google-api-client 0.41.1 → 0.43.0

data/generated/google/apis/sasportal_v1alpha1/service.rb

@@ -79,12 +79,10 @@ module Google
         
         # Returns a list of requested customers.
         # @param [Fixnum] page_size
-        #   The maximum number of customers
-        #   to return in the response.
+        #   The maximum number of customers to return in the response.
         # @param [String] page_token
         #   A pagination token returned from a previous call to ListCustomers method that
-        #   indicates where
-        #   this listing should continue from.
+        #   indicates where this listing should continue from.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -215,8 +213,7 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Creates a signed device under a
-        # node or customer.
+        # Creates a signed device under a node or customer.
         # @param [String] parent
         #   Required. The name of the parent resource.
         # @param [Google::Apis::SasportalV1alpha1::SasPortalCreateSignedDeviceRequest] sas_portal_create_signed_device_request_object
@@ -313,16 +310,15 @@ module Google
         # @param [String] parent
         #   Required. The name of the parent resource.
         # @param [String] filter
-        #   The filter expression. The filter should have one of the following
-        #   formats: "sn=123454" or "display_name=MyDevice". sn
-        #   corresponds to serial_number of the device. The filter is case insensitive.
+        #   The filter expression. The filter should have one of the following formats: "
+        #   sn=123454" or "display_name=MyDevice". sn corresponds to serial_number of the
+        #   device. The filter is case insensitive.
         # @param [Fixnum] page_size
-        #   The maximum number of devices to return in the response.
-        #   If empty or zero, all devices will be listed.
-        #   Must be in the range [0, 1000].
+        #   The maximum number of devices to return in the response. If empty or zero, all
+        #   devices will be listed. Must be in the range [0, 1000].
         # @param [String] page_token
-        #   A pagination token returned from a previous call to ListDevices
-        #   that indicates where this listing should continue from.
+        #   A pagination token returned from a previous call to ListDevices that indicates
+        #   where this listing should continue from.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -587,8 +583,8 @@ module Google
         # @param [Fixnum] page_size
         #   The maximum number of nodes to return in the response.
         # @param [String] page_token
-        #   A pagination token returned from a previous call to ListNodes method
-        #   that indicates where this listing should continue from.
+        #   A pagination token returned from a previous call to ListNodes method that
+        #   indicates where this listing should continue from.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -620,8 +616,7 @@ module Google
         
         # Moves a node under another node or customer.
         # @param [String] name
-        #   Required. The name of the node to
-        #   move.
+        #   Required. The name of the node to move.
         # @param [Google::Apis::SasportalV1alpha1::SasPortalMoveNodeRequest] sas_portal_move_node_request_object
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
@@ -727,8 +722,8 @@ module Google
         # @param [Fixnum] page_size
         #   The maximum number of nodes to return in the response.
         # @param [String] page_token
-        #   A pagination token returned from a previous call to ListNodes method
-        #   that indicates where this listing should continue from.
+        #   A pagination token returned from a previous call to ListNodes method that
+        #   indicates where this listing should continue from.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -914,8 +909,7 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Creates a signed device under a
-        # node or customer.
+        # Creates a signed device under a node or customer.
         # @param [String] parent
         #   Required. The name of the parent resource.
         # @param [Google::Apis::SasportalV1alpha1::SasPortalCreateSignedDeviceRequest] sas_portal_create_signed_device_request_object
@@ -1012,16 +1006,15 @@ module Google
         # @param [String] parent
         #   Required. The name of the parent resource.
         # @param [String] filter
-        #   The filter expression. The filter should have one of the following
-        #   formats: "sn=123454" or "display_name=MyDevice". sn
-        #   corresponds to serial_number of the device. The filter is case insensitive.
+        #   The filter expression. The filter should have one of the following formats: "
+        #   sn=123454" or "display_name=MyDevice". sn corresponds to serial_number of the
+        #   device. The filter is case insensitive.
         # @param [Fixnum] page_size
-        #   The maximum number of devices to return in the response.
-        #   If empty or zero, all devices will be listed.
-        #   Must be in the range [0, 1000].
+        #   The maximum number of devices to return in the response. If empty or zero, all
+        #   devices will be listed. Must be in the range [0, 1000].
         # @param [String] page_token
-        #   A pagination token returned from a previous call to ListDevices
-        #   that indicates where this listing should continue from.
+        #   A pagination token returned from a previous call to ListDevices that indicates
+        #   where this listing should continue from.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -1286,8 +1279,8 @@ module Google
         # @param [Fixnum] page_size
         #   The maximum number of nodes to return in the response.
         # @param [String] page_token
-        #   A pagination token returned from a previous call to ListNodes method
-        #   that indicates where this listing should continue from.
+        #   A pagination token returned from a previous call to ListNodes method that
+        #   indicates where this listing should continue from.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -1319,8 +1312,7 @@ module Google
         
         # Moves a node under another node or customer.
         # @param [String] name
-        #   Required. The name of the node to
-        #   move.
+        #   Required. The name of the node to move.
         # @param [Google::Apis::SasportalV1alpha1::SasPortalMoveNodeRequest] sas_portal_move_node_request_object
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
@@ -1453,8 +1445,7 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Creates a signed device under a
-        # node or customer.
+        # Creates a signed device under a node or customer.
         # @param [String] parent
         #   Required. The name of the parent resource.
         # @param [Google::Apis::SasportalV1alpha1::SasPortalCreateSignedDeviceRequest] sas_portal_create_signed_device_request_object
@@ -1491,16 +1482,15 @@ module Google
         # @param [String] parent
         #   Required. The name of the parent resource.
         # @param [String] filter
-        #   The filter expression. The filter should have one of the following
-        #   formats: "sn=123454" or "display_name=MyDevice". sn
-        #   corresponds to serial_number of the device. The filter is case insensitive.
+        #   The filter expression. The filter should have one of the following formats: "
+        #   sn=123454" or "display_name=MyDevice". sn corresponds to serial_number of the
+        #   device. The filter is case insensitive.
         # @param [Fixnum] page_size
-        #   The maximum number of devices to return in the response.
-        #   If empty or zero, all devices will be listed.
-        #   Must be in the range [0, 1000].
+        #   The maximum number of devices to return in the response. If empty or zero, all
+        #   devices will be listed. Must be in the range [0, 1000].
         # @param [String] page_token
-        #   A pagination token returned from a previous call to ListDevices
-        #   that indicates where this listing should continue from.
+        #   A pagination token returned from a previous call to ListDevices that indicates
+        #   where this listing should continue from.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -1570,8 +1560,8 @@ module Google
         # @param [Fixnum] page_size
         #   The maximum number of nodes to return in the response.
         # @param [String] page_token
-        #   A pagination token returned from a previous call to ListNodes method
-        #   that indicates where this listing should continue from.
+        #   A pagination token returned from a previous call to ListNodes method that
+        #   indicates where this listing should continue from.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -1601,9 +1591,8 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Gets the access control policy for a resource.
-        # Returns an empty policy if the resource exists and does not have a policy
-        # set.
+        # Gets the access control policy for a resource. Returns an empty policy if the
+        # resource exists and does not have a policy set.
         # @param [Google::Apis::SasportalV1alpha1::SasPortalGetPolicyRequest] sas_portal_get_policy_request_object
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.

data/generated/google/apis/searchconsole_v1.rb

@@ -18,14 +18,15 @@ require 'google/apis/searchconsole_v1/representations.rb'
 
 module Google
   module Apis
-    # Google Search Console URL Testing Tools API
+    # Google Search Console API
     #
-    # Provides tools for running validation tests against single URLs
+    # The Search Console API provides access to both Search Console data (verified
+    # users only) and to public information on an URL basis (anyone)
     #
     # @see https://developers.google.com/webmaster-tools/search-console-api/
     module SearchconsoleV1
       VERSION = 'V1'
-      REVISION = '20200208'
+      REVISION = '20200803'
     end
   end
 end

data/generated/google/apis/searchconsole_v1/classes.rb

@@ -45,8 +45,8 @@ module Google
       class Image
         include Google::Apis::Core::Hashable
       
-        # Image data in format determined by the mime type. Currently, the format
-        # will always be "image/png", but this might change in the future.
+        # Image data in format determined by the mime type. Currently, the format will
+        # always be "image/png", but this might change in the future.
         # Corresponds to the JSON property `data`
         # NOTE: Values are automatically base64 encoded/decoded in the client library.
         # @return [String]

data/generated/google/apis/searchconsole_v1/service.rb

@@ -20,9 +20,10 @@ require 'google/apis/errors'
 module Google
   module Apis
     module SearchconsoleV1
-      # Google Search Console URL Testing Tools API
+      # Google Search Console API
       #
-      # Provides tools for running validation tests against single URLs
+      # The Search Console API provides access to both Search Console data (verified
+      #  users only) and to public information on an URL basis (anyone)
       #
       # @example
       #    require 'google/apis/searchconsole_v1'

data/generated/google/apis/securitycenter_v1.rb

@@ -26,7 +26,7 @@ module Google
     # @see https://console.cloud.google.com/apis/api/securitycenter.googleapis.com/overview
     module SecuritycenterV1
       VERSION = 'V1'
-      REVISION = '20200619'
+      REVISION = '20200731'
 
       # View and manage your data across Google Cloud Platform services
       AUTH_CLOUD_PLATFORM = 'https://www.googleapis.com/auth/cloud-platform'

data/generated/google/apis/securitycenter_v1/classes.rb

@@ -22,12 +22,11 @@ module Google
   module Apis
     module SecuritycenterV1
       
-      # Security Command Center representation of a Google Cloud
-      # resource.
-      # The Asset is a Security Command Center resource that captures information
-      # about a single Google Cloud resource. All modifications to an Asset are only
-      # within the context of Security Command Center and don't affect the referenced
-      # Google Cloud resource.
+      # Security Command Center representation of a Google Cloud resource. The Asset
+      # is a Security Command Center resource that captures information about a single
+      # Google Cloud resource. All modifications to an Asset are only within the
+      # context of Security Command Center and don't affect the referenced Google
+      # Cloud resource.
       class Asset
         include Google::Apis::Core::Hashable
       
@@ -38,22 +37,20 @@ module Google
       
         # Cloud IAM Policy information associated with the Google Cloud resource
         # described by the Security Command Center asset. This information is managed
-        # and defined by the Google Cloud resource and cannot be modified by the
-        # user.
+        # and defined by the Google Cloud resource and cannot be modified by the user.
         # Corresponds to the JSON property `iamPolicy`
         # @return [Google::Apis::SecuritycenterV1::IamPolicy]
         attr_accessor :iam_policy
       
-        # The relative resource name of this asset. See:
-        # https://cloud.google.com/apis/design/resource_names#relative_resource_name
-        # Example:
-        # "organizations/`organization_id`/assets/`asset_id`".
+        # The relative resource name of this asset. See: https://cloud.google.com/apis/
+        # design/resource_names#relative_resource_name Example: "organizations/`
+        # organization_id`/assets/`asset_id`".
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
       
-        # Resource managed properties. These properties are managed and defined by
-        # the Google Cloud resource and cannot be modified by the user.
+        # Resource managed properties. These properties are managed and defined by the
+        # Google Cloud resource and cannot be modified by the user.
         # Corresponds to the JSON property `resourceProperties`
         # @return [Hash<String,Object>]
         attr_accessor :resource_properties
@@ -64,10 +61,10 @@ module Google
         # @return [Google::Apis::SecuritycenterV1::SecurityCenterProperties]
         attr_accessor :security_center_properties
       
-        # User specified security marks that are attached to the parent Security
-        # Command Center resource. Security marks are scoped within a Security Command
-        # Center organization -- they can be modified and viewed by all users who have
-        # proper permissions on the organization.
+        # User specified security marks that are attached to the parent Security Command
+        # Center resource. Security marks are scoped within a Security Command Center
+        # organization -- they can be modified and viewed by all users who have proper
+        # permissions on the organization.
         # Corresponds to the JSON property `securityMarks`
         # @return [Google::Apis::SecuritycenterV1::SecurityMarks]
         attr_accessor :security_marks
@@ -119,53 +116,21 @@ module Google
         end
       end
       
