google-api-client 0.36.0 → 0.37.0

data/generated/google/apis/monitoring_v1/classes.rb

@@ -22,57 +22,81 @@ module Google
   module Apis
     module MonitoringV1
       
-      # Describes how to combine multiple time series to provide different views of
-      # the data. Aggregation consists of an alignment step on individual time series (
-      # alignment_period and per_series_aligner) followed by an optional reduction
-      # step of the data across the aligned time series (cross_series_reducer and
-      # group_by_fields). For more details, see Aggregation.
+      # Describes how to combine multiple time series to provide a different view of
+      # the data. Aggregation of time series is done in two steps. First, each time
+      # series in the set is aligned to the same time interval boundaries, then the
+      # set of time series is optionally reduced in number.Alignment consists of
+      # applying the per_series_aligner operation to each time series after its data
+      # has been divided into regular alignment_period time intervals. This process
+      # takes all of the data points in an alignment period, applies a mathematical
+      # transformation such as averaging, minimum, maximum, delta, etc., and converts
+      # them into a single data point per period.Reduction is when the aligned and
+      # transformed time series can optionally be combined, reducing the number of
+      # time series through similar mathematical transformations. Reduction involves
+      # applying a cross_series_reducer to all the time series, optionally sorting the
+      # time series into subsets with group_by_fields, and applying the reducer to
+      # each subset.The raw time series data can contain a huge amount of information
+      # from multiple sources. Alignment and reduction transforms this mass of data
+      # into a more manageable and representative collection of data, for example "the
+      # 95% latency across the average of all tasks in a cluster". This representative
+      # data can be more easily graphed and comprehended, and the individual time
+      # series data is still available for later drilldown. For more details, see
+      # Aggregating Time Series.
       class Aggregation
         include Google::Apis::Core::Hashable
       
-        # The alignment period for per-time series alignment. If present,
-        # alignmentPeriod must be at least 60 seconds. After per-time series alignment,
-        # each time series will contain data points only on the period boundaries. If
-        # perSeriesAligner is not specified or equals ALIGN_NONE, then this field is
-        # ignored. If perSeriesAligner is specified and does not equal ALIGN_NONE, then
-        # this field must be defined; otherwise an error is returned.
+        # The alignment_period specifies a time interval, in seconds, that is used to
+        # divide the data in all the time series into consistent blocks of time. This
+        # will be done before the per-series aligner can be applied to the data.The
+        # value must be at least 60 seconds. If a per-series aligner other than
+        # ALIGN_NONE is specified, this field is required or an error is returned. If no
+        # per-series aligner is specified, or the aligner ALIGN_NONE is specified, then
+        # this field is ignored.
         # Corresponds to the JSON property `alignmentPeriod`
         # @return [String]
         attr_accessor :alignment_period
       
-        # The approach to be used to combine time series. Not all reducer functions may
-        # be applied to all time series, depending on the metric type and the value type
-        # of the original time series. Reduction may change the metric type of value
-        # type of the time series.Time series data must be aligned in order to perform
-        # cross-time series reduction. If crossSeriesReducer is specified, then
-        # perSeriesAligner must be specified and not equal ALIGN_NONE and
-        # alignmentPeriod must be specified; otherwise, an error is returned.
+        # The reduction operation to be used to combine time series into a single time
+        # series, where the value of each data point in the resulting series is a
+        # function of all the already aligned values in the input time series.Not all
+        # reducer operations can be applied to all time series. The valid choices depend
+        # on the metric_kind and the value_type of the original time series. Reduction
+        # can yield a time series with a different metric_kind or value_type than the
+        # input time series.Time series data must first be aligned (see
+        # per_series_aligner) in order to perform cross-time series reduction. If
+        # cross_series_reducer is specified, then per_series_aligner must be specified,
+        # and must not be ALIGN_NONE. An alignment_period must also be specified;
+        # otherwise, an error is returned.
         # Corresponds to the JSON property `crossSeriesReducer`
         # @return [String]
         attr_accessor :cross_series_reducer
       
