image_pack 0.2.0

data/ext/image_pack/vendor/mozjpeg/transupp.c

@@ -0,0 +1,2373 @@
+/*
+ * transupp.c
+ *
+ * This file was part of the Independent JPEG Group's software:
+ * Copyright (C) 1997-2019, Thomas G. Lane, Guido Vollbeding.
+ * libjpeg-turbo Modifications:
+ * Copyright (C) 2010, 2017, 2021-2022, D. R. Commander.
+ * For conditions of distribution and use, see the accompanying README.ijg
+ * file.
+ *
+ * This file contains image transformation routines and other utility code
+ * used by the jpegtran sample application.  These are NOT part of the core
+ * JPEG library.  But we keep these routines separate from jpegtran.c to
+ * ease the task of maintaining jpegtran-like programs that have other user
+ * interfaces.
+ */
+
+/* Although this file really shouldn't have access to the library internals,
+ * it's helpful to let it call jround_up() and jcopy_block_row().
+ */
+#define JPEG_INTERNALS
+
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "transupp.h"           /* My own external interface */
+#include "jpegcomp.h"
+#include <ctype.h>              /* to declare isdigit() */
+
+
+#if JPEG_LIB_VERSION >= 70
+#define dstinfo_min_DCT_h_scaled_size  dstinfo->min_DCT_h_scaled_size
+#define dstinfo_min_DCT_v_scaled_size  dstinfo->min_DCT_v_scaled_size
+#else
+#define dstinfo_min_DCT_h_scaled_size  DCTSIZE
+#define dstinfo_min_DCT_v_scaled_size  DCTSIZE
+#endif
+
+
+#if TRANSFORMS_SUPPORTED
+
+/*
+ * Lossless image transformation routines.  These routines work on DCT
+ * coefficient arrays and thus do not require any lossy decompression
+ * or recompression of the image.
+ * Thanks to Guido Vollbeding for the initial design and code of this feature,
+ * and to Ben Jackson for introducing the cropping feature.
+ *
+ * Horizontal flipping is done in-place, using a single top-to-bottom
+ * pass through the virtual source array.  It will thus be much the
+ * fastest option for images larger than main memory.
+ *
+ * The other routines require a set of destination virtual arrays, so they
+ * need twice as much memory as jpegtran normally does.  The destination
+ * arrays are always written in normal scan order (top to bottom) because
+ * the virtual array manager expects this.  The source arrays will be scanned
+ * in the corresponding order, which means multiple passes through the source
+ * arrays for most of the transforms.  That could result in much thrashing
+ * if the image is larger than main memory.
+ *
+ * If cropping or trimming is involved, the destination arrays may be smaller
+ * than the source arrays.  Note it is not possible to do horizontal flip
+ * in-place when a nonzero Y crop offset is specified, since we'd have to move
+ * data from one block row to another but the virtual array manager doesn't
+ * guarantee we can touch more than one row at a time.  So in that case,
+ * we have to use a separate destination array.
+ *
+ * Some notes about the operating environment of the individual transform
+ * routines:
+ * 1. Both the source and destination virtual arrays are allocated from the
+ *    source JPEG object, and therefore should be manipulated by calling the
+ *    source's memory manager.
+ * 2. The destination's component count should be used.  It may be smaller
+ *    than the source's when forcing to grayscale.
+ * 3. Likewise the destination's sampling factors should be used.  When
+ *    forcing to grayscale the destination's sampling factors will be all 1,
+ *    and we may as well take that as the effective iMCU size.
+ * 4. When "trim" is in effect, the destination's dimensions will be the
+ *    trimmed values but the source's will be untrimmed.
+ * 5. When "crop" is in effect, the destination's dimensions will be the
+ *    cropped values but the source's will be uncropped.  Each transform
+ *    routine is responsible for picking up source data starting at the
+ *    correct X and Y offset for the crop region.  (The X and Y offsets
+ *    passed to the transform routines are measured in iMCU blocks of the
+ *    destination.)
+ * 6. All the routines assume that the source and destination buffers are
+ *    padded out to a full iMCU boundary.  This is true, although for the
+ *    source buffer it is an undocumented property of jdcoefct.c.
+ */
+
+
+LOCAL(void)
+dequant_comp(j_decompress_ptr cinfo, jpeg_component_info *compptr,
+             jvirt_barray_ptr coef_array, JQUANT_TBL *qtblptr1)
+{
+  JDIMENSION blk_x, blk_y;
+  int offset_y, k;
+  JQUANT_TBL *qtblptr;
+  JBLOCKARRAY buffer;
+  JBLOCKROW block;
+  JCOEFPTR ptr;
+
+  qtblptr = compptr->quant_table;
+  for (blk_y = 0; blk_y < compptr->height_in_blocks;
+       blk_y += compptr->v_samp_factor) {
+    buffer = (*cinfo->mem->access_virt_barray)
+      ((j_common_ptr)cinfo, coef_array, blk_y,
+       (JDIMENSION)compptr->v_samp_factor, TRUE);
+    for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+      block = buffer[offset_y];
+      for (blk_x = 0; blk_x < compptr->width_in_blocks; blk_x++) {
+        ptr = block[blk_x];
+        for (k = 0; k < DCTSIZE2; k++)
+          if (qtblptr->quantval[k] != qtblptr1->quantval[k])
+            ptr[k] *= qtblptr->quantval[k] / qtblptr1->quantval[k];
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+requant_comp(j_decompress_ptr cinfo, jpeg_component_info *compptr,
+             jvirt_barray_ptr coef_array, JQUANT_TBL *qtblptr1)
+{
+  JDIMENSION blk_x, blk_y;
+  int offset_y, k;
+  JQUANT_TBL *qtblptr;
+  JBLOCKARRAY buffer;
+  JBLOCKROW block;
+  JCOEFPTR ptr;
+  JCOEF temp, qval;
+
+  qtblptr = compptr->quant_table;
+  for (blk_y = 0; blk_y < compptr->height_in_blocks;
+       blk_y += compptr->v_samp_factor) {
+    buffer = (*cinfo->mem->access_virt_barray)
+      ((j_common_ptr)cinfo, coef_array, blk_y,
+       (JDIMENSION)compptr->v_samp_factor, TRUE);
+    for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+      block = buffer[offset_y];
+      for (blk_x = 0; blk_x < compptr->width_in_blocks; blk_x++) {
+        ptr = block[blk_x];
+        for (k = 0; k < DCTSIZE2; k++) {
+          temp = qtblptr->quantval[k];
+          qval = qtblptr1->quantval[k];
+          if (temp != qval && qval != 0) {
+            temp *= ptr[k];
+            /* The following quantization code is copied from jcdctmgr.c */
+#ifdef FAST_DIVIDE
+#define DIVIDE_BY(a, b)  a /= b
+#else
+#define DIVIDE_BY(a, b)  if (a >= b) a /= b;  else a = 0
+#endif
+            if (temp < 0) {
+              temp = -temp;
+              temp += qval >> 1; /* for rounding */
+              DIVIDE_BY(temp, qval);
+              temp = -temp;
+            } else {
+              temp += qval >> 1; /* for rounding */
+              DIVIDE_BY(temp, qval);
+            }
+            ptr[k] = temp;
+          }
+        }
+      }
+    }
+  }
+}
+
+
+/*
+ * Calculate largest common denominator using Euclid's algorithm.
+ */
+LOCAL(JCOEF)
+largest_common_denominator(JCOEF a, JCOEF b)
+{
+  JCOEF c;
+
+  do {
+    c = a % b;
+    a = b;
+    b = c;
+  } while (c);
+
+  return a;
+}
+
+
+LOCAL(void)
+adjust_quant(j_decompress_ptr srcinfo, jvirt_barray_ptr *src_coef_arrays,
+             j_decompress_ptr dropinfo, jvirt_barray_ptr *drop_coef_arrays,
+             boolean trim, j_compress_ptr dstinfo)
+{
+  jpeg_component_info *compptr1, *compptr2;
+  JQUANT_TBL *qtblptr1, *qtblptr2, *qtblptr3;
+  int ci, k;
+
+  for (ci = 0; ci < dstinfo->num_components && ci < dropinfo->num_components;
+       ci++) {
+    compptr1 = srcinfo->comp_info + ci;
+    compptr2 = dropinfo->comp_info + ci;
+    qtblptr1 = compptr1->quant_table;
+    qtblptr2 = compptr2->quant_table;
+    for (k = 0; k < DCTSIZE2; k++) {
+      if (qtblptr1->quantval[k] != qtblptr2->quantval[k]) {
+        if (trim)
+          requant_comp(dropinfo, compptr2, drop_coef_arrays[ci], qtblptr1);
+        else {
+          qtblptr3 = dstinfo->quant_tbl_ptrs[compptr1->quant_tbl_no];
+          for (k = 0; k < DCTSIZE2; k++)
+            if (qtblptr1->quantval[k] != qtblptr2->quantval[k])
+              qtblptr3->quantval[k] =
+                largest_common_denominator(qtblptr1->quantval[k],
+                                           qtblptr2->quantval[k]);
+          dequant_comp(srcinfo, compptr1, src_coef_arrays[ci], qtblptr3);
+          dequant_comp(dropinfo, compptr2, drop_coef_arrays[ci], qtblptr3);
+        }
+        break;
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_drop(j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+        JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+        jvirt_barray_ptr *src_coef_arrays,
+        j_decompress_ptr dropinfo, jvirt_barray_ptr *drop_coef_arrays,
+        JDIMENSION drop_width, JDIMENSION drop_height)
+/* Drop (insert) the contents of another image into the source image.  If the
+ * number of components in the drop image is smaller than the number of
+ * components in the destination image, then we fill in the remaining
+ * components with zero.  This allows for dropping the contents of grayscale
+ * images into (arbitrarily sampled) color images.
+ */
+{
+  JDIMENSION comp_width, comp_height;
+  JDIMENSION blk_y, x_drop_blocks, y_drop_blocks;
+  int ci, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  jpeg_component_info *compptr;
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = drop_width * compptr->h_samp_factor;
+    comp_height = drop_height * compptr->v_samp_factor;
+    x_drop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_drop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (blk_y = 0; blk_y < comp_height; blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+        ((j_common_ptr)srcinfo, src_coef_arrays[ci], blk_y + y_drop_blocks,
+         (JDIMENSION)compptr->v_samp_factor, TRUE);
+      if (ci < dropinfo->num_components) {
+        src_buffer = (*dropinfo->mem->access_virt_barray)
+          ((j_common_ptr)dropinfo, drop_coef_arrays[ci], blk_y,
+           (JDIMENSION)compptr->v_samp_factor, FALSE);
+        for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+          jcopy_block_row(src_buffer[offset_y],
+                          dst_buffer[offset_y] + x_drop_blocks, comp_width);
+        }
+      } else {
+        for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+          memset(dst_buffer[offset_y] + x_drop_blocks, 0,
+                 comp_width * sizeof(JBLOCK));
+        }
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_crop(j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+        JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+        jvirt_barray_ptr *src_coef_arrays,
+        jvirt_barray_ptr *dst_coef_arrays)
+/* Crop.  This is only used when no rotate/flip is requested with the crop. */
+{
+  JDIMENSION dst_blk_y, x_crop_blocks, y_crop_blocks;
+  int ci, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  jpeg_component_info *compptr;
+
+  /* We simply have to copy the right amount of data (the destination's
+   * image size) starting at the given X and Y offsets in the source.
