grpc 1.62.0 → 1.65.1

data/third_party/boringssl-with-bazel/src/include/openssl/asn1.h

@@ -1636,18 +1636,18 @@ OPENSSL_EXPORT int ASN1_STRING_print(BIO *out, const ASN1_STRING *str);
 
 // ASN1_STRFLGS_ESC_2253 causes characters to be escaped as in RFC 2253, section
 // 2.4.
-#define ASN1_STRFLGS_ESC_2253 1
+#define ASN1_STRFLGS_ESC_2253 1ul
 
 // ASN1_STRFLGS_ESC_CTRL causes all control characters to be escaped.
-#define ASN1_STRFLGS_ESC_CTRL 2
+#define ASN1_STRFLGS_ESC_CTRL 2ul
 
 // ASN1_STRFLGS_ESC_MSB causes all characters above 127 to be escaped.
-#define ASN1_STRFLGS_ESC_MSB 4
+#define ASN1_STRFLGS_ESC_MSB 4ul
 
 // ASN1_STRFLGS_ESC_QUOTE causes the string to be surrounded by quotes, rather
 // than using backslashes, when characters are escaped. Fewer characters will
 // require escapes in this case.
-#define ASN1_STRFLGS_ESC_QUOTE 8
+#define ASN1_STRFLGS_ESC_QUOTE 8ul
 
 // ASN1_STRFLGS_UTF8_CONVERT causes the string to be encoded as UTF-8, with each
 // byte in the UTF-8 encoding treated as an individual character for purposes of
@@ -1655,29 +1655,29 @@ OPENSSL_EXPORT int ASN1_STRING_print(BIO *out, const ASN1_STRING *str);
 // as a character, with wide characters escaped as "\Uxxxx" or "\Wxxxxxxxx".
 // Note this can be ambiguous if |ASN1_STRFLGS_ESC_*| are all unset. In that
 // case, backslashes are not escaped, but wide characters are.
-#define ASN1_STRFLGS_UTF8_CONVERT 0x10
+#define ASN1_STRFLGS_UTF8_CONVERT 0x10ul
 
 // ASN1_STRFLGS_IGNORE_TYPE causes the string type to be ignored. The
 // |ASN1_STRING| in-memory representation will be printed directly.
-#define ASN1_STRFLGS_IGNORE_TYPE 0x20
+#define ASN1_STRFLGS_IGNORE_TYPE 0x20ul
 
 // ASN1_STRFLGS_SHOW_TYPE causes the string type to be included in the output.
-#define ASN1_STRFLGS_SHOW_TYPE 0x40
+#define ASN1_STRFLGS_SHOW_TYPE 0x40ul
 
 // ASN1_STRFLGS_DUMP_ALL causes all strings to be printed as a hexdump, using
 // RFC 2253 hexstring notation, such as "#0123456789ABCDEF".
-#define ASN1_STRFLGS_DUMP_ALL 0x80
+#define ASN1_STRFLGS_DUMP_ALL 0x80ul
 
 // ASN1_STRFLGS_DUMP_UNKNOWN behaves like |ASN1_STRFLGS_DUMP_ALL| but only
 // applies to values of unknown type. If unset, unknown values will print
 // their contents as single-byte characters with escape sequences.
-#define ASN1_STRFLGS_DUMP_UNKNOWN 0x100
+#define ASN1_STRFLGS_DUMP_UNKNOWN 0x100ul
 
 // ASN1_STRFLGS_DUMP_DER causes hexdumped strings (as determined by
 // |ASN1_STRFLGS_DUMP_ALL| or |ASN1_STRFLGS_DUMP_UNKNOWN|) to print the entire
 // DER element as in RFC 2253, rather than only the contents of the
 // |ASN1_STRING|.
-#define ASN1_STRFLGS_DUMP_DER 0x200
+#define ASN1_STRFLGS_DUMP_DER 0x200ul
 
 // ASN1_STRFLGS_RFC2253 causes the string to be escaped as in RFC 2253,
 // additionally escaping control characters.

data/third_party/boringssl-with-bazel/src/include/openssl/base.h

@@ -109,7 +109,7 @@ extern "C" {
 // A consumer may use this symbol in the preprocessor to temporarily build
 // against multiple revisions of BoringSSL at the same time. It is not
 // recommended to do so for longer than is necessary.
-#define BORINGSSL_API_VERSION 29
+#define BORINGSSL_API_VERSION 32
 
 #if defined(BORINGSSL_SHARED_LIBRARY)
 
@@ -181,6 +181,13 @@ extern "C" {
 #define OPENSSL_PRINTF_FORMAT_FUNC(string_index, first_to_check)
 #endif
 