-        # The set of fields to preserve when crossSeriesReducer is specified. The
-        # groupByFields determine how the time series are partitioned into subsets prior
-        # to applying the aggregation function. Each subset contains time series that
-        # have the same value for each of the grouping fields. Each individual time
-        # series is a member of exactly one subset. The crossSeriesReducer is applied to
-        # each subset of time series. It is not possible to reduce across different
+        # The set of fields to preserve when cross_series_reducer is specified. The
+        # group_by_fields determine how the time series are partitioned into subsets
+        # prior to applying the aggregation operation. Each subset contains time series
+        # that have the same value for each of the grouping fields. Each individual time
+        # series is a member of exactly one subset. The cross_series_reducer is applied
+        # to each subset of time series. It is not possible to reduce across different
         # resource types, so this field implicitly contains resource.type. Fields not
-        # specified in groupByFields are aggregated away. If groupByFields is not
+        # specified in group_by_fields are aggregated away. If group_by_fields is not
         # specified and all the time series have the same resource type, then the time
-        # series are aggregated into a single output time series. If crossSeriesReducer
-        # is not defined, this field is ignored.
+        # series are aggregated into a single output time series. If
+        # cross_series_reducer is not defined, this field is ignored.
         # Corresponds to the JSON property `groupByFields`
         # @return [Array<String>]
         attr_accessor :group_by_fields
       
-        # The approach to be used to align individual time series. Not all alignment
-        # functions may be applied to all time series, depending on the metric type and
-        # value type of the original time series. Alignment may change the metric type
-        # or the value type of the time series.Time series data must be aligned in order
-        # to perform cross-time series reduction. If crossSeriesReducer is specified,
-        # then perSeriesAligner must be specified and not equal ALIGN_NONE and
-        # alignmentPeriod must be specified; otherwise, an error is returned.
+        # An Aligner describes how to bring the data points in a single time series into
+        # temporal alignment. Except for ALIGN_NONE, all alignments cause all the data
+        # points in an alignment_period to be mathematically grouped together, resulting
+        # in a single data point for each alignment_period with end timestamp at the end
+        # of the period.Not all alignment operations may be applied to all time series.
+        # The valid choices depend on the metric_kind and value_type of the original
+        # time series. Alignment can change the metric_kind or the value_type of the
+        # time series.Time series data must be aligned in order to perform cross-time
+        # series reduction. If cross_series_reducer is specified, then
+        # per_series_aligner must be specified and not equal to ALIGN_NONE and
+        # alignment_period must be specified; otherwise, an error is returned.
         # Corresponds to the JSON property `perSeriesAligner`
         # @return [String]
         attr_accessor :per_series_aligner
@@ -139,8 +163,9 @@ module Google
         include Google::Apis::Core::Hashable
       
         # The relative weight of this column. The column weight is used to adjust the
-        # height of rows on the screen (relative to peers). If omitted, a value of 1 is
-        # used.
+        # width of columns on the screen (relative to peers). Greater the weight,
+        # greater the width of the column on the screen. If omitted, a value of 1 is
+        # used while rendering.
         # Corresponds to the JSON property `weight`
         # @return [Fixnum]
         attr_accessor :weight
@@ -250,10 +275,11 @@ module Google
         # @return [String]
         attr_accessor :legend_template
       
-        # Optional. The lower bound on data point frequency for this data set
+        # Optional. The lower bound on data point frequency for this data set,
         # implemented by specifying the minimum alignment period to use in a time series
-        # query. For example, if the data is published once every 10 minutes it would
-        # not make sense to fetch and align data at one minute intervals.
+        # query For example, if the data is published once every 10 minutes, the
+        # min_alignment_period should be at least 10 minutes. It would not make sense to
+        # fetch and align data at one minute intervals.
         # Corresponds to the JSON property `minAlignmentPeriod`
         # @return [String]
         attr_accessor :min_alignment_period
@@ -441,7 +467,7 @@ module Google
         include Google::Apis::Core::Hashable
       
