google-api-client 0.41.1 → 0.43.0

data/generated/google/apis/monitoring_v3/classes.rb

@@ -49,10 +49,11 @@ module Google
         # The alignment_period specifies a time interval, in seconds, that is used to
         # divide the data in all the time series into consistent blocks of time. This
         # will be done before the per-series aligner can be applied to the data.The
-        # value must be at least 60 seconds. If a per-series aligner other than
-        # ALIGN_NONE is specified, this field is required or an error is returned. If no
-        # per-series aligner is specified, or the aligner ALIGN_NONE is specified, then
-        # this field is ignored.
+        # value must be at least 60 seconds, at most 104 weeks. If a per-series aligner
+        # other than ALIGN_NONE is specified, this field is required or an error is
+        # returned. If no per-series aligner is specified, or the aligner ALIGN_NONE is
+        # specified, then this field is ignored.The maximum value of the
+        # alignment_period is 2 years, or 104 weeks.
         # Corresponds to the JSON property `alignmentPeriod`
         # @return [String]
         attr_accessor :alignment_period
@@ -1015,17 +1016,18 @@ module Google
         end
       end
       
-      # A set of (label, value) pairs which were dropped during aggregation, attached
-      # to google.api.Distribution.Exemplars in google.api.Distribution values during
-      # aggregation.These values are used in combination with the label values that
-      # remain on the aggregated Distribution timeseries to construct the full label
-      # set for the exemplar values. The resulting full label set may be used to
-      # identify the specific task/job/instance (for example) which may be
-      # contributing to a long-tail, while allowing the storage savings of only
-      # storing aggregated distribution values for a large group.Note that there are
-      # no guarantees on ordering of the labels from exemplar-to-exemplar and from
-      # distribution-to-distribution in the same stream, and there may be duplicates.
-      # It is up to clients to resolve any ambiguities.
+      # A set of (label, value) pairs that were removed from a Distribution time
+      # series during aggregation and then added as an attachment to a Distribution.
+      # Exemplar.The full label set for the exemplars is constructed by using the
+      # dropped pairs in combination with the label values that remain on the
+      # aggregated Distribution time series. The constructed full label set can be
+      # used to identify the specific entity, such as the instance or job, which might
+      # be contributing to a long-tail. However, with dropped labels, the storage
+      # requirements are reduced because only the aggregated distribution values for a
+      # large group of time series are stored.Note that there are no guarantees on
+      # ordering of the labels from exemplar-to-exemplar and from distribution-to-
+      # distribution in the same stream, and there may be duplicates. It is up to
+      # clients to resolve any ambiguities.
       class DroppedLabels
         include Google::Apis::Core::Hashable
       
@@ -1903,6 +1905,12 @@ module Google
         # @return [Array<Google::Apis::MonitoringV3::NotificationChannel>]
         attr_accessor :notification_channels
       
+        # The total number of notification channels in all pages. This number is only an
+        # estimate, and may change in subsequent pages. https://aip.dev/158
+        # Corresponds to the JSON property `totalSize`
+        # @return [Fixnum]
+        attr_accessor :total_size
+      
         def initialize(**args)
            update!(**args)
         end
@@ -1911,6 +1919,7 @@ module Google
         def update!(**args)
           @next_page_token = args[:next_page_token] if args.key?(:next_page_token)
           @notification_channels = args[:notification_channels] if args.key?(:notification_channels)
+          @total_size = args[:total_size] if args.key?(:total_size)
         end
       end
       
@@ -2202,9 +2211,9 @@ module Google
       # deleting or altering it stops data collection and makes the metric type's
       # existing data unusable.The following are specific rules for service defined
       # Monitoring metric descriptors:
-      # type, metric_kind, value_type, description, display_name,  launch_stage fields
-      # are all required. The unit field must be specified  if the value_type is any
-      # of DOUBLE, INT64, DISTRIBUTION.
+      # type, metric_kind, value_type and description  fields are all required. The
+      # unit field must be specified  if the value_type is any of DOUBLE, INT64,
+      # DISTRIBUTION.
       # Maximum of default 500 metric descriptors per service is allowed.
       # Maximum of default 10 labels per metric descriptor is allowed.The default
       # maximum limit can be overridden. Please follow https://cloud.google.com/
@@ -2877,8 +2886,9 @@ module Google
         # @return [String]
         attr_accessor :name
       
