arg->{col},
-    },
-    \@todo,
-  );
-}
-
-## Cute idea, possibly for future use: also supply an "unimport" for:
-## no Module::Whatever qw(arg arg arg);
-# sub _unexport {
-#   my (undef, undef, undef, undef, undef, $as, $into) = @_;
-#
-#   if (ref $as eq 'SCALAR') {
-#     undef $$as;
-#   } elsif (ref $as) {
-#     Carp::croak "invalid reference type for $as: " . ref $as;
-#   } else {
-#     no strict 'refs';
-#     delete &{$into . '::' . $as};
-#   }
-# }
-
-#pod =head2 default_generator
-#pod
-#pod This is Sub::Exporter's default generator.  It takes bits of configuration that
-#pod have been gathered during the import and turns them into a coderef that can be
-#pod installed.
-#pod
-#pod   my $code = default_generator(\%arg);
-#pod
-#pod Passed arguments are:
-#pod
-#pod   class - the class on which the import method was called
-#pod   name  - the name of the export being generated
-#pod   arg   - the arguments to the generator
-#pod   col   - the collections
-#pod
-#pod   generator - the generator to be used to build the export (code or scalar ref)
-#pod
-#pod =cut
-
-sub default_generator {
-  my ($arg) = @_;
-  my ($class, $name, $generator) = @$arg{qw(class name generator)};
-
-  if (not defined $generator) {
-    my $code = $class->can($name)
-      or Carp::croak "can't locate exported subroutine $name via $class";
-    return $code;
-  }
-
-  # I considered making this "$class->$generator(" but it seems that
-  # overloading precedence would turn an overloaded-as-code generator object
-  # into a string before code. -- rjbs, 2006-06-11
-  return $generator->($class, $name, $arg->{arg}, $arg->{col})
-    if Params::Util::_CODELIKE($generator); ## no critic Private
-
-  # This "must" be a scalar reference, to a generator method name.
-  # -- rjbs, 2006-12-05
-  return $class->$$generator($name, $arg->{arg}, $arg->{col});
-}
-
-#pod =head2 default_installer
-#pod
-#pod This is Sub::Exporter's default installer.  It does what Sub::Exporter
-#pod promises: it installs code into the target package.
-#pod
-#pod   default_installer(\%arg, \@to_export);
-#pod
-#pod Passed arguments are:
-#pod
-#pod   into - the package into which exports should be delivered
-#pod
-#pod C<@to_export> is a list of name/value pairs.  The default exporter assigns code
-#pod (the values) to named slots (the names) in the given package.  If the name is a
-#pod scalar reference, the scalar reference is made to point to the code reference
-#pod instead.
-#pod
-#pod =cut
-
-sub default_installer {
-  my ($arg, $to_export) = @_;
-
-  for (my $i = 0; $i < @$to_export; $i += 2) {
-    my ($as, $code) = @$to_export[ $i, $i+1 ];
-
-    # Allow as isa ARRAY to push onto an array?
-    # Allow into isa HASH to install name=>code into hash?
-
-    if (ref $as eq 'SCALAR') {
-      $$as = $code;
-    } elsif (ref $as) {
-      Carp::croak "invalid reference type for $as: " . ref $as;
-    } else {
-      Sub::Install::reinstall_sub({
-        code => $code,
-        into => $arg->{into},
-        as   => $as
-      });
-    }
-  }
-}
-
-sub default_exporter {
-  Carp::cluck "default_exporter is deprecated; call default_installer instead; the semantics are identical";
-  goto &default_installer;
-}
-
-#pod =head1 EXPORTS
-#pod
-#pod Sub::Exporter also offers its own exports: the C<setup_exporter> and
-#pod C<build_exporter> routines described above.  It also provides a special "setup"
-#pod collector, which will set up an exporter using the parameters passed to it.
-#pod
-#pod Note that the "setup" collector (seen in examples like the L</SYNOPSIS> above)
-#pod uses C<build_exporter>, not C<setup_exporter>.  This means that the special
-#pod arguments like "into" and "as" for C<setup_exporter> are not accepted here.
-#pod Instead, you may write something like:
-#pod
-#pod   use Sub::Exporter
-#pod     { into => 'Target::Package' },
-#pod     -setup => {
-#pod       -as     => 'do_import',
-#pod       exports => [ ... ],
-#pod     }
-#pod   ;
-#pod
-#pod Finding a good reason for wanting to do this is left as an exercise for the
-#pod reader.