         # The number of columns into which the view's width is divided. If omitted or
-        # set to zero, a system default will be used.
+        # set to zero, a system default will be used while rendering.
         # Corresponds to the JSON property `columns`
         # @return [Fixnum]
         attr_accessor :columns
@@ -472,8 +498,8 @@ module Google
         attr_accessor :dashboards
       
         # If there are more results than have been returned, then this field is set to a
-        # non-empty value. To see the additional results, use that value as pageToken in
-        # the next call to this method.
+        # non-empty value. To see the additional results, use that value as page_token
+        # in the next call to this method.
         # Corresponds to the JSON property `nextPageToken`
         # @return [String]
         attr_accessor :next_page_token
@@ -522,8 +548,11 @@ module Google
       end
       
       # Describes a ranking-based time series filter. Each input time series is ranked
-      # with an aligner. The filter lets through up to num_time_series time series,
-      # selecting them based on the relative ranking.
+      # with an aligner. The filter will allow up to num_time_series time series to
+      # pass through it, selecting them based on the relative ranking.For example, if
+      # ranking_method is METHOD_MEAN,direction is BOTTOM, and num_time_series is 3,
+      # then the 3 times series with the lowest mean values will pass through the
+      # filter.
       class PickTimeSeriesFilter
         include Google::Apis::Core::Hashable
       
@@ -532,12 +561,12 @@ module Google
         # @return [String]
         attr_accessor :direction
       
-        # How many time series to return.
+        # How many time series to allow to pass through the filter.
         # Corresponds to the JSON property `numTimeSeries`
         # @return [Fixnum]
         attr_accessor :num_time_series
       
-        # rankingMethod is applied to each time series independently to produce the
+        # ranking_method is applied to each time series independently to produce the
         # value which will be used to compare the time series to other time series.
         # Corresponds to the JSON property `rankingMethod`
         # @return [String]
@@ -560,11 +589,26 @@ module Google
       class RatioPart
         include Google::Apis::Core::Hashable
       
-        # Describes how to combine multiple time series to provide different views of
-        # the data. Aggregation consists of an alignment step on individual time series (
-        # alignment_period and per_series_aligner) followed by an optional reduction
-        # step of the data across the aligned time series (cross_series_reducer and
-        # group_by_fields). For more details, see Aggregation.
+        # Describes how to combine multiple time series to provide a different view of
+        # the data. Aggregation of time series is done in two steps. First, each time
+        # series in the set is aligned to the same time interval boundaries, then the
+        # set of time series is optionally reduced in number.Alignment consists of
+        # applying the per_series_aligner operation to each time series after its data
+        # has been divided into regular alignment_period time intervals. This process
+        # takes all of the data points in an alignment period, applies a mathematical
+        # transformation such as averaging, minimum, maximum, delta, etc., and converts
+        # them into a single data point per period.Reduction is when the aligned and
+        # transformed time series can optionally be combined, reducing the number of
+        # time series through similar mathematical transformations. Reduction involves
+        # applying a cross_series_reducer to all the time series, optionally sorting the
+        # time series into subsets with group_by_fields, and applying the reducer to
+        # each subset.The raw time series data can contain a huge amount of information
+        # from multiple sources. Alignment and reduction transforms this mass of data
+        # into a more manageable and representative collection of data, for example "the
+        # 95% latency across the average of all tasks in a cluster". This representative
+        # data can be more easily graphed and comprehended, and the individual time
+        # series data is still available for later drilldown. For more details, see
+        # Aggregating Time Series.
         # Corresponds to the JSON property `aggregation`
         # @return [Google::Apis::MonitoringV1::Aggregation]
         attr_accessor :aggregation
@@ -591,7 +635,9 @@ module Google
         include Google::Apis::Core::Hashable
       
