grpc 1.81.1 → 1.85.0

data/third_party/boringssl-with-bazel/include/openssl/des.h

@@ -49,30 +49,32 @@ typedef struct DES_ks {
 #define DES_CBC_MODE 0
 #define DES_PCBC_MODE 1
 
-// DES_set_key performs a key schedule and initialises |schedule| with |key|.
+// DES_set_key performs a key schedule and initialises `schedule` with `key`.
 OPENSSL_EXPORT void DES_set_key(const DES_cblock *key,
                                 DES_key_schedule *schedule);
 
 // DES_set_odd_parity sets the parity bits (the least-significant bits in each
-// byte) of |key| given the other bits in each byte.
+// byte) of `key` given the other bits in each byte.
 OPENSSL_EXPORT void DES_set_odd_parity(DES_cblock *key);
 
-// DES_ecb_encrypt encrypts (or decrypts, if |is_encrypt| is |DES_DECRYPT|) a
-// single DES block (8 bytes) from in to out, using the key configured in
-// |schedule|.
+// DES_ecb_encrypt encrypts (or decrypts, if `is_encrypt` is `DES_DECRYPT`) a
+// single DES block (8 bytes) from `in` to `out`, using the key configured in
+// `schedule`.
 OPENSSL_EXPORT void DES_ecb_encrypt(const DES_cblock *in, DES_cblock *out,
                                     const DES_key_schedule *schedule,
                                     int is_encrypt);
 
-// DES_ncbc_encrypt encrypts (or decrypts, if |enc| is |DES_DECRYPT|) |len|
-// bytes from |in| to |out| with DES in CBC mode.
+// DES_ncbc_encrypt encrypts (or decrypts, if `enc` is `DES_DECRYPT`) `len`
+// bytes from `in` to `out` with DES in CBC mode. `len` must be a multiple of 8.
+// The IV is taken from `ivec`. When the function completes, the IV for the next
+// block is written to `ivec`.
 OPENSSL_EXPORT void DES_ncbc_encrypt(const uint8_t *in, uint8_t *out,
                                      size_t len,
                                      const DES_key_schedule *schedule,
                                      DES_cblock *ivec, int enc);
 
-// DES_ecb3_encrypt encrypts (or decrypts, if |enc| is |DES_DECRYPT|) a single
-// block (8 bytes) of data from |input| to |output| using 3DES.
+// DES_ecb3_encrypt encrypts (or decrypts, if `enc` is `DES_DECRYPT`) a single
+// block (8 bytes) of data from `input` to `output` using 3DES.
 OPENSSL_EXPORT void DES_ecb3_encrypt(const DES_cblock *input,
                                      DES_cblock *output,
                                      const DES_key_schedule *ks1,
@@ -80,9 +82,11 @@ OPENSSL_EXPORT void DES_ecb3_encrypt(const DES_cblock *input,
                                      const DES_key_schedule *ks3,
                                      int enc);
 
-// DES_ede3_cbc_encrypt encrypts (or decrypts, if |enc| is |DES_DECRYPT|) |len|
-// bytes from |in| to |out| with 3DES in CBC mode. 3DES uses three keys, thus
-// the function takes three different |DES_key_schedule|s.
+// DES_ede3_cbc_encrypt encrypts (or decrypts, if `enc` is `DES_DECRYPT`) `len`
+// bytes from `in` to `out` with 3DES in CBC mode. 3DES uses three keys, thus
+// the function takes three different `DES_key_schedule`s. `len` must be a
+// multiple of 8. The IV is taken from `ivec`. When the function completes, the
+// IV for the next block is written to `ivec`.
 OPENSSL_EXPORT void DES_ede3_cbc_encrypt(const uint8_t *in, uint8_t *out,
                                          size_t len,
                                          const DES_key_schedule *ks1,
@@ -90,10 +94,12 @@ OPENSSL_EXPORT void DES_ede3_cbc_encrypt(const uint8_t *in, uint8_t *out,
                                          const DES_key_schedule *ks3,
                                          DES_cblock *ivec, int enc);
 
