grpc 1.44.0.pre2 → 1.46.3

data/src/core/ext/filters/max_age/max_age_filter.cc

@@ -1,560 +0,0 @@
-/*
- *
- * Copyright 2017 gRPC authors.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- */
-
-#include <grpc/support/port_platform.h>
-
-#include "src/core/ext/filters/max_age/max_age_filter.h"
-
-#include <limits.h>
-#include <string.h>
-
-#include "src/core/lib/channel/channel_args.h"
-#include "src/core/lib/channel/channel_stack_builder.h"
-#include "src/core/lib/config/core_configuration.h"
-#include "src/core/lib/iomgr/timer.h"
-#include "src/core/lib/transport/http2_errors.h"
-
-/* If these settings change, make sure that we are not sending a GOAWAY for
- * inproc transport, since a GOAWAY to inproc ends up destroying the transport.
- */
-#define DEFAULT_MAX_CONNECTION_AGE_MS INT_MAX
-#define DEFAULT_MAX_CONNECTION_AGE_GRACE_MS INT_MAX
-#define DEFAULT_MAX_CONNECTION_IDLE_MS INT_MAX
-#define MAX_CONNECTION_AGE_JITTER 0.1
-
-#define MAX_CONNECTION_AGE_INTEGER_OPTIONS \
-  { DEFAULT_MAX_CONNECTION_AGE_MS, 1, INT_MAX }
-#define MAX_CONNECTION_IDLE_INTEGER_OPTIONS \
-  { DEFAULT_MAX_CONNECTION_IDLE_MS, 1, INT_MAX }
-
-/* States for idle_state in channel_data */
-#define MAX_IDLE_STATE_INIT ((gpr_atm)0)
-#define MAX_IDLE_STATE_SEEN_EXIT_IDLE ((gpr_atm)1)
-#define MAX_IDLE_STATE_SEEN_ENTER_IDLE ((gpr_atm)2)
-#define MAX_IDLE_STATE_TIMER_SET ((gpr_atm)3)
-
-namespace {
-struct channel_data {
-  /* The channel stack to which we take refs for pending callbacks. */
-  grpc_channel_stack* channel_stack;
-  /* Guards access to max_age_timer, max_age_timer_pending, max_age_grace_timer
-     and max_age_grace_timer_pending */
-  grpc_core::Mutex max_age_timer_mu;
-  /* True if the max_age timer callback is currently pending */
-  bool max_age_timer_pending ABSL_GUARDED_BY(max_age_timer_mu) = false;
-  /* True if the max_age_grace timer callback is currently pending */
-  bool max_age_grace_timer_pending ABSL_GUARDED_BY(max_age_timer_mu) = false;
-  /* The timer for checking if the channel has reached its max age */
-  grpc_timer max_age_timer ABSL_GUARDED_BY(max_age_timer_mu);
-  /* The timer for checking if the max-aged channel has uesed up the grace
-     period */
-  grpc_timer max_age_grace_timer ABSL_GUARDED_BY(max_age_timer_mu);
-  /* The timer for checking if the channel's idle duration reaches
-     max_connection_idle */
-  grpc_timer max_idle_timer;
-  /* Allowed max time a channel may have no outstanding rpcs */
-  grpc_millis max_connection_idle;
-  /* Allowed max time a channel may exist */
-  grpc_millis max_connection_age;
-  /* Allowed grace period after the channel reaches its max age */
-  grpc_millis max_connection_age_grace;
-  /* Closure to run when the channel's idle duration reaches max_connection_idle
-     and should be closed gracefully */
-  grpc_closure max_idle_timer_cb;
-  /* Closure to run when the channel reaches its max age and should be closed
-     gracefully */
-  grpc_closure close_max_age_channel;
-  /* Closure to run the channel uses up its max age grace time and should be
-     closed forcibly */
-  grpc_closure force_close_max_age_channel;
-  /* Closure to run when the init fo channel stack is done and the max_idle
-     timer should be started */
-  grpc_closure start_max_idle_timer_after_init;
-  /* Closure to run when the init fo channel stack is done and the max_age timer
-     should be started */
-  grpc_closure start_max_age_timer_after_init;
-  /* Closure to run when the goaway op is finished and the max_age_timer */
-  grpc_closure start_max_age_grace_timer_after_goaway_op;
-  /* Number of active calls */
-  gpr_atm call_count;
-  /* TODO(zyc): C++lize this state machine */
-  /* 'idle_state' holds the states of max_idle_timer and channel idleness.