-      # Specifies the audit configuration for a service.
-      # The configuration determines which permission types are logged, and what
-      # identities, if any, are exempted from logging.
-      # An AuditConfig must have one or more AuditLogConfigs.
-      # If there are AuditConfigs for both `allServices` and a specific service,
-      # the union of the two AuditConfigs is used for that service: the log_types
-      # specified in each AuditConfig are enabled, and the exempted_members in each
-      # AuditLogConfig are exempted.
-      # Example Policy with multiple AuditConfigs:
-      # `
-      # "audit_configs": [
-      # `
-      # "service": "allServices",
-      # "audit_log_configs": [
-      # `
-      # "log_type": "DATA_READ",
-      # "exempted_members": [
-      # "user:jose@example.com"
-      # ]
-      # `,
-      # `
-      # "log_type": "DATA_WRITE"
-      # `,
-      # `
-      # "log_type": "ADMIN_READ"
-      # `
-      # ]
-      # `,
-      # `
-      # "service": "sampleservice.googleapis.com",
-      # "audit_log_configs": [
-      # `
-      # "log_type": "DATA_READ"
-      # `,
-      # `
-      # "log_type": "DATA_WRITE",
-      # "exempted_members": [
-      # "user:aliya@example.com"
-      # ]
-      # `
-      # ]
-      # `
-      # ]
-      # `
-      # For sampleservice, this policy enables DATA_READ, DATA_WRITE and ADMIN_READ
-      # logging. It also exempts jose@example.com from DATA_READ logging, and
-      # aliya@example.com from DATA_WRITE logging.
+      # Specifies the audit configuration for a service. The configuration determines
+      # which permission types are logged, and what identities, if any, are exempted
+      # from logging. An AuditConfig must have one or more AuditLogConfigs. If there
+      # are AuditConfigs for both `allServices` and a specific service, the union of
+      # the two AuditConfigs is used for that service: the log_types specified in each
+      # AuditConfig are enabled, and the exempted_members in each AuditLogConfig are
+      # exempted. Example Policy with multiple AuditConfigs: ` "audit_configs": [ ` "
+      # service": "allServices", "audit_log_configs": [ ` "log_type": "DATA_READ", "
+      # exempted_members": [ "user:jose@example.com" ] `, ` "log_type": "DATA_WRITE" `,
+      # ` "log_type": "ADMIN_READ" ` ] `, ` "service": "sampleservice.googleapis.com",
+      # "audit_log_configs": [ ` "log_type": "DATA_READ" `, ` "log_type": "DATA_WRITE"
+      # , "exempted_members": [ "user:aliya@example.com" ] ` ] ` ] ` For sampleservice,
+      # this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also
+      # exempts jose@example.com from DATA_READ logging, and aliya@example.com from
+      # DATA_WRITE logging.
       class AuditConfig
         include Google::Apis::Core::Hashable
       
@@ -174,9 +139,9 @@ module Google
         # @return [Array<Google::Apis::SecuritycenterV1::AuditLogConfig>]
         attr_accessor :audit_log_configs
       
-        # Specifies a service that will be enabled for audit logging.
-        # For example, `storage.googleapis.com`, `cloudsql.googleapis.com`.
-        # `allServices` is a special value that covers all services.
+        # Specifies a service that will be enabled for audit logging. For example, `
+        # storage.googleapis.com`, `cloudsql.googleapis.com`. `allServices` is a special
+        # value that covers all services.
         # Corresponds to the JSON property `service`
         # @return [String]
         attr_accessor :service
@@ -192,28 +157,15 @@ module Google
         end
       end
       
-      # Provides the configuration for logging a type of permissions.
-      # Example:
-      # `
-      # "audit_log_configs": [
-      # `
-      # "log_type": "DATA_READ",
-      # "exempted_members": [
-      # "user:jose@example.com"
-      # ]
-      # `,
-      # `
-      # "log_type": "DATA_WRITE"
-      # `
-      # ]
-      # `
-      # This enables 'DATA_READ' and 'DATA_WRITE' logging, while exempting
-      # jose@example.com from DATA_READ logging.
+      # Provides the configuration for logging a type of permissions. Example: ` "
+      # audit_log_configs": [ ` "log_type": "DATA_READ", "exempted_members": [ "user:
+      # jose@example.com" ] `, ` "log_type": "DATA_WRITE" ` ] ` This enables '
+      # DATA_READ' and 'DATA_WRITE' logging, while exempting jose@example.com from
+      # DATA_READ logging.
       class AuditLogConfig
         include Google::Apis::Core::Hashable
       
-        # Specifies the identities that do not cause logging for this type of
-        # permission.
+        # Specifies the identities that do not cause logging for this type of permission.
         # Follows the same format of Binding.members.
         # Corresponds to the JSON property `exemptedMembers`
         # @return [Array<String>]
@@ -239,69 +191,57 @@ module Google
       class Binding
         include Google::Apis::Core::Hashable
       
-        # Represents a textual expression in the Common Expression Language (CEL)
-        # syntax. CEL is a C-like expression language. The syntax and semantics of CEL
-        # are documented at https://github.com/google/cel-spec.
-        # Example (Comparison):
-        # title: "Summary size limit"
-        # description: "Determines if a summary is less than 100 chars"
-        # expression: "document.summary.size() < 100"
-        # Example (Equality):
-        # title: "Requestor is owner"
-        # description: "Determines if requestor is the document owner"
-        # expression: "document.owner == request.auth.claims.email"
-        # Example (Logic):
-        # title: "Public documents"
-        # description: "Determine whether the document should be publicly visible"
-        # expression: "document.type != 'private' && document.type != 'internal'"
-        # Example (Data Manipulation):
-        # title: "Notification string"
-        # description: "Create a notification string with a timestamp."
-        # expression: "'New message received at ' + string(document.create_time)"
-        # The exact variables and functions that may be referenced within an expression
-        # are determined by the service that evaluates it. See the service
-        # documentation for additional information.
+        # Represents a textual expression in the Common Expression Language (CEL) syntax.
+        # CEL is a C-like expression language. The syntax and semantics of CEL are
+        # documented at https://github.com/google/cel-spec. Example (Comparison): title:
+        # "Summary size limit" description: "Determines if a summary is less than 100
+        # chars" expression: "document.summary.size() < 100" Example (Equality): title: "
+        # Requestor is owner" description: "Determines if requestor is the document
+        # owner" expression: "document.owner == request.auth.claims.email" Example (
+        # Logic): title: "Public documents" description: "Determine whether the document
+        # should be publicly visible" expression: "document.type != 'private' &&
+        # document.type != 'internal'" Example (Data Manipulation): title: "Notification
+        # string" description: "Create a notification string with a timestamp."
+        # expression: "'New message received at ' + string(document.create_time)" The
+        # exact variables and functions that may be referenced within an expression are
+        # determined by the service that evaluates it. See the service documentation for
+        # additional information.
         # Corresponds to the JSON property `condition`
         # @return [Google::Apis::SecuritycenterV1::Expr]
         attr_accessor :condition
       
-        # Specifies the identities requesting access for a Cloud Platform resource.
-        # `members` can have the following values:
-        # * `allUsers`: A special identifier that represents anyone who is
-        # on the internet; with or without a Google account.
-        # * `allAuthenticatedUsers`: A special identifier that represents anyone
-        # who is authenticated with a Google account or a service account.
-        # * `user:`emailid``: An email address that represents a specific Google
-        # account. For example, `alice@example.com` .
-        # * `serviceAccount:`emailid``: An email address that represents a service
-        # account. For example, `my-other-app@appspot.gserviceaccount.com`.
-        # * `group:`emailid``: An email address that represents a Google group.
-        # For example, `admins@example.com`.
-        # * `deleted:user:`emailid`?uid=`uniqueid``: An email address (plus unique
-        # identifier) representing a user that has been recently deleted. For
-        # example, `alice@example.com?uid=123456789012345678901`. If the user is
-        # recovered, this value reverts to `user:`emailid`` and the recovered user
-        # retains the role in the binding.
-        # * `deleted:serviceAccount:`emailid`?uid=`uniqueid``: An email address (plus
-        # unique identifier) representing a service account that has been recently
-        # deleted. For example,
-        # `my-other-app@appspot.gserviceaccount.com?uid=123456789012345678901`.
-        # If the service account is undeleted, this value reverts to
-        # `serviceAccount:`emailid`` and the undeleted service account retains the
-        # role in the binding.
-        # * `deleted:group:`emailid`?uid=`uniqueid``: An email address (plus unique
-        # identifier) representing a Google group that has been recently
-        # deleted. For example, `admins@example.com?uid=123456789012345678901`. If
-        # the group is recovered, this value reverts to `group:`emailid`` and the
-        # recovered group retains the role in the binding.
-        # * `domain:`domain``: The G Suite domain (primary) that represents all the
-        # users of that domain. For example, `google.com` or `example.com`.
+        # Specifies the identities requesting access for a Cloud Platform resource. `
+        # members` can have the following values: * `allUsers`: A special identifier
+        # that represents anyone who is on the internet; with or without a Google
+        # account. * `allAuthenticatedUsers`: A special identifier that represents
+        # anyone who is authenticated with a Google account or a service account. * `
+        # user:`emailid``: An email address that represents a specific Google account.
+        # For example, `alice@example.com` . * `serviceAccount:`emailid``: An email
+        # address that represents a service account. For example, `my-other-app@appspot.
+        # gserviceaccount.com`. * `group:`emailid``: An email address that represents a
+        # Google group. For example, `admins@example.com`. * `deleted:user:`emailid`?uid=
+        # `uniqueid``: An email address (plus unique identifier) representing a user
+        # that has been recently deleted. For example, `alice@example.com?uid=
+        # 123456789012345678901`. If the user is recovered, this value reverts to `user:`
+        # emailid`` and the recovered user retains the role in the binding. * `deleted:
+        # serviceAccount:`emailid`?uid=`uniqueid``: An email address (plus unique
+        # identifier) representing a service account that has been recently deleted. For
+        # example, `my-other-app@appspot.gserviceaccount.com?uid=123456789012345678901`.
+        # If the service account is undeleted, this value reverts to `serviceAccount:`
+        # emailid`` and the undeleted service account retains the role in the binding. *
+        # `deleted:group:`emailid`?uid=`uniqueid``: An email address (plus unique
+        # identifier) representing a Google group that has been recently deleted. For
+        # example, `admins@example.com?uid=123456789012345678901`. If the group is
+        # recovered, this value reverts to `group:`emailid`` and the recovered group
+        # retains the role in the binding. * `domain:`domain``: The G Suite domain (
+        # primary) that represents all the users of that domain. For example, `google.
+        # com` or `example.com`.
         # Corresponds to the JSON property `members`
         # @return [Array<String>]
         attr_accessor :members
       
-        # Role that is assigned to `members`.
-        # For example, `roles/viewer`, `roles/editor`, or `roles/owner`.
+        # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`
+        # , or `roles/owner`.
         # Corresponds to the JSON property `role`
         # @return [String]
         attr_accessor :role
@@ -318,13 +258,11 @@ module Google
         end
       end
       
-      # A generic empty message that you can re-use to avoid defining duplicated
-      # empty messages in your APIs. A typical example is to use it as the request
-      # or the response type of an API method. For instance:
-      # service Foo `
-      # rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty);
-      # `
-      # The JSON representation for `Empty` is empty JSON object ````.
+      # A generic empty message that you can re-use to avoid defining duplicated empty
+      # messages in your APIs. A typical example is to use it as the request or the
+      # response type of an API method. For instance: service Foo ` rpc Bar(google.
+      # protobuf.Empty) returns (google.protobuf.Empty); ` The JSON representation for
+      # `Empty` is empty JSON object ````.
       class Empty
         include Google::Apis::Core::Hashable
       
@@ -337,52 +275,43 @@ module Google
         end
       end
       
-      # Represents a textual expression in the Common Expression Language (CEL)
-      # syntax. CEL is a C-like expression language. The syntax and semantics of CEL
-      # are documented at https://github.com/google/cel-spec.
-      # Example (Comparison):
-      # title: "Summary size limit"
-      # description: "Determines if a summary is less than 100 chars"
-      # expression: "document.summary.size() < 100"
-      # Example (Equality):
-      # title: "Requestor is owner"
-      # description: "Determines if requestor is the document owner"
-      # expression: "document.owner == request.auth.claims.email"
-      # Example (Logic):
-      # title: "Public documents"
-      # description: "Determine whether the document should be publicly visible"
-      # expression: "document.type != 'private' && document.type != 'internal'"
-      # Example (Data Manipulation):
-      # title: "Notification string"
-      # description: "Create a notification string with a timestamp."
-      # expression: "'New message received at ' + string(document.create_time)"
-      # The exact variables and functions that may be referenced within an expression
-      # are determined by the service that evaluates it. See the service
-      # documentation for additional information.
+      # Represents a textual expression in the Common Expression Language (CEL) syntax.
+      # CEL is a C-like expression language. The syntax and semantics of CEL are
+      # documented at https://github.com/google/cel-spec. Example (Comparison): title:
+      # "Summary size limit" description: "Determines if a summary is less than 100
+      # chars" expression: "document.summary.size() < 100" Example (Equality): title: "
+      # Requestor is owner" description: "Determines if requestor is the document
+      # owner" expression: "document.owner == request.auth.claims.email" Example (
+      # Logic): title: "Public documents" description: "Determine whether the document
+      # should be publicly visible" expression: "document.type != 'private' &&
+      # document.type != 'internal'" Example (Data Manipulation): title: "Notification
+      # string" description: "Create a notification string with a timestamp."
+      # expression: "'New message received at ' + string(document.create_time)" The
+      # exact variables and functions that may be referenced within an expression are
+      # determined by the service that evaluates it. See the service documentation for
+      # additional information.
       class Expr
         include Google::Apis::Core::Hashable
       