+   */
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+         dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+        ((j_common_ptr)srcinfo, dst_coef_arrays[ci], dst_blk_y,
+         (JDIMENSION)compptr->v_samp_factor, TRUE);
+      src_buffer = (*srcinfo->mem->access_virt_barray)
+        ((j_common_ptr)srcinfo, src_coef_arrays[ci], dst_blk_y + y_crop_blocks,
+         (JDIMENSION)compptr->v_samp_factor, FALSE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+        jcopy_block_row(src_buffer[offset_y] + x_crop_blocks,
+                        dst_buffer[offset_y], compptr->width_in_blocks);
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_crop_ext_zero(j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+                 JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+                 jvirt_barray_ptr *src_coef_arrays,
+                 jvirt_barray_ptr *dst_coef_arrays)
+/* Crop.  This is only used when no rotate/flip is requested with the crop.
+ * Extension: If the destination size is larger than the source, we fill in the
+ * expanded region with zero (neutral gray).  Note that we also have to zero
+ * partial iMCUs at the right and bottom edge of the source image area in this
+ * case.
+ */
+{
+  JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height;
+  JDIMENSION dst_blk_y, x_crop_blocks, y_crop_blocks;
+  int ci, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  jpeg_component_info *compptr;
+
+  MCU_cols = srcinfo->output_width /
+             (dstinfo->max_h_samp_factor * dstinfo_min_DCT_h_scaled_size);
+  MCU_rows = srcinfo->output_height /
+             (dstinfo->max_v_samp_factor * dstinfo_min_DCT_v_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+         dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+        ((j_common_ptr)srcinfo, dst_coef_arrays[ci], dst_blk_y,
+         (JDIMENSION)compptr->v_samp_factor, TRUE);
+      if (dstinfo->_jpeg_height > srcinfo->output_height) {
+        if (dst_blk_y < y_crop_blocks ||
+            dst_blk_y >= y_crop_blocks + comp_height) {
+          for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+            memset(dst_buffer[offset_y], 0,
+                   compptr->width_in_blocks * sizeof(JBLOCK));
+          }
+          continue;
+        }
+        src_buffer = (*srcinfo->mem->access_virt_barray)
+          ((j_common_ptr)srcinfo, src_coef_arrays[ci],
+           dst_blk_y - y_crop_blocks, (JDIMENSION)compptr->v_samp_factor,
+           FALSE);
+      } else {
+        src_buffer = (*srcinfo->mem->access_virt_barray)
+          ((j_common_ptr)srcinfo, src_coef_arrays[ci],
+           dst_blk_y + y_crop_blocks, (JDIMENSION)compptr->v_samp_factor,
+           FALSE);
+      }
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+        if (dstinfo->_jpeg_width > srcinfo->output_width) {
+          if (x_crop_blocks > 0) {
+            memset(dst_buffer[offset_y], 0, x_crop_blocks * sizeof(JBLOCK));
+          }
+          jcopy_block_row(src_buffer[offset_y],
+                          dst_buffer[offset_y] + x_crop_blocks, comp_width);
+          if (compptr->width_in_blocks > x_crop_blocks + comp_width) {
+            memset(dst_buffer[offset_y] + x_crop_blocks + comp_width, 0,
+                   (compptr->width_in_blocks - x_crop_blocks - comp_width) *
+                   sizeof(JBLOCK));
+          }
+        } else {
+          jcopy_block_row(src_buffer[offset_y] + x_crop_blocks,
+                          dst_buffer[offset_y], compptr->width_in_blocks);
+        }
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_crop_ext_flat(j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+                 JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+                 jvirt_barray_ptr *src_coef_arrays,
+                 jvirt_barray_ptr *dst_coef_arrays)
+/* Crop.  This is only used when no rotate/flip is requested with the crop.
+ * Extension: The destination width is larger than the source, and we fill in
+ * the expanded region with the DC coefficient of the adjacent block.  Note
+ * that we also have to fill partial iMCUs at the right and bottom edge of the
+ * source image area in this case.
+ */
+{
+  JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height;
+  JDIMENSION dst_blk_x, dst_blk_y, x_crop_blocks, y_crop_blocks;
+  int ci, offset_y;
+  JCOEF dc;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  jpeg_component_info *compptr;
+
+  MCU_cols = srcinfo->output_width /
+             (dstinfo->max_h_samp_factor * dstinfo_min_DCT_h_scaled_size);
+  MCU_rows = srcinfo->output_height /
+             (dstinfo->max_v_samp_factor * dstinfo_min_DCT_v_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+         dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+        ((j_common_ptr)srcinfo, dst_coef_arrays[ci], dst_blk_y,
+         (JDIMENSION)compptr->v_samp_factor, TRUE);
+      if (dstinfo->_jpeg_height > srcinfo->output_height) {
+        if (dst_blk_y < y_crop_blocks ||
+            dst_blk_y >= y_crop_blocks + comp_height) {
+          for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+            memset(dst_buffer[offset_y], 0,
+                   compptr->width_in_blocks * sizeof(JBLOCK));
+          }
+          continue;
+        }
+        src_buffer = (*srcinfo->mem->access_virt_barray)
+          ((j_common_ptr)srcinfo, src_coef_arrays[ci],
+           dst_blk_y - y_crop_blocks, (JDIMENSION)compptr->v_samp_factor,
+           FALSE);
+      } else {
+        src_buffer = (*srcinfo->mem->access_virt_barray)
+          ((j_common_ptr)srcinfo, src_coef_arrays[ci],
+           dst_blk_y + y_crop_blocks, (JDIMENSION)compptr->v_samp_factor,
+          FALSE);
+      }
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+        if (x_crop_blocks > 0) {
+          memset(dst_buffer[offset_y], 0, x_crop_blocks * sizeof(JBLOCK));
+          dc = src_buffer[offset_y][0][0];
+          for (dst_blk_x = 0; dst_blk_x < x_crop_blocks; dst_blk_x++) {
+            dst_buffer[offset_y][dst_blk_x][0] = dc;
+          }
+        }
+        jcopy_block_row(src_buffer[offset_y],
+                        dst_buffer[offset_y] + x_crop_blocks, comp_width);
+        if (compptr->width_in_blocks > x_crop_blocks + comp_width) {
+          memset(dst_buffer[offset_y] + x_crop_blocks + comp_width, 0,
+                 (compptr->width_in_blocks - x_crop_blocks - comp_width) *
+                 sizeof(JBLOCK));
+          dc = src_buffer[offset_y][comp_width - 1][0];
+          for (dst_blk_x = x_crop_blocks + comp_width;
+               dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
+            dst_buffer[offset_y][dst_blk_x][0] = dc;
+          }
+        }
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_crop_ext_reflect(j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+                    JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+                    jvirt_barray_ptr *src_coef_arrays,
+                    jvirt_barray_ptr *dst_coef_arrays)
+/* Crop.  This is only used when no rotate/flip is requested with the crop.
+ * Extension: The destination width is larger than the source, and we fill in
+ * the expanded region with repeated reflections of the source image.  Note
+ * that we also have to fill partial iMCUs at the right and bottom edge of the
+ * source image area in this case.
+ */
+{
+  JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, src_blk_x;
+  JDIMENSION dst_blk_x, dst_blk_y, x_crop_blocks, y_crop_blocks;
+  int ci, k, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JBLOCKROW src_row_ptr, dst_row_ptr;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  MCU_cols = srcinfo->output_width /
+             (dstinfo->max_h_samp_factor * dstinfo_min_DCT_h_scaled_size);
+  MCU_rows = srcinfo->output_height /
+             (dstinfo->max_v_samp_factor * dstinfo_min_DCT_v_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+         dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+        ((j_common_ptr)srcinfo, dst_coef_arrays[ci], dst_blk_y,
+         (JDIMENSION)compptr->v_samp_factor, TRUE);
+      if (dstinfo->_jpeg_height > srcinfo->output_height) {
+        if (dst_blk_y < y_crop_blocks ||
+            dst_blk_y >= y_crop_blocks + comp_height) {
+          for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+            memset(dst_buffer[offset_y], 0,
+                   compptr->width_in_blocks * sizeof(JBLOCK));
+          }
+          continue;
+        }
+        src_buffer = (*srcinfo->mem->access_virt_barray)
+          ((j_common_ptr)srcinfo, src_coef_arrays[ci],
+           dst_blk_y - y_crop_blocks, (JDIMENSION)compptr->v_samp_factor,
+           FALSE);
+      } else {
+        src_buffer = (*srcinfo->mem->access_virt_barray)
+          ((j_common_ptr)srcinfo, src_coef_arrays[ci],
+           dst_blk_y + y_crop_blocks, (JDIMENSION)compptr->v_samp_factor,
+           FALSE);
+      }
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+        /* Copy source region */
+        jcopy_block_row(src_buffer[offset_y],
+                        dst_buffer[offset_y] + x_crop_blocks, comp_width);
+        if (x_crop_blocks > 0) {
+          /* Reflect to left */
+          dst_row_ptr = dst_buffer[offset_y] + x_crop_blocks;
+          for (dst_blk_x = x_crop_blocks; dst_blk_x > 0;) {
+            src_row_ptr = dst_row_ptr;      /* (re)set axis of reflection */
+            for (src_blk_x = comp_width; src_blk_x > 0 && dst_blk_x > 0;
+                 src_blk_x--, dst_blk_x--) {
+              dst_ptr = *(--dst_row_ptr);   /* destination goes left */
+              src_ptr = *src_row_ptr++;     /* source goes right */
+              /* This unrolled loop doesn't need to know which row it's on. */
+              for (k = 0; k < DCTSIZE2; k += 2) {
+                *dst_ptr++ = *src_ptr++;    /* copy even column */
+                *dst_ptr++ = -(*src_ptr++); /* copy odd column with sign
+                                               change */
+              }
+            }
+          }
+        }
+        if (compptr->width_in_blocks > x_crop_blocks + comp_width) {
+          /* Reflect to right */
+          dst_row_ptr = dst_buffer[offset_y] + x_crop_blocks + comp_width;
+          for (dst_blk_x = compptr->width_in_blocks - x_crop_blocks - comp_width;
+               dst_blk_x > 0;) {
+            src_row_ptr = dst_row_ptr;      /* (re)set axis of reflection */
+            for (src_blk_x = comp_width; src_blk_x > 0 && dst_blk_x > 0;
+                 src_blk_x--, dst_blk_x--) {
+              dst_ptr = *dst_row_ptr++;     /* destination goes right */
+              src_ptr = *(--src_row_ptr);   /* source goes left */
+              /* This unrolled loop doesn't need to know which row it's on. */
+              for (k = 0; k < DCTSIZE2; k += 2) {
+                *dst_ptr++ = *src_ptr++;    /* copy even column */
+                *dst_ptr++ = -(*src_ptr++); /* copy odd column with sign
+                                               change */
+              }
+            }
+          }
+        }
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_wipe(j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+        JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+        jvirt_barray_ptr *src_coef_arrays,
+        JDIMENSION drop_width, JDIMENSION drop_height)
+/* Wipe - discard image contents of specified region and fill with zero
+ * (neutral gray)
+ */
+{
+  JDIMENSION x_wipe_blocks, wipe_width;
+  JDIMENSION y_wipe_blocks, wipe_bottom;
+  int ci, offset_y;
+  JBLOCKARRAY buffer;
+  jpeg_component_info *compptr;
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    x_wipe_blocks = x_crop_offset * compptr->h_samp_factor;
+    wipe_width = drop_width * compptr->h_samp_factor;
+    y_wipe_blocks = y_crop_offset * compptr->v_samp_factor;
+    wipe_bottom = drop_height * compptr->v_samp_factor + y_wipe_blocks;
+    for (; y_wipe_blocks < wipe_bottom;
+         y_wipe_blocks += compptr->v_samp_factor) {
+      buffer = (*srcinfo->mem->access_virt_barray)
+        ((j_common_ptr)srcinfo, src_coef_arrays[ci], y_wipe_blocks,
+         (JDIMENSION)compptr->v_samp_factor, TRUE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+        memset(buffer[offset_y] + x_wipe_blocks, 0,
+               wipe_width * sizeof(JBLOCK));
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_flatten(j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+           JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+           jvirt_barray_ptr *src_coef_arrays,
+           JDIMENSION drop_width, JDIMENSION drop_height)
+/* Flatten - discard image contents of specified region, similarly to wipe,
+ * but fill with the average of adjacent blocks instead of zero.