-      It can contain one of the following values:
-     +--------------------------------+----------------+---------+
-     |           idle_state           | max_idle_timer | channel |
-     +--------------------------------+----------------+---------+
-     | MAX_IDLE_STATE_INIT            | unset          | busy    |
-     | MAX_IDLE_STATE_TIMER_SET       | set, valid     | idle    |
-     | MAX_IDLE_STATE_SEEN_EXIT_IDLE  | set, invalid   | busy    |
-     | MAX_IDLE_STATE_SEEN_ENTER_IDLE | set, invalid   | idle    |
-     +--------------------------------+----------------+---------+
-
-     MAX_IDLE_STATE_INIT: The initial and final state of 'idle_state'. The
-     channel has 1 or 1+ active calls, and the timer is not set. Note that
-     we may put a virtual call to hold this state at channel initialization or
-     shutdown, so that the channel won't enter other states.
-
-     MAX_IDLE_STATE_TIMER_SET: The state after the timer is set and no calls
-     have arrived after the timer is set. The channel must have 0 active call in
-     this state. If the timer is fired in this state, we will close the channel
-     due to idleness.
-
-     MAX_IDLE_STATE_SEEN_EXIT_IDLE: The state after the timer is set and at
-     least one call has arrived after the timer is set. The channel must have 1
-     or 1+ active calls in this state. If the timer is fired in this state, we
-     won't reschudle it.
-
-     MAX_IDLE_STATE_SEEN_ENTER_IDLE: The state after the timer is set and the at
-     least one call has arrived after the timer is set, BUT the channel
-     currently has 0 active calls. If the timer is fired in this state, we will
-     reschudle it.
-
-     max_idle_timer will not be cancelled (unless the channel is shutting down).
-     If the timer callback is called when the max_idle_timer is valid (i.e.
-     idle_state is MAX_IDLE_STATE_TIMER_SET), the channel will be closed due to
-     idleness, otherwise the channel won't be changed.
-
-     State transitions:
-         MAX_IDLE_STATE_INIT <-------3------ MAX_IDLE_STATE_SEEN_EXIT_IDLE
-              ^    |                              ^     ^    |
-              |    |                              |     |    |
-              1    2     +-----------4------------+     6    7
-              |    |     |                              |    |
-              |    v     |                              |    v
-       MAX_IDLE_STATE_TIMER_SET <----5------ MAX_IDLE_STATE_SEEN_ENTER_IDLE
-
-     For 1, 3, 5 :  See max_idle_timer_cb() function
-     For 2, 7    :  See decrease_call_count() function
-     For 4, 6    :  See increase_call_count() function */
-  gpr_atm idle_state;
-  /* Time when the channel finished its last outstanding call, in grpc_millis */
-  gpr_atm last_enter_idle_time_millis;
-};
-}  // namespace
-
-/* Increase the nubmer of active calls. Before the increasement, if there are no
-   calls, the max_idle_timer should be cancelled. */
-static void increase_call_count(channel_data* chand) {
-  /* Exit idle */
-  if (gpr_atm_full_fetch_add(&chand->call_count, 1) == 0) {
-    while (true) {
-      gpr_atm idle_state = gpr_atm_acq_load(&chand->idle_state);
-      switch (idle_state) {
-        case MAX_IDLE_STATE_TIMER_SET:
-          /* max_idle_timer_cb may have already set idle_state to
-             MAX_IDLE_STATE_INIT, in this case, we don't need to set it to
-             MAX_IDLE_STATE_SEEN_EXIT_IDLE */
-          gpr_atm_rel_cas(&chand->idle_state, MAX_IDLE_STATE_TIMER_SET,