-        # The type of notification channel, such as "email", "sms", etc. Notification
-        # channel types are globally unique.
+        # The type of notification channel, such as "email" and "sms". To view the full
+        # list of channels, see Channel descriptors (https://cloud.google.com/monitoring/
+        # alerts/using-channels-api#ncd). Notification channel types are globally unique.
         # Corresponds to the JSON property `type`
         # @return [String]
         attr_accessor :type
@@ -2975,18 +2985,26 @@ module Google
         # includes both: [startTime, endTime]. Valid time intervals depend on the
         # MetricKind of the metric value. In no case can the end time be earlier than
         # the start time.
-        # For a GAUGE metric, the startTime value is technically optional; if  no value
+        # For GAUGE metrics, the startTime value is technically optional; if  no value
         # is specified, the start time defaults to the value of the  end time, and the
         # interval represents a single point in time. If both  start and end times are
         # specified, they must be identical. Such an  interval is valid only for GAUGE
-        # metrics, which are point-in-time  measurements.
-        # For DELTA and CUMULATIVE metrics, the start time must be earlier  than the end
-        # time.
-        # In all cases, the start time of the next interval must be  at least a
-        # millisecond after the end time of the previous interval.  Because the interval
-        # is closed, if the start time of a new interval  is the same as the end time of
-        # the previous interval, data written  at the new start time could overwrite
-        # data written at the previous  end time.
+        # metrics, which are point-in-time  measurements. The end time of a new interval
+        # must be at least a  millisecond after the end time of the previous interval.
+        # For DELTA metrics, the start time and end time must specify a  non-zero
+        # interval, with subsequent points specifying contiguous and  non-overlapping
+        # intervals. For DELTA metrics, the start time of  the next interval must be at
+        # least a millisecond after the end time  of the previous interval.
+        # For CUMULATIVE metrics, the start time and end time must specify a  a non-zero
+        # interval, with subsequent points specifying the same  start time and
+        # increasing end times, until an event resets the  cumulative value to zero and
+        # sets a new start time for the following  points. The new start time must be at
+        # least a millisecond after the  end time of the previous interval.
+        # The start time of a new interval must be at least a millisecond after the  end
+        # time of the previous interval because intervals are closed. If the  start time
+        # of a new interval is the same as the end time of the previous  interval, then
+        # data written at the new start time could overwrite data  written at the
+        # previous end time.
         # Corresponds to the JSON property `interval`
         # @return [Google::Apis::MonitoringV3::TimeInterval]
         attr_accessor :interval
@@ -3017,18 +3035,26 @@ module Google
         # includes both: [startTime, endTime]. Valid time intervals depend on the
         # MetricKind of the metric value. In no case can the end time be earlier than
         # the start time.
-        # For a GAUGE metric, the startTime value is technically optional; if  no value
+        # For GAUGE metrics, the startTime value is technically optional; if  no value
         # is specified, the start time defaults to the value of the  end time, and the
         # interval represents a single point in time. If both  start and end times are
         # specified, they must be identical. Such an  interval is valid only for GAUGE
-        # metrics, which are point-in-time  measurements.
-        # For DELTA and CUMULATIVE metrics, the start time must be earlier  than the end
-        # time.
-        # In all cases, the start time of the next interval must be  at least a
-        # millisecond after the end time of the previous interval.  Because the interval
-        # is closed, if the start time of a new interval  is the same as the end time of
-        # the previous interval, data written  at the new start time could overwrite
-        # data written at the previous  end time.
+        # metrics, which are point-in-time  measurements. The end time of a new interval
+        # must be at least a  millisecond after the end time of the previous interval.
+        # For DELTA metrics, the start time and end time must specify a  non-zero
+        # interval, with subsequent points specifying contiguous and  non-overlapping
+        # intervals. For DELTA metrics, the start time of  the next interval must be at
+        # least a millisecond after the end time  of the previous interval.
+        # For CUMULATIVE metrics, the start time and end time must specify a  a non-zero
+        # interval, with subsequent points specifying the same  start time and
+        # increasing end times, until an event resets the  cumulative value to zero and
+        # sets a new start time for the following  points. The new start time must be at
+        # least a millisecond after the  end time of the previous interval.
+        # The start time of a new interval must be at least a millisecond after the  end
+        # time of the previous interval because intervals are closed. If the  start time
+        # of a new interval is the same as the end time of the previous  interval, then
+        # data written at the new start time could overwrite data  written at the
+        # previous end time.
         # Corresponds to the JSON property `timeInterval`
         # @return [Google::Apis::MonitoringV3::TimeInterval]
         attr_accessor :time_interval
@@ -3543,18 +3569,26 @@ module Google
       # includes both: [startTime, endTime]. Valid time intervals depend on the
       # MetricKind of the metric value. In no case can the end time be earlier than
       # the start time.
-      # For a GAUGE metric, the startTime value is technically optional; if  no value
+      # For GAUGE metrics, the startTime value is technically optional; if  no value
       # is specified, the start time defaults to the value of the  end time, and the
       # interval represents a single point in time. If both  start and end times are
       # specified, they must be identical. Such an  interval is valid only for GAUGE
-      # metrics, which are point-in-time  measurements.
-      # For DELTA and CUMULATIVE metrics, the start time must be earlier  than the end
-      # time.
-      # In all cases, the start time of the next interval must be  at least a
-      # millisecond after the end time of the previous interval.  Because the interval
-      # is closed, if the start time of a new interval  is the same as the end time of
-      # the previous interval, data written  at the new start time could overwrite
-      # data written at the previous  end time.
+      # metrics, which are point-in-time  measurements. The end time of a new interval
+      # must be at least a  millisecond after the end time of the previous interval.
+      # For DELTA metrics, the start time and end time must specify a  non-zero
+      # interval, with subsequent points specifying contiguous and  non-overlapping
+      # intervals. For DELTA metrics, the start time of  the next interval must be at
+      # least a millisecond after the end time  of the previous interval.
+      # For CUMULATIVE metrics, the start time and end time must specify a  a non-zero
+      # interval, with subsequent points specifying the same  start time and
+      # increasing end times, until an event resets the  cumulative value to zero and
+      # sets a new start time for the following  points. The new start time must be at
+      # least a millisecond after the  end time of the previous interval.
+      # The start time of a new interval must be at least a millisecond after the  end
+      # time of the previous interval because intervals are closed. If the  start time
+      # of a new interval is the same as the end time of the previous  interval, then
+      # data written at the new start time could overwrite data  written at the
+      # previous end time.
       class TimeInterval
         include Google::Apis::Core::Hashable
       
@@ -3639,6 +3673,13 @@ module Google
         # @return [Google::Apis::MonitoringV3::MonitoredResource]
         attr_accessor :resource
       
+        # The units in which the metric value is reported. It is only applicable if the
+        # value_type is INT64, DOUBLE, or DISTRIBUTION. The unit defines the
+        # representation of the stored metric values.
+        # Corresponds to the JSON property `unit`
+        # @return [String]
+        attr_accessor :unit
+      
         # The value type of the time series. When listing time series, this value type
         # might be different from the value type of the associated metric if this time
         # series is an alignment or reduction of other time series.When creating a time
@@ -3659,6 +3700,7 @@ module Google
           @metric_kind = args[:metric_kind] if args.key?(:metric_kind)
           @points = args[:points] if args.key?(:points)
           @resource = args[:resource] if args.key?(:resource)
+          @unit = args[:unit] if args.key?(:unit)
           @value_type = args[:value_type] if args.key?(:value_type)
         end
       end
@@ -4068,6 +4110,13 @@ module Google
         # @return [String]
         attr_accessor :metric_kind
       
