image_intensities 1.0.3 → 1.0.4

data/ext/image_intensities/turbojpeg/jcdctmgr.c

@@ -0,0 +1,721 @@
+/*
+ * jcdctmgr.c
+ *
+ * This file was part of the Independent JPEG Group's software:
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * libjpeg-turbo Modifications:
+ * Copyright (C) 1999-2006, MIYASAKA Masaru.
+ * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
+ * Copyright (C) 2011, 2014-2015, D. R. Commander.
+ * For conditions of distribution and use, see the accompanying README.ijg
+ * file.
+ *
+ * This file contains the forward-DCT management logic.
+ * This code selects a particular DCT implementation to be used,
+ * and it performs related housekeeping chores including coefficient
+ * quantization.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jdct.h"               /* Private declarations for DCT subsystem */
+#include "jsimddct.h"
+
+
+/* Private subobject for this module */
+
+typedef void (*forward_DCT_method_ptr) (DCTELEM *data);
+typedef void (*float_DCT_method_ptr) (FAST_FLOAT *data);
+
+typedef void (*convsamp_method_ptr) (JSAMPARRAY sample_data,
+                                     JDIMENSION start_col,
+                                     DCTELEM *workspace);
+typedef void (*float_convsamp_method_ptr) (JSAMPARRAY sample_data,
+                                           JDIMENSION start_col,
+                                           FAST_FLOAT *workspace);
+
+typedef void (*quantize_method_ptr) (JCOEFPTR coef_block, DCTELEM *divisors,
+                                     DCTELEM *workspace);
+typedef void (*float_quantize_method_ptr) (JCOEFPTR coef_block,
+                                           FAST_FLOAT *divisors,
+                                           FAST_FLOAT *workspace);
+
+METHODDEF(void) quantize(JCOEFPTR, DCTELEM *, DCTELEM *);
+
+typedef struct {
+  struct jpeg_forward_dct pub;  /* public fields */
+
+  /* Pointer to the DCT routine actually in use */
+  forward_DCT_method_ptr dct;
+  convsamp_method_ptr convsamp;
+  quantize_method_ptr quantize;
+
+  /* The actual post-DCT divisors --- not identical to the quant table
+   * entries, because of scaling (especially for an unnormalized DCT).
+   * Each table is given in normal array order.
+   */
+  DCTELEM *divisors[NUM_QUANT_TBLS];
+
+  /* work area for FDCT subroutine */
+  DCTELEM *workspace;
+
+#ifdef DCT_FLOAT_SUPPORTED
+  /* Same as above for the floating-point case. */
+  float_DCT_method_ptr float_dct;
+  float_convsamp_method_ptr float_convsamp;
+  float_quantize_method_ptr float_quantize;
+  FAST_FLOAT *float_divisors[NUM_QUANT_TBLS];
+  FAST_FLOAT *float_workspace;
+#endif
+} my_fdct_controller;
+
+typedef my_fdct_controller *my_fdct_ptr;
+
+
+#if BITS_IN_JSAMPLE == 8
+
+/*
+ * Find the highest bit in an integer through binary search.
+ */
+
+LOCAL(int)
+flss(UINT16 val)
+{
+  int bit;
+
+  bit = 16;
+
+  if (!val)
+    return 0;
+
+  if (!(val & 0xff00)) {
+    bit -= 8;
+    val <<= 8;
+  }
+  if (!(val & 0xf000)) {
+    bit -= 4;
+    val <<= 4;
+  }
+  if (!(val & 0xc000)) {
+    bit -= 2;
+    val <<= 2;
+  }
+  if (!(val & 0x8000)) {
+    bit -= 1;
+    val <<= 1;
+  }
+
+  return bit;
+}
+
+
+/*
+ * Compute values to do a division using reciprocal.
+ *
+ * This implementation is based on an algorithm described in
+ *   "How to optimize for the Pentium family of microprocessors"
+ *   (http://www.agner.org/assem/).
+ * More information about the basic algorithm can be found in
+ * the paper "Integer Division Using Reciprocals" by Robert Alverson.
