google-api-client 0.36.0 → 0.37.0

data/generated/google/apis/monitoring_v3/classes.rb

@@ -22,57 +22,81 @@ module Google
   module Apis
     module MonitoringV3
       
-      # Describes how to combine multiple time series to provide different views of
-      # the data. Aggregation consists of an alignment step on individual time series (
-      # alignment_period and per_series_aligner) followed by an optional reduction
-      # step of the data across the aligned time series (cross_series_reducer and
-      # group_by_fields). For more details, see Aggregation.
+      # Describes how to combine multiple time series to provide a different view of
+      # the data. Aggregation of time series is done in two steps. First, each time
+      # series in the set is aligned to the same time interval boundaries, then the
+      # set of time series is optionally reduced in number.Alignment consists of
+      # applying the per_series_aligner operation to each time series after its data
+      # has been divided into regular alignment_period time intervals. This process
+      # takes all of the data points in an alignment period, applies a mathematical
+      # transformation such as averaging, minimum, maximum, delta, etc., and converts
+      # them into a single data point per period.Reduction is when the aligned and
+      # transformed time series can optionally be combined, reducing the number of
+      # time series through similar mathematical transformations. Reduction involves
+      # applying a cross_series_reducer to all the time series, optionally sorting the
+      # time series into subsets with group_by_fields, and applying the reducer to
+      # each subset.The raw time series data can contain a huge amount of information
+      # from multiple sources. Alignment and reduction transforms this mass of data
+      # into a more manageable and representative collection of data, for example "the
+      # 95% latency across the average of all tasks in a cluster". This representative
+      # data can be more easily graphed and comprehended, and the individual time
+      # series data is still available for later drilldown. For more details, see
+      # Aggregating Time Series.
       class Aggregation
         include Google::Apis::Core::Hashable
       
-        # The alignment period for per-time series alignment. If present,
-        # alignmentPeriod must be at least 60 seconds. After per-time series alignment,
-        # each time series will contain data points only on the period boundaries. If
-        # perSeriesAligner is not specified or equals ALIGN_NONE, then this field is
-        # ignored. If perSeriesAligner is specified and does not equal ALIGN_NONE, then
-        # this field must be defined; otherwise an error is returned.
+        # The alignment_period specifies a time interval, in seconds, that is used to
+        # divide the data in all the time series into consistent blocks of time. This
+        # will be done before the per-series aligner can be applied to the data.The
+        # value must be at least 60 seconds. If a per-series aligner other than
+        # ALIGN_NONE is specified, this field is required or an error is returned. If no
+        # per-series aligner is specified, or the aligner ALIGN_NONE is specified, then
+        # this field is ignored.
         # Corresponds to the JSON property `alignmentPeriod`
         # @return [String]
         attr_accessor :alignment_period
       
-        # The approach to be used to combine time series. Not all reducer functions may
-        # be applied to all time series, depending on the metric type and the value type
-        # of the original time series. Reduction may change the metric type of value
-        # type of the time series.Time series data must be aligned in order to perform
-        # cross-time series reduction. If crossSeriesReducer is specified, then
-        # perSeriesAligner must be specified and not equal ALIGN_NONE and
-        # alignmentPeriod must be specified; otherwise, an error is returned.
+        # The reduction operation to be used to combine time series into a single time
+        # series, where the value of each data point in the resulting series is a
+        # function of all the already aligned values in the input time series.Not all
+        # reducer operations can be applied to all time series. The valid choices depend
+        # on the metric_kind and the value_type of the original time series. Reduction
+        # can yield a time series with a different metric_kind or value_type than the
+        # input time series.Time series data must first be aligned (see
+        # per_series_aligner) in order to perform cross-time series reduction. If
+        # cross_series_reducer is specified, then per_series_aligner must be specified,
+        # and must not be ALIGN_NONE. An alignment_period must also be specified;
+        # otherwise, an error is returned.
         # Corresponds to the JSON property `crossSeriesReducer`
         # @return [String]
         attr_accessor :cross_series_reducer
       
