grpc 1.55.0 → 1.58.0

data/third_party/zlib/gzread.c

@@ -1,650 +0,0 @@
-/* gzread.c -- zlib functions for reading gzip files
- * Copyright (C) 2004-2017 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-/* Local functions */
-local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *));
-local int gz_avail OF((gz_statep));
-local int gz_look OF((gz_statep));
-local int gz_decomp OF((gz_statep));
-local int gz_fetch OF((gz_statep));
-local int gz_skip OF((gz_statep, z_off64_t));
-local z_size_t gz_read OF((gz_statep, voidp, z_size_t));
-
-/* Use read() to load a buffer -- return -1 on error, otherwise 0.  Read from
-   state->fd, and update state->eof, state->err, and state->msg as appropriate.
-   This function needs to loop on read(), since read() is not guaranteed to
-   read the number of bytes requested, depending on the type of descriptor. */
-local int gz_load(state, buf, len, have)
-    gz_statep state;
-    unsigned char *buf;
-    unsigned len;
-    unsigned *have;
-{
-    int ret;
-    unsigned get, max = ((unsigned)-1 >> 2) + 1;
-
-    *have = 0;
-    do {
-        get = len - *have;
-        if (get > max)
-            get = max;
-        ret = read(state->fd, buf + *have, get);
-        if (ret <= 0)
-            break;
-        *have += (unsigned)ret;
-    } while (*have < len);
-    if (ret < 0) {
-        gz_error(state, Z_ERRNO, zstrerror());
-        return -1;
-    }
-    if (ret == 0)
-        state->eof = 1;
-    return 0;
-}
-
-/* Load up input buffer and set eof flag if last data loaded -- return -1 on
-   error, 0 otherwise.  Note that the eof flag is set when the end of the input
-   file is reached, even though there may be unused data in the buffer.  Once
-   that data has been used, no more attempts will be made to read the file.
-   If strm->avail_in != 0, then the current data is moved to the beginning of
-   the input buffer, and then the remainder of the buffer is loaded with the
-   available data from the input file. */
-local int gz_avail(state)
-    gz_statep state;
-{
-    unsigned got;
-    z_streamp strm = &(state->strm);
-
-    if (state->err != Z_OK && state->err != Z_BUF_ERROR)
-        return -1;
-    if (state->eof == 0) {
-        if (strm->avail_in) {       /* copy what's there to the start */
-            unsigned char *p = state->in;
-            unsigned const char *q = strm->next_in;
-            unsigned n = strm->avail_in;
-            do {
-                *p++ = *q++;
-            } while (--n);
-        }
-        if (gz_load(state, state->in + strm->avail_in,
-                    state->size - strm->avail_in, &got) == -1)
-            return -1;
-        strm->avail_in += got;
-        strm->next_in = state->in;
-    }
-    return 0;
-}
-
-/* Look for gzip header, set up for inflate or copy.  state->x.have must be 0.
-   If this is the first time in, allocate required memory.  state->how will be
-   left unchanged if there is no more input data available, will be set to COPY
-   if there is no gzip header and direct copying will be performed, or it will
-   be set to GZIP for decompression.  If direct copying, then leftover input
-   data from the input buffer will be copied to the output buffer.  In that
-   case, all further file reads will be directly to either the output buffer or
-   a user buffer.  If decompressing, the inflate state will be initialized.