+ */
+{
+  JDIMENSION x_wipe_blocks, wipe_width, wipe_right;
+  JDIMENSION y_wipe_blocks, wipe_bottom, blk_x;
+  int ci, offset_y, dc_left_value, dc_right_value, average;
+  JBLOCKARRAY buffer;
+  jpeg_component_info *compptr;
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    x_wipe_blocks = x_crop_offset * compptr->h_samp_factor;
+    wipe_width = drop_width * compptr->h_samp_factor;
+    wipe_right = wipe_width + x_wipe_blocks;
+    y_wipe_blocks = y_crop_offset * compptr->v_samp_factor;
+    wipe_bottom = drop_height * compptr->v_samp_factor + y_wipe_blocks;
+    for (; y_wipe_blocks < wipe_bottom;
+         y_wipe_blocks += compptr->v_samp_factor) {
+      buffer = (*srcinfo->mem->access_virt_barray)
+        ((j_common_ptr)srcinfo, src_coef_arrays[ci], y_wipe_blocks,
+         (JDIMENSION)compptr->v_samp_factor, TRUE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+        memset(buffer[offset_y] + x_wipe_blocks, 0,
+               wipe_width * sizeof(JBLOCK));
+        if (x_wipe_blocks > 0) {
+          dc_left_value = buffer[offset_y][x_wipe_blocks - 1][0];
+          if (wipe_right < compptr->width_in_blocks) {
+            dc_right_value = buffer[offset_y][wipe_right][0];
+            average = (dc_left_value + dc_right_value) >> 1;
+          } else {
+            average = dc_left_value;
+          }
+        } else if (wipe_right < compptr->width_in_blocks) {
+          average = buffer[offset_y][wipe_right][0];
+        } else continue;
+        for (blk_x = x_wipe_blocks; blk_x < wipe_right; blk_x++) {
+          buffer[offset_y][blk_x][0] = (JCOEF)average;
+        }
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_reflect(j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+           JDIMENSION x_crop_offset, jvirt_barray_ptr *src_coef_arrays,
+           JDIMENSION drop_width, JDIMENSION drop_height)
+/* Reflect - discard image contents of specified region, similarly to wipe,
+ * but fill with repeated reflections of the outside region instead of zero.
+ * NB: y_crop_offset is assumed to be zero.
+ */
+{
+  JDIMENSION x_wipe_blocks, wipe_width;
+  JDIMENSION y_wipe_blocks, wipe_bottom;
+  JDIMENSION src_blk_x, dst_blk_x;
+  int ci, k, offset_y;
+  JBLOCKARRAY buffer;
+  JBLOCKROW src_row_ptr, dst_row_ptr;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    x_wipe_blocks = x_crop_offset * compptr->h_samp_factor;
+    wipe_width = drop_width * compptr->h_samp_factor;
+    wipe_bottom = drop_height * compptr->v_samp_factor;
+    for (y_wipe_blocks = 0; y_wipe_blocks < wipe_bottom;
+         y_wipe_blocks += compptr->v_samp_factor) {
+      buffer = (*srcinfo->mem->access_virt_barray)
+        ((j_common_ptr)srcinfo, src_coef_arrays[ci], y_wipe_blocks,
+         (JDIMENSION)compptr->v_samp_factor, TRUE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+        if (x_wipe_blocks > 0) {
+          /* Reflect from left */
+          dst_row_ptr = buffer[offset_y] + x_wipe_blocks;
+          for (dst_blk_x = wipe_width; dst_blk_x > 0;) {
+            src_row_ptr = dst_row_ptr;     /* (re)set axis of reflection */
+            for (src_blk_x = x_wipe_blocks;
+                 src_blk_x > 0 && dst_blk_x > 0; src_blk_x--, dst_blk_x--) {
+              dst_ptr = *dst_row_ptr++;    /* destination goes right */
+              src_ptr = *(--src_row_ptr);  /* source goes left */
+              /* this unrolled loop doesn't need to know which row it's on... */
+              for (k = 0; k < DCTSIZE2; k += 2) {
+                *dst_ptr++ = *src_ptr++;   /* copy even column */
+                *dst_ptr++ = -(*src_ptr++); /* copy odd column with sign change */
+              }
+            }
+          }
+        } else if (compptr->width_in_blocks > x_wipe_blocks + wipe_width) {
+          /* Reflect from right */
+          dst_row_ptr = buffer[offset_y] + x_wipe_blocks + wipe_width;
+          for (dst_blk_x = wipe_width; dst_blk_x > 0;) {
+            src_row_ptr = dst_row_ptr;     /* (re)set axis of reflection */
+            src_blk_x = compptr->width_in_blocks - x_wipe_blocks - wipe_width;
+            for (; src_blk_x > 0 && dst_blk_x > 0; src_blk_x--, dst_blk_x--) {
+              dst_ptr = *(--dst_row_ptr);  /* destination goes left */
+              src_ptr = *src_row_ptr++;    /* source goes right */
+              /* this unrolled loop doesn't need to know which row it's on... */
+              for (k = 0; k < DCTSIZE2; k += 2) {
+                *dst_ptr++ = *src_ptr++;   /* copy even column */
+                *dst_ptr++ = -(*src_ptr++); /* copy odd column with sign change */
+              }
+            }
+          }
+        } else {
+          memset(buffer[offset_y] + x_wipe_blocks, 0,
+                 wipe_width * sizeof(JBLOCK));
+        }
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_flip_h_no_crop(j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+                  JDIMENSION x_crop_offset, jvirt_barray_ptr *src_coef_arrays)
+/* Horizontal flip; done in-place, so no separate dest array is required.
+ * NB: this only works when y_crop_offset is zero.
+ */
+{
+  JDIMENSION MCU_cols, comp_width, blk_x, blk_y, x_crop_blocks;
+  int ci, k, offset_y;
+  JBLOCKARRAY buffer;
+  JCOEFPTR ptr1, ptr2;
+  JCOEF temp1, temp2;
+  jpeg_component_info *compptr;
+
+  /* Horizontal mirroring of DCT blocks is accomplished by swapping
+   * pairs of blocks in-place.  Within a DCT block, we perform horizontal
+   * mirroring by changing the signs of odd-numbered columns.
+   * Partial iMCUs at the right edge are left untouched.
+   */
+  MCU_cols = srcinfo->output_width /
+             (dstinfo->max_h_samp_factor * dstinfo_min_DCT_h_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    for (blk_y = 0; blk_y < compptr->height_in_blocks;
+         blk_y += compptr->v_samp_factor) {
+      buffer = (*srcinfo->mem->access_virt_barray)
+        ((j_common_ptr)srcinfo, src_coef_arrays[ci], blk_y,
+         (JDIMENSION)compptr->v_samp_factor, TRUE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+        /* Do the mirroring */
+        for (blk_x = 0; blk_x * 2 < comp_width; blk_x++) {
+          ptr1 = buffer[offset_y][blk_x];
+          ptr2 = buffer[offset_y][comp_width - blk_x - 1];
+          /* this unrolled loop doesn't need to know which row it's on... */
+          for (k = 0; k < DCTSIZE2; k += 2) {
+            temp1 = *ptr1;      /* swap even column */
+            temp2 = *ptr2;
+            *ptr1++ = temp2;
+            *ptr2++ = temp1;
+            temp1 = *ptr1;      /* swap odd column with sign change */
+            temp2 = *ptr2;
+            *ptr1++ = -temp2;
+            *ptr2++ = -temp1;
+          }
+        }
+        if (x_crop_blocks > 0) {
+          /* Now left-justify the portion of the data to be kept.
+           * We can't use a single jcopy_block_row() call because that routine
+           * depends on memcpy(), whose behavior is unspecified for overlapping
+           * source and destination areas.  Sigh.
+           */
+          for (blk_x = 0; blk_x < compptr->width_in_blocks; blk_x++) {
+            jcopy_block_row(buffer[offset_y] + blk_x + x_crop_blocks,
+                            buffer[offset_y] + blk_x, (JDIMENSION)1);
+          }
+        }
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_flip_h(j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+          JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+          jvirt_barray_ptr *src_coef_arrays,
+          jvirt_barray_ptr *dst_coef_arrays)
+/* Horizontal flip in general cropping case */
+{
+  JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
+  int ci, k, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JBLOCKROW src_row_ptr, dst_row_ptr;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  /* Here we must output into a separate array because we can't touch
+   * different rows of a single virtual array simultaneously.  Otherwise,
+   * this is essentially the same as the routine above.
+   */
+  MCU_cols = srcinfo->output_width /
+             (dstinfo->max_h_samp_factor * dstinfo_min_DCT_h_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+         dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+        ((j_common_ptr)srcinfo, dst_coef_arrays[ci], dst_blk_y,
+         (JDIMENSION)compptr->v_samp_factor, TRUE);
+      src_buffer = (*srcinfo->mem->access_virt_barray)
+        ((j_common_ptr)srcinfo, src_coef_arrays[ci], dst_blk_y + y_crop_blocks,
+         (JDIMENSION)compptr->v_samp_factor, FALSE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+        dst_row_ptr = dst_buffer[offset_y];
+        src_row_ptr = src_buffer[offset_y];
+        for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
+             dst_blk_x++) {
+          if (x_crop_blocks + dst_blk_x < comp_width) {
+            /* Do the mirrorable blocks */
+            dst_ptr = dst_row_ptr[dst_blk_x];
+            src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1];
+            /* this unrolled loop doesn't need to know which row it's on... */
+            for (k = 0; k < DCTSIZE2; k += 2) {
+              *dst_ptr++ = *src_ptr++;    /* copy even column */
+              *dst_ptr++ = -(*src_ptr++); /* copy odd column with sign
+                                             change */
+            }
+          } else {
+            /* Copy last partial block(s) verbatim */
+            jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks,
+                            dst_row_ptr + dst_blk_x, (JDIMENSION)1);
+          }
+        }
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_flip_v(j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+          JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+          jvirt_barray_ptr *src_coef_arrays,
+          jvirt_barray_ptr *dst_coef_arrays)
+/* Vertical flip */
+{
+  JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
+  int ci, i, j, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JBLOCKROW src_row_ptr, dst_row_ptr;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  /* We output into a separate array because we can't touch different
+   * rows of the source virtual array simultaneously.  Otherwise, this
+   * is a pretty straightforward analog of horizontal flip.
+   * Within a DCT block, vertical mirroring is done by changing the signs
+   * of odd-numbered rows.
+   * Partial iMCUs at the bottom edge are copied verbatim.