-                          MAX_IDLE_STATE_SEEN_EXIT_IDLE);
-          return;
-        case MAX_IDLE_STATE_SEEN_ENTER_IDLE:
-          gpr_atm_rel_store(&chand->idle_state, MAX_IDLE_STATE_SEEN_EXIT_IDLE);
-          return;
-        default:
-          /* try again */
-          break;
-      }
-    }
-  }
-}
-
-/* Decrease the nubmer of active calls. After the decrement, if there are no
-   calls, the max_idle_timer should be started. */
-static void decrease_call_count(channel_data* chand) {
-  /* Enter idle */
-  if (gpr_atm_full_fetch_add(&chand->call_count, -1) == 1) {
-    gpr_atm_no_barrier_store(&chand->last_enter_idle_time_millis,
-                             (gpr_atm)grpc_core::ExecCtx::Get()->Now());
-    while (true) {
-      gpr_atm idle_state = gpr_atm_acq_load(&chand->idle_state);
-      switch (idle_state) {
-        case MAX_IDLE_STATE_INIT:
-          GRPC_CHANNEL_STACK_REF(chand->channel_stack,
-                                 "max_age max_idle_timer");
-          grpc_timer_init(
-              &chand->max_idle_timer,
-              grpc_core::ExecCtx::Get()->Now() + chand->max_connection_idle,
-              &chand->max_idle_timer_cb);
-          gpr_atm_rel_store(&chand->idle_state, MAX_IDLE_STATE_TIMER_SET);
-          return;
-        case MAX_IDLE_STATE_SEEN_EXIT_IDLE:
-          if (gpr_atm_rel_cas(&chand->idle_state, MAX_IDLE_STATE_SEEN_EXIT_IDLE,
-                              MAX_IDLE_STATE_SEEN_ENTER_IDLE)) {
-            return;
-          }
-          break;
-        default:
-          /* try again */
-          break;
-      }
-    }
-  }
-}
-
-static void start_max_idle_timer_after_init(void* arg,
-                                            grpc_error_handle /*error*/) {
-  channel_data* chand = static_cast<channel_data*>(arg);
-  /* Decrease call_count. If there are no active calls at this time,
-     max_idle_timer will start here. If the number of active calls is not 0,
-     max_idle_timer will start after all the active calls end. */
-  decrease_call_count(chand);
-  GRPC_CHANNEL_STACK_UNREF(chand->channel_stack,
-                           "max_age start_max_idle_timer_after_init");
-}
-
-namespace grpc_core {
-
-class ConnectivityWatcher : public AsyncConnectivityStateWatcherInterface {
- public:
-  explicit ConnectivityWatcher(channel_data* chand) : chand_(chand) {
-    GRPC_CHANNEL_STACK_REF(chand_->channel_stack, "max_age conn_watch");
-  }
-
-  ~ConnectivityWatcher() override {
-    GRPC_CHANNEL_STACK_UNREF(chand_->channel_stack, "max_age conn_watch");
-  }
-
- private:
-  void OnConnectivityStateChange(grpc_connectivity_state new_state,
-                                 const absl::Status& /* status */) override {
-    if (new_state != GRPC_CHANNEL_SHUTDOWN) return;
-    {
-      MutexLock lock(&chand_->max_age_timer_mu);
-      if (chand_->max_age_timer_pending) {
-        grpc_timer_cancel(&chand_->max_age_timer);
-        chand_->max_age_timer_pending = false;
-      }
-      if (chand_->max_age_grace_timer_pending) {
-        grpc_timer_cancel(&chand_->max_age_grace_timer);
-        chand_->max_age_grace_timer_pending = false;
-      }
-    }
-    /* If there are no active calls, this increasement will cancel
-       max_idle_timer, and prevent max_idle_timer from being started in the
-       future. */
-    increase_call_count(chand_);
-    if (gpr_atm_acq_load(&chand_->idle_state) ==
-        MAX_IDLE_STATE_SEEN_EXIT_IDLE) {
-      grpc_timer_cancel(&chand_->max_idle_timer);
-    }
-  }
-
-  channel_data* chand_;
-};
-
