grpc 1.47.0-x86_64-linux → 1.49.0.pre1-x86_64-linux

data/third_party/abseil-cpp/absl/random/internal/wide_multiply.h

@@ -34,43 +34,6 @@ namespace absl {
 ABSL_NAMESPACE_BEGIN
 namespace random_internal {
 
-// Helper object to multiply two 64-bit values to a 128-bit value.
-// MultiplyU64ToU128 multiplies two 64-bit values to a 128-bit value.
-// If an intrinsic is available, it is used, otherwise use native 32-bit
-// multiplies to construct the result.
-inline absl::uint128 MultiplyU64ToU128(uint64_t a, uint64_t b) {
-#if defined(ABSL_HAVE_INTRINSIC_INT128)
-  return absl::uint128(static_cast<__uint128_t>(a) * b);
-#elif defined(ABSL_INTERNAL_USE_UMUL128)
-  // uint64_t * uint64_t => uint128 multiply using imul intrinsic on MSVC.
-  uint64_t high = 0;
-  const uint64_t low = _umul128(a, b, &high);
-  return absl::MakeUint128(high, low);
-#else
-  // uint128(a) * uint128(b) in emulated mode computes a full 128-bit x 128-bit
-  // multiply.  However there are many cases where that is not necessary, and it
-  // is only necessary to support a 64-bit x 64-bit = 128-bit multiply.  This is
-  // for those cases.
-  const uint64_t a00 = static_cast<uint32_t>(a);
-  const uint64_t a32 = a >> 32;
-  const uint64_t b00 = static_cast<uint32_t>(b);
-  const uint64_t b32 = b >> 32;
-
-  const uint64_t c00 = a00 * b00;
-  const uint64_t c32a = a00 * b32;
-  const uint64_t c32b = a32 * b00;
-  const uint64_t c64 = a32 * b32;
-
-  const uint32_t carry =
-      static_cast<uint32_t>(((c00 >> 32) + static_cast<uint32_t>(c32a) +
-                             static_cast<uint32_t>(c32b)) >>
-                            32);
-
-  return absl::MakeUint128(c64 + (c32a >> 32) + (c32b >> 32) + carry,
-                           c00 + (c32a << 32) + (c32b << 32));
-#endif
-}
-
 // wide_multiply<T> multiplies two N-bit values to a 2N-bit result.
 template <typename UIntType>
 struct wide_multiply {
@@ -82,27 +45,49 @@ struct wide_multiply {
     return static_cast<result_type>(a) * b;
   }
 
-  static input_type hi(result_type r) { return r >> kN; }
-  static input_type lo(result_type r) { return r; }
+  static input_type hi(result_type r) {
+    return static_cast<input_type>(r >> kN);
+  }
+  static input_type lo(result_type r) { return static_cast<input_type>(r); }
 
   static_assert(std::is_unsigned<UIntType>::value,
                 "Class-template wide_multiply<> argument must be unsigned.");
 };
 
-#ifndef ABSL_HAVE_INTRINSIC_INT128
+// MultiplyU128ToU256 multiplies two 128-bit values to a 256-bit value.
+inline U256 MultiplyU128ToU256(uint128 a, uint128 b) {
+  const uint128 a00 = static_cast<uint64_t>(a);
+  const uint128 a64 = a >> 64;
+  const uint128 b00 = static_cast<uint64_t>(b);
+  const uint128 b64 = b >> 64;
+
+  const uint128 c00 = a00 * b00;
+  const uint128 c64a = a00 * b64;
+  const uint128 c64b = a64 * b00;
+  const uint128 c128 = a64 * b64;
+
+  const uint64_t carry =
+      static_cast<uint64_t>(((c00 >> 64) + static_cast<uint64_t>(c64a) +
+                             static_cast<uint64_t>(c64b)) >>
+                            64);
+
+  return {c128 + (c64a >> 64) + (c64b >> 64) + carry,
+          c00 + (c64a << 64) + (c64b << 64)};
+}
+
+
 template <>
-struct wide_multiply<uint64_t> {
-  using input_type = uint64_t;
-  using result_type = absl::uint128;
+struct wide_multiply<uint128> {
+  using input_type = uint128;
+  using result_type = U256;
 
