gist 3.1.1 → 4.0.0

data/lib/gist/cacert.pem

@@ -1,105 +0,0 @@
----
-Certificate chain
- 0 s:/C=US/ST=California/L=San Francisco/O=GitHub, Inc./CN=*.github.com
-   i:/C=US/O=DigiCert Inc/OU=www.digicert.com/CN=DigiCert High Assurance CA-3
------BEGIN CERTIFICATE-----
-MIIGpjCCBY6gAwIBAgIQCc4q8gtIK3iiFj+bqb1z9jANBgkqhkiG9w0BAQUFADBm
-MQswCQYDVQQGEwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYDVQQLExB3
-d3cuZGlnaWNlcnQuY29tMSUwIwYDVQQDExxEaWdpQ2VydCBIaWdoIEFzc3VyYW5j
-ZSBDQS0zMB4XDTEyMDQzMDAwMDAwMFoXDTE0MDcwOTEyMDAwMFowaDELMAkGA1UE
-BhMCVVMxEzARBgNVBAgTCkNhbGlmb3JuaWExFjAUBgNVBAcTDVNhbiBGcmFuY2lz
-Y28xFTATBgNVBAoTDEdpdEh1YiwgSW5jLjEVMBMGA1UEAwwMKi5naXRodWIuY29t
-MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA70XN+uwT7z4M04aFUwEJ
-ypo6Tlr5gMvBvVFQnJlEqM3rYeqVHU8wU8af1tNV7dE6OkPpbdQ3yYgT2kWOXJnw
-gR16Bzbqsd8OPGAFkKIS2zVm1uB3qKN5UaZTEE83vEbjjtwQE5OZDWqzEB2HFN14
-YHtUezSp8unjO19RtWqnYiC/neEqdX2UJFJKjc0tm1yWL9jf6P04vYCsEWBh57O3
-v4GugyHJ63SI8n0RZgNCX6dV9OwAq/Eju1qr+8p8E6sojA7BIvmUJMoGpNKoRtbU
-RhjlzyG2udbZUYY5UGYEqQZgDx1vqKCbgq9xQ2RVd6ZWsW017HyvSK0BLnYtFubX
-wQIDAQABo4IDTDCCA0gwHwYDVR0jBBgwFoAUUOpzidsp+xCPnuUBINTeeZlIg/cw
-HQYDVR0OBBYEFIFnymFWE2hKxPmD1vRNyJ+hiKP6MCMGA1UdEQQcMBqCDCouZ2l0
-aHViLmNvbYIKZ2l0aHViLmNvbTAOBgNVHQ8BAf8EBAMCBaAwHQYDVR0lBBYwFAYI
-KwYBBQUHAwEGCCsGAQUFBwMCMF8GA1UdHwRYMFYwKaAnoCWGI2h0dHA6Ly9jcmwz
-LmRpZ2ljZXJ0LmNvbS9jYTMtZzguY3JsMCmgJ6AlhiNodHRwOi8vY3JsNC5kaWdp
-Y2VydC5jb20vY2EzLWc4LmNybDCCAcQGA1UdIASCAbswggG3MIIBswYJYIZIAYb9
-bAEBMIIBpDA6BggrBgEFBQcCARYuaHR0cDovL3d3dy5kaWdpY2VydC5jb20vc3Ns
-LWNwcy1yZXBvc2l0b3J5Lmh0bTCCAWQGCCsGAQUFBwICMIIBVh6CAVIAQQBuAHkA
-IAB1AHMAZQAgAG8AZgAgAHQAaABpAHMAIABDAGUAcgB0AGkAZgBpAGMAYQB0AGUA
-IABjAG8AbgBzAHQAaQB0AHUAdABlAHMAIABhAGMAYwBlAHAAdABhAG4AYwBlACAA
-bwBmACAAdABoAGUAIABEAGkAZwBpAEMAZQByAHQAIABDAFAALwBDAFAAUwAgAGEA
-bgBkACAAdABoAGUAIABSAGUAbAB5AGkAbgBnACAAUABhAHIAdAB5ACAAQQBnAHIA
-ZQBlAG0AZQBuAHQAIAB3AGgAaQBjAGgAIABsAGkAbQBpAHQAIABsAGkAYQBiAGkA
-bABpAHQAeQAgAGEAbgBkACAAYQByAGUAIABpAG4AYwBvAHIAcABvAHIAYQB0AGUA
-ZAAgAGgAZQByAGUAaQBuACAAYgB5ACAAcgBlAGYAZQByAGUAbgBjAGUALjB7Bggr
-BgEFBQcBAQRvMG0wJAYIKwYBBQUHMAGGGGh0dHA6Ly9vY3NwLmRpZ2ljZXJ0LmNv
-bTBFBggrBgEFBQcwAoY5aHR0cDovL2NhY2VydHMuZGlnaWNlcnQuY29tL0RpZ2lD
-ZXJ0SGlnaEFzc3VyYW5jZUNBLTMuY3J0MAwGA1UdEwEB/wQCMAAwDQYJKoZIhvcN
-AQEFBQADggEBABArBePXElSsd5Ec5IIqfb7MBAafKK1jbFstNTyf175xDJAUPh3p
-5fsB72UOpm1rdfn5/aDc1rgTKiL3t+1ALcHvyIhaxkf2pe39W9zN2bAy0Yx+sSOf
-GEi0LHMfzeDkmaeHrQXUjWBQoE4QOIon7AoBsylNK6gbsLryiab0rJ565/BEhC16
-BfZt0XgSRJHF18enz5vjf2fK6CgtM1poVVEPdxfr9qxdJ7A9MBBw+OcB+JwWdE89
-IzV94FOVPClMm1G87wcFx0cIqYvA3j8g6UvIOeG63PWLmXhAeHCGmVEoIjQz96S/
-Ox6cL5JR0RfxxBvKCzONM8XS2pU1dvUlcpw=
------END CERTIFICATE-----
- 1 s:/C=US/O=DigiCert Inc/OU=www.digicert.com/CN=DigiCert High Assurance CA-3
-   i:/C=US/O=DigiCert Inc/OU=www.digicert.com/CN=DigiCert High Assurance EV Root CA
------BEGIN CERTIFICATE-----
-MIIGWDCCBUCgAwIBAgIQCl8RTQNbF5EX0u/UA4w/OzANBgkqhkiG9w0BAQUFADBs
-MQswCQYDVQQGEwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYDVQQLExB3
-d3cuZGlnaWNlcnQuY29tMSswKQYDVQQDEyJEaWdpQ2VydCBIaWdoIEFzc3VyYW5j
-ZSBFViBSb290IENBMB4XDTA4MDQwMjEyMDAwMFoXDTIyMDQwMzAwMDAwMFowZjEL
-MAkGA1UEBhMCVVMxFTATBgNVBAoTDERpZ2lDZXJ0IEluYzEZMBcGA1UECxMQd3d3
-LmRpZ2ljZXJ0LmNvbTElMCMGA1UEAxMcRGlnaUNlcnQgSGlnaCBBc3N1cmFuY2Ug
-Q0EtMzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAL9hCikQH17+NDdR
-CPge+yLtYb4LDXBMUGMmdRW5QYiXtvCgFbsIYOBC6AUpEIc2iihlqO8xB3RtNpcv