-#pod
-#pod =cut
-
-setup_exporter({
-  exports => [
-    qw(setup_exporter build_exporter),
-    _import => sub { build_exporter($_[2]) },
-  ],
-  groups  => {
-    all   => [ qw(setup_exporter build_export) ],
-  },
-  collectors => { -setup => \&_setup },
-});
-
-sub _setup {
-  my ($value, $arg) = @_;
-
-  if (ref $value eq 'HASH') {
-    push @{ $arg->{import_args} }, [ _import => { -as => 'import', %$value } ];
-    return 1;
-  } elsif (ref $value eq 'ARRAY') {
-    push @{ $arg->{import_args} },
-      [ _import => { -as => 'import', exports => $value } ];
-    return 1;
-  }
-  return;
-}
-
-#pod =head1 COMPARISONS
-#pod
-#pod There are a whole mess of exporters on the CPAN.  The features included in
-#pod Sub::Exporter set it apart from any existing Exporter.  Here's a summary of
-#pod some other exporters and how they compare.
-#pod
-#pod =over
-#pod
-#pod =item * L<Exporter> and co.
-#pod
-#pod This is the standard Perl exporter.  Its interface is a little clunky, but it's
-#pod fast and ubiquitous.  It can do some things that Sub::Exporter can't:  it can
-#pod export things other than routines, it can import "everything in this group
-#pod except this symbol," and some other more esoteric things.  These features seem
-#pod to go nearly entirely unused.
-#pod
-#pod It always exports things exactly as they appear in the exporting module; it
-#pod can't rename or customize routines.  Its groups ("tags") can't be nested.
-#pod
-#pod L<Exporter::Lite> is a whole lot like Exporter, but it does significantly less:
-#pod it supports exporting symbols, but not groups, pattern matching, or negation.
-#pod
-#pod The fact that Sub::Exporter can't export symbols other than subroutines is
-#pod a good idea, not a missing feature.
-#pod
-#pod For simple uses, setting up Sub::Exporter is about as easy as Exporter.  For
-#pod complex uses, Sub::Exporter makes hard things possible, which would not be
-#pod possible with Exporter.
-#pod
-#pod When using a module that uses Sub::Exporter, users familiar with Exporter will
-#pod probably see no difference in the basics.  These two lines do about the same
-#pod thing in whether the exporting module uses Exporter or Sub::Exporter.
-#pod
-#pod   use Some::Module qw(foo bar baz);
-#pod   use Some::Module qw(foo :bar baz);
-#pod
-#pod The definition for exporting in Exporter.pm might look like this:
-#pod
-#pod   package Some::Module;
-#pod   use base qw(Exporter);
-#pod   our @EXPORT_OK   = qw(foo bar baz quux);
-#pod   our %EXPORT_TAGS = (bar => [ qw(bar baz) ]);
-#pod
-#pod Using Sub::Exporter, it would look like this:
-#pod
-#pod   package Some::Module;
-#pod   use Sub::Exporter -setup => {
-#pod     exports => [ qw(foo bar baz quux) ],
-#pod     groups  => { bar => [ qw(bar baz) ]}
-#pod   };
-#pod
-#pod Sub::Exporter respects inheritance, so that a package may export inherited
-#pod routines, and will export the most inherited version.  Exporting methods
-#pod without currying away the invocant is a bad idea, but Sub::Exporter allows you
-#pod to do just that -- and anyway, there are other uses for this feature, like
-#pod packages of exported subroutines which use inheritance specifically to allow
-#pod more specialized, but similar, packages.
-#pod
-#pod L<Exporter::Easy> provides a wrapper around the standard Exporter.  It makes it
-#pod simpler to build groups, but doesn't provide any more functionality.  Because
-#pod it is a front-end to Exporter, it will store your exporter's configuration in
-#pod global package variables.
-#pod
-#pod =item * Attribute-Based Exporters
-#pod
-#pod Some exporters use attributes to mark variables to export.  L<Exporter::Simple>
-#pod supports exporting any kind of symbol, and supports groups.  Using a module
-#pod like Exporter or Sub::Exporter, it's easy to look at one place and see what is
-#pod exported, but it's impossible to look at a variable definition and see whether
-#pod it is exported by that alone.  Exporter::Simple makes this trade in reverse:
-#pod each variable's declaration includes its export definition, but there is no one
-#pod place to look to find a manifest of exports.