-        # Optional. Description of the expression. This is a longer text which
-        # describes the expression, e.g. when hovered over it in a UI.
+        # Optional. Description of the expression. This is a longer text which describes
+        # the expression, e.g. when hovered over it in a UI.
         # Corresponds to the JSON property `description`
         # @return [String]
         attr_accessor :description
       
-        # Textual representation of an expression in Common Expression Language
-        # syntax.
+        # Textual representation of an expression in Common Expression Language syntax.
         # Corresponds to the JSON property `expression`
         # @return [String]
         attr_accessor :expression
       
-        # Optional. String indicating the location of the expression for error
-        # reporting, e.g. a file name and a position in the file.
+        # Optional. String indicating the location of the expression for error reporting,
+        # e.g. a file name and a position in the file.
         # Corresponds to the JSON property `location`
         # @return [String]
         attr_accessor :location
       
-        # Optional. Title for the expression, i.e. a short string describing
-        # its purpose. This can be used e.g. in UIs which allow to enter the
-        # expression.
+        # Optional. Title for the expression, i.e. a short string describing its purpose.
+        # This can be used e.g. in UIs which allow to enter the expression.
         # Corresponds to the JSON property `title`
         # @return [String]
         attr_accessor :title
@@ -400,18 +329,16 @@ module Google
         end
       end
       
-      # Security Command Center finding.
-      # A finding is a record of assessment data like security, risk, health, or
-      # privacy, that is ingested into Security Command Center for presentation,
-      # notification, analysis, policy testing, and enforcement. For example, a
-      # cross-site scripting (XSS) vulnerability in an App Engine application is a
-      # finding.
+      # Security Command Center finding. A finding is a record of assessment data like
+      # security, risk, health, or privacy, that is ingested into Security Command
+      # Center for presentation, notification, analysis, policy testing, and
+      # enforcement. For example, a cross-site scripting (XSS) vulnerability in an App
+      # Engine application is a finding.
       class Finding
         include Google::Apis::Core::Hashable
       
-        # The additional taxonomy group within findings from a given source.
-        # This field is immutable after creation time.
-        # Example: "XSS_FLASH_INJECTION"
+        # The additional taxonomy group within findings from a given source. This field
+        # is immutable after creation time. Example: "XSS_FLASH_INJECTION"
         # Corresponds to the JSON property `category`
         # @return [String]
         attr_accessor :category
@@ -421,59 +348,56 @@ module Google
         # @return [String]
         attr_accessor :create_time
       
-        # The time at which the event took place. For example, if the finding
-        # represents an open firewall it would capture the time the detector believes
-        # the firewall became open. The accuracy is determined by the detector.
+        # The time at which the event took place. For example, if the finding represents
+        # an open firewall it would capture the time the detector believes the firewall
+        # became open. The accuracy is determined by the detector.
         # Corresponds to the JSON property `eventTime`
         # @return [String]
         attr_accessor :event_time
       
-        # The URI that, if available, points to a web page outside of Security
-        # Command Center where additional information about the finding can be found.
-        # This field is guaranteed to be either empty or a well formed URL.
+        # The URI that, if available, points to a web page outside of Security Command
+        # Center where additional information about the finding can be found. This field
+        # is guaranteed to be either empty or a well formed URL.
         # Corresponds to the JSON property `externalUri`
         # @return [String]
         attr_accessor :external_uri
       
-        # The relative resource name of this finding. See:
-        # https://cloud.google.com/apis/design/resource_names#relative_resource_name
-        # Example:
-        # "organizations/`organization_id`/sources/`source_id`/findings/`finding_id`"
+        # The relative resource name of this finding. See: https://cloud.google.com/apis/
+        # design/resource_names#relative_resource_name Example: "organizations/`
+        # organization_id`/sources/`source_id`/findings/`finding_id`"
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
       
-        # The relative resource name of the source the finding belongs to. See:
-        # https://cloud.google.com/apis/design/resource_names#relative_resource_name
-        # This field is immutable after creation time.
-        # For example:
-        # "organizations/`organization_id`/sources/`source_id`"
+        # The relative resource name of the source the finding belongs to. See: https://
+        # cloud.google.com/apis/design/resource_names#relative_resource_name This field
+        # is immutable after creation time. For example: "organizations/`organization_id`
+        # /sources/`source_id`"
         # Corresponds to the JSON property `parent`
         # @return [String]
         attr_accessor :parent
       
-        # For findings on Google Cloud resources, the full resource
-        # name of the Google Cloud resource this finding is for. See:
-        # https://cloud.google.com/apis/design/resource_names#full_resource_name
-        # When the finding is for a non-Google Cloud resource, the resourceName can
-        # be a customer or partner defined string. This field is immutable after
-        # creation time.
+        # For findings on Google Cloud resources, the full resource name of the Google
+        # Cloud resource this finding is for. See: https://cloud.google.com/apis/design/
+        # resource_names#full_resource_name When the finding is for a non-Google Cloud
+        # resource, the resourceName can be a customer or partner defined string. This
+        # field is immutable after creation time.
         # Corresponds to the JSON property `resourceName`
         # @return [String]
         attr_accessor :resource_name
       
-        # User specified security marks that are attached to the parent Security
-        # Command Center resource. Security marks are scoped within a Security Command
-        # Center organization -- they can be modified and viewed by all users who have
-        # proper permissions on the organization.
+        # User specified security marks that are attached to the parent Security Command
+        # Center resource. Security marks are scoped within a Security Command Center
+        # organization -- they can be modified and viewed by all users who have proper
+        # permissions on the organization.
         # Corresponds to the JSON property `securityMarks`
         # @return [Google::Apis::SecuritycenterV1::SecurityMarks]
         attr_accessor :security_marks
       
-        # Source specific properties. These properties are managed by the source
-        # that writes the finding. The key names in the source_properties map must be
-        # between 1 and 255 characters, and must start with a letter and contain
-        # alphanumeric characters or underscores only.
+        # Source specific properties. These properties are managed by the source that
+        # writes the finding. The key names in the source_properties map must be between
+        # 1 and 255 characters, and must start with a letter and contain alphanumeric
+        # characters or underscores only.
         # Corresponds to the JSON property `sourceProperties`
         # @return [Hash<String,Object>]
         attr_accessor :source_properties
@@ -525,15 +449,13 @@ module Google
       class GetPolicyOptions
         include Google::Apis::Core::Hashable
       
-        # Optional. The policy format version to be returned.
-        # Valid values are 0, 1, and 3. Requests specifying an invalid value will be
-        # rejected.
-        # Requests for policies with any conditional bindings must specify version 3.
-        # Policies without any conditional bindings may specify any valid value or
-        # leave the field unset.
-        # To learn which resources support conditions in their IAM policies, see the
-        # [IAM
-        # documentation](https://cloud.google.com/iam/help/conditions/resource-policies).
+        # Optional. The policy format version to be returned. Valid values are 0, 1, and
+        # 3. Requests specifying an invalid value will be rejected. Requests for
+        # policies with any conditional bindings must specify version 3. Policies
+        # without any conditional bindings may specify any valid value or leave the
+        # field unset. To learn which resources support conditions in their IAM policies,
+        # see the [IAM documentation](https://cloud.google.com/iam/help/conditions/
+        # resource-policies).
         # Corresponds to the JSON property `requestedPolicyVersion`
         # @return [Fixnum]
         attr_accessor :requested_policy_version
@@ -552,12 +474,11 @@ module Google
       class GoogleCloudSecuritycenterV1NotificationMessage
         include Google::Apis::Core::Hashable
       
-        # Security Command Center finding.
-        # A finding is a record of assessment data like security, risk, health, or
-        # privacy, that is ingested into Security Command Center for presentation,
-        # notification, analysis, policy testing, and enforcement. For example, a
-        # cross-site scripting (XSS) vulnerability in an App Engine application is a
-        # finding.
+        # Security Command Center finding. A finding is a record of assessment data like
+        # security, risk, health, or privacy, that is ingested into Security Command
+        # Center for presentation, notification, analysis, policy testing, and
+        # enforcement. For example, a cross-site scripting (XSS) vulnerability in an App
+        # Engine application is a finding.
         # Corresponds to the JSON property `finding`
         # @return [Google::Apis::SecuritycenterV1::Finding]
         attr_accessor :finding
@@ -588,8 +509,8 @@ module Google
       class GoogleCloudSecuritycenterV1Resource
         include Google::Apis::Core::Hashable
       
-        # The full resource name of the resource. See:
-        # https://cloud.google.com/apis/design/resource_names#full_resource_name
+        # The full resource name of the resource. See: https://cloud.google.com/apis/
+        # design/resource_names#full_resource_name
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
@@ -678,12 +599,11 @@ module Google
         end
       end
       
-      # Security Command Center representation of a Google Cloud
-      # resource.
-      # The Asset is a Security Command Center resource that captures information
-      # about a single Google Cloud resource. All modifications to an Asset are only
-      # within the context of Security Command Center and don't affect the referenced
-      # Google Cloud resource.
+      # Security Command Center representation of a Google Cloud resource. The Asset
+      # is a Security Command Center resource that captures information about a single
+      # Google Cloud resource. All modifications to an Asset are only within the
+      # context of Security Command Center and don't affect the referenced Google
+      # Cloud resource.
       class GoogleCloudSecuritycenterV1p1beta1Asset
         include Google::Apis::Core::Hashable
       
@@ -694,22 +614,20 @@ module Google
       
         # Cloud IAM Policy information associated with the Google Cloud resource
         # described by the Security Command Center asset. This information is managed
-        # and defined by the Google Cloud resource and cannot be modified by the
-        # user.
+        # and defined by the Google Cloud resource and cannot be modified by the user.
         # Corresponds to the JSON property `iamPolicy`
         # @return [Google::Apis::SecuritycenterV1::GoogleCloudSecuritycenterV1p1beta1IamPolicy]
         attr_accessor :iam_policy
       
-        # The relative resource name of this asset. See:
-        # https://cloud.google.com/apis/design/resource_names#relative_resource_name
-        # Example:
-        # "organizations/`organization_id`/assets/`asset_id`".
+        # The relative resource name of this asset. See: https://cloud.google.com/apis/
+        # design/resource_names#relative_resource_name Example: "organizations/`
+        # organization_id`/assets/`asset_id`".
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
       
-        # Resource managed properties. These properties are managed and defined by
-        # the Google Cloud resource and cannot be modified by the user.
+        # Resource managed properties. These properties are managed and defined by the
+        # Google Cloud resource and cannot be modified by the user.
         # Corresponds to the JSON property `resourceProperties`
         # @return [Hash<String,Object>]
         attr_accessor :resource_properties
@@ -720,16 +638,15 @@ module Google
         # @return [Google::Apis::SecuritycenterV1::GoogleCloudSecuritycenterV1p1beta1SecurityCenterProperties]
         attr_accessor :security_center_properties
       
-        # User specified security marks that are attached to the parent Security
-        # Command Center resource. Security marks are scoped within a Security Command
-        # Center organization -- they can be modified and viewed by all users who have
-        # proper permissions on the organization.
+        # User specified security marks that are attached to the parent Security Command
+        # Center resource. Security marks are scoped within a Security Command Center
+        # organization -- they can be modified and viewed by all users who have proper
+        # permissions on the organization.
         # Corresponds to the JSON property `securityMarks`
         # @return [Google::Apis::SecuritycenterV1::GoogleCloudSecuritycenterV1p1beta1SecurityMarks]
         attr_accessor :security_marks
       
-        # The time at which the asset was last updated, added, or deleted in Cloud
-        # SCC.
+        # The time at which the asset was last updated, added, or deleted in Cloud SCC.
         # Corresponds to the JSON property `updateTime`
         # @return [String]
         attr_accessor :update_time
@@ -750,17 +667,15 @@ module Google
         end
       end
       
-      # Security Command Center finding.
-      # A finding is a record of assessment data (security, risk, health or privacy)
-      # ingested into Security Command Center for presentation, notification,
-      # analysis, policy testing, and enforcement. For example, an XSS vulnerability
-      # in an App Engine application is a finding.
+      # Security Command Center finding. A finding is a record of assessment data (
+      # security, risk, health or privacy) ingested into Security Command Center for
+      # presentation, notification, analysis, policy testing, and enforcement. For
+      # example, an XSS vulnerability in an App Engine application is a finding.
       class GoogleCloudSecuritycenterV1p1beta1Finding
         include Google::Apis::Core::Hashable
       
-        # The additional taxonomy group within findings from a given source.
-        # This field is immutable after creation time.
-        # Example: "XSS_FLASH_INJECTION"
+        # The additional taxonomy group within findings from a given source. This field
+        # is immutable after creation time. Example: "XSS_FLASH_INJECTION"
         # Corresponds to the JSON property `category`
         # @return [String]
         attr_accessor :category
@@ -770,59 +685,56 @@ module Google
         # @return [String]
         attr_accessor :create_time
       