-  static result_type multiply(uint64_t a, uint64_t b) {
-    return MultiplyU64ToU128(a, b);
+  static result_type multiply(input_type a, input_type b) {
+    return MultiplyU128ToU256(a, b);
   }
 
-  static uint64_t hi(result_type r) { return absl::Uint128High64(r); }
-  static uint64_t lo(result_type r) { return absl::Uint128Low64(r); }
+  static input_type hi(result_type r) { return r.hi; }
+  static input_type lo(result_type r) { return r.lo; }
 };
-#endif
 
 }  // namespace random_internal
 ABSL_NAMESPACE_END

data/third_party/abseil-cpp/absl/random/log_uniform_int_distribution.h

@@ -69,10 +69,8 @@ class log_uniform_int_distribution {
       if (base_ == 2) {
         // Determine where the first set bit is on range(), giving a log2(range)
         // value which can be used to construct bounds.
-        log_range_ =
-            (std::min)(bit_width(range()),
-                       static_cast<unsigned_type>(
-                           std::numeric_limits<unsigned_type>::digits));
+        log_range_ = (std::min)(random_internal::BitWidth(range()),
+                                std::numeric_limits<unsigned_type>::digits);
       } else {
         // NOTE: Computing the logN(x) introduces error from 2 sources:
         // 1. Conversion of int to double loses precision for values >=
@@ -83,7 +81,7 @@ class log_uniform_int_distribution {
         //
         // Thus a result which should equal K may equal K +/- epsilon,
         // which can eliminate some values depending on where the bounds fall.
-        const double inv_log_base = 1.0 / std::log(base_);
+        const double inv_log_base = 1.0 / std::log(static_cast<double>(base_));
         const double log_range = std::log(static_cast<double>(range()) + 0.5);
         log_range_ = static_cast<int>(std::ceil(inv_log_base * log_range));
       }
@@ -113,7 +111,7 @@ class log_uniform_int_distribution {
     unsigned_type range_;  // max - min
     int log_range_;        // ceil(logN(range_))
 
-    static_assert(std::is_integral<IntType>::value,
+    static_assert(random_internal::IsIntegral<IntType>::value,
                   "Class-template absl::log_uniform_int_distribution<> must be "
                   "parameterized using an integral type.");
   };
@@ -139,7 +137,7 @@ class log_uniform_int_distribution {
   template <typename URBG>
   result_type operator()(URBG& g,  // NOLINT(runtime/references)
                          const param_type& p) {
-    return (p.min)() + Generate(g, p);
+    return static_cast<result_type>((p.min)() + Generate(g, p));
   }
 
   result_type(min)() const { return (param_.min)(); }
@@ -193,8 +191,8 @@ log_uniform_int_distribution<IntType>::Generate(
                 ? (std::numeric_limits<unsigned_type>::max)()
                 : (static_cast<unsigned_type>(1) << e) - 1;
   } else {
-    const double r = std::pow(p.base(), d);
-    const double s = (r * p.base()) - 1.0;
+    const double r = std::pow(static_cast<double>(p.base()), d);
+    const double s = (r * static_cast<double>(p.base())) - 1.0;
 
     base_e =
         (r > static_cast<double>((std::numeric_limits<unsigned_type>::max)()))
@@ -211,7 +209,8 @@ log_uniform_int_distribution<IntType>::Generate(
   const unsigned_type hi = (top_e >= p.range()) ? p.range() : top_e;
 
   // choose uniformly over [lo, hi]
-  return absl::uniform_int_distribution<result_type>(lo, hi)(g);
+  return absl::uniform_int_distribution<result_type>(
+      static_cast<result_type>(lo), static_cast<result_type>(hi))(g);
 }
 
 template <typename CharT, typename Traits, typename IntType>

data/third_party/abseil-cpp/absl/random/poisson_distribution.h

@@ -26,6 +26,7 @@
 #include "absl/random/internal/fastmath.h"
 #include "absl/random/internal/generate_real.h"
 #include "absl/random/internal/iostream_state_saver.h"
+#include "absl/random/internal/traits.h"
 
 namespace absl {
 ABSL_NAMESPACE_BEGIN
@@ -80,7 +81,7 @@ class poisson_distribution {
     double log_k_;
     int split_;
 