-#pod
-#pod More importantly, Exporter::Simple does not add any new features to those of
-#pod Exporter.  In fact, like Exporter::Easy, it is just a front-end to Exporter, so
-#pod it ends up storing its configuration in global package variables.  (This means
-#pod that there is one place to look for your exporter's manifest, actually.  You
-#pod can inspect the C<@EXPORT> package variables, and other related package
-#pod variables, at runtime.)
-#pod
-#pod L<Perl6::Export> isn't actually attribute based, but looks similar.  Its syntax
-#pod is borrowed from Perl 6, and implemented by a source filter.  It is a prototype
-#pod of an interface that is still being designed.  It should probably be avoided
-#pod for production work.  On the other hand, L<Perl6::Export::Attrs> implements
-#pod Perl 6-like exporting, but translates it into Perl 5 by providing attributes.
-#pod
-#pod =item * Other Exporters
-#pod
-#pod L<Exporter::Renaming> wraps the standard Exporter to allow it to export symbols
-#pod with changed names.
-#pod
-#pod L<Class::Exporter> performs a special kind of routine generation, giving each
-#pod importing package an instance of your class, and then exporting the instance's
-#pod methods as normal routines.  (Sub::Exporter, of course, can easily emulate this
-#pod behavior, as shown above.)
-#pod
-#pod L<Exporter::Tidy> implements a form of renaming (using its C<_map> argument)
-#pod and of prefixing, and implements groups.  It also avoids using package
-#pod variables for its configuration.
-#pod
-#pod =back
-#pod
-#pod =head1 TODO
-#pod
-#pod =cut
-
-#pod =over
-#pod
-#pod =item * write a set of longer, more demonstrative examples
-#pod
-#pod =item * solidify the "custom exporter" interface (see C<&default_exporter>)
-#pod
-#pod =item * add an "always" group
-#pod
-#pod =back
-#pod
-#pod =head1 THANKS
-#pod
-#pod Hans Dieter Pearcey provided helpful advice while I was writing Sub::Exporter.
-#pod Ian Langworth and Shawn Sorichetti asked some good questions and helped me
-#pod improve my documentation quite a bit.  Yuval Kogman helped me find a bunch of
-#pod little problems.
-#pod
-#pod Thanks, friends!
-#pod
-#pod =head1 BUGS
-#pod
-#pod Please report any bugs or feature requests through the web interface at
-#pod L<http://rt.cpan.org>. I will be notified, and then you'll automatically be
-#pod notified of progress on your bug as I make changes.
-#pod
-#pod =cut
-
-"jn8:32"; # <-- magic true value
-
-__END__
-
-=pod
-
-=encoding UTF-8
-
-=head1 NAME
-
-Sub::Exporter - a sophisticated exporter for custom-built routines
-
-=head1 VERSION
-
-version 0.991
-
-=head1 SYNOPSIS
-
-Sub::Exporter must be used in two places.  First, in an exporting module:
-
-  # in the exporting module:
-  package Text::Tweaker;
-  use Sub::Exporter -setup => {
-    exports => [
-      qw(squish titlecase), # always works the same way
-      reformat => \&build_reformatter, # generator to build exported function
-      trim     => \&build_trimmer,
-      indent   => \&build_indenter,
-    ],
-    collectors => [ 'defaults' ],
-  };
-
-Then, in an importing module:
-
-  # in the importing module:
-  use Text::Tweaker
-    'squish',
-    indent   => { margin => 5 },
-    reformat => { width => 79, justify => 'full', -as => 'prettify_text' },
-    defaults => { eol => 'CRLF' };
-
-With this setup, the importing module ends up with three routines: C<squish>,
-C<indent>, and C<prettify_text>.  The latter two have been built to the
-specifications of the importer -- they are not just copies of the code in the
-exporting package.
-
-=head1 DESCRIPTION
-
-B<ACHTUNG!>  If you're not familiar with Exporter or exporting, read
-L<Sub::Exporter::Tutorial> first!
-
-=head2 Why Generators?
-
-The biggest benefit of Sub::Exporter over existing exporters (including the
-ubiquitous Exporter.pm) is its ability to build new coderefs for export, rather
-than to simply export code identical to that found in the exporting package.
