gcloud 0.0.7 → 0.1.0

data/packages/gsutil/gslib/commands/update.py

@@ -1,305 +0,0 @@
-# Copyright 2011 Google Inc. All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-import os
-import platform
-import shutil
-import signal
-import sys
-import tarfile
-import tempfile
-
-from boto import config
-from gslib.command import Command
-from gslib.command import COMMAND_NAME
-from gslib.command import COMMAND_NAME_ALIASES
-from gslib.command import CONFIG_REQUIRED
-from gslib.command import FILE_URIS_OK
-from gslib.command import MAX_ARGS
-from gslib.command import MIN_ARGS
-from gslib.command import PROVIDER_URIS_OK
-from gslib.command import SUPPORTED_SUB_ARGS
-from gslib.command import URIS_START_ARG
-from gslib.exception import CommandException
-from gslib.help_provider import HELP_NAME
-from gslib.help_provider import HELP_NAME_ALIASES
-from gslib.help_provider import HELP_ONE_LINE_SUMMARY
-from gslib.help_provider import HELP_TEXT
-from gslib.help_provider import HelpType
-from gslib.help_provider import HELP_TYPE
-
-_detailed_help_text = ("""
-<B>SYNOPSIS</B>
-gsutil update [-f] [uri]
-
-
-<B>DESCRIPTION</B>
-  The gsutil update command downloads the latest gsutil release, checks its
-  version, and offers to let you update to it if it differs from the version
-  you're currently running.
-
-  Once you say "Y" to the prompt of whether to install the update, the gsutil
-  update command locates where the running copy of gsutil is installed,
-  unpacks the new version into an adjacent directory, moves the previous version
-  aside, moves the new version to where the previous version was installed,
-  and removes the moved-aside old version. Because of this, users are cautioned
-  not to store data in the gsutil directory, since that data will be lost
-  when you update gsutil. (Some users change directories into the gsutil
-  directory to run the command. We advise against doing that, for this reason.)
-
-  By default gsutil update will retrieve the new code from
-  gs://pub/gsutil.tar.gz, but you can optionally specify a URI to use
-  instead. This is primarily used for distributing pre-release versions of
-  the code to a small group of early test users.
-
-
-<B>OPTIONS</B>
-  -f          Forces the update command to offer to let you update, even if you
-              have the most current copy already. This can be useful if you have
-              a corrupted local copy.
-""")
-
-
-class UpdateCommand(Command):
-  """Implementation of gsutil update command."""
-
-  # Command specification (processed by parent class).
-  command_spec = {
-    # Name of command.
-    COMMAND_NAME : 'update',
-    # List of command name aliases.
-    COMMAND_NAME_ALIASES : ['refresh'],
-    # Min number of args required by this command.
-    MIN_ARGS : 0,
-    # Max number of args required by this command, or NO_MAX.
-    MAX_ARGS : 1,
-    # Getopt-style string specifying acceptable sub args.
-    SUPPORTED_SUB_ARGS : 'f',
-    # True if file URIs acceptable for this command.
-    FILE_URIS_OK : False,
-    # True if provider-only URIs acceptable for this command.
-    PROVIDER_URIS_OK : False,
-    # Index in args of first URI arg.
-    URIS_START_ARG : 0,
-    # True if must configure gsutil before running command.
-    CONFIG_REQUIRED : True,
-  }
-  help_spec = {
-    # Name of command or auxiliary help info for which this help applies.
-    HELP_NAME : 'update',
-    # List of help name aliases.
-    HELP_NAME_ALIASES : ['refresh'],
-    # Type of help:
-    HELP_TYPE : HelpType.COMMAND_HELP,
-    # One line summary of this help.
-    HELP_ONE_LINE_SUMMARY : 'Update to the latest gsutil release',
-    # The full help text.
-    HELP_TEXT : _detailed_help_text,
-  }
-
-  def _ExplainIfSudoNeeded(self, tf, dirs_to_remove):
-    """Explains what to do if sudo needed to update gsutil software.
-
-    Happens if gsutil was previously installed by a different user (typically if
-    someone originally installed in a shared file system location, using sudo).
-
-    Args:
-      tf: Opened TarFile.
-      dirs_to_remove: List of directories to remove.
-
-    Raises:
-      CommandException: if errors encountered.