         # The relative weight of this row. The row weight is used to adjust the height
-        # of rows on the screen (relative to peers). If omitted, a value of 1 is used.
+        # of rows on the screen (relative to peers). Greater the weight, greater the
+        # height of the row on the screen. If omitted, a value of 1 is used while
+        # rendering.
         # Corresponds to the JSON property `weight`
         # @return [Fixnum]
         attr_accessor :weight
@@ -710,16 +756,16 @@ module Google
         end
       end
       
-      # The context of a span, attached to google.api.Distribution.Exemplars in google.
-      # api.Distribution values during aggregation.It contains the name of a span with
-      # format:  projects/PROJECT_ID/traces/TRACE_ID/spans/SPAN_ID
+      # The context of a span, attached to Exemplars in Distribution values during
+      # aggregation.It contains the name of a span with format:
+      # projects/[PROJECT_ID_OR_NUMBER]/traces/[TRACE_ID]/spans/[SPAN_ID]
       class SpanContext
         include Google::Apis::Core::Hashable
       
-        # The resource name of the span in the following format:
-        # projects/[PROJECT_ID]/traces/[TRACE_ID]/spans/[SPAN_ID]
-        # TRACE_ID is a unique identifier for a trace within a project; it is a 32-
-        # character hexadecimal encoding of a 16-byte array.SPAN_ID is a unique
+        # The resource name of the span. The format is:
+        # projects/[PROJECT_ID_OR_NUMBER]/traces/[TRACE_ID]/spans/[SPAN_ID]
+        # [TRACE_ID] is a unique identifier for a trace within a project; it is a 32-
+        # character hexadecimal encoding of a 16-byte array.[SPAN_ID] is a unique
         # identifier for a span within a trace; it is a 16-character hexadecimal
         # encoding of an 8-byte array.
         # Corresponds to the JSON property `spanName`
@@ -767,35 +813,6 @@ module Google
         end
       end
       
-      # A filter that ranks streams based on their statistical relation to other
-      # streams in a request.
-      class StatisticalTimeSeriesFilter
-        include Google::Apis::Core::Hashable
-      
-        # How many time series to output.
-        # Corresponds to the JSON property `numTimeSeries`
-        # @return [Fixnum]
-        attr_accessor :num_time_series
-      
-        # rankingMethod is applied to a set of time series, and then the produced value
-        # for each individual time series is used to compare a given time series to
-        # others. These are methods that cannot be applied stream-by-stream, but rather
-        # require the full context of a request to evaluate time series.
-        # Corresponds to the JSON property `rankingMethod`
-        # @return [String]
-        attr_accessor :ranking_method
-      
-        def initialize(**args)
-           update!(**args)
-        end
-      
-        # Update properties of this object
-        def update!(**args)
-          @num_time_series = args[:num_time_series] if args.key?(:num_time_series)
-          @ranking_method = args[:ranking_method] if args.key?(:ranking_method)
-        end
-      end
-      
       # A widget that displays textual content.
       class Text
         include Google::Apis::Core::Hashable
@@ -864,11 +881,26 @@ module Google
       class TimeSeriesFilter
         include Google::Apis::Core::Hashable
       