-        # The time at which the event took place. For example, if the finding
-        # represents an open firewall it would capture the time the detector believes
-        # the firewall became open. The accuracy is determined by the detector.
+        # The time at which the event took place. For example, if the finding represents
+        # an open firewall it would capture the time the detector believes the firewall
+        # became open. The accuracy is determined by the detector.
         # Corresponds to the JSON property `eventTime`
         # @return [String]
         attr_accessor :event_time
       
-        # The URI that, if available, points to a web page outside of Security
-        # Command Center where additional information about the finding can be found.
-        # This field is guaranteed to be either empty or a well formed URL.
+        # The URI that, if available, points to a web page outside of Security Command
+        # Center where additional information about the finding can be found. This field
+        # is guaranteed to be either empty or a well formed URL.
         # Corresponds to the JSON property `externalUri`
         # @return [String]
         attr_accessor :external_uri
       
-        # The relative resource name of this finding. See:
-        # https://cloud.google.com/apis/design/resource_names#relative_resource_name
-        # Example:
-        # "organizations/`organization_id`/sources/`source_id`/findings/`finding_id`"
+        # The relative resource name of this finding. See: https://cloud.google.com/apis/
+        # design/resource_names#relative_resource_name Example: "organizations/`
+        # organization_id`/sources/`source_id`/findings/`finding_id`"
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
       
-        # The relative resource name of the source the finding belongs to. See:
-        # https://cloud.google.com/apis/design/resource_names#relative_resource_name
-        # This field is immutable after creation time.
-        # For example:
-        # "organizations/`organization_id`/sources/`source_id`"
+        # The relative resource name of the source the finding belongs to. See: https://
+        # cloud.google.com/apis/design/resource_names#relative_resource_name This field
+        # is immutable after creation time. For example: "organizations/`organization_id`
+        # /sources/`source_id`"
         # Corresponds to the JSON property `parent`
         # @return [String]
         attr_accessor :parent
       
-        # For findings on Google Cloud resources, the full resource
-        # name of the Google Cloud resource this finding is for. See:
-        # https://cloud.google.com/apis/design/resource_names#full_resource_name
-        # When the finding is for a non-Google Cloud resource, the resourceName can
-        # be a customer or partner defined string. This field is immutable after
-        # creation time.
+        # For findings on Google Cloud resources, the full resource name of the Google
+        # Cloud resource this finding is for. See: https://cloud.google.com/apis/design/
+        # resource_names#full_resource_name When the finding is for a non-Google Cloud
+        # resource, the resourceName can be a customer or partner defined string. This
+        # field is immutable after creation time.
         # Corresponds to the JSON property `resourceName`
         # @return [String]
         attr_accessor :resource_name
       
-        # User specified security marks that are attached to the parent Security
-        # Command Center resource. Security marks are scoped within a Security Command
-        # Center organization -- they can be modified and viewed by all users who have
-        # proper permissions on the organization.
+        # User specified security marks that are attached to the parent Security Command
+        # Center resource. Security marks are scoped within a Security Command Center
+        # organization -- they can be modified and viewed by all users who have proper
+        # permissions on the organization.
         # Corresponds to the JSON property `securityMarks`
         # @return [Google::Apis::SecuritycenterV1::GoogleCloudSecuritycenterV1p1beta1SecurityMarks]
         attr_accessor :security_marks
       
-        # Source specific properties. These properties are managed by the source
-        # that writes the finding. The key names in the source_properties map must be
-        # between 1 and 255 characters, and must start with a letter and contain
-        # alphanumeric characters or underscores only.
+        # Source specific properties. These properties are managed by the source that
+        # writes the finding. The key names in the source_properties map must be between
+        # 1 and 255 characters, and must start with a letter and contain alphanumeric
+        # characters or underscores only.
         # Corresponds to the JSON property `sourceProperties`
         # @return [Hash<String,Object>]
         attr_accessor :source_properties
@@ -853,14 +765,12 @@ module Google
       
       # Cloud IAM Policy information associated with the Google Cloud resource
       # described by the Security Command Center asset. This information is managed
-      # and defined by the Google Cloud resource and cannot be modified by the
-      # user.
+      # and defined by the Google Cloud resource and cannot be modified by the user.
       class GoogleCloudSecuritycenterV1p1beta1IamPolicy
         include Google::Apis::Core::Hashable
       
-        # The JSON representation of the Policy associated with the asset.
-        # See https://cloud.google.com/iam/docs/reference/rest/v1/Policy for
-        # format details.
+        # The JSON representation of the Policy associated with the asset. See https://
+        # cloud.google.com/iam/docs/reference/rest/v1/Policy for format details.
         # Corresponds to the JSON property `policyBlob`
         # @return [String]
         attr_accessor :policy_blob
@@ -879,11 +789,10 @@ module Google
       class GoogleCloudSecuritycenterV1p1beta1NotificationMessage
         include Google::Apis::Core::Hashable
       
-        # Security Command Center finding.
-        # A finding is a record of assessment data (security, risk, health or privacy)
-        # ingested into Security Command Center for presentation, notification,
-        # analysis, policy testing, and enforcement. For example, an XSS vulnerability
-        # in an App Engine application is a finding.
+        # Security Command Center finding. A finding is a record of assessment data (
+        # security, risk, health or privacy) ingested into Security Command Center for
+        # presentation, notification, analysis, policy testing, and enforcement. For
+        # example, an XSS vulnerability in an App Engine application is a finding.
         # Corresponds to the JSON property `finding`
         # @return [Google::Apis::SecuritycenterV1::GoogleCloudSecuritycenterV1p1beta1Finding]
         attr_accessor :finding
@@ -898,8 +807,8 @@ module Google
         # @return [Google::Apis::SecuritycenterV1::GoogleCloudSecuritycenterV1p1beta1Resource]
         attr_accessor :resource
       
-        # Wrapper over asset object that also captures the state change for the asset
-        # e.g. if it was a newly created asset vs updated or deleted asset.
+        # Wrapper over asset object that also captures the state change for the asset e.
+        # g. if it was a newly created asset vs updated or deleted asset.
         # Corresponds to the JSON property `temporalAsset`
         # @return [Google::Apis::SecuritycenterV1::GoogleCloudSecuritycenterV1p1beta1TemporalAsset]
         attr_accessor :temporal_asset
@@ -921,8 +830,8 @@ module Google
       class GoogleCloudSecuritycenterV1p1beta1Resource
         include Google::Apis::Core::Hashable
       
-        # The full resource name of the resource. See:
-        # https://cloud.google.com/apis/design/resource_names#full_resource_name
+        # The full resource name of the resource. See: https://cloud.google.com/apis/
+        # design/resource_names#full_resource_name
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
@@ -996,9 +905,9 @@ module Google
         # @return [String]
         attr_accessor :resource_display_name
       
-        # The full resource name of the Google Cloud resource this asset
-        # represents. This field is immutable after create time. See:
-        # https://cloud.google.com/apis/design/resource_names#full_resource_name
+        # The full resource name of the Google Cloud resource this asset represents.
+        # This field is immutable after create time. See: https://cloud.google.com/apis/
+        # design/resource_names#full_resource_name
         # Corresponds to the JSON property `resourceName`
         # @return [String]
         attr_accessor :resource_name
@@ -1008,8 +917,8 @@ module Google
         # @return [Array<String>]
         attr_accessor :resource_owners
       
-        # The full resource name of the immediate parent of the resource. See:
-        # https://cloud.google.com/apis/design/resource_names#full_resource_name
+        # The full resource name of the immediate parent of the resource. See: https://
+        # cloud.google.com/apis/design/resource_names#full_resource_name
         # Corresponds to the JSON property `resourceParent`
         # @return [String]
         attr_accessor :resource_parent
@@ -1019,8 +928,8 @@ module Google
         # @return [String]
         attr_accessor :resource_parent_display_name
       
-        # The full resource name of the project the resource belongs to. See:
-        # https://cloud.google.com/apis/design/resource_names#full_resource_name
+        # The full resource name of the project the resource belongs to. See: https://
+        # cloud.google.com/apis/design/resource_names#full_resource_name
         # Corresponds to the JSON property `resourceProject`
         # @return [String]
         attr_accessor :resource_project
@@ -1030,10 +939,9 @@ module Google
         # @return [String]
         attr_accessor :resource_project_display_name
       
-        # The type of the Google Cloud resource. Examples include: APPLICATION,
-        # PROJECT, and ORGANIZATION. This is a case insensitive field defined by
-        # Security Command Center and/or the producer of the resource and is
-        # immutable after create time.
+        # The type of the Google Cloud resource. Examples include: APPLICATION, PROJECT,
+        # and ORGANIZATION. This is a case insensitive field defined by Security Command
+        # Center and/or the producer of the resource and is immutable after create time.
         # Corresponds to the JSON property `resourceType`
         # @return [String]
         attr_accessor :resource_type
@@ -1055,30 +963,26 @@ module Google
         end
       end
       
-      # User specified security marks that are attached to the parent Security
-      # Command Center resource. Security marks are scoped within a Security Command
-      # Center organization -- they can be modified and viewed by all users who have
-      # proper permissions on the organization.
+      # User specified security marks that are attached to the parent Security Command
+      # Center resource. Security marks are scoped within a Security Command Center
+      # organization -- they can be modified and viewed by all users who have proper
+      # permissions on the organization.
       class GoogleCloudSecuritycenterV1p1beta1SecurityMarks
         include Google::Apis::Core::Hashable
       
         # Mutable user specified security marks belonging to the parent resource.
-        # Constraints are as follows:
-        # * Keys and values are treated as case insensitive
-        # * Keys must be between 1 - 256 characters (inclusive)
-        # * Keys must be letters, numbers, underscores, or dashes
-        # * Values have leading and trailing whitespace trimmed, remaining
-        # characters must be between 1 - 4096 characters (inclusive)
+        # Constraints are as follows: * Keys and values are treated as case insensitive *
+        # Keys must be between 1 - 256 characters (inclusive) * Keys must be letters,
+        # numbers, underscores, or dashes * Values have leading and trailing whitespace
+        # trimmed, remaining characters must be between 1 - 4096 characters (inclusive)
         # Corresponds to the JSON property `marks`
         # @return [Hash<String,String>]
         attr_accessor :marks
       
-        # The relative resource name of the SecurityMarks. See:
-        # https://cloud.google.com/apis/design/resource_names#relative_resource_name
-        # Examples:
-        # "organizations/`organization_id`/assets/`asset_id`/securityMarks"
-        # "organizations/`organization_id`/sources/`source_id`/findings/`finding_id`/
-        # securityMarks".
+        # The relative resource name of the SecurityMarks. See: https://cloud.google.com/
+        # apis/design/resource_names#relative_resource_name Examples: "organizations/`
+        # organization_id`/assets/`asset_id`/securityMarks" "organizations/`
+        # organization_id`/sources/`source_id`/findings/`finding_id`/securityMarks".
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
@@ -1094,17 +998,16 @@ module Google
         end
       end
       
-      # Wrapper over asset object that also captures the state change for the asset
-      # e.g. if it was a newly created asset vs updated or deleted asset.
+      # Wrapper over asset object that also captures the state change for the asset e.
+      # g. if it was a newly created asset vs updated or deleted asset.
       class GoogleCloudSecuritycenterV1p1beta1TemporalAsset
         include Google::Apis::Core::Hashable
       
-        # Security Command Center representation of a Google Cloud
-        # resource.
-        # The Asset is a Security Command Center resource that captures information
-        # about a single Google Cloud resource. All modifications to an Asset are only
-        # within the context of Security Command Center and don't affect the referenced
-        # Google Cloud resource.
+        # Security Command Center representation of a Google Cloud resource. The Asset
+        # is a Security Command Center resource that captures information about a single
+        # Google Cloud resource. All modifications to an Asset are only within the
+        # context of Security Command Center and don't affect the referenced Google
+        # Cloud resource.
         # Corresponds to the JSON property `asset`
         # @return [Google::Apis::SecuritycenterV1::GoogleCloudSecuritycenterV1p1beta1Asset]
         attr_accessor :asset
@@ -1130,119 +1033,93 @@ module Google
         include Google::Apis::Core::Hashable
       