+   */
+  MCU_rows = srcinfo->output_height /
+             (dstinfo->max_v_samp_factor * dstinfo_min_DCT_v_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+         dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+        ((j_common_ptr)srcinfo, dst_coef_arrays[ci], dst_blk_y,
+         (JDIMENSION)compptr->v_samp_factor, TRUE);
+      if (y_crop_blocks + dst_blk_y < comp_height) {
+        /* Row is within the mirrorable area. */
+        src_buffer = (*srcinfo->mem->access_virt_barray)
+          ((j_common_ptr)srcinfo, src_coef_arrays[ci],
+           comp_height - y_crop_blocks - dst_blk_y -
+           (JDIMENSION)compptr->v_samp_factor,
+           (JDIMENSION)compptr->v_samp_factor, FALSE);
+      } else {
+        /* Bottom-edge blocks will be copied verbatim. */
+        src_buffer = (*srcinfo->mem->access_virt_barray)
+          ((j_common_ptr)srcinfo, src_coef_arrays[ci],
+           dst_blk_y + y_crop_blocks,
+           (JDIMENSION)compptr->v_samp_factor, FALSE);
+      }
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+        if (y_crop_blocks + dst_blk_y < comp_height) {
+          /* Row is within the mirrorable area. */
+          dst_row_ptr = dst_buffer[offset_y];
+          src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1];
+          src_row_ptr += x_crop_blocks;
+          for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
+               dst_blk_x++) {
+            dst_ptr = dst_row_ptr[dst_blk_x];
+            src_ptr = src_row_ptr[dst_blk_x];
+            for (i = 0; i < DCTSIZE; i += 2) {
+              /* copy even row */
+              for (j = 0; j < DCTSIZE; j++)
+                *dst_ptr++ = *src_ptr++;
+              /* copy odd row with sign change */
+              for (j = 0; j < DCTSIZE; j++)
+                *dst_ptr++ = -(*src_ptr++);
+            }
+          }
+        } else {
+          /* Just copy row verbatim. */
+          jcopy_block_row(src_buffer[offset_y] + x_crop_blocks,
+                          dst_buffer[offset_y], compptr->width_in_blocks);
+        }
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_transpose(j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+             JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+             jvirt_barray_ptr *src_coef_arrays,
+             jvirt_barray_ptr *dst_coef_arrays)
+/* Transpose source into destination */
+{
+  JDIMENSION dst_blk_x, dst_blk_y, x_crop_blocks, y_crop_blocks;
+  int ci, i, j, offset_x, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  /* Transposing pixels within a block just requires transposing the
+   * DCT coefficients.
+   * Partial iMCUs at the edges require no special treatment; we simply
+   * process all the available DCT blocks for every component.
+   */
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+         dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+        ((j_common_ptr)srcinfo, dst_coef_arrays[ci], dst_blk_y,
+         (JDIMENSION)compptr->v_samp_factor, TRUE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+        for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
+             dst_blk_x += compptr->h_samp_factor) {
+          src_buffer = (*srcinfo->mem->access_virt_barray)
+            ((j_common_ptr)srcinfo, src_coef_arrays[ci],
+             dst_blk_x + x_crop_blocks,
+             (JDIMENSION)compptr->h_samp_factor, FALSE);
+          for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
+            dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+            src_ptr =
+              src_buffer[offset_x][dst_blk_y + offset_y + y_crop_blocks];
+            for (i = 0; i < DCTSIZE; i++)
+              for (j = 0; j < DCTSIZE; j++)
+                dst_ptr[j * DCTSIZE + i] = src_ptr[i * DCTSIZE + j];
+          }
+        }
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_rot_90(j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+          JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+          jvirt_barray_ptr *src_coef_arrays,
+          jvirt_barray_ptr *dst_coef_arrays)
+/* 90 degree rotation is equivalent to
+ *   1. Transposing the image;
+ *   2. Horizontal mirroring.
+ * These two steps are merged into a single processing routine.
+ */
+{
+  JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
+  int ci, i, j, offset_x, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  /* Because of the horizontal mirror step, we can't process partial iMCUs
+   * at the (output) right edge properly.  They just get transposed and
+   * not mirrored.
+   */
+  MCU_cols = srcinfo->output_height /
+             (dstinfo->max_h_samp_factor * dstinfo_min_DCT_h_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+         dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+        ((j_common_ptr)srcinfo, dst_coef_arrays[ci], dst_blk_y,
+         (JDIMENSION)compptr->v_samp_factor, TRUE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+        for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
+             dst_blk_x += compptr->h_samp_factor) {
+          if (x_crop_blocks + dst_blk_x < comp_width) {
+            /* Block is within the mirrorable area. */
+            src_buffer = (*srcinfo->mem->access_virt_barray)
+              ((j_common_ptr)srcinfo, src_coef_arrays[ci],
+               comp_width - x_crop_blocks - dst_blk_x -
+               (JDIMENSION)compptr->h_samp_factor,
+               (JDIMENSION)compptr->h_samp_factor, FALSE);
+          } else {
+            /* Edge blocks are transposed but not mirrored. */
+            src_buffer = (*srcinfo->mem->access_virt_barray)
+              ((j_common_ptr)srcinfo, src_coef_arrays[ci],
+               dst_blk_x + x_crop_blocks,
+               (JDIMENSION)compptr->h_samp_factor, FALSE);
+          }
+          for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
+            dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+            if (x_crop_blocks + dst_blk_x < comp_width) {
+              /* Block is within the mirrorable area. */
+              src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1]
+                [dst_blk_y + offset_y + y_crop_blocks];
+              for (i = 0; i < DCTSIZE; i++) {
+                for (j = 0; j < DCTSIZE; j++)
+                  dst_ptr[j * DCTSIZE + i] = src_ptr[i * DCTSIZE + j];
+                i++;
+                for (j = 0; j < DCTSIZE; j++)
+                  dst_ptr[j * DCTSIZE + i] = -src_ptr[i * DCTSIZE + j];
+              }
+            } else {
+              /* Edge blocks are transposed but not mirrored. */
+              src_ptr = src_buffer[offset_x]
+                [dst_blk_y + offset_y + y_crop_blocks];
+              for (i = 0; i < DCTSIZE; i++)
+                for (j = 0; j < DCTSIZE; j++)
+                  dst_ptr[j * DCTSIZE + i] = src_ptr[i * DCTSIZE + j];
+            }
+          }
+        }
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_rot_270(j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+           JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+           jvirt_barray_ptr *src_coef_arrays,
+           jvirt_barray_ptr *dst_coef_arrays)
+/* 270 degree rotation is equivalent to
+ *   1. Horizontal mirroring;
+ *   2. Transposing the image.
+ * These two steps are merged into a single processing routine.
+ */
+{
+  JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
+  int ci, i, j, offset_x, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  /* Because of the horizontal mirror step, we can't process partial iMCUs
+   * at the (output) bottom edge properly.  They just get transposed and
+   * not mirrored.
+   */
+  MCU_rows = srcinfo->output_width /
+             (dstinfo->max_v_samp_factor * dstinfo_min_DCT_v_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+         dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+        ((j_common_ptr)srcinfo, dst_coef_arrays[ci], dst_blk_y,
+         (JDIMENSION)compptr->v_samp_factor, TRUE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+        for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
+             dst_blk_x += compptr->h_samp_factor) {
+          src_buffer = (*srcinfo->mem->access_virt_barray)
+            ((j_common_ptr)srcinfo, src_coef_arrays[ci],
+             dst_blk_x + x_crop_blocks,
+             (JDIMENSION)compptr->h_samp_factor, FALSE);
+          for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
+            dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+            if (y_crop_blocks + dst_blk_y < comp_height) {
+              /* Block is within the mirrorable area. */
+              src_ptr = src_buffer[offset_x]
+                [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1];
+              for (i = 0; i < DCTSIZE; i++) {
+                for (j = 0; j < DCTSIZE; j++) {
+                  dst_ptr[j * DCTSIZE + i] = src_ptr[i * DCTSIZE + j];
+                  j++;
+                  dst_ptr[j * DCTSIZE + i] = -src_ptr[i * DCTSIZE + j];
+                }
+              }
+            } else {
+              /* Edge blocks are transposed but not mirrored. */
+              src_ptr = src_buffer[offset_x]
+                [dst_blk_y + offset_y + y_crop_blocks];
+              for (i = 0; i < DCTSIZE; i++)
+                for (j = 0; j < DCTSIZE; j++)
+                  dst_ptr[j * DCTSIZE + i] = src_ptr[i * DCTSIZE + j];
+            }
+          }
+        }
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_rot_180(j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+           JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+           jvirt_barray_ptr *src_coef_arrays,
+           jvirt_barray_ptr *dst_coef_arrays)
+/* 180 degree rotation is equivalent to
+ *   1. Vertical mirroring;
+ *   2. Horizontal mirroring.
+ * These two steps are merged into a single processing routine.
+ */
+{
+  JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
+  int ci, i, j, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JBLOCKROW src_row_ptr, dst_row_ptr;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  MCU_cols = srcinfo->output_width /
+             (dstinfo->max_h_samp_factor * dstinfo_min_DCT_h_scaled_size);
+  MCU_rows = srcinfo->output_height /
+             (dstinfo->max_v_samp_factor * dstinfo_min_DCT_v_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+         dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+        ((j_common_ptr)srcinfo, dst_coef_arrays[ci], dst_blk_y,
+         (JDIMENSION)compptr->v_samp_factor, TRUE);
+      if (y_crop_blocks + dst_blk_y < comp_height) {
+        /* Row is within the vertically mirrorable area. */
+        src_buffer = (*srcinfo->mem->access_virt_barray)
+          ((j_common_ptr)srcinfo, src_coef_arrays[ci],
+           comp_height - y_crop_blocks - dst_blk_y -
+           (JDIMENSION)compptr->v_samp_factor,
+           (JDIMENSION)compptr->v_samp_factor, FALSE);
+      } else {
+        /* Bottom-edge rows are only mirrored horizontally. */
+        src_buffer = (*srcinfo->mem->access_virt_barray)
+          ((j_common_ptr)srcinfo, src_coef_arrays[ci],
+           dst_blk_y + y_crop_blocks,
+           (JDIMENSION)compptr->v_samp_factor, FALSE);
+      }
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+        dst_row_ptr = dst_buffer[offset_y];
+        if (y_crop_blocks + dst_blk_y < comp_height) {
+          /* Row is within the mirrorable area. */
+          src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1];
+          for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
+               dst_blk_x++) {
+            dst_ptr = dst_row_ptr[dst_blk_x];
+            if (x_crop_blocks + dst_blk_x < comp_width) {
+              /* Process the blocks that can be mirrored both ways. */
+              src_ptr =
+                src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1];
+              for (i = 0; i < DCTSIZE; i += 2) {
+                /* For even row, negate every odd column. */
+                for (j = 0; j < DCTSIZE; j += 2) {
+                  *dst_ptr++ = *src_ptr++;
+                  *dst_ptr++ = -(*src_ptr++);
+                }
+                /* For odd row, negate every even column. */
+                for (j = 0; j < DCTSIZE; j += 2) {
+                  *dst_ptr++ = -(*src_ptr++);
+                  *dst_ptr++ = *src_ptr++;
+                }
+              }
+            } else {
+              /* Any remaining right-edge blocks are only mirrored vertically. */
+              src_ptr = src_row_ptr[x_crop_blocks + dst_blk_x];
+              for (i = 0; i < DCTSIZE; i += 2) {
+                for (j = 0; j < DCTSIZE; j++)
+                  *dst_ptr++ = *src_ptr++;
+                for (j = 0; j < DCTSIZE; j++)
+                  *dst_ptr++ = -(*src_ptr++);
+              }
+            }
+          }
+        } else {
+          /* Remaining rows are just mirrored horizontally. */
+          src_row_ptr = src_buffer[offset_y];
+          for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
+               dst_blk_x++) {
+            if (x_crop_blocks + dst_blk_x < comp_width) {
+              /* Process the blocks that can be mirrored. */
+              dst_ptr = dst_row_ptr[dst_blk_x];
+              src_ptr =
+                src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1];
+              for (i = 0; i < DCTSIZE2; i += 2) {
+                *dst_ptr++ = *src_ptr++;
+                *dst_ptr++ = -(*src_ptr++);
+              }
+            } else {
+              /* Any remaining right-edge blocks are only copied. */
+              jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks,
+                              dst_row_ptr + dst_blk_x, (JDIMENSION)1);
+            }
+          }
+        }
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_transverse(j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+              JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+              jvirt_barray_ptr *src_coef_arrays,
+              jvirt_barray_ptr *dst_coef_arrays)
+/* Transverse transpose is equivalent to
+ *   1. 180 degree rotation;
+ *   2. Transposition;
+ * or
+ *   1. Horizontal mirroring;
+ *   2. Transposition;
+ *   3. Horizontal mirroring.