-        # Describes how to combine multiple time series to provide different views of
-        # the data. Aggregation consists of an alignment step on individual time series (
-        # alignment_period and per_series_aligner) followed by an optional reduction
-        # step of the data across the aligned time series (cross_series_reducer and
-        # group_by_fields). For more details, see Aggregation.
+        # Describes how to combine multiple time series to provide a different view of
+        # the data. Aggregation of time series is done in two steps. First, each time
+        # series in the set is aligned to the same time interval boundaries, then the
+        # set of time series is optionally reduced in number.Alignment consists of
+        # applying the per_series_aligner operation to each time series after its data
+        # has been divided into regular alignment_period time intervals. This process
+        # takes all of the data points in an alignment period, applies a mathematical
+        # transformation such as averaging, minimum, maximum, delta, etc., and converts
+        # them into a single data point per period.Reduction is when the aligned and
+        # transformed time series can optionally be combined, reducing the number of
+        # time series through similar mathematical transformations. Reduction involves
+        # applying a cross_series_reducer to all the time series, optionally sorting the
+        # time series into subsets with group_by_fields, and applying the reducer to
+        # each subset.The raw time series data can contain a huge amount of information
+        # from multiple sources. Alignment and reduction transforms this mass of data
+        # into a more manageable and representative collection of data, for example "the
+        # 95% latency across the average of all tasks in a cluster". This representative
+        # data can be more easily graphed and comprehended, and the individual time
+        # series data is still available for later drilldown. For more details, see
+        # Aggregating Time Series.
         # Corresponds to the JSON property `aggregation`
         # @return [Google::Apis::MonitoringV1::Aggregation]
         attr_accessor :aggregation
@@ -880,18 +912,15 @@ module Google
         attr_accessor :filter
       
         # Describes a ranking-based time series filter. Each input time series is ranked
-        # with an aligner. The filter lets through up to num_time_series time series,
-        # selecting them based on the relative ranking.
+        # with an aligner. The filter will allow up to num_time_series time series to
+        # pass through it, selecting them based on the relative ranking.For example, if
+        # ranking_method is METHOD_MEAN,direction is BOTTOM, and num_time_series is 3,
+        # then the 3 times series with the lowest mean values will pass through the
+        # filter.
         # Corresponds to the JSON property `pickTimeSeriesFilter`
         # @return [Google::Apis::MonitoringV1::PickTimeSeriesFilter]
         attr_accessor :pick_time_series_filter
       
-        # A filter that ranks streams based on their statistical relation to other
-        # streams in a request.
-        # Corresponds to the JSON property `statisticalTimeSeriesFilter`
-        # @return [Google::Apis::MonitoringV1::StatisticalTimeSeriesFilter]
-        attr_accessor :statistical_time_series_filter
-      
         def initialize(**args)
            update!(**args)
         end
@@ -901,7 +930,6 @@ module Google
           @aggregation = args[:aggregation] if args.key?(:aggregation)
           @filter = args[:filter] if args.key?(:filter)
           @pick_time_series_filter = args[:pick_time_series_filter] if args.key?(:pick_time_series_filter)
-          @statistical_time_series_filter = args[:statistical_time_series_filter] if args.key?(:statistical_time_series_filter)
         end
       end
       
@@ -924,27 +952,39 @@ module Google
         attr_accessor :numerator
       
         # Describes a ranking-based time series filter. Each input time series is ranked
-        # with an aligner. The filter lets through up to num_time_series time series,
-        # selecting them based on the relative ranking.
+        # with an aligner. The filter will allow up to num_time_series time series to
+        # pass through it, selecting them based on the relative ranking.For example, if
+        # ranking_method is METHOD_MEAN,direction is BOTTOM, and num_time_series is 3,
+        # then the 3 times series with the lowest mean values will pass through the
+        # filter.
         # Corresponds to the JSON property `pickTimeSeriesFilter`
         # @return [Google::Apis::MonitoringV1::PickTimeSeriesFilter]
         attr_accessor :pick_time_series_filter
       