         # When compare_duration is set, the GroupResult's "state_change" property is
-        # updated to indicate whether the asset was added, removed, or remained
-        # present during the compare_duration period of time that precedes the
-        # read_time. This is the time between (read_time - compare_duration) and
-        # read_time.
-        # The state change value is derived based on the presence of the asset at the
-        # two points in time. Intermediate state changes between the two times don't
-        # affect the result. For example, the results aren't affected if the asset is
-        # removed and re-created again.
-        # Possible "state_change" values when compare_duration is specified:
-        # * "ADDED":   indicates that the asset was not present at the start of
-        # compare_duration, but present at reference_time.
-        # * "REMOVED": indicates that the asset was present at the start of
-        # compare_duration, but not present at reference_time.
-        # * "ACTIVE":  indicates that the asset was present at both the
-        # start and the end of the time period defined by
-        # compare_duration and reference_time.
-        # If compare_duration is not specified, then the only possible state_change
-        # is "UNUSED", which will be the state_change set for all assets present at
-        # read_time.
-        # If this field is set then `state_change` must be a specified field in
-        # `group_by`.
+        # updated to indicate whether the asset was added, removed, or remained present
+        # during the compare_duration period of time that precedes the read_time. This
+        # is the time between (read_time - compare_duration) and read_time. The state
+        # change value is derived based on the presence of the asset at the two points
+        # in time. Intermediate state changes between the two times don't affect the
+        # result. For example, the results aren't affected if the asset is removed and
+        # re-created again. Possible "state_change" values when compare_duration is
+        # specified: * "ADDED": indicates that the asset was not present at the start of
+        # compare_duration, but present at reference_time. * "REMOVED": indicates that
+        # the asset was present at the start of compare_duration, but not present at
+        # reference_time. * "ACTIVE": indicates that the asset was present at both the
+        # start and the end of the time period defined by compare_duration and
+        # reference_time. If compare_duration is not specified, then the only possible
+        # state_change is "UNUSED", which will be the state_change set for all assets
+        # present at read_time. If this field is set then `state_change` must be a
+        # specified field in `group_by`.
         # Corresponds to the JSON property `compareDuration`
         # @return [String]
         attr_accessor :compare_duration
       
-        # Expression that defines the filter to apply across assets.
-        # The expression is a list of zero or more restrictions combined via logical
-        # operators `AND` and `OR`.
-        # Parentheses are supported, and `OR` has higher precedence than `AND`.
-        # Restrictions have the form `<field> <operator> <value>` and may have a `-`
-        # character in front of them to indicate negation. The fields map to those
-        # defined in the Asset resource. Examples include:
-        # * name
-        # * security_center_properties.resource_name
-        # * resource_properties.a_property
-        # * security_marks.marks.marka
-        # The supported operators are:
-        # * `=` for all value types.
-        # * `>`, `<`, `>=`, `<=` for integer values.
-        # * `:`, meaning substring matching, for strings.
-        # The supported value types are:
-        # * string literals in quotes.
-        # * integer literals without quotes.
-        # * boolean literals `true` and `false` without quotes.
-        # The following field and operator combinations are supported:
-        # * name: `=`
-        # * update_time: `=`, `>`, `<`, `>=`, `<=`
-        # Usage: This should be milliseconds since epoch or an RFC3339 string.
-        # Examples:
-        # `update_time = "2019-06-10T16:07:18-07:00"`
-        # `update_time = 1560208038000`
-        # * create_time: `=`, `>`, `<`, `>=`, `<=`
-        # Usage: This should be milliseconds since epoch or an RFC3339 string.
-        # Examples:
-        # `create_time = "2019-06-10T16:07:18-07:00"`
-        # `create_time = 1560208038000`
-        # * iam_policy.policy_blob: `=`, `:`
-        # * resource_properties: `=`, `:`, `>`, `<`, `>=`, `<=`
-        # * security_marks.marks: `=`, `:`
-        # * security_center_properties.resource_name: `=`, `:`
-        # * security_center_properties.resource_display_name: `=`, `:`
-        # * security_center_properties.resource_type: `=`, `:`
-        # * security_center_properties.resource_parent: `=`, `:`
-        # * security_center_properties.resource_parent_display_name: `=`, `:`
-        # * security_center_properties.resource_project: `=`, `:`
-        # * security_center_properties.resource_project_display_name: `=`, `:`
-        # * security_center_properties.resource_owners: `=`, `:`
-        # For example, `resource_properties.size = 100` is a valid filter string.
-        # Use a partial match on the empty string to filter based on a property
-        # existing: `resource_properties.my_property : ""`
-        # Use a negated partial match on the empty string to filter based on a
-        # property not existing: `-resource_properties.my_property : ""`
+        # Expression that defines the filter to apply across assets. The expression is a
+        # list of zero or more restrictions combined via logical operators `AND` and `OR`
+        # . Parentheses are supported, and `OR` has higher precedence than `AND`.
+        # Restrictions have the form ` ` and may have a `-` character in front of them
+        # to indicate negation. The fields map to those defined in the Asset resource.
+        # Examples include: * name * security_center_properties.resource_name *
+        # resource_properties.a_property * security_marks.marks.marka The supported
+        # operators are: * `=` for all value types. * `>`, `<`, `>=`, `<=` for integer
+        # values. * `:`, meaning substring matching, for strings. The supported value
+        # types are: * string literals in quotes. * integer literals without quotes. *
+        # boolean literals `true` and `false` without quotes. The following field and
+        # operator combinations are supported: * name: `=` * update_time: `=`, `>`, `<`,
+        # `>=`, `<=` Usage: This should be milliseconds since epoch or an RFC3339 string.
+        # Examples: `update_time = "2019-06-10T16:07:18-07:00"` `update_time =
+        # 1560208038000` * create_time: `=`, `>`, `<`, `>=`, `<=` Usage: This should be
+        # milliseconds since epoch or an RFC3339 string. Examples: `create_time = "2019-
+        # 06-10T16:07:18-07:00"` `create_time = 1560208038000` * iam_policy.policy_blob:
+        # `=`, `:` * resource_properties: `=`, `:`, `>`, `<`, `>=`, `<=` *
+        # security_marks.marks: `=`, `:` * security_center_properties.resource_name: `=`,
+        # `:` * security_center_properties.resource_display_name: `=`, `:` *
+        # security_center_properties.resource_type: `=`, `:` *
+        # security_center_properties.resource_parent: `=`, `:` *
+        # security_center_properties.resource_parent_display_name: `=`, `:` *
+        # security_center_properties.resource_project: `=`, `:` *
+        # security_center_properties.resource_project_display_name: `=`, `:` *
+        # security_center_properties.resource_owners: `=`, `:` For example, `
+        # resource_properties.size = 100` is a valid filter string. Use a partial match
+        # on the empty string to filter based on a property existing: `
+        # resource_properties.my_property : ""` Use a negated partial match on the empty
+        # string to filter based on a property not existing: `-resource_properties.
+        # my_property : ""`
         # Corresponds to the JSON property `filter`
         # @return [String]
         attr_accessor :filter
       
         # Required. Expression that defines what assets fields to use for grouping. The
-        # string
-        # value should follow SQL syntax: comma separated list of fields. For
-        # example:
-        # "security_center_properties.resource_project,security_center_properties.
-        # project".
-        # The following fields are supported when compare_duration is not set:
-        # * security_center_properties.resource_project
-        # * security_center_properties.resource_project_display_name
-        # * security_center_properties.resource_type
-        # * security_center_properties.resource_parent
-        # * security_center_properties.resource_parent_display_name
-        # The following fields are supported when compare_duration is set:
-        # * security_center_properties.resource_type
-        # * security_center_properties.resource_project_display_name
-        # * security_center_properties.resource_parent_display_name
+        # string value should follow SQL syntax: comma separated list of fields. For
+        # example: "security_center_properties.resource_project,
+        # security_center_properties.project". The following fields are supported when
+        # compare_duration is not set: * security_center_properties.resource_project *
+        # security_center_properties.resource_project_display_name *
+        # security_center_properties.resource_type * security_center_properties.
+        # resource_parent * security_center_properties.resource_parent_display_name The
+        # following fields are supported when compare_duration is set: *
+        # security_center_properties.resource_type * security_center_properties.
+        # resource_project_display_name * security_center_properties.
+        # resource_parent_display_name
         # Corresponds to the JSON property `groupBy`
         # @return [String]
         attr_accessor :group_by
       
-        # The maximum number of results to return in a single response. Default is
-        # 10, minimum is 1, maximum is 1000.
+        # The maximum number of results to return in a single response. Default is 10,
+        # minimum is 1, maximum is 1000.
         # Corresponds to the JSON property `pageSize`
         # @return [Fixnum]
         attr_accessor :page_size
       
-        # The value returned by the last `GroupAssetsResponse`; indicates
-        # that this is a continuation of a prior `GroupAssets` call, and that the
-        # system should return the next page of data.
+        # The value returned by the last `GroupAssetsResponse`; indicates that this is a
+        # continuation of a prior `GroupAssets` call, and that the system should return
+        # the next page of data.
         # Corresponds to the JSON property `pageToken`
         # @return [String]
         attr_accessor :page_token
       
-        # Time used as a reference point when filtering assets. The filter is limited
-        # to assets existing at the supplied time and their values are those at that
-        # specific time. Absence of this field will default to the API's version of
-        # NOW.
+        # Time used as a reference point when filtering assets. The filter is limited to
+        # assets existing at the supplied time and their values are those at that
+        # specific time. Absence of this field will default to the API's version of NOW.
         # Corresponds to the JSON property `readTime`
         # @return [String]
         attr_accessor :read_time
@@ -1266,9 +1143,9 @@ module Google
       class GroupAssetsResponse
         include Google::Apis::Core::Hashable
       
-        # Group results. There exists an element for each existing unique
-        # combination of property/values. The element contains a count for the number
-        # of times those specific property/values appear.
+        # Group results. There exists an element for each existing unique combination of
+        # property/values. The element contains a count for the number of times those
+        # specific property/values appear.
         # Corresponds to the JSON property `groupByResults`
         # @return [Array<Google::Apis::SecuritycenterV1::GroupResult>]
         attr_accessor :group_by_results
@@ -1307,108 +1184,79 @@ module Google
         include Google::Apis::Core::Hashable
       
         # When compare_duration is set, the GroupResult's "state_change" attribute is
-        # updated to indicate whether the finding had its state changed, the
-        # finding's state remained unchanged, or if the finding was added during the
-        # compare_duration period of time that precedes the read_time. This is the
-        # time between (read_time - compare_duration) and read_time.
-        # The state_change value is derived based on the presence and state of the
-        # finding at the two points in time. Intermediate state changes between the
-        # two times don't affect the result. For example, the results aren't affected
-        # if the finding is made inactive and then active again.
-        # Possible "state_change" values when compare_duration is specified:
-        # * "CHANGED":   indicates that the finding was present and matched the given
-        # filter at the start of compare_duration, but changed its
-        # state at read_time.
-        # * "UNCHANGED": indicates that the finding was present and matched the given
-        # filter at the start of compare_duration and did not change
-        # state at read_time.
-        # * "ADDED":     indicates that the finding did not match the given filter or
-        # was not present at the start of compare_duration, but was
-        # present at read_time.
-        # * "REMOVED":   indicates that the finding was present and matched the
-        # filter at the start of compare_duration, but did not match
-        # the filter at read_time.
-        # If compare_duration is not specified, then the only possible state_change
-        # is "UNUSED",  which will be the state_change set for all findings present
-        # at read_time.
-        # If this field is set then `state_change` must be a specified field in
-        # `group_by`.
+        # updated to indicate whether the finding had its state changed, the finding's
+        # state remained unchanged, or if the finding was added during the
+        # compare_duration period of time that precedes the read_time. This is the time
+        # between (read_time - compare_duration) and read_time. The state_change value
+        # is derived based on the presence and state of the finding at the two points in
+        # time. Intermediate state changes between the two times don't affect the result.
+        # For example, the results aren't affected if the finding is made inactive and
+        # then active again. Possible "state_change" values when compare_duration is
+        # specified: * "CHANGED": indicates that the finding was present and matched the
+        # given filter at the start of compare_duration, but changed its state at
+        # read_time. * "UNCHANGED": indicates that the finding was present and matched
+        # the given filter at the start of compare_duration and did not change state at
+        # read_time. * "ADDED": indicates that the finding did not match the given
+        # filter or was not present at the start of compare_duration, but was present at
+        # read_time. * "REMOVED": indicates that the finding was present and matched the
+        # filter at the start of compare_duration, but did not match the filter at
+        # read_time. If compare_duration is not specified, then the only possible
+        # state_change is "UNUSED", which will be the state_change set for all findings
+        # present at read_time. If this field is set then `state_change` must be a
+        # specified field in `group_by`.
         # Corresponds to the JSON property `compareDuration`
         # @return [String]
         attr_accessor :compare_duration
       
