grpc 1.55.0 → 1.58.0

data/third_party/boringssl-with-bazel/src/include/openssl/arm_arch.h

@@ -53,12 +53,13 @@
 #ifndef OPENSSL_HEADER_ARM_ARCH_H
 #define OPENSSL_HEADER_ARM_ARCH_H
 
+#include <openssl/target.h>
+
 // arm_arch.h contains symbols used by ARM assembly, and the C code that calls
 // it. It is included as a public header to simplify the build, but is not
 // intended for external use.
 
-#if defined(__ARMEL__) || defined(_M_ARM) || defined(__AARCH64EL__) || \
-    defined(_M_ARM64)
+#if defined(OPENSSL_ARM) || defined(OPENSSL_AARCH64)
 
 // ARMV7_NEON is true when a NEON unit is present in the current CPU.
 #define ARMV7_NEON (1 << 0)
@@ -97,124 +98,8 @@
 // will be included.
 #define __ARM_MAX_ARCH__ 8
 
-// Support macros for
-//   - Armv8.3-A Pointer Authentication and
-//   - Armv8.5-A Branch Target Identification
-// features which require emitting a .note.gnu.property section with the
-// appropriate architecture-dependent feature bits set.
-//
-// |AARCH64_SIGN_LINK_REGISTER| and |AARCH64_VALIDATE_LINK_REGISTER| expand to
-// PACIxSP and AUTIxSP, respectively. |AARCH64_SIGN_LINK_REGISTER| should be
-// used immediately before saving the LR register (x30) to the stack.
-// |AARCH64_VALIDATE_LINK_REGISTER| should be used immediately after restoring
-// it. Note |AARCH64_SIGN_LINK_REGISTER|'s modifications to LR must be undone
-// with |AARCH64_VALIDATE_LINK_REGISTER| before RET. The SP register must also
-// have the same value at the two points. For example:
-//
-//   .global f
-//   f:
-//     AARCH64_SIGN_LINK_REGISTER
-//     stp x29, x30, [sp, #-96]!
-//     mov x29, sp
-//     ...
-//     ldp x29, x30, [sp], #96
-//     AARCH64_VALIDATE_LINK_REGISTER
-//     ret
-//
-// |AARCH64_VALID_CALL_TARGET| expands to BTI 'c'. Either it, or
-// |AARCH64_SIGN_LINK_REGISTER|, must be used at every point that may be an
-// indirect call target. In particular, all symbols exported from a file must
-// begin with one of these macros. For example, a leaf function that does not
-// save LR can instead use |AARCH64_VALID_CALL_TARGET|:
-//
-//   .globl return_zero
-//   return_zero:
-//     AARCH64_VALID_CALL_TARGET
-//     mov x0, #0
-//     ret
-//
-// A non-leaf function which does not immediately save LR may need both macros
-// because |AARCH64_SIGN_LINK_REGISTER| appears late. For example, the function
-// may jump to an alternate implementation before setting up the stack:
-//
-//   .globl with_early_jump
-//   with_early_jump:
-//     AARCH64_VALID_CALL_TARGET
-//     cmp x0, #128
-//     b.lt .Lwith_early_jump_128
-//     AARCH64_SIGN_LINK_REGISTER
-//     stp x29, x30, [sp, #-96]!
-//     mov x29, sp
-//     ...