-        # The set of fields to preserve when crossSeriesReducer is specified. The
-        # groupByFields determine how the time series are partitioned into subsets prior
-        # to applying the aggregation function. Each subset contains time series that
-        # have the same value for each of the grouping fields. Each individual time
-        # series is a member of exactly one subset. The crossSeriesReducer is applied to
-        # each subset of time series. It is not possible to reduce across different
+        # The set of fields to preserve when cross_series_reducer is specified. The
+        # group_by_fields determine how the time series are partitioned into subsets
+        # prior to applying the aggregation operation. Each subset contains time series
+        # that have the same value for each of the grouping fields. Each individual time
+        # series is a member of exactly one subset. The cross_series_reducer is applied
+        # to each subset of time series. It is not possible to reduce across different
         # resource types, so this field implicitly contains resource.type. Fields not
-        # specified in groupByFields are aggregated away. If groupByFields is not
+        # specified in group_by_fields are aggregated away. If group_by_fields is not
         # specified and all the time series have the same resource type, then the time
-        # series are aggregated into a single output time series. If crossSeriesReducer
-        # is not defined, this field is ignored.
+        # series are aggregated into a single output time series. If
+        # cross_series_reducer is not defined, this field is ignored.
         # Corresponds to the JSON property `groupByFields`
         # @return [Array<String>]
         attr_accessor :group_by_fields
       
-        # The approach to be used to align individual time series. Not all alignment
-        # functions may be applied to all time series, depending on the metric type and
-        # value type of the original time series. Alignment may change the metric type
-        # or the value type of the time series.Time series data must be aligned in order
-        # to perform cross-time series reduction. If crossSeriesReducer is specified,
-        # then perSeriesAligner must be specified and not equal ALIGN_NONE and
-        # alignmentPeriod must be specified; otherwise, an error is returned.
+        # An Aligner describes how to bring the data points in a single time series into
+        # temporal alignment. Except for ALIGN_NONE, all alignments cause all the data
+        # points in an alignment_period to be mathematically grouped together, resulting
+        # in a single data point for each alignment_period with end timestamp at the end
+        # of the period.Not all alignment operations may be applied to all time series.
+        # The valid choices depend on the metric_kind and value_type of the original
+        # time series. Alignment can change the metric_kind or the value_type of the
+        # time series.Time series data must be aligned in order to perform cross-time
+        # series reduction. If cross_series_reducer is specified, then
+        # per_series_aligner must be specified and not equal to ALIGN_NONE and
+        # alignment_period must be specified; otherwise, an error is returned.
         # Corresponds to the JSON property `perSeriesAligner`
         # @return [String]
         attr_accessor :per_series_aligner
@@ -97,14 +121,16 @@ module Google
         include Google::Apis::Core::Hashable
       
         # How to combine the results of multiple conditions to determine if an incident
-        # should be opened.
+        # should be opened. If condition_time_series_query_language is present, this
+        # must be COMBINE_UNSPECIFIED.
         # Corresponds to the JSON property `combiner`
         # @return [String]
         attr_accessor :combiner
       
         # A list of conditions for the policy. The conditions are combined by AND or OR
         # according to the combiner field. If the combined conditions evaluate to true,
-        # then an incident is created. A policy can have from one to six conditions.
+        # then an incident is created. A policy can have from one to six conditions. If
+        # condition_time_series_query_language is present, it must be the only condition.
         # Corresponds to the JSON property `conditions`
         # @return [Array<Google::Apis::MonitoringV3::Condition>]
         attr_accessor :conditions
@@ -142,9 +168,9 @@ module Google
         # @return [Google::Apis::MonitoringV3::MutationRecord]
         attr_accessor :mutation_record
       
-        # Required if the policy exists. The resource name for this policy. The syntax
+        # Required if the policy exists. The resource name for this policy. The format
         # is:
-        # projects/[PROJECT_ID]/alertPolicies/[ALERT_POLICY_ID]
+        # projects/[PROJECT_ID_OR_NUMBER]/alertPolicies/[ALERT_POLICY_ID]
         # [ALERT_POLICY_ID] is assigned by Stackdriver Monitoring when the policy is
         # created. When calling the alertPolicies.create method, do not include the name
         # field in the alerting policy passed as part of the request.
@@ -156,8 +182,8 @@ module Google
         # when incidents are opened or closed or when new violations occur on an already
         # opened incident. Each element of this array corresponds to the name field in
         # each of the NotificationChannel objects that are returned from the
-        # ListNotificationChannels method. The syntax of the entries in this field is:
-        # projects/[PROJECT_ID]/notificationChannels/[CHANNEL_ID]
+        # ListNotificationChannels method. The format of the entries in this field is:
+        # projects/[PROJECT_ID_OR_NUMBER]/notificationChannels/[CHANNEL_ID]
         # Corresponds to the JSON property `notificationChannels`
         # @return [Array<String>]
         attr_accessor :notification_channels
@@ -398,7 +424,8 @@ module Google
         end
       end
       