-        # Expression that defines the filter to apply across findings.
-        # The expression is a list of one or more restrictions combined via logical
-        # operators `AND` and `OR`.
-        # Parentheses are supported, and `OR` has higher precedence than `AND`.
-        # Restrictions have the form `<field> <operator> <value>` and may have a `-`
-        # character in front of them to indicate negation. Examples include:
-        # * name
-        # * source_properties.a_property
-        # * security_marks.marks.marka
-        # The supported operators are:
-        # * `=` for all value types.
-        # * `>`, `<`, `>=`, `<=` for integer values.
-        # * `:`, meaning substring matching, for strings.
-        # The supported value types are:
-        # * string literals in quotes.
-        # * integer literals without quotes.
-        # * boolean literals `true` and `false` without quotes.
-        # The following field and operator combinations are supported:
-        # * name: `=`
-        # * parent: `=`, `:`
-        # * resource_name: `=`, `:`
-        # * state: `=`, `:`
-        # * category: `=`, `:`
-        # * external_uri: `=`, `:`
-        # * event_time: `=`, `>`, `<`, `>=`, `<=`
-        # Usage: This should be milliseconds since epoch or an RFC3339 string.
-        # Examples:
-        # `event_time = "2019-06-10T16:07:18-07:00"`
-        # `event_time = 1560208038000`
-        # * security_marks.marks: `=`, `:`
-        # * source_properties: `=`, `:`, `>`, `<`, `>=`, `<=`
-        # For example, `source_properties.size = 100` is a valid filter string.
-        # Use a partial match on the empty string to filter based on a property
-        # existing: `source_properties.my_property : ""`
-        # Use a negated partial match on the empty string to filter based on a
-        # property not existing: `-source_properties.my_property : ""`
+        # Expression that defines the filter to apply across findings. The expression is
+        # a list of one or more restrictions combined via logical operators `AND` and `
+        # OR`. Parentheses are supported, and `OR` has higher precedence than `AND`.
+        # Restrictions have the form ` ` and may have a `-` character in front of them
+        # to indicate negation. Examples include: * name * source_properties.a_property *
+        # security_marks.marks.marka The supported operators are: * `=` for all value
+        # types. * `>`, `<`, `>=`, `<=` for integer values. * `:`, meaning substring
+        # matching, for strings. The supported value types are: * string literals in
+        # quotes. * integer literals without quotes. * boolean literals `true` and `
+        # false` without quotes. The following field and operator combinations are
+        # supported: * name: `=` * parent: `=`, `:` * resource_name: `=`, `:` * state: `=
+        # `, `:` * category: `=`, `:` * external_uri: `=`, `:` * event_time: `=`, `>`, `<
+        # `, `>=`, `<=` Usage: This should be milliseconds since epoch or an RFC3339
+        # string. Examples: `event_time = "2019-06-10T16:07:18-07:00"` `event_time =
+        # 1560208038000` * security_marks.marks: `=`, `:` * source_properties: `=`, `:`,
+        # `>`, `<`, `>=`, `<=` For example, `source_properties.size = 100` is a valid
+        # filter string. Use a partial match on the empty string to filter based on a
+        # property existing: `source_properties.my_property : ""` Use a negated partial
+        # match on the empty string to filter based on a property not existing: `-
+        # source_properties.my_property : ""`
         # Corresponds to the JSON property `filter`
         # @return [String]
         attr_accessor :filter
       
         # Required. Expression that defines what assets fields to use for grouping (
-        # including
-        # `state_change`). The string value should follow SQL syntax: comma separated
-        # list of fields. For example: "parent,resource_name".
-        # The following fields are supported:
-        # * resource_name
-        # * category
-        # * state
-        # * parent
-        # The following fields are supported when compare_duration is set:
-        # * state_change
+        # including `state_change`). The string value should follow SQL syntax: comma
+        # separated list of fields. For example: "parent,resource_name". The following
+        # fields are supported: * resource_name * category * state * parent The
+        # following fields are supported when compare_duration is set: * state_change
         # Corresponds to the JSON property `groupBy`
         # @return [String]
         attr_accessor :group_by
       
-        # The maximum number of results to return in a single response. Default is
-        # 10, minimum is 1, maximum is 1000.
+        # The maximum number of results to return in a single response. Default is 10,
+        # minimum is 1, maximum is 1000.
         # Corresponds to the JSON property `pageSize`
         # @return [Fixnum]
         attr_accessor :page_size
       
-        # The value returned by the last `GroupFindingsResponse`; indicates
-        # that this is a continuation of a prior `GroupFindings` call, and
-        # that the system should return the next page of data.
+        # The value returned by the last `GroupFindingsResponse`; indicates that this is
+        # a continuation of a prior `GroupFindings` call, and that the system should
+        # return the next page of data.
         # Corresponds to the JSON property `pageToken`
         # @return [String]
         attr_accessor :page_token
       
-        # Time used as a reference point when filtering findings. The filter is
-        # limited to findings existing at the supplied time and their values are
-        # those at that specific time. Absence of this field will default to the
-        # API's version of NOW.
+        # Time used as a reference point when filtering findings. The filter is limited
+        # to findings existing at the supplied time and their values are those at that
+        # specific time. Absence of this field will default to the API's version of NOW.
         # Corresponds to the JSON property `readTime`
         # @return [String]
         attr_accessor :read_time
@@ -1432,9 +1280,9 @@ module Google
       class GroupFindingsResponse
         include Google::Apis::Core::Hashable
       
-        # Group results. There exists an element for each existing unique
-        # combination of property/values. The element contains a count for the number
-        # of times those specific property/values appear.
+        # Group results. There exists an element for each existing unique combination of
+        # property/values. The element contains a count for the number of times those
+        # specific property/values appear.
         # Corresponds to the JSON property `groupByResults`
         # @return [Array<Google::Apis::SecuritycenterV1::GroupResult>]
         attr_accessor :group_by_results
@@ -1495,14 +1343,12 @@ module Google
       
       # Cloud IAM Policy information associated with the Google Cloud resource
       # described by the Security Command Center asset. This information is managed
-      # and defined by the Google Cloud resource and cannot be modified by the
-      # user.
+      # and defined by the Google Cloud resource and cannot be modified by the user.
       class IamPolicy
         include Google::Apis::Core::Hashable
       
-        # The JSON representation of the Policy associated with the asset.
-        # See https://cloud.google.com/iam/reference/rest/v1/Policy for format
-        # details.
+        # The JSON representation of the Policy associated with the asset. See https://
+        # cloud.google.com/iam/reference/rest/v1/Policy for format details.
         # Corresponds to the JSON property `policyBlob`
         # @return [String]
         attr_accessor :policy_blob
@@ -1559,12 +1405,11 @@ module Google
       class ListAssetsResult
         include Google::Apis::Core::Hashable
       
-        # Security Command Center representation of a Google Cloud
-        # resource.
-        # The Asset is a Security Command Center resource that captures information
-        # about a single Google Cloud resource. All modifications to an Asset are only
-        # within the context of Security Command Center and don't affect the referenced
-        # Google Cloud resource.
+        # Security Command Center representation of a Google Cloud resource. The Asset
+        # is a Security Command Center resource that captures information about a single
+        # Google Cloud resource. All modifications to an Asset are only within the
+        # context of Security Command Center and don't affect the referenced Google
+        # Cloud resource.
         # Corresponds to the JSON property `asset`
         # @return [Google::Apis::SecuritycenterV1::Asset]
         attr_accessor :asset
@@ -1627,18 +1472,17 @@ module Google
       class ListFindingsResult
         include Google::Apis::Core::Hashable
       
-        # Security Command Center finding.
-        # A finding is a record of assessment data like security, risk, health, or
-        # privacy, that is ingested into Security Command Center for presentation,
-        # notification, analysis, policy testing, and enforcement. For example, a
-        # cross-site scripting (XSS) vulnerability in an App Engine application is a
-        # finding.
+        # Security Command Center finding. A finding is a record of assessment data like
+        # security, risk, health, or privacy, that is ingested into Security Command
+        # Center for presentation, notification, analysis, policy testing, and
+        # enforcement. For example, a cross-site scripting (XSS) vulnerability in an App
+        # Engine application is a finding.
         # Corresponds to the JSON property `finding`
         # @return [Google::Apis::SecuritycenterV1::Finding]
         attr_accessor :finding
       
-        # Information related to the Google Cloud resource that is
-        # associated with this finding.
+        # Information related to the Google Cloud resource that is associated with this
+        # finding. LINT.IfChange
         # Corresponds to the JSON property `resource`
         # @return [Google::Apis::SecuritycenterV1::Resource]
         attr_accessor :resource
@@ -1737,9 +1581,9 @@ module Google
         end
       end
       
-      # Cloud Security Command Center (Cloud SCC) notification configs.
-      # A notification config is a Cloud SCC resource that contains the configuration
-      # to send notifications for create/update events of findings, assets and etc.
+      # Cloud Security Command Center (Cloud SCC) notification configs. A notification
+      # config is a Cloud SCC resource that contains the configuration to send
+      # notifications for create/update events of findings, assets and etc.
       class NotificationConfig
         include Google::Apis::Core::Hashable
       
@@ -1748,28 +1592,27 @@ module Google
         # @return [String]
         attr_accessor :description
       
-        # The relative resource name of this notification config. See:
-        # https://cloud.google.com/apis/design/resource_names#relative_resource_name
-        # Example:
-        # "organizations/`organization_id`/notificationConfigs/notify_public_bucket".
+        # The relative resource name of this notification config. See: https://cloud.
+        # google.com/apis/design/resource_names#relative_resource_name Example: "
+        # organizations/`organization_id`/notificationConfigs/notify_public_bucket".
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
       
-        # The PubSub topic to send notifications to. Its format is
-        # "projects/[project_id]/topics/[topic]".
+        # The PubSub topic to send notifications to. Its format is "projects/[project_id]
+        # /topics/[topic]".
         # Corresponds to the JSON property `pubsubTopic`
         # @return [String]
         attr_accessor :pubsub_topic
       
-        # Output only. The service account that needs "pubsub.topics.publish"
-        # permission to publish to the PubSub topic.
+        # Output only. The service account that needs "pubsub.topics.publish" permission
+        # to publish to the PubSub topic.
         # Corresponds to the JSON property `serviceAccount`
         # @return [String]
         attr_accessor :service_account
       
-        # The config for streaming-based notifications, which send each event as soon
-        # as it is detected.
+        # The config for streaming-based notifications, which send each event as soon as
+        # it is detected.
         # Corresponds to the JSON property `streamingConfig`
         # @return [Google::Apis::SecuritycenterV1::StreamingConfig]
         attr_accessor :streaming_config
@@ -1793,47 +1636,45 @@ module Google
       class Operation
         include Google::Apis::Core::Hashable
       
-        # If the value is `false`, it means the operation is still in progress.
-        # If `true`, the operation is completed, and either `error` or `response` is
-        # available.
+        # If the value is `false`, it means the operation is still in progress. If `true`
+        # , the operation is completed, and either `error` or `response` is available.
         # Corresponds to the JSON property `done`
         # @return [Boolean]
         attr_accessor :done
         alias_method :done?, :done
       
-        # The `Status` type defines a logical error model that is suitable for
-        # different programming environments, including REST APIs and RPC APIs. It is
-        # used by [gRPC](https://github.com/grpc). Each `Status` message contains
-        # three pieces of data: error code, error message, and error details.
-        # You can find out more about this error model and how to work with it in the
-        # [API Design Guide](https://cloud.google.com/apis/design/errors).
+        # The `Status` type defines a logical error model that is suitable for different
+        # programming environments, including REST APIs and RPC APIs. It is used by [
+        # gRPC](https://github.com/grpc). Each `Status` message contains three pieces of
+        # data: error code, error message, and error details. You can find out more
+        # about this error model and how to work with it in the [API Design Guide](https:
+        # //cloud.google.com/apis/design/errors).
         # Corresponds to the JSON property `error`
         # @return [Google::Apis::SecuritycenterV1::Status]
         attr_accessor :error
       
-        # Service-specific metadata associated with the operation.  It typically
-        # contains progress information and common metadata such as create time.
-        # Some services might not provide such metadata.  Any method that returns a
-        # long-running operation should document the metadata type, if any.
+        # Service-specific metadata associated with the operation. It typically contains
+        # progress information and common metadata such as create time. Some services
+        # might not provide such metadata. Any method that returns a long-running
+        # operation should document the metadata type, if any.
         # Corresponds to the JSON property `metadata`
         # @return [Hash<String,Object>]
         attr_accessor :metadata
       
         # The server-assigned name, which is only unique within the same service that
-        # originally returns it. If you use the default HTTP mapping, the
-        # `name` should be a resource name ending with `operations/`unique_id``.
+        # originally returns it. If you use the default HTTP mapping, the `name` should
+        # be a resource name ending with `operations/`unique_id``.
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
       
-        # The normal response of the operation in case of success.  If the original
-        # method returns no data on success, such as `Delete`, the response is
-        # `google.protobuf.Empty`.  If the original method is standard
-        # `Get`/`Create`/`Update`, the response should be the resource.  For other
-        # methods, the response should have the type `XxxResponse`, where `Xxx`
-        # is the original method name.  For example, if the original method name
-        # is `TakeSnapshot()`, the inferred response type is
-        # `TakeSnapshotResponse`.
+        # The normal response of the operation in case of success. If the original
+        # method returns no data on success, such as `Delete`, the response is `google.
+        # protobuf.Empty`. If the original method is standard `Get`/`Create`/`Update`,
+        # the response should be the resource. For other methods, the response should
+        # have the type `XxxResponse`, where `Xxx` is the original method name. For
+        # example, if the original method name is `TakeSnapshot()`, the inferred
+        # response type is `TakeSnapshotResponse`.
         # Corresponds to the JSON property `response`
         # @return [Hash<String,Object>]
         attr_accessor :response
@@ -1852,8 +1693,8 @@ module Google
         end
       end
       
-      # User specified settings that are attached to the Security Command
-      # Center organization.
+      # User specified settings that are attached to the Security Command Center
+      # organization.
       class OrganizationSettings
         include Google::Apis::Core::Hashable
       