-//     ldp x29, x30, [sp], #96
-//     AARCH64_VALIDATE_LINK_REGISTER
-//     ret
-//
-//  .Lwith_early_jump_128:
-//     ...
-//     ret
-//
-// These annotations are only required with indirect calls. Private symbols that
-// are only the target of direct calls do not require annotations. Also note
-// that |AARCH64_VALID_CALL_TARGET| is only valid for indirect calls (BLR), not
-// indirect jumps (BR). Indirect jumps in assembly are currently not supported
-// and would require a macro for BTI 'j'.
-//
-// Although not necessary, it is safe to use these macros in 32-bit ARM
-// assembly. This may be used to simplify dual 32-bit and 64-bit files.
-//
-// References:
-// - "ELF for the Arm® 64-bit Architecture"
-//   https://github.com/ARM-software/abi-aa/blob/master/aaelf64/aaelf64.rst
-// - "Providing protection for complex software"
-//   https://developer.arm.com/architectures/learn-the-architecture/providing-protection-for-complex-software
-
-#if defined(__ARM_FEATURE_BTI_DEFAULT) && __ARM_FEATURE_BTI_DEFAULT == 1
-#define GNU_PROPERTY_AARCH64_BTI (1 << 0)   // Has Branch Target Identification
-#define AARCH64_VALID_CALL_TARGET hint #34  // BTI 'c'
-#else
-#define GNU_PROPERTY_AARCH64_BTI 0  // No Branch Target Identification
-#define AARCH64_VALID_CALL_TARGET
-#endif
-
-#if defined(__ARM_FEATURE_PAC_DEFAULT) && \
-    (__ARM_FEATURE_PAC_DEFAULT & 1) == 1  // Signed with A-key
-#define GNU_PROPERTY_AARCH64_POINTER_AUTH \
-  (1 << 1)                                       // Has Pointer Authentication
-#define AARCH64_SIGN_LINK_REGISTER hint #25      // PACIASP
-#define AARCH64_VALIDATE_LINK_REGISTER hint #29  // AUTIASP
-#elif defined(__ARM_FEATURE_PAC_DEFAULT) && \
-    (__ARM_FEATURE_PAC_DEFAULT & 2) == 2  // Signed with B-key
-#define GNU_PROPERTY_AARCH64_POINTER_AUTH \
-  (1 << 1)                                       // Has Pointer Authentication
-#define AARCH64_SIGN_LINK_REGISTER hint #27      // PACIBSP
-#define AARCH64_VALIDATE_LINK_REGISTER hint #31  // AUTIBSP
-#else
-#define GNU_PROPERTY_AARCH64_POINTER_AUTH 0  // No Pointer Authentication
-#if GNU_PROPERTY_AARCH64_BTI != 0
-#define AARCH64_SIGN_LINK_REGISTER AARCH64_VALID_CALL_TARGET
-#else
-#define AARCH64_SIGN_LINK_REGISTER
-#endif
-#define AARCH64_VALIDATE_LINK_REGISTER
-#endif
-
-#if GNU_PROPERTY_AARCH64_POINTER_AUTH != 0 || GNU_PROPERTY_AARCH64_BTI != 0
-.pushsection .note.gnu.property, "a";
-.balign 8;
-.long 4;
-.long 0x10;
-.long 0x5;
-.asciz "GNU";
-.long 0xc0000000; /* GNU_PROPERTY_AARCH64_FEATURE_1_AND */
-.long 4;
-.long (GNU_PROPERTY_AARCH64_POINTER_AUTH | GNU_PROPERTY_AARCH64_BTI);
-.long 0;
-.popsection;
-#endif
-
 #endif  // __ASSEMBLER__
 