-
-If your module's consumers get a routine that works like this:
-
-  use Data::Analyze qw(analyze);
-  my $value = analyze($data, $tolerance, $passes);
-
-and they constantly pass only one or two different set of values for the
-non-C<$data> arguments, your code can benefit from Sub::Exporter.  By writing a
-simple generator, you can let them do this, instead:
-
-  use Data::Analyze
-    analyze => { tolerance => 0.10, passes => 10, -as => analyze10 },
-    analyze => { tolerance => 0.15, passes => 50, -as => analyze50 };
-
-  my $value = analyze10($data);
-
-The package with the generator for that would look something like this:
-
-  package Data::Analyze;
-  use Sub::Exporter -setup => {
-    exports => [
-      analyze => \&build_analyzer,
-    ],
-  };
-
-  sub build_analyzer {
-    my ($class, $name, $arg) = @_;
-
-    return sub {
-      my $data      = shift;
-      my $tolerance = shift || $arg->{tolerance};
-      my $passes    = shift || $arg->{passes};
-
-      analyze($data, $tolerance, $passes);
-    }
-  }
-
-Your module's user now has to do less work to benefit from it -- and remember,
-you're often your own user!  Investing in customized subroutines is an
-investment in future laziness.
-
-This also avoids a common form of ugliness seen in many modules: package-level
-configuration.  That is, you might have seen something like the above
-implemented like so:
-
-  use Data::Analyze qw(analyze);
-  $Data::Analyze::default_tolerance = 0.10;
-  $Data::Analyze::default_passes    = 10;
-
-This might save time, until you have multiple modules using Data::Analyze.
-Because there is only one global configuration, they step on each other's toes
-and your code begins to have mysterious errors.
-
-Generators can also allow you to export class methods to be called as
-subroutines:
-
-  package Data::Methodical;
-  use Sub::Exporter -setup => { exports => { some_method => \&_curry_class } };
-
-  sub _curry_class {
-    my ($class, $name) = @_;
-    sub { $class->$name(@_); };
-  }
-
-Because of the way that exporters and Sub::Exporter work, any package that
-inherits from Data::Methodical can inherit its exporter and override its
-C<some_method>.  If a user imports C<some_method> from that package, he'll
-receive a subroutine that calls the method on the subclass, rather than on
-Data::Methodical itself.  Keep in mind that if you re-setup Sub::Exporter in a
-package that inherits from Data::Methodical you will, of course, be entirely
-replacing the exporter from Data::Methodical.  C<import> is a method, and is
-hidden by the same means as any other method.
-
-=head2 Other Customizations
-
-Building custom routines with generators isn't the only way that Sub::Exporters
-allows the importing code to refine its use of the exported routines.  They may
-also be renamed to avoid naming collisions.
-
-Consider the following code:
-
-  # this program determines to which circle of Hell you will be condemned
-  use Morality qw(sin virtue); # for calculating viciousness
-  use Math::Trig qw(:all);     # for dealing with circles
-
-The programmer has inadvertently imported two C<sin> routines.  The solution,
-in Exporter.pm-based modules, would be to import only one and then call the
-other by its fully-qualified name.  Alternately, the importer could write a
-routine that did so, or could mess about with typeglobs.
-
-How much easier to write:
-
-  # this program determines to which circle of Hell you will be condemned
-  use Morality qw(virtue), sin => { -as => 'offense' };
-  use Math::Trig -all => { -prefix => 'trig_' };
-
-and to have at one's disposal C<offense> and C<trig_sin> -- not to mention
-C<trig_cos> and C<trig_tan>.
-
-=head1 PERL VERSION
-
-This library should run on perls released even a long time ago.  It should
-work on any version of perl released in the last five years.
-
-Although it may work on older versions of perl, no guarantee is made that the
-minimum required version will not be increased.  The version may be increased
-for any reason, and there is no promise that patches will be accepted to
-lower the minimum required perl.