-// DES_ede2_cbc_encrypt encrypts (or decrypts, if |enc| is |DES_DECRYPT|) |len|
-// bytes from |in| to |out| with 3DES in CBC mode. With this keying option, the
+// DES_ede2_cbc_encrypt encrypts (or decrypts, if `enc` is `DES_DECRYPT`) `len`
+// bytes from `in` to `out` with 3DES in CBC mode. With this keying option, the
 // first and third 3DES keys are identical. Thus, this function takes only two
-// different |DES_key_schedule|s.
+// different `DES_key_schedule`s. `len` must be a multiple of 8. The IV is taken
+// from `ivec`. When the function completes, the IV for the next block is
+// written to `ivec`.
 OPENSSL_EXPORT void DES_ede2_cbc_encrypt(const uint8_t *in, uint8_t *out,
                                          size_t len,
                                          const DES_key_schedule *ks1,
@@ -103,7 +109,7 @@ OPENSSL_EXPORT void DES_ede2_cbc_encrypt(const uint8_t *in, uint8_t *out,
 
 // Deprecated functions.
 
-// DES_set_key_unchecked calls |DES_set_key|.
+// DES_set_key_unchecked calls `DES_set_key`.
 OPENSSL_EXPORT void DES_set_key_unchecked(const DES_cblock *key,
                                           DES_key_schedule *schedule);
 

data/third_party/boringssl-with-bazel/include/openssl/dh.h

@@ -17,8 +17,6 @@
 
 #include <openssl/base.h>   // IWYU pragma: export
 
-#include <openssl/thread.h>
-
 #if defined(__cplusplus)
 extern "C" {
 #endif
@@ -34,21 +32,21 @@ extern "C" {
 
 // Allocation and destruction.
 //
-// A |DH| object represents a Diffie-Hellman key or group parameters. A given
+// A `DH` object represents a Diffie-Hellman key or group parameters. A given
 // object may be used concurrently on multiple threads by non-mutating
 // functions, provided no other thread is concurrently calling a mutating
-// function. Unless otherwise documented, functions which take a |const| pointer
-// are non-mutating and functions which take a non-|const| pointer are mutating.
+// function. Unless otherwise documented, functions which take a `const` pointer
+// are non-mutating and functions which take a non-`const` pointer are mutating.
 
 // DH_new returns a new, empty DH object or NULL on error.
 OPENSSL_EXPORT DH *DH_new(void);
 
-// DH_free decrements the reference count of |dh| and frees it if the reference
+// DH_free decrements the reference count of `dh` and frees it if the reference
 // count drops to zero.
 OPENSSL_EXPORT void DH_free(DH *dh);
 
-// DH_up_ref increments the reference count of |dh| and returns one. It does not
-// mutate |dh| for thread-safety purposes and may be used concurrently.
+// DH_up_ref increments the reference count of `dh` and returns one. It does not
+// mutate `dh` for thread-safety purposes and may be used concurrently.
 OPENSSL_EXPORT int DH_up_ref(DH *dh);
 
 
@@ -56,51 +54,54 @@ OPENSSL_EXPORT int DH_up_ref(DH *dh);
 
 // OPENSSL_DH_MAX_MODULUS_BITS is the maximum supported Diffie-Hellman group
 // modulus, in bits.
-#define OPENSSL_DH_MAX_MODULUS_BITS 10000
+#define OPENSSL_DH_MAX_MODULUS_BITS 8192
 
-// DH_bits returns the size of |dh|'s group modulus, in bits.
+// DH_bits returns the size of `dh`'s group modulus, in bits.
 OPENSSL_EXPORT unsigned DH_bits(const DH *dh);
 
-// DH_get0_pub_key returns |dh|'s public key.
+// DH_size returns the number of bytes in the DH group's prime.
+OPENSSL_EXPORT int DH_size(const DH *dh);
+
+// DH_get0_pub_key returns `dh`'s public key.
 OPENSSL_EXPORT const BIGNUM *DH_get0_pub_key(const DH *dh);
 