+ * These steps are merged into a single processing routine.
+ */
+{
+  JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
+  int ci, i, j, offset_x, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  MCU_cols = srcinfo->output_height /
+             (dstinfo->max_h_samp_factor * dstinfo_min_DCT_h_scaled_size);
+  MCU_rows = srcinfo->output_width /
+             (dstinfo->max_v_samp_factor * dstinfo_min_DCT_v_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+         dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+        ((j_common_ptr)srcinfo, dst_coef_arrays[ci], dst_blk_y,
+         (JDIMENSION)compptr->v_samp_factor, TRUE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+        for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
+             dst_blk_x += compptr->h_samp_factor) {
+          if (x_crop_blocks + dst_blk_x < comp_width) {
+            /* Block is within the mirrorable area. */
+            src_buffer = (*srcinfo->mem->access_virt_barray)
+              ((j_common_ptr)srcinfo, src_coef_arrays[ci],
+               comp_width - x_crop_blocks - dst_blk_x -
+               (JDIMENSION)compptr->h_samp_factor,
+               (JDIMENSION)compptr->h_samp_factor, FALSE);
+          } else {
+            src_buffer = (*srcinfo->mem->access_virt_barray)
+              ((j_common_ptr)srcinfo, src_coef_arrays[ci],
+               dst_blk_x + x_crop_blocks,
+               (JDIMENSION)compptr->h_samp_factor, FALSE);
+          }
+          for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
+            dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+            if (y_crop_blocks + dst_blk_y < comp_height) {
+              if (x_crop_blocks + dst_blk_x < comp_width) {
+                /* Block is within the mirrorable area. */
+                src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1]
+                  [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1];
+                for (i = 0; i < DCTSIZE; i++) {
+                  for (j = 0; j < DCTSIZE; j++) {
+                    dst_ptr[j * DCTSIZE + i] = src_ptr[i * DCTSIZE + j];
+                    j++;
+                    dst_ptr[j * DCTSIZE + i] = -src_ptr[i * DCTSIZE + j];
+                  }
+                  i++;
+                  for (j = 0; j < DCTSIZE; j++) {
+                    dst_ptr[j * DCTSIZE + i] = -src_ptr[i * DCTSIZE + j];
+                    j++;
+                    dst_ptr[j * DCTSIZE + i] = src_ptr[i * DCTSIZE + j];
+                  }
+                }
+              } else {
+                /* Right-edge blocks are mirrored in y only */
+                src_ptr = src_buffer[offset_x]
+                  [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1];
+                for (i = 0; i < DCTSIZE; i++) {
+                  for (j = 0; j < DCTSIZE; j++) {
+                    dst_ptr[j * DCTSIZE + i] = src_ptr[i * DCTSIZE + j];
+                    j++;
+                    dst_ptr[j * DCTSIZE + i] = -src_ptr[i * DCTSIZE + j];
+                  }
+                }
+              }
+            } else {
+              if (x_crop_blocks + dst_blk_x < comp_width) {
+                /* Bottom-edge blocks are mirrored in x only */
+                src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1]
+                  [dst_blk_y + offset_y + y_crop_blocks];
+                for (i = 0; i < DCTSIZE; i++) {
+                  for (j = 0; j < DCTSIZE; j++)
+                    dst_ptr[j * DCTSIZE + i] = src_ptr[i * DCTSIZE + j];
+                  i++;
+                  for (j = 0; j < DCTSIZE; j++)
+                    dst_ptr[j * DCTSIZE + i] = -src_ptr[i * DCTSIZE + j];
+                }
+              } else {
+                /* At lower right corner, just transpose, no mirroring */
+                src_ptr = src_buffer[offset_x]
+                  [dst_blk_y + offset_y + y_crop_blocks];
+                for (i = 0; i < DCTSIZE; i++)
+                  for (j = 0; j < DCTSIZE; j++)
+                    dst_ptr[j * DCTSIZE + i] = src_ptr[i * DCTSIZE + j];
+              }
+            }
+          }
+        }
+      }
+    }
+  }
+}
+
+
+/* Parse an unsigned integer: subroutine for jtransform_parse_crop_spec.
+ * Returns TRUE if valid integer found, FALSE if not.
+ * *strptr is advanced over the digit string, and *result is set to its value.
+ */
+
+LOCAL(boolean)
+jt_read_integer(const char **strptr, JDIMENSION *result)
+{
+  const char *ptr = *strptr;
+  JDIMENSION val = 0;
+
+  for (; isdigit(*ptr); ptr++) {
+    val = val * 10 + (JDIMENSION)(*ptr - '0');
+  }
+  *result = val;
+  if (ptr == *strptr)
+    return FALSE;               /* oops, no digits */
+  *strptr = ptr;
+  return TRUE;
+}
+
+
+/* Parse a crop specification (written in X11 geometry style).
+ * The routine returns TRUE if the spec string is valid, FALSE if not.
+ *
+ * The crop spec string should have the format
+ *      <width>[{fr}]x<height>[{fr}]{+-}<xoffset>{+-}<yoffset>
+ * where width, height, xoffset, and yoffset are unsigned integers.
+ * Each of the elements can be omitted to indicate a default value.
+ * (A weakness of this style is that it is not possible to omit xoffset
+ * while specifying yoffset, since they look alike.)
+ *
+ * This code is loosely based on XParseGeometry from the X11 distribution.
+ */
+
+GLOBAL(boolean)
+jtransform_parse_crop_spec(jpeg_transform_info *info, const char *spec)
+{
+  info->crop = FALSE;
+  info->crop_width_set = JCROP_UNSET;
+  info->crop_height_set = JCROP_UNSET;
+  info->crop_xoffset_set = JCROP_UNSET;
+  info->crop_yoffset_set = JCROP_UNSET;
+
+  if (isdigit(*spec)) {
+    /* fetch width */
+    if (!jt_read_integer(&spec, &info->crop_width))
+      return FALSE;
+    if (*spec == 'f' || *spec == 'F') {
+      spec++;
+      info->crop_width_set = JCROP_FORCE;
+    } else if (*spec == 'r' || *spec == 'R') {
+      spec++;
+      info->crop_width_set = JCROP_REFLECT;
+    } else
+      info->crop_width_set = JCROP_POS;
+  }
+  if (*spec == 'x' || *spec == 'X') {
+    /* fetch height */
+    spec++;
+    if (!jt_read_integer(&spec, &info->crop_height))
+      return FALSE;
+    if (*spec == 'f' || *spec == 'F') {
+      spec++;
+      info->crop_height_set = JCROP_FORCE;
+    } else if (*spec == 'r' || *spec == 'R') {
+      spec++;
+      info->crop_height_set = JCROP_REFLECT;
+    } else
+      info->crop_height_set = JCROP_POS;
+  }
+  if (*spec == '+' || *spec == '-') {
+    /* fetch xoffset */
+    info->crop_xoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS;
+    spec++;
+    if (!jt_read_integer(&spec, &info->crop_xoffset))
+      return FALSE;
+  }
+  if (*spec == '+' || *spec == '-') {
+    /* fetch yoffset */
+    info->crop_yoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS;
+    spec++;
+    if (!jt_read_integer(&spec, &info->crop_yoffset))
+      return FALSE;
+  }
+  /* We had better have gotten to the end of the string. */
+  if (*spec != '\0')
+    return FALSE;
+  info->crop = TRUE;
+  return TRUE;
+}
+
+
+/* Trim off any partial iMCUs on the indicated destination edge */
+
+LOCAL(void)
+trim_right_edge(jpeg_transform_info *info, JDIMENSION full_width)
+{
+  JDIMENSION MCU_cols;
+
+  MCU_cols = info->output_width / info->iMCU_sample_width;
+  if (MCU_cols > 0 && info->x_crop_offset + MCU_cols ==
+      full_width / info->iMCU_sample_width)
+    info->output_width = MCU_cols * info->iMCU_sample_width;
+}
+
+LOCAL(void)
+trim_bottom_edge(jpeg_transform_info *info, JDIMENSION full_height)
+{
+  JDIMENSION MCU_rows;
+
+  MCU_rows = info->output_height / info->iMCU_sample_height;
+  if (MCU_rows > 0 && info->y_crop_offset + MCU_rows ==
+      full_height / info->iMCU_sample_height)
+    info->output_height = MCU_rows * info->iMCU_sample_height;
+}
+
+
+/* Request any required workspace.
+ *
+ * This routine figures out the size that the output image will be
+ * (which implies that all the transform parameters must be set before
+ * it is called).
+ *
+ * We allocate the workspace virtual arrays from the source decompression
+ * object, so that all the arrays (both the original data and the workspace)
+ * will be taken into account while making memory management decisions.
+ * Hence, this routine must be called after jpeg_read_header (which reads
+ * the image dimensions) and before jpeg_read_coefficients (which realizes
+ * the source's virtual arrays).
+ *
+ * This function returns FALSE right away if -perfect is given
+ * and transformation is not perfect.  Otherwise returns TRUE.
+ */
+
+GLOBAL(boolean)
+jtransform_request_workspace(j_decompress_ptr srcinfo,
+                             jpeg_transform_info *info)
+{
+  jvirt_barray_ptr *coef_arrays;
+  boolean need_workspace, transpose_it;
+  jpeg_component_info *compptr;
+  JDIMENSION xoffset, yoffset, dtemp;
+  JDIMENSION width_in_iMCUs, height_in_iMCUs;
+  JDIMENSION width_in_blocks, height_in_blocks;
+  int itemp, ci, h_samp_factor, v_samp_factor;
+
+  /* Determine number of components in output image */
+  if (info->force_grayscale &&
+      srcinfo->jpeg_color_space == JCS_YCbCr &&
+      srcinfo->num_components == 3)
+    /* We'll only process the first component */
+    info->num_components = 1;
+  else
+    /* Process all the components */
+    info->num_components = srcinfo->num_components;
+
+  /* Compute output image dimensions and related values. */
+#if JPEG_LIB_VERSION >= 80
+  jpeg_core_output_dimensions(srcinfo);
+#else
+  srcinfo->output_width = srcinfo->image_width;
+  srcinfo->output_height = srcinfo->image_height;
+#endif
+
+  /* Return right away if -perfect is given and transformation is not perfect.