+ *
+ * The basic idea is to replace x/d by x * d^-1. In order to store
+ * d^-1 with enough precision we shift it left a few places. It turns
+ * out that this algoright gives just enough precision, and also fits
+ * into DCTELEM:
+ *
+ *   b = (the number of significant bits in divisor) - 1
+ *   r = (word size) + b
+ *   f = 2^r / divisor
+ *
+ * f will not be an integer for most cases, so we need to compensate
+ * for the rounding error introduced:
+ *
+ *   no fractional part:
+ *
+ *       result = input >> r
+ *
+ *   fractional part of f < 0.5:
+ *
+ *       round f down to nearest integer
+ *       result = ((input + 1) * f) >> r
+ *
+ *   fractional part of f > 0.5:
+ *
+ *       round f up to nearest integer
+ *       result = (input * f) >> r
+ *
+ * This is the original algorithm that gives truncated results. But we
+ * want properly rounded results, so we replace "input" with
+ * "input + divisor/2".
+ *
+ * In order to allow SIMD implementations we also tweak the values to
+ * allow the same calculation to be made at all times:
+ *
+ *   dctbl[0] = f rounded to nearest integer
+ *   dctbl[1] = divisor / 2 (+ 1 if fractional part of f < 0.5)
+ *   dctbl[2] = 1 << ((word size) * 2 - r)
+ *   dctbl[3] = r - (word size)
+ *
+ * dctbl[2] is for stupid instruction sets where the shift operation
+ * isn't member wise (e.g. MMX).
+ *
+ * The reason dctbl[2] and dctbl[3] reduce the shift with (word size)
+ * is that most SIMD implementations have a "multiply and store top
+ * half" operation.
+ *
+ * Lastly, we store each of the values in their own table instead
+ * of in a consecutive manner, yet again in order to allow SIMD
+ * routines.
+ */
+
+LOCAL(int)
+compute_reciprocal(UINT16 divisor, DCTELEM *dtbl)
+{
+  UDCTELEM2 fq, fr;
+  UDCTELEM c;
+  int b, r;
+
+  if (divisor == 1) {
+    /* divisor == 1 means unquantized, so these reciprocal/correction/shift
+     * values will cause the C quantization algorithm to act like the
+     * identity function.  Since only the C quantization algorithm is used in
+     * these cases, the scale value is irrelevant.
+     */
+    dtbl[DCTSIZE2 * 0] = (DCTELEM)1;                        /* reciprocal */
+    dtbl[DCTSIZE2 * 1] = (DCTELEM)0;                        /* correction */
+    dtbl[DCTSIZE2 * 2] = (DCTELEM)1;                        /* scale */
+    dtbl[DCTSIZE2 * 3] = -(DCTELEM)(sizeof(DCTELEM) * 8);   /* shift */
+    return 0;
+  }
+
+  b = flss(divisor) - 1;
+  r  = sizeof(DCTELEM) * 8 + b;
+
+  fq = ((UDCTELEM2)1 << r) / divisor;
+  fr = ((UDCTELEM2)1 << r) % divisor;
+
+  c = divisor / 2;                      /* for rounding */
+
+  if (fr == 0) {                        /* divisor is power of two */
+    /* fq will be one bit too large to fit in DCTELEM, so adjust */
+    fq >>= 1;
+    r--;
+  } else if (fr <= (divisor / 2U)) {    /* fractional part is < 0.5 */
+    c++;
+  } else {                              /* fractional part is > 0.5 */
+    fq++;
+  }
+
+  dtbl[DCTSIZE2 * 0] = (DCTELEM)fq;     /* reciprocal */
+  dtbl[DCTSIZE2 * 1] = (DCTELEM)c;      /* correction + roundfactor */
+#ifdef WITH_SIMD
+  dtbl[DCTSIZE2 * 2] = (DCTELEM)(1 << (sizeof(DCTELEM) * 8 * 2 - r)); /* scale */
+#else
+  dtbl[DCTSIZE2 * 2] = 1;
+#endif
+  dtbl[DCTSIZE2 * 3] = (DCTELEM)r - sizeof(DCTELEM) * 8; /* shift */
+
+  if (r <= 16) return 0;
+  else return 1;
+}
+
+#endif
+
+
+/*
+ * Initialize for a processing pass.
+ * Verify that all referenced Q-tables are present, and set up
+ * the divisor table for each one.
+ * In the current implementation, DCT of all components is done during
+ * the first pass, even if only some components will be output in the
+ * first scan.  Hence all components should be examined here.