+// OPENSSL_CLANG_PRAGMA emits a pragma on clang and nothing on other compilers.
+#if defined(__clang__)
+#define OPENSSL_CLANG_PRAGMA(arg) _Pragma(arg)
+#else
+#define OPENSSL_CLANG_PRAGMA(arg)
+#endif
+
 // OPENSSL_MSVC_PRAGMA emits a pragma on MSVC and nothing on other compilers.
 #if defined(_MSC_VER)
 #define OPENSSL_MSVC_PRAGMA(arg) __pragma(arg)
@@ -358,6 +365,7 @@ typedef struct sha_state_st SHA_CTX;
 typedef struct spake2_ctx_st SPAKE2_CTX;
 typedef struct srtp_protection_profile_st SRTP_PROTECTION_PROFILE;
 typedef struct ssl_cipher_st SSL_CIPHER;
+typedef struct ssl_credential_st SSL_CREDENTIAL;
 typedef struct ssl_ctx_st SSL_CTX;
 typedef struct ssl_early_callback_ctx SSL_CLIENT_HELLO;
 typedef struct ssl_ech_keys_st SSL_ECH_KEYS;
@@ -378,11 +386,11 @@ typedef struct x509_attributes_st X509_ATTRIBUTE;
 typedef struct x509_lookup_st X509_LOOKUP;
 typedef struct x509_lookup_method_st X509_LOOKUP_METHOD;
 typedef struct x509_object_st X509_OBJECT;
+typedef struct x509_purpose_st X509_PURPOSE;
 typedef struct x509_revoked_st X509_REVOKED;
 typedef struct x509_st X509;
 typedef struct x509_store_ctx_st X509_STORE_CTX;
 typedef struct x509_store_st X509_STORE;
-typedef struct x509_trust_st X509_TRUST;
 
 typedef void *OPENSSL_BLOCK;
 

data/third_party/boringssl-with-bazel/src/include/openssl/bio.h

@@ -269,11 +269,11 @@ OPENSSL_EXPORT int BIO_set_close(BIO *bio, int close_flag);
 
 // BIO_number_read returns the number of bytes that have been read from
 // |bio|.
-OPENSSL_EXPORT size_t BIO_number_read(const BIO *bio);
+OPENSSL_EXPORT uint64_t BIO_number_read(const BIO *bio);
 
 // BIO_number_written returns the number of bytes that have been written to
 // |bio|.
-OPENSSL_EXPORT size_t BIO_number_written(const BIO *bio);
+OPENSSL_EXPORT uint64_t BIO_number_written(const BIO *bio);
 
 
 // Managing chains of BIOs.
@@ -473,41 +473,82 @@ OPENSSL_EXPORT int BIO_get_fd(BIO *bio, int *out_fd);
 OPENSSL_EXPORT const BIO_METHOD *BIO_s_file(void);
 
 // BIO_new_file creates a file BIO by opening |filename| with the given mode.
-// See the |fopen| manual page for details of the mode argument.
+// See the |fopen| manual page for details of the mode argument. On Windows,
+// files may be opened in either binary or text mode so, as in |fopen|, callers
+// must specify the desired option in |mode|.
 OPENSSL_EXPORT BIO *BIO_new_file(const char *filename, const char *mode);
 
-// BIO_new_fp creates a new file BIO that wraps the given |FILE|. If
-// |close_flag| is |BIO_CLOSE|, then |fclose| will be called on |stream| when
-// the BIO is closed.
-OPENSSL_EXPORT BIO *BIO_new_fp(FILE *stream, int close_flag);
+// BIO_FP_TEXT indicates the |FILE| should be switched to text mode on Windows.
+// It has no effect on non-Windows platforms.
+#define BIO_FP_TEXT 0x10
+
+// BIO_new_fp creates a new file BIO that wraps |file|. If |flags| contains
+// |BIO_CLOSE|, then |fclose| will be called on |file| when the BIO is closed.
+//
+// On Windows, if |flags| contains |BIO_FP_TEXT|, this function will
+// additionally switch |file| to text mode. This is not recommended, but may be
+// required for OpenSSL compatibility. If |file| was not already in text mode,
+// mode changes can cause unflushed data in |file| to be written in unexpected
+// ways. See |_setmode| in Windows documentation for details.
+//
+// Unlike OpenSSL, if |flags| does not contain |BIO_FP_TEXT|, the translation
+// mode of |file| is left as-is. In OpenSSL, |file| will be set to binary, with
+// the same pitfalls as above. BoringSSL does not do this so that wrapping a
+// |FILE| in a |BIO| will not inadvertently change its state.
+//
+// To avoid these pitfalls, callers should set the desired translation mode when
+// opening the file. If targeting just BoringSSL, this is sufficient. If
+// targeting both OpenSSL and BoringSSL, callers should set |BIO_FP_TEXT| to
+// match the desired state of the file.
+OPENSSL_EXPORT BIO *BIO_new_fp(FILE *file, int flags);
 
 // BIO_get_fp sets |*out_file| to the current |FILE| for |bio|. It returns one
 // on success and zero otherwise.
 OPENSSL_EXPORT int BIO_get_fp(BIO *bio, FILE **out_file);
 