-   gz_look() will return 0 on success or -1 on failure. */
-local int gz_look(state)
-    gz_statep state;
-{
-    z_streamp strm = &(state->strm);
-
-    /* allocate read buffers and inflate memory */
-    if (state->size == 0) {
-        /* allocate buffers */
-        state->in = (unsigned char *)malloc(state->want);
-        state->out = (unsigned char *)malloc(state->want << 1);
-        if (state->in == NULL || state->out == NULL) {
-            free(state->out);
-            free(state->in);
-            gz_error(state, Z_MEM_ERROR, "out of memory");
-            return -1;
-        }
-        state->size = state->want;
-
-        /* allocate inflate memory */
-        state->strm.zalloc = Z_NULL;
-        state->strm.zfree = Z_NULL;
-        state->strm.opaque = Z_NULL;
-        state->strm.avail_in = 0;
-        state->strm.next_in = Z_NULL;
-        if (inflateInit2(&(state->strm), 15 + 16) != Z_OK) {    /* gunzip */
-            free(state->out);
-            free(state->in);
-            state->size = 0;
-            gz_error(state, Z_MEM_ERROR, "out of memory");
-            return -1;
-        }
-    }
-
-    /* get at least the magic bytes in the input buffer */
-    if (strm->avail_in < 2) {
-        if (gz_avail(state) == -1)
-            return -1;
-        if (strm->avail_in == 0)
-            return 0;
-    }
-
-    /* look for gzip magic bytes -- if there, do gzip decoding (note: there is
-       a logical dilemma here when considering the case of a partially written
-       gzip file, to wit, if a single 31 byte is written, then we cannot tell
-       whether this is a single-byte file, or just a partially written gzip
-       file -- for here we assume that if a gzip file is being written, then
-       the header will be written in a single operation, so that reading a
-       single byte is sufficient indication that it is not a gzip file) */
-    if (strm->avail_in > 1 &&
-            strm->next_in[0] == 31 && strm->next_in[1] == 139) {
-        inflateReset(strm);
-        state->how = GZIP;
-        state->direct = 0;
-        return 0;
-    }
-
-    /* no gzip header -- if we were decoding gzip before, then this is trailing
-       garbage.  Ignore the trailing garbage and finish. */
-    if (state->direct == 0) {
-        strm->avail_in = 0;
-        state->eof = 1;
-        state->x.have = 0;
-        return 0;
-    }
-
-    /* doing raw i/o, copy any leftover input to output -- this assumes that
-       the output buffer is larger than the input buffer, which also assures
-       space for gzungetc() */
-    state->x.next = state->out;
-    memcpy(state->x.next, strm->next_in, strm->avail_in);
-    state->x.have = strm->avail_in;
-    strm->avail_in = 0;
-    state->how = COPY;
-    state->direct = 1;
-    return 0;
-}
-
-/* Decompress from input to the provided next_out and avail_out in the state.
-   On return, state->x.have and state->x.next point to the just decompressed
-   data.  If the gzip stream completes, state->how is reset to LOOK to look for
-   the next gzip stream or raw data, once state->x.have is depleted.  Returns 0
-   on success, -1 on failure. */
-local int gz_decomp(state)
-    gz_statep state;
-{
-    int ret = Z_OK;
-    unsigned had;
-    z_streamp strm = &(state->strm);
-
-    /* fill output buffer up to end of deflate stream */
-    had = strm->avail_out;
-    do {
-        /* get more input for inflate() */
-        if (strm->avail_in == 0 && gz_avail(state) == -1)
-            return -1;
-        if (strm->avail_in == 0) {
-            gz_error(state, Z_BUF_ERROR, "unexpected end of file");
-            break;
-        }
-
-        /* decompress and handle errors */
-        ret = inflate(strm, Z_NO_FLUSH);
-        if (ret == Z_STREAM_ERROR || ret == Z_NEED_DICT) {
-            gz_error(state, Z_STREAM_ERROR,
-                     "internal error: inflate stream corrupt");
-            return -1;
-        }
-        if (ret == Z_MEM_ERROR) {
-            gz_error(state, Z_MEM_ERROR, "out of memory");
-            return -1;
-        }
-        if (ret == Z_DATA_ERROR) {              /* deflate stream invalid */
-            gz_error(state, Z_DATA_ERROR,
-                     strm->msg == NULL ? "compressed data error" : strm->msg);
-            return -1;
-        }
-    } while (strm->avail_out && ret != Z_STREAM_END);
-
-    /* update available output */
-    state->x.have = had - strm->avail_out;
-    state->x.next = strm->next_out - state->x.have;
-
-    /* if the gzip stream completed successfully, look for another */
-    if (ret == Z_STREAM_END)
-        state->how = LOOK;
-
-    /* good decompression */
-    return 0;
-}
-
-/* Fetch data and put it in the output buffer.  Assumes state->x.have is 0.