+ */
+
+METHODDEF(void)
+start_pass_fdctmgr(j_compress_ptr cinfo)
+{
+  my_fdct_ptr fdct = (my_fdct_ptr)cinfo->fdct;
+  int ci, qtblno, i;
+  jpeg_component_info *compptr;
+  JQUANT_TBL *qtbl;
+  DCTELEM *dtbl;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    qtblno = compptr->quant_tbl_no;
+    /* Make sure specified quantization table is present */
+    if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS ||
+        cinfo->quant_tbl_ptrs[qtblno] == NULL)
+      ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno);
+    qtbl = cinfo->quant_tbl_ptrs[qtblno];
+    /* Compute divisors for this quant table */
+    /* We may do this more than once for same table, but it's not a big deal */
+    switch (cinfo->dct_method) {
+#ifdef DCT_ISLOW_SUPPORTED
+    case JDCT_ISLOW:
+      /* For LL&M IDCT method, divisors are equal to raw quantization
+       * coefficients multiplied by 8 (to counteract scaling).
+       */
+      if (fdct->divisors[qtblno] == NULL) {
+        fdct->divisors[qtblno] = (DCTELEM *)
+          (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE,
+                                      (DCTSIZE2 * 4) * sizeof(DCTELEM));
+      }
+      dtbl = fdct->divisors[qtblno];
+      for (i = 0; i < DCTSIZE2; i++) {
+#if BITS_IN_JSAMPLE == 8
+        if (!compute_reciprocal(qtbl->quantval[i] << 3, &dtbl[i]) &&
+            fdct->quantize == jsimd_quantize)
+          fdct->quantize = quantize;
+#else
+        dtbl[i] = ((DCTELEM)qtbl->quantval[i]) << 3;
+#endif
+      }
+      break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+    case JDCT_IFAST:
+      {
+        /* For AA&N IDCT method, divisors are equal to quantization
+         * coefficients scaled by scalefactor[row]*scalefactor[col], where
+         *   scalefactor[0] = 1
+         *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+         * We apply a further scale factor of 8.
+         */
+#define CONST_BITS  14
+        static const INT16 aanscales[DCTSIZE2] = {
+          /* precomputed values scaled up by 14 bits */
+          16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+          22725, 31521, 29692, 26722, 22725, 17855, 12299,  6270,
+          21407, 29692, 27969, 25172, 21407, 16819, 11585,  5906,
+          19266, 26722, 25172, 22654, 19266, 15137, 10426,  5315,
+          16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+          12873, 17855, 16819, 15137, 12873, 10114,  6967,  3552,
+           8867, 12299, 11585, 10426,  8867,  6967,  4799,  2446,
+           4520,  6270,  5906,  5315,  4520,  3552,  2446,  1247
+        };
+        SHIFT_TEMPS
+
+        if (fdct->divisors[qtblno] == NULL) {
+          fdct->divisors[qtblno] = (DCTELEM *)
+            (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE,
+                                        (DCTSIZE2 * 4) * sizeof(DCTELEM));
+        }
+        dtbl = fdct->divisors[qtblno];
+        for (i = 0; i < DCTSIZE2; i++) {
+#if BITS_IN_JSAMPLE == 8
+          if (!compute_reciprocal(
+                DESCALE(MULTIPLY16V16((JLONG)qtbl->quantval[i],
+                                      (JLONG)aanscales[i]),
+                        CONST_BITS - 3), &dtbl[i]) &&
+              fdct->quantize == jsimd_quantize)
+            fdct->quantize = quantize;
+#else
+          dtbl[i] = (DCTELEM)
+            DESCALE(MULTIPLY16V16((JLONG)qtbl->quantval[i],
+                                  (JLONG)aanscales[i]),
+                    CONST_BITS - 3);
+#endif
+        }
+      }
+      break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+    case JDCT_FLOAT:
+      {
+        /* For float AA&N IDCT method, divisors are equal to quantization
+         * coefficients scaled by scalefactor[row]*scalefactor[col], where
+         *   scalefactor[0] = 1
+         *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+         * We apply a further scale factor of 8.
+         * What's actually stored is 1/divisor so that the inner loop can
+         * use a multiplication rather than a division.