-
-=head1 EXPORTER CONFIGURATION
-
-You can configure an exporter for your package by using Sub::Exporter like so:
-
-  package Tools;
-  use Sub::Exporter
-    -setup => { exports => [ qw(function1 function2 function3) ] };
-
-This is the simplest way to use the exporter, and is basically equivalent to
-this:
-
-  package Tools;
-  use base qw(Exporter);
-  our @EXPORT_OK = qw(function1 function2 function3);
-
-Any basic use of Sub::Exporter will look like this:
-
-  package Tools;
-  use Sub::Exporter -setup => \%config;
-
-The following keys are valid in C<%config>:
-
-  exports - a list of routines to provide for exporting; each routine may be
-            followed by generator
-  groups  - a list of groups to provide for exporting; each must be followed by
-            either (a) a list of exports, possibly with arguments for each
-            export, or (b) a generator
-
-  collectors - a list of names into which values are collected for use in
-               routine generation; each name may be followed by a validator
-
-In addition to the basic options above, a few more advanced options may be
-passed:
-
-  into_level - how far up the caller stack to look for a target (default 0)
-  into       - an explicit target (package) into which to export routines
-
-In other words: Sub::Exporter installs a C<import> routine which, when called,
-exports routines to the calling namespace.  The C<into> and C<into_level>
-options change where those exported routines are installed.
-
-  generator  - a callback used to produce the code that will be installed
-               default: Sub::Exporter::default_generator
-
-  installer  - a callback used to install the code produced by the generator
-               default: Sub::Exporter::default_installer
-
-For information on how these callbacks are used, see the documentation for
-C<L</default_generator>> and C<L</default_installer>>.
-
-=head2 Export Configuration
-
-The C<exports> list may be provided as an array reference or a hash reference.
-The list is processed in such a way that the following are equivalent:
-
-  { exports => [ qw(foo bar baz), quux => \&quux_generator ] }
-
-  { exports =>
-    { foo => undef, bar => undef, baz => undef, quux => \&quux_generator } }
-
-Generators are code that return coderefs.  They are called with four
-parameters:
-
-  $class - the class whose exporter has been called (the exporting class)
-  $name  - the name of the export for which the routine is being build
- \%arg   - the arguments passed for this export
- \%col   - the collections for this import
-
-Given the configuration in the L</SYNOPSIS>, the following C<use> statement:
-
-  use Text::Tweaker
-    reformat => { -as => 'make_narrow', width => 33 },
-    defaults => { eol => 'CR' };
-
-would result in the following call to C<&build_reformatter>:
-
-  my $code = build_reformatter(
-    'Text::Tweaker',
-    'reformat',
-    { width => 33 }, # note that -as is not passed in
-    { defaults => { eol => 'CR' } },
-  );
-
-The returned coderef (C<$code>) would then be installed as C<make_narrow> in the
-calling package.
-
-Instead of providing a coderef in the configuration, a reference to a method
-name may be provided.  This method will then be called on the invocant of the
-C<import> method.  (In this case, we do not pass the C<$class> parameter, as it
-would be redundant.)
-
-=head2 Group Configuration
-
-The C<groups> list can be passed in the same forms as C<exports>.  Groups must
-have values to be meaningful, which may either list exports that make up the
-group (optionally with arguments) or may provide a way to build the group.
-
-The simpler case is the first: a group definition is a list of exports.  Here's
-the example that could go in exporter in the L</SYNOPSIS>.
-
-  groups  => {
-    default    => [ qw(reformat) ],
-    shorteners => [ qw(squish trim) ],
-    email_safe => [
-      'indent',
-      reformat => { -as => 'email_format', width => 72 }
-    ],
-  },
-
-Groups are imported by specifying their name prefixed be either a dash or a
-colon.  This line of code would import the C<shorteners> group:
-
-  use Text::Tweaker qw(-shorteners);
-
-Arguments passed to a group when importing are merged into the groups options
-and passed to any relevant generators.  Groups can contain other groups, but
-looping group structures are ignored.
-
-The other possible value for a group definition, a coderef, allows one
-generator to build several exportable routines simultaneously.  This is useful
-when many routines must share enclosed lexical variables.  The coderef must
-return a hash reference.  The keys will be used as export names and the values
-are the subs that will be exported.
-
-This example shows a simple use of the group generator.
-
-  package Data::Crypto;
-  use Sub::Exporter -setup => { groups => { cipher => \&build_cipher_group } };
-
-  sub build_cipher_group {
-    my ($class, $group, $arg) = @_;
-    my ($encode, $decode) = build_codec($arg->{secret});
-    return { cipher => $encode, decipher => $decode };
-  }
-
-The C<cipher> and C<decipher> routines are built in a group because they are
-built together by code which encloses their secret in their environment.