-    """
-    system = platform.system()
-    # If running under Windows we don't need (or have) sudo.
-    if system.lower().startswith('windows'):
-      return
-
-    user_id = os.getuid()
-    if (os.stat(self.gsutil_bin_dir).st_uid == user_id
-        and os.stat(self.boto_lib_dir).st_uid == user_id):
-      return
-
-    # Won't fail - this command runs after main startup code that insists on
-    # having a config file.
-    config_files = ' '.join(self.config_file_list)
-    self._CleanUpUpdateCommand(tf, dirs_to_remove)
-    raise CommandException(
-        ('Since it was installed by a different user previously, you will need '
-         'to update using the following commands.\nYou will be prompted for '
-         'your password, and the install will run as "root". If you\'re unsure '
-         'what this means please ask your system administrator for help:'
-         '\n\tchmod 644 %s\n\tsudo env BOTO_CONFIG=%s gsutil update'
-         '\n\tchmod 600 %s') % (config_files, config_files, config_files),
-        informational=True)
-
-  # This list is checked during gsutil update by doing a lowercased
-  # slash-left-stripped check. For example "/Dev" would match the "dev" entry.
-  unsafe_update_dirs = [
-      'applications', 'auto', 'bin', 'boot', 'desktop', 'dev',
-      'documents and settings', 'etc', 'export', 'home', 'kernel', 'lib',
-      'lib32', 'library', 'lost+found', 'mach_kernel', 'media', 'mnt', 'net',
-      'null', 'network', 'opt', 'private', 'proc', 'program files', 'python',
-      'root', 'sbin', 'scripts', 'srv', 'sys', 'system', 'tmp', 'users', 'usr',
-      'var', 'volumes', 'win', 'win32', 'windows', 'winnt',
-  ]
-
-  def _EnsureDirsSafeForUpdate(self, dirs):
-    """Throws Exception if any of dirs is known to be unsafe for gsutil update.
-
-    This provides a fail-safe check to ensure we don't try to overwrite
-    or delete any important directories. (That shouldn't happen given the
-    way we construct tmp dirs, etc., but since the gsutil update cleanup
-    uses shutil.rmtree() it's prudent to add extra checks.)
-
-    Args:
-      dirs: List of directories to check.
-
-    Raises:
-      CommandException: If unsafe directory encountered.
-    """
-    for d in dirs:
-      if not d:
-        d = 'null'
-      if d.lstrip(os.sep).lower() in self.unsafe_update_dirs:
-        raise CommandException('EnsureDirsSafeForUpdate: encountered unsafe '
-                               'directory (%s); aborting update' % d)
-
-  def _CleanUpUpdateCommand(self, tf, dirs_to_remove):
-    """Cleans up temp files etc. from running update command.
-
-    Args:
-      tf: Opened TarFile.
-      dirs_to_remove: List of directories to remove.
-
-    """
-    tf.close()
-    self._EnsureDirsSafeForUpdate(dirs_to_remove)
-    for directory in dirs_to_remove:
-      try:
-        shutil.rmtree(directory)
-      except OSError as e:
-        # Ignore errors while attempting to remove old dirs under Windows. They
-        # happen because of Windows exclusive file locking, and the update
-        # actually succeeds but just leaves the old versions around in the
-        # user's temp dir.
-        if not platform.system().lower().startswith('windows'):
-          raise
-
-  # Command entry point.
-  def RunCommand(self):
-    for cfg_var in ('is_secure', 'https_validate_certificates'):
-      if (config.has_option('Boto', cfg_var)
-          and not config.getboolean('Boto', cfg_var)):
-        raise CommandException('Your boto configuration has %s = False. '
-                               'The update command\ncannot be run this way, for '
-                               'security reasons.' % cfg_var)
-    dirs_to_remove = []
-    # Retrieve gsutil tarball and check if it's newer than installed code.
-    # TODO: Store this version info as metadata on the tarball object and
-    # change this command's implementation to check that metadata instead of
-    # downloading the tarball to check the version info.
-    tmp_dir = tempfile.mkdtemp()
-    dirs_to_remove.append(tmp_dir)
-    os.chdir(tmp_dir)
-    print 'Checking for software update...'