-      # Istio service. Learn more at http://istio.io.
+      # Istio service scoped to a single Kubernetes cluster. Learn more at http://
+      # istio.io.
       class ClusterIstio
         include Google::Apis::Core::Hashable
       
@@ -630,8 +657,9 @@ module Google
         attr_accessor :display_name
       
         # Required if the condition exists. The unique resource name for this condition.
-        # Its syntax is:
-        # projects/[PROJECT_ID]/alertPolicies/[POLICY_ID]/conditions/[CONDITION_ID]
+        # Its format is:
+        # projects/[PROJECT_ID_OR_NUMBER]/alertPolicies/[POLICY_ID]/conditions/[
+        # CONDITION_ID]
         # [CONDITION_ID] is assigned by Stackdriver Monitoring when the condition is
         # created as part of a new or updated alerting policy.When calling the
         # alertPolicies.create method, do not include the name field in the conditions
@@ -767,12 +795,12 @@ module Google
       class CreateTimeSeriesRequest
         include Google::Apis::Core::Hashable
       
-        # The new data to be added to a list of time series. Adds at most one data point
-        # to each of several time series. The new data point must be more recent than
-        # any other point in its time series. Each TimeSeries value must fully specify a
-        # unique time series by supplying all label values for the metric and the
-        # monitored resource.The maximum number of TimeSeries objects per Create request
-        # is 200.
+        # Required. The new data to be added to a list of time series. Adds at most one
+        # data point to each of several time series. The new data point must be more
+        # recent than any other point in its time series. Each TimeSeries value must
+        # fully specify a unique time series by supplying all label values for the
+        # metric and the monitored resource.The maximum number of TimeSeries objects per
+        # Create request is 200.
         # Corresponds to the JSON property `timeSeries`
         # @return [Array<Google::Apis::MonitoringV3::TimeSeries>]
         attr_accessor :time_series
@@ -1364,17 +1392,18 @@ module Google
         attr_accessor :is_cluster
         alias_method :is_cluster?, :is_cluster
       
-        # Output only. The name of this group. The format is "projects/`
-        # project_id_or_number`/groups/`group_id`". When creating a group, this field is
-        # ignored and a new name is created consisting of the project specified in the
-        # call to CreateGroup and a unique `group_id` that is generated automatically.
+        # Output only. The name of this group. The format is:
+        # projects/[PROJECT_ID_OR_NUMBER]/groups/[GROUP_ID]
+        # When creating a group, this field is ignored and a new name is created
+        # consisting of the project specified in the call to CreateGroup and a unique [
+        # GROUP_ID] that is generated automatically.
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
       
-        # The name of the group's parent, if it has one. The format is "projects/`
-        # project_id_or_number`/groups/`group_id`". For groups with no parent,
-        # parentName is the empty string, "".
+        # The name of the group's parent, if it has one. The format is:
+        # projects/[PROJECT_ID_OR_NUMBER]/groups/[GROUP_ID]
+        # For groups with no parent, parent_name is the empty string, "".
         # Corresponds to the JSON property `parentName`
         # @return [String]
         attr_accessor :parent_name
@@ -1489,10 +1518,10 @@ module Google
         # @return [String]
         attr_accessor :gcp_zone
       
-        # A unique resource name for this InternalChecker. The format is:projects/[
-        # PROJECT_ID]/internalCheckers/[INTERNAL_CHECKER_ID].[PROJECT_ID] is the
-        # Stackdriver Workspace project for the Uptime check config associated with the
-        # internal checker.
+        # A unique resource name for this InternalChecker. The format is:
+        # projects/[PROJECT_ID_OR_NUMBER]/internalCheckers/[INTERNAL_CHECKER_ID]
+        # [PROJECT_ID_OR_NUMBER] is the Stackdriver Workspace project for the Uptime
+        # check config associated with the internal checker.
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
@@ -1630,8 +1659,8 @@ module Google
         attr_accessor :alert_policies
       