-}  // namespace grpc_core
-
-static void start_max_age_timer_after_init(void* arg,
-                                           grpc_error_handle /*error*/) {
-  channel_data* chand = static_cast<channel_data*>(arg);
-  {
-    grpc_core::MutexLock lock(&chand->max_age_timer_mu);
-    chand->max_age_timer_pending = true;
-    GRPC_CHANNEL_STACK_REF(chand->channel_stack, "max_age max_age_timer");
-    grpc_timer_init(
-        &chand->max_age_timer,
-        grpc_core::ExecCtx::Get()->Now() + chand->max_connection_age,
-        &chand->close_max_age_channel);
-  }
-  grpc_transport_op* op = grpc_make_transport_op(nullptr);
-  op->start_connectivity_watch.reset(new grpc_core::ConnectivityWatcher(chand));
-  op->start_connectivity_watch_state = GRPC_CHANNEL_IDLE;
-  grpc_channel_next_op(grpc_channel_stack_element(chand->channel_stack, 0), op);
-  GRPC_CHANNEL_STACK_UNREF(chand->channel_stack,
-                           "max_age start_max_age_timer_after_init");
-}
-
-static void start_max_age_grace_timer_after_goaway_op(
-    void* arg, grpc_error_handle /*error*/) {
-  channel_data* chand = static_cast<channel_data*>(arg);
-  {
-    grpc_core::MutexLock lock(&chand->max_age_timer_mu);
-    chand->max_age_grace_timer_pending = true;
-    GRPC_CHANNEL_STACK_REF(chand->channel_stack, "max_age max_age_grace_timer");
-    grpc_timer_init(&chand->max_age_grace_timer,
-                    chand->max_connection_age_grace == GRPC_MILLIS_INF_FUTURE
-                        ? GRPC_MILLIS_INF_FUTURE
-                        : grpc_core::ExecCtx::Get()->Now() +
-                              chand->max_connection_age_grace,
-                    &chand->force_close_max_age_channel);
-  }
-  GRPC_CHANNEL_STACK_UNREF(chand->channel_stack,
-                           "max_age start_max_age_grace_timer_after_goaway_op");
-}
-
-static void close_max_idle_channel(channel_data* chand) {
-  /* Prevent the max idle timer from being set again */
-  gpr_atm_no_barrier_fetch_add(&chand->call_count, 1);
-  grpc_transport_op* op = grpc_make_transport_op(nullptr);
-  op->goaway_error =
-      grpc_error_set_int(GRPC_ERROR_CREATE_FROM_STATIC_STRING("max_idle"),
-                         GRPC_ERROR_INT_HTTP2_ERROR, GRPC_HTTP2_NO_ERROR);
-  grpc_channel_element* elem =
-      grpc_channel_stack_element(chand->channel_stack, 0);
-  elem->filter->start_transport_op(elem, op);
-}
-
-static void max_idle_timer_cb(void* arg, grpc_error_handle error) {
-  channel_data* chand = static_cast<channel_data*>(arg);
-  if (error == GRPC_ERROR_NONE) {
-    bool try_again = true;
-    while (try_again) {
-      gpr_atm idle_state = gpr_atm_acq_load(&chand->idle_state);
-      switch (idle_state) {
-        case MAX_IDLE_STATE_TIMER_SET:
-          close_max_idle_channel(chand);
-          /* This MAX_IDLE_STATE_INIT is a final state, we don't have to check
-           * if idle_state has been changed */
-          gpr_atm_rel_store(&chand->idle_state, MAX_IDLE_STATE_INIT);
-          try_again = false;
-          break;
-        case MAX_IDLE_STATE_SEEN_EXIT_IDLE:
-          if (gpr_atm_rel_cas(&chand->idle_state, MAX_IDLE_STATE_SEEN_EXIT_IDLE,
-                              MAX_IDLE_STATE_INIT)) {
-            try_again = false;
-          }
-          break;
-        case MAX_IDLE_STATE_SEEN_ENTER_IDLE:
-          GRPC_CHANNEL_STACK_REF(chand->channel_stack,
-                                 "max_age max_idle_timer");
-          grpc_timer_init(&chand->max_idle_timer,
-                          static_cast<grpc_millis>(gpr_atm_no_barrier_load(