-KEZmBMcqeSZ6mdWOw21PoF6tvD2Rwll7XjZswFPPAAgyPhBkWBATaccM7pxCUQD5
-BUTuJM56H+2MEb0SqPMV9Bx6MWkBG6fmXcCabH4JnudSREoQOiPkm7YDr6ictFuf
-1EutkozOtREqqjcYjbTCuNhcBoz4/yO9NV7UfD5+gw6RlgWYw7If48hl66l7XaAs
-zPw82W3tzPpLQ4zJ1LilYRyyQLYoEt+5+F/+07LJ7z20Hkt8HEyZNp496+ynaF4d
-32duXvsCAwEAAaOCAvowggL2MA4GA1UdDwEB/wQEAwIBhjCCAcYGA1UdIASCAb0w
-ggG5MIIBtQYLYIZIAYb9bAEDAAIwggGkMDoGCCsGAQUFBwIBFi5odHRwOi8vd3d3
-LmRpZ2ljZXJ0LmNvbS9zc2wtY3BzLXJlcG9zaXRvcnkuaHRtMIIBZAYIKwYBBQUH
-AgIwggFWHoIBUgBBAG4AeQAgAHUAcwBlACAAbwBmACAAdABoAGkAcwAgAEMAZQBy
-AHQAaQBmAGkAYwBhAHQAZQAgAGMAbwBuAHMAdABpAHQAdQB0AGUAcwAgAGEAYwBj
-AGUAcAB0AGEAbgBjAGUAIABvAGYAIAB0AGgAZQAgAEQAaQBnAGkAQwBlAHIAdAAg
-AEMAUAAvAEMAUABTACAAYQBuAGQAIAB0AGgAZQAgAFIAZQBsAHkAaQBuAGcAIABQ
-AGEAcgB0AHkAIABBAGcAcgBlAGUAbQBlAG4AdAAgAHcAaABpAGMAaAAgAGwAaQBt
-AGkAdAAgAGwAaQBhAGIAaQBsAGkAdAB5ACAAYQBuAGQAIABhAHIAZQAgAGkAbgBj
-AG8AcgBwAG8AcgBhAHQAZQBkACAAaABlAHIAZQBpAG4AIABiAHkAIAByAGUAZgBl
-AHIAZQBuAGMAZQAuMBIGA1UdEwEB/wQIMAYBAf8CAQAwNAYIKwYBBQUHAQEEKDAm
-MCQGCCsGAQUFBzABhhhodHRwOi8vb2NzcC5kaWdpY2VydC5jb20wgY8GA1UdHwSB
-hzCBhDBAoD6gPIY6aHR0cDovL2NybDMuZGlnaWNlcnQuY29tL0RpZ2lDZXJ0SGln
-aEFzc3VyYW5jZUVWUm9vdENBLmNybDBAoD6gPIY6aHR0cDovL2NybDQuZGlnaWNl
-cnQuY29tL0RpZ2lDZXJ0SGlnaEFzc3VyYW5jZUVWUm9vdENBLmNybDAfBgNVHSME
-GDAWgBSxPsNpA/i/RwHUmCYaCALvY2QrwzAdBgNVHQ4EFgQUUOpzidsp+xCPnuUB
-INTeeZlIg/cwDQYJKoZIhvcNAQEFBQADggEBAB7ipUiebNtTOA/vphoqrOIDQ+2a
-vD6OdRvw/S4iWawTwGHi5/rpmc2HCXVUKL9GYNy+USyS8xuRfDEIcOI3ucFbqL2j
-CwD7GhX9A61YasXHJJlIR0YxHpLvtF9ONMeQvzHB+LGEhtCcAarfilYGzjrpDq6X
-dF3XcZpCdF/ejUN83ulV7WkAywXgemFhM9EZTfkI7qA5xSU1tyvED7Ld8aW3DiTE
-JiiNeXf1L/BXunwH1OH8zVowV36GEEfdMR/X/KLCvzB8XSSq6PmuX2p0ws5rs0bY
-Ib4p1I5eFdZCSucyb6Sxa1GDWL4/bcf72gMhy2oWGU4K8K2Eyl2Us1p292E=
------END CERTIFICATE-----
-
-DigiCert High Assurance EV Root CA
------BEGIN CERTIFICATE-----
-MIIDxTCCAq2gAwIBAgIQAqxcJmoLQJuPC3nyrkYldzANBgkqhkiG9w0BAQUFADBs
-MQswCQYDVQQGEwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYDVQQLExB3
-d3cuZGlnaWNlcnQuY29tMSswKQYDVQQDEyJEaWdpQ2VydCBIaWdoIEFzc3VyYW5j
-ZSBFViBSb290IENBMB4XDTA2MTExMDAwMDAwMFoXDTMxMTExMDAwMDAwMFowbDEL
-MAkGA1UEBhMCVVMxFTATBgNVBAoTDERpZ2lDZXJ0IEluYzEZMBcGA1UECxMQd3d3
-LmRpZ2ljZXJ0LmNvbTErMCkGA1UEAxMiRGlnaUNlcnQgSGlnaCBBc3N1cmFuY2Ug
-RVYgUm9vdCBDQTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMbM5XPm
-+9S75S0tMqbf5YE/yc0lSbZxKsPVlDRnogocsF9ppkCxxLeyj9CYpKlBWTrT3JTW
-PNt0OKRKzE0lgvdKpVMSOO7zSW1xkX5jtqumX8OkhPhPYlG++MXs2ziS4wblCJEM
-xChBVfvLWokVfnHoNb9Ncgk9vjo4UFt3MRuNs8ckRZqnrG0AFFoEt7oT61EKmEFB
-Ik5lYYeBQVCmeVyJ3hlKV9Uu5l0cUyx+mM0aBhakaHPQNAQTXKFx01p8VdteZOE3
-hzBWBOURtCmAEvF5OYiiAhF8J2a3iLd48soKqDirCmTCv2ZdlYTBoSUeh10aUAsg
-EsxBu24LUTi4S8sCAwEAAaNjMGEwDgYDVR0PAQH/BAQDAgGGMA8GA1UdEwEB/wQF
-MAMBAf8wHQYDVR0OBBYEFLE+w2kD+L9HAdSYJhoIAu9jZCvDMB8GA1UdIwQYMBaA
-FLE+w2kD+L9HAdSYJhoIAu9jZCvDMA0GCSqGSIb3DQEBBQUAA4IBAQAcGgaX3Nec
-nzyIZgYIVyHbIUf4KmeqvxgydkAQV8GK83rZEWWONfqe/EW1ntlMMUu4kehDLI6z
-eM7b41N5cdblIZQB2lWHmiRk9opmzN6cN82oNLFpmyPInngiK3BD41VHMWEZ71jF
-hS9OMPagMRYjyOfiZRYzy78aG6A9+MpeizGLYAiJLQwGXFK3xPkKmNEVX58Svnw2
-Yzi9RKR/5CYrCsSXaQ3pjOLAEFe4yHYSkVXySGnYvCoCWw9E1CAx2/S6cCZdkGCe
-vEsXCS+0yx5DaMkHJ8HSXPfqIbloEpw8nL+e/IBcm2PN7EeqJSdnoDfzAIJ9VNep
-+OkuE6N36B9K
------END CERTIFICATE-----

data/lib/gist/json.rb

@@ -1,1304 +0,0 @@
-require 'strscan'
-
-module JSON
-  module Pure
-    # This class implements the JSON parser that is used to parse a JSON string
-    # into a Ruby data structure.