-// BIO_set_fp sets the |FILE| for |bio|. If |close_flag| is |BIO_CLOSE| then
+// BIO_set_fp sets the |FILE| for |bio|. If |flags| contains |BIO_CLOSE| then
 // |fclose| will be called on |file| when |bio| is closed. It returns one on
 // success and zero otherwise.
-OPENSSL_EXPORT int BIO_set_fp(BIO *bio, FILE *file, int close_flag);
+//
+// On Windows, if |flags| contains |BIO_FP_TEXT|, this function will
+// additionally switch |file| to text mode. This is not recommended, but may be
+// required for OpenSSL compatibility. If |file| was not already in text mode,
+// mode changes can cause unflushed data in |file| to be written in unexpected
+// ways. See |_setmode| in Windows documentation for details.
+//
+// Unlike OpenSSL, if |flags| does not contain |BIO_FP_TEXT|, the translation
+// mode of |file| is left as-is. In OpenSSL, |file| will be set to binary, with
+// the same pitfalls as above. BoringSSL does not do this so that wrapping a
+// |FILE| in a |BIO| will not inadvertently change its state.
+//
+// To avoid these pitfalls, callers should set the desired translation mode when
+// opening the file. If targeting just BoringSSL, this is sufficient. If
+// targeting both OpenSSL and BoringSSL, callers should set |BIO_FP_TEXT| to
+// match the desired state of the file.
+OPENSSL_EXPORT int BIO_set_fp(BIO *bio, FILE *file, int flags);
 
 // BIO_read_filename opens |filename| for reading and sets the result as the
 // |FILE| for |bio|. It returns one on success and zero otherwise. The |FILE|
-// will be closed when |bio| is freed.
+// will be closed when |bio| is freed. On Windows, the file is opened in binary
+// mode.
 OPENSSL_EXPORT int BIO_read_filename(BIO *bio, const char *filename);
 
 // BIO_write_filename opens |filename| for writing and sets the result as the
 // |FILE| for |bio|. It returns one on success and zero otherwise. The |FILE|
-// will be closed when |bio| is freed.
+// will be closed when |bio| is freed. On Windows, the file is opened in binary
+// mode.
 OPENSSL_EXPORT int BIO_write_filename(BIO *bio, const char *filename);
 
 // BIO_append_filename opens |filename| for appending and sets the result as
 // the |FILE| for |bio|. It returns one on success and zero otherwise. The
-// |FILE| will be closed when |bio| is freed.
+// |FILE| will be closed when |bio| is freed. On Windows, the file is opened in
+// binary mode.
 OPENSSL_EXPORT int BIO_append_filename(BIO *bio, const char *filename);
 
 // BIO_rw_filename opens |filename| for reading and writing and sets the result
 // as the |FILE| for |bio|. It returns one on success and zero otherwise. The
-// |FILE| will be closed when |bio| is freed.
+// |FILE| will be closed when |bio| is freed. On Windows, the file is opened in
+// binary mode.
 OPENSSL_EXPORT int BIO_rw_filename(BIO *bio, const char *filename);
 
 // BIO_tell returns the file offset of |bio|, or a negative number on error or
@@ -673,33 +714,35 @@ OPENSSL_EXPORT void BIO_meth_free(BIO_METHOD *method);
 // and returns one. The function should return one on success and zero on
 // error.
 OPENSSL_EXPORT int BIO_meth_set_create(BIO_METHOD *method,
-                                       int (*create)(BIO *));
+                                       int (*create_func)(BIO *));
 
 // BIO_meth_set_destroy sets a function to release data associated with a |BIO|
 // and returns one. The function's return value is ignored.
 OPENSSL_EXPORT int BIO_meth_set_destroy(BIO_METHOD *method,
-                                        int (*destroy)(BIO *));
+                                        int (*destroy_func)(BIO *));
 
 // BIO_meth_set_write sets the implementation of |BIO_write| for |method| and
 // returns one. |BIO_METHOD|s which implement |BIO_write| should also implement
 // |BIO_CTRL_FLUSH|. (See |BIO_meth_set_ctrl|.)
 OPENSSL_EXPORT int BIO_meth_set_write(BIO_METHOD *method,
-                                      int (*write)(BIO *, const char *, int));
+                                      int (*write_func)(BIO *, const char *,
+                                                        int));
 
 // BIO_meth_set_read sets the implementation of |BIO_read| for |method| and
 // returns one.
 OPENSSL_EXPORT int BIO_meth_set_read(BIO_METHOD *method,
-                                     int (*read)(BIO *, char *, int));
+                                     int (*read_func)(BIO *, char *, int));
 
 // BIO_meth_set_gets sets the implementation of |BIO_gets| for |method| and
 // returns one.
 OPENSSL_EXPORT int BIO_meth_set_gets(BIO_METHOD *method,
-                                     int (*gets)(BIO *, char *, int));
+                                     int (*gets_func)(BIO *, char *, int));
 