-        # Describes how to combine multiple time series to provide different views of
-        # the data. Aggregation consists of an alignment step on individual time series (
-        # alignment_period and per_series_aligner) followed by an optional reduction
-        # step of the data across the aligned time series (cross_series_reducer and
-        # group_by_fields). For more details, see Aggregation.
+        # Describes how to combine multiple time series to provide a different view of
+        # the data. Aggregation of time series is done in two steps. First, each time
+        # series in the set is aligned to the same time interval boundaries, then the
+        # set of time series is optionally reduced in number.Alignment consists of
+        # applying the per_series_aligner operation to each time series after its data
+        # has been divided into regular alignment_period time intervals. This process
+        # takes all of the data points in an alignment period, applies a mathematical
+        # transformation such as averaging, minimum, maximum, delta, etc., and converts
+        # them into a single data point per period.Reduction is when the aligned and
+        # transformed time series can optionally be combined, reducing the number of
+        # time series through similar mathematical transformations. Reduction involves
+        # applying a cross_series_reducer to all the time series, optionally sorting the
+        # time series into subsets with group_by_fields, and applying the reducer to
+        # each subset.The raw time series data can contain a huge amount of information
+        # from multiple sources. Alignment and reduction transforms this mass of data
+        # into a more manageable and representative collection of data, for example "the
+        # 95% latency across the average of all tasks in a cluster". This representative
+        # data can be more easily graphed and comprehended, and the individual time
+        # series data is still available for later drilldown. For more details, see
+        # Aggregating Time Series.
         # Corresponds to the JSON property `secondaryAggregation`
         # @return [Google::Apis::MonitoringV1::Aggregation]
         attr_accessor :secondary_aggregation
       
-        # A filter that ranks streams based on their statistical relation to other
-        # streams in a request.
-        # Corresponds to the JSON property `statisticalTimeSeriesFilter`
-        # @return [Google::Apis::MonitoringV1::StatisticalTimeSeriesFilter]
-        attr_accessor :statistical_time_series_filter
-      
         def initialize(**args)
            update!(**args)
         end
@@ -955,7 +995,6 @@ module Google
           @numerator = args[:numerator] if args.key?(:numerator)
           @pick_time_series_filter = args[:pick_time_series_filter] if args.key?(:pick_time_series_filter)
           @secondary_aggregation = args[:secondary_aggregation] if args.key?(:secondary_aggregation)
-          @statistical_time_series_filter = args[:statistical_time_series_filter] if args.key?(:statistical_time_series_filter)
         end
       end
       
@@ -1116,10 +1155,10 @@ module Google
         # @return [Array<Google::Apis::MonitoringV1::Threshold>]
         attr_accessor :thresholds
       
-        # The duration used to display a comparison chart. A comparison chart shows
-        # values from two time periods simultaneously (e.g., week-over-week metrics).
-        # The duration must be positive, and it can only be applied to charts with data
-        # sets of LINE plot type.
+        # The duration used to display a comparison chart. A comparison chart
+        # simultaneously shows values from two similar-length time periods (e.g., week-
+        # over-week metrics). The duration must be positive, and it can only be applied
+        # to charts with data sets of LINE plot type.
         # Corresponds to the JSON property `timeshiftDuration`
         # @return [String]
         attr_accessor :timeshift_duration

data/generated/google/apis/monitoring_v1/representations.rb

@@ -154,12 +154,6 @@ module Google
         include Google::Apis::Core::JsonObjectSupport
       end
       
-      class StatisticalTimeSeriesFilter
-        class Representation < Google::Apis::Core::JsonRepresentation; end
-      
-        include Google::Apis::Core::JsonObjectSupport
-      end
-      
       class Text
         class Representation < Google::Apis::Core::JsonRepresentation; end
       
@@ -411,14 +405,6 @@ module Google
         end
       end
       
-      class StatisticalTimeSeriesFilter
-        # @private
-        class Representation < Google::Apis::Core::JsonRepresentation
-          property :num_time_series, as: 'numTimeSeries'
-          property :ranking_method, as: 'rankingMethod'
-        end
-      end
-      
       class Text
         # @private
         class Representation < Google::Apis::Core::JsonRepresentation
@@ -445,8 +431,6 @@ module Google
           property :filter, as: 'filter'
           property :pick_time_series_filter, as: 'pickTimeSeriesFilter', class: Google::Apis::MonitoringV1::PickTimeSeriesFilter, decorator: Google::Apis::MonitoringV1::PickTimeSeriesFilter::Representation
       