-                              &chand->last_enter_idle_time_millis)) +
-                              chand->max_connection_idle,
-                          &chand->max_idle_timer_cb);
-          /* idle_state may have already been set to
-             MAX_IDLE_STATE_SEEN_EXIT_IDLE by increase_call_count(), in this
-             case, we don't need to set it to MAX_IDLE_STATE_TIMER_SET */
-          gpr_atm_rel_cas(&chand->idle_state, MAX_IDLE_STATE_SEEN_ENTER_IDLE,
-                          MAX_IDLE_STATE_TIMER_SET);
-          try_again = false;
-          break;
-        default:
-          /* try again */
-          break;
-      }
-    }
-  }
-  GRPC_CHANNEL_STACK_UNREF(chand->channel_stack, "max_age max_idle_timer");
-}
-
-static void close_max_age_channel(void* arg, grpc_error_handle error) {
-  channel_data* chand = static_cast<channel_data*>(arg);
-  {
-    grpc_core::MutexLock lock(&chand->max_age_timer_mu);
-    chand->max_age_timer_pending = false;
-  }
-  if (error == GRPC_ERROR_NONE) {
-    GRPC_CHANNEL_STACK_REF(chand->channel_stack,
-                           "max_age start_max_age_grace_timer_after_goaway_op");
-    grpc_transport_op* op = grpc_make_transport_op(
-        &chand->start_max_age_grace_timer_after_goaway_op);
-    op->goaway_error =
-        grpc_error_set_int(GRPC_ERROR_CREATE_FROM_STATIC_STRING("max_age"),
-                           GRPC_ERROR_INT_HTTP2_ERROR, GRPC_HTTP2_NO_ERROR);
-    grpc_channel_element* elem =
-        grpc_channel_stack_element(chand->channel_stack, 0);
-    elem->filter->start_transport_op(elem, op);
-  } else if (error != GRPC_ERROR_CANCELLED) {
-    GRPC_LOG_IF_ERROR("close_max_age_channel", error);
-  }
-  GRPC_CHANNEL_STACK_UNREF(chand->channel_stack, "max_age max_age_timer");
-}
-
-static void force_close_max_age_channel(void* arg, grpc_error_handle error) {
-  channel_data* chand = static_cast<channel_data*>(arg);
-  {
-    grpc_core::MutexLock lock(&chand->max_age_timer_mu);
-    chand->max_age_grace_timer_pending = false;
-  }
-  if (error == GRPC_ERROR_NONE) {
-    grpc_transport_op* op = grpc_make_transport_op(nullptr);
-    op->disconnect_with_error =
-        GRPC_ERROR_CREATE_FROM_STATIC_STRING("Channel reaches max age");
-    grpc_channel_element* elem =
-        grpc_channel_stack_element(chand->channel_stack, 0);
-    elem->filter->start_transport_op(elem, op);
-  } else if (error != GRPC_ERROR_CANCELLED) {
-    GRPC_LOG_IF_ERROR("force_close_max_age_channel", error);
-  }
-  GRPC_CHANNEL_STACK_UNREF(chand->channel_stack, "max_age max_age_grace_timer");
-}
-
-/* A random jitter of +/-10% will be added to MAX_CONNECTION_AGE to spread out
-   connection storms. Note that the MAX_CONNECTION_AGE option without jitter
-   would not create connection storms by itself, but if there happened to be a
-   connection storm it could cause it to repeat at a fixed period. */
-static grpc_millis
-add_random_max_connection_age_jitter_and_convert_to_grpc_millis(int value) {
-  /* generate a random number between 1 - MAX_CONNECTION_AGE_JITTER and
-     1 + MAX_CONNECTION_AGE_JITTER */
-  double multiplier = rand() * MAX_CONNECTION_AGE_JITTER * 2.0 / RAND_MAX +
-                      1.0 - MAX_CONNECTION_AGE_JITTER;
-  double result = multiplier * value;
-  /* INT_MAX - 0.5 converts the value to float, so that result will not be
-     cast to int implicitly before the comparison. */
-  return result > (static_cast<double>(GRPC_MILLIS_INF_FUTURE)) - 0.5
-             ? GRPC_MILLIS_INF_FUTURE