 // BIO_meth_set_ctrl sets the implementation of |BIO_ctrl| for |method| and
 // returns one.
 OPENSSL_EXPORT int BIO_meth_set_ctrl(BIO_METHOD *method,
-                                     long (*ctrl)(BIO *, int, long, void *));
+                                     long (*ctrl_func)(BIO *, int, long,
+                                                       void *));
 
 // BIO_set_data sets custom data on |bio|. It may be retried with
 // |BIO_get_data|.
@@ -824,37 +867,37 @@ OPENSSL_EXPORT int BIO_meth_set_puts(BIO_METHOD *method,
 // or change the data in any way.
 #define BIO_FLAGS_MEM_RDONLY 0x200
 
-// These are the 'types' of BIOs
-#define BIO_TYPE_NONE 0
-#define BIO_TYPE_MEM (1 | 0x0400)
-#define BIO_TYPE_FILE (2 | 0x0400)
-#define BIO_TYPE_FD (4 | 0x0400 | 0x0100)
-#define BIO_TYPE_SOCKET (5 | 0x0400 | 0x0100)
-#define BIO_TYPE_NULL (6 | 0x0400)
-#define BIO_TYPE_SSL (7 | 0x0200)
-#define BIO_TYPE_MD (8 | 0x0200)                 // passive filter
-#define BIO_TYPE_BUFFER (9 | 0x0200)             // filter
-#define BIO_TYPE_CIPHER (10 | 0x0200)            // filter
-#define BIO_TYPE_BASE64 (11 | 0x0200)            // filter
-#define BIO_TYPE_CONNECT (12 | 0x0400 | 0x0100)  // socket - connect
-#define BIO_TYPE_ACCEPT (13 | 0x0400 | 0x0100)   // socket for accept
-#define BIO_TYPE_PROXY_CLIENT (14 | 0x0200)      // client proxy BIO
-#define BIO_TYPE_PROXY_SERVER (15 | 0x0200)      // server proxy BIO
-#define BIO_TYPE_NBIO_TEST (16 | 0x0200)         // server proxy BIO
-#define BIO_TYPE_NULL_FILTER (17 | 0x0200)
-#define BIO_TYPE_BER (18 | 0x0200)         // BER -> bin filter
-#define BIO_TYPE_BIO (19 | 0x0400)         // (half a) BIO pair
-#define BIO_TYPE_LINEBUFFER (20 | 0x0200)  // filter
-#define BIO_TYPE_DGRAM (21 | 0x0400 | 0x0100)
-#define BIO_TYPE_ASN1 (22 | 0x0200)  // filter
-#define BIO_TYPE_COMP (23 | 0x0200)  // filter
-
 // BIO_TYPE_DESCRIPTOR denotes that the |BIO| responds to the |BIO_C_SET_FD|
 // (|BIO_set_fd|) and |BIO_C_GET_FD| (|BIO_get_fd|) control hooks.
 #define BIO_TYPE_DESCRIPTOR 0x0100  // socket, fd, connect or accept
 #define BIO_TYPE_FILTER 0x0200
 #define BIO_TYPE_SOURCE_SINK 0x0400
 
+// These are the 'types' of BIOs
+#define BIO_TYPE_NONE 0
+#define BIO_TYPE_MEM (1 | BIO_TYPE_SOURCE_SINK)
+#define BIO_TYPE_FILE (2 | BIO_TYPE_SOURCE_SINK)
+#define BIO_TYPE_FD (4 | BIO_TYPE_SOURCE_SINK | BIO_TYPE_DESCRIPTOR)
+#define BIO_TYPE_SOCKET (5 | BIO_TYPE_SOURCE_SINK | BIO_TYPE_DESCRIPTOR)
+#define BIO_TYPE_NULL (6 | BIO_TYPE_SOURCE_SINK)
+#define BIO_TYPE_SSL (7 | BIO_TYPE_FILTER)
+#define BIO_TYPE_MD (8 | BIO_TYPE_FILTER)
+#define BIO_TYPE_BUFFER (9 | BIO_TYPE_FILTER)
+#define BIO_TYPE_CIPHER (10 | BIO_TYPE_FILTER)
+#define BIO_TYPE_BASE64 (11 | BIO_TYPE_FILTER)
+#define BIO_TYPE_CONNECT (12 | BIO_TYPE_SOURCE_SINK | BIO_TYPE_DESCRIPTOR)
+#define BIO_TYPE_ACCEPT (13 | BIO_TYPE_SOURCE_SINK | BIO_TYPE_DESCRIPTOR)
+#define BIO_TYPE_PROXY_CLIENT (14 | BIO_TYPE_FILTER)
+#define BIO_TYPE_PROXY_SERVER (15 | BIO_TYPE_FILTER)
+#define BIO_TYPE_NBIO_TEST (16 | BIO_TYPE_FILTER)
+#define BIO_TYPE_NULL_FILTER (17 | BIO_TYPE_FILTER)
+#define BIO_TYPE_BER (18 | BIO_TYPE_FILTER)       // BER -> bin filter
+#define BIO_TYPE_BIO (19 | BIO_TYPE_SOURCE_SINK)  // (half a) BIO pair
+#define BIO_TYPE_LINEBUFFER (20 | BIO_TYPE_FILTER)
+#define BIO_TYPE_DGRAM (21 | BIO_TYPE_SOURCE_SINK | BIO_TYPE_DESCRIPTOR)
+#define BIO_TYPE_ASN1 (22 | BIO_TYPE_FILTER)
+#define BIO_TYPE_COMP (23 | BIO_TYPE_FILTER)
+
 // BIO_TYPE_START is the first user-allocated |BIO| type. No pre-defined type,
 // flag bits aside, may exceed this value.
 #define BIO_TYPE_START 128
@@ -894,7 +937,7 @@ struct bio_st {
   // next_bio points to the next |BIO| in a chain. This |BIO| owns a reference
   // to |next_bio|.
   BIO *next_bio;  // used by filter BIOs
-  size_t num_read, num_write;
+  uint64_t num_read, num_write;
 };
 