-#endif  // __ARMEL__ || _M_ARM || __AARCH64EL__ || _M_ARM64
+#endif  // ARM || AARCH64
 
 #endif  // OPENSSL_HEADER_ARM_ARCH_H

data/third_party/boringssl-with-bazel/src/include/openssl/asm_base.h

@@ -0,0 +1,207 @@
+/* Copyright (c) 2023, Google Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */
+
+#ifndef OPENSSL_HEADER_ASM_BASE_H
+#define OPENSSL_HEADER_ASM_BASE_H
+
+#include <openssl/target.h>
+
+
+// This header contains symbols and common sections used by assembly files. It
+// is included as a public header to simplify the build, but is not intended for
+// external use.
+//
+// Every assembly file must include this header. Some linker features require
+// all object files to be tagged with some section metadata. This header file,
+// when included in assembly, adds that metadata. It also makes defines like
+// |OPENSSL_X86_64| available and includes the prefixing macros.
+//
+// Including this header in an assembly file imples:
+//
+// - The file does not require an executable stack.
+//
+// - The file, on aarch64, uses the macros defined below to be compatible with
+//   BTI and PAC.
+//
+// - The file, on x86_64, requires the program to be compatible with Intel IBT
+//   and SHSTK
+
+#if defined(__ASSEMBLER__)
+
+#if defined(BORINGSSL_PREFIX)
+#include <boringssl_prefix_symbols_asm.h>
+#endif
+
+#if defined(__ELF__)
+// Every ELF object file, even empty ones, should disable executable stacks. See
+// https://www.airs.com/blog/archives/518.
+.pushsection .note.GNU-stack, "", %progbits
+.popsection
+#endif
+
+#if defined(__CET__) && defined(OPENSSL_X86_64)
+// Clang and GCC define __CET__ and provide <cet.h> when they support Intel's
+// Indirect Branch Tracking.
+// https://lpc.events/event/7/contributions/729/attachments/496/903/CET-LPC-2020.pdf
+//
+// cet.h defines _CET_ENDBR which is used to mark function entry points for IBT.
+// and adds the assembly marker. The value of _CET_ENDBR is made dependant on if
+// '-fcf-protection' is passed to the compiler. _CET_ENDBR is only required when
+// the function is the target of an indirect jump, but BoringSSL chooses to mark
+// all assembly entry points because it is easier, and allows BoringSSL's ABI
+// tester to call the assembly entry points via an indirect jump.
+#include <cet.h>
+#else
+#define _CET_ENDBR
+#endif
+
+#if defined(OPENSSL_ARM) || defined(OPENSSL_AARCH64)
+
+// We require the ARM assembler provide |__ARM_ARCH| from Arm C Language
+// Extensions (ACLE). This is supported in GCC 4.8+ and Clang 3.2+. MSVC does
+// not implement ACLE, but we require Clang's assembler on Windows.
+#if !defined(__ARM_ARCH)
+#error "ARM assembler must define __ARM_ARCH"
+#endif
+
+// __ARM_ARCH__ is used by OpenSSL assembly to determine the minimum target ARM
+// version.
+//
+// TODO(davidben): Switch the assembly to use |__ARM_ARCH| directly.
+#define __ARM_ARCH__ __ARM_ARCH
+
+// Even when building for 32-bit ARM, support for aarch64 crypto instructions
+// will be included.
+#define __ARM_MAX_ARCH__ 8
+
+// Support macros for
+//   - Armv8.3-A Pointer Authentication and
+//   - Armv8.5-A Branch Target Identification
+// features which require emitting a .note.gnu.property section with the
+// appropriate architecture-dependent feature bits set.
+//
+// |AARCH64_SIGN_LINK_REGISTER| and |AARCH64_VALIDATE_LINK_REGISTER| expand to
+// PACIxSP and AUTIxSP, respectively. |AARCH64_SIGN_LINK_REGISTER| should be
+// used immediately before saving the LR register (x30) to the stack.
+// |AARCH64_VALIDATE_LINK_REGISTER| should be used immediately after restoring
+// it. Note |AARCH64_SIGN_LINK_REGISTER|'s modifications to LR must be undone
+// with |AARCH64_VALIDATE_LINK_REGISTER| before RET. The SP register must also
+// have the same value at the two points. For example:
+//
+//   .global f
+//   f:
+//     AARCH64_SIGN_LINK_REGISTER
