image_intensities 1.0.3 → 1.0.4

data/ext/image_intensities/turbojpeg/jdmainct.c

@@ -0,0 +1,460 @@
+/*
+ * jdmainct.c
+ *
+ * This file was part of the Independent JPEG Group's software:
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * libjpeg-turbo Modifications:
+ * Copyright (C) 2010, 2016, D. R. Commander.
+ * For conditions of distribution and use, see the accompanying README.ijg
+ * file.
+ *
+ * This file contains the main buffer controller for decompression.
+ * The main buffer lies between the JPEG decompressor proper and the
+ * post-processor; it holds downsampled data in the JPEG colorspace.
+ *
+ * Note that this code is bypassed in raw-data mode, since the application
+ * supplies the equivalent of the main buffer in that case.
+ */
+
+#include "jinclude.h"
+#include "jdmainct.h"
+
+
+/*
+ * In the current system design, the main buffer need never be a full-image
+ * buffer; any full-height buffers will be found inside the coefficient or
+ * postprocessing controllers.  Nonetheless, the main controller is not
+ * trivial.  Its responsibility is to provide context rows for upsampling/
+ * rescaling, and doing this in an efficient fashion is a bit tricky.
+ *
+ * Postprocessor input data is counted in "row groups".  A row group
+ * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size)
+ * sample rows of each component.  (We require DCT_scaled_size values to be
+ * chosen such that these numbers are integers.  In practice DCT_scaled_size
+ * values will likely be powers of two, so we actually have the stronger
+ * condition that DCT_scaled_size / min_DCT_scaled_size is an integer.)
+ * Upsampling will typically produce max_v_samp_factor pixel rows from each
+ * row group (times any additional scale factor that the upsampler is
+ * applying).
+ *
+ * The coefficient controller will deliver data to us one iMCU row at a time;
+ * each iMCU row contains v_samp_factor * DCT_scaled_size sample rows, or
+ * exactly min_DCT_scaled_size row groups.  (This amount of data corresponds
+ * to one row of MCUs when the image is fully interleaved.)  Note that the
+ * number of sample rows varies across components, but the number of row
+ * groups does not.  Some garbage sample rows may be included in the last iMCU
+ * row at the bottom of the image.
+ *
+ * Depending on the vertical scaling algorithm used, the upsampler may need
+ * access to the sample row(s) above and below its current input row group.
+ * The upsampler is required to set need_context_rows TRUE at global selection
+ * time if so.  When need_context_rows is FALSE, this controller can simply
+ * obtain one iMCU row at a time from the coefficient controller and dole it
+ * out as row groups to the postprocessor.
+ *
+ * When need_context_rows is TRUE, this controller guarantees that the buffer
+ * passed to postprocessing contains at least one row group's worth of samples
+ * above and below the row group(s) being processed.  Note that the context
+ * rows "above" the first passed row group appear at negative row offsets in
+ * the passed buffer.  At the top and bottom of the image, the required
+ * context rows are manufactured by duplicating the first or last real sample
+ * row; this avoids having special cases in the upsampling inner loops.
+ *
+ * The amount of context is fixed at one row group just because that's a
+ * convenient number for this controller to work with.  The existing
+ * upsamplers really only need one sample row of context.  An upsampler
+ * supporting arbitrary output rescaling might wish for more than one row
+ * group of context when shrinking the image; tough, we don't handle that.
+ * (This is justified by the assumption that downsizing will be handled mostly
+ * by adjusting the DCT_scaled_size values, so that the actual scale factor at
+ * the upsample step needn't be much less than one.)
+ *
+ * To provide the desired context, we have to retain the last two row groups
+ * of one iMCU row while reading in the next iMCU row.  (The last row group
+ * can't be processed until we have another row group for its below-context,
+ * and so we have to save the next-to-last group too for its above-context.)