 #define BIO_C_SET_CONNECT 100

data/third_party/boringssl-with-bazel/src/include/openssl/bytestring.h

@@ -58,17 +58,20 @@ struct cbs_st {
 
 // CBS_init sets |cbs| to point to |data|. It does not take ownership of
 // |data|.
-OPENSSL_EXPORT void CBS_init(CBS *cbs, const uint8_t *data, size_t len);
+OPENSSL_INLINE void CBS_init(CBS *cbs, const uint8_t *data, size_t len) {
+  cbs->data = data;
+  cbs->len = len;
+}
 
 // CBS_skip advances |cbs| by |len| bytes. It returns one on success and zero
 // otherwise.
 OPENSSL_EXPORT int CBS_skip(CBS *cbs, size_t len);
 
 // CBS_data returns a pointer to the contents of |cbs|.
-OPENSSL_EXPORT const uint8_t *CBS_data(const CBS *cbs);
+OPENSSL_INLINE const uint8_t *CBS_data(const CBS *cbs) { return cbs->data; }
 
 // CBS_len returns the number of bytes remaining in |cbs|.
-OPENSSL_EXPORT size_t CBS_len(const CBS *cbs);
+OPENSSL_INLINE size_t CBS_len(const CBS *cbs) { return cbs->len; }
 
 // CBS_stow copies the current contents of |cbs| into |*out_ptr| and
 // |*out_len|. If |*out_ptr| is not NULL, the contents are freed with
@@ -636,6 +639,9 @@ OPENSSL_EXPORT int CBB_flush_asn1_set_of(CBB *cbb);
 
 
 // Unicode utilities.
+//
+// These functions consider noncharacters (see section 23.7 from Unicode 15.0.0)
+// to be invalid code points and will treat them as an error condition.
 
 // The following functions read one Unicode code point from |cbs| with the
 // corresponding encoding and store it in |*out|. They return one on success and
@@ -650,7 +656,9 @@ OPENSSL_EXPORT int CBS_get_utf32_be(CBS *cbs, uint32_t *out);
 OPENSSL_EXPORT size_t CBB_get_utf8_len(uint32_t u);
 
 // The following functions encode |u| to |cbb| with the corresponding
-// encoding. They return one on success and zero on error.
+// encoding. They return one on success and zero on error. Error conditions
+// include |u| being an invalid code point, or |u| being unencodable in the
+// specified encoding.
 OPENSSL_EXPORT int CBB_add_utf8(CBB *cbb, uint32_t u);
 OPENSSL_EXPORT int CBB_add_latin1(CBB *cbb, uint32_t u);
 OPENSSL_EXPORT int CBB_add_ucs2_be(CBB *cbb, uint32_t u);

data/third_party/boringssl-with-bazel/src/include/openssl/crypto.h

@@ -162,6 +162,7 @@ OPENSSL_EXPORT void OPENSSL_load_builtin_modules(void);
 #define OPENSSL_INIT_NO_ADD_ALL_DIGESTS 0
 #define OPENSSL_INIT_LOAD_CONFIG 0
 #define OPENSSL_INIT_NO_LOAD_CONFIG 0
+#define OPENSSL_INIT_NO_ATEXIT 0
 
 // OPENSSL_init_crypto calls |CRYPTO_library_init| and returns one.
 OPENSSL_EXPORT int OPENSSL_init_crypto(uint64_t opts,
@@ -177,6 +178,9 @@ OPENSSL_EXPORT int FIPS_mode_set(int on);
 // FIPS_module_name returns the name of the FIPS module.
 OPENSSL_EXPORT const char *FIPS_module_name(void);
 