         # If there might be more results than were returned, then this field is set to a
-        # non-empty value. To see the additional results, use that value as pageToken in
-        # the next call to this method.
+        # non-empty value. To see the additional results, use that value as page_token
+        # in the next call to this method.
         # Corresponds to the JSON property `nextPageToken`
         # @return [String]
         attr_accessor :next_page_token
@@ -1657,8 +1686,8 @@ module Google
         attr_accessor :members
       
         # If there are more results than have been returned, then this field is set to a
-        # non-empty value. To see the additional results, use that value as pageToken in
-        # the next call to this method.
+        # non-empty value. To see the additional results, use that value as page_token
+        # in the next call to this method.
         # Corresponds to the JSON property `nextPageToken`
         # @return [String]
         attr_accessor :next_page_token
@@ -1690,8 +1719,8 @@ module Google
         attr_accessor :group
       
         # If there are more results than have been returned, then this field is set to a
-        # non-empty value. To see the additional results, use that value as pageToken in
-        # the next call to this method.
+        # non-empty value. To see the additional results, use that value as page_token
+        # in the next call to this method.
         # Corresponds to the JSON property `nextPageToken`
         # @return [String]
         attr_accessor :next_page_token
@@ -1718,8 +1747,8 @@ module Google
         attr_accessor :metric_descriptors
       
         # If there are more results than have been returned, then this field is set to a
-        # non-empty value. To see the additional results, use that value as pageToken in
-        # the next call to this method.
+        # non-empty value. To see the additional results, use that value as page_token
+        # in the next call to this method.
         # Corresponds to the JSON property `nextPageToken`
         # @return [String]
         attr_accessor :next_page_token
@@ -1740,8 +1769,8 @@ module Google
         include Google::Apis::Core::Hashable
       
         # If there are more results than have been returned, then this field is set to a
-        # non-empty value. To see the additional results, use that value as pageToken in
-        # the next call to this method.
+        # non-empty value. To see the additional results, use that value as page_token
+        # in the next call to this method.
         # Corresponds to the JSON property `nextPageToken`
         # @return [String]
         attr_accessor :next_page_token
@@ -1823,8 +1852,8 @@ module Google
         include Google::Apis::Core::Hashable
       
         # If there are more results than have been returned, then this field is set to a
-        # non-empty value. To see the additional results, use that value as pageToken in
-        # the next call to this method.
+        # non-empty value. To see the additional results, use that value as page_token
+        # in the next call to this method.
         # Corresponds to the JSON property `nextPageToken`
         # @return [String]
         attr_accessor :next_page_token
@@ -1850,8 +1879,8 @@ module Google
         include Google::Apis::Core::Hashable
       
         # If there are more results than have been returned, then this field is set to a
-        # non-empty value. To see the additional results, use that value as pageToken in
-        # the next call to this method.
+        # non-empty value. To see the additional results, use that value as page_token
+        # in the next call to this method.
         # Corresponds to the JSON property `nextPageToken`
         # @return [String]
         attr_accessor :next_page_token
@@ -1883,8 +1912,8 @@ module Google
         attr_accessor :execution_errors
       
         # If there are more results than have been returned, then this field is set to a
-        # non-empty value. To see the additional results, use that value as pageToken in
-        # the next call to this method.
+        # non-empty value. To see the additional results, use that value as page_token
+        # in the next call to this method.
         # Corresponds to the JSON property `nextPageToken`
         # @return [String]
         attr_accessor :next_page_token
@@ -1972,6 +2001,40 @@ module Google
         end
       end
       