-             : static_cast<grpc_millis>(result);
-}
-
-/* Constructor for call_data. */
-static grpc_error_handle max_age_init_call_elem(
-    grpc_call_element* elem, const grpc_call_element_args* /*args*/) {
-  channel_data* chand = static_cast<channel_data*>(elem->channel_data);
-  increase_call_count(chand);
-  return GRPC_ERROR_NONE;
-}
-
-/* Destructor for call_data. */
-static void max_age_destroy_call_elem(
-    grpc_call_element* elem, const grpc_call_final_info* /*final_info*/,
-    grpc_closure* /*ignored*/) {
-  channel_data* chand = static_cast<channel_data*>(elem->channel_data);
-  decrease_call_count(chand);
-}
-
-/* Constructor for channel_data. */
-static grpc_error_handle max_age_init_channel_elem(
-    grpc_channel_element* elem, grpc_channel_element_args* args) {
-  channel_data* chand = static_cast<channel_data*>(elem->channel_data);
-  new (chand) channel_data();
-  chand->channel_stack = args->channel_stack;
-  chand->max_connection_age =
-      add_random_max_connection_age_jitter_and_convert_to_grpc_millis(
-          DEFAULT_MAX_CONNECTION_AGE_MS);
-  chand->max_connection_age_grace =
-      DEFAULT_MAX_CONNECTION_AGE_GRACE_MS == INT_MAX
-          ? GRPC_MILLIS_INF_FUTURE
-          : DEFAULT_MAX_CONNECTION_AGE_GRACE_MS;
-  chand->max_connection_idle = DEFAULT_MAX_CONNECTION_IDLE_MS == INT_MAX
-                                   ? GRPC_MILLIS_INF_FUTURE
-                                   : DEFAULT_MAX_CONNECTION_IDLE_MS;
-  chand->idle_state = MAX_IDLE_STATE_INIT;
-  gpr_atm_no_barrier_store(&chand->last_enter_idle_time_millis, GPR_ATM_MIN);
-  for (size_t i = 0; i < args->channel_args->num_args; ++i) {
-    if (0 == strcmp(args->channel_args->args[i].key,
-                    GRPC_ARG_MAX_CONNECTION_AGE_MS)) {
-      const int value = grpc_channel_arg_get_integer(
-          &args->channel_args->args[i], MAX_CONNECTION_AGE_INTEGER_OPTIONS);
-      chand->max_connection_age =
-          add_random_max_connection_age_jitter_and_convert_to_grpc_millis(
-              value);
-    } else if (0 == strcmp(args->channel_args->args[i].key,
-                           GRPC_ARG_MAX_CONNECTION_AGE_GRACE_MS)) {
-      const int value = grpc_channel_arg_get_integer(
-          &args->channel_args->args[i],
-          {DEFAULT_MAX_CONNECTION_AGE_GRACE_MS, 0, INT_MAX});
-      chand->max_connection_age_grace =
-          value == INT_MAX ? GRPC_MILLIS_INF_FUTURE : value;
-    } else if (0 == strcmp(args->channel_args->args[i].key,
-                           GRPC_ARG_MAX_CONNECTION_IDLE_MS)) {
-      const int value = grpc_channel_arg_get_integer(
-          &args->channel_args->args[i], MAX_CONNECTION_IDLE_INTEGER_OPTIONS);
-      chand->max_connection_idle =
-          value == INT_MAX ? GRPC_MILLIS_INF_FUTURE : value;
-    }
-  }
-  GRPC_CLOSURE_INIT(&chand->max_idle_timer_cb, max_idle_timer_cb, chand,
-                    grpc_schedule_on_exec_ctx);
-  GRPC_CLOSURE_INIT(&chand->close_max_age_channel, close_max_age_channel, chand,
-                    grpc_schedule_on_exec_ctx);
-  GRPC_CLOSURE_INIT(&chand->force_close_max_age_channel,
-                    force_close_max_age_channel, chand,
-                    grpc_schedule_on_exec_ctx);
-  GRPC_CLOSURE_INIT(&chand->start_max_idle_timer_after_init,
-                    start_max_idle_timer_after_init, chand,
-                    grpc_schedule_on_exec_ctx);
-  GRPC_CLOSURE_INIT(&chand->start_max_age_timer_after_init,
-                    start_max_age_timer_after_init, chand,