+        # The unit in which time_series point values are reported. unit follows the UCUM
+        # format for units as seen in https://unitsofmeasure.org/ucum.html. unit is only
+        # valid if value_type is INTEGER, DOUBLE, DISTRIBUTION.
+        # Corresponds to the JSON property `unit`
+        # @return [String]
+        attr_accessor :unit
+      
         # The value type.
         # Corresponds to the JSON property `valueType`
         # @return [String]
@@ -4081,6 +4130,7 @@ module Google
         def update!(**args)
           @key = args[:key] if args.key?(:key)
           @metric_kind = args[:metric_kind] if args.key?(:metric_kind)
+          @unit = args[:unit] if args.key?(:unit)
           @value_type = args[:value_type] if args.key?(:value_type)
         end
       end

data/generated/google/apis/monitoring_v3/representations.rb

@@ -1060,6 +1060,7 @@ module Google
           property :next_page_token, as: 'nextPageToken'
           collection :notification_channels, as: 'notificationChannels', class: Google::Apis::MonitoringV3::NotificationChannel, decorator: Google::Apis::MonitoringV3::NotificationChannel::Representation
       
+          property :total_size, as: 'totalSize'
         end
       end
       
@@ -1454,6 +1455,7 @@ module Google
       
           property :resource, as: 'resource', class: Google::Apis::MonitoringV3::MonitoredResource, decorator: Google::Apis::MonitoringV3::MonitoredResource::Representation
       
+          property :unit, as: 'unit'
           property :value_type, as: 'valueType'
         end
       end
@@ -1560,6 +1562,7 @@ module Google
         class Representation < Google::Apis::Core::JsonRepresentation
           property :key, as: 'key'
           property :metric_kind, as: 'metricKind'
+          property :unit, as: 'unit'
           property :value_type, as: 'valueType'
         end
       end

data/generated/google/apis/monitoring_v3/service.rb

@@ -1236,10 +1236,11 @@ module Google
         #   The alignment_period specifies a time interval, in seconds, that is used to
         #   divide the data in all the time series into consistent blocks of time. This
         #   will be done before the per-series aligner can be applied to the data.The
-        #   value must be at least 60 seconds. If a per-series aligner other than
-        #   ALIGN_NONE is specified, this field is required or an error is returned. If no
-        #   per-series aligner is specified, or the aligner ALIGN_NONE is specified, then
-        #   this field is ignored.
+        #   value must be at least 60 seconds, at most 104 weeks. If a per-series aligner
+        #   other than ALIGN_NONE is specified, this field is required or an error is
+        #   returned. If no per-series aligner is specified, or the aligner ALIGN_NONE is
+        #   specified, then this field is ignored.The maximum value of the
+        #   alignment_period is 2 years, or 104 weeks.
         # @param [String] aggregation_cross_series_reducer
         #   The reduction operation to be used to combine time series into a single time
         #   series, where the value of each data point in the resulting series is a
@@ -1676,14 +1677,17 @@ module Google
         #   - `identifier_case`
         #   - `app_engine.module_id`
         #   - `cloud_endpoints.service`
-        #   - `cluster_istio.location`
-        #   - `cluster_istio.cluster_name`
-        #   - `cluster_istio.service_namespace`
-        #   - `cluster_istio.service_name`
+        #   - `mesh_istio.mesh_uid`
+        #   - `mesh_istio.service_namespace`
+        #   - `mesh_istio.service_name`
+        #   - `cluster_istio.location` (deprecated)
+        #   - `cluster_istio.cluster_name` (deprecated)
+        #   - `cluster_istio.service_namespace` (deprecated)
+        #   - `cluster_istio.service_name` (deprecated)
         #   identifier_case refers to which option in the identifier oneof is populated.
         #   For example, the filter identifier_case = "CUSTOM" would match all services
         #   with a value for the custom field. Valid options are "CUSTOM", "APP_ENGINE", "
-        #   CLOUD_ENDPOINTS", and "CLUSTER_ISTIO".
+        #   CLOUD_ENDPOINTS", "MESH_ISTIO", and "CLUSTER_ISTIO" (deprecated),
         # @param [Fixnum] page_size
         #   A non-negative number that is the maximum number of results to return. When 0,
         #   use default page size.

data/generated/google/apis/networkmanagement_v1.rb

@@ -26,7 +26,7 @@ module Google
     # @see https://cloud.google.com/
     module NetworkmanagementV1
       VERSION = 'V1'
-      REVISION = '20200505'
+      REVISION = '20200615'
 
       # View and manage your data across Google Cloud Platform services
       AUTH_CLOUD_PLATFORM = 'https://www.googleapis.com/auth/cloud-platform'

data/generated/google/apis/networkmanagement_v1/classes.rb

@@ -59,7 +59,7 @@ module Google
       # `
       # "audit_configs": [
       # `
-      # "service": "allServices"
+      # "service": "allServices",
       # "audit_log_configs": [
       # `
       # "log_type": "DATA_READ",
@@ -68,18 +68,18 @@ module Google
       # ]
       # `,
       # `
-      # "log_type": "DATA_WRITE",
+      # "log_type": "DATA_WRITE"
       # `,
       # `
-      # "log_type": "ADMIN_READ",
+      # "log_type": "ADMIN_READ"
       # `
       # ]
       # `,
       # `
-      # "service": "sampleservice.googleapis.com"
+      # "service": "sampleservice.googleapis.com",
       # "audit_log_configs": [
       # `
-      # "log_type": "DATA_READ",
+      # "log_type": "DATA_READ"
       # `,
       # `
       # "log_type": "DATA_WRITE",
@@ -131,7 +131,7 @@ module Google
       # ]
       # `,
       # `
-      # "log_type": "DATA_WRITE",
+      # "log_type": "DATA_WRITE"
       # `
       # ]
       # `

data/generated/google/apis/networkmanagement_v1beta1.rb

@@ -26,7 +26,7 @@ module Google
     # @see https://cloud.google.com/
     module NetworkmanagementV1beta1
       VERSION = 'V1beta1'
-      REVISION = '20200505'
+      REVISION = '20200615'
 