-   Data is either copied from the input file or decompressed from the input
-   file depending on state->how.  If state->how is LOOK, then a gzip header is
-   looked for to determine whether to copy or decompress.  Returns -1 on error,
-   otherwise 0.  gz_fetch() will leave state->how as COPY or GZIP unless the
-   end of the input file has been reached and all data has been processed.  */
-local int gz_fetch(state)
-    gz_statep state;
-{
-    z_streamp strm = &(state->strm);
-
-    do {
-        switch(state->how) {
-        case LOOK:      /* -> LOOK, COPY (only if never GZIP), or GZIP */
-            if (gz_look(state) == -1)
-                return -1;
-            if (state->how == LOOK)
-                return 0;
-            break;
-        case COPY:      /* -> COPY */
-            if (gz_load(state, state->out, state->size << 1, &(state->x.have))
-                    == -1)
-                return -1;
-            state->x.next = state->out;
-            return 0;
-        case GZIP:      /* -> GZIP or LOOK (if end of gzip stream) */
-            strm->avail_out = state->size << 1;
-            strm->next_out = state->out;
-            if (gz_decomp(state) == -1)
-                return -1;
-        }
-    } while (state->x.have == 0 && (!state->eof || strm->avail_in));
-    return 0;
-}
-
-/* Skip len uncompressed bytes of output.  Return -1 on error, 0 on success. */
-local int gz_skip(state, len)
-    gz_statep state;
-    z_off64_t len;
-{
-    unsigned n;
-
-    /* skip over len bytes or reach end-of-file, whichever comes first */
-    while (len)
-        /* skip over whatever is in output buffer */
-        if (state->x.have) {
-            n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > len ?
-                (unsigned)len : state->x.have;
-            state->x.have -= n;
-            state->x.next += n;
-            state->x.pos += n;
-            len -= n;
-        }
-
-        /* output buffer empty -- return if we're at the end of the input */
-        else if (state->eof && state->strm.avail_in == 0)
-            break;
-
-        /* need more data to skip -- load up output buffer */
-        else {
-            /* get more output, looking for header if required */
-            if (gz_fetch(state) == -1)
-                return -1;
-        }
-    return 0;
-}
-
-/* Read len bytes into buf from file, or less than len up to the end of the
-   input.  Return the number of bytes read.  If zero is returned, either the
-   end of file was reached, or there was an error.  state->err must be
-   consulted in that case to determine which. */
-local z_size_t gz_read(state, buf, len)
-    gz_statep state;
-    voidp buf;
-    z_size_t len;
-{
-    z_size_t got;
-    unsigned n;
-
-    /* if len is zero, avoid unnecessary operations */
-    if (len == 0)
-        return 0;
-
-    /* process a skip request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_skip(state, state->skip) == -1)
-            return 0;
-    }
-
-    /* get len bytes to buf, or less than len if at the end */
-    got = 0;
-    do {
-        /* set n to the maximum amount of len that fits in an unsigned int */
-        n = (unsigned)-1;
-        if (n > len)
-            n = (unsigned)len;
-
-        /* first just try copying data from the output buffer */
-        if (state->x.have) {
-            if (state->x.have < n)
-                n = state->x.have;
-            memcpy(buf, state->x.next, n);
-            state->x.next += n;
-            state->x.have -= n;
-        }
-
-        /* output buffer empty -- return if we're at the end of the input */
-        else if (state->eof && state->strm.avail_in == 0) {
-            state->past = 1;        /* tried to read past end */
-            break;
-        }
-
-        /* need output data -- for small len or new stream load up our output
-           buffer */
-        else if (state->how == LOOK || n < (state->size << 1)) {
-            /* get more output, looking for header if required */
-            if (gz_fetch(state) == -1)
-                return 0;
-            continue;       /* no progress yet -- go back to copy above */