-    static_assert(std::is_integral<IntType>::value,
+    static_assert(random_internal::IsIntegral<IntType>::value,
                   "Class-template absl::poisson_distribution<> must be "
                   "parameterized using an integral type.");
   };
@@ -133,7 +134,8 @@ template <typename IntType>
 poisson_distribution<IntType>::param_type::param_type(double mean)
     : mean_(mean), split_(0) {
   assert(mean >= 0);
-  assert(mean <= (std::numeric_limits<result_type>::max)());
+  assert(mean <=
+         static_cast<double>((std::numeric_limits<result_type>::max)()));
   // As a defensive measure, avoid large values of the mean.  The rejection
   // algorithm used does not support very large values well.  It my be worth
   // changing algorithms to better deal with these cases.
@@ -222,8 +224,9 @@ poisson_distribution<IntType>::operator()(
     // clang-format on
     const double lhs = 2.0 * std::log(u) + p.log_k_ + s;
     if (lhs < rhs) {
-      return x > (max)() ? (max)()
-                         : static_cast<result_type>(x);  // f(x)/k >= u^2
+      return x > static_cast<double>((max)())
+                 ? (max)()
+                 : static_cast<result_type>(x);  // f(x)/k >= u^2
     }
   }
 }

data/third_party/abseil-cpp/absl/random/seed_sequences.h

@@ -28,6 +28,7 @@
 #include <iterator>
 #include <random>
 
+#include "absl/base/config.h"
 #include "absl/random/internal/salted_seed_seq.h"
 #include "absl/random/internal/seed_material.h"
 #include "absl/random/seed_gen_exception.h"

data/third_party/abseil-cpp/absl/random/uniform_int_distribution.h

@@ -97,7 +97,7 @@ class uniform_int_distribution {
     result_type lo_;
     unsigned_type range_;
 
-    static_assert(std::is_integral<result_type>::value,
+    static_assert(random_internal::IsIntegral<result_type>::value,
                   "Class-template absl::uniform_int_distribution<> must be "
                   "parameterized using an integral type.");
   };  // param_type
@@ -125,7 +125,7 @@ class uniform_int_distribution {
   template <typename URBG>
   result_type operator()(
       URBG& gen, const param_type& param) {  // NOLINT(runtime/references)
-    return param.a() + Generate(gen, param.range());
+    return static_cast<result_type>(param.a() + Generate(gen, param.range()));
   }
 
   result_type a() const { return param_.a(); }

data/third_party/abseil-cpp/absl/random/uniform_real_distribution.h

@@ -73,12 +73,12 @@ class uniform_real_distribution {
         : lo_(lo), hi_(hi), range_(hi - lo) {
       // [rand.dist.uni.real] preconditions 2 & 3
       assert(lo <= hi);
+
       // NOTE: For integral types, we can promote the range to an unsigned type,
       // which gives full width of the range. However for real (fp) types, this
       // is not possible, so value generation cannot use the full range of the
       // real type.
       assert(range_ <= (std::numeric_limits<result_type>::max)());
-      assert(std::isfinite(range_));
     }
 
     result_type a() const { return lo_; }

data/third_party/abseil-cpp/absl/random/zipf_distribution.h

@@ -23,13 +23,14 @@
 #include <type_traits>
 
 #include "absl/random/internal/iostream_state_saver.h"
+#include "absl/random/internal/traits.h"
 #include "absl/random/uniform_real_distribution.h"
 
 namespace absl {
 ABSL_NAMESPACE_BEGIN
 
 // absl::zipf_distribution produces random integer-values in the range [0, k],
-// distributed according to the discrete probability function:
+// distributed according to the unnormalized discrete probability function:
 //
 //  P(x) = (v + x) ^ -q
 //
@@ -94,7 +95,7 @@ class zipf_distribution {
     double hxm_;              // h(k + 0.5)
     double hx0_minus_hxm_;    // h(x0) - h(k + 0.5)
 