       # View and manage your data across Google Cloud Platform services
       AUTH_CLOUD_PLATFORM = 'https://www.googleapis.com/auth/cloud-platform'

data/generated/google/apis/networkmanagement_v1beta1/classes.rb

@@ -59,7 +59,7 @@ module Google
       # `
       # "audit_configs": [
       # `
-      # "service": "allServices"
+      # "service": "allServices",
       # "audit_log_configs": [
       # `
       # "log_type": "DATA_READ",
@@ -68,18 +68,18 @@ module Google
       # ]
       # `,
       # `
-      # "log_type": "DATA_WRITE",
+      # "log_type": "DATA_WRITE"
       # `,
       # `
-      # "log_type": "ADMIN_READ",
+      # "log_type": "ADMIN_READ"
       # `
       # ]
       # `,
       # `
-      # "service": "sampleservice.googleapis.com"
+      # "service": "sampleservice.googleapis.com",
       # "audit_log_configs": [
       # `
-      # "log_type": "DATA_READ",
+      # "log_type": "DATA_READ"
       # `,
       # `
       # "log_type": "DATA_WRITE",
@@ -131,7 +131,7 @@ module Google
       # ]
       # `,
       # `
-      # "log_type": "DATA_WRITE",
+      # "log_type": "DATA_WRITE"
       # `
       # ]
       # `

data/generated/google/apis/osconfig_v1.rb

@@ -26,7 +26,7 @@ module Google
     # @see https://cloud.google.com/
     module OsconfigV1
       VERSION = 'V1'
-      REVISION = '20200601'
+      REVISION = '20200731'
 
       # View and manage your data across Google Cloud Platform services
       AUTH_CLOUD_PLATFORM = 'https://www.googleapis.com/auth/cloud-platform'

data/generated/google/apis/osconfig_v1/classes.rb

@@ -90,6 +90,74 @@ module Google
         end
       end
       
+      # A resource that contains custom validation and enforcement steps.
+      class ExecResource
+        include Google::Apis::Core::Hashable
+      
+        # A file or script to execute.
+        # Corresponds to the JSON property `enforce`
+        # @return [Google::Apis::OsconfigV1::ExecResourceExec]
+        attr_accessor :enforce
+      
+        # A file or script to execute.
+        # Corresponds to the JSON property `validate`
+        # @return [Google::Apis::OsconfigV1::ExecResourceExec]
+        attr_accessor :validate
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @enforce = args[:enforce] if args.key?(:enforce)
+          @validate = args[:validate] if args.key?(:validate)
+        end
+      end
+      
+      # A file or script to execute.
+      class ExecResourceExec
+        include Google::Apis::Core::Hashable
+      
+        # Exit codes that indicate success.
+        # Corresponds to the JSON property `allowedSuccessCodes`
+        # @return [Array<Fixnum>]
+        attr_accessor :allowed_success_codes
+      
+        # Arguments to use.
+        # Corresponds to the JSON property `args`
+        # @return [Array<String>]
+        attr_accessor :args
+      
+        # A remote or local file.
+        # Corresponds to the JSON property `file`
+        # @return [Google::Apis::OsconfigV1::File]
+        attr_accessor :file
+      
+        # The script interpreter to use.
+        # Corresponds to the JSON property `interpreter`
+        # @return [String]
+        attr_accessor :interpreter
+      
+        # An inline script.
+        # Corresponds to the JSON property `script`
+        # @return [String]
+        attr_accessor :script
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @allowed_success_codes = args[:allowed_success_codes] if args.key?(:allowed_success_codes)
+          @args = args[:args] if args.key?(:args)
+          @file = args[:file] if args.key?(:file)
+          @interpreter = args[:interpreter] if args.key?(:interpreter)
+          @script = args[:script] if args.key?(:script)
+        end
+      end
+      
       # A step that runs an executable for a PatchJob.
       class ExecStep
         include Google::Apis::Core::Hashable
@@ -199,6 +267,12 @@ module Google
         # @return [Google::Apis::OsconfigV1::PatchConfig]
         attr_accessor :patch_config
       