-
-=head3 Default Groups
-
-If a module that uses Sub::Exporter is C<use>d with no arguments, it will try
-to export the group named C<default>.  If that group has not been specifically
-configured, it will be empty, and nothing will happen.
-
-Another group is also created if not defined: C<all>.  The C<all> group
-contains all the exports from the exports list.
-
-=head2 Collector Configuration
-
-The C<collectors> entry in the exporter configuration gives names which, when
-found in the import call, have their values collected and passed to every
-generator.
-
-For example, the C<build_analyzer> generator that we saw above could be
-rewritten as:
-
- sub build_analyzer {
-   my ($class, $name, $arg, $col) = @_;
-
-   return sub {
-     my $data      = shift;
-     my $tolerance = shift || $arg->{tolerance} || $col->{defaults}{tolerance};
-     my $passes    = shift || $arg->{passes}    || $col->{defaults}{passes};
-
-     analyze($data, $tolerance, $passes);
-   }
- }
-
-That would allow the importer to specify global defaults for his imports:
-
-  use Data::Analyze
-    'analyze',
-    analyze  => { tolerance => 0.10, -as => analyze10 },
-    analyze  => { tolerance => 0.15, passes => 50, -as => analyze50 },
-    defaults => { passes => 10 };
-
-  my $A = analyze10($data);     # equivalent to analyze($data, 0.10, 10);
-  my $C = analyze50($data);     # equivalent to analyze($data, 0.15, 50);
-  my $B = analyze($data, 0.20); # equivalent to analyze($data, 0.20, 10);
-
-If values are provided in the C<collectors> list during exporter setup, they
-must be code references, and are used to validate the importer's values.  The
-validator is called when the collection is found, and if it returns false, an
-exception is thrown.  We could ensure that no one tries to set a global data
-default easily:
-
-  collectors => { defaults => sub { return (exists $_[0]->{data}) ? 0 : 1 } }
-
-Collector coderefs can also be used as hooks to perform arbitrary actions
-before anything is exported.
-
-When the coderef is called, it is passed the value of the collection and a
-hashref containing the following entries:
-
-  name        - the name of the collector
-  config      - the exporter configuration (hashref)
-  import_args - the arguments passed to the exporter, sans collections (aref)
-  class       - the package on which the importer was called
-  into        - the package into which exports will be exported
-
-Collectors with all-caps names (that is, made up of underscore or capital A
-through Z) are reserved for special use.  The only currently implemented
-special collector is C<INIT>, whose hook (if present in the exporter
-configuration) is always run before any other hook.
-
-=head1 CALLING THE EXPORTER
-
-Arguments to the exporter (that is, the arguments after the module name in a
-C<use> statement) are parsed as follows:
-
-First, the collectors gather any collections found in the arguments.  Any
-reference type may be given as the value for a collector.  For each collection
-given in the arguments, its validator (if any) is called.
-
-Next, groups are expanded.  If the group is implemented by a group generator,
-the generator is called.  There are two special arguments which, if given to a
-group, have special meaning:
-
-  -prefix - a string to prepend to any export imported from this group
-  -suffix - a string to append to any export imported from this group
-
-Finally, individual export generators are called and all subs, generated or
-otherwise, are installed in the calling package.  There is only one special
-argument for export generators:
-
-  -as     - where to install the exported sub
-
-Normally, C<-as> will contain an alternate name for the routine.  It may,
-however, contain a reference to a scalar.  If that is the case, a reference the
-generated routine will be placed in the scalar referenced by C<-as>.  It will
-not be installed into the calling package.
-
-=head2 Special Exporter Arguments
-
-The generated exporter accept some special options, which may be passed as the
-first argument, in a hashref.
-
-These options are:
-
-  into_level
-  into
-  generator
-  installer
-
-These override the same-named configuration options described in L</EXPORTER
-CONFIGURATION>.
-
-=head1 SUBROUTINES
-
-=head2 setup_exporter
-
-This routine builds and installs an C<import> routine.  It is called with one
-argument, a hashref containing the exporter configuration.  Using this, it
-builds an exporter and installs it into the calling package with the name
-"import."  In addition to the normal exporter configuration, a few named
-arguments may be passed in the hashref:
-
-  into       - into what package should the exporter be installed
-  into_level - into what level up the stack should the exporter be installed
-  as         - what name should the installed exporter be given
-
-By default the exporter is installed with the name C<import> into the immediate
-caller of C<setup_exporter>.  In other words, if your package calls
-C<setup_exporter> without providing any of the three above arguments, it will
-have an C<import> routine installed.