+//     stp x29, x30, [sp, #-96]!
+//     mov x29, sp
+//     ...
+//     ldp x29, x30, [sp], #96
+//     AARCH64_VALIDATE_LINK_REGISTER
+//     ret
+//
+// |AARCH64_VALID_CALL_TARGET| expands to BTI 'c'. Either it, or
+// |AARCH64_SIGN_LINK_REGISTER|, must be used at every point that may be an
+// indirect call target. In particular, all symbols exported from a file must
+// begin with one of these macros. For example, a leaf function that does not
+// save LR can instead use |AARCH64_VALID_CALL_TARGET|:
+//
+//   .globl return_zero
+//   return_zero:
+//     AARCH64_VALID_CALL_TARGET
+//     mov x0, #0
+//     ret
+//
+// A non-leaf function which does not immediately save LR may need both macros
+// because |AARCH64_SIGN_LINK_REGISTER| appears late. For example, the function
+// may jump to an alternate implementation before setting up the stack:
+//
+//   .globl with_early_jump
+//   with_early_jump:
+//     AARCH64_VALID_CALL_TARGET
+//     cmp x0, #128
+//     b.lt .Lwith_early_jump_128
+//     AARCH64_SIGN_LINK_REGISTER
+//     stp x29, x30, [sp, #-96]!
+//     mov x29, sp
+//     ...
+//     ldp x29, x30, [sp], #96
+//     AARCH64_VALIDATE_LINK_REGISTER
+//     ret
+//
+//  .Lwith_early_jump_128:
+//     ...
+//     ret
+//
+// These annotations are only required with indirect calls. Private symbols that
+// are only the target of direct calls do not require annotations. Also note
+// that |AARCH64_VALID_CALL_TARGET| is only valid for indirect calls (BLR), not
+// indirect jumps (BR). Indirect jumps in assembly are currently not supported
+// and would require a macro for BTI 'j'.
+//
+// Although not necessary, it is safe to use these macros in 32-bit ARM
+// assembly. This may be used to simplify dual 32-bit and 64-bit files.
+//
+// References:
+// - "ELF for the Arm® 64-bit Architecture"
+//   https://github.com/ARM-software/abi-aa/blob/master/aaelf64/aaelf64.rst
+// - "Providing protection for complex software"
+//   https://developer.arm.com/architectures/learn-the-architecture/providing-protection-for-complex-software
+
+#if defined(__ARM_FEATURE_BTI_DEFAULT) && __ARM_FEATURE_BTI_DEFAULT == 1
+#define GNU_PROPERTY_AARCH64_BTI (1 << 0)   // Has Branch Target Identification
+#define AARCH64_VALID_CALL_TARGET hint #34  // BTI 'c'
+#else
+#define GNU_PROPERTY_AARCH64_BTI 0  // No Branch Target Identification
+#define AARCH64_VALID_CALL_TARGET
+#endif
+
+#if defined(__ARM_FEATURE_PAC_DEFAULT) && \
+    (__ARM_FEATURE_PAC_DEFAULT & 1) == 1  // Signed with A-key
+#define GNU_PROPERTY_AARCH64_POINTER_AUTH \
+  (1 << 1)                                       // Has Pointer Authentication
+#define AARCH64_SIGN_LINK_REGISTER hint #25      // PACIASP
+#define AARCH64_VALIDATE_LINK_REGISTER hint #29  // AUTIASP
+#elif defined(__ARM_FEATURE_PAC_DEFAULT) && \
+    (__ARM_FEATURE_PAC_DEFAULT & 2) == 2  // Signed with B-key
+#define GNU_PROPERTY_AARCH64_POINTER_AUTH \
+  (1 << 1)                                       // Has Pointer Authentication
+#define AARCH64_SIGN_LINK_REGISTER hint #27      // PACIBSP
+#define AARCH64_VALIDATE_LINK_REGISTER hint #31  // AUTIBSP
+#else
+#define GNU_PROPERTY_AARCH64_POINTER_AUTH 0  // No Pointer Authentication
+#if GNU_PROPERTY_AARCH64_BTI != 0
+#define AARCH64_SIGN_LINK_REGISTER AARCH64_VALID_CALL_TARGET
+#else
+#define AARCH64_SIGN_LINK_REGISTER
+#endif
+#define AARCH64_VALIDATE_LINK_REGISTER
+#endif
+
+#if GNU_PROPERTY_AARCH64_POINTER_AUTH != 0 || GNU_PROPERTY_AARCH64_BTI != 0
+.pushsection .note.gnu.property, "a";
+.balign 8;
+.long 4;
+.long 0x10;
+.long 0x5;
+.asciz "GNU";
+.long 0xc0000000; /* GNU_PROPERTY_AARCH64_FEATURE_1_AND */
+.long 4;
+.long (GNU_PROPERTY_AARCH64_POINTER_AUTH | GNU_PROPERTY_AARCH64_BTI);
+.long 0;
+.popsection;
+#endif
+#endif  // ARM || AARCH64
+
+#endif  // __ASSEMBLER__
+
+#endif  // OPENSSL_HEADER_ASM_BASE_H