-    class Parser < StringScanner
-      STRING                = /" ((?:[^\x0-\x1f"\\] |
-                                   # escaped special characters:
-                                  \\["\\\/bfnrt] |
-                                  \\u[0-9a-fA-F]{4} |
-                                   # match all but escaped special characters:
-                                  \\[\x20-\x21\x23-\x2e\x30-\x5b\x5d-\x61\x63-\x65\x67-\x6d\x6f-\x71\x73\x75-\xff])*)
-                              "/nx
-      INTEGER               = /(-?0|-?[1-9]\d*)/
-      FLOAT                 = /(-?
-                                (?:0|[1-9]\d*)
-                                (?:
-                                  \.\d+(?i:e[+-]?\d+) |
-                                  \.\d+ |
-                                  (?i:e[+-]?\d+)
-                                )
-                                )/x
-      NAN                   = /NaN/
-      INFINITY              = /Infinity/
-      MINUS_INFINITY        = /-Infinity/
-      OBJECT_OPEN           = /\{/
-      OBJECT_CLOSE          = /\}/
-      ARRAY_OPEN            = /\[/
-      ARRAY_CLOSE           = /\]/
-      PAIR_DELIMITER        = /:/
-      COLLECTION_DELIMITER  = /,/
-      TRUE                  = /true/
-      FALSE                 = /false/
-      NULL                  = /null/
-      IGNORE                = %r(
-        (?:
-         //[^\n\r]*[\n\r]| # line comments
-         /\*               # c-style comments
-         (?:
-          [^*/]|        # normal chars
-          /[^*]|        # slashes that do not start a nested comment
-          \*[^/]|       # asterisks that do not end this comment
-          /(?=\*/)      # single slash before this comment's end
-         )*
-           \*/               # the End of this comment
-           |[ \t\r\n]+       # whitespaces: space, horicontal tab, lf, cr
-        )+
-      )mx
-
-      UNPARSED = Object.new
-
-      # Creates a new JSON::Pure::Parser instance for the string _source_.
-      #
-      # It will be configured by the _opts_ hash. _opts_ can have the following
-      # keys:
-      # * *max_nesting*: The maximum depth of nesting allowed in the parsed data
-      #   structures. Disable depth checking with :max_nesting => false|nil|0,
-      #   it defaults to 19.
-      # * *allow_nan*: If set to true, allow NaN, Infinity and -Infinity in
-      #   defiance of RFC 4627 to be parsed by the Parser. This option defaults
-      #   to false.
-      # * *symbolize_names*: If set to true, returns symbols for the names
-      #   (keys) in a JSON object. Otherwise strings are returned, which is also
-      #   the default.
-      # * *create_additions*: If set to false, the Parser doesn't create
-      #   additions even if a matchin class and create_id was found. This option
-      #   defaults to true.
-      # * *object_class*: Defaults to Hash
-      # * *array_class*: Defaults to Array
-      # * *quirks_mode*: Enables quirks_mode for parser, that is for example
-      #   parsing single JSON values instead of documents is possible.
-      def initialize(source, opts = {})
-        opts ||= {}
-        unless @quirks_mode = opts[:quirks_mode]
-          source = convert_encoding source
-        end
-        super source
-        if !opts.key?(:max_nesting) # defaults to 19
-          @max_nesting = 19
-        elsif opts[:max_nesting]
-          @max_nesting = opts[:max_nesting]
-        else
-          @max_nesting = 0
-        end
-        @allow_nan = !!opts[:allow_nan]
-        @symbolize_names = !!opts[:symbolize_names]
-        if opts.key?(:create_additions)
-          @create_additions = !!opts[:create_additions]
-        else
-          @create_additions = true
-        end
-        @create_id = @create_additions ? JSON.create_id : nil
-        @object_class = opts[:object_class] || Hash
-        @array_class  = opts[:array_class] || Array
-        @match_string = opts[:match_string]
-      end
-
-      alias source string
-
-      def quirks_mode?
-        !!@quirks_mode
-      end
-
-      def reset
-        super
-        @current_nesting = 0
-      end
-
-      # Parses the current JSON string _source_ and returns the complete data
-      # structure as a result.
-      def parse
-        reset
-        obj = nil
-        if @quirks_mode
-          while !eos? && skip(IGNORE)
-          end
-          if eos?
-            raise ParserError, "source did not contain any JSON!"
-          else
-            obj = parse_value
-            obj == UNPARSED and raise ParserError, "source did not contain any JSON!"
-          end
-        else
-          until eos?
-            case
-            when scan(OBJECT_OPEN)
-              obj and raise ParserError, "source '#{peek(20)}' not in JSON!"
-              @current_nesting = 1
-              obj = parse_object
-            when scan(ARRAY_OPEN)
-              obj and raise ParserError, "source '#{peek(20)}' not in JSON!"
-              @current_nesting = 1
-              obj = parse_array
-            when skip(IGNORE)
-              ;
-            else
-              raise ParserError, "source '#{peek(20)}' not in JSON!"
-            end
-          end
-          obj or raise ParserError, "source did not contain any JSON!"
-        end
-        obj
-      end
-
-      private
-
-      def convert_encoding(source)
-        if source.respond_to?(:to_str)
-          source = source.to_str
-        else
-          raise TypeError, "#{source.inspect} is not like a string"
-        end
-        if defined?(::Encoding)
-          if source.encoding == ::Encoding::ASCII_8BIT
-            b = source[0, 4].bytes.to_a
-            source =
-              case
-              when b.size >= 4 && b[0] == 0 && b[1] == 0 && b[2] == 0
-                source.dup.force_encoding(::Encoding::UTF_32BE).encode!(::Encoding::UTF_8)
-              when b.size >= 4 && b[0] == 0 && b[2] == 0
-                source.dup.force_encoding(::Encoding::UTF_16BE).encode!(::Encoding::UTF_8)
-              when b.size >= 4 && b[1] == 0 && b[2] == 0 && b[3] == 0
-                source.dup.force_encoding(::Encoding::UTF_32LE).encode!(::Encoding::UTF_8)
-              when b.size >= 4 && b[1] == 0 && b[3] == 0
-                source.dup.force_encoding(::Encoding::UTF_16LE).encode!(::Encoding::UTF_8)
-              else
-                source.dup
-              end
-          else
-            source = source.encode(::Encoding::UTF_8)
-          end
-          source.force_encoding(::Encoding::ASCII_8BIT)
-        else
-          b = source
-          source =
-            case
-            when b.size >= 4 && b[0] == 0 && b[1] == 0 && b[2] == 0
-              JSON.iconv('utf-8', 'utf-32be', b)
-            when b.size >= 4 && b[0] == 0 && b[2] == 0
-              JSON.iconv('utf-8', 'utf-16be', b)
-            when b.size >= 4 && b[1] == 0 && b[2] == 0 && b[3] == 0
-              JSON.iconv('utf-8', 'utf-32le', b)
-            when b.size >= 4 && b[1] == 0 && b[3] == 0
-              JSON.iconv('utf-8', 'utf-16le', b)
-            else
-              b
-            end
-        end
-        source
-      end
-
-      # Unescape characters in strings.