-
-Providing both C<into> and C<into_level> will cause an exception to be thrown.
-
-The exporter is built by C<L</build_exporter>>.
-
-=head2 build_exporter
-
-Given a standard exporter configuration, this routine builds and returns an
-exporter -- that is, a subroutine that can be installed as a class method to
-perform exporting on request.
-
-Usually, this method is called by C<L</setup_exporter>>, which then installs
-the exporter as a package's import routine.
-
-=head2 default_generator
-
-This is Sub::Exporter's default generator.  It takes bits of configuration that
-have been gathered during the import and turns them into a coderef that can be
-installed.
-
-  my $code = default_generator(\%arg);
-
-Passed arguments are:
-
-  class - the class on which the import method was called
-  name  - the name of the export being generated
-  arg   - the arguments to the generator
-  col   - the collections
-
-  generator - the generator to be used to build the export (code or scalar ref)
-
-=head2 default_installer
-
-This is Sub::Exporter's default installer.  It does what Sub::Exporter
-promises: it installs code into the target package.
-
-  default_installer(\%arg, \@to_export);
-
-Passed arguments are:
-
-  into - the package into which exports should be delivered
-
-C<@to_export> is a list of name/value pairs.  The default exporter assigns code
-(the values) to named slots (the names) in the given package.  If the name is a
-scalar reference, the scalar reference is made to point to the code reference
-instead.
-
-=head1 EXPORTS
-
-Sub::Exporter also offers its own exports: the C<setup_exporter> and
-C<build_exporter> routines described above.  It also provides a special "setup"
-collector, which will set up an exporter using the parameters passed to it.
-
-Note that the "setup" collector (seen in examples like the L</SYNOPSIS> above)
-uses C<build_exporter>, not C<setup_exporter>.  This means that the special
-arguments like "into" and "as" for C<setup_exporter> are not accepted here.
-Instead, you may write something like:
-
-  use Sub::Exporter
-    { into => 'Target::Package' },
-    -setup => {
-      -as     => 'do_import',
-      exports => [ ... ],
-    }
-  ;
-
-Finding a good reason for wanting to do this is left as an exercise for the
-reader.
-
-=head1 COMPARISONS
-
-There are a whole mess of exporters on the CPAN.  The features included in
-Sub::Exporter set it apart from any existing Exporter.  Here's a summary of
-some other exporters and how they compare.
-
-=over
-
-=item * L<Exporter> and co.
-
-This is the standard Perl exporter.  Its interface is a little clunky, but it's
-fast and ubiquitous.  It can do some things that Sub::Exporter can't:  it can
-export things other than routines, it can import "everything in this group
-except this symbol," and some other more esoteric things.  These features seem
-to go nearly entirely unused.
-
-It always exports things exactly as they appear in the exporting module; it
-can't rename or customize routines.  Its groups ("tags") can't be nested.
-
-L<Exporter::Lite> is a whole lot like Exporter, but it does significantly less:
-it supports exporting symbols, but not groups, pattern matching, or negation.
-
-The fact that Sub::Exporter can't export symbols other than subroutines is
-a good idea, not a missing feature.
-
-For simple uses, setting up Sub::Exporter is about as easy as Exporter.  For
-complex uses, Sub::Exporter makes hard things possible, which would not be
-possible with Exporter.
-
-When using a module that uses Sub::Exporter, users familiar with Exporter will
-probably see no difference in the basics.  These two lines do about the same
-thing in whether the exporting module uses Exporter or Sub::Exporter.
-
-  use Some::Module qw(foo bar baz);
-  use Some::Module qw(foo :bar baz);
-
-The definition for exporting in Exporter.pm might look like this:
-
-  package Some::Module;
-  use base qw(Exporter);
-  our @EXPORT_OK   = qw(foo bar baz quux);
-  our %EXPORT_TAGS = (bar => [ qw(bar baz) ]);
-
-Using Sub::Exporter, it would look like this:
-
-  package Some::Module;
-  use Sub::Exporter -setup => {
-    exports => [ qw(foo bar baz quux) ],
-    groups  => { bar => [ qw(bar baz) ]}
-  };
-
-Sub::Exporter respects inheritance, so that a package may export inherited
-routines, and will export the most inherited version.  Exporting methods
-without currying away the invocant is a bad idea, but Sub::Exporter allows you
-to do just that -- and anyway, there are other uses for this feature, like
-packages of exported subroutines which use inheritance specifically to allow
-more specialized, but similar, packages.