@@ -1862,19 +1703,17 @@ module Google
         # @return [Google::Apis::SecuritycenterV1::AssetDiscoveryConfig]
         attr_accessor :asset_discovery_config
       
-        # A flag that indicates if Asset Discovery should be enabled. If the flag is
-        # set to `true`, then discovery of assets will occur. If it is set to `false,
-        # all historical assets will remain, but discovery of future assets will not
-        # occur.
+        # A flag that indicates if Asset Discovery should be enabled. If the flag is set
+        # to `true`, then discovery of assets will occur. If it is set to `false, all
+        # historical assets will remain, but discovery of future assets will not occur.
         # Corresponds to the JSON property `enableAssetDiscovery`
         # @return [Boolean]
         attr_accessor :enable_asset_discovery
         alias_method :enable_asset_discovery?, :enable_asset_discovery
       
-        # The relative resource name of the settings. See:
-        # https://cloud.google.com/apis/design/resource_names#relative_resource_name
-        # Example:
-        # "organizations/`organization_id`/organizationSettings".
+        # The relative resource name of the settings. See: https://cloud.google.com/apis/
+        # design/resource_names#relative_resource_name Example: "organizations/`
+        # organization_id`/organizationSettings".
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
@@ -1892,66 +1731,32 @@ module Google
       end
       
       # An Identity and Access Management (IAM) policy, which specifies access
-      # controls for Google Cloud resources.
-      # A `Policy` is a collection of `bindings`. A `binding` binds one or more
-      # `members` to a single `role`. Members can be user accounts, service accounts,
-      # Google groups, and domains (such as G Suite). A `role` is a named list of
-      # permissions; each `role` can be an IAM predefined role or a user-created
-      # custom role.
-      # For some types of Google Cloud resources, a `binding` can also specify a
-      # `condition`, which is a logical expression that allows access to a resource
-      # only if the expression evaluates to `true`. A condition can add constraints
-      # based on attributes of the request, the resource, or both. To learn which
-      # resources support conditions in their IAM policies, see the
-      # [IAM documentation](https://cloud.google.com/iam/help/conditions/resource-
-      # policies).
-      # **JSON example:**
-      # `
-      # "bindings": [
-      # `
-      # "role": "roles/resourcemanager.organizationAdmin",
-      # "members": [
-      # "user:mike@example.com",
-      # "group:admins@example.com",
-      # "domain:google.com",
-      # "serviceAccount:my-project-id@appspot.gserviceaccount.com"
-      # ]
-      # `,
-      # `
-      # "role": "roles/resourcemanager.organizationViewer",
-      # "members": [
-      # "user:eve@example.com"
-      # ],
-      # "condition": `
-      # "title": "expirable access",
-      # "description": "Does not grant access after Sep 2020",
-      # "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')
-      # ",
-      # `
-      # `
-      # ],
-      # "etag": "BwWWja0YfJA=",
-      # "version": 3
-      # `
-      # **YAML example:**
-      # bindings:
-      # - members:
-      # - user:mike@example.com
-      # - group:admins@example.com
-      # - domain:google.com
-      # - serviceAccount:my-project-id@appspot.gserviceaccount.com
-      # role: roles/resourcemanager.organizationAdmin
-      # - members:
-      # - user:eve@example.com
-      # role: roles/resourcemanager.organizationViewer
-      # condition:
-      # title: expirable access
-      # description: Does not grant access after Sep 2020
-      # expression: request.time < timestamp('2020-10-01T00:00:00.000Z')
-      # - etag: BwWWja0YfJA=
-      # - version: 3
-      # For a description of IAM and its features, see the
-      # [IAM documentation](https://cloud.google.com/iam/docs/).
+      # controls for Google Cloud resources. A `Policy` is a collection of `bindings`.
+      # A `binding` binds one or more `members` to a single `role`. Members can be
+      # user accounts, service accounts, Google groups, and domains (such as G Suite).
+      # A `role` is a named list of permissions; each `role` can be an IAM predefined
+      # role or a user-created custom role. For some types of Google Cloud resources,
+      # a `binding` can also specify a `condition`, which is a logical expression that
+      # allows access to a resource only if the expression evaluates to `true`. A
+      # condition can add constraints based on attributes of the request, the resource,
+      # or both. To learn which resources support conditions in their IAM policies,
+      # see the [IAM documentation](https://cloud.google.com/iam/help/conditions/
+      # resource-policies). **JSON example:** ` "bindings": [ ` "role": "roles/
+      # resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", "
+      # group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@
+      # appspot.gserviceaccount.com" ] `, ` "role": "roles/resourcemanager.
+      # organizationViewer", "members": [ "user:eve@example.com" ], "condition": ` "
+      # title": "expirable access", "description": "Does not grant access after Sep
+      # 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", `
+      # ` ], "etag": "BwWWja0YfJA=", "version": 3 ` **YAML example:** bindings: -
+      # members: - user:mike@example.com - group:admins@example.com - domain:google.
+      # com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/
+      # resourcemanager.organizationAdmin - members: - user:eve@example.com role:
+      # roles/resourcemanager.organizationViewer condition: title: expirable access
+      # description: Does not grant access after Sep 2020 expression: request.time <
+      # timestamp('2020-10-01T00:00:00.000Z') - etag: BwWWja0YfJA= - version: 3 For a
+      # description of IAM and its features, see the [IAM documentation](https://cloud.
+      # google.com/iam/docs/).
       class Policy
         include Google::Apis::Core::Hashable
       
@@ -1960,48 +1765,44 @@ module Google
         # @return [Array<Google::Apis::SecuritycenterV1::AuditConfig>]
         attr_accessor :audit_configs
       
-        # Associates a list of `members` to a `role`. Optionally, may specify a
-        # `condition` that determines how and when the `bindings` are applied. Each
-        # of the `bindings` must contain at least one member.
+        # Associates a list of `members` to a `role`. Optionally, may specify a `
+        # condition` that determines how and when the `bindings` are applied. Each of
+        # the `bindings` must contain at least one member.
         # Corresponds to the JSON property `bindings`
         # @return [Array<Google::Apis::SecuritycenterV1::Binding>]
         attr_accessor :bindings
       
-        # `etag` is used for optimistic concurrency control as a way to help
-        # prevent simultaneous updates of a policy from overwriting each other.
-        # It is strongly suggested that systems make use of the `etag` in the
-        # read-modify-write cycle to perform policy updates in order to avoid race
-        # conditions: An `etag` is returned in the response to `getIamPolicy`, and
-        # systems are expected to put that etag in the request to `setIamPolicy` to
-        # ensure that their change will be applied to the same version of the policy.
-        # **Important:** If you use IAM Conditions, you must include the `etag` field
-        # whenever you call `setIamPolicy`. If you omit this field, then IAM allows
-        # you to overwrite a version `3` policy with a version `1` policy, and all of
-        # the conditions in the version `3` policy are lost.
+        # `etag` is used for optimistic concurrency control as a way to help prevent
+        # simultaneous updates of a policy from overwriting each other. It is strongly
+        # suggested that systems make use of the `etag` in the read-modify-write cycle
+        # to perform policy updates in order to avoid race conditions: An `etag` is
+        # returned in the response to `getIamPolicy`, and systems are expected to put
+        # that etag in the request to `setIamPolicy` to ensure that their change will be
+        # applied to the same version of the policy. **Important:** If you use IAM
+        # Conditions, you must include the `etag` field whenever you call `setIamPolicy`.
+        # If you omit this field, then IAM allows you to overwrite a version `3` policy
+        # with a version `1` policy, and all of the conditions in the version `3` policy
+        # are lost.
         # Corresponds to the JSON property `etag`
         # NOTE: Values are automatically base64 encoded/decoded in the client library.
         # @return [String]
         attr_accessor :etag
       
-        # Specifies the format of the policy.
-        # Valid values are `0`, `1`, and `3`. Requests that specify an invalid value
-        # are rejected.
-        # Any operation that affects conditional role bindings must specify version
-        # `3`. This requirement applies to the following operations:
-        # * Getting a policy that includes a conditional role binding
-        # * Adding a conditional role binding to a policy
-        # * Changing a conditional role binding in a policy
-        # * Removing any role binding, with or without a condition, from a policy
-        # that includes conditions
-        # **Important:** If you use IAM Conditions, you must include the `etag` field
-        # whenever you call `setIamPolicy`. If you omit this field, then IAM allows
-        # you to overwrite a version `3` policy with a version `1` policy, and all of
-        # the conditions in the version `3` policy are lost.
-        # If a policy does not include any conditions, operations on that policy may
-        # specify any valid version or leave the field unset.
-        # To learn which resources support conditions in their IAM policies, see the
-        # [IAM documentation](https://cloud.google.com/iam/help/conditions/resource-
-        # policies).
+        # Specifies the format of the policy. Valid values are `0`, `1`, and `3`.
+        # Requests that specify an invalid value are rejected. Any operation that
+        # affects conditional role bindings must specify version `3`. This requirement
+        # applies to the following operations: * Getting a policy that includes a
+        # conditional role binding * Adding a conditional role binding to a policy *
+        # Changing a conditional role binding in a policy * Removing any role binding,
+        # with or without a condition, from a policy that includes conditions **
+        # Important:** If you use IAM Conditions, you must include the `etag` field
+        # whenever you call `setIamPolicy`. If you omit this field, then IAM allows you
+        # to overwrite a version `3` policy with a version `1` policy, and all of the
+        # conditions in the version `3` policy are lost. If a policy does not include
+        # any conditions, operations on that policy may specify any valid version or
+        # leave the field unset. To learn which resources support conditions in their
+        # IAM policies, see the [IAM documentation](https://cloud.google.com/iam/help/
+        # conditions/resource-policies).
         # Corresponds to the JSON property `version`
         # @return [Fixnum]
         attr_accessor :version
@@ -2019,13 +1820,13 @@ module Google
         end
       end
       
-      # Information related to the Google Cloud resource that is
-      # associated with this finding.
+      # Information related to the Google Cloud resource that is associated with this
+      # finding. LINT.IfChange
       class Resource
         include Google::Apis::Core::Hashable
       
-        # The full resource name of the resource. See:
-        # https://cloud.google.com/apis/design/resource_names#full_resource_name
+        # The full resource name of the resource. See: https://cloud.google.com/apis/
+        # design/resource_names#full_resource_name
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
@@ -2087,9 +1888,9 @@ module Google
         # @return [String]
         attr_accessor :resource_display_name
       
-        # The full resource name of the Google Cloud resource this asset
-        # represents. This field is immutable after create time. See:
-        # https://cloud.google.com/apis/design/resource_names#full_resource_name
+        # The full resource name of the Google Cloud resource this asset represents.
+        # This field is immutable after create time. See: https://cloud.google.com/apis/
+        # design/resource_names#full_resource_name
         # Corresponds to the JSON property `resourceName`
         # @return [String]
         attr_accessor :resource_name
@@ -2099,8 +1900,8 @@ module Google
         # @return [Array<String>]
         attr_accessor :resource_owners
       
-        # The full resource name of the immediate parent of the resource. See:
-        # https://cloud.google.com/apis/design/resource_names#full_resource_name
+        # The full resource name of the immediate parent of the resource. See: https://
+        # cloud.google.com/apis/design/resource_names#full_resource_name
         # Corresponds to the JSON property `resourceParent`
         # @return [String]
         attr_accessor :resource_parent
@@ -2110,8 +1911,8 @@ module Google
         # @return [String]
         attr_accessor :resource_parent_display_name
       
-        # The full resource name of the project the resource belongs to. See:
-        # https://cloud.google.com/apis/design/resource_names#full_resource_name
+        # The full resource name of the project the resource belongs to. See: https://
+        # cloud.google.com/apis/design/resource_names#full_resource_name
         # Corresponds to the JSON property `resourceProject`
         # @return [String]
         attr_accessor :resource_project
@@ -2121,10 +1922,9 @@ module Google
         # @return [String]
         attr_accessor :resource_project_display_name
       
-        # The type of the Google Cloud resource. Examples include: APPLICATION,
-        # PROJECT, and ORGANIZATION. This is a case insensitive field defined by
-        # Security Command Center and/or the producer of the resource and is
-        # immutable after create time.
+        # The type of the Google Cloud resource. Examples include: APPLICATION, PROJECT,
+        # and ORGANIZATION. This is a case insensitive field defined by Security Command
+        # Center and/or the producer of the resource and is immutable after create time.
         # Corresponds to the JSON property `resourceType`
         # @return [String]
         attr_accessor :resource_type
@@ -2146,30 +1946,26 @@ module Google
         end
       end
       
-      # User specified security marks that are attached to the parent Security
-      # Command Center resource. Security marks are scoped within a Security Command
-      # Center organization -- they can be modified and viewed by all users who have
-      # proper permissions on the organization.
+      # User specified security marks that are attached to the parent Security Command
+      # Center resource. Security marks are scoped within a Security Command Center
+      # organization -- they can be modified and viewed by all users who have proper
+      # permissions on the organization.
       class SecurityMarks
         include Google::Apis::Core::Hashable
       