+      # Istio service scoped to an Istio mesh
+      class MeshIstio
+        include Google::Apis::Core::Hashable
+      
+        # Identifier for the mesh in which this Istio service is defined. Corresponds to
+        # the mesh_uid metric label in Istio metrics.
+        # Corresponds to the JSON property `meshUid`
+        # @return [String]
+        attr_accessor :mesh_uid
+      
+        # The name of the Istio service underlying this service. Corresponds to the
+        # destination_service_name metric label in Istio metrics.
+        # Corresponds to the JSON property `serviceName`
+        # @return [String]
+        attr_accessor :service_name
+      
+        # The namespace of the Istio service underlying this service. Corresponds to the
+        # destination_service_namespace metric label in Istio metrics.
+        # Corresponds to the JSON property `serviceNamespace`
+        # @return [String]
+        attr_accessor :service_namespace
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @mesh_uid = args[:mesh_uid] if args.key?(:mesh_uid)
+          @service_name = args[:service_name] if args.key?(:service_name)
+          @service_namespace = args[:service_namespace] if args.key?(:service_namespace)
+        end
+      end
+      
       # A specific metric, identified by specifying values for all of the labels of a
       # MetricDescriptor.
       class Metric
@@ -2123,6 +2186,43 @@ module Google
         # @return [String]
         attr_accessor :type
       
+        # The units in which the metric value is reported. It is only applicable if the
+        # value_type is INT64, DOUBLE, or DISTRIBUTION. The unit defines the
+        # representation of the stored metric values.Different systems may scale the
+        # values to be more easily displayed (so a value of 0.02KBy might be displayed
+        # as 20By, and a value of 3523KBy might be displayed as 3.5MBy). However, if the
+        # unit is KBy, then the value of the metric is always in thousands of bytes, no
+        # matter how it may be displayed..If you want a custom metric to record the
+        # exact number of CPU-seconds used by a job, you can create an INT64 CUMULATIVE
+        # metric whose unit is s`CPU` (or equivalently 1s`CPU` or just s). If the job
+        # uses 12,005 CPU-seconds, then the value is written as 12005.Alternatively, if
+        # you want a custom metric to record data in a more granular way, you can create
+        # a DOUBLE CUMULATIVE metric whose unit is ks`CPU`, and then write the value 12.
+        # 005 (which is 12005/1000), or use Kis`CPU` and write 11.723 (which is 12005/
+        # 1024).The supported units are a subset of The Unified Code for Units of
+        # Measure (http://unitsofmeasure.org/ucum.html) standard:Basic units (UNIT)
+        # bit bit
+        # By byte
+        # s second
+        # min minute
+        # h hour
+        # d dayPrefixes (PREFIX)
+        # k kilo (10^3)
+        # M mega (10^6)
+        # G giga (10^9)
+        # T tera (10^12)
+        # P peta (10^15)
+        # E exa (10^18)
+        # Z zetta (10^21)
+        # Y yotta (10^24)
+        # m milli (10^-3)
+        # u micro (10^-6)
+        # n nano (10^-9)
+        # p pico (10^-12)
+        # f femto (10^-15)
+        # a atto (10^-18)
+        # z zepto (10^-21)
+        # y yocto (10^-24)
         # Ki kibi (2^10)
         # Mi mebi (2^20)
         # Gi gibi (2^30)
@@ -2560,8 +2660,8 @@ module Google
         # @return [Hash<String,String>]
         attr_accessor :labels
       
-        # The full REST resource name for this channel. The syntax is:
-        # projects/[PROJECT_ID]/notificationChannels/[CHANNEL_ID]
+        # The full REST resource name for this channel. The format is:
+        # projects/[PROJECT_ID_OR_NUMBER]/notificationChannels/[CHANNEL_ID]
         # The [CHANNEL_ID] is automatically assigned by the server on creation.
         # Corresponds to the JSON property `name`
         # @return [String]
@@ -2642,19 +2742,18 @@ module Google
         # @return [Array<Google::Apis::MonitoringV3::LabelDescriptor>]
         attr_accessor :labels
       
-        # The full REST resource name for this descriptor. The syntax is:
-        # projects/[PROJECT_ID]/notificationChannelDescriptors/[TYPE]
+        # The product launch stage for channels of this type.
+        # Corresponds to the JSON property `launchStage`
+        # @return [String]
+        attr_accessor :launch_stage
+      
+        # The full REST resource name for this descriptor. The format is:
+        # projects/[PROJECT_ID_OR_NUMBER]/notificationChannelDescriptors/[TYPE]
         # In the above, [TYPE] is the value of the type field.
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
       