+// FIPS_module_hash returns the 32-byte hash of the FIPS module.
+OPENSSL_EXPORT const uint8_t* FIPS_module_hash(void);
+
 // FIPS_version returns the version of the FIPS module, or zero if the build
 // isn't exactly at a verified version. The version, expressed in base 10, will
 // be a date in the form yyyymmddXX where XX is often "00", but can be

data/third_party/boringssl-with-bazel/src/include/openssl/dh.h

@@ -75,6 +75,12 @@ extern "C" {
 
 
 // Allocation and destruction.
+//
+// A |DH| object represents a Diffie-Hellman key or group parameters. A given
+// object may be used concurrently on multiple threads by non-mutating
+// functions, provided no other thread is concurrently calling a mutating
+// function. Unless otherwise documented, functions which take a |const| pointer
+// are non-mutating and functions which take a non-|const| pointer are mutating.
 
 // DH_new returns a new, empty DH object or NULL on error.
 OPENSSL_EXPORT DH *DH_new(void);
@@ -83,7 +89,8 @@ OPENSSL_EXPORT DH *DH_new(void);
 // count drops to zero.
 OPENSSL_EXPORT void DH_free(DH *dh);
 
-// DH_up_ref increments the reference count of |dh| and returns one.
+// DH_up_ref increments the reference count of |dh| and returns one. It does not
+// mutate |dh| for thread-safety purposes and may be used concurrently.
 OPENSSL_EXPORT int DH_up_ref(DH *dh);
 
 
@@ -214,6 +221,9 @@ OPENSSL_EXPORT int DH_generate_key(DH *dh);
 // Callers that expect a fixed-width secret should use this function over
 // |DH_compute_key|. Callers that use either function should migrate to a modern
 // primitive such as X25519 or ECDH with P-256 instead.
+//
+// This function does not mutate |dh| for thread-safety purposes and may be used
+// concurrently.
 OPENSSL_EXPORT int DH_compute_key_padded(uint8_t *out, const BIGNUM *peers_key,
                                          DH *dh);
 
@@ -225,6 +235,9 @@ OPENSSL_EXPORT int DH_compute_key_padded(uint8_t *out, const BIGNUM *peers_key,
 //
 // NOTE: this follows the usual BoringSSL return-value convention, but that's
 // different from |DH_compute_key| and |DH_compute_key_padded|.
+//
+// This function does not mutate |dh| for thread-safety purposes and may be used
+// concurrently.
 OPENSSL_EXPORT int DH_compute_key_hashed(DH *dh, uint8_t *out, size_t *out_len,
                                          size_t max_out_len,
                                          const BIGNUM *peers_key,
@@ -327,6 +340,9 @@ OPENSSL_EXPORT int i2d_DHparams(const DH *in, unsigned char **outp);
 // Callers that expect a fixed-width secret should use |DH_compute_key_padded|
 // instead. Callers that use either function should migrate to a modern
 // primitive such as X25519 or ECDH with P-256 instead.
+//
+// This function does not mutate |dh| for thread-safety purposes and may be used
+// concurrently.
 OPENSSL_EXPORT int DH_compute_key(uint8_t *out, const BIGNUM *peers_key,
                                   DH *dh);
 

data/third_party/boringssl-with-bazel/src/include/openssl/dsa.h

@@ -78,6 +78,12 @@ extern "C" {
 
 
 // Allocation and destruction.
+//
+// A |DSA| object represents a DSA key or group parameters. A given object may
+// be used concurrently on multiple threads by non-mutating functions, provided
+// no other thread is concurrently calling a mutating function. Unless otherwise
+// documented, functions which take a |const| pointer are non-mutating and
+// functions which take a non-|const| pointer are mutating.
 
 // DSA_new returns a new, empty DSA object or NULL on error.
 OPENSSL_EXPORT DSA *DSA_new(void);
@@ -86,7 +92,8 @@ OPENSSL_EXPORT DSA *DSA_new(void);
 // reference count drops to zero.
 OPENSSL_EXPORT void DSA_free(DSA *dsa);
 
-// DSA_up_ref increments the reference count of |dsa| and returns one.
+// DSA_up_ref increments the reference count of |dsa| and returns one. It does
+// not mutate |dsa| for thread-safety purposes and may be used concurrently.
 OPENSSL_EXPORT int DSA_up_ref(DSA *dsa);
 
 
@@ -216,7 +223,7 @@ OPENSSL_EXPORT DSA_SIG *DSA_do_sign(const uint8_t *digest, size_t digest_len,
 //
 // TODO(fork): deprecate.
 OPENSSL_EXPORT int DSA_do_verify(const uint8_t *digest, size_t digest_len,
-                                 DSA_SIG *sig, const DSA *dsa);
+                                 const DSA_SIG *sig, const DSA *dsa);
 