-// DH_get0_priv_key returns |dh|'s private key, or NULL if |dh| is a public key.
+// DH_get0_priv_key returns `dh`'s private key, or NULL if `dh` is a public key.
 OPENSSL_EXPORT const BIGNUM *DH_get0_priv_key(const DH *dh);
 
-// DH_get0_p returns |dh|'s group modulus.
+// DH_get0_p returns `dh`'s group modulus.
 OPENSSL_EXPORT const BIGNUM *DH_get0_p(const DH *dh);
 
-// DH_get0_q returns the size of |dh|'s subgroup, or NULL if it is unset.
+// DH_get0_q returns the size of `dh`'s subgroup, or NULL if it is unset.
 OPENSSL_EXPORT const BIGNUM *DH_get0_q(const DH *dh);
 
-// DH_get0_g returns |dh|'s group generator.
+// DH_get0_g returns `dh`'s group generator.
 OPENSSL_EXPORT const BIGNUM *DH_get0_g(const DH *dh);
 
-// DH_get0_key sets |*out_pub_key| and |*out_priv_key|, if non-NULL, to |dh|'s
-// public and private key, respectively. If |dh| is a public key, the private
+// DH_get0_key sets `*out_pub_key` and `*out_priv_key`, if non-NULL, to `dh`'s
+// public and private key, respectively. If `dh` is a public key, the private
 // key will be set to NULL.
 OPENSSL_EXPORT void DH_get0_key(const DH *dh, const BIGNUM **out_pub_key,
                                 const BIGNUM **out_priv_key);
 
-// DH_set0_key sets |dh|'s public and private key to the specified values. If
+// DH_set0_key sets `dh`'s public and private key to the specified values. If
 // NULL, the field is left unchanged. On success, it takes ownership of each
 // argument and returns one. Otherwise, it returns zero.
 OPENSSL_EXPORT int DH_set0_key(DH *dh, BIGNUM *pub_key, BIGNUM *priv_key);
 
-// DH_get0_pqg sets |*out_p|, |*out_q|, and |*out_g|, if non-NULL, to |dh|'s p,
+// DH_get0_pqg sets `*out_p`, `*out_q`, and `*out_g`, if non-NULL, to `dh`'s p,
 // q, and g parameters, respectively.
 OPENSSL_EXPORT void DH_get0_pqg(const DH *dh, const BIGNUM **out_p,
                                 const BIGNUM **out_q, const BIGNUM **out_g);
 
-// DH_set0_pqg sets |dh|'s p, q, and g parameters to the specified values.  If
+// DH_set0_pqg sets `dh`'s p, q, and g parameters to the specified values.  If
 // NULL, the field is left unchanged. On success, it takes ownership of each
-// argument and returns one. Otherwise, it returns zero. |q| may be NULL, but
-// |p| and |g| must either be specified or already configured on |dh|.
+// argument and returns one. Otherwise, it returns zero. `q` may be NULL, but
+// `p` and `g` must either be specified or already configured on `dh`.
 OPENSSL_EXPORT int DH_set0_pqg(DH *dh, BIGNUM *p, BIGNUM *q, BIGNUM *g);
 
 // DH_set_length sets the number of bits to use for the secret exponent when
-// calling |DH_generate_key| on |dh| and returns one. If unset,
-// |DH_generate_key| will use the bit length of p.
+// calling `DH_generate_key` on `dh` and returns one. If unset,
+// `DH_generate_key` will use the bit length of p.
 OPENSSL_EXPORT int DH_set_length(DH *dh, unsigned priv_length);
 
 
@@ -111,34 +112,40 @@ OPENSSL_EXPORT int DH_set_length(DH *dh, unsigned priv_length);
 // of memory.
 OPENSSL_EXPORT DH *DH_get_rfc7919_2048(void);
 