-      UNESCAPE_MAP = Hash.new { |h, k| h[k] = k.chr }
-      UNESCAPE_MAP.update({
-        ?"  => '"',
-        ?\\ => '\\',
-        ?/  => '/',
-        ?b  => "\b",
-        ?f  => "\f",
-        ?n  => "\n",
-        ?r  => "\r",
-        ?t  => "\t",
-        ?u  => nil,
-      })
-
-      EMPTY_8BIT_STRING = ''
-      if ::String.method_defined?(:encode)
-        EMPTY_8BIT_STRING.force_encoding Encoding::ASCII_8BIT
-      end
-
-      def parse_string
-        if scan(STRING)
-          return '' if self[1].empty?
-          string = self[1].gsub(%r((?:\\[\\bfnrt"/]|(?:\\u(?:[A-Fa-f\d]{4}))+|\\[\x20-\xff]))n) do |c|
-            if u = UNESCAPE_MAP[$&[1]]
-              u
-            else # \uXXXX
-              bytes = EMPTY_8BIT_STRING.dup
-              i = 0
-              while c[6 * i] == ?\\ && c[6 * i + 1] == ?u
-                bytes << c[6 * i + 2, 2].to_i(16) << c[6 * i + 4, 2].to_i(16)
-                i += 1
-              end
-              JSON.iconv('utf-8', 'utf-16be', bytes)
-            end
-          end
-          if string.respond_to?(:force_encoding)
-            string.force_encoding(::Encoding::UTF_8)
-          end
-          if @create_additions and @match_string
-            for (regexp, klass) in @match_string
-              klass.json_creatable? or next
-              string =~ regexp and return klass.json_create(string)
-            end
-          end
-          string
-        else
-          UNPARSED
-        end
-      rescue => e
-        raise ParserError, "Caught #{e.class} at '#{peek(20)}': #{e}"
-      end
-
-      def parse_value
-        case
-        when scan(FLOAT)
-          Float(self[1])
-        when scan(INTEGER)
-          Integer(self[1])
-        when scan(TRUE)
-          true
-        when scan(FALSE)
-          false
-        when scan(NULL)
-          nil
-        when (string = parse_string) != UNPARSED
-          string
-        when scan(ARRAY_OPEN)
-          @current_nesting += 1
-          ary = parse_array
-          @current_nesting -= 1
-          ary
-        when scan(OBJECT_OPEN)
-          @current_nesting += 1
-          obj = parse_object
-          @current_nesting -= 1
-          obj
-        when @allow_nan && scan(NAN)
-          NaN
-        when @allow_nan && scan(INFINITY)
-          Infinity
-        when @allow_nan && scan(MINUS_INFINITY)
-          MinusInfinity
-        else
-          UNPARSED
-        end
-      end
-
-      def parse_array
-        raise NestingError, "nesting of #@current_nesting is too deep" if
-          @max_nesting.nonzero? && @current_nesting > @max_nesting
-        result = @array_class.new
-        delim = false
-        until eos?
-          case
-          when (value = parse_value) != UNPARSED
-            delim = false
-            result << value
-            skip(IGNORE)
-            if scan(COLLECTION_DELIMITER)
-              delim = true
-            elsif match?(ARRAY_CLOSE)
-              ;
-            else
-              raise ParserError, "expected ',' or ']' in array at '#{peek(20)}'!"
-            end
-          when scan(ARRAY_CLOSE)
-            if delim
-              raise ParserError, "expected next element in array at '#{peek(20)}'!"
-            end
-            break
-          when skip(IGNORE)
-            ;
-          else
-            raise ParserError, "unexpected token in array at '#{peek(20)}'!"
-          end
-        end
-        result
-      end
-
-      def parse_object
-        raise NestingError, "nesting of #@current_nesting is too deep" if
-          @max_nesting.nonzero? && @current_nesting > @max_nesting
-        result = @object_class.new
-        delim = false
-        until eos?
-          case
-          when (string = parse_string) != UNPARSED
-            skip(IGNORE)
-            unless scan(PAIR_DELIMITER)
-              raise ParserError, "expected ':' in object at '#{peek(20)}'!"
-            end
-            skip(IGNORE)
-            unless (value = parse_value).equal? UNPARSED
-              result[@symbolize_names ? string.to_sym : string] = value
-              delim = false
-              skip(IGNORE)
-              if scan(COLLECTION_DELIMITER)
-                delim = true
-              elsif match?(OBJECT_CLOSE)
-                ;
-              else
-                raise ParserError, "expected ',' or '}' in object at '#{peek(20)}'!"
-              end
-            else
-              raise ParserError, "expected value in object at '#{peek(20)}'!"
-            end
-          when scan(OBJECT_CLOSE)
-            if delim
-              raise ParserError, "expected next name, value pair in object at '#{peek(20)}'!"
-            end
-            if @create_additions and klassname = result[@create_id]
-              klass = JSON.deep_const_get klassname
-              break unless klass and klass.json_creatable?
-              result = klass.json_create(result)
-            end
-            break
-          when skip(IGNORE)
-            ;
-          else
-            raise ParserError, "unexpected token in object at '#{peek(20)}'!"
-          end
-        end
-        result
-      end
-    end
-  end
-end
-
-module JSON
-  MAP = {
-    "\x0" => '\u0000',
-    "\x1" => '\u0001',
-    "\x2" => '\u0002',
-    "\x3" => '\u0003',
-    "\x4" => '\u0004',
-    "\x5" => '\u0005',
-    "\x6" => '\u0006',
-    "\x7" => '\u0007',
-    "\b"  =>  '\b',
-    "\t"  =>  '\t',
-    "\n"  =>  '\n',
-    "\xb" => '\u000b',
-    "\f"  =>  '\f',
-    "\r"  =>  '\r',
-    "\xe" => '\u000e',
-    "\xf" => '\u000f',
-    "\x10" => '\u0010',
-    "\x11" => '\u0011',
-    "\x12" => '\u0012',
-    "\x13" => '\u0013',
-    "\x14" => '\u0014',
-    "\x15" => '\u0015',
-    "\x16" => '\u0016',
-    "\x17" => '\u0017',
-    "\x18" => '\u0018',
-    "\x19" => '\u0019',
-    "\x1a" => '\u001a',
-    "\x1b" => '\u001b',
-    "\x1c" => '\u001c',
-    "\x1d" => '\u001d',
-    "\x1e" => '\u001e',
-    "\x1f" => '\u001f',
-    '"'   =>  '\"',
-    '\\'  =>  '\\\\',
-  } # :nodoc:
-
-  # Convert a UTF8 encoded Ruby string _string_ to a JSON string, encoded with
-  # UTF16 big endian characters as \u????, and return it.