-        # The tiers that support this notification channel; the project service tier
-        # must be one of the supported_tiers.
-        # Corresponds to the JSON property `supportedTiers`
-        # @return [Array<String>]
-        attr_accessor :supported_tiers
-      
         # The type of notification channel, such as "email", "sms", etc. Notification
         # channel types are globally unique.
         # Corresponds to the JSON property `type`
@@ -2670,8 +2769,8 @@ module Google
           @description = args[:description] if args.key?(:description)
           @display_name = args[:display_name] if args.key?(:display_name)
           @labels = args[:labels] if args.key?(:labels)
+          @launch_stage = args[:launch_stage] if args.key?(:launch_stage)
           @name = args[:name] if args.key?(:name)
-          @supported_tiers = args[:supported_tiers] if args.key?(:supported_tiers)
           @type = args[:type] if args.key?(:type)
         end
       end
@@ -2851,7 +2950,7 @@ module Google
         include Google::Apis::Core::Hashable
       
         # The group of resources being monitored. Should be only the [GROUP_ID], and not
-        # the full-path projects/[PROJECT_ID]/groups/[GROUP_ID].
+        # the full-path projects/[PROJECT_ID_OR_NUMBER]/groups/[GROUP_ID].
         # Corresponds to the JSON property `groupId`
         # @return [String]
         attr_accessor :group_id
@@ -2902,7 +3001,8 @@ module Google
         # @return [Google::Apis::MonitoringV3::CloudEndpoints]
         attr_accessor :cloud_endpoints
       
-        # Istio service. Learn more at http://istio.io.
+        # Istio service scoped to a single Kubernetes cluster. Learn more at http://
+        # istio.io.
         # Corresponds to the JSON property `clusterIstio`
         # @return [Google::Apis::MonitoringV3::ClusterIstio]
         attr_accessor :cluster_istio
@@ -2918,8 +3018,13 @@ module Google
         # @return [String]
         attr_accessor :display_name
       
-        # Resource name for this Service. Of the form projects/`project_id`/services/`
-        # service_id`.
+        # Istio service scoped to an Istio mesh
+        # Corresponds to the JSON property `meshIstio`
+        # @return [Google::Apis::MonitoringV3::MeshIstio]
+        attr_accessor :mesh_istio
+      
+        # Resource name for this Service. The format is:
+        # projects/[PROJECT_ID_OR_NUMBER]/services/[SERVICE_ID`
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
@@ -2940,6 +3045,7 @@ module Google
           @cluster_istio = args[:cluster_istio] if args.key?(:cluster_istio)
           @custom = args[:custom] if args.key?(:custom)
           @display_name = args[:display_name] if args.key?(:display_name)
+          @mesh_istio = args[:mesh_istio] if args.key?(:mesh_istio)
           @name = args[:name] if args.key?(:name)
           @telemetry = args[:telemetry] if args.key?(:telemetry)
         end
@@ -3017,13 +3123,14 @@ module Google
         attr_accessor :display_name
       
         # The fraction of service that must be good in order for this objective to be
-        # met. 0 < goal <= 1.
+        # met. 0 < goal <= 0.999.
         # Corresponds to the JSON property `goal`
         # @return [Float]
         attr_accessor :goal
       
-        # Resource name for this ServiceLevelObjective. Of the form projects/`project_id`
-        # /services/`service_id`/serviceLevelObjectives/`slo_name`.
+        # Resource name for this ServiceLevelObjective. The format is:
+        # projects/[PROJECT_ID_OR_NUMBER]/services/[SERVICE_ID]/serviceLevelObjectives/[
+        # SLO_NAME]
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
@@ -3087,16 +3194,16 @@ module Google
         end
       end
       
-      # The context of a span, attached to google.api.Distribution.Exemplars in google.
-      # api.Distribution values during aggregation.It contains the name of a span with
-      # format:  projects/PROJECT_ID/traces/TRACE_ID/spans/SPAN_ID
+      # The context of a span, attached to Exemplars in Distribution values during
+      # aggregation.It contains the name of a span with format:
+      # projects/[PROJECT_ID_OR_NUMBER]/traces/[TRACE_ID]/spans/[SPAN_ID]
       class SpanContext
         include Google::Apis::Core::Hashable
       