         # Mutable user specified security marks belonging to the parent resource.
-        # Constraints are as follows:
-        # * Keys and values are treated as case insensitive
-        # * Keys must be between 1 - 256 characters (inclusive)
-        # * Keys must be letters, numbers, underscores, or dashes
-        # * Values have leading and trailing whitespace trimmed, remaining
-        # characters must be between 1 - 4096 characters (inclusive)
+        # Constraints are as follows: * Keys and values are treated as case insensitive *
+        # Keys must be between 1 - 256 characters (inclusive) * Keys must be letters,
+        # numbers, underscores, or dashes * Values have leading and trailing whitespace
+        # trimmed, remaining characters must be between 1 - 4096 characters (inclusive)
         # Corresponds to the JSON property `marks`
         # @return [Hash<String,String>]
         attr_accessor :marks
       
-        # The relative resource name of the SecurityMarks. See:
-        # https://cloud.google.com/apis/design/resource_names#relative_resource_name
-        # Examples:
-        # "organizations/`organization_id`/assets/`asset_id`/securityMarks"
-        # "organizations/`organization_id`/sources/`source_id`/findings/`finding_id`/
-        # securityMarks".
+        # The relative resource name of the SecurityMarks. See: https://cloud.google.com/
+        # apis/design/resource_names#relative_resource_name Examples: "organizations/`
+        # organization_id`/assets/`asset_id`/securityMarks" "organizations/`
+        # organization_id`/sources/`source_id`/findings/`finding_id`/securityMarks".
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
@@ -2215,74 +2011,39 @@ module Google
         include Google::Apis::Core::Hashable
       
         # An Identity and Access Management (IAM) policy, which specifies access
-        # controls for Google Cloud resources.
-        # A `Policy` is a collection of `bindings`. A `binding` binds one or more
-        # `members` to a single `role`. Members can be user accounts, service accounts,
-        # Google groups, and domains (such as G Suite). A `role` is a named list of
-        # permissions; each `role` can be an IAM predefined role or a user-created
-        # custom role.
-        # For some types of Google Cloud resources, a `binding` can also specify a
-        # `condition`, which is a logical expression that allows access to a resource
-        # only if the expression evaluates to `true`. A condition can add constraints
-        # based on attributes of the request, the resource, or both. To learn which
-        # resources support conditions in their IAM policies, see the
-        # [IAM documentation](https://cloud.google.com/iam/help/conditions/resource-
-        # policies).
-        # **JSON example:**
-        # `
-        # "bindings": [
-        # `
-        # "role": "roles/resourcemanager.organizationAdmin",
-        # "members": [
-        # "user:mike@example.com",
-        # "group:admins@example.com",
-        # "domain:google.com",
-        # "serviceAccount:my-project-id@appspot.gserviceaccount.com"
-        # ]
-        # `,
-        # `
-        # "role": "roles/resourcemanager.organizationViewer",
-        # "members": [
-        # "user:eve@example.com"
-        # ],
-        # "condition": `
-        # "title": "expirable access",
-        # "description": "Does not grant access after Sep 2020",
-        # "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')
-        # ",
-        # `
-        # `
-        # ],
-        # "etag": "BwWWja0YfJA=",
-        # "version": 3
-        # `
-        # **YAML example:**
-        # bindings:
-        # - members:
-        # - user:mike@example.com
-        # - group:admins@example.com
-        # - domain:google.com
-        # - serviceAccount:my-project-id@appspot.gserviceaccount.com
-        # role: roles/resourcemanager.organizationAdmin
-        # - members:
-        # - user:eve@example.com
-        # role: roles/resourcemanager.organizationViewer
-        # condition:
-        # title: expirable access
-        # description: Does not grant access after Sep 2020
-        # expression: request.time < timestamp('2020-10-01T00:00:00.000Z')
-        # - etag: BwWWja0YfJA=
-        # - version: 3
-        # For a description of IAM and its features, see the
-        # [IAM documentation](https://cloud.google.com/iam/docs/).
+        # controls for Google Cloud resources. A `Policy` is a collection of `bindings`.
+        # A `binding` binds one or more `members` to a single `role`. Members can be
+        # user accounts, service accounts, Google groups, and domains (such as G Suite).
+        # A `role` is a named list of permissions; each `role` can be an IAM predefined
+        # role or a user-created custom role. For some types of Google Cloud resources,
+        # a `binding` can also specify a `condition`, which is a logical expression that
+        # allows access to a resource only if the expression evaluates to `true`. A
+        # condition can add constraints based on attributes of the request, the resource,
+        # or both. To learn which resources support conditions in their IAM policies,
+        # see the [IAM documentation](https://cloud.google.com/iam/help/conditions/
+        # resource-policies). **JSON example:** ` "bindings": [ ` "role": "roles/
+        # resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", "
+        # group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@
+        # appspot.gserviceaccount.com" ] `, ` "role": "roles/resourcemanager.
+        # organizationViewer", "members": [ "user:eve@example.com" ], "condition": ` "
+        # title": "expirable access", "description": "Does not grant access after Sep
+        # 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", `
+        # ` ], "etag": "BwWWja0YfJA=", "version": 3 ` **YAML example:** bindings: -
+        # members: - user:mike@example.com - group:admins@example.com - domain:google.
+        # com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/
+        # resourcemanager.organizationAdmin - members: - user:eve@example.com role:
+        # roles/resourcemanager.organizationViewer condition: title: expirable access
+        # description: Does not grant access after Sep 2020 expression: request.time <
+        # timestamp('2020-10-01T00:00:00.000Z') - etag: BwWWja0YfJA= - version: 3 For a
+        # description of IAM and its features, see the [IAM documentation](https://cloud.
+        # google.com/iam/docs/).
         # Corresponds to the JSON property `policy`
         # @return [Google::Apis::SecuritycenterV1::Policy]
         attr_accessor :policy
       
         # OPTIONAL: A FieldMask specifying which fields of the policy to modify. Only
-        # the fields in the mask will be modified. If no mask is provided, the
-        # following default mask is used:
-        # `paths: "bindings, etag"`
+        # the fields in the mask will be modified. If no mask is provided, the following
+        # default mask is used: `paths: "bindings, etag"`
         # Corresponds to the JSON property `updateMask`
         # @return [String]
         attr_accessor :update_mask
@@ -2298,37 +2059,32 @@ module Google
         end
       end
       
-      # Security Command Center finding source. A finding source
-      # is an entity or a mechanism that can produce a finding. A source is like a
-      # container of findings that come from the same scanner, logger, monitor, and
-      # other tools.
+      # Security Command Center finding source. A finding source is an entity or a
+      # mechanism that can produce a finding. A source is like a container of findings
+      # that come from the same scanner, logger, monitor, and other tools.
       class Source
         include Google::Apis::Core::Hashable
       
-        # The description of the source (max of 1024 characters).
-        # Example:
-        # "Web Security Scanner is a web security scanner for common
-        # vulnerabilities in App Engine applications. It can automatically
-        # scan and detect four common vulnerabilities, including cross-site-scripting
-        # (XSS), Flash injection, mixed content (HTTP in HTTPS), and
-        # outdated or insecure libraries."
+        # The description of the source (max of 1024 characters). Example: "Web Security
+        # Scanner is a web security scanner for common vulnerabilities in App Engine
+        # applications. It can automatically scan and detect four common vulnerabilities,
+        # including cross-site-scripting (XSS), Flash injection, mixed content (HTTP in
+        # HTTPS), and outdated or insecure libraries."
         # Corresponds to the JSON property `description`
         # @return [String]
         attr_accessor :description
       
-        # The source's display name.
-        # A source's display name must be unique amongst its siblings, for example,
-        # two sources with the same parent can't share the same display name.
-        # The display name must have a length between 1 and 64 characters
-        # (inclusive).
+        # The source's display name. A source's display name must be unique amongst its
+        # siblings, for example, two sources with the same parent can't share the same
+        # display name. The display name must have a length between 1 and 64 characters (
+        # inclusive).
         # Corresponds to the JSON property `displayName`
         # @return [String]
         attr_accessor :display_name
       
-        # The relative resource name of this source. See:
-        # https://cloud.google.com/apis/design/resource_names#relative_resource_name
-        # Example:
-        # "organizations/`organization_id`/sources/`source_id`"
+        # The relative resource name of this source. See: https://cloud.google.com/apis/
+        # design/resource_names#relative_resource_name Example: "organizations/`
+        # organization_id`/sources/`source_id`"
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
@@ -2345,12 +2101,12 @@ module Google
         end
       end
       
-      # The `Status` type defines a logical error model that is suitable for
-      # different programming environments, including REST APIs and RPC APIs. It is
-      # used by [gRPC](https://github.com/grpc). Each `Status` message contains
-      # three pieces of data: error code, error message, and error details.
-      # You can find out more about this error model and how to work with it in the
-      # [API Design Guide](https://cloud.google.com/apis/design/errors).
+      # The `Status` type defines a logical error model that is suitable for different
+      # programming environments, including REST APIs and RPC APIs. It is used by [
+      # gRPC](https://github.com/grpc). Each `Status` message contains three pieces of
+      # data: error code, error message, and error details. You can find out more
+      # about this error model and how to work with it in the [API Design Guide](https:
+      # //cloud.google.com/apis/design/errors).
       class Status
         include Google::Apis::Core::Hashable
       
@@ -2359,15 +2115,15 @@ module Google
         # @return [Fixnum]
         attr_accessor :code
       
-        # A list of messages that carry the error details.  There is a common set of
+        # A list of messages that carry the error details. There is a common set of
         # message types for APIs to use.
         # Corresponds to the JSON property `details`
         # @return [Array<Hash<String,Object>>]
         attr_accessor :details
       
-        # A developer-facing error message, which should be in English. Any
-        # user-facing error message should be localized and sent in the
-        # google.rpc.Status.details field, or localized by the client.
+        # A developer-facing error message, which should be in English. Any user-facing
+        # error message should be localized and sent in the google.rpc.Status.details
+        # field, or localized by the client.
         # Corresponds to the JSON property `message`
         # @return [String]
         attr_accessor :message
@@ -2384,27 +2140,21 @@ module Google
         end
       end
       
-      # The config for streaming-based notifications, which send each event as soon
-      # as it is detected.
+      # The config for streaming-based notifications, which send each event as soon as
+      # it is detected.
       class StreamingConfig
         include Google::Apis::Core::Hashable
       
-        # Expression that defines the filter to apply across create/update events
-        # of assets or findings as specified by the event type. The expression is a
-        # list of zero or more restrictions combined via logical operators `AND`
-        # and `OR`. Parentheses are supported, and `OR` has higher precedence than
-        # `AND`.
-        # Restrictions have the form `<field> <operator> <value>` and may have a
-        # `-` character in front of them to indicate negation. The fields map to
-        # those defined in the corresponding resource.
-        # The supported operators are:
-        # * `=` for all value types.
-        # * `>`, `<`, `>=`, `<=` for integer values.
-        # * `:`, meaning substring matching, for strings.
-        # The supported value types are:
-        # * string literals in quotes.
-        # * integer literals without quotes.
-        # * boolean literals `true` and `false` without quotes.
+        # Expression that defines the filter to apply across create/update events of
+        # assets or findings as specified by the event type. The expression is a list of
+        # zero or more restrictions combined via logical operators `AND` and `OR`.
+        # Parentheses are supported, and `OR` has higher precedence than `AND`.
+        # Restrictions have the form ` ` and may have a `-` character in front of them
+        # to indicate negation. The fields map to those defined in the corresponding
+        # resource. The supported operators are: * `=` for all value types. * `>`, `<`, `
+        # >=`, `<=` for integer values. * `:`, meaning substring matching, for strings.
+        # The supported value types are: * string literals in quotes. * integer literals
+        # without quotes. * boolean literals `true` and `false` without quotes.
         # Corresponds to the JSON property `filter`
         # @return [String]
         attr_accessor :filter
@@ -2423,10 +2173,9 @@ module Google
       class TestIamPermissionsRequest
         include Google::Apis::Core::Hashable
       
-        # The set of permissions to check for the `resource`. Permissions with
-        # wildcards (such as '*' or 'storage.*') are not allowed. For more
-        # information see
-        # [IAM Overview](https://cloud.google.com/iam/docs/overview#permissions).
+        # The set of permissions to check for the `resource`. Permissions with wildcards
+        # (such as '*' or 'storage.*') are not allowed. For more information see [IAM
+        # Overview](https://cloud.google.com/iam/docs/overview#permissions).
         # Corresponds to the JSON property `permissions`
         # @return [Array<String>]
         attr_accessor :permissions
@@ -2445,8 +2194,7 @@ module Google
       class TestIamPermissionsResponse
         include Google::Apis::Core::Hashable
       
-        # A subset of `TestPermissionsRequest.permissions` that the caller is
-        # allowed.
+        # A subset of `TestPermissionsRequest.permissions` that the caller is allowed.
         # Corresponds to the JSON property `permissions`
         # @return [Array<String>]
         attr_accessor :permissions