-  if defined?(::Encoding)
-    def utf8_to_json(string) # :nodoc:
-      string = string.dup
-      string << '' # XXX workaround: avoid buffer sharing
-      string.force_encoding(::Encoding::ASCII_8BIT)
-      string.gsub!(/["\\\x0-\x1f]/) { MAP[$&] }
-      string.force_encoding(::Encoding::UTF_8)
-      string
-    end
-
-    def utf8_to_json_ascii(string) # :nodoc:
-      string = string.dup
-      string << '' # XXX workaround: avoid buffer sharing
-      string.force_encoding(::Encoding::ASCII_8BIT)
-      string.gsub!(/["\\\x0-\x1f]/) { MAP[$&] }
-      string.gsub!(/(
-                      (?:
-                        [\xc2-\xdf][\x80-\xbf]    |
-                        [\xe0-\xef][\x80-\xbf]{2} |
-                        [\xf0-\xf4][\x80-\xbf]{3}
-                      )+ |
-                      [\x80-\xc1\xf5-\xff]       # invalid
-                    )/nx) { |c|
-                      c.size == 1 and raise GeneratorError, "invalid utf8 byte: '#{c}'"
-                      s = JSON.iconv('utf-16be', 'utf-8', c).unpack('H*')[0]
-                      s.gsub!(/.{4}/n, '\\\\u\&')
-                    }
-      string.force_encoding(::Encoding::UTF_8)
-      string
-    rescue => e
-      raise GeneratorError, "Caught #{e.class}: #{e}"
-    end
-  else
-    def utf8_to_json(string) # :nodoc:
-      string.gsub(/["\\\x0-\x1f]/) { MAP[$&] }
-    end
-
-    def utf8_to_json_ascii(string) # :nodoc:
-      string = string.gsub(/["\\\x0-\x1f]/) { MAP[$&] }
-      string.gsub!(/(
-                      (?:
-                        [\xc2-\xdf][\x80-\xbf]    |
-                        [\xe0-\xef][\x80-\xbf]{2} |
-                        [\xf0-\xf4][\x80-\xbf]{3}
-                      )+ |
-                      [\x80-\xc1\xf5-\xff]       # invalid
-                    )/nx) { |c|
-        c.size == 1 and raise GeneratorError, "invalid utf8 byte: '#{c}'"
-        s = JSON.iconv('utf-16be', 'utf-8', c).unpack('H*')[0]
-        s.gsub!(/.{4}/n, '\\\\u\&')
-      }
-      string
-    rescue => e
-      raise GeneratorError, "Caught #{e.class}: #{e}"
-    end
-  end
-  module_function :utf8_to_json, :utf8_to_json_ascii
-
-  module Pure
-    module Generator
-      # This class is used to create State instances, that are use to hold data
-      # while generating a JSON text from a Ruby data structure.
-      class State
-        # Creates a State object from _opts_, which ought to be Hash to create
-        # a new State instance configured by _opts_, something else to create
-        # an unconfigured instance. If _opts_ is a State object, it is just
-        # returned.
-        def self.from_state(opts)
-          case
-          when self === opts
-            opts
-          when opts.respond_to?(:to_hash)
-            new(opts.to_hash)
-          when opts.respond_to?(:to_h)
-            new(opts.to_h)
-          else
-            SAFE_STATE_PROTOTYPE.dup
-          end
-        end
-
-        # Instantiates a new State object, configured by _opts_.
-        #
-        # _opts_ can have the following keys:
-        #
-        # * *indent*: a string used to indent levels (default: ''),
-        # * *space*: a string that is put after, a : or , delimiter (default: ''),
-        # * *space_before*: a string that is put before a : pair delimiter (default: ''),
-        # * *object_nl*: a string that is put at the end of a JSON object (default: ''),
-        # * *array_nl*: a string that is put at the end of a JSON array (default: ''),
-        # * *check_circular*: is deprecated now, use the :max_nesting option instead,
-        # * *max_nesting*: sets the maximum level of data structure nesting in
-        #   the generated JSON, max_nesting = 0 if no maximum should be checked.
-        # * *allow_nan*: true if NaN, Infinity, and -Infinity should be
-        #   generated, otherwise an exception is thrown, if these values are
-        #   encountered. This options defaults to false.
-        # * *quirks_mode*: Enables quirks_mode for parser, that is for example
-        #   generating single JSON values instead of documents is possible.
-        def initialize(opts = {})
-          @indent                = ''
-          @space                 = ''
-          @space_before          = ''
-          @object_nl             = ''
-          @array_nl              = ''
-          @allow_nan             = false
-          @ascii_only            = false
-          @quirks_mode           = false
-          @buffer_initial_length = 1024
-          configure opts
-        end
-
-        # This string is used to indent levels in the JSON text.
-        attr_accessor :indent
-
-        # This string is used to insert a space between the tokens in a JSON
-        # string.
-        attr_accessor :space
-
-        # This string is used to insert a space before the ':' in JSON objects.
-        attr_accessor :space_before
-
-        # This string is put at the end of a line that holds a JSON object (or
-        # Hash).
-        attr_accessor :object_nl
-
-        # This string is put at the end of a line that holds a JSON array.
-        attr_accessor :array_nl
-
-        # This integer returns the maximum level of data structure nesting in
-        # the generated JSON, max_nesting = 0 if no maximum is checked.
-        attr_accessor :max_nesting
-
-        # If this attribute is set to true, quirks mode is enabled, otherwise
-        # it's disabled.
-        attr_accessor :quirks_mode
-
-        # :stopdoc:
-        attr_reader :buffer_initial_length
-
-        def buffer_initial_length=(length)
-          if length > 0
-            @buffer_initial_length = length
-          end
-        end
-        # :startdoc:
-
-        # This integer returns the current depth data structure nesting in the
-        # generated JSON.
-        attr_accessor :depth
-
-        def check_max_nesting # :nodoc:
-          return if @max_nesting.zero?
-          current_nesting = depth + 1
-          current_nesting > @max_nesting and
-            raise NestingError, "nesting of #{current_nesting} is too deep"
-        end
-
-        # Returns true, if circular data structures are checked,
-        # otherwise returns false.
-        def check_circular?
-          !@max_nesting.zero?
-        end
-
-        # Returns true if NaN, Infinity, and -Infinity should be considered as
-        # valid JSON and output.
-        def allow_nan?
-          @allow_nan
-        end
-
-        # Returns true, if only ASCII characters should be generated. Otherwise
-        # returns false.
-        def ascii_only?
-          @ascii_only
-        end
-
-        # Returns true, if quirks mode is enabled. Otherwise returns false.
-        def quirks_mode?
-          @quirks_mode
-        end
-
-        # Configure this State instance with the Hash _opts_, and return
-        # itself.
-        def configure(opts)
-          @indent         = opts[:indent] if opts.key?(:indent)
-          @space          = opts[:space] if opts.key?(:space)
-          @space_before   = opts[:space_before] if opts.key?(:space_before)
-          @object_nl      = opts[:object_nl] if opts.key?(:object_nl)
-          @array_nl       = opts[:array_nl] if opts.key?(:array_nl)
-          @allow_nan      = !!opts[:allow_nan] if opts.key?(:allow_nan)
-          @ascii_only     = opts[:ascii_only] if opts.key?(:ascii_only)
-          @depth          = opts[:depth] || 0
-          @quirks_mode    = opts[:quirks_mode] if opts.key?(:quirks_mode)
-          if !opts.key?(:max_nesting) # defaults to 19
-            @max_nesting = 19
-          elsif opts[:max_nesting]
-            @max_nesting = opts[:max_nesting]
-          else
-            @max_nesting = 0
-          end
-          self
-        end
-        alias merge configure
-
-        # Returns the configuration instance variables as a hash, that can be
-        # passed to the configure method.
-        def to_h
-          result = {}
-          for iv in %w[indent space space_before object_nl array_nl allow_nan max_nesting ascii_only quirks_mode buffer_initial_length depth]
-            result[iv.intern] = instance_variable_get("@#{iv}")
-          end
-          result
-        end
-
-        # Generates a valid JSON document from object +obj+ and returns the
-        # result. If no valid JSON document can be created this method raises a
-        # GeneratorError exception.