-                    grpc_schedule_on_exec_ctx);
-  GRPC_CLOSURE_INIT(&chand->start_max_age_grace_timer_after_goaway_op,
-                    start_max_age_grace_timer_after_goaway_op, chand,
-                    grpc_schedule_on_exec_ctx);
-
-  if (chand->max_connection_age != GRPC_MILLIS_INF_FUTURE) {
-    /* When the channel reaches its max age, we send down an op with
-       goaway_error set.  However, we can't send down any ops until after the
-       channel stack is fully initialized.  If we start the timer here, we have
-       no guarantee that the timer won't pop before channel stack initialization
-       is finished.  To avoid that problem, we create a closure to start the
-       timer, and we schedule that closure to be run after call stack
-       initialization is done. */
-    GRPC_CHANNEL_STACK_REF(chand->channel_stack,
-                           "max_age start_max_age_timer_after_init");
-    grpc_core::ExecCtx::Run(DEBUG_LOCATION,
-                            &chand->start_max_age_timer_after_init,
-                            GRPC_ERROR_NONE);
-  }
-
-  /* Initialize the number of calls as 1, so that the max_idle_timer will not
-     start until start_max_idle_timer_after_init is invoked. */
-  gpr_atm_rel_store(&chand->call_count, 1);
-  if (chand->max_connection_idle != GRPC_MILLIS_INF_FUTURE) {
-    GRPC_CHANNEL_STACK_REF(chand->channel_stack,
-                           "max_age start_max_idle_timer_after_init");
-    grpc_core::ExecCtx::Run(DEBUG_LOCATION,
-                            &chand->start_max_idle_timer_after_init,
-                            GRPC_ERROR_NONE);
-  }
-  return GRPC_ERROR_NONE;
-}
-
-/* Destructor for channel_data. */
-static void max_age_destroy_channel_elem(grpc_channel_element* elem) {
-  channel_data* chand = static_cast<channel_data*>(elem->channel_data);
-  chand->~channel_data();
-}
-
-const grpc_channel_filter grpc_max_age_filter = {
-    grpc_call_next_op,
-    grpc_channel_next_op,
-    0, /* sizeof_call_data */
-    max_age_init_call_elem,
-    grpc_call_stack_ignore_set_pollset_or_pollset_set,
-    max_age_destroy_call_elem,
-    sizeof(channel_data),
-    max_age_init_channel_elem,
-    max_age_destroy_channel_elem,
-    grpc_channel_next_get_info,
-    "max_age"};
-
-namespace grpc_core {
-void RegisterMaxAgeFilter(CoreConfiguration::Builder* builder) {
-  builder->channel_init()->RegisterStage(
-      GRPC_SERVER_CHANNEL, GRPC_CHANNEL_INIT_BUILTIN_PRIORITY,
-      [](grpc_channel_stack_builder* builder) {
-        const grpc_channel_args* channel_args =
-            grpc_channel_stack_builder_get_channel_arguments(builder);
-        bool enable = grpc_channel_arg_get_integer(
-                          grpc_channel_args_find(
-                              channel_args, GRPC_ARG_MAX_CONNECTION_AGE_MS),
-                          MAX_CONNECTION_AGE_INTEGER_OPTIONS) != INT_MAX ||
-                      grpc_channel_arg_get_integer(
-                          grpc_channel_args_find(
-                              channel_args, GRPC_ARG_MAX_CONNECTION_IDLE_MS),
-                          MAX_CONNECTION_IDLE_INTEGER_OPTIONS) != INT_MAX;
-        if (enable) {
-          return grpc_channel_stack_builder_prepend_filter(
-              builder, &grpc_max_age_filter, nullptr, nullptr);
-        } else {
-          return true;
-        }
-      });
-}
-}  // namespace grpc_core

data/src/core/ext/transport/chttp2/client/insecure/channel_create.cc

@@ -1,122 +0,0 @@
-//
-// Copyright 2015 gRPC authors.