-    static_assert(std::is_integral<IntType>::value,
+    static_assert(random_internal::IsIntegral<IntType>::value,
                   "Class-template absl::zipf_distribution<> must be "
                   "parameterized using an integral type.");
   };
@@ -221,7 +222,7 @@ zipf_distribution<IntType>::operator()(
     const double u = p.hxm_ + v * p.hx0_minus_hxm_;
     const double x = p.hinv(u);
     k = rint(x);              // std::floor(x + 0.5);
-    if (k > p.k()) continue;  // reject k > max_k
+    if (k > static_cast<double>(p.k())) continue;  // reject k > max_k
     if (k - x <= p.s_) break;
     const double h = p.h(k + 0.5);
     const double r = p.pow_negative_q(p.v_ + k);

data/third_party/abseil-cpp/absl/status/internal/status_internal.h

@@ -15,7 +15,9 @@
 #define ABSL_STATUS_INTERNAL_STATUS_INTERNAL_H_
 
 #include <string>
+#include <utility>
 
+#include "absl/base/attributes.h"
 #include "absl/container/inlined_vector.h"
 #include "absl/strings/cord.h"
 
@@ -25,7 +27,14 @@ namespace absl {
 ABSL_NAMESPACE_BEGIN
 // Returned Status objects may not be ignored. Codesearch doesn't handle ifdefs
 // as part of a class definitions (b/6995610), so we use a forward declaration.
+//
+// TODO(b/176172494): ABSL_MUST_USE_RESULT should expand to the more strict
+// [[nodiscard]]. For now, just use [[nodiscard]] directly when it is available.
+#if ABSL_HAVE_CPP_ATTRIBUTE(nodiscard)
+class [[nodiscard]] Status;
+#else
 class ABSL_MUST_USE_RESULT Status;
+#endif
 ABSL_NAMESPACE_END
 }  // namespace absl
 #endif  // !SWIG
@@ -61,6 +70,14 @@ struct StatusRep {
 };
 
 absl::StatusCode MapToLocalCode(int value);
+
+// Returns a pointer to a newly-allocated string with the given `prefix`,
+// suitable for output as an error message in assertion/`CHECK()` failures.
+//
+// This is an internal implementation detail for Abseil logging.
+std::string* MakeCheckFailString(const absl::Status* status,
+                                 const char* prefix);
+
 }  // namespace status_internal
 
 ABSL_NAMESPACE_END

data/third_party/abseil-cpp/absl/status/status.cc

@@ -13,9 +13,12 @@
 // limitations under the License.
 #include "absl/status/status.h"
 
+#include <errno.h>
+
 #include <cassert>
 
 #include "absl/base/internal/raw_logging.h"
+#include "absl/base/internal/strerror.h"
 #include "absl/debugging/stacktrace.h"
 #include "absl/debugging/symbolize.h"
 #include "absl/status/status_payload_printer.h"
@@ -185,11 +188,16 @@ void Status::ForEachPayload(
 }
 
 const std::string* Status::EmptyString() {
-  static std::string* empty_string = new std::string();
-  return empty_string;
+  static union EmptyString {
+    std::string str;
+    ~EmptyString() {}
+  } empty = {{}};
+  return &empty.str;
 }
 
+#ifdef ABSL_INTERNAL_NEED_REDUNDANT_CONSTEXPR_DECL
 constexpr const char Status::kMovedFromString[];
+#endif
 
 const std::string* Status::MovedFromString() {
   static std::string* moved_from_string = new std::string(kMovedFromString);
@@ -440,5 +448,169 @@ bool IsUnknown(const Status& status) {
   return status.code() == absl::StatusCode::kUnknown;
 }
 