+   */
+  if (info->perfect) {
+    if (info->num_components == 1) {
+      if (!jtransform_perfect_transform(srcinfo->output_width,
+          srcinfo->output_height,
+          srcinfo->_min_DCT_h_scaled_size,
+          srcinfo->_min_DCT_v_scaled_size,
+          info->transform))
+        return FALSE;
+    } else {
+      if (!jtransform_perfect_transform(srcinfo->output_width,
+          srcinfo->output_height,
+          srcinfo->max_h_samp_factor * srcinfo->_min_DCT_h_scaled_size,
+          srcinfo->max_v_samp_factor * srcinfo->_min_DCT_v_scaled_size,
+          info->transform))
+        return FALSE;
+    }
+  }
+
+  /* If there is only one output component, force the iMCU size to be 1;
+   * else use the source iMCU size.  (This allows us to do the right thing
+   * when reducing color to grayscale, and also provides a handy way of
+   * cleaning up "funny" grayscale images whose sampling factors are not 1x1.)
+   */
+  switch (info->transform) {
+  case JXFORM_TRANSPOSE:
+  case JXFORM_TRANSVERSE:
+  case JXFORM_ROT_90:
+  case JXFORM_ROT_270:
+    info->output_width = srcinfo->output_height;
+    info->output_height = srcinfo->output_width;
+    if (info->num_components == 1) {
+      info->iMCU_sample_width = srcinfo->_min_DCT_v_scaled_size;
+      info->iMCU_sample_height = srcinfo->_min_DCT_h_scaled_size;
+    } else {
+      info->iMCU_sample_width =
+        srcinfo->max_v_samp_factor * srcinfo->_min_DCT_v_scaled_size;
+      info->iMCU_sample_height =
+        srcinfo->max_h_samp_factor * srcinfo->_min_DCT_h_scaled_size;
+    }
+    break;
+  default:
+    info->output_width = srcinfo->output_width;
+    info->output_height = srcinfo->output_height;
+    if (info->num_components == 1) {
+      info->iMCU_sample_width = srcinfo->_min_DCT_h_scaled_size;
+      info->iMCU_sample_height = srcinfo->_min_DCT_v_scaled_size;
+    } else {
+      info->iMCU_sample_width =
+        srcinfo->max_h_samp_factor * srcinfo->_min_DCT_h_scaled_size;
+      info->iMCU_sample_height =
+        srcinfo->max_v_samp_factor * srcinfo->_min_DCT_v_scaled_size;
+    }
+    break;
+  }
+
+  /* If cropping has been requested, compute the crop area's position and
+   * dimensions, ensuring that its upper left corner falls at an iMCU boundary.
+   */
+  if (info->crop) {
+    /* Insert default values for unset crop parameters */
+    if (info->crop_xoffset_set == JCROP_UNSET)
+      info->crop_xoffset = 0;   /* default to +0 */
+    if (info->crop_yoffset_set == JCROP_UNSET)
+      info->crop_yoffset = 0;   /* default to +0 */
+    if (info->crop_width_set == JCROP_UNSET) {
+      if (info->crop_xoffset >= info->output_width)
+        ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
+      info->crop_width = info->output_width - info->crop_xoffset;
+    } else {
+      /* Check for crop extension */
+      if (info->crop_width > info->output_width) {
+        /* Crop extension does not work when transforming! */
+        if (info->transform != JXFORM_NONE ||
+            info->crop_xoffset >= info->crop_width ||
+            info->crop_xoffset > info->crop_width - info->output_width)
+          ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
+      } else {
+        if (info->crop_xoffset >= info->output_width ||
+            info->crop_width <= 0 ||
+            info->crop_xoffset > info->output_width - info->crop_width)
+          ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
+      }
+    }
+    if (info->crop_height_set == JCROP_UNSET) {
+      if (info->crop_yoffset >= info->output_height)
+        ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
+      info->crop_height = info->output_height - info->crop_yoffset;
+    } else {
+      /* Check for crop extension */
+      if (info->crop_height > info->output_height) {
+        /* Crop extension does not work when transforming! */
+        if (info->transform != JXFORM_NONE ||
+            info->crop_yoffset >= info->crop_height ||
+            info->crop_yoffset > info->crop_height - info->output_height)
+          ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
+      } else {
+        if (info->crop_yoffset >= info->output_height ||
+            info->crop_height <= 0 ||
+            info->crop_yoffset > info->output_height - info->crop_height)
+          ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
+      }
+    }
+    /* Convert negative crop offsets into regular offsets */
+    if (info->crop_xoffset_set != JCROP_NEG)
+      xoffset = info->crop_xoffset;
+    else if (info->crop_width > info->output_width) /* crop extension */
+      xoffset = info->crop_width - info->output_width - info->crop_xoffset;
+    else
+      xoffset = info->output_width - info->crop_width - info->crop_xoffset;
+    if (info->crop_yoffset_set != JCROP_NEG)
+      yoffset = info->crop_yoffset;
+    else if (info->crop_height > info->output_height) /* crop extension */
+      yoffset = info->crop_height - info->output_height - info->crop_yoffset;
+    else
+      yoffset = info->output_height - info->crop_height - info->crop_yoffset;
+    /* Now adjust so that upper left corner falls at an iMCU boundary */
+    switch (info->transform) {
+    case JXFORM_DROP:
+      /* Ensure the effective drop region will not exceed the requested */
+      itemp = info->iMCU_sample_width;
+      dtemp = itemp - 1 - ((xoffset + itemp - 1) % itemp);
+      xoffset += dtemp;
+      if (info->crop_width <= dtemp)
+        info->drop_width = 0;
+      else if (xoffset + info->crop_width - dtemp == info->output_width)
+        /* Matching right edge: include partial iMCU */
+        info->drop_width = (info->crop_width - dtemp + itemp - 1) / itemp;
+      else
+        info->drop_width = (info->crop_width - dtemp) / itemp;
+      itemp = info->iMCU_sample_height;
+      dtemp = itemp - 1 - ((yoffset + itemp - 1) % itemp);
+      yoffset += dtemp;
+      if (info->crop_height <= dtemp)
+        info->drop_height = 0;
+      else if (yoffset + info->crop_height - dtemp == info->output_height)
+        /* Matching bottom edge: include partial iMCU */
+        info->drop_height = (info->crop_height - dtemp + itemp - 1) / itemp;
+      else
+        info->drop_height = (info->crop_height - dtemp) / itemp;
+      /* Check if sampling factors match for dropping */
+      if (info->drop_width != 0 && info->drop_height != 0)
+        for (ci = 0; ci < info->num_components &&
+                     ci < info->drop_ptr->num_components; ci++) {
+          if (info->drop_ptr->comp_info[ci].h_samp_factor *
+              srcinfo->max_h_samp_factor !=
+              srcinfo->comp_info[ci].h_samp_factor *
+              info->drop_ptr->max_h_samp_factor)
+            ERREXIT6(srcinfo, JERR_BAD_DROP_SAMPLING, ci,
+              info->drop_ptr->comp_info[ci].h_samp_factor,
+              info->drop_ptr->max_h_samp_factor,
+              srcinfo->comp_info[ci].h_samp_factor,
+              srcinfo->max_h_samp_factor, 'h');
+          if (info->drop_ptr->comp_info[ci].v_samp_factor *
+              srcinfo->max_v_samp_factor !=
+              srcinfo->comp_info[ci].v_samp_factor *
+              info->drop_ptr->max_v_samp_factor)
+            ERREXIT6(srcinfo, JERR_BAD_DROP_SAMPLING, ci,
+              info->drop_ptr->comp_info[ci].v_samp_factor,
+              info->drop_ptr->max_v_samp_factor,
+              srcinfo->comp_info[ci].v_samp_factor,
+              srcinfo->max_v_samp_factor, 'v');
+        }
+      break;
+    case JXFORM_WIPE:
+      /* Ensure the effective wipe region will cover the requested */
+      info->drop_width = (JDIMENSION)jdiv_round_up
+        ((long)(info->crop_width + (xoffset % info->iMCU_sample_width)),
+         (long)info->iMCU_sample_width);
+      info->drop_height = (JDIMENSION)jdiv_round_up
+        ((long)(info->crop_height + (yoffset % info->iMCU_sample_height)),
+         (long)info->iMCU_sample_height);
+      break;
+    default:
+      /* Ensure the effective crop region will cover the requested */
+      if (info->crop_width_set == JCROP_FORCE ||
+          info->crop_width > info->output_width)
+        info->output_width = info->crop_width;
+      else
+        info->output_width =
+          info->crop_width + (xoffset % info->iMCU_sample_width);
+      if (info->crop_height_set == JCROP_FORCE ||
+          info->crop_height > info->output_height)
+        info->output_height = info->crop_height;
+      else
+        info->output_height =
+          info->crop_height + (yoffset % info->iMCU_sample_height);
+    }
+    /* Save x/y offsets measured in iMCUs */
+    info->x_crop_offset = xoffset / info->iMCU_sample_width;
+    info->y_crop_offset = yoffset / info->iMCU_sample_height;
+  } else {
+    info->x_crop_offset = 0;
+    info->y_crop_offset = 0;
+  }
+
+  /* Figure out whether we need workspace arrays,
+   * and if so whether they are transposed relative to the source.
+   */
+  need_workspace = FALSE;
+  transpose_it = FALSE;
+  switch (info->transform) {
+  case JXFORM_NONE:
+    if (info->x_crop_offset != 0 || info->y_crop_offset != 0 ||
+        info->output_width > srcinfo->output_width ||
+        info->output_height > srcinfo->output_height)
+      need_workspace = TRUE;
+    /* No workspace needed if neither cropping nor transforming */
+    break;
+  case JXFORM_FLIP_H:
+    if (info->trim)
+      trim_right_edge(info, srcinfo->output_width);
+    if (info->y_crop_offset != 0 || info->slow_hflip)
+      need_workspace = TRUE;
+    /* do_flip_h_no_crop doesn't need a workspace array */
+    break;
+  case JXFORM_FLIP_V:
+    if (info->trim)
+      trim_bottom_edge(info, srcinfo->output_height);
+    /* Need workspace arrays having same dimensions as source image. */
+    need_workspace = TRUE;
+    break;
+  case JXFORM_TRANSPOSE:
+    /* transpose does NOT have to trim anything */
+    /* Need workspace arrays having transposed dimensions. */
+    need_workspace = TRUE;
+    transpose_it = TRUE;
+    break;
+  case JXFORM_TRANSVERSE:
+    if (info->trim) {
+      trim_right_edge(info, srcinfo->output_height);
+      trim_bottom_edge(info, srcinfo->output_width);
+    }
+    /* Need workspace arrays having transposed dimensions. */
+    need_workspace = TRUE;
+    transpose_it = TRUE;
+    break;
+  case JXFORM_ROT_90:
+    if (info->trim)
+      trim_right_edge(info, srcinfo->output_height);
+    /* Need workspace arrays having transposed dimensions. */
+    need_workspace = TRUE;
+    transpose_it = TRUE;
+    break;
+  case JXFORM_ROT_180:
+    if (info->trim) {
+      trim_right_edge(info, srcinfo->output_width);
+      trim_bottom_edge(info, srcinfo->output_height);
+    }
+    /* Need workspace arrays having same dimensions as source image. */
+    need_workspace = TRUE;
+    break;
+  case JXFORM_ROT_270:
+    if (info->trim)
+      trim_bottom_edge(info, srcinfo->output_width);
+    /* Need workspace arrays having transposed dimensions. */
+    need_workspace = TRUE;
+    transpose_it = TRUE;
+    break;
+  case JXFORM_WIPE:
+    break;
+  case JXFORM_DROP:
+    break;
+  }
+
+  /* Allocate workspace if needed.