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-//     http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-//
-
-#include <grpc/support/port_platform.h>
-
-#include <string.h>
-
-#include <grpc/grpc.h>
-#include <grpc/support/alloc.h>
-#include <grpc/support/string_util.h>
-
-#include "src/core/ext/filters/client_channel/client_channel.h"
-#include "src/core/ext/transport/chttp2/client/chttp2_connector.h"
-#include "src/core/lib/channel/channel_args.h"
-#include "src/core/lib/resolver/resolver_registry.h"
-#include "src/core/lib/resource_quota/api.h"
-#include "src/core/lib/surface/api_trace.h"
-#include "src/core/lib/surface/channel.h"
-
-namespace grpc_core {
-
-class Chttp2InsecureClientChannelFactory : public ClientChannelFactory {
- public:
-  RefCountedPtr<Subchannel> CreateSubchannel(
-      const grpc_resolved_address& address,
-      const grpc_channel_args* args) override {
-    return Subchannel::Create(MakeOrphanable<Chttp2Connector>(), address, args);
-  }
-};
-
-namespace {
-
-grpc_channel* CreateChannel(const char* target, const grpc_channel_args* args,
-                            grpc_error_handle* error) {
-  if (target == nullptr) {
-    gpr_log(GPR_ERROR, "cannot create channel with NULL target name");
-    if (error != nullptr) {
-      *error = GRPC_ERROR_CREATE_FROM_STATIC_STRING("channel target is NULL");
-    }
-    return nullptr;
-  }
-  // Add channel arg containing the server URI.
-  UniquePtr<char> canonical_target =
-      ResolverRegistry::AddDefaultPrefixIfNeeded(target);
-  grpc_arg arg = grpc_channel_arg_string_create(
-      const_cast<char*>(GRPC_ARG_SERVER_URI), canonical_target.get());
-  const char* to_remove[] = {GRPC_ARG_SERVER_URI};
-  grpc_channel_args* new_args0 =
-      grpc_channel_args_copy_and_add_and_remove(args, to_remove, 1, &arg, 1);
-  const grpc_channel_args* new_args = CoreConfiguration::Get()
-                                          .channel_args_preconditioning()
-                                          .PreconditionChannelArgs(new_args0);
-  grpc_channel_args_destroy(new_args0);
-  grpc_channel* channel = grpc_channel_create(
-      target, new_args, GRPC_CLIENT_CHANNEL, nullptr, error);
-  grpc_channel_args_destroy(new_args);
-  return channel;
-}
-
-}  // namespace
-
-}  // namespace grpc_core
-
-namespace {
-
-grpc_core::Chttp2InsecureClientChannelFactory* g_factory;
-gpr_once g_factory_once = GPR_ONCE_INIT;
-
-void FactoryInit() {
-  g_factory = new grpc_core::Chttp2InsecureClientChannelFactory();
-}
-
-}  // namespace
-
-/* Create a client channel:
-   Asynchronously: - resolve target
-                   - connect to it (trying alternatives as presented)
-                   - perform handshakes */
-grpc_channel* grpc_insecure_channel_create(const char* target,
-                                           const grpc_channel_args* args,
-                                           void* reserved) {
-  grpc_core::ExecCtx exec_ctx;
-  GRPC_API_TRACE(
-      "grpc_insecure_channel_create(target=%s, args=%p, reserved=%p)", 3,
-      (target, args, reserved));
-  GPR_ASSERT(reserved == nullptr);
-  // Add channel arg containing the client channel factory.
-  gpr_once_init(&g_factory_once, FactoryInit);
-  grpc_arg arg = grpc_core::ClientChannelFactory::CreateChannelArg(g_factory);
-  const char* arg_to_remove = arg.key;
-  grpc_channel_args* new_args = grpc_channel_args_copy_and_add_and_remove(
-      args, &arg_to_remove, 1, &arg, 1);
-  grpc_error_handle error = GRPC_ERROR_NONE;
-  // Create channel.
-  grpc_channel* channel = grpc_core::CreateChannel(target, new_args, &error);
-  // Clean up.
-  grpc_channel_args_destroy(new_args);
-  if (channel == nullptr) {
-    intptr_t integer;
-    grpc_status_code status = GRPC_STATUS_INTERNAL;
-    if (grpc_error_get_int(error, GRPC_ERROR_INT_GRPC_STATUS, &integer)) {
-      status = static_cast<grpc_status_code>(integer);
-    }
-    GRPC_ERROR_UNREF(error);
-    channel = grpc_lame_client_channel_create(
-        target, status, "Failed to create client channel");
-  }
-  return channel;
-}