image_pack 0.2.0

data/ext/image_pack/vendor/mozjpeg/simd/mips/jsimd_dspr2_asm.h

@@ -0,0 +1,292 @@
+/*
+ * MIPS DSPr2 optimizations for libjpeg-turbo
+ *
+ * Copyright (C) 2013, MIPS Technologies, Inc., California.
+ * Copyright (C) 2018, Matthieu Darbois.
+ * All Rights Reserved.
+ * Authors:  Teodora Novkovic (teodora.novkovic@imgtec.com)
+ *           Darko Laus       (darko.laus@imgtec.com)
+ * This software is provided 'as-is', without any express or implied
+ * warranty.  In no event will the authors be held liable for any damages
+ * arising from the use of this software.
+ *
+ * Permission is granted to anyone to use this software for any purpose,
+ * including commercial applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be misrepresented; you must not
+ *    claim that you wrote the original software. If you use this software
+ *    in a product, an acknowledgment in the product documentation would be
+ *    appreciated but is not required.
+ * 2. Altered source versions must be plainly marked as such, and must not be
+ *    misrepresented as being the original software.
+ * 3. This notice may not be removed or altered from any source distribution.
+ */
+
+#define zero  $0
+#define AT    $1
+#define v0    $2
+#define v1    $3
+#define a0    $4
+#define a1    $5
+#define a2    $6
+#define a3    $7
+#define t0    $8
+#define t1    $9
+#define t2    $10
+#define t3    $11
+#define t4    $12
+#define t5    $13
+#define t6    $14
+#define t7    $15
+#define s0    $16
+#define s1    $17
+#define s2    $18
+#define s3    $19
+#define s4    $20
+#define s5    $21
+#define s6    $22
+#define s7    $23
+#define t8    $24
+#define t9    $25
+#define k0    $26
+#define k1    $27
+#define gp    $28
+#define sp    $29
+#define fp    $30
+#define s8    $30
+#define ra    $31
+
+#define f0    $f0
+#define f1    $f1
+#define f2    $f2
+#define f3    $f3
+#define f4    $f4
+#define f5    $f5
+#define f6    $f6
+#define f7    $f7
+#define f8    $f8
+#define f9    $f9
+#define f10   $f10
+#define f11   $f11
+#define f12   $f12
+#define f13   $f13
+#define f14   $f14
+#define f15   $f15
+#define f16   $f16
+#define f17   $f17
+#define f18   $f18
+#define f19   $f19
+#define f20   $f20
+#define f21   $f21
+#define f22   $f22
+#define f23   $f23
+#define f24   $f24
+#define f25   $f25
+#define f26   $f26
+#define f27   $f27
+#define f28   $f28
+#define f29   $f29
+#define f30   $f30
+#define f31   $f31
+
+#ifdef __ELF__
+#define HIDDEN_SYMBOL(symbol)  .hidden symbol;
+#else
+#define HIDDEN_SYMBOL(symbol)
+#endif
+
+/*
+ * LEAF_MIPS32R2 - declare leaf routine for MIPS32r2
+ */
+#define LEAF_MIPS32R2(symbol) \
+    .globl      symbol; \
+    HIDDEN_SYMBOL(symbol) \
+    .align      2; \
+    .type       symbol, @function; \
+    .ent        symbol, 0; \
+symbol: \
+    .frame      sp, 0, ra; \
+    .set        push; \
+    .set        arch = mips32r2; \
+    .set        noreorder; \
+    .set        noat;
+
+/*
+ * LEAF_DSPR2 - declare leaf routine for MIPS DSPr2
+ */
+#define LEAF_DSPR2(symbol) \
+LEAF_MIPS32R2(symbol) \
+    .set        dspr2;
+
+/*
+ * END - mark end of function
+ */
+#define END(function) \
+    .set        pop; \
+    .end        function; \
+    .size       function, .-function
+
+/*
+ * Checks if stack offset is big enough for storing/restoring regs_num
+ * number of register to/from stack. Stack offset must be greater than
+ * or equal to the number of bytes needed for storing registers (regs_num*4).
+ * Since MIPS ABI allows usage of first 16 bytes of stack frame (this is
+ * preserved for input arguments of the functions, already stored in a0-a3),
+ * stack size can be further optimized by utilizing this space.
+ */
+.macro CHECK_STACK_OFFSET regs_num, stack_offset
+.if \stack_offset < \regs_num * 4 - 16
+.error "Stack offset too small."
+.endif
+.endm
+
+/*
+ * Saves set of registers on stack. Maximum number of registers that
+ * can be saved on stack is limitted to 14 (a0-a3, v0-v1 and s0-s7).
+ * Stack offset is number of bytes that are added to stack pointer (sp)
+ * before registers are pushed in order to provide enough space on stack
+ * (offset must be multiple of 4, and must be big enough, as described by
+ * CHECK_STACK_OFFSET macro). This macro is intended to be used in
+ * combination with RESTORE_REGS_FROM_STACK macro. Example:
+ *  SAVE_REGS_ON_STACK      4, v0, v1, s0, s1
+ *  RESTORE_REGS_FROM_STACK 4, v0, v1, s0, s1
+ */
+.macro SAVE_REGS_ON_STACK  stack_offset = 0, r1, \
+                           r2  = 0, r3  = 0, r4  = 0, \
+                           r5  = 0, r6  = 0, r7  = 0, \
+                           r8  = 0, r9  = 0, r10 = 0, \
+                           r11 = 0, r12 = 0, r13 = 0, \
+                           r14 = 0
+.if (\stack_offset < 0) || (\stack_offset - (\stack_offset / 4) * 4)
+    .error "Stack offset must be pozitive and multiple of 4."