data/third_party/boringssl-with-bazel/src/include/openssl/asn1.h

@@ -740,15 +740,17 @@ OPENSSL_EXPORT int ASN1_STRING_to_UTF8(unsigned char **out,
 // the result. If |out| is NULL, it returns the selected output type without
 // constructing an |ASN1_STRING|. On error, this function returns -1.
 OPENSSL_EXPORT int ASN1_mbstring_copy(ASN1_STRING **out, const uint8_t *in,
-                                      int len, int inform, unsigned long mask);
+                                      ossl_ssize_t len, int inform,
+                                      unsigned long mask);
 
 // ASN1_mbstring_ncopy behaves like |ASN1_mbstring_copy| but returns an error if
 // the input is less than |minsize| or greater than |maxsize| codepoints long. A
 // |maxsize| value of zero is ignored. Note the sizes are measured in
 // codepoints, not output bytes.
 OPENSSL_EXPORT int ASN1_mbstring_ncopy(ASN1_STRING **out, const uint8_t *in,
-                                       int len, int inform, unsigned long mask,
-                                       long minsize, long maxsize);
+                                       ossl_ssize_t len, int inform,
+                                       unsigned long mask, ossl_ssize_t minsize,
+                                       ossl_ssize_t maxsize);
 
 // ASN1_STRING_set_by_NID behaves like |ASN1_mbstring_ncopy|, but determines
 // |mask|, |minsize|, and |maxsize| based on |nid|. When |nid| is a recognized
@@ -774,7 +776,7 @@ OPENSSL_EXPORT int ASN1_mbstring_ncopy(ASN1_STRING **out, const uint8_t *in,
 // to call |ASN1_mbstring_ncopy| directly instead.
 OPENSSL_EXPORT ASN1_STRING *ASN1_STRING_set_by_NID(ASN1_STRING **out,
                                                    const unsigned char *in,
-                                                   int len, int inform,
+                                                   ossl_ssize_t len, int inform,
                                                    int nid);
 
 // STABLE_NO_MASK causes |ASN1_STRING_TABLE_add| to allow types other than
@@ -1353,6 +1355,11 @@ OPENSSL_EXPORT ASN1_GENERALIZEDTIME *ASN1_TIME_to_generalizedtime(
 // GeneralizedTime. If |str| is neither, it returns zero.
 OPENSSL_EXPORT int ASN1_TIME_set_string(ASN1_TIME *s, const char *str);
 
+// ASN1_TIME_set_string_X509 behaves like |ASN1_TIME_set_string| except it
+// additionally converts GeneralizedTime to UTCTime if it is in the range where
+// UTCTime is used. See RFC 5280, section 4.1.2.5.
+OPENSSL_EXPORT int ASN1_TIME_set_string_X509(ASN1_TIME *s, const char *str);
+
 // ASN1_TIME_to_time_t converts |t| to a time_t value in |out|. On
 // success, one is returned. On failure zero is returned. This function
 // will fail if the time can not be represented in a time_t.

data/third_party/boringssl-with-bazel/src/include/openssl/base.h

@@ -58,6 +58,7 @@
 
 #include <stddef.h>
 #include <stdint.h>
+#include <stdlib.h>
 #include <sys/types.h>
 
 #if defined(__MINGW32__)
@@ -74,6 +75,7 @@
 // opensslconf.h.
 #include <openssl/is_boringssl.h>
 #include <openssl/opensslconf.h>
+#include <openssl/target.h>  // IWYU pragma: export
 
 #if defined(BORINGSSL_PREFIX)
 #include <boringssl_prefix_symbols.h>
@@ -84,48 +86,7 @@ extern "C" {
 #endif
 