-
-L<Exporter::Easy> provides a wrapper around the standard Exporter.  It makes it
-simpler to build groups, but doesn't provide any more functionality.  Because
-it is a front-end to Exporter, it will store your exporter's configuration in
-global package variables.
-
-=item * Attribute-Based Exporters
-
-Some exporters use attributes to mark variables to export.  L<Exporter::Simple>
-supports exporting any kind of symbol, and supports groups.  Using a module
-like Exporter or Sub::Exporter, it's easy to look at one place and see what is
-exported, but it's impossible to look at a variable definition and see whether
-it is exported by that alone.  Exporter::Simple makes this trade in reverse:
-each variable's declaration includes its export definition, but there is no one
-place to look to find a manifest of exports.
-
-More importantly, Exporter::Simple does not add any new features to those of
-Exporter.  In fact, like Exporter::Easy, it is just a front-end to Exporter, so
-it ends up storing its configuration in global package variables.  (This means
-that there is one place to look for your exporter's manifest, actually.  You
-can inspect the C<@EXPORT> package variables, and other related package
-variables, at runtime.)
-
-L<Perl6::Export> isn't actually attribute based, but looks similar.  Its syntax
-is borrowed from Perl 6, and implemented by a source filter.  It is a prototype
-of an interface that is still being designed.  It should probably be avoided
-for production work.  On the other hand, L<Perl6::Export::Attrs> implements
-Perl 6-like exporting, but translates it into Perl 5 by providing attributes.
-
-=item * Other Exporters
-
-L<Exporter::Renaming> wraps the standard Exporter to allow it to export symbols
-with changed names.
-
-L<Class::Exporter> performs a special kind of routine generation, giving each
-importing package an instance of your class, and then exporting the instance's
-methods as normal routines.  (Sub::Exporter, of course, can easily emulate this
-behavior, as shown above.)
-
-L<Exporter::Tidy> implements a form of renaming (using its C<_map> argument)
-and of prefixing, and implements groups.  It also avoids using package
-variables for its configuration.
-
-=back
-
-=head1 TODO
-
-=over
-
-=item * write a set of longer, more demonstrative examples
-
-=item * solidify the "custom exporter" interface (see C<&default_exporter>)
-
-=item * add an "always" group
-
-=back
-
-=head1 THANKS
-
-Hans Dieter Pearcey provided helpful advice while I was writing Sub::Exporter.
-Ian Langworth and Shawn Sorichetti asked some good questions and helped me
-improve my documentation quite a bit.  Yuval Kogman helped me find a bunch of
-little problems.
-
-Thanks, friends!
-
-=head1 BUGS
-
-Please report any bugs or feature requests through the web interface at
-L<http://rt.cpan.org>. I will be notified, and then you'll automatically be
-notified of progress on your bug as I make changes.
-
-=head1 AUTHOR
-
-Ricardo Signes <cpan@semiotic.systems>
-
-=head1 CONTRIBUTORS
-
-=for stopwords David Steinbrunner everybody George Hartzell Hans Dieter Pearcey Karen Etheridge Ricardo Signes Yves Orton
-
-=over 4
-
-=item *
-
-David Steinbrunner <dsteinbrunner@pobox.com>
-
-=item *
-
-everybody <evrybod@gmail.com>
-
-=item *
-
-George Hartzell <hartzell@alerce.com>
-
-=item *
-
-Hans Dieter Pearcey <hdp@cpan.org>
-
-=item *
-
-Karen Etheridge <ether@cpan.org>
-
-=item *
-
-Ricardo Signes <rjbs@semiotic.systems>
-
-=item *
-
-Ricardo Signes <rjbs@users.noreply.github.com>
-
-=item *
-
-Yves Orton <demerphq@gmail.com>
-
-=back
-
-=head1 COPYRIGHT AND LICENSE
-
-This software is copyright (c) 2007 by Ricardo Signes.
-
-This is free software; you can redistribute it and/or modify it under
-the same terms as the Perl 5 programming language system itself.
-
-=cut