-        def generate(obj)
-          result = obj.to_json(self)
-          unless @quirks_mode
-            unless result =~ /\A\s*\[/ && result =~ /\]\s*\Z/ ||
-              result =~ /\A\s*\{/ && result =~ /\}\s*\Z/
-            then
-              raise GeneratorError, "only generation of JSON objects or arrays allowed"
-            end
-          end
-          result
-        end
-
-        # Return the value returned by method +name+.
-        def [](name)
-          __send__ name
-        end
-      end
-
-      module GeneratorMethods
-        module Object
-          # Converts this object to a string (calling #to_s), converts
-          # it to a JSON string, and returns the result. This is a fallback, if no
-          # special method #to_json was defined for some object.
-          def to_json(*) to_s.to_json end
-        end
-
-        module Hash
-          # Returns a JSON string containing a JSON object, that is unparsed from
-          # this Hash instance.
-          # _state_ is a JSON::State object, that can also be used to configure the
-          # produced JSON string output further.
-          # _depth_ is used to find out nesting depth, to indent accordingly.
-          def to_json(state = nil, *)
-            state = State.from_state(state)
-            state.check_max_nesting
-            json_transform(state)
-          end
-
-          private
-
-          def json_shift(state)
-            state.object_nl.empty? or return ''
-            state.indent * state.depth
-          end
-
-          def json_transform(state)
-            delim = ','
-            delim << state.object_nl
-            result = '{'
-            result << state.object_nl
-            depth = state.depth += 1
-            first = true
-            indent = !state.object_nl.empty?
-            each { |key,value|
-              result << delim unless first
-              result << state.indent * depth if indent
-              result << key.to_s.to_json(state)
-              result << state.space_before
-              result << ':'
-              result << state.space
-              result << value.to_json(state)
-              first = false
-            }
-            depth = state.depth -= 1
-            result << state.object_nl
-            result << state.indent * depth if indent if indent
-            result << '}'
-            result
-          end
-        end
-
-        module Array
-          # Returns a JSON string containing a JSON array, that is unparsed from
-          # this Array instance.
-          # _state_ is a JSON::State object, that can also be used to configure the
-          # produced JSON string output further.
-          def to_json(state = nil, *)
-            state = State.from_state(state)
-            state.check_max_nesting
-            json_transform(state)
-          end
-
-          private
-
-          def json_transform(state)
-            delim = ','
-            delim << state.array_nl
-            result = '['
-            result << state.array_nl
-            depth = state.depth += 1
-            first = true
-            indent = !state.array_nl.empty?
-            each { |value|
-              result << delim unless first
-              result << state.indent * depth if indent
-              result << value.to_json(state)
-              first = false
-            }
-            depth = state.depth -= 1
-            result << state.array_nl
-            result << state.indent * depth if indent
-            result << ']'
-          end
-        end
-
-        module Integer
-          # Returns a JSON string representation for this Integer number.
-          def to_json(*) to_s end
-        end
-
-        module Float
-          # Returns a JSON string representation for this Float number.
-          def to_json(state = nil, *)
-            state = State.from_state(state)
-            case
-            when infinite?
-              if state.allow_nan?
-                to_s
-              else
-                raise GeneratorError, "#{self} not allowed in JSON"
-              end
-            when nan?
-              if state.allow_nan?
-                to_s
-              else
-                raise GeneratorError, "#{self} not allowed in JSON"
-              end
-            else
-              to_s
-            end
-          end
-        end
-
-        module String
-          if defined?(::Encoding)
-            # This string should be encoded with UTF-8 A call to this method
-            # returns a JSON string encoded with UTF16 big endian characters as
-            # \u????.
-            def to_json(state = nil, *args)
-              state = State.from_state(state)
-              if encoding == ::Encoding::UTF_8
-                string = self
-              else
-                string = encode(::Encoding::UTF_8)
-              end
-              if state.ascii_only?
-                '"' << JSON.utf8_to_json_ascii(string) << '"'
-              else
-                '"' << JSON.utf8_to_json(string) << '"'
-              end
-            end
-          else
-            # This string should be encoded with UTF-8 A call to this method
-            # returns a JSON string encoded with UTF16 big endian characters as
-            # \u????.
-            def to_json(state = nil, *args)
-              state = State.from_state(state)
-              if state.ascii_only?
-                '"' << JSON.utf8_to_json_ascii(self) << '"'
-              else
-                '"' << JSON.utf8_to_json(self) << '"'
-              end
-            end
-          end
-
-          # Module that holds the extinding methods if, the String module is
-          # included.
-          module Extend
-            # Raw Strings are JSON Objects (the raw bytes are stored in an
-            # array for the key "raw"). The Ruby String can be created by this
-            # module method.
-            def json_create(o)
-              o['raw'].pack('C*')
-            end
-          end
-
-          # Extends _modul_ with the String::Extend module.
-          def self.included(modul)
-            modul.extend Extend
-          end
-
-          # This method creates a raw object hash, that can be nested into
-          # other data structures and will be unparsed as a raw string. This
-          # method should be used, if you want to convert raw strings to JSON
-          # instead of UTF-8 strings, e. g. binary data.
-          def to_json_raw_object
-            {
-              JSON.create_id  => self.class.name,
-              'raw'           => self.unpack('C*'),
-            }
-          end
-
-          # This method creates a JSON text from the result of
-          # a call to to_json_raw_object of this String.
-          def to_json_raw(*args)
-            to_json_raw_object.to_json(*args)
-          end
-        end
-
-        module TrueClass
-          # Returns a JSON string for true: 'true'.
-          def to_json(*) 'true' end
-        end
-
-        module FalseClass
-          # Returns a JSON string for false: 'false'.
-          def to_json(*) 'false' end
-        end
-
-        module NilClass
-          # Returns a JSON string for nil: 'null'.
-          def to_json(*) 'null' end
-        end
-      end
-    end
-  end
-end
-
-module JSON
-  class << self
-    # If _object_ is string-like, parse the string and return the parsed result
-    # as a Ruby data structure. Otherwise generate a JSON text from the Ruby
-    # data structure object and return it.
-    #
-    # The _opts_ argument is passed through to generate/parse respectively. See
-    # generate and parse for their documentation.
-    def [](object, opts = {})
-      if object.respond_to? :to_str
-        JSON.parse(object.to_str, opts)
-      else
-        JSON.generate(object, opts)
-      end
-    end
-
-    # Returns the JSON parser class that is used by JSON. This is either
-    # JSON::Ext::Parser or JSON::Pure::Parser.
-    attr_reader :parser
-
-    # Set the JSON parser class _parser_ to be used by JSON.
-    def parser=(parser) # :nodoc:
-      @parser = parser
-      remove_const :Parser if JSON.const_defined_in?(self, :Parser)
-      const_set :Parser, parser
-    end
-
-    # Return the constant located at _path_. The format of _path_ has to be
-    # either ::A::B::C or A::B::C. In any case, A has to be located at the top
-    # level (absolute namespace path?). If there doesn't exist a constant at
-    # the given path, an ArgumentError is raised.
-    def deep_const_get(path) # :nodoc:
-      path.to_s.split(/::/).inject(Object) do |p, c|
-        case
-        when c.empty?                     then p
-        when JSON.const_defined_in?(p, c) then p.const_get(c)
-        else
-          begin
-            p.const_missing(c)
-          rescue NameError => e
-            raise ArgumentError, "can't get const #{path}: #{e}"
-          end
-        end
-      end
-    end
-
-    # Set the module _generator_ to be used by JSON.