 
-#if defined(__x86_64) || defined(_M_AMD64) || defined(_M_X64)
-#define OPENSSL_64_BIT
-#define OPENSSL_X86_64
-#elif defined(__x86) || defined(__i386) || defined(__i386__) || defined(_M_IX86)
-#define OPENSSL_32_BIT
-#define OPENSSL_X86
-#elif defined(__AARCH64EL__) || defined(_M_ARM64)
-#define OPENSSL_64_BIT
-#define OPENSSL_AARCH64
-#elif defined(__ARMEL__) || defined(_M_ARM)
-#define OPENSSL_32_BIT
-#define OPENSSL_ARM
-#elif defined(__MIPSEL__) && !defined(__LP64__)
-#define OPENSSL_32_BIT
-#define OPENSSL_MIPS
-#elif defined(__MIPSEL__) && defined(__LP64__)
-#define OPENSSL_64_BIT
-#define OPENSSL_MIPS64
-#elif defined(__riscv) && __SIZEOF_POINTER__ == 8
-#define OPENSSL_64_BIT
-#define OPENSSL_RISCV64
-#elif defined(__riscv) && __SIZEOF_POINTER__ == 4
-#define OPENSSL_32_BIT
-#elif defined(__pnacl__)
-#define OPENSSL_32_BIT
-#define OPENSSL_PNACL
-#elif defined(__wasm__)
-#define OPENSSL_32_BIT
-#elif defined(__asmjs__)
-#define OPENSSL_32_BIT
-#elif defined(__myriad2__)
-#define OPENSSL_32_BIT
-#else
-// Note BoringSSL only supports standard 32-bit and 64-bit two's-complement,
-// little-endian architectures. Functions will not produce the correct answer
-// on other systems. Run the crypto_test binary, notably
-// crypto/compiler_test.cc, before adding a new architecture.
-#error "Unknown target CPU"
-#endif
-
 #if defined(__APPLE__)
-#define OPENSSL_APPLE
 // Note |TARGET_OS_MAC| is set for all Apple OS variants. |TARGET_OS_OSX|
 // targets macOS specifically.
 #if defined(TARGET_OS_OSX) && TARGET_OS_OSX
@@ -136,51 +97,6 @@ extern "C" {
 #endif
 #endif
 
-#if defined(_WIN32)
-#define OPENSSL_WINDOWS
-#endif
-
-// Trusty isn't Linux but currently defines __linux__. As a workaround, we
-// exclude it here.
-// TODO(b/169780122): Remove this workaround once Trusty no longer defines it.
-#if defined(__linux__) && !defined(__TRUSTY__)
-#define OPENSSL_LINUX
-#endif
-
-#if defined(__Fuchsia__)
-#define OPENSSL_FUCHSIA
-#endif
-
-#if defined(__TRUSTY__)
-#define OPENSSL_TRUSTY
-#define OPENSSL_NO_THREADS_CORRUPT_MEMORY_AND_LEAK_SECRETS_IF_THREADED
-#endif
-
-#if defined(__ANDROID_API__)
-#define OPENSSL_ANDROID
-#endif
-
-#if defined(__FreeBSD__)
-#define OPENSSL_FREEBSD
-#endif
-
-// BoringSSL requires platform's locking APIs to make internal global state
-// thread-safe, including the PRNG. On some single-threaded embedded platforms,
-// locking APIs may not exist, so this dependency may be disabled with the
-// following build flag.
-//
-// IMPORTANT: Doing so means the consumer promises the library will never be
-// used in any multi-threaded context. It causes BoringSSL to be globally
-// thread-unsafe. Setting it inappropriately will subtly and unpredictably
-// corrupt memory and leak secret keys.
-//
-// Do not set this flag on any platform where threads are possible. BoringSSL
-// maintainers will not provide support for any consumers that do so. Changes
-// which break such unsupported configurations will not be reverted.
-#if !defined(OPENSSL_NO_THREADS_CORRUPT_MEMORY_AND_LEAK_SECRETS_IF_THREADED)
-#define OPENSSL_THREADS
-#endif
-
 #define OPENSSL_IS_BORINGSSL
 #define OPENSSL_VERSION_NUMBER 0x1010107f
 #define SSLEAY_VERSION_NUMBER OPENSSL_VERSION_NUMBER
@@ -193,7 +109,7 @@ extern "C" {
 // A consumer may use this symbol in the preprocessor to temporarily build
 // against multiple revisions of BoringSSL at the same time. It is not
 // recommended to do so for longer than is necessary.
-#define BORINGSSL_API_VERSION 19
+#define BORINGSSL_API_VERSION 26
 
 #if defined(BORINGSSL_SHARED_LIBRARY)
 