+StatusCode ErrnoToStatusCode(int error_number) {
+  switch (error_number) {
+    case 0:
+      return StatusCode::kOk;
+    case EINVAL:        // Invalid argument
+    case ENAMETOOLONG:  // Filename too long
+    case E2BIG:         // Argument list too long
+    case EDESTADDRREQ:  // Destination address required
+    case EDOM:          // Mathematics argument out of domain of function
+    case EFAULT:        // Bad address
+    case EILSEQ:        // Illegal byte sequence
+    case ENOPROTOOPT:   // Protocol not available
+    case ENOSTR:        // Not a STREAM
+    case ENOTSOCK:      // Not a socket
+    case ENOTTY:        // Inappropriate I/O control operation
+    case EPROTOTYPE:    // Protocol wrong type for socket
+    case ESPIPE:        // Invalid seek
+      return StatusCode::kInvalidArgument;
+    case ETIMEDOUT:  // Connection timed out
+    case ETIME:      // Timer expired
+      return StatusCode::kDeadlineExceeded;
+    case ENODEV:  // No such device
+    case ENOENT:  // No such file or directory
+#ifdef ENOMEDIUM
+    case ENOMEDIUM:  // No medium found
+#endif
+    case ENXIO:  // No such device or address
+    case ESRCH:  // No such process
+      return StatusCode::kNotFound;
+    case EEXIST:         // File exists
+    case EADDRNOTAVAIL:  // Address not available
+    case EALREADY:       // Connection already in progress
+#ifdef ENOTUNIQ
+    case ENOTUNIQ:  // Name not unique on network
+#endif
+      return StatusCode::kAlreadyExists;
+    case EPERM:   // Operation not permitted
+    case EACCES:  // Permission denied
+#ifdef ENOKEY
+    case ENOKEY:  // Required key not available
+#endif
+    case EROFS:  // Read only file system
+      return StatusCode::kPermissionDenied;
+    case ENOTEMPTY:   // Directory not empty
+    case EISDIR:      // Is a directory
+    case ENOTDIR:     // Not a directory
+    case EADDRINUSE:  // Address already in use
+    case EBADF:       // Invalid file descriptor
+#ifdef EBADFD
+    case EBADFD:  // File descriptor in bad state
+#endif
+    case EBUSY:    // Device or resource busy
+    case ECHILD:   // No child processes
+    case EISCONN:  // Socket is connected
+#ifdef EISNAM
+    case EISNAM:  // Is a named type file
+#endif
+#ifdef ENOTBLK
+    case ENOTBLK:  // Block device required
+#endif
+    case ENOTCONN:  // The socket is not connected
+    case EPIPE:     // Broken pipe
+#ifdef ESHUTDOWN
+    case ESHUTDOWN:  // Cannot send after transport endpoint shutdown
+#endif
+    case ETXTBSY:  // Text file busy
+#ifdef EUNATCH
+    case EUNATCH:  // Protocol driver not attached
+#endif
+      return StatusCode::kFailedPrecondition;
+    case ENOSPC:  // No space left on device
+#ifdef EDQUOT
+    case EDQUOT:  // Disk quota exceeded
+#endif
+    case EMFILE:   // Too many open files
+    case EMLINK:   // Too many links
+    case ENFILE:   // Too many open files in system
+    case ENOBUFS:  // No buffer space available
+    case ENODATA:  // No message is available on the STREAM read queue
+    case ENOMEM:   // Not enough space
+    case ENOSR:    // No STREAM resources
+#ifdef EUSERS
+    case EUSERS:  // Too many users
+#endif
+      return StatusCode::kResourceExhausted;
+#ifdef ECHRNG
+    case ECHRNG:  // Channel number out of range
+#endif
+    case EFBIG:      // File too large
+    case EOVERFLOW:  // Value too large to be stored in data type
+    case ERANGE:     // Result too large
+      return StatusCode::kOutOfRange;
+#ifdef ENOPKG
+    case ENOPKG:  // Package not installed
+#endif
+    case ENOSYS:        // Function not implemented
+    case ENOTSUP:       // Operation not supported
+    case EAFNOSUPPORT:  // Address family not supported
+#ifdef EPFNOSUPPORT
+    case EPFNOSUPPORT:  // Protocol family not supported
+#endif
+    case EPROTONOSUPPORT:  // Protocol not supported
+#ifdef ESOCKTNOSUPPORT
+    case ESOCKTNOSUPPORT:  // Socket type not supported
+#endif
+    case EXDEV:  // Improper link
+      return StatusCode::kUnimplemented;
+    case EAGAIN:  // Resource temporarily unavailable
+#ifdef ECOMM
+    case ECOMM:  // Communication error on send
+#endif
+    case ECONNREFUSED:  // Connection refused
+    case ECONNABORTED:  // Connection aborted
+    case ECONNRESET:    // Connection reset
+    case EINTR:         // Interrupted function call
+#ifdef EHOSTDOWN
+    case EHOSTDOWN:  // Host is down
+#endif
+    case EHOSTUNREACH:  // Host is unreachable
+    case ENETDOWN:      // Network is down
+    case ENETRESET:     // Connection aborted by network
+    case ENETUNREACH:   // Network unreachable
+    case ENOLCK:        // No locks available
+    case ENOLINK:       // Link has been severed
+#ifdef ENONET
+    case ENONET:  // Machine is not on the network
+#endif
+      return StatusCode::kUnavailable;
+    case EDEADLK:  // Resource deadlock avoided
+#ifdef ESTALE
+    case ESTALE:  // Stale file handle
+#endif
+      return StatusCode::kAborted;
+    case ECANCELED:  // Operation cancelled
+      return StatusCode::kCancelled;
+    default:
+      return StatusCode::kUnknown;
+  }
+}
+
+namespace {
+std::string MessageForErrnoToStatus(int error_number,
+                                    absl::string_view message) {
+  return absl::StrCat(message, ": ",
+                      absl::base_internal::StrError(error_number));
+}
+}  // namespace
+
+Status ErrnoToStatus(int error_number, absl::string_view message) {
+  return Status(ErrnoToStatusCode(error_number),
+                MessageForErrnoToStatus(error_number, message));
+}
+
+namespace status_internal {
+
+std::string* MakeCheckFailString(const absl::Status* status,
+                                 const char* prefix) {
+  return new std::string(
+      absl::StrCat(prefix, " (",
+                   status->ToString(StatusToStringMode::kWithEverything), ")"));
+}
+
+}  // namespace status_internal
+
 ABSL_NAMESPACE_END
 }  // namespace absl