-    def generator=(generator) # :nodoc:
-      old, $VERBOSE = $VERBOSE, nil
-      @generator = generator
-      generator_methods = generator::GeneratorMethods
-      for const in generator_methods.constants
-        klass = deep_const_get(const)
-        modul = generator_methods.const_get(const)
-        klass.class_eval do
-          instance_methods(false).each do |m|
-            m.to_s == 'to_json' and remove_method m
-          end
-          include modul
-        end
-      end
-      self.state = generator::State
-      const_set :State, self.state
-      const_set :SAFE_STATE_PROTOTYPE, State.new
-      const_set :FAST_STATE_PROTOTYPE, State.new(
-        :indent         => '',
-        :space          => '',
-        :object_nl      => "",
-        :array_nl       => "",
-        :max_nesting    => false
-      )
-      const_set :PRETTY_STATE_PROTOTYPE, State.new(
-        :indent         => '  ',
-        :space          => ' ',
-        :object_nl      => "\n",
-        :array_nl       => "\n"
-      )
-    ensure
-      $VERBOSE = old
-    end
-
-    # Returns the JSON generator module that is used by JSON. This is
-    # either JSON::Ext::Generator or JSON::Pure::Generator.
-    attr_reader :generator
-
-    # Returns the JSON generator state class that is used by JSON. This is
-    # either JSON::Ext::Generator::State or JSON::Pure::Generator::State.
-    attr_accessor :state
-
-    # This is create identifier, which is used to decide if the _json_create_
-    # hook of a class should be called. It defaults to 'json_class'.
-    attr_accessor :create_id
-  end
-  self.create_id = 'json_class'
-
-  NaN           = 0.0/0
-
-  Infinity      = 1.0/0
-
-  MinusInfinity = -Infinity
-
-  # The base exception for JSON errors.
-  class JSONError < StandardError; end
-
-  # This exception is raised if a parser error occurs.
-  class ParserError < JSONError; end
-
-  # This exception is raised if the nesting of parsed data structures is too
-  # deep.
-  class NestingError < ParserError; end
-
-  # :stopdoc:
-  class CircularDatastructure < NestingError; end
-  # :startdoc:
-
-  # This exception is raised if a generator or unparser error occurs.
-  class GeneratorError < JSONError; end
-  # For backwards compatibility
-  UnparserError = GeneratorError
-
-  # This exception is raised if the required unicode support is missing on the
-  # system. Usually this means that the iconv library is not installed.
-  class MissingUnicodeSupport < JSONError; end
-
-  module_function
-
-  # Parse the JSON document _source_ into a Ruby data structure and return it.
-  #
-  # _opts_ can have the following
-  # keys:
-  # * *max_nesting*: The maximum depth of nesting allowed in the parsed data
-  #   structures. Disable depth checking with :max_nesting => false. It defaults
-  #   to 19.
-  # * *allow_nan*: If set to true, allow NaN, Infinity and -Infinity in
-  #   defiance of RFC 4627 to be parsed by the Parser. This option defaults
-  #   to false.
-  # * *symbolize_names*: If set to true, returns symbols for the names
-  #   (keys) in a JSON object. Otherwise strings are returned. Strings are
-  #   the default.
-  # * *create_additions*: If set to false, the Parser doesn't create
-  #   additions even if a matching class and create_id was found. This option
-  #   defaults to true.
-  # * *object_class*: Defaults to Hash
-  # * *array_class*: Defaults to Array
-  def parse(source, opts = {})
-    Parser.new(source, opts).parse
-  end
-
-  # Parse the JSON document _source_ into a Ruby data structure and return it.
-  # The bang version of the parse method defaults to the more dangerous values
-  # for the _opts_ hash, so be sure only to parse trusted _source_ documents.
-  #
-  # _opts_ can have the following keys:
-  # * *max_nesting*: The maximum depth of nesting allowed in the parsed data
-  #   structures. Enable depth checking with :max_nesting => anInteger. The parse!
-  #   methods defaults to not doing max depth checking: This can be dangerous
-  #   if someone wants to fill up your stack.
-  # * *allow_nan*: If set to true, allow NaN, Infinity, and -Infinity in
-  #   defiance of RFC 4627 to be parsed by the Parser. This option defaults
-  #   to true.
-  # * *create_additions*: If set to false, the Parser doesn't create
-  #   additions even if a matching class and create_id was found. This option
-  #   defaults to true.
-  def parse!(source, opts = {})
-    opts = {
-      :max_nesting  => false,
-      :allow_nan    => true
-    }.update(opts)
-    Parser.new(source, opts).parse
-  end
-
-  # Generate a JSON document from the Ruby data structure _obj_ and return
-  # it. _state_ is * a JSON::State object,
-  # * or a Hash like object (responding to to_hash),
-  # * an object convertible into a hash by a to_h method,
-  # that is used as or to configure a State object.
-  #
-  # It defaults to a state object, that creates the shortest possible JSON text
-  # in one line, checks for circular data structures and doesn't allow NaN,
-  # Infinity, and -Infinity.
-  #
-  # A _state_ hash can have the following keys:
-  # * *indent*: a string used to indent levels (default: ''),
-  # * *space*: a string that is put after, a : or , delimiter (default: ''),
-  # * *space_before*: a string that is put before a : pair delimiter (default: ''),
-  # * *object_nl*: a string that is put at the end of a JSON object (default: ''),
-  # * *array_nl*: a string that is put at the end of a JSON array (default: ''),
-  # * *allow_nan*: true if NaN, Infinity, and -Infinity should be
-  #   generated, otherwise an exception is thrown if these values are
-  #   encountered. This options defaults to false.
-  # * *max_nesting*: The maximum depth of nesting allowed in the data
-  #   structures from which JSON is to be generated. Disable depth checking
-  #   with :max_nesting => false, it defaults to 19.
-  #
-  # See also the fast_generate for the fastest creation method with the least
-  # amount of sanity checks, and the pretty_generate method for some
-  # defaults for pretty output.
-  def generate(obj, opts = nil)
-    if State === opts
-      state, opts = opts, nil
-    else
-      state = SAFE_STATE_PROTOTYPE.dup
-    end
-    if opts
-      if opts.respond_to? :to_hash
-        opts = opts.to_hash
-      elsif opts.respond_to? :to_h
-        opts = opts.to_h
-      else
-        raise TypeError, "can't convert #{opts.class} into Hash"
-      end
-      state = state.configure(opts)
-    end
-    state.generate(obj)
-  end
-
-  # :stopdoc:
-  # I want to deprecate these later, so I'll first be silent about them, and
-  # later delete them.
-  alias unparse generate
-  module_function :unparse
-  # :startdoc:
-
-  # Generate a JSON document from the Ruby data structure _obj_ and return it.
-  # This method disables the checks for circles in Ruby objects.
-  #
-  # *WARNING*: Be careful not to pass any Ruby data structures with circles as
-  # _obj_ argument because this will cause JSON to go into an infinite loop.