-// BN_get_rfc3526_prime_1536 sets |*ret| to the 1536-bit MODP group from RFC
-// 3526 and returns |ret|. If |ret| is NULL then a fresh |BIGNUM| is allocated
-// and returned. It returns NULL on allocation failure.
+// BN_get_rfc3526_prime_1536 sets `*ret` to the 1536-bit MODP group from RFC
+// 3526 and returns `ret`. If `ret` is NULL then a fresh `BIGNUM` is allocated
+// and returned. It returns NULL on allocation failure. The generator for this
+// group is 2.
 OPENSSL_EXPORT BIGNUM *BN_get_rfc3526_prime_1536(BIGNUM *ret);
 
-// BN_get_rfc3526_prime_2048 sets |*ret| to the 2048-bit MODP group from RFC
-// 3526 and returns |ret|. If |ret| is NULL then a fresh |BIGNUM| is allocated
-// and returned. It returns NULL on allocation failure.
+// BN_get_rfc3526_prime_2048 sets `*ret` to the 2048-bit MODP group from RFC
+// 3526 and returns `ret`. If `ret` is NULL then a fresh `BIGNUM` is allocated
+// and returned. It returns NULL on allocation failure. The generator for this
+// group is 2.
 OPENSSL_EXPORT BIGNUM *BN_get_rfc3526_prime_2048(BIGNUM *ret);
 
-// BN_get_rfc3526_prime_3072 sets |*ret| to the 3072-bit MODP group from RFC
-// 3526 and returns |ret|. If |ret| is NULL then a fresh |BIGNUM| is allocated
-// and returned. It returns NULL on allocation failure.
+// BN_get_rfc3526_prime_3072 sets `*ret` to the 3072-bit MODP group from RFC
+// 3526 and returns `ret`. If `ret` is NULL then a fresh `BIGNUM` is allocated
+// and returned. It returns NULL on allocation failure. The generator for this
+// group is 2.
 OPENSSL_EXPORT BIGNUM *BN_get_rfc3526_prime_3072(BIGNUM *ret);
 
-// BN_get_rfc3526_prime_4096 sets |*ret| to the 4096-bit MODP group from RFC
-// 3526 and returns |ret|. If |ret| is NULL then a fresh |BIGNUM| is allocated
-// and returned. It returns NULL on allocation failure.
+// BN_get_rfc3526_prime_4096 sets `*ret` to the 4096-bit MODP group from RFC
+// 3526 and returns `ret`. If `ret` is NULL then a fresh `BIGNUM` is allocated
+// and returned. It returns NULL on allocation failure. The generator for this
+// group is 2.
 OPENSSL_EXPORT BIGNUM *BN_get_rfc3526_prime_4096(BIGNUM *ret);
 
-// BN_get_rfc3526_prime_6144 sets |*ret| to the 6144-bit MODP group from RFC
-// 3526 and returns |ret|. If |ret| is NULL then a fresh |BIGNUM| is allocated
-// and returned. It returns NULL on allocation failure.
+// BN_get_rfc3526_prime_6144 sets `*ret` to the 6144-bit MODP group from RFC
+// 3526 and returns `ret`. If `ret` is NULL then a fresh `BIGNUM` is allocated
+// and returned. It returns NULL on allocation failure. The generator for this
+// group is 2.
 OPENSSL_EXPORT BIGNUM *BN_get_rfc3526_prime_6144(BIGNUM *ret);
 
-// BN_get_rfc3526_prime_8192 sets |*ret| to the 8192-bit MODP group from RFC
-// 3526 and returns |ret|. If |ret| is NULL then a fresh |BIGNUM| is allocated
-// and returned. It returns NULL on allocation failure.
+// BN_get_rfc3526_prime_8192 sets `*ret` to the 8192-bit MODP group from RFC
+// 3526 and returns `ret`. If `ret` is NULL then a fresh `BIGNUM` is allocated
+// and returned. It returns NULL on allocation failure. The generator for this
+// group is 2.
 OPENSSL_EXPORT BIGNUM *BN_get_rfc3526_prime_8192(BIGNUM *ret);
 