-            /* the copy above assures that we will leave with space in the
-               output buffer, allowing at least one gzungetc() to succeed */
-        }
-
-        /* large len -- read directly into user buffer */
-        else if (state->how == COPY) {      /* read directly */
-            if (gz_load(state, (unsigned char *)buf, n, &n) == -1)
-                return 0;
-        }
-
-        /* large len -- decompress directly into user buffer */
-        else {  /* state->how == GZIP */
-            state->strm.avail_out = n;
-            state->strm.next_out = (unsigned char *)buf;
-            if (gz_decomp(state) == -1)
-                return 0;
-            n = state->x.have;
-            state->x.have = 0;
-        }
-
-        /* update progress */
-        len -= n;
-        buf = (char *)buf + n;
-        got += n;
-        state->x.pos += n;
-    } while (len);
-
-    /* return number of bytes read into user buffer */
-    return got;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzread(file, buf, len)
-    gzFile file;
-    voidp buf;
-    unsigned len;
-{
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-
-    /* check that we're reading and that there's no (serious) error */
-    if (state->mode != GZ_READ ||
-            (state->err != Z_OK && state->err != Z_BUF_ERROR))
-        return -1;
-
-    /* since an int is returned, make sure len fits in one, otherwise return
-       with an error (this avoids a flaw in the interface) */
-    if ((int)len < 0) {
-        gz_error(state, Z_STREAM_ERROR, "request does not fit in an int");
-        return -1;
-    }
-
-    /* read len or fewer bytes to buf */
-    len = (unsigned)gz_read(state, buf, len);
-
-    /* check for an error */
-    if (len == 0 && state->err != Z_OK && state->err != Z_BUF_ERROR)
-        return -1;
-
-    /* return the number of bytes read (this is assured to fit in an int) */
-    return (int)len;
-}
-
-/* -- see zlib.h -- */
-z_size_t ZEXPORT gzfread(buf, size, nitems, file)
-    voidp buf;
-    z_size_t size;
-    z_size_t nitems;
-    gzFile file;
-{
-    z_size_t len;
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return 0;
-    state = (gz_statep)file;
-
-    /* check that we're reading and that there's no (serious) error */
-    if (state->mode != GZ_READ ||
-            (state->err != Z_OK && state->err != Z_BUF_ERROR))
-        return 0;
-
-    /* compute bytes to read -- error on overflow */
-    len = nitems * size;
-    if (size && len / size != nitems) {
-        gz_error(state, Z_STREAM_ERROR, "request does not fit in a size_t");
-        return 0;
-    }
-
-    /* read len or fewer bytes to buf, return the number of full items read */
-    return len ? gz_read(state, buf, len) / size : 0;
-}
-
-/* -- see zlib.h -- */
-#ifdef Z_PREFIX_SET
-#  undef z_gzgetc
-#else
-#  undef gzgetc
-#endif
-int ZEXPORT gzgetc(file)
-    gzFile file;
-{
-    unsigned char buf[1];
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-
-    /* check that we're reading and that there's no (serious) error */
-    if (state->mode != GZ_READ ||
-        (state->err != Z_OK && state->err != Z_BUF_ERROR))
-        return -1;
-
-    /* try output buffer (no need to check for skip request) */
-    if (state->x.have) {
-        state->x.have--;
-        state->x.pos++;
-        return *(state->x.next)++;
-    }
-
-    /* nothing there -- try gz_read() */
-    return gz_read(state, buf, 1) < 1 ? -1 : buf[0];
-}
-
-int ZEXPORT gzgetc_(file)
-gzFile file;
-{
-    return gzgetc(file);
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzungetc(c, file)
-    int c;
-    gzFile file;
-{
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-
-    /* check that we're reading and that there's no (serious) error */
-    if (state->mode != GZ_READ ||
-        (state->err != Z_OK && state->err != Z_BUF_ERROR))
-        return -1;
-
-    /* process a skip request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_skip(state, state->skip) == -1)
-            return -1;
-    }
-
-    /* can't push EOF */
-    if (c < 0)
-        return -1;
-
-    /* if output buffer empty, put byte at end (allows more pushing) */