+        # Patch rollout configuration specifications. Contains details on the
+        # concurrency control when applying patch(es) to all targeted VMs.
+        # Corresponds to the JSON property `rollout`
+        # @return [Google::Apis::OsconfigV1::PatchRollout]
+        attr_accessor :rollout
+      
         def initialize(**args)
            update!(**args)
         end
@@ -211,6 +285,234 @@ module Google
           @duration = args[:duration] if args.key?(:duration)
           @instance_filter = args[:instance_filter] if args.key?(:instance_filter)
           @patch_config = args[:patch_config] if args.key?(:patch_config)
+          @rollout = args[:rollout] if args.key?(:rollout)
+        end
+      end
+      
+      # A resource that extracts an archive
+      class ExtractArchiveResource
+        include Google::Apis::Core::Hashable
+      
+        # Local file path that signals this resource is in the desired state.
+        # The absence of this file will indicate whether the archive needs to be
+        # extracted.
+        # Corresponds to the JSON property `creates`
+        # @return [String]
+        attr_accessor :creates
+      
+        # Directory to extract archive to.
+        # Corresponds to the JSON property `destination`
+        # @return [String]
+        attr_accessor :destination
+      
+        # Whether to overwrite existing files during extraction. If this is set to
+        # true, any existing files in the destination location will be overwritten by
+        # the extraction.
+        # Corresponds to the JSON property `overwrite`
+        # @return [Boolean]
+        attr_accessor :overwrite
+        alias_method :overwrite?, :overwrite
+      
+        # A remote or local file.
+        # Corresponds to the JSON property `source`
+        # @return [Google::Apis::OsconfigV1::File]
+        attr_accessor :source
+      
+        # The type of the archive to extract.
+        # Corresponds to the JSON property `type`
+        # @return [String]
+        attr_accessor :type
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @creates = args[:creates] if args.key?(:creates)
+          @destination = args[:destination] if args.key?(:destination)
+          @overwrite = args[:overwrite] if args.key?(:overwrite)
+          @source = args[:source] if args.key?(:source)
+          @type = args[:type] if args.key?(:type)
+        end
+      end
+      
+      # A remote or local file.
+      class File
+        include Google::Apis::Core::Hashable
+      
+        # Defaults to false. When false, files will be subject to validations
+        # based on the file type:
+        # Remote: A checksum must be specified.
+        # GCS:    An object generation number must be specified.
+        # Corresponds to the JSON property `allowInsecure`
+        # @return [Boolean]
+        attr_accessor :allow_insecure
+        alias_method :allow_insecure?, :allow_insecure
+      
+        # Specifies a file available as a GCS Object.
+        # Corresponds to the JSON property `gcs`
+        # @return [Google::Apis::OsconfigV1::FileGcs]
+        attr_accessor :gcs
+      
+        # A local path to use.
+        # Corresponds to the JSON property `localPath`
+        # @return [String]
+        attr_accessor :local_path
+      
+        # Specifies a file available via some URI.
+        # Corresponds to the JSON property `remote`
+        # @return [Google::Apis::OsconfigV1::FileRemote]
+        attr_accessor :remote
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @allow_insecure = args[:allow_insecure] if args.key?(:allow_insecure)
+          @gcs = args[:gcs] if args.key?(:gcs)
+          @local_path = args[:local_path] if args.key?(:local_path)
+          @remote = args[:remote] if args.key?(:remote)
+        end
+      end
+      
+      # Specifies a file available as a GCS Object.
+      class FileGcs
+        include Google::Apis::Core::Hashable
+      
+        # Bucket of the GCS object.
+        # Corresponds to the JSON property `bucket`
+        # @return [String]
+        attr_accessor :bucket
+      
+        # Generation number of the GCS object.
+        # Corresponds to the JSON property `generation`
+        # @return [Fixnum]
+        attr_accessor :generation
+      
+        # Name of the GCS object.
+        # Corresponds to the JSON property `object`
+        # @return [String]
+        attr_accessor :object
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @bucket = args[:bucket] if args.key?(:bucket)
+          @generation = args[:generation] if args.key?(:generation)
+          @object = args[:object] if args.key?(:object)
+        end
+      end
+      
+      # Specifies a file available via some URI.
+      class FileRemote
+        include Google::Apis::Core::Hashable
+      
+        # SHA256 checksum of the remote file.
+        # Corresponds to the JSON property `sha256Checksum`
+        # @return [String]
+        attr_accessor :sha256_checksum
+      
+        # URI from which to fetch the object. It should contain both the protocol
+        # and path following the format `protocol`://`location`.
+        # Corresponds to the JSON property `uri`
+        # @return [String]
+        attr_accessor :uri
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @sha256_checksum = args[:sha256_checksum] if args.key?(:sha256_checksum)
+          @uri = args[:uri] if args.key?(:uri)
+        end
+      end
+      
+      # A resource that manages the state of a file.
+      class FileResource
+        include Google::Apis::Core::Hashable
+      
+        # A a file with this content.
+        # Corresponds to the JSON property `content`
+        # @return [String]
+        attr_accessor :content
+      
+        # A remote or local file.
+        # Corresponds to the JSON property `file`
+        # @return [Google::Apis::OsconfigV1::File]
+        attr_accessor :file
+      
+        # The absolute path of the file.
+        # Corresponds to the JSON property `path`
+        # @return [String]
+        attr_accessor :path
+      
+        # Consists of three octal digits which represent, in
+        # order, the permissions of the owner, group, and other users for the
+        # file (similarly to the numeric mode used in the linux chmod utility).
+        # Each digit represents a three bit number with the 4 bit
+        # corresponding to the read permissions, the 2 bit corresponds to the
+        # write bit, and the one bit corresponds to the execute permission.
+        # Default behavior is 755.
+        # Below are some examples of permissions and their associated values:
+        # read, write, and execute: 7
+        # read and execute: 5
+        # read and write: 6
+        # read only: 4
+        # Corresponds to the JSON property `permissions`
+        # @return [String]
+        attr_accessor :permissions
+      
+        # Desired state of the file.
+        # Corresponds to the JSON property `state`
+        # @return [String]
+        attr_accessor :state
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @content = args[:content] if args.key?(:content)
+          @file = args[:file] if args.key?(:file)
+          @path = args[:path] if args.key?(:path)
+          @permissions = args[:permissions] if args.key?(:permissions)
+          @state = args[:state] if args.key?(:state)
+        end
+      end
+      
+      # Message encapsulating a value that can be either absolute ("fixed") or
+      # relative ("percent") to a value.
+      class FixedOrPercent
+        include Google::Apis::Core::Hashable
+      
+        # Specifies a fixed value.
+        # Corresponds to the JSON property `fixed`
+        # @return [Fixnum]
+        attr_accessor :fixed
+      
+        # Specifies the relative value defined as a percentage, which will be
+        # multiplied by a reference value.
+        # Corresponds to the JSON property `percent`
+        # @return [Fixnum]
+        attr_accessor :percent
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @fixed = args[:fixed] if args.key?(:fixed)
+          @percent = args[:percent] if args.key?(:percent)
         end
       end
       