-    if len(self.args):
-      update_from_uri_str = self.args[0]
-      if not update_from_uri_str.endswith('.tar.gz'):
-        raise CommandException(
-          'The update command only works with tar.gz files.')
-    else:
-      update_from_uri_str = 'gs://pub/gsutil.tar.gz'
-    self.command_runner.RunNamedCommand('cp', [update_from_uri_str,
-                                        'file://gsutil.tar.gz'],
-                                        self.headers, self.debug)
-    # Note: tf is closed in _CleanUpUpdateCommand.
-    tf = tarfile.open('gsutil.tar.gz')
-    tf.errorlevel = 1  # So fatal tarball unpack errors raise exceptions.
-    tf.extract('./gsutil/VERSION')
-
-    ver_file = open('gsutil/VERSION', 'r')
-    try:
-      latest_version_string = ver_file.read().rstrip('\n')
-    finally:
-      ver_file.close()
-
-    force_update = False
-    if self.sub_opts:
-      for o, unused_a in self.sub_opts:
-        if o == '-f':
-          force_update = True
-    if not force_update and self.gsutil_ver == latest_version_string:
-      self._CleanUpUpdateCommand(tf, dirs_to_remove)
-      if len(self.args):
-        raise CommandException('You already have %s installed.' %
-                               update_from_uri_str, informational=True)
-      else:
-        raise CommandException('You already have the latest gsutil release '
-                               'installed.', informational=True)
-
-    print(('This command will update to the "%s" version of\ngsutil at %s') %
-          (latest_version_string, self.gsutil_bin_dir))
-    self._ExplainIfSudoNeeded(tf, dirs_to_remove)
-
-    answer = raw_input('Proceed? [y/N] ')
-    if not answer or answer.lower()[0] != 'y':
-      self._CleanUpUpdateCommand(tf, dirs_to_remove)
-      raise CommandException('Not running update.', informational=True)
-
-    # Ignore keyboard interrupts during the update to reduce the chance someone
-    # hitting ^C leaves gsutil in a broken state.
-    signal.signal(signal.SIGINT, signal.SIG_IGN)
-
-    # self.gsutil_bin_dir lists the path where the code should end up (like
-    # /usr/local/gsutil), which is one level down from the relative path in the
-    # tarball (since the latter creates files in ./gsutil). So, we need to
-    # extract at the parent directory level.
-    gsutil_bin_parent_dir = os.path.dirname(self.gsutil_bin_dir)
-
-    # Extract tarball to a temporary directory in a sibling to gsutil_bin_dir.
-    old_dir = tempfile.mkdtemp(dir=gsutil_bin_parent_dir)
-    new_dir = tempfile.mkdtemp(dir=gsutil_bin_parent_dir)
-    dirs_to_remove.append(old_dir)
-    dirs_to_remove.append(new_dir)
-    self._EnsureDirsSafeForUpdate(dirs_to_remove)
-    try:
-      tf.extractall(path=new_dir)
-    except Exception, e:
-      self._CleanUpUpdateCommand(tf, dirs_to_remove)
-      raise CommandException('Update failed: %s.' % e)
-
-    # For enterprise mode (shared/central) installation, users with
-    # different user/group than the installation user/group must be
-    # able to run gsutil so we need to do some permissions adjustments
-    # here. Since enterprise mode is not not supported for Windows
-    # users, we can skip this step when running on Windows, which
-    # avoids the problem that Windows has no find or xargs command.
-    system = platform.system()
-    if not system.lower().startswith('windows'):
-      # Make all files and dirs in updated area readable by other
-      # and make all directories executable by other. These steps
-      os.system('chmod -R o+r ' + new_dir)
-      os.system('find ' + new_dir + ' -type d | xargs chmod o+x')
-
-      # Make main gsutil script readable and executable by other.
-      os.system('chmod o+rx ' + os.path.join(new_dir, 'gsutil'))
-
-    # Move old installation aside and new into place.
-    os.rename(self.gsutil_bin_dir, old_dir + os.sep + 'old')
-    os.rename(new_dir + os.sep + 'gsutil', self.gsutil_bin_dir)
-    self._CleanUpUpdateCommand(tf, dirs_to_remove)
-    signal.signal(signal.SIGINT, signal.SIG_DFL)
-    print 'Update complete.'