-    if (state->x.have == 0) {
-        state->x.have = 1;
-        state->x.next = state->out + (state->size << 1) - 1;
-        state->x.next[0] = (unsigned char)c;
-        state->x.pos--;
-        state->past = 0;
-        return c;
-    }
-
-    /* if no room, give up (must have already done a gzungetc()) */
-    if (state->x.have == (state->size << 1)) {
-        gz_error(state, Z_DATA_ERROR, "out of room to push characters");
-        return -1;
-    }
-
-    /* slide output data if needed and insert byte before existing data */
-    if (state->x.next == state->out) {
-        unsigned char *src = state->out + state->x.have;
-        unsigned char *dest = state->out + (state->size << 1);
-        while (src > state->out)
-            *--dest = *--src;
-        state->x.next = dest;
-    }
-    state->x.have++;
-    state->x.next--;
-    state->x.next[0] = (unsigned char)c;
-    state->x.pos--;
-    state->past = 0;
-    return c;
-}
-
-/* -- see zlib.h -- */
-char * ZEXPORT gzgets(file, buf, len)
-    gzFile file;
-    char *buf;
-    int len;
-{
-    unsigned left, n;
-    char *str;
-    unsigned char *eol;
-    gz_statep state;
-
-    /* check parameters and get internal structure */
-    if (file == NULL || buf == NULL || len < 1)
-        return NULL;
-    state = (gz_statep)file;
-
-    /* check that we're reading and that there's no (serious) error */
-    if (state->mode != GZ_READ ||
-        (state->err != Z_OK && state->err != Z_BUF_ERROR))
-        return NULL;
-
-    /* process a skip request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_skip(state, state->skip) == -1)
-            return NULL;
-    }
-
-    /* copy output bytes up to new line or len - 1, whichever comes first --
-       append a terminating zero to the string (we don't check for a zero in
-       the contents, let the user worry about that) */
-    str = buf;
-    left = (unsigned)len - 1;
-    if (left) do {
-        /* assure that something is in the output buffer */
-        if (state->x.have == 0 && gz_fetch(state) == -1)
-            return NULL;                /* error */
-        if (state->x.have == 0) {       /* end of file */
-            state->past = 1;            /* read past end */
-            break;                      /* return what we have */
-        }
-
-        /* look for end-of-line in current output buffer */
-        n = state->x.have > left ? left : state->x.have;
-        eol = (unsigned char *)memchr(state->x.next, '\n', n);
-        if (eol != NULL)
-            n = (unsigned)(eol - state->x.next) + 1;
-
-        /* copy through end-of-line, or remainder if not found */
-        memcpy(buf, state->x.next, n);
-        state->x.have -= n;
-        state->x.next += n;
-        state->x.pos += n;
-        left -= n;
-        buf += n;
-    } while (left && eol == NULL);
-
-    /* return terminated string, or if nothing, end of file */
-    if (buf == str)
-        return NULL;
-    buf[0] = 0;
-    return str;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzdirect(file)
-    gzFile file;
-{
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return 0;
-    state = (gz_statep)file;
-
-    /* if the state is not known, but we can find out, then do so (this is
-       mainly for right after a gzopen() or gzdopen()) */
-    if (state->mode == GZ_READ && state->how == LOOK && state->x.have == 0)
-        (void)gz_look(state);
-
-    /* return 1 if transparent, 0 if processing a gzip stream */
-    return state->direct;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzclose_r(file)
-    gzFile file;
-{
-    int ret, err;
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return Z_STREAM_ERROR;
-    state = (gz_statep)file;
-
-    /* check that we're reading */
-    if (state->mode != GZ_READ)
-        return Z_STREAM_ERROR;
-
-    /* free memory and close file */
-    if (state->size) {
-        inflateEnd(&(state->strm));
-        free(state->out);
-        free(state->in);
-    }
-    err = state->err == Z_BUF_ERROR ? Z_BUF_ERROR : Z_OK;
-    gz_error(state, Z_OK, NULL);
-    free(state->path);
-    ret = close(state->fd);
-    free(state);
-    return ret ? Z_ERRNO : err;
-}