@@ -384,6 +686,252 @@ module Google
         end
       end
       
+      # A resource that manages a system package.
+      class PackageResource
+        include Google::Apis::Core::Hashable
+      
+        # A package managed by APT.
+        # install: `apt-get update && apt-get -y install [name]`
+        # remove: `apt-get -y remove [name]`
+        # Corresponds to the JSON property `apt`
+        # @return [Google::Apis::OsconfigV1::PackageResourceApt]
+        attr_accessor :apt
+      
+        # A deb package file. dpkg packages only support INSTALLED state.
+        # Corresponds to the JSON property `deb`
+        # @return [Google::Apis::OsconfigV1::PackageResourceDeb]
+        attr_accessor :deb
+      
+        # The desired_state the agent should maintain for this package. The
+        # default is to ensure the package is installed.
+        # Corresponds to the JSON property `desiredState`
+        # @return [String]
+        attr_accessor :desired_state
+      
+        # A package managed by GooGet.
+        # install: `googet -noconfirm install package`
+        # remove: `googet -noconfirm remove package`
+        # Corresponds to the JSON property `googet`
+        # @return [Google::Apis::OsconfigV1::PackageResourceGooGet]
+        attr_accessor :googet
+      
+        # An MSI package. MSI packages only support INSTALLED state.
+        # Install msiexec /i /qn /norestart
+        # Corresponds to the JSON property `msi`
+        # @return [Google::Apis::OsconfigV1::PackageResourceMsi]
+        attr_accessor :msi
+      
+        # An RPM package file. RPM packages only support INSTALLED state.
+        # Corresponds to the JSON property `rpm`
+        # @return [Google::Apis::OsconfigV1::PackageResourceRpm]
+        attr_accessor :rpm
+      
+        # A package managed by YUM.
+        # install: `yum -y install package`
+        # remove: `yum -y remove package`
+        # Corresponds to the JSON property `yum`
+        # @return [Google::Apis::OsconfigV1::PackageResourceYum]
+        attr_accessor :yum
+      
+        # A package managed by Zypper.
+        # install: `zypper -y install package`
+        # remove: `zypper -y rm package`
+        # Corresponds to the JSON property `zypper`
+        # @return [Google::Apis::OsconfigV1::PackageResourceZypper]
+        attr_accessor :zypper
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @apt = args[:apt] if args.key?(:apt)
+          @deb = args[:deb] if args.key?(:deb)
+          @desired_state = args[:desired_state] if args.key?(:desired_state)
+          @googet = args[:googet] if args.key?(:googet)
+          @msi = args[:msi] if args.key?(:msi)
+          @rpm = args[:rpm] if args.key?(:rpm)
+          @yum = args[:yum] if args.key?(:yum)
+          @zypper = args[:zypper] if args.key?(:zypper)
+        end
+      end
+      
+      # A package managed by APT.
+      # install: `apt-get update && apt-get -y install [name]`
+      # remove: `apt-get -y remove [name]`
+      class PackageResourceApt
+        include Google::Apis::Core::Hashable
+      
+        # Package name.
+        # Corresponds to the JSON property `name`
+        # @return [String]
+        attr_accessor :name
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @name = args[:name] if args.key?(:name)
+        end
+      end
+      
+      # A deb package file. dpkg packages only support INSTALLED state.
+      class PackageResourceDeb
+        include Google::Apis::Core::Hashable
+      
+        # Whether dependencies should also be installed.
+        # install when false: `dpkg -i package`
+        # install when true: `apt-get update && apt-get -y install package.deb`
+        # Corresponds to the JSON property `pullDeps`
+        # @return [Boolean]
+        attr_accessor :pull_deps
+        alias_method :pull_deps?, :pull_deps
+      
+        # A remote or local file.
+        # Corresponds to the JSON property `source`
+        # @return [Google::Apis::OsconfigV1::File]
+        attr_accessor :source
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @pull_deps = args[:pull_deps] if args.key?(:pull_deps)
+          @source = args[:source] if args.key?(:source)
+        end
+      end
+      
+      # A package managed by GooGet.
+      # install: `googet -noconfirm install package`
+      # remove: `googet -noconfirm remove package`
+      class PackageResourceGooGet
+        include Google::Apis::Core::Hashable
+      
+        # Package name.
+        # Corresponds to the JSON property `name`
+        # @return [String]
+        attr_accessor :name
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @name = args[:name] if args.key?(:name)
+        end
+      end
+      
+      # An MSI package. MSI packages only support INSTALLED state.
+      # Install msiexec /i /qn /norestart
+      class PackageResourceMsi
+        include Google::Apis::Core::Hashable
+      
+        # Return codes that indicate that the software installed or updated
+        # successfully. Behaviour defaults to [0]
+        # Corresponds to the JSON property `allowedSuccessCodes`
+        # @return [Array<Fixnum>]
+        attr_accessor :allowed_success_codes
+      
+        # Flags to use during package install.
+        # Appended to the defalts of "/i /qn /norestart"
+        # Corresponds to the JSON property `flags`
+        # @return [Array<String>]
+        attr_accessor :flags
+      
+        # A remote or local file.
+        # Corresponds to the JSON property `source`
+        # @return [Google::Apis::OsconfigV1::File]
+        attr_accessor :source
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @allowed_success_codes = args[:allowed_success_codes] if args.key?(:allowed_success_codes)
+          @flags = args[:flags] if args.key?(:flags)
+          @source = args[:source] if args.key?(:source)
+        end
+      end
+      
+      # An RPM package file. RPM packages only support INSTALLED state.
+      class PackageResourceRpm
+        include Google::Apis::Core::Hashable
+      
+        # Whether dependencies should also be installed.
+        # install when false: `rpm --upgrade --replacepkgs package.rpm`
+        # install when true: `yum -y install package.rpm` or
+        # `zypper -y install package.rpm`
+        # Corresponds to the JSON property `pullDeps`
+        # @return [Boolean]
+        attr_accessor :pull_deps
+        alias_method :pull_deps?, :pull_deps
+      
+        # A remote or local file.
+        # Corresponds to the JSON property `source`
+        # @return [Google::Apis::OsconfigV1::File]
+        attr_accessor :source
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @pull_deps = args[:pull_deps] if args.key?(:pull_deps)
+          @source = args[:source] if args.key?(:source)
+        end
+      end
+      
+      # A package managed by YUM.
+      # install: `yum -y install package`
+      # remove: `yum -y remove package`
+      class PackageResourceYum
+        include Google::Apis::Core::Hashable
+      
+        # Package name.
+        # Corresponds to the JSON property `name`
+        # @return [String]
+        attr_accessor :name
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @name = args[:name] if args.key?(:name)
+        end
+      end
+      
+      # A package managed by Zypper.
+      # install: `zypper -y install package`
+      # remove: `zypper -y rm package`
+      class PackageResourceZypper
+        include Google::Apis::Core::Hashable
+      
+        # Package name.
+        # Corresponds to the JSON property `name`
+        # @return [String]
+        attr_accessor :name
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @name = args[:name] if args.key?(:name)
+        end
+      end
+      
       # Patch configuration specifications. Contains details on how to apply the
       # patch(es) to a VM instance.
       class PatchConfig
@@ -517,8 +1065,14 @@ module Google
         # @return [Google::Apis::OsconfigV1::RecurringSchedule]
         attr_accessor :recurring_schedule
       