+.endif
+.if \stack_offset != 0
+    addiu       sp, sp, -\stack_offset
+.endif
+    sw          \r1, 0(sp)
+.if \r2 != 0
+    sw          \r2, 4(sp)
+.endif
+.if \r3 != 0
+    sw          \r3, 8(sp)
+.endif
+.if \r4 != 0
+    sw          \r4, 12(sp)
+.endif
+.if \r5 != 0
+    CHECK_STACK_OFFSET 5, \stack_offset
+    sw          \r5, 16(sp)
+.endif
+.if \r6 != 0
+    CHECK_STACK_OFFSET 6, \stack_offset
+    sw          \r6, 20(sp)
+.endif
+.if \r7 != 0
+    CHECK_STACK_OFFSET 7, \stack_offset
+    sw          \r7, 24(sp)
+.endif
+.if \r8 != 0
+    CHECK_STACK_OFFSET 8, \stack_offset
+    sw          \r8, 28(sp)
+.endif
+.if \r9 != 0
+    CHECK_STACK_OFFSET 9, \stack_offset
+    sw          \r9, 32(sp)
+.endif
+.if \r10 != 0
+    CHECK_STACK_OFFSET 10, \stack_offset
+    sw          \r10, 36(sp)
+.endif
+.if \r11 != 0
+    CHECK_STACK_OFFSET 11, \stack_offset
+    sw          \r11, 40(sp)
+.endif
+.if \r12 != 0
+    CHECK_STACK_OFFSET 12, \stack_offset
+    sw          \r12, 44(sp)
+.endif
+.if \r13 != 0
+    CHECK_STACK_OFFSET 13, \stack_offset
+    sw          \r13, 48(sp)
+.endif
+.if \r14 != 0
+    CHECK_STACK_OFFSET 14, \stack_offset
+    sw          \r14, 52(sp)
+.endif
+.endm
+
+/*
+ * Restores set of registers from stack. Maximum number of registers that
+ * can be restored from stack is limitted to 14 (a0-a3, v0-v1 and s0-s7).
+ * Stack offset is number of bytes that are added to stack pointer (sp)
+ * after registers are restored (offset must be multiple of 4, and must
+ * be big enough, as described by CHECK_STACK_OFFSET macro). This macro is
+ * intended to be used in combination with RESTORE_REGS_FROM_STACK macro.
+ * Example:
+ *  SAVE_REGS_ON_STACK      4, v0, v1, s0, s1
+ *  RESTORE_REGS_FROM_STACK 4, v0, v1, s0, s1
+ */
+.macro RESTORE_REGS_FROM_STACK  stack_offset = 0, r1, \
+                                r2  = 0, r3  = 0, r4  = 0, \
+                                r5  = 0, r6  = 0, r7  = 0, \
+                                r8  = 0, r9  = 0, r10 = 0, \
+                                r11 = 0, r12 = 0, r13 = 0, \
+                                r14 = 0
+.if (\stack_offset < 0) || (\stack_offset - (\stack_offset / 4) * 4)
+    .error "Stack offset must be pozitive and multiple of 4."
+.endif
+    lw          \r1, 0(sp)
+.if \r2 != 0
+    lw          \r2, 4(sp)
+.endif
+.if \r3 != 0
+    lw          \r3, 8(sp)
+.endif
+.if \r4 != 0
+    lw          \r4, 12(sp)
+.endif
+.if \r5 != 0
+    CHECK_STACK_OFFSET 5, \stack_offset
+    lw          \r5, 16(sp)
+.endif
+.if \r6 != 0
+    CHECK_STACK_OFFSET 6, \stack_offset
+    lw          \r6, 20(sp)
+.endif
+.if \r7 != 0
+    CHECK_STACK_OFFSET 7, \stack_offset
+    lw          \r7, 24(sp)
+.endif
+.if \r8 != 0
+    CHECK_STACK_OFFSET 8, \stack_offset
+    lw          \r8, 28(sp)
+.endif
+.if \r9 != 0
+    CHECK_STACK_OFFSET 9, \stack_offset
+    lw          \r9, 32(sp)
+.endif
+.if \r10 != 0
+    CHECK_STACK_OFFSET 10, \stack_offset
+    lw          \r10, 36(sp)
+.endif
+.if \r11 != 0
+    CHECK_STACK_OFFSET 11, \stack_offset
+    lw          \r11, 40(sp)
+.endif
+.if \r12 != 0
+    CHECK_STACK_OFFSET 12, \stack_offset
+    lw          \r12, 44(sp)
+.endif
+.if \r13 != 0
+    CHECK_STACK_OFFSET 13, \stack_offset
+    lw          \r13, 48(sp)
+.endif
+.if \r14 != 0
+    CHECK_STACK_OFFSET 14, \stack_offset
+    lw          \r14, 52(sp)
+.endif
+.if \stack_offset != 0
+    addiu       sp, sp, \stack_offset
+.endif
+.endm