data/third_party/abseil-cpp/absl/status/status.h

@@ -24,11 +24,11 @@
 //   * A set of helper functions for creating status codes and checking their
 //     values
 //
-// Within Google, `absl::Status` is the primary mechanism for gracefully
-// handling errors across API boundaries (and in particular across RPC
-// boundaries). Some of these errors may be recoverable, but others may not.
-// Most functions that can produce a recoverable error should be designed to
-// return an `absl::Status` (or `absl::StatusOr`).
+// Within Google, `absl::Status` is the primary mechanism for communicating
+// errors in C++, and is used to represent error state in both in-process
+// library calls as well as RPC calls. Some of these errors may be recoverable,
+// but others may not. Most functions that can produce a recoverable error
+// should be designed to return an `absl::Status` (or `absl::StatusOr`).
 //
 // Example:
 //
@@ -469,8 +469,9 @@ class Status final {
 
   // Status::ok()
   //
-  // Returns `true` if `this->ok()`. Prefer checking for an OK status using this
-  // member function.
+  // Returns `true` if `this->code()` == `absl::StatusCode::kOk`,
+  // indicating the absence of an error.
+  // Prefer checking for an OK status using this member function.
   ABSL_MUST_USE_RESULT bool ok() const;
 
   // Status::code()
@@ -532,7 +533,7 @@ class Status final {
   //----------------------------------------------------------------------------
 
   // A payload may be attached to a status to provide additional context to an
-  // error that may not be satisifed by an existing `absl::StatusCode`.
+  // error that may not be satisfied by an existing `absl::StatusCode`.
   // Typically, this payload serves one of several purposes:
   //
   //   * It may provide more fine-grained semantic information about the error
@@ -612,10 +613,6 @@ class Status final {
   const status_internal::Payloads* GetPayloads() const;
   status_internal::Payloads* GetPayloads();
 
-  // Takes ownership of payload.
-  static uintptr_t NewRep(
-      absl::StatusCode code, absl::string_view msg,
-      std::unique_ptr<status_internal::Payloads> payload);
   static bool EqualsSlow(const absl::Status& a, const absl::Status& b);
 
   // MSVC 14.0 limitation requires the const.
@@ -741,6 +738,19 @@ Status UnavailableError(absl::string_view message);
 Status UnimplementedError(absl::string_view message);
 Status UnknownError(absl::string_view message);
 