-  def fast_generate(obj, opts = nil)
-    if State === opts
-      state, opts = opts, nil
-    else
-      state = FAST_STATE_PROTOTYPE.dup
-    end
-    if opts
-      if opts.respond_to? :to_hash
-        opts = opts.to_hash
-      elsif opts.respond_to? :to_h
-        opts = opts.to_h
-      else
-        raise TypeError, "can't convert #{opts.class} into Hash"
-      end
-      state.configure(opts)
-    end
-    state.generate(obj)
-  end
-
-  # :stopdoc:
-  # I want to deprecate these later, so I'll first be silent about them, and later delete them.
-  alias fast_unparse fast_generate
-  module_function :fast_unparse
-  # :startdoc:
-
-  # Generate a JSON document from the Ruby data structure _obj_ and return it.
-  # The returned document is a prettier form of the document returned by
-  # #unparse.
-  #
-  # The _opts_ argument can be used to configure the generator. See the
-  # generate method for a more detailed explanation.
-  def pretty_generate(obj, opts = nil)
-    if State === opts
-      state, opts = opts, nil
-    else
-      state = PRETTY_STATE_PROTOTYPE.dup
-    end
-    if opts
-      if opts.respond_to? :to_hash
-        opts = opts.to_hash
-      elsif opts.respond_to? :to_h
-        opts = opts.to_h
-      else
-        raise TypeError, "can't convert #{opts.class} into Hash"
-      end
-      state.configure(opts)
-    end
-    state.generate(obj)
-  end
-
-  # :stopdoc:
-  # I want to deprecate these later, so I'll first be silent about them, and later delete them.
-  alias pretty_unparse pretty_generate
-  module_function :pretty_unparse
-  # :startdoc:
-
-  class << self
-    # The global default options for the JSON.load method:
-    #  :max_nesting: false
-    #  :allow_nan:   true
-    #  :quirks_mode: true
-    attr_accessor :load_default_options
-  end
-  self.load_default_options = {
-    :max_nesting => false,
-    :allow_nan   => true,
-    :quirks_mode => true,
-  }
-
-  # Load a ruby data structure from a JSON _source_ and return it. A source can
-  # either be a string-like object, an IO-like object, or an object responding
-  # to the read method. If _proc_ was given, it will be called with any nested
-  # Ruby object as an argument recursively in depth first order. The default
-  # options for the parser can be changed via the load_default_options method.
-  #
-  # This method is part of the implementation of the load/dump interface of
-  # Marshal and YAML.
-  def load(source, proc = nil)
-    opts = load_default_options
-    if source.respond_to? :to_str
-      source = source.to_str
-    elsif source.respond_to? :to_io
-      source = source.to_io.read
-    elsif source.respond_to?(:read)
-      source = source.read
-    end
-    if opts[:quirks_mode] && (source.nil? || source.empty?)
-      source = 'null'
-    end
-    result = parse(source, opts)
-    recurse_proc(result, &proc) if proc
-    result
-  end
-
-  # Recursively calls passed _Proc_ if the parsed data structure is an _Array_ or _Hash_
-  def recurse_proc(result, &proc)
-    case result
-    when Array
-      result.each { |x| recurse_proc x, &proc }
-      proc.call result
-    when Hash
-      result.each { |x, y| recurse_proc x, &proc; recurse_proc y, &proc }
-      proc.call result
-    else
-      proc.call result
-    end
-  end
-
-  alias restore load
-  module_function :restore
-
-  class << self
-    # The global default options for the JSON.dump method:
-    #  :max_nesting: false
-    #  :allow_nan:   true
-    #  :quirks_mode: true
-    attr_accessor :dump_default_options
-  end
-  self.dump_default_options = {
-    :max_nesting => false,
-    :allow_nan   => true,
-    :quirks_mode => true,
-  }
-
-  # Dumps _obj_ as a JSON string, i.e. calls generate on the object and returns
-  # the result.
-  #
-  # If anIO (an IO-like object or an object that responds to the write method)
-  # was given, the resulting JSON is written to it.
-  #
-  # If the number of nested arrays or objects exceeds _limit_, an ArgumentError
-  # exception is raised. This argument is similar (but not exactly the
-  # same!) to the _limit_ argument in Marshal.dump.
-  #
-  # The default options for the generator can be changed via the
-  # dump_default_options method.
-  #
-  # This method is part of the implementation of the load/dump interface of
-  # Marshal and YAML.
-  def dump(obj, anIO = nil, limit = nil)
-    if anIO and limit.nil?
-      anIO = anIO.to_io if anIO.respond_to?(:to_io)
-      unless anIO.respond_to?(:write)
-        limit = anIO
-        anIO = nil
-      end
-    end
-    opts = JSON.dump_default_options
-    limit and opts.update(:max_nesting => limit)
-    result = generate(obj, opts)
-    if anIO
-      anIO.write result
-      anIO
-    else
-      result
-    end
-  rescue JSON::NestingError
-    raise ArgumentError, "exceed depth limit"
-  end
-
-  # Swap consecutive bytes of _string_ in place.
-  def self.swap!(string) # :nodoc:
-    0.upto(string.size / 2) do |i|
-      break unless string[2 * i + 1]
-      string[2 * i], string[2 * i + 1] = string[2 * i + 1], string[2 * i]
-    end
-    string
-  end
-
-  # Shortuct for iconv.
-  if ::String.method_defined?(:encode)
-    # Encodes string using Ruby's _String.encode_
-    def self.iconv(to, from, string)
-      string.encode(to, from)
-    end
-  else
-    require 'iconv'
-    # Encodes string using _iconv_ library
-    def self.iconv(to, from, string)
-      Iconv.conv(to, from, string)
-    end
-  end
-
-  if ::Object.method(:const_defined?).arity == 1
-    def self.const_defined_in?(modul, constant)
-      modul.const_defined?(constant)
-    end
-  else
-    def self.const_defined_in?(modul, constant)
-      modul.const_defined?(constant, false)
-    end
-  end
-end
-
-module ::Kernel
-  private
-
-  # Outputs _objs_ to STDOUT as JSON strings in the shortest form, that is in
-  # one line.
-  def j(*objs)
-    objs.each do |obj|
-      puts JSON::generate(obj, :allow_nan => true, :max_nesting => false)
-    end
-    nil
-  end
-
-  # Ouputs _objs_ to STDOUT as JSON strings in a pretty format, with
-  # indentation and over many lines.
-  def jj(*objs)
-    objs.each do |obj|
-      puts JSON::pretty_generate(obj, :allow_nan => true, :max_nesting => false)
-    end
-    nil
-  end
-
-  # If _object_ is string-like, parse the string and return the parsed result as
-  # a Ruby data structure. Otherwise, generate a JSON text from the Ruby data
-  # structure object and return it.
-  #
-  # The _opts_ argument is passed through to generate/parse respectively. See
-  # generate and parse for their documentation.
-  def JSON(object, *args)
-    if object.respond_to? :to_str
-      JSON.parse(object.to_str, args.first)
-    else
-      JSON.generate(object, args.first)
-    end
-  end
-end
-
-# Extends any Class to include _json_creatable?_ method.
-class ::Class
-  # Returns true if this class can be used to create an instance
-  # from a serialised JSON string. The class has to implement a class
-  # method _json_create_ that expects a hash as first parameter. The hash
-  # should include the required data.
-  def json_creatable?
-    respond_to?(:json_create)
-  end
-end
-
-JSON.generator = JSON::Pure::Generator
-JSON.parser    = JSON::Pure::Parser