+ * We could do this most simply by copying data around in our buffer, but
+ * that'd be very slow.  We can avoid copying any data by creating a rather
+ * strange pointer structure.  Here's how it works.  We allocate a workspace
+ * consisting of M+2 row groups (where M = min_DCT_scaled_size is the number
+ * of row groups per iMCU row).  We create two sets of redundant pointers to
+ * the workspace.  Labeling the physical row groups 0 to M+1, the synthesized
+ * pointer lists look like this:
+ *                   M+1                          M-1
+ * master pointer --> 0         master pointer --> 0
+ *                    1                            1
+ *                   ...                          ...
+ *                   M-3                          M-3
+ *                   M-2                           M
+ *                   M-1                          M+1
+ *                    M                           M-2
+ *                   M+1                          M-1
+ *                    0                            0
+ * We read alternate iMCU rows using each master pointer; thus the last two
+ * row groups of the previous iMCU row remain un-overwritten in the workspace.
+ * The pointer lists are set up so that the required context rows appear to
+ * be adjacent to the proper places when we pass the pointer lists to the
+ * upsampler.
+ *
+ * The above pictures describe the normal state of the pointer lists.
+ * At top and bottom of the image, we diddle the pointer lists to duplicate
+ * the first or last sample row as necessary (this is cheaper than copying
+ * sample rows around).
+ *
+ * This scheme breaks down if M < 2, ie, min_DCT_scaled_size is 1.  In that
+ * situation each iMCU row provides only one row group so the buffering logic
+ * must be different (eg, we must read two iMCU rows before we can emit the
+ * first row group).  For now, we simply do not support providing context
+ * rows when min_DCT_scaled_size is 1.  That combination seems unlikely to
+ * be worth providing --- if someone wants a 1/8th-size preview, they probably
+ * want it quick and dirty, so a context-free upsampler is sufficient.
+ */
+
+
+/* Forward declarations */
+METHODDEF(void) process_data_simple_main(j_decompress_ptr cinfo,
+                                         JSAMPARRAY output_buf,
+                                         JDIMENSION *out_row_ctr,
+                                         JDIMENSION out_rows_avail);
+METHODDEF(void) process_data_context_main(j_decompress_ptr cinfo,
+                                          JSAMPARRAY output_buf,
+                                          JDIMENSION *out_row_ctr,
+                                          JDIMENSION out_rows_avail);
+#ifdef QUANT_2PASS_SUPPORTED
+METHODDEF(void) process_data_crank_post(j_decompress_ptr cinfo,
+                                        JSAMPARRAY output_buf,
+                                        JDIMENSION *out_row_ctr,
+                                        JDIMENSION out_rows_avail);
+#endif
+
+
+LOCAL(void)
+alloc_funny_pointers(j_decompress_ptr cinfo)
+/* Allocate space for the funny pointer lists.
+ * This is done only once, not once per pass.
+ */
+{
+  my_main_ptr main_ptr = (my_main_ptr)cinfo->main;
+  int ci, rgroup;
+  int M = cinfo->_min_DCT_scaled_size;
+  jpeg_component_info *compptr;
+  JSAMPARRAY xbuf;
+
+  /* Get top-level space for component array pointers.
+   * We alloc both arrays with one call to save a few cycles.
+   */
+  main_ptr->xbuffer[0] = (JSAMPIMAGE)
+    (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE,
+                                cinfo->num_components * 2 * sizeof(JSAMPARRAY));
+  main_ptr->xbuffer[1] = main_ptr->xbuffer[0] + cinfo->num_components;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    rgroup = (compptr->v_samp_factor * compptr->_DCT_scaled_size) /
+      cinfo->_min_DCT_scaled_size; /* height of a row group of component */
+    /* Get space for pointer lists --- M+4 row groups in each list.
+     * We alloc both pointer lists with one call to save a few cycles.
+     */
+    xbuf = (JSAMPARRAY)
+      (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE,
+                                  2 * (rgroup * (M + 4)) * sizeof(JSAMPROW));
+    xbuf += rgroup;             /* want one row group at negative offsets */
+    main_ptr->xbuffer[0][ci] = xbuf;
+    xbuf += rgroup * (M + 4);
+    main_ptr->xbuffer[1][ci] = xbuf;
+  }
+}
+
+
+LOCAL(void)
+make_funny_pointers(j_decompress_ptr cinfo)
+/* Create the funny pointer lists discussed in the comments above.