+         */
+        FAST_FLOAT *fdtbl;
+        int row, col;
+        static const double aanscalefactor[DCTSIZE] = {
+          1.0, 1.387039845, 1.306562965, 1.175875602,
+          1.0, 0.785694958, 0.541196100, 0.275899379
+        };
+
+        if (fdct->float_divisors[qtblno] == NULL) {
+          fdct->float_divisors[qtblno] = (FAST_FLOAT *)
+            (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE,
+                                        DCTSIZE2 * sizeof(FAST_FLOAT));
+        }
+        fdtbl = fdct->float_divisors[qtblno];
+        i = 0;
+        for (row = 0; row < DCTSIZE; row++) {
+          for (col = 0; col < DCTSIZE; col++) {
+            fdtbl[i] = (FAST_FLOAT)
+              (1.0 / (((double)qtbl->quantval[i] *
+                       aanscalefactor[row] * aanscalefactor[col] * 8.0)));
+            i++;
+          }
+        }
+      }
+      break;
+#endif
+    default:
+      ERREXIT(cinfo, JERR_NOT_COMPILED);
+      break;
+    }
+  }
+}
+
+
+/*
+ * Load data into workspace, applying unsigned->signed conversion.
+ */
+
+METHODDEF(void)
+convsamp(JSAMPARRAY sample_data, JDIMENSION start_col, DCTELEM *workspace)
+{
+  register DCTELEM *workspaceptr;
+  register JSAMPROW elemptr;
+  register int elemr;
+
+  workspaceptr = workspace;
+  for (elemr = 0; elemr < DCTSIZE; elemr++) {
+    elemptr = sample_data[elemr] + start_col;
+
+#if DCTSIZE == 8                /* unroll the inner loop */
+    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+#else
+    {
+      register int elemc;
+      for (elemc = DCTSIZE; elemc > 0; elemc--)
+        *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+    }
+#endif
+  }
+}
+
+
+/*
+ * Quantize/descale the coefficients, and store into coef_blocks[].
+ */
+
+METHODDEF(void)
+quantize(JCOEFPTR coef_block, DCTELEM *divisors, DCTELEM *workspace)
+{
+  int i;
+  DCTELEM temp;
+  JCOEFPTR output_ptr = coef_block;
+
+#if BITS_IN_JSAMPLE == 8
+
+  UDCTELEM recip, corr;
+  int shift;
+  UDCTELEM2 product;
+
+  for (i = 0; i < DCTSIZE2; i++) {
+    temp = workspace[i];
+    recip = divisors[i + DCTSIZE2 * 0];
+    corr =  divisors[i + DCTSIZE2 * 1];
+    shift = divisors[i + DCTSIZE2 * 3];
+
+    if (temp < 0) {
+      temp = -temp;
+      product = (UDCTELEM2)(temp + corr) * recip;
+      product >>= shift + sizeof(DCTELEM) * 8;
+      temp = (DCTELEM)product;
+      temp = -temp;
+    } else {
+      product = (UDCTELEM2)(temp + corr) * recip;
+      product >>= shift + sizeof(DCTELEM) * 8;
+      temp = (DCTELEM)product;
+    }
+    output_ptr[i] = (JCOEF)temp;
+  }
+
+#else
+
+  register DCTELEM qval;
+
+  for (i = 0; i < DCTSIZE2; i++) {
+    qval = divisors[i];
+    temp = workspace[i];
+    /* Divide the coefficient value by qval, ensuring proper rounding.
+     * Since C does not specify the direction of rounding for negative
+     * quotients, we have to force the dividend positive for portability.
+     *
+     * In most files, at least half of the output values will be zero
+     * (at default quantization settings, more like three-quarters...)
+     * so we should ensure that this case is fast.  On many machines,
+     * a comparison is enough cheaper than a divide to make a special test
+     * a win.  Since both inputs will be nonnegative, we need only test
+     * for a < b to discover whether a/b is 0.
+     * If your machine's division is fast enough, define FAST_DIVIDE.
+     */
+#ifdef FAST_DIVIDE
+#define DIVIDE_BY(a, b)  a /= b
+#else
+#define DIVIDE_BY(a, b)  if (a >= b) a /= b;  else a = 0
+#endif
+    if (temp < 0) {
+      temp = -temp;
+      temp += qval >> 1;        /* for rounding */
+      DIVIDE_BY(temp, qval);
+      temp = -temp;
+    } else {
+      temp += qval >> 1;        /* for rounding */
+      DIVIDE_BY(temp, qval);
+    }
+    output_ptr[i] = (JCOEF)temp;
+  }
+
+#endif
+
+}
+
+
+/*
+ * Perform forward DCT on one or more blocks of a component.