 
@@ -148,12 +155,12 @@ OPENSSL_EXPORT BIGNUM *BN_get_rfc3526_prime_8192(BIGNUM *ret);
 #define DH_GENERATOR_5 5
 
 // DH_generate_parameters_ex generates a suitable Diffie-Hellman group with a
-// prime that is |prime_bits| long and stores it in |dh|. The generator of the
-// group will be |generator|, which should be |DH_GENERATOR_2| unless there's a
-// good reason to use a different value. The |cb| argument contains a callback
+// prime that is `prime_bits` long and stores it in `dh`. The generator of the
+// group will be `generator`, which should be `DH_GENERATOR_2` unless there's a
+// good reason to use a different value. The `cb` argument contains a callback
 // function that will be called during the generation. See the documentation in
-// |bn.h| about this. In addition to the callback invocations from |BN|, |cb|
-// will also be called with |event| equal to three when the generation is
+// `bn.h` about this. In addition to the callback invocations from `BN`, `cb`
+// will also be called with `event` equal to three when the generation is
 // complete.
 OPENSSL_EXPORT int DH_generate_parameters_ex(DH *dh, int prime_bits,
                                              int generator, BN_GENCB *cb);
@@ -162,43 +169,43 @@ OPENSSL_EXPORT int DH_generate_parameters_ex(DH *dh, int prime_bits,
 // Diffie-Hellman operations.
 
 // DH_generate_key generates a new, random, private key and stores it in
-// |dh|, if |dh| does not already have a private key. Otherwise, it updates
-// |dh|'s public key to match the private key. It returns one on success and
+// `dh`, if `dh` does not already have a private key. Otherwise, it updates
+// `dh`'s public key to match the private key. It returns one on success and
 // zero on error.
 OPENSSL_EXPORT int DH_generate_key(DH *dh);
 
-// DH_compute_key_padded calculates the shared key between |dh| and |peers_key|
-// and writes it as a big-endian integer into |out|, padded up to |DH_size|
-// bytes. It returns the number of bytes written, which is always |DH_size|, or
-// a negative number on error. |out| must have |DH_size| bytes of space.
+// DH_compute_key_padded calculates the shared key between `dh` and `peers_key`
+// and writes it as a big-endian integer into `out`, padded up to `DH_size`
+// bytes. It returns the number of bytes written, which is always `DH_size`, or
+// a negative number on error. `out` must have `DH_size` bytes of space.
 //
 // WARNING: this differs from the usual BoringSSL return-value convention.
 //
-// Note this function differs from |DH_compute_key| in that it preserves leading
+// Note this function differs from `DH_compute_key` in that it preserves leading
 // zeros in the secret. This function is the preferred variant. It matches PKCS
 // #3 and avoids some side channel attacks. However, the two functions are not
 // drop-in replacements for each other. Using a different variant than the
 // application expects will result in sporadic key mismatches.
 //
 // Callers that expect a fixed-width secret should use this function over
-// |DH_compute_key|. Callers that use either function should migrate to a modern
+// `DH_compute_key`. Callers that use either function should migrate to a modern
 // primitive such as X25519 or ECDH with P-256 instead.
 //
-// This function does not mutate |dh| for thread-safety purposes and may be used
+// This function does not mutate `dh` for thread-safety purposes and may be used
 // concurrently.
 OPENSSL_EXPORT int DH_compute_key_padded(uint8_t *out, const BIGNUM *peers_key,
                                          DH *dh);
 