+ * The actual workspace is already allocated (in main_ptr->buffer),
+ * and the space for the pointer lists is allocated too.
+ * This routine just fills in the curiously ordered lists.
+ * This will be repeated at the beginning of each pass.
+ */
+{
+  my_main_ptr main_ptr = (my_main_ptr)cinfo->main;
+  int ci, i, rgroup;
+  int M = cinfo->_min_DCT_scaled_size;
+  jpeg_component_info *compptr;
+  JSAMPARRAY buf, xbuf0, xbuf1;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    rgroup = (compptr->v_samp_factor * compptr->_DCT_scaled_size) /
+      cinfo->_min_DCT_scaled_size; /* height of a row group of component */
+    xbuf0 = main_ptr->xbuffer[0][ci];
+    xbuf1 = main_ptr->xbuffer[1][ci];
+    /* First copy the workspace pointers as-is */
+    buf = main_ptr->buffer[ci];
+    for (i = 0; i < rgroup * (M + 2); i++) {
+      xbuf0[i] = xbuf1[i] = buf[i];
+    }
+    /* In the second list, put the last four row groups in swapped order */
+    for (i = 0; i < rgroup * 2; i++) {
+      xbuf1[rgroup * (M - 2) + i] = buf[rgroup * M + i];
+      xbuf1[rgroup * M + i] = buf[rgroup * (M - 2) + i];
+    }
+    /* The wraparound pointers at top and bottom will be filled later
+     * (see set_wraparound_pointers, below).  Initially we want the "above"
+     * pointers to duplicate the first actual data line.  This only needs
+     * to happen in xbuffer[0].
+     */
+    for (i = 0; i < rgroup; i++) {
+      xbuf0[i - rgroup] = xbuf0[0];
+    }
+  }
+}
+
+
+LOCAL(void)
+set_bottom_pointers(j_decompress_ptr cinfo)
+/* Change the pointer lists to duplicate the last sample row at the bottom
+ * of the image.  whichptr indicates which xbuffer holds the final iMCU row.
+ * Also sets rowgroups_avail to indicate number of nondummy row groups in row.
+ */
+{
+  my_main_ptr main_ptr = (my_main_ptr)cinfo->main;
+  int ci, i, rgroup, iMCUheight, rows_left;
+  jpeg_component_info *compptr;
+  JSAMPARRAY xbuf;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Count sample rows in one iMCU row and in one row group */
+    iMCUheight = compptr->v_samp_factor * compptr->_DCT_scaled_size;
+    rgroup = iMCUheight / cinfo->_min_DCT_scaled_size;
+    /* Count nondummy sample rows remaining for this component */
+    rows_left = (int)(compptr->downsampled_height % (JDIMENSION)iMCUheight);
+    if (rows_left == 0) rows_left = iMCUheight;
+    /* Count nondummy row groups.  Should get same answer for each component,
+     * so we need only do it once.
+     */
+    if (ci == 0) {
+      main_ptr->rowgroups_avail = (JDIMENSION)((rows_left - 1) / rgroup + 1);
+    }
+    /* Duplicate the last real sample row rgroup*2 times; this pads out the
+     * last partial rowgroup and ensures at least one full rowgroup of context.
+     */
+    xbuf = main_ptr->xbuffer[main_ptr->whichptr][ci];
+    for (i = 0; i < rgroup * 2; i++) {
+      xbuf[rows_left + i] = xbuf[rows_left - 1];
+    }
+  }
+}
+
+
+/*
+ * Initialize for a processing pass.