+   * Note that we allocate arrays padded out to the next iMCU boundary,
+   * so that transform routines need not worry about missing edge blocks.
+   */
+  if (need_workspace) {
+    coef_arrays = (jvirt_barray_ptr *)
+      (*srcinfo->mem->alloc_small) ((j_common_ptr)srcinfo, JPOOL_IMAGE,
+                sizeof(jvirt_barray_ptr) * info->num_components);
+    width_in_iMCUs = (JDIMENSION)
+      jdiv_round_up((long)info->output_width, (long)info->iMCU_sample_width);
+    height_in_iMCUs = (JDIMENSION)
+      jdiv_round_up((long)info->output_height, (long)info->iMCU_sample_height);
+    for (ci = 0; ci < info->num_components; ci++) {
+      compptr = srcinfo->comp_info + ci;
+      if (info->num_components == 1) {
+        /* we're going to force samp factors to 1x1 in this case */
+        h_samp_factor = v_samp_factor = 1;
+      } else if (transpose_it) {
+        h_samp_factor = compptr->v_samp_factor;
+        v_samp_factor = compptr->h_samp_factor;
+      } else {
+        h_samp_factor = compptr->h_samp_factor;
+        v_samp_factor = compptr->v_samp_factor;
+      }
+      width_in_blocks = width_in_iMCUs * h_samp_factor;
+      height_in_blocks = height_in_iMCUs * v_samp_factor;
+      coef_arrays[ci] = (*srcinfo->mem->request_virt_barray)
+        ((j_common_ptr)srcinfo, JPOOL_IMAGE, FALSE,
+         width_in_blocks, height_in_blocks, (JDIMENSION)v_samp_factor);
+    }
+    info->workspace_coef_arrays = coef_arrays;
+  } else
+    info->workspace_coef_arrays = NULL;
+
+  return TRUE;
+}
+
+
+/* Transpose destination image parameters */
+
+LOCAL(void)
+transpose_critical_parameters(j_compress_ptr dstinfo)
+{
+  int tblno, i, j, ci, itemp;
+  jpeg_component_info *compptr;
+  JQUANT_TBL *qtblptr;
+  JDIMENSION jtemp;
+  UINT16 qtemp;
+
+  /* Transpose image dimensions */
+  jtemp = dstinfo->image_width;
+  dstinfo->image_width = dstinfo->image_height;
+  dstinfo->image_height = jtemp;
+#if JPEG_LIB_VERSION >= 70
+  itemp = dstinfo->min_DCT_h_scaled_size;
+  dstinfo->min_DCT_h_scaled_size = dstinfo->min_DCT_v_scaled_size;
+  dstinfo->min_DCT_v_scaled_size = itemp;
+#endif
+
+  /* Transpose sampling factors */
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    itemp = compptr->h_samp_factor;
+    compptr->h_samp_factor = compptr->v_samp_factor;
+    compptr->v_samp_factor = itemp;
+  }
+
+  /* Transpose quantization tables */
+  for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) {
+    qtblptr = dstinfo->quant_tbl_ptrs[tblno];
+    if (qtblptr != NULL) {
+      for (i = 0; i < DCTSIZE; i++) {
+        for (j = 0; j < i; j++) {
+          qtemp = qtblptr->quantval[i * DCTSIZE + j];
+          qtblptr->quantval[i * DCTSIZE + j] =
+            qtblptr->quantval[j * DCTSIZE + i];
+          qtblptr->quantval[j * DCTSIZE + i] = qtemp;
+        }
+      }
+    }
+  }
+}
+
+
+/* Adjust Exif image parameters.
+ *
+ * We try to adjust the Tags ExifImageWidth and ExifImageHeight if possible.
+ */
+
+LOCAL(void)
+adjust_exif_parameters(JOCTET *data, unsigned int length, JDIMENSION new_width,
+                       JDIMENSION new_height)
+{
+  boolean is_motorola; /* Flag for byte order */
+  unsigned int number_of_tags, tagnum;
+  unsigned int firstoffset, offset;
+  JDIMENSION new_value;
+
+  if (length < 12) return; /* Length of an IFD entry */
+
+  /* Discover byte order */
+  if (data[0] == 0x49 && data[1] == 0x49)
+    is_motorola = FALSE;
+  else if (data[0] == 0x4D && data[1] == 0x4D)
+    is_motorola = TRUE;
+  else
+    return;
+
+  /* Check Tag Mark */
+  if (is_motorola) {
+    if (data[2] != 0) return;
+    if (data[3] != 0x2A) return;
+  } else {
+    if (data[3] != 0) return;
+    if (data[2] != 0x2A) return;
+  }
+
+  /* Get first IFD offset (offset to IFD0) */
+  if (is_motorola) {
+    if (data[4] != 0) return;
+    if (data[5] != 0) return;
+    firstoffset = data[6];
+    firstoffset <<= 8;
+    firstoffset += data[7];
+  } else {
+    if (data[7] != 0) return;
+    if (data[6] != 0) return;
+    firstoffset = data[5];
+    firstoffset <<= 8;
+    firstoffset += data[4];
+  }
+  if (firstoffset > length - 2) return; /* check end of data segment */
+
+  /* Get the number of directory entries contained in this IFD */
+  if (is_motorola) {
+    number_of_tags = data[firstoffset];
+    number_of_tags <<= 8;
+    number_of_tags += data[firstoffset + 1];
+  } else {
+    number_of_tags = data[firstoffset + 1];
+    number_of_tags <<= 8;
+    number_of_tags += data[firstoffset];
+  }
+  if (number_of_tags == 0) return;
+  firstoffset += 2;
+
+  /* Search for ExifSubIFD offset Tag in IFD0 */
+  for (;;) {
+    if (firstoffset > length - 12) return; /* check end of data segment */
+    /* Get Tag number */
+    if (is_motorola) {
+      tagnum = data[firstoffset];
+      tagnum <<= 8;
+      tagnum += data[firstoffset + 1];
+    } else {
+      tagnum = data[firstoffset + 1];
+      tagnum <<= 8;
+      tagnum += data[firstoffset];
+    }
+    if (tagnum == 0x8769) break; /* found ExifSubIFD offset Tag */
+    if (--number_of_tags == 0) return;
+    firstoffset += 12;
+  }
+
+  /* Get the ExifSubIFD offset */
+  if (is_motorola) {
+    if (data[firstoffset + 8] != 0) return;
+    if (data[firstoffset + 9] != 0) return;
+    offset = data[firstoffset + 10];
+    offset <<= 8;
+    offset += data[firstoffset + 11];
+  } else {
+    if (data[firstoffset + 11] != 0) return;
+    if (data[firstoffset + 10] != 0) return;
+    offset = data[firstoffset + 9];
+    offset <<= 8;
+    offset += data[firstoffset + 8];
+  }
+  if (offset > length - 2) return; /* check end of data segment */
+
+  /* Get the number of directory entries contained in this SubIFD */
+  if (is_motorola) {
+    number_of_tags = data[offset];
+    number_of_tags <<= 8;
+    number_of_tags += data[offset + 1];
+  } else {
+    number_of_tags = data[offset + 1];
+    number_of_tags <<= 8;
+    number_of_tags += data[offset];
+  }
+  if (number_of_tags < 2) return;
+  offset += 2;
+
+  /* Search for ExifImageWidth and ExifImageHeight Tags in this SubIFD */
+  do {
+    if (offset > length - 12) return; /* check end of data segment */
+    /* Get Tag number */
+    if (is_motorola) {
+      tagnum = data[offset];
+      tagnum <<= 8;
+      tagnum += data[offset + 1];
+    } else {
+      tagnum = data[offset + 1];
+      tagnum <<= 8;
+      tagnum += data[offset];
+    }
+    if (tagnum == 0xA002 || tagnum == 0xA003) {
+      if (tagnum == 0xA002)
+        new_value = new_width; /* ExifImageWidth Tag */
+      else
+        new_value = new_height; /* ExifImageHeight Tag */
+      if (is_motorola) {
+        data[offset + 2] = 0; /* Format = unsigned long (4 octets) */
+        data[offset + 3] = 4;
+        data[offset + 4] = 0; /* Number Of Components = 1 */
+        data[offset + 5] = 0;
+        data[offset + 6] = 0;
+        data[offset + 7] = 1;
+        data[offset + 8] = 0;
+        data[offset + 9] = 0;
+        data[offset + 10] = (JOCTET)((new_value >> 8) & 0xFF);
+        data[offset + 11] = (JOCTET)(new_value & 0xFF);
+      } else {
+        data[offset + 2] = 4; /* Format = unsigned long (4 octets) */
+        data[offset + 3] = 0;
+        data[offset + 4] = 1; /* Number Of Components = 1 */
+        data[offset + 5] = 0;
+        data[offset + 6] = 0;
+        data[offset + 7] = 0;
+        data[offset + 8] = (JOCTET)(new_value & 0xFF);
+        data[offset + 9] = (JOCTET)((new_value >> 8) & 0xFF);
+        data[offset + 10] = 0;
+        data[offset + 11] = 0;
+      }
+    }
+    offset += 12;
+  } while (--number_of_tags);
+}
+
+
+/* Adjust output image parameters as needed.
+ *
+ * This must be called after jpeg_copy_critical_parameters()
+ * and before jpeg_write_coefficients().
+ *
+ * The return value is the set of virtual coefficient arrays to be written
+ * (either the ones allocated by jtransform_request_workspace, or the
+ * original source data arrays).  The caller will need to pass this value
+ * to jpeg_write_coefficients().
+ */
+
+GLOBAL(jvirt_barray_ptr *)
+jtransform_adjust_parameters(j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+                             jvirt_barray_ptr *src_coef_arrays,
+                             jpeg_transform_info *info)
+{
+  /* If force-to-grayscale is requested, adjust destination parameters */
+  if (info->force_grayscale) {
+    /* First, ensure we have YCbCr or grayscale data, and that the source's
+     * Y channel is full resolution.  (No reasonable person would make Y
+     * be less than full resolution, so actually coping with that case
+     * isn't worth extra code space.  But we check it to avoid crashing.)
+     */
+    if (((dstinfo->jpeg_color_space == JCS_YCbCr &&
+          dstinfo->num_components == 3) ||
+         (dstinfo->jpeg_color_space == JCS_GRAYSCALE &&
+          dstinfo->num_components == 1)) &&
+        srcinfo->comp_info[0].h_samp_factor == srcinfo->max_h_samp_factor &&
+        srcinfo->comp_info[0].v_samp_factor == srcinfo->max_v_samp_factor) {
+      /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed
+       * properly.  Among other things, it sets the target h_samp_factor &
+       * v_samp_factor to 1, which typically won't match the source.
+       * We have to preserve the source's quantization table number, however.
+       */
+      int sv_quant_tbl_no = dstinfo->comp_info[0].quant_tbl_no;
+      jpeg_set_colorspace(dstinfo, JCS_GRAYSCALE);
+      dstinfo->comp_info[0].quant_tbl_no = sv_quant_tbl_no;
+    } else {
+      /* Sorry, can't do it */
+      ERREXIT(dstinfo, JERR_CONVERSION_NOTIMPL);
+    }
+  } else if (info->num_components == 1) {
+    /* For a single-component source, we force the destination sampling factors
+     * to 1x1, with or without force_grayscale.  This is useful because some
+     * decoders choke on grayscale images with other sampling factors.