@@ -221,6 +137,33 @@ extern "C" {
 
 #endif  // defined(BORINGSSL_SHARED_LIBRARY)
 
+#if defined(_MSC_VER)
+
+// OPENSSL_DEPRECATED is used to mark a function as deprecated. Use
+// of any functions so marked in caller code will produce a warning.
+// OPENSSL_BEGIN_ALLOW_DEPRECATED and OPENSSL_END_ALLOW_DEPRECATED
+// can be used to suppress the warning in regions of caller code.
+#define OPENSSL_DEPRECATED __declspec(deprecated)
+#define OPENSSL_BEGIN_ALLOW_DEPRECATED \
+  __pragma(warning(push)) __pragma(warning(disable : 4996))
+#define OPENSSL_END_ALLOW_DEPRECATED __pragma(warning(pop))
+
+#elif defined(__GNUC__) || defined(__clang__)
+
+#define OPENSSL_DEPRECATED __attribute__((__deprecated__))
+#define OPENSSL_BEGIN_ALLOW_DEPRECATED \
+  _Pragma("GCC diagnostic push")       \
+      _Pragma("GCC diagnostic ignored \"-Wdeprecated-declarations\"")
+#define OPENSSL_END_ALLOW_DEPRECATED _Pragma("GCC diagnostic pop")
+
+#else
+
+#define OPENSSL_DEPRECATED
+#define OPENSSL_BEGIN_ALLOW_DEPRECATED
+#define OPENSSL_END_ALLOW_DEPRECATED
+
+#endif
+
 
 #if defined(__GNUC__) || defined(__clang__)
 // MinGW has two different printf implementations. Ensure the format macro
@@ -280,31 +223,6 @@ extern "C" {
 #define OPENSSL_INLINE static inline OPENSSL_UNUSED
 #endif
 
-#if defined(BORINGSSL_UNSAFE_FUZZER_MODE) && \
-    !defined(BORINGSSL_UNSAFE_DETERMINISTIC_MODE)
-#define BORINGSSL_UNSAFE_DETERMINISTIC_MODE
-#endif
-
-#if defined(__has_feature)
-#if __has_feature(address_sanitizer)
-#define OPENSSL_ASAN
-#endif
-#if __has_feature(thread_sanitizer)
-#define OPENSSL_TSAN
-#endif
-#if __has_feature(memory_sanitizer)
-#define OPENSSL_MSAN
-#define OPENSSL_ASM_INCOMPATIBLE
-#endif
-#endif
-
-#if defined(OPENSSL_ASM_INCOMPATIBLE)
-#undef OPENSSL_ASM_INCOMPATIBLE
-#if !defined(OPENSSL_NO_ASM)
-#define OPENSSL_NO_ASM
-#endif
-#endif  // OPENSSL_ASM_INCOMPATIBLE
-
 #if defined(__cplusplus)
 // enums can be predeclared, but only in C++ and only if given an explicit type.
 // C doesn't support setting an explicit type for enums thus a #define is used
@@ -466,6 +384,13 @@ typedef struct x509_trust_st X509_TRUST;
 
 typedef void *OPENSSL_BLOCK;
 
+// BSSL_CHECK aborts if |condition| is not true.
+#define BSSL_CHECK(condition) \
+  do {                        \
+    if (!(condition)) {       \
+      abort();                \
+    }                         \
+  } while (0);
 
 #if defined(__cplusplus)
 }  // extern C

data/third_party/boringssl-with-bazel/src/include/openssl/bio.h

@@ -431,12 +431,14 @@ OPENSSL_EXPORT int BIO_set_mem_eof_return(BIO *bio, int eof_value);
 // |BIO_reset| attempts to seek the file pointer to the start of file using
 // |lseek|.
 