 // DSA_do_check_signature sets |*out_valid| to zero. Then it verifies that |sig|
 // is a valid signature, by the public key in |dsa| of the hash in |digest|
@@ -225,7 +232,7 @@ OPENSSL_EXPORT int DSA_do_verify(const uint8_t *digest, size_t digest_len,
 // It returns one if it was able to verify the signature as valid or invalid,
 // and zero on error.
 OPENSSL_EXPORT int DSA_do_check_signature(int *out_valid, const uint8_t *digest,
-                                          size_t digest_len, DSA_SIG *sig,
+                                          size_t digest_len, const DSA_SIG *sig,
                                           const DSA *dsa);
 
 

data/third_party/boringssl-with-bazel/src/include/openssl/err.h

@@ -244,6 +244,19 @@ OPENSSL_EXPORT const char *ERR_lib_error_string(uint32_t packed_error);
 // |packed_error|, or a placeholder string if the reason is unrecognized.
 OPENSSL_EXPORT const char *ERR_reason_error_string(uint32_t packed_error);
 
+// ERR_lib_symbol_name returns the symbol name of library that generated
+// |packed_error|, or NULL if unrecognized. For example, an error from
+// |ERR_LIB_EVP| would return "EVP".
+OPENSSL_EXPORT const char *ERR_lib_symbol_name(uint32_t packed_error);
+
+// ERR_reason_symbol_name returns the symbol name of the reason for
+// |packed_error|, or NULL if unrecognized. For example, |ERR_R_INTERNAL_ERROR|
+// would return "INTERNAL_ERROR".
+//
+// Errors from the |ERR_LIB_SYS| library are typically |errno| values and will
+// return NULL. User-defined errors will also return NULL.
+OPENSSL_EXPORT const char *ERR_reason_symbol_name(uint32_t packed_error);
+
 // ERR_print_errors_callback_t is the type of a function used by
 // |ERR_print_errors_cb|. It takes a pointer to a human readable string (and
 // its length) that describes an entry in the error queue. The |ctx| argument

data/third_party/boringssl-with-bazel/src/include/openssl/evp.h

@@ -136,10 +136,6 @@ OPENSSL_EXPORT int EVP_PKEY_bits(const EVP_PKEY *pkey);
 // values.
 OPENSSL_EXPORT int EVP_PKEY_id(const EVP_PKEY *pkey);
 
-// EVP_PKEY_type returns |nid| if |nid| is a known key type and |NID_undef|
-// otherwise.
-OPENSSL_EXPORT int EVP_PKEY_type(int nid);
-
 
 // Getting and setting concrete public key types.
 //
@@ -171,6 +167,11 @@ OPENSSL_EXPORT int EVP_PKEY_assign_EC_KEY(EVP_PKEY *pkey, EC_KEY *key);
 OPENSSL_EXPORT EC_KEY *EVP_PKEY_get0_EC_KEY(const EVP_PKEY *pkey);
 OPENSSL_EXPORT EC_KEY *EVP_PKEY_get1_EC_KEY(const EVP_PKEY *pkey);
 
+OPENSSL_EXPORT int EVP_PKEY_set1_DH(EVP_PKEY *pkey, DH *key);
+OPENSSL_EXPORT int EVP_PKEY_assign_DH(EVP_PKEY *pkey, DH *key);
+OPENSSL_EXPORT DH *EVP_PKEY_get0_DH(const EVP_PKEY *pkey);
+OPENSSL_EXPORT DH *EVP_PKEY_get1_DH(const EVP_PKEY *pkey);
+
 #define EVP_PKEY_NONE NID_undef
 #define EVP_PKEY_RSA NID_rsaEncryption
 #define EVP_PKEY_RSA_PSS NID_rsassaPss
@@ -179,6 +180,7 @@ OPENSSL_EXPORT EC_KEY *EVP_PKEY_get1_EC_KEY(const EVP_PKEY *pkey);
 #define EVP_PKEY_ED25519 NID_ED25519
 #define EVP_PKEY_X25519 NID_X25519
 #define EVP_PKEY_HKDF NID_hkdf
+#define EVP_PKEY_DH NID_dhKeyAgreement
 
 // EVP_PKEY_set_type sets the type of |pkey| to |type|. It returns one if
 // successful or zero if the |type| argument is not one of the |EVP_PKEY_*|
@@ -814,11 +816,23 @@ OPENSSL_EXPORT int EVP_PKEY_CTX_set_ec_paramgen_curve_nid(EVP_PKEY_CTX *ctx,
                                                           int nid);
 
 
-// Deprecated functions.
+// Diffie-Hellman-specific control functions.
 