+ */
+
+METHODDEF(void)
+start_pass_main(j_decompress_ptr cinfo, J_BUF_MODE pass_mode)
+{
+  my_main_ptr main_ptr = (my_main_ptr)cinfo->main;
+
+  switch (pass_mode) {
+  case JBUF_PASS_THRU:
+    if (cinfo->upsample->need_context_rows) {
+      main_ptr->pub.process_data = process_data_context_main;
+      make_funny_pointers(cinfo); /* Create the xbuffer[] lists */
+      main_ptr->whichptr = 0;   /* Read first iMCU row into xbuffer[0] */
+      main_ptr->context_state = CTX_PREPARE_FOR_IMCU;
+      main_ptr->iMCU_row_ctr = 0;
+    } else {
+      /* Simple case with no context needed */
+      main_ptr->pub.process_data = process_data_simple_main;
+    }
+    main_ptr->buffer_full = FALSE;      /* Mark buffer empty */
+    main_ptr->rowgroup_ctr = 0;
+    break;
+#ifdef QUANT_2PASS_SUPPORTED
+  case JBUF_CRANK_DEST:
+    /* For last pass of 2-pass quantization, just crank the postprocessor */
+    main_ptr->pub.process_data = process_data_crank_post;
+    break;
+#endif
+  default:
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    break;
+  }
+}
+
+
+/*
+ * Process some data.
+ * This handles the simple case where no context is required.
+ */
+
+METHODDEF(void)
+process_data_simple_main(j_decompress_ptr cinfo, JSAMPARRAY output_buf,
+                         JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)
+{
+  my_main_ptr main_ptr = (my_main_ptr)cinfo->main;
+  JDIMENSION rowgroups_avail;
+
+  /* Read input data if we haven't filled the main buffer yet */
+  if (!main_ptr->buffer_full) {
+    if (!(*cinfo->coef->decompress_data) (cinfo, main_ptr->buffer))
+      return;                   /* suspension forced, can do nothing more */
+    main_ptr->buffer_full = TRUE;       /* OK, we have an iMCU row to work with */
+  }
+
+  /* There are always min_DCT_scaled_size row groups in an iMCU row. */
+  rowgroups_avail = (JDIMENSION)cinfo->_min_DCT_scaled_size;
+  /* Note: at the bottom of the image, we may pass extra garbage row groups
+   * to the postprocessor.  The postprocessor has to check for bottom
+   * of image anyway (at row resolution), so no point in us doing it too.
+   */
+
+  /* Feed the postprocessor */
+  (*cinfo->post->post_process_data) (cinfo, main_ptr->buffer,
+                                     &main_ptr->rowgroup_ctr, rowgroups_avail,
+                                     output_buf, out_row_ctr, out_rows_avail);
+
+  /* Has postprocessor consumed all the data yet? If so, mark buffer empty */
+  if (main_ptr->rowgroup_ctr >= rowgroups_avail) {
+    main_ptr->buffer_full = FALSE;
+    main_ptr->rowgroup_ctr = 0;
+  }
+}
+
+
+/*
+ * Process some data.
+ * This handles the case where context rows must be provided.
+ */
+
+METHODDEF(void)
+process_data_context_main(j_decompress_ptr cinfo, JSAMPARRAY output_buf,
+                          JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)
+{
+  my_main_ptr main_ptr = (my_main_ptr)cinfo->main;
+
+  /* Read input data if we haven't filled the main buffer yet */
+  if (!main_ptr->buffer_full) {
+    if (!(*cinfo->coef->decompress_data) (cinfo,
+                                          main_ptr->xbuffer[main_ptr->whichptr]))
+      return;                   /* suspension forced, can do nothing more */
+    main_ptr->buffer_full = TRUE;       /* OK, we have an iMCU row to work with */
+    main_ptr->iMCU_row_ctr++;   /* count rows received */
+  }
+
+  /* Postprocessor typically will not swallow all the input data it is handed
+   * in one call (due to filling the output buffer first).  Must be prepared
+   * to exit and restart.  This switch lets us keep track of how far we got.
+   * Note that each case falls through to the next on successful completion.