+        # Patch rollout configuration specifications. Contains details on the
+        # concurrency control when applying patch(es) to all targeted VMs.
+        # Corresponds to the JSON property `rollout`
+        # @return [Google::Apis::OsconfigV1::PatchRollout]
+        attr_accessor :rollout
+      
         # Output only. Time the patch deployment was last updated. Timestamp is in
-        # [RFC3339]("https://www.ietf.org/rfc/rfc3339.txt) text format.
+        # [RFC3339](https://www.ietf.org/rfc/rfc3339.txt) text format.
         # Corresponds to the JSON property `updateTime`
         # @return [String]
         attr_accessor :update_time
@@ -538,6 +1092,7 @@ module Google
           @one_time_schedule = args[:one_time_schedule] if args.key?(:one_time_schedule)
           @patch_config = args[:patch_config] if args.key?(:patch_config)
           @recurring_schedule = args[:recurring_schedule] if args.key?(:recurring_schedule)
+          @rollout = args[:rollout] if args.key?(:rollout)
           @update_time = args[:update_time] if args.key?(:update_time)
         end
       end
@@ -570,7 +1125,7 @@ module Google
         attr_accessor :instance_name_prefixes
       
         # Targets any of the VM instances specified. Instances are specified by their
-        # URI in the form `zones/[ZONE]/instances/[INSTANCE_NAME],
+        # URI in the form `zones/[ZONE]/instances/[INSTANCE_NAME]`,
         # `projects/[PROJECT_ID]/zones/[ZONE]/instances/[INSTANCE_NAME]`, or
         # `https://www.googleapis.com/compute/v1/projects/[PROJECT_ID]/zones/[ZONE]/
         # instances/[INSTANCE_NAME]`
@@ -709,6 +1264,12 @@ module Google
         # @return [Float]
         attr_accessor :percent_complete
       
+        # Patch rollout configuration specifications. Contains details on the
+        # concurrency control when applying patch(es) to all targeted VMs.
+        # Corresponds to the JSON property `rollout`
+        # @return [Google::Apis::OsconfigV1::PatchRollout]
+        attr_accessor :rollout
+      
         # The current state of the PatchJob.
         # Corresponds to the JSON property `state`
         # @return [String]
@@ -737,6 +1298,7 @@ module Google
           @patch_config = args[:patch_config] if args.key?(:patch_config)
           @patch_deployment = args[:patch_deployment] if args.key?(:patch_deployment)
           @percent_complete = args[:percent_complete] if args.key?(:percent_complete)
+          @rollout = args[:rollout] if args.key?(:rollout)
           @state = args[:state] if args.key?(:state)
           @update_time = args[:update_time] if args.key?(:update_time)
         end
@@ -898,6 +1460,33 @@ module Google
         end
       end
       
+      # Patch rollout configuration specifications. Contains details on the
+      # concurrency control when applying patch(es) to all targeted VMs.
+      class PatchRollout
+        include Google::Apis::Core::Hashable
+      
+        # Message encapsulating a value that can be either absolute ("fixed") or
+        # relative ("percent") to a value.
+        # Corresponds to the JSON property `disruptionBudget`
+        # @return [Google::Apis::OsconfigV1::FixedOrPercent]
+        attr_accessor :disruption_budget
+      
+        # Mode of the patch rollout.
+        # Corresponds to the JSON property `mode`
+        # @return [String]
+        attr_accessor :mode
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @disruption_budget = args[:disruption_budget] if args.key?(:disruption_budget)
+          @mode = args[:mode] if args.key?(:mode)
+        end
+      end
+      
       # Sets the time for recurring patch deployments.
       class RecurringSchedule
         include Google::Apis::Core::Hashable
@@ -972,6 +1561,213 @@ module Google
         end
       end
       