-        # The resource name of the span in the following format:
-        # projects/[PROJECT_ID]/traces/[TRACE_ID]/spans/[SPAN_ID]
-        # TRACE_ID is a unique identifier for a trace within a project; it is a 32-
-        # character hexadecimal encoding of a 16-byte array.SPAN_ID is a unique
+        # The resource name of the span. The format is:
+        # projects/[PROJECT_ID_OR_NUMBER]/traces/[TRACE_ID]/spans/[SPAN_ID]
+        # [TRACE_ID] is a unique identifier for a trace within a project; it is a 32-
+        # character hexadecimal encoding of a 16-byte array.[SPAN_ID] is a unique
         # identifier for a span within a trace; it is a 16-character hexadecimal
         # encoding of an 8-byte array.
         # Corresponds to the JSON property `spanName`
@@ -3556,9 +3663,10 @@ module Google
         attr_accessor :monitored_resource
       
         # A unique resource name for this Uptime check configuration. The format is:
-        # projects/[PROJECT_ID]/uptimeCheckConfigs/[UPTIME_CHECK_ID].This field should
-        # be omitted when creating the Uptime check configuration; on create, the
-        # resource name is assigned by the server and included in the response.
+        # projects/[PROJECT_ID_OR_NUMBER]/uptimeCheckConfigs/[UPTIME_CHECK_ID]
+        # This field should be omitted when creating the Uptime check configuration; on
+        # create, the resource name is assigned by the server and included in the
+        # response.
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
@@ -3658,8 +3766,8 @@ module Google
       class VerifyNotificationChannelRequest
         include Google::Apis::Core::Hashable
       
-        # The verification code that was delivered to the channel as a result of
-        # invoking the SendNotificationChannelVerificationCode API method or that was
+        # Required. The verification code that was delivered to the channel as a result
+        # of invoking the SendNotificationChannelVerificationCode API method or that was
         # retrieved from a verified channel via GetNotificationChannelVerificationCode.
         # For example, one might have "G-123456" or "TKNZGhhd2EyN3I1MnRnMjRv" (in
         # general, one is only guaranteed that the code is valid UTF-8; one should not

data/generated/google/apis/monitoring_v3/representations.rb

@@ -328,6 +328,12 @@ module Google
         include Google::Apis::Core::JsonObjectSupport
       end
       
+      class MeshIstio
+        class Representation < Google::Apis::Core::JsonRepresentation; end
+      
+        include Google::Apis::Core::JsonObjectSupport
+      end
+      
       class Metric
         class Representation < Google::Apis::Core::JsonRepresentation; end
       
@@ -1050,6 +1056,15 @@ module Google
         end
       end
       
+      class MeshIstio
+        # @private
+        class Representation < Google::Apis::Core::JsonRepresentation
+          property :mesh_uid, as: 'meshUid'
+          property :service_name, as: 'serviceName'
+          property :service_namespace, as: 'serviceNamespace'
+        end
+      end
+      
       class Metric
         # @private
         class Representation < Google::Apis::Core::JsonRepresentation
@@ -1182,8 +1197,8 @@ module Google
           property :display_name, as: 'displayName'
           collection :labels, as: 'labels', class: Google::Apis::MonitoringV3::LabelDescriptor, decorator: Google::Apis::MonitoringV3::LabelDescriptor::Representation
       
+          property :launch_stage, as: 'launchStage'
           property :name, as: 'name'
-          collection :supported_tiers, as: 'supportedTiers'
           property :type, as: 'type'
         end
       end
@@ -1261,6 +1276,8 @@ module Google
           property :custom, as: 'custom', class: Google::Apis::MonitoringV3::Custom, decorator: Google::Apis::MonitoringV3::Custom::Representation
       
           property :display_name, as: 'displayName'
+          property :mesh_istio, as: 'meshIstio', class: Google::Apis::MonitoringV3::MeshIstio, decorator: Google::Apis::MonitoringV3::MeshIstio::Representation
+      
           property :name, as: 'name'
           property :telemetry, as: 'telemetry', class: Google::Apis::MonitoringV3::Telemetry, decorator: Google::Apis::MonitoringV3::Telemetry::Representation