+   */
+  switch (main_ptr->context_state) {
+  case CTX_POSTPONED_ROW:
+    /* Call postprocessor using previously set pointers for postponed row */
+    (*cinfo->post->post_process_data) (cinfo,
+                                       main_ptr->xbuffer[main_ptr->whichptr],
+                                       &main_ptr->rowgroup_ctr,
+                                       main_ptr->rowgroups_avail, output_buf,
+                                       out_row_ctr, out_rows_avail);
+    if (main_ptr->rowgroup_ctr < main_ptr->rowgroups_avail)
+      return;                   /* Need to suspend */
+    main_ptr->context_state = CTX_PREPARE_FOR_IMCU;
+    if (*out_row_ctr >= out_rows_avail)
+      return;                   /* Postprocessor exactly filled output buf */
+    /*FALLTHROUGH*/
+  case CTX_PREPARE_FOR_IMCU:
+    /* Prepare to process first M-1 row groups of this iMCU row */
+    main_ptr->rowgroup_ctr = 0;
+    main_ptr->rowgroups_avail = (JDIMENSION)(cinfo->_min_DCT_scaled_size - 1);
+    /* Check for bottom of image: if so, tweak pointers to "duplicate"
+     * the last sample row, and adjust rowgroups_avail to ignore padding rows.
+     */
+    if (main_ptr->iMCU_row_ctr == cinfo->total_iMCU_rows)
+      set_bottom_pointers(cinfo);
+    main_ptr->context_state = CTX_PROCESS_IMCU;
+    /*FALLTHROUGH*/
+  case CTX_PROCESS_IMCU:
+    /* Call postprocessor using previously set pointers */
+    (*cinfo->post->post_process_data) (cinfo,
+                                       main_ptr->xbuffer[main_ptr->whichptr],
+                                       &main_ptr->rowgroup_ctr,
+                                       main_ptr->rowgroups_avail, output_buf,
+                                       out_row_ctr, out_rows_avail);
+    if (main_ptr->rowgroup_ctr < main_ptr->rowgroups_avail)
+      return;                   /* Need to suspend */
+    /* After the first iMCU, change wraparound pointers to normal state */
+    if (main_ptr->iMCU_row_ctr == 1)
+      set_wraparound_pointers(cinfo);
+    /* Prepare to load new iMCU row using other xbuffer list */
+    main_ptr->whichptr ^= 1;    /* 0=>1 or 1=>0 */
+    main_ptr->buffer_full = FALSE;
+    /* Still need to process last row group of this iMCU row, */
+    /* which is saved at index M+1 of the other xbuffer */
+    main_ptr->rowgroup_ctr = (JDIMENSION)(cinfo->_min_DCT_scaled_size + 1);
+    main_ptr->rowgroups_avail = (JDIMENSION)(cinfo->_min_DCT_scaled_size + 2);
+    main_ptr->context_state = CTX_POSTPONED_ROW;
+  }
+}
+
+
+/*
+ * Process some data.
+ * Final pass of two-pass quantization: just call the postprocessor.
+ * Source data will be the postprocessor controller's internal buffer.
+ */
+
+#ifdef QUANT_2PASS_SUPPORTED
+
+METHODDEF(void)
+process_data_crank_post(j_decompress_ptr cinfo, JSAMPARRAY output_buf,
+                        JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)
+{
+  (*cinfo->post->post_process_data) (cinfo, (JSAMPIMAGE)NULL,
+                                     (JDIMENSION *)NULL, (JDIMENSION)0,
+                                     output_buf, out_row_ctr, out_rows_avail);
+}
+
+#endif /* QUANT_2PASS_SUPPORTED */
+
+
+/*
+ * Initialize main buffer controller.
+ */
+
+GLOBAL(void)
+jinit_d_main_controller(j_decompress_ptr cinfo, boolean need_full_buffer)
+{
+  my_main_ptr main_ptr;
+  int ci, rgroup, ngroups;
+  jpeg_component_info *compptr;
+
+  main_ptr = (my_main_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr)cinfo, JPOOL_IMAGE,
+                                sizeof(my_main_controller));
+  cinfo->main = (struct jpeg_d_main_controller *)main_ptr;
+  main_ptr->pub.start_pass = start_pass_main;
+
+  if (need_full_buffer)         /* shouldn't happen */
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+
+  /* Allocate the workspace.