-// DH_compute_key_hashed calculates the shared key between |dh| and |peers_key|
-// and hashes it with the given |digest|. If the hash output is less than
-// |max_out_len| bytes then it writes the hash output to |out| and sets
-// |*out_len| to the number of bytes written. Otherwise it signals an error. It
+// DH_compute_key_hashed calculates the shared key between `dh` and `peers_key`
+// and hashes it with the given `digest`. If the hash output is less than
+// `max_out_len` bytes then it writes the hash output to `out` and sets
+// `*out_len` to the number of bytes written. Otherwise it signals an error. It
 // returns one on success or zero on error.
 //
 // NOTE: this follows the usual BoringSSL return-value convention, but that's
-// different from |DH_compute_key| and |DH_compute_key_padded|.
+// different from `DH_compute_key` and `DH_compute_key_padded`.
 //
-// This function does not mutate |dh| for thread-safety purposes and may be used
+// This function does not mutate `dh` for thread-safety purposes and may be used
 // concurrently.
 OPENSSL_EXPORT int DH_compute_key_hashed(DH *dh, uint8_t *out, size_t *out_len,
                                          size_t max_out_len,
@@ -208,13 +215,6 @@ OPENSSL_EXPORT int DH_compute_key_hashed(DH *dh, uint8_t *out, size_t *out_len,
 
 // Utility functions.
 
-// DH_size returns the number of bytes in the DH group's prime.
-OPENSSL_EXPORT int DH_size(const DH *dh);
-
-// DH_num_bits returns the minimum number of bits needed to represent the
-// absolute value of the DH group's prime.
-OPENSSL_EXPORT unsigned DH_num_bits(const DH *dh);
-
 #define DH_CHECK_P_NOT_PRIME 0x01
 #define DH_CHECK_P_NOT_SAFE_PRIME 0x02
 #define DH_CHECK_UNABLE_TO_CHECK_GENERATOR 0x04
@@ -226,9 +226,9 @@ OPENSSL_EXPORT unsigned DH_num_bits(const DH *dh);
 #define DH_NOT_SUITABLE_GENERATOR DH_CHECK_NOT_SUITABLE_GENERATOR
 #define DH_UNABLE_TO_CHECK_GENERATOR DH_CHECK_UNABLE_TO_CHECK_GENERATOR
 
-// DH_check checks the suitability of |dh| as a Diffie-Hellman group. and sets
-// |DH_CHECK_*| flags in |*out_flags| if it finds any errors. It returns one if
-// |*out_flags| was successfully set and zero on error.
+// DH_check checks the suitability of `dh` as a Diffie-Hellman group. and sets
+// `DH_CHECK_*` flags in `*out_flags` if it finds any errors. It returns one if
+// `*out_flags` was successfully set and zero on error.
 //
 // Note: these checks may be quite computationally expensive.
 OPENSSL_EXPORT int DH_check(const DH *dh, int *out_flags);
@@ -237,73 +237,73 @@ OPENSSL_EXPORT int DH_check(const DH *dh, int *out_flags);
 #define DH_CHECK_PUBKEY_TOO_LARGE 0x2
 #define DH_CHECK_PUBKEY_INVALID 0x4
 
-// DH_check_pub_key checks the suitability of |pub_key| as a public key for the
-// DH group in |dh| and sets |DH_CHECK_PUBKEY_*| flags in |*out_flags| if it
-// finds any errors. It returns one if |*out_flags| was successfully set and
+// DH_check_pub_key checks the suitability of `pub_key` as a public key for the
+// DH group in `dh` and sets `DH_CHECK_PUBKEY_*` flags in `*out_flags` if it
+// finds any errors. It returns one if `*out_flags` was successfully set and
 // zero on error.
 OPENSSL_EXPORT int DH_check_pub_key(const DH *dh, const BIGNUM *pub_key,
                                     int *out_flags);
 
-// DHparams_dup allocates a fresh |DH| and copies the parameters from |dh| into
-// it. It returns the new |DH| or NULL on error.
+// DHparams_dup allocates a fresh `DH` and copies the parameters from `dh` into
+// it. It returns the new `DH` or NULL on error.
 OPENSSL_EXPORT DH *DHparams_dup(const DH *dh);
 
 
 // ASN.1 functions.
 