-// EVP_PKEY_DH is defined for compatibility, but it is impossible to create an
-// |EVP_PKEY| of that type.
-#define EVP_PKEY_DH NID_dhKeyAgreement
+// EVP_PKEY_CTX_set_dh_pad configures configures whether |ctx|, which must be an
+// |EVP_PKEY_derive| operation, configures the handling of leading zeros in the
+// Diffie-Hellman shared secret. If |pad| is zero, leading zeros are removed
+// from the secret. If |pad| is non-zero, the fixed-width shared secret is used
+// unmodified, as in PKCS #3. If this function is not called, the default is to
+// remove leading zeros.
+//
+// WARNING: The behavior when |pad| is zero leaks information about the shared
+// secret. This may result in side channel attacks such as
+// https://raccoon-attack.com/, particularly when the same private key is used
+// for multiple operations.
+OPENSSL_EXPORT int EVP_PKEY_CTX_set_dh_pad(EVP_PKEY_CTX *ctx, int pad);
+
+
+// Deprecated functions.
 
 // EVP_PKEY_RSA2 was historically an alternate form for RSA public keys (OID
 // 2.5.8.1.1), but is no longer accepted.
@@ -917,12 +931,6 @@ OPENSSL_EXPORT EVP_PKEY *d2i_AutoPrivateKey(EVP_PKEY **out, const uint8_t **inp,
 OPENSSL_EXPORT EVP_PKEY *d2i_PublicKey(int type, EVP_PKEY **out,
                                        const uint8_t **inp, long len);
 
-// EVP_PKEY_get0_DH returns NULL.
-OPENSSL_EXPORT DH *EVP_PKEY_get0_DH(const EVP_PKEY *pkey);
-
-// EVP_PKEY_get1_DH returns NULL.
-OPENSSL_EXPORT DH *EVP_PKEY_get1_DH(const EVP_PKEY *pkey);
-
 // EVP_PKEY_CTX_set_ec_param_enc returns one if |encoding| is
 // |OPENSSL_EC_NAMED_CURVE| or zero with an error otherwise.
 OPENSSL_EXPORT int EVP_PKEY_CTX_set_ec_param_enc(EVP_PKEY_CTX *ctx,
@@ -1036,6 +1044,9 @@ OPENSSL_EXPORT int EVP_PKEY_CTX_set_dsa_paramgen_q_bits(EVP_PKEY_CTX *ctx,
 // Use the |EVP_PKEY_assign_*| functions instead.
 OPENSSL_EXPORT int EVP_PKEY_assign(EVP_PKEY *pkey, int type, void *key);
 
+// EVP_PKEY_type returns |nid|.
+OPENSSL_EXPORT int EVP_PKEY_type(int nid);
+
 
 // Preprocessor compatibility section (hidden).
 //

data/third_party/boringssl-with-bazel/src/include/openssl/evp_errors.h

@@ -95,5 +95,6 @@
 #define EVP_R_NOT_XOF_OR_INVALID_LENGTH 135
 #define EVP_R_EMPTY_PSK 136
 #define EVP_R_INVALID_BUFFER_SIZE 137
+#define EVP_R_EXPECTING_A_DH_KEY 138
 
 #endif  // OPENSSL_HEADER_EVP_ERRORS_H

data/third_party/boringssl-with-bazel/src/include/openssl/ex_data.h

@@ -129,11 +129,11 @@ typedef struct crypto_ex_data_st CRYPTO_EX_DATA;
 
 
 // Type-specific functions.
-//
-// Each type that supports ex_data provides three functions:
 
 #if 0  // Sample
 
+// Each type that supports ex_data provides three functions:
+
 // TYPE_get_ex_new_index allocates a new index for |TYPE|. An optional
 // |free_func| argument may be provided which is called when the owning object
 // is destroyed. See |CRYPTO_EX_free| for details. The |argl| and |argp|
@@ -153,6 +153,18 @@ OPENSSL_EXPORT int TYPE_set_ex_data(TYPE *t, int index, void *arg);
 // previous call to |TYPE_get_ex_new_index|.
 OPENSSL_EXPORT void *TYPE_get_ex_data(const TYPE *t, int index);
 
+// Some types additionally preallocate index zero, with all callbacks set to
+// NULL. Applications that do not need the general ex_data machinery may use
+// this instead.
+
+// TYPE_set_app_data sets |t|'s application data pointer to |arg|. It returns
+// one on success and zero on error.
+OPENSSL_EXPORT int TYPE_set_app_data(TYPE *t, void *arg);
+
+// TYPE_get_app_data returns the application data pointer for |t|, or NULL if no
+// such pointer exists.
+OPENSSL_EXPORT void *TYPE_get_app_data(const TYPE *t);
+
 #endif  // Sample
 
 
@@ -167,7 +179,7 @@ OPENSSL_EXPORT void *TYPE_get_ex_data(const TYPE *t, int index);
 // |parent|. As |parent| will shortly be destroyed, callers must not perform
 // operations that would increment its reference count, pass ownership, or
 // assume the object outlives the function call. The arguments |argl| and |argp|
-// contain opaque values that were given to |CRYPTO_get_ex_new_index|.
+// contain opaque values that were given to |CRYPTO_get_ex_new_index_ex|.
 //
 // This callback may be called with a NULL value for |ptr| if |parent| has no
 // value set for this index. However, the callbacks may also be skipped entirely