+ *
+ * The input samples are taken from the sample_data[] array starting at
+ * position start_row/start_col, and moving to the right for any additional
+ * blocks. The quantized coefficients are returned in coef_blocks[].
+ */
+
+METHODDEF(void)
+forward_DCT(j_compress_ptr cinfo, jpeg_component_info *compptr,
+            JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
+            JDIMENSION start_row, JDIMENSION start_col, JDIMENSION num_blocks)
+/* This version is used for integer DCT implementations. */
+{
+  /* This routine is heavily used, so it's worth coding it tightly. */
+  my_fdct_ptr fdct = (my_fdct_ptr)cinfo->fdct;
+  DCTELEM *divisors = fdct->divisors[compptr->quant_tbl_no];
+  DCTELEM *workspace;
+  JDIMENSION bi;
+
+  /* Make sure the compiler doesn't look up these every pass */
+  forward_DCT_method_ptr do_dct = fdct->dct;
+  convsamp_method_ptr do_convsamp = fdct->convsamp;
+  quantize_method_ptr do_quantize = fdct->quantize;
+  workspace = fdct->workspace;
+
+  sample_data += start_row;     /* fold in the vertical offset once */
+
+  for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) {
+    /* Load data into workspace, applying unsigned->signed conversion */
+    (*do_convsamp) (sample_data, start_col, workspace);
+
+    /* Perform the DCT */
+    (*do_dct) (workspace);
+
+    /* Quantize/descale the coefficients, and store into coef_blocks[] */
+    (*do_quantize) (coef_blocks[bi], divisors, workspace);
+  }
+}
+
+
+#ifdef DCT_FLOAT_SUPPORTED
+
+METHODDEF(void)
+convsamp_float(JSAMPARRAY sample_data, JDIMENSION start_col,
+               FAST_FLOAT *workspace)
+{
+  register FAST_FLOAT *workspaceptr;
+  register JSAMPROW elemptr;
+  register int elemr;
+
+  workspaceptr = workspace;
+  for (elemr = 0; elemr < DCTSIZE; elemr++) {
+    elemptr = sample_data[elemr] + start_col;
+#if DCTSIZE == 8                /* unroll the inner loop */
+    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+#else
+    {
+      register int elemc;
+      for (elemc = DCTSIZE; elemc > 0; elemc--)
+        *workspaceptr++ = (FAST_FLOAT)
+                          (GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+    }
+#endif
+  }
+}
+
+
+METHODDEF(void)
+quantize_float(JCOEFPTR coef_block, FAST_FLOAT *divisors,
+               FAST_FLOAT *workspace)
+{
+  register FAST_FLOAT temp;
+  register int i;
+  register JCOEFPTR output_ptr = coef_block;
+
+  for (i = 0; i < DCTSIZE2; i++) {
+    /* Apply the quantization and scaling factor */
+    temp = workspace[i] * divisors[i];
+
+    /* Round to nearest integer.
+     * Since C does not specify the direction of rounding for negative
+     * quotients, we have to force the dividend positive for portability.
+     * The maximum coefficient size is +-16K (for 12-bit data), so this
+     * code should work for either 16-bit or 32-bit ints.