+     */
+    dstinfo->comp_info[0].h_samp_factor = 1;
+    dstinfo->comp_info[0].v_samp_factor = 1;
+  }
+
+  /* Correct the destination's image dimensions as necessary
+   * for rotate/flip, resize, and crop operations.
+   */
+#if JPEG_LIB_VERSION >= 80
+  dstinfo->jpeg_width = info->output_width;
+  dstinfo->jpeg_height = info->output_height;
+#endif
+
+  /* Transpose destination image parameters, adjust quantization */
+  switch (info->transform) {
+  case JXFORM_TRANSPOSE:
+  case JXFORM_TRANSVERSE:
+  case JXFORM_ROT_90:
+  case JXFORM_ROT_270:
+#if JPEG_LIB_VERSION < 80
+    dstinfo->image_width = info->output_height;
+    dstinfo->image_height = info->output_width;
+#endif
+    transpose_critical_parameters(dstinfo);
+    break;
+  case JXFORM_DROP:
+    if (info->drop_width != 0 && info->drop_height != 0)
+      adjust_quant(srcinfo, src_coef_arrays,
+                   info->drop_ptr, info->drop_coef_arrays,
+                   info->trim, dstinfo);
+    break;
+  default:
+#if JPEG_LIB_VERSION < 80
+    dstinfo->image_width = info->output_width;
+    dstinfo->image_height = info->output_height;
+#endif
+    break;
+  }
+
+  /* Adjust Exif properties */
+  if (srcinfo->marker_list != NULL &&
+      srcinfo->marker_list->marker == JPEG_APP0 + 1 &&
+      srcinfo->marker_list->data_length >= 6 &&
+      srcinfo->marker_list->data[0] == 0x45 &&
+      srcinfo->marker_list->data[1] == 0x78 &&
+      srcinfo->marker_list->data[2] == 0x69 &&
+      srcinfo->marker_list->data[3] == 0x66 &&
+      srcinfo->marker_list->data[4] == 0 &&
+      srcinfo->marker_list->data[5] == 0) {
+    /* Suppress output of JFIF marker */
+    dstinfo->write_JFIF_header = FALSE;
+    /* Adjust Exif image parameters */
+#if JPEG_LIB_VERSION >= 80
+    if (dstinfo->jpeg_width != srcinfo->image_width ||
+        dstinfo->jpeg_height != srcinfo->image_height)
+      /* Align data segment to start of TIFF structure for parsing */
+      adjust_exif_parameters(srcinfo->marker_list->data + 6,
+                             srcinfo->marker_list->data_length - 6,
+                             dstinfo->jpeg_width, dstinfo->jpeg_height);
+#else
+    if (dstinfo->image_width != srcinfo->image_width ||
+        dstinfo->image_height != srcinfo->image_height)
+      /* Align data segment to start of TIFF structure for parsing */
+      adjust_exif_parameters(srcinfo->marker_list->data + 6,
+                             srcinfo->marker_list->data_length - 6,
+                             dstinfo->image_width, dstinfo->image_height);
+#endif
+  }
+
+  /* Return the appropriate output data set */
+  if (info->workspace_coef_arrays != NULL)
+    return info->workspace_coef_arrays;
+  return src_coef_arrays;
+}
+
+
+/* Execute the actual transformation, if any.
+ *
+ * This must be called *after* jpeg_write_coefficients, because it depends
+ * on jpeg_write_coefficients to have computed subsidiary values such as
+ * the per-component width and height fields in the destination object.
+ *
+ * Note that some transformations will modify the source data arrays!
+ */
+
+GLOBAL(void)
+jtransform_execute_transform(j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+                             jvirt_barray_ptr *src_coef_arrays,
+                             jpeg_transform_info *info)
+{
+  jvirt_barray_ptr *dst_coef_arrays = info->workspace_coef_arrays;
+
+  /* Note: conditions tested here should match those in switch statement
+   * in jtransform_request_workspace()
+   */
+  switch (info->transform) {
+  case JXFORM_NONE:
+    if (info->output_width > srcinfo->output_width ||
+        info->output_height > srcinfo->output_height) {
+      if (info->output_width > srcinfo->output_width &&
+          info->crop_width_set == JCROP_REFLECT)
+        do_crop_ext_reflect(srcinfo, dstinfo,
+                            info->x_crop_offset, info->y_crop_offset,
+                            src_coef_arrays, dst_coef_arrays);
+      else if (info->output_width > srcinfo->output_width &&
+               info->crop_width_set == JCROP_FORCE)
+        do_crop_ext_flat(srcinfo, dstinfo,
+                         info->x_crop_offset, info->y_crop_offset,
+                         src_coef_arrays, dst_coef_arrays);
+      else
+        do_crop_ext_zero(srcinfo, dstinfo,
+                         info->x_crop_offset, info->y_crop_offset,
+                         src_coef_arrays, dst_coef_arrays);
+    } else if (info->x_crop_offset != 0 || info->y_crop_offset != 0)
+      do_crop(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+              src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_FLIP_H:
+    if (info->y_crop_offset != 0 || info->slow_hflip)
+      do_flip_h(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+                src_coef_arrays, dst_coef_arrays);
+    else
+      do_flip_h_no_crop(srcinfo, dstinfo, info->x_crop_offset,
+                        src_coef_arrays);
+    break;
+  case JXFORM_FLIP_V:
+    do_flip_v(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+              src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_TRANSPOSE:
+    do_transpose(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+                 src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_TRANSVERSE:
+    do_transverse(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+                  src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_ROT_90:
+    do_rot_90(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+              src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_ROT_180:
+    do_rot_180(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+               src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_ROT_270:
+    do_rot_270(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+               src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_WIPE:
+    if (info->crop_width_set == JCROP_REFLECT &&
+        info->y_crop_offset == 0 && info->drop_height ==
+        (JDIMENSION)jdiv_round_up
+          ((long)info->output_height, (long)info->iMCU_sample_height) &&
+        (info->x_crop_offset == 0 ||
+         info->x_crop_offset + info->drop_width ==
+         (JDIMENSION)jdiv_round_up
+           ((long)info->output_width, (long)info->iMCU_sample_width)))
+      do_reflect(srcinfo, dstinfo, info->x_crop_offset,
+                 src_coef_arrays, info->drop_width, info->drop_height);
+    else if (info->crop_width_set == JCROP_FORCE)
+      do_flatten(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+                 src_coef_arrays, info->drop_width, info->drop_height);
+    else
+      do_wipe(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+              src_coef_arrays, info->drop_width, info->drop_height);
+    break;
+  case JXFORM_DROP:
+    if (info->drop_width != 0 && info->drop_height != 0)
+      do_drop(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+              src_coef_arrays, info->drop_ptr, info->drop_coef_arrays,
+              info->drop_width, info->drop_height);
+    break;
+  }
+}
+
+/* jtransform_perfect_transform
+ *
+ * Determine whether lossless transformation is perfectly
+ * possible for a specified image and transformation.
+ *
+ * Inputs:
+ *   image_width, image_height: source image dimensions.
+ *   MCU_width, MCU_height: pixel dimensions of MCU.
+ *   transform: transformation identifier.
+ * Parameter sources from initialized jpeg_struct
+ * (after reading source header):
+ *   image_width = cinfo.image_width
+ *   image_height = cinfo.image_height
+ *   MCU_width = cinfo.max_h_samp_factor * cinfo.block_size
+ *   MCU_height = cinfo.max_v_samp_factor * cinfo.block_size
+ * Result:
+ *   TRUE = perfect transformation possible
+ *   FALSE = perfect transformation not possible
+ *           (may use custom action then)
+ */
+
+GLOBAL(boolean)
+jtransform_perfect_transform(JDIMENSION image_width, JDIMENSION image_height,
+                             int MCU_width, int MCU_height,
+                             JXFORM_CODE transform)
+{
+  boolean result = TRUE; /* initialize TRUE */
+
+  switch (transform) {
+  case JXFORM_FLIP_H:
+  case JXFORM_ROT_270:
+    if (image_width % (JDIMENSION)MCU_width)
+      result = FALSE;
+    break;
+  case JXFORM_FLIP_V:
+  case JXFORM_ROT_90:
+    if (image_height % (JDIMENSION)MCU_height)
+      result = FALSE;
+    break;
+  case JXFORM_TRANSVERSE:
+  case JXFORM_ROT_180:
+    if (image_width % (JDIMENSION)MCU_width)
+      result = FALSE;
+    if (image_height % (JDIMENSION)MCU_height)
+      result = FALSE;
+    break;
+  default:
+    break;
+  }
+
+  return result;
+}
+
+#endif /* TRANSFORMS_SUPPORTED */
+
+
+/* Setup decompression object to save desired markers in memory.
+ * This must be called before jpeg_read_header() to have the desired effect.
+ */
+
+GLOBAL(void)
+jcopy_markers_setup(j_decompress_ptr srcinfo, JCOPY_OPTION option)
+{
+#ifdef SAVE_MARKERS_SUPPORTED
+  int m;
+
+  /* Save comments except under NONE option */
+  if (option != JCOPYOPT_NONE && option != JCOPYOPT_ICC) {
+    jpeg_save_markers(srcinfo, JPEG_COM, 0xFFFF);
+  }
+  /* Save all types of APPn markers iff ALL option */
+  if (option == JCOPYOPT_ALL || option == JCOPYOPT_ALL_EXCEPT_ICC) {
+    for (m = 0; m < 16; m++) {
+      if (option == JCOPYOPT_ALL_EXCEPT_ICC && m == 2)
+        continue;
+      jpeg_save_markers(srcinfo, JPEG_APP0 + m, 0xFFFF);
+    }
+  }
+  /* Save only APP2 markers if ICC option selected */
+  if (option == JCOPYOPT_ICC) {
+    jpeg_save_markers(srcinfo, JPEG_APP0 + 2, 0xFFFF);
+  }
+#endif /* SAVE_MARKERS_SUPPORTED */
+}
+
+/* Copy markers saved in the given source object to the destination object.
+ * This should be called just after jpeg_start_compress() or
+ * jpeg_write_coefficients().
+ * Note that those routines will have written the SOI, and also the
+ * JFIF APP0 or Adobe APP14 markers if selected.
+ */
+
+GLOBAL(void)
+jcopy_markers_execute(j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+                      JCOPY_OPTION option)
+{
+  jpeg_saved_marker_ptr marker;
+
+  /* In the current implementation, we don't actually need to examine the
+   * option flag here; we just copy everything that got saved.
+   * But to avoid confusion, we do not output JFIF and Adobe APP14 markers
+   * if the encoder library already wrote one.
+   */
+  for (marker = srcinfo->marker_list; marker != NULL; marker = marker->next) {
+    if (dstinfo->write_JFIF_header &&
+        marker->marker == JPEG_APP0 &&
+        marker->data_length >= 5 &&
+        marker->data[0] == 0x4A &&
+        marker->data[1] == 0x46 &&
+        marker->data[2] == 0x49 &&
+        marker->data[3] == 0x46 &&
+        marker->data[4] == 0)
+      continue;                 /* reject duplicate JFIF */
+    if (dstinfo->write_Adobe_marker &&
+        marker->marker == JPEG_APP0 + 14 &&
+        marker->data_length >= 5 &&
+        marker->data[0] == 0x41 &&
+        marker->data[1] == 0x64 &&
+        marker->data[2] == 0x6F &&
+        marker->data[3] == 0x62 &&
+        marker->data[4] == 0x65)
+      continue;                 /* reject duplicate Adobe */
+    jpeg_write_marker(dstinfo, marker->marker,
+                      marker->data, marker->data_length);
+  }
+}