+   * ngroups is the number of row groups we need.
+   */
+  if (cinfo->upsample->need_context_rows) {
+    if (cinfo->_min_DCT_scaled_size < 2) /* unsupported, see comments above */
+      ERREXIT(cinfo, JERR_NOTIMPL);
+    alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */
+    ngroups = cinfo->_min_DCT_scaled_size + 2;
+  } else {
+    ngroups = cinfo->_min_DCT_scaled_size;
+  }
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    rgroup = (compptr->v_samp_factor * compptr->_DCT_scaled_size) /
+      cinfo->_min_DCT_scaled_size; /* height of a row group of component */
+    main_ptr->buffer[ci] = (*cinfo->mem->alloc_sarray)
+                        ((j_common_ptr)cinfo, JPOOL_IMAGE,
+                         compptr->width_in_blocks * compptr->_DCT_scaled_size,
+                         (JDIMENSION)(rgroup * ngroups));
+  }
+}

data/ext/image_intensities/turbojpeg/jdmainct.h

@@ -0,0 +1,71 @@
+/*
+ * jdmainct.h
+ *
+ * This file was part of the Independent JPEG Group's software:
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * For conditions of distribution and use, see the accompanying README.ijg
+ * file.
+ */
+
+#define JPEG_INTERNALS
+#include "jpeglib.h"
+#include "jpegcomp.h"
+
+
+/* Private buffer controller object */
+
+typedef struct {
+  struct jpeg_d_main_controller pub; /* public fields */
+
+  /* Pointer to allocated workspace (M or M+2 row groups). */
+  JSAMPARRAY buffer[MAX_COMPONENTS];
+
+  boolean buffer_full;          /* Have we gotten an iMCU row from decoder? */
+  JDIMENSION rowgroup_ctr;      /* counts row groups output to postprocessor */
+
+  /* Remaining fields are only used in the context case. */
+
+  /* These are the master pointers to the funny-order pointer lists. */
+  JSAMPIMAGE xbuffer[2];        /* pointers to weird pointer lists */
+
+  int whichptr;                 /* indicates which pointer set is now in use */
+  int context_state;            /* process_data state machine status */
+  JDIMENSION rowgroups_avail;   /* row groups available to postprocessor */
+  JDIMENSION iMCU_row_ctr;      /* counts iMCU rows to detect image top/bot */
+} my_main_controller;
+
+typedef my_main_controller *my_main_ptr;
+
+
+/* context_state values: */
+#define CTX_PREPARE_FOR_IMCU    0       /* need to prepare for MCU row */
+#define CTX_PROCESS_IMCU        1       /* feeding iMCU to postprocessor */
+#define CTX_POSTPONED_ROW       2       /* feeding postponed row group */
+
+
+LOCAL(void)
+set_wraparound_pointers(j_decompress_ptr cinfo)
+/* Set up the "wraparound" pointers at top and bottom of the pointer lists.
+ * This changes the pointer list state from top-of-image to the normal state.
+ */
+{
+  my_main_ptr main_ptr = (my_main_ptr)cinfo->main;
+  int ci, i, rgroup;
+  int M = cinfo->_min_DCT_scaled_size;
+  jpeg_component_info *compptr;
+  JSAMPARRAY xbuf0, xbuf1;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    rgroup = (compptr->v_samp_factor * compptr->_DCT_scaled_size) /
+      cinfo->_min_DCT_scaled_size; /* height of a row group of component */
+    xbuf0 = main_ptr->xbuffer[0][ci];
+    xbuf1 = main_ptr->xbuffer[1][ci];
+    for (i = 0; i < rgroup; i++) {
+      xbuf0[i - rgroup] = xbuf0[rgroup * (M + 1) + i];
+      xbuf1[i - rgroup] = xbuf1[rgroup * (M + 1) + i];
+      xbuf0[rgroup * (M + 2) + i] = xbuf0[i];
+      xbuf1[rgroup * (M + 2) + i] = xbuf1[i];
+    }
+  }
+}