+     */
+    output_ptr[i] = (JCOEF)((int)(temp + (FAST_FLOAT)16384.5) - 16384);
+  }
+}
+
+
+METHODDEF(void)
+forward_DCT_float(j_compress_ptr cinfo, jpeg_component_info *compptr,
+                  JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
+                  JDIMENSION start_row, JDIMENSION start_col,
+                  JDIMENSION num_blocks)
+/* This version is used for floating-point DCT implementations. */
+{
+  /* This routine is heavily used, so it's worth coding it tightly. */
+  my_fdct_ptr fdct = (my_fdct_ptr)cinfo->fdct;
+  FAST_FLOAT *divisors = fdct->float_divisors[compptr->quant_tbl_no];
+  FAST_FLOAT *workspace;
+  JDIMENSION bi;
+
+
+  /* Make sure the compiler doesn't look up these every pass */
+  float_DCT_method_ptr do_dct = fdct->float_dct;
+  float_convsamp_method_ptr do_convsamp = fdct->float_convsamp;
+  float_quantize_method_ptr do_quantize = fdct->float_quantize;
+  workspace = fdct->float_workspace;
+
+  sample_data += start_row;     /* fold in the vertical offset once */
+
+  for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) {
+    /* Load data into workspace, applying unsigned->signed conversion */
+    (*do_convsamp) (sample_data, start_col, workspace);
+
+    /* Perform the DCT */
+    (*do_dct) (workspace);
+
+    /* Quantize/descale the coefficients, and store into coef_blocks[] */
+    (*do_quantize) (coef_blocks[bi], divisors, workspace);
+  }
+}
+
+#endif /* DCT_FLOAT_SUPPORTED */
+
+
+/*
+ * Initialize FDCT manager.
+ */
+
+GLOBAL(void)
+jinit_forward_dct(j_compress_ptr cinfo)
+{
+  my_fdct_ptr fdct;
+  int i;
+
+  fdct = (my_fdct_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE,
+                                sizeof(my_fdct_controller));
+  cinfo->fdct = (struct jpeg_forward_dct *)fdct;
+  fdct->pub.start_pass = start_pass_fdctmgr;
+
+  /* First determine the DCT... */
+  switch (cinfo->dct_method) {
+#ifdef DCT_ISLOW_SUPPORTED
+  case JDCT_ISLOW:
+    fdct->pub.forward_DCT = forward_DCT;
+    if (jsimd_can_fdct_islow())
+      fdct->dct = jsimd_fdct_islow;
+    else
+      fdct->dct = jpeg_fdct_islow;
+    break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+  case JDCT_IFAST:
+    fdct->pub.forward_DCT = forward_DCT;
+    if (jsimd_can_fdct_ifast())
+      fdct->dct = jsimd_fdct_ifast;
+    else
+      fdct->dct = jpeg_fdct_ifast;
+    break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+  case JDCT_FLOAT:
+    fdct->pub.forward_DCT = forward_DCT_float;
+    if (jsimd_can_fdct_float())
+      fdct->float_dct = jsimd_fdct_float;
+    else
+      fdct->float_dct = jpeg_fdct_float;
+    break;
+#endif
+  default:
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+    break;
+  }
+
+  /* ...then the supporting stages. */
+  switch (cinfo->dct_method) {
+#ifdef DCT_ISLOW_SUPPORTED
+  case JDCT_ISLOW:
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+  case JDCT_IFAST:
+#endif
+#if defined(DCT_ISLOW_SUPPORTED) || defined(DCT_IFAST_SUPPORTED)
+    if (jsimd_can_convsamp())
+      fdct->convsamp = jsimd_convsamp;
+    else
+      fdct->convsamp = convsamp;
+    if (jsimd_can_quantize())
+      fdct->quantize = jsimd_quantize;
+    else
+      fdct->quantize = quantize;
+    break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+  case JDCT_FLOAT:
+    if (jsimd_can_convsamp_float())
+      fdct->float_convsamp = jsimd_convsamp_float;
+    else
+      fdct->float_convsamp = convsamp_float;
+    if (jsimd_can_quantize_float())
+      fdct->float_quantize = jsimd_quantize_float;
+    else
+      fdct->float_quantize = quantize_float;
+    break;
+#endif
+  default:
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+    break;
+  }
+
+  /* Allocate workspace memory */
+#ifdef DCT_FLOAT_SUPPORTED
+  if (cinfo->dct_method == JDCT_FLOAT)
+    fdct->float_workspace = (FAST_FLOAT *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE,
+                                  sizeof(FAST_FLOAT) * DCTSIZE2);
+  else
+#endif
+    fdct->workspace = (DCTELEM *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE,
+                                  sizeof(DCTELEM) * DCTSIZE2);
+
+  /* Mark divisor tables unallocated */
+  for (i = 0; i < NUM_QUANT_TBLS; i++) {
+    fdct->divisors[i] = NULL;
+#ifdef DCT_FLOAT_SUPPORTED
+    fdct->float_divisors[i] = NULL;
+#endif
+  }
+}