-          property :statistical_time_series_filter, as: 'statisticalTimeSeriesFilter', class: Google::Apis::MonitoringV1::StatisticalTimeSeriesFilter, decorator: Google::Apis::MonitoringV1::StatisticalTimeSeriesFilter::Representation
-      
         end
       end
       
@@ -461,8 +445,6 @@ module Google
       
           property :secondary_aggregation, as: 'secondaryAggregation', class: Google::Apis::MonitoringV1::Aggregation, decorator: Google::Apis::MonitoringV1::Aggregation::Representation
       
-          property :statistical_time_series_filter, as: 'statisticalTimeSeriesFilter', class: Google::Apis::MonitoringV1::StatisticalTimeSeriesFilter, decorator: Google::Apis::MonitoringV1::StatisticalTimeSeriesFilter::Representation
-      
         end
       end
       

data/generated/google/apis/monitoring_v1/service.rb

@@ -56,9 +56,9 @@ module Google
         # create permission on the specified project. For more information, see Google
         # Cloud IAM (https://cloud.google.com/iam).
         # @param [String] parent
-        #   The project on which to execute the request. The format is "projects/`
-        #   project_id_or_number`". The `project_id_or_number` must match the dashboard
-        #   resource name.
+        #   Required. The project on which to execute the request. The format is:
+        #   projects/[PROJECT_ID_OR_NUMBER]
+        #   The [PROJECT_ID_OR_NUMBER] must match the dashboard resource name.
         # @param [Google::Apis::MonitoringV1::Dashboard] dashboard_object
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
@@ -93,8 +93,8 @@ module Google
         # dashboards.delete permission on the specified dashboard. For more information,
         # see Google Cloud IAM (https://cloud.google.com/iam).
         # @param [String] name
-        #   The resource name of the Dashboard. The format is "projects/`
-        #   project_id_or_number`/dashboards/`dashboard_id`".
+        #   Required. The resource name of the Dashboard. The format is:
+        #   projects/[PROJECT_ID_OR_NUMBER]/dashboards/[DASHBOARD_ID]
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -126,9 +126,10 @@ module Google
         # get permission on the specified dashboard. For more information, see Google
         # Cloud IAM (https://cloud.google.com/iam).
         # @param [String] name
-        #   The resource name of the Dashboard. The format is one of "dashboards/`
-        #   dashboard_id`" (for system dashboards) or "projects/`project_id_or_number`/
-        #   dashboards/`dashboard_id`" (for custom dashboards).
+        #   Required. The resource name of the Dashboard. The format is one of:
+        #   dashboards/[DASHBOARD_ID] (for system dashboards)
+        #   projects/[PROJECT_ID_OR_NUMBER]/dashboards/[DASHBOARD_ID]  (for custom
+        #   dashboards).
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -160,8 +161,8 @@ module Google
         # list permission on the specified project. For more information, see Google
         # Cloud IAM (https://cloud.google.com/iam).
         # @param [String] parent
-        #   The scope of the dashboards to list. A project scope must be specified in the
-        #   form of "projects/`project_id_or_number`".
+        #   Required. The scope of the dashboards to list. The format is:
+        #   projects/[PROJECT_ID_OR_NUMBER]
         # @param [Fixnum] page_size
         #   A positive number that is the maximum number of results to return. If
         #   unspecified, a default of 1000 is used.

data/generated/google/apis/monitoring_v1.rb

@@ -30,7 +30,7 @@ module Google
     # @see https://cloud.google.com/monitoring/api/
     module MonitoringV1
       VERSION = 'V1'
-      REVISION = '20191202'
+      REVISION = '20200210'
 
       # View and manage your data across Google Cloud Platform services
       AUTH_CLOUD_PLATFORM = 'https://www.googleapis.com/auth/cloud-platform'