 // DH_parse_parameters decodes a DER-encoded DHParameter structure (PKCS #3)
-// from |cbs| and advances |cbs|. It returns a newly-allocated |DH| or NULL on
+// from `cbs` and advances `cbs`. It returns a newly-allocated `DH` or NULL on
 // error.
 OPENSSL_EXPORT DH *DH_parse_parameters(CBS *cbs);
 
-// DH_marshal_parameters marshals |dh| as a DER-encoded DHParameter structure
-// (PKCS #3) and appends the result to |cbb|. It returns one on success and zero
+// DH_marshal_parameters marshals `dh` as a DER-encoded DHParameter structure
+// (PKCS #3) and appends the result to `cbb`. It returns one on success and zero
 // on error.
 OPENSSL_EXPORT int DH_marshal_parameters(CBB *cbb, const DH *dh);
 
 
 // Deprecated functions.
 
-// DH_generate_parameters behaves like |DH_generate_parameters_ex|, which is
+// DH_generate_parameters behaves like `DH_generate_parameters_ex`, which is
 // what you should use instead. It returns NULL on error, or a newly-allocated
-// |DH| on success. This function is provided for compatibility only.
+// `DH` on success. This function is provided for compatibility only.
 OPENSSL_EXPORT DH *DH_generate_parameters(int prime_len, int generator,
                                           void (*callback)(int, int, void *),
                                           void *cb_arg);
 
-// d2i_DHparams parses a DER-encoded DHParameter structure (PKCS #3) from |len|
-// bytes at |*inp|, as in |d2i_SAMPLE|.
+// d2i_DHparams parses a DER-encoded DHParameter structure (PKCS #3) from `len`
+// bytes at `*inp`, as in `d2i_SAMPLE`.
 //
-// Use |DH_parse_parameters| instead.
+// Use `DH_parse_parameters` instead.
 OPENSSL_EXPORT DH *d2i_DHparams(DH **ret, const unsigned char **inp, long len);
 
-// i2d_DHparams marshals |in| to a DER-encoded DHParameter structure (PKCS #3),
-// as described in |i2d_SAMPLE|.
+// i2d_DHparams marshals `in` to a DER-encoded DHParameter structure (PKCS #3),
+// as described in `i2d_SAMPLE`.
 //
-// Use |DH_marshal_parameters| instead.
+// Use `DH_marshal_parameters` instead.
 OPENSSL_EXPORT int i2d_DHparams(const DH *in, unsigned char **outp);
 
-// DH_compute_key behaves like |DH_compute_key_padded| but, contrary to PKCS #3,
+// DH_compute_key behaves like `DH_compute_key_padded` but, contrary to PKCS #3,
 // returns a variable-length shared key with leading zeros. It returns the
-// number of bytes written, or a negative number on error. |out| must have
-// |DH_size| bytes of space.
+// number of bytes written, or a negative number on error. `out` must have
+// `DH_size` bytes of space.
 //
 // WARNING: this differs from the usual BoringSSL return-value convention.
 //
 // Note this function's running time and memory access pattern leaks information
-// about the shared secret. Particularly if |dh| is reused, this may result in
+// about the shared secret. Particularly if `dh` is reused, this may result in
 // side channel attacks such as https://raccoon-attack.com/.
 //
-// |DH_compute_key_padded| is the preferred variant and avoids the above
+// `DH_compute_key_padded` is the preferred variant and avoids the above
 // attacks. However, the two functions are not drop-in replacements for each
 // other. Using a different variant than the application expects will result in
 // sporadic key mismatches.
 //
-// Callers that expect a fixed-width secret should use |DH_compute_key_padded|
+// Callers that expect a fixed-width secret should use `DH_compute_key_padded`
 // instead. Callers that use either function should migrate to a modern
 // primitive such as X25519 or ECDH with P-256 instead.
 //
-// This function does not mutate |dh| for thread-safety purposes and may be used
+// This function does not mutate `dh` for thread-safety purposes and may be used
 // concurrently.
 OPENSSL_EXPORT int DH_compute_key(uint8_t *out, const BIGNUM *peers_key,
                                   DH *dh);