+// ErrnoToStatusCode()
+//
+// Returns the StatusCode for `error_number`, which should be an `errno` value.
+// See https://en.cppreference.com/w/cpp/error/errno_macros and similar
+// references.
+absl::StatusCode ErrnoToStatusCode(int error_number);
+
+// ErrnoToStatus()
+//
+// Convenience function that creates a `absl::Status` using an `error_number`,
+// which should be an `errno` value.
+Status ErrnoToStatus(int error_number, absl::string_view message);
+
 //------------------------------------------------------------------------------
 // Implementation details follow
 //------------------------------------------------------------------------------

data/third_party/abseil-cpp/absl/status/statusor.h

@@ -106,7 +106,13 @@ class BadStatusOrAccess : public std::exception {
 
 // Returned StatusOr objects may not be ignored.
 template <typename T>
+#if ABSL_HAVE_CPP_ATTRIBUTE(nodiscard)
+// TODO(b/176172494): ABSL_MUST_USE_RESULT should expand to the more strict
+// [[nodiscard]]. For now, just use [[nodiscard]] directly when it is available.
+class [[nodiscard]] StatusOr;
+#else
 class ABSL_MUST_USE_RESULT StatusOr;
+#endif  // ABSL_HAVE_CPP_ATTRIBUTE(nodiscard)
 
 // absl::StatusOr<T>
 //
@@ -156,8 +162,8 @@ class ABSL_MUST_USE_RESULT StatusOr;
 // A `absl::StatusOr<T*>` can be constructed from a null pointer like any other
 // pointer value, and the result will be that `ok()` returns `true` and
 // `value()` returns `nullptr`. Checking the value of pointer in an
-// `absl::StatusOr<T>` generally requires a bit more care, to ensure both that a
-// value is present and that value is not null:
+// `absl::StatusOr<T*>` generally requires a bit more care, to ensure both that
+// a value is present and that value is not null:
 //
 //  StatusOr<std::unique_ptr<Foo>> result = FooFactory::MakeNewFoo(arg);
 //  if (!result.ok()) {
@@ -471,7 +477,7 @@ class StatusOr : private internal_statusor::StatusOrData<T>,
   // StatusOr<T>::ok()
   //
   // Returns whether or not this `absl::StatusOr<T>` holds a `T` value. This
-  // member function is analagous to `absl::Status::ok()` and should be used
+  // member function is analogous to `absl::Status::ok()` and should be used
   // similarly to check the status of return values.
   //
   // Example:

data/third_party/abseil-cpp/absl/strings/ascii.h

@@ -133,7 +133,7 @@ inline bool ascii_isdigit(unsigned char c) { return c >= '0' && c <= '9'; }
 
 // ascii_isprint()
 //
-// Determines whether the given character is printable, including whitespace.
+// Determines whether the given character is printable, including spaces.
 inline bool ascii_isprint(unsigned char c) { return c >= 32 && c < 127; }
 
 // ascii_isgraph()
@@ -197,7 +197,7 @@ ABSL_MUST_USE_RESULT inline std::string AsciiStrToUpper(absl::string_view s) {
 ABSL_MUST_USE_RESULT inline absl::string_view StripLeadingAsciiWhitespace(
     absl::string_view str) {
   auto it = std::find_if_not(str.begin(), str.end(), absl::ascii_isspace);
-  return str.substr(it - str.begin());
+  return str.substr(static_cast<size_t>(it - str.begin()));
 }
 
 // Strips in place whitespace from the beginning of the given string.
@@ -211,13 +211,13 @@ inline void StripLeadingAsciiWhitespace(std::string* str) {
 ABSL_MUST_USE_RESULT inline absl::string_view StripTrailingAsciiWhitespace(
     absl::string_view str) {
   auto it = std::find_if_not(str.rbegin(), str.rend(), absl::ascii_isspace);
-  return str.substr(0, str.rend() - it);
+  return str.substr(0, static_cast<size_t>(str.rend() - it));
 }
 
 // Strips in place whitespace from the end of the given string
 inline void StripTrailingAsciiWhitespace(std::string* str) {
   auto it = std::find_if_not(str->rbegin(), str->rend(), absl::ascii_isspace);
-  str->erase(str->rend() - it);
+  str->erase(static_cast<size_t>(str->rend() - it));
 }
 
 // Returns absl::string_view with whitespace stripped from both ends of the