+      # A resource that manages a package repository.
+      class RepositoryResource
+        include Google::Apis::Core::Hashable
+      
+        # Represents a single apt package repository. These will be added to a repo
+        # file that will be managed at /etc/apt/sources.list.d/google_osconfig.list.
+        # Corresponds to the JSON property `apt`
+        # @return [Google::Apis::OsconfigV1::RepositoryResourceAptRepository]
+        attr_accessor :apt
+      
+        # Represents a Goo package repository. These will be added to a repo file
+        # that will be managed at C:/ProgramData/GooGet/repos/google_osconfig.repo.
+        # Corresponds to the JSON property `goo`
+        # @return [Google::Apis::OsconfigV1::RepositoryResourceGooRepository]
+        attr_accessor :goo
+      
+        # Represents a single yum package repository. These will be added to a repo
+        # file that will be managed at /etc/yum.repos.d/google_osconfig.repo.
+        # Corresponds to the JSON property `yum`
+        # @return [Google::Apis::OsconfigV1::RepositoryResourceYumRepository]
+        attr_accessor :yum
+      
+        # Represents a single zypper package repository. These will be added to a
+        # repo file that will be managed at /etc/zypp/repos.d/google_osconfig.repo.
+        # Corresponds to the JSON property `zypper`
+        # @return [Google::Apis::OsconfigV1::RepositoryResourceZypperRepository]
+        attr_accessor :zypper
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @apt = args[:apt] if args.key?(:apt)
+          @goo = args[:goo] if args.key?(:goo)
+          @yum = args[:yum] if args.key?(:yum)
+          @zypper = args[:zypper] if args.key?(:zypper)
+        end
+      end
+      
+      # Represents a single apt package repository. These will be added to a repo
+      # file that will be managed at /etc/apt/sources.list.d/google_osconfig.list.
+      class RepositoryResourceAptRepository
+        include Google::Apis::Core::Hashable
+      
+        # Type of archive files in this repository. The default behavior is DEB.
+        # Corresponds to the JSON property `archiveType`
+        # @return [String]
+        attr_accessor :archive_type
+      
+        # List of components for this repository. Must contain at least one item.
+        # Corresponds to the JSON property `components`
+        # @return [Array<String>]
+        attr_accessor :components
+      
+        # Distribution of this repository.
+        # Corresponds to the JSON property `distribution`
+        # @return [String]
+        attr_accessor :distribution
+      
+        # URI of the key file for this repository. The agent will maintain
+        # a keyring at /etc/apt/trusted.gpg.d/osconfig_agent_managed.gpg.
+        # Corresponds to the JSON property `gpgKey`
+        # @return [String]
+        attr_accessor :gpg_key
+      
+        # URI for this repository.
+        # Corresponds to the JSON property `uri`
+        # @return [String]
+        attr_accessor :uri
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @archive_type = args[:archive_type] if args.key?(:archive_type)
+          @components = args[:components] if args.key?(:components)
+          @distribution = args[:distribution] if args.key?(:distribution)
+          @gpg_key = args[:gpg_key] if args.key?(:gpg_key)
+          @uri = args[:uri] if args.key?(:uri)
+        end
+      end
+      
+      # Represents a Goo package repository. These will be added to a repo file
+      # that will be managed at C:/ProgramData/GooGet/repos/google_osconfig.repo.
+      class RepositoryResourceGooRepository
+        include Google::Apis::Core::Hashable
+      
+        # The name of the repository.
+        # Corresponds to the JSON property `name`
+        # @return [String]
+        attr_accessor :name
+      
+        # The url of the repository.
+        # Corresponds to the JSON property `url`
+        # @return [String]
+        attr_accessor :url
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @name = args[:name] if args.key?(:name)
+          @url = args[:url] if args.key?(:url)
+        end
+      end
+      
+      # Represents a single yum package repository. These will be added to a repo
+      # file that will be managed at /etc/yum.repos.d/google_osconfig.repo.
+      class RepositoryResourceYumRepository
+        include Google::Apis::Core::Hashable
+      
+        # The location of the repository directory.
+        # Corresponds to the JSON property `baseUrl`
+        # @return [String]
+        attr_accessor :base_url
+      
+        # The display name of the repository.
+        # Corresponds to the JSON property `displayName`
+        # @return [String]
+        attr_accessor :display_name
+      
+        # URIs of GPG keys.
+        # Corresponds to the JSON property `gpgKeys`
+        # @return [Array<String>]
+        attr_accessor :gpg_keys
+      
+        # A one word, unique name for this repository. This will be
+        # the `repo id` in the yum config file and also the `display_name` if
+        # `display_name` is omitted. This id is also used as the unique identifier
+        # when checking for resource conflicts.
+        # Corresponds to the JSON property `id`
+        # @return [String]
+        attr_accessor :id
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @base_url = args[:base_url] if args.key?(:base_url)
+          @display_name = args[:display_name] if args.key?(:display_name)
+          @gpg_keys = args[:gpg_keys] if args.key?(:gpg_keys)
+          @id = args[:id] if args.key?(:id)
+        end
+      end
+      
+      # Represents a single zypper package repository. These will be added to a
+      # repo file that will be managed at /etc/zypp/repos.d/google_osconfig.repo.
+      class RepositoryResourceZypperRepository
+        include Google::Apis::Core::Hashable
+      
+        # The location of the repository directory.
+        # Corresponds to the JSON property `baseUrl`
+        # @return [String]
+        attr_accessor :base_url
+      
+        # The display name of the repository.
+        # Corresponds to the JSON property `displayName`
+        # @return [String]
+        attr_accessor :display_name
+      
+        # URIs of GPG keys.
+        # Corresponds to the JSON property `gpgKeys`
+        # @return [Array<String>]
+        attr_accessor :gpg_keys
+      
+        # A one word, unique name for this repository. This will be
+        # the `repo id` in the zypper config file and also the `display_name` if
+        # `display_name` is omitted. This id is also used as the unique identifier
+        # when checking for GuestPolicy conflicts.
+        # Corresponds to the JSON property `id`
+        # @return [String]
+        attr_accessor :id
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @base_url = args[:base_url] if args.key?(:base_url)
+          @display_name = args[:display_name] if args.key?(:display_name)
+          @gpg_keys = args[:gpg_keys] if args.key?(:gpg_keys)
+          @id = args[:id] if args.key?(:id)
+        end
+      end
+      
+      # A resource that manages a system service.
+      class ServiceResource
+        include Google::Apis::Core::Hashable
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+        end
+      end
+      
       # Represents a time of day. The date and time zone are either not significant
       # or are specified elsewhere. An API may choose to allow leap seconds. Related
       # types are google.type.Date and `google.protobuf.Timestamp`.