+#if !defined(OPENSSL_NO_POSIX_IO)
 // BIO_s_fd returns a |BIO_METHOD| for file descriptor fds.
 OPENSSL_EXPORT const BIO_METHOD *BIO_s_fd(void);
 
 // BIO_new_fd creates a new file descriptor BIO wrapping |fd|. If |close_flag|
 // is non-zero, then |fd| will be closed when the BIO is.
 OPENSSL_EXPORT BIO *BIO_new_fd(int fd, int close_flag);
+#endif
 
 // BIO_set_fd sets the file descriptor of |bio| to |fd|. If |close_flag| is
 // non-zero then |fd| will be closed when |bio| is. It returns one on success
@@ -540,12 +542,14 @@ OPENSSL_EXPORT long BIO_seek(BIO *bio, long offset);
 // TODO(davidben): Add separate APIs and fix the internals to use |SOCKET|s
 // around rather than rely on int casts.
 
+#if !defined(OPENSSL_NO_SOCK)
 OPENSSL_EXPORT const BIO_METHOD *BIO_s_socket(void);
 
 // BIO_new_socket allocates and initialises a fresh BIO which will read and
 // write to the socket |fd|. If |close_flag| is |BIO_CLOSE| then closing the
 // BIO will close |fd|. It returns the fresh |BIO| or NULL on error.
 OPENSSL_EXPORT BIO *BIO_new_socket(int fd, int close_flag);
+#endif  // !OPENSSL_NO_SOCK
 
 
 // Connect BIOs.
@@ -553,6 +557,7 @@ OPENSSL_EXPORT BIO *BIO_new_socket(int fd, int close_flag);
 // A connection BIO creates a network connection and transfers data over the
 // resulting socket.
 
+#if !defined(OPENSSL_NO_SOCK)
 OPENSSL_EXPORT const BIO_METHOD *BIO_s_connect(void);
 
 // BIO_new_connect returns a BIO that connects to the given hostname and port.
@@ -580,12 +585,17 @@ OPENSSL_EXPORT int BIO_set_conn_port(BIO *bio, const char *port_str);
 OPENSSL_EXPORT int BIO_set_conn_int_port(BIO *bio, const int *port);
 
 // BIO_set_nbio sets whether |bio| will use non-blocking I/O operations. It
-// returns one on success and zero otherwise.
+// returns one on success and zero otherwise. This only works for connect BIOs
+// and must be called before |bio| is connected to take effect.
+//
+// For socket and fd BIOs, callers must configure blocking vs. non-blocking I/O
+// using the underlying platform APIs.
 OPENSSL_EXPORT int BIO_set_nbio(BIO *bio, int on);
 
 // BIO_do_connect connects |bio| if it has not been connected yet. It returns
 // one on success and <= 0 otherwise.
 OPENSSL_EXPORT int BIO_do_connect(BIO *bio);
+#endif  // !OPENSSL_NO_SOCK
 
 
 // Datagram BIOs.
@@ -873,7 +883,6 @@ struct bio_st {
 #define BIO_C_GET_FILE_PTR 107
 #define BIO_C_SET_FILENAME 108
 #define BIO_C_SET_SSL 109
-#define BIO_C_GET_SSL 110
 #define BIO_C_SET_MD 111
 #define BIO_C_GET_MD 112
 #define BIO_C_GET_CIPHER_STATUS 113
@@ -887,9 +896,6 @@ struct bio_st {
 #define BIO_C_GET_PROXY_PARAM 121
 #define BIO_C_SET_BUFF_READ_DATA 122  // data to read first
 #define BIO_C_GET_ACCEPT 124
-#define BIO_C_SET_SSL_RENEGOTIATE_BYTES 125
-#define BIO_C_GET_SSL_NUM_RENEGOTIATES 126
-#define BIO_C_SET_SSL_RENEGOTIATE_TIMEOUT 127
 #define BIO_C_FILE_SEEK 128
 #define BIO_C_GET_CIPHER_CTX 129
 #define BIO_C_SET_BUF_MEM_EOF_RETURN 130  // return end of input value

data/third_party/boringssl-with-bazel/src/include/openssl/blake2.h

@@ -28,10 +28,7 @@ extern "C" {
 struct blake2b_state_st {
   uint64_t h[8];
   uint64_t t_low, t_high;
-  union {
-    uint8_t bytes[BLAKE2B_CBLOCK];
-    uint64_t words[16];
-  } block;
+  uint8_t block[BLAKE2B_CBLOCK];
   size_t block_used;
 };