-    return 0

data/packages/gsutil/gslib/commands/version.py

@@ -1,150 +0,0 @@
-# Copyright 2011 Google Inc. All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-import boto
-import os
-import re
-import sys
-
-from boto.pyami.config import BotoConfigLocations
-from gslib.command import Command
-from gslib.command import COMMAND_NAME
-from gslib.command import COMMAND_NAME_ALIASES
-from gslib.command import CONFIG_REQUIRED
-from gslib.command import FILE_URIS_OK
-from gslib.command import MAX_ARGS
-from gslib.command import MIN_ARGS
-from gslib.command import PROVIDER_URIS_OK
-from gslib.command import SUPPORTED_SUB_ARGS
-from gslib.command import URIS_START_ARG
-from gslib.help_provider import HELP_NAME
-from gslib.help_provider import HELP_NAME_ALIASES
-from gslib.help_provider import HELP_ONE_LINE_SUMMARY
-from gslib.help_provider import HELP_TEXT
-from gslib.help_provider import HelpType
-from gslib.help_provider import HELP_TYPE
-from hashlib import md5
-
-_detailed_help_text = ("""
-<B>SYNOPSIS</B>
-  gsutil version
-
-
-<B>DESCRIPTION</B>
-  Prints information about the version of gsutil, boto, and Python being
-  run on your system.
-""")
-
-
-class VersionCommand(Command):
-  """Implementation of gsutil version command."""
-
-  # Command specification (processed by parent class).
-  command_spec = {
-    # Name of command.
-    COMMAND_NAME : 'version',
-    # List of command name aliases.
-    COMMAND_NAME_ALIASES : ['ver'],
-    # Min number of args required by this command.
-    MIN_ARGS : 0,
-    # Max number of args required by this command, or NO_MAX.
-    MAX_ARGS : 0,
-    # Getopt-style string specifying acceptable sub args.
-    SUPPORTED_SUB_ARGS : '',
-    # True if file URIs acceptable for this command.
-    FILE_URIS_OK : False,
-    # True if provider-only URIs acceptable for this command.
-    PROVIDER_URIS_OK : False,
-    # Index in args of first URI arg.
-    URIS_START_ARG : 0,
-    # True if must configure gsutil before running command.
-    CONFIG_REQUIRED : False,
-  }
-  help_spec = {
-    # Name of command or auxiliary help info for which this help applies.
-    HELP_NAME : 'version',
-    # List of help name aliases.
-    HELP_NAME_ALIASES : ['ver'],
-    # Type of help:
-    HELP_TYPE : HelpType.COMMAND_HELP,
-    # One line summary of this help.
-    HELP_ONE_LINE_SUMMARY : 'Print version info about gsutil',
-    # The full help text.
-    HELP_TEXT : _detailed_help_text,
-  }
-
-  # Command entry point.
-  def RunCommand(self):
-    for path in BotoConfigLocations:
-      f = None
-      try:
-        f = open(path, 'r')
-        break
-      except IOError:
-        pass
-      finally:
-        if f:
-          f.close()
-        else:
-          path = "no config found"
-
-    try:
-      f = open(os.path.join(self.gsutil_bin_dir, 'CHECKSUM'))
-      shipped_checksum = f.read().strip()
-      f.close()
-    except IOError:
-      shipped_checksum = 'MISSING'
-    try:
-      cur_checksum = self._ComputeCodeChecksum()
-    except IOError:
-      cur_checksum = 'MISSING FILES'
-    if shipped_checksum == cur_checksum:
-      checksum_ok_str = 'OK'
-    else:
-      checksum_ok_str = '!= %s' % shipped_checksum
-    sys.stderr.write(
-        'gsutil version %s\nchecksum %s (%s)\n'
-        'boto version %s\npython version %s\n'
-        'config path: %s\ngsutil path: %s\n' % (
-        self.gsutil_ver, cur_checksum, checksum_ok_str,
-        boto.__version__, sys.version, path, os.path.realpath(sys.argv[0])))
-
-    return 0
-
-  def _ComputeCodeChecksum(self):
-    """
-    Computes a checksum of gsutil code so we can see if users locally modified
-    gsutil when requesting support. (It's fine for users to make local mods,
-    but when users ask for support we ask them to run a stock version of
-    gsutil so we can reduce possible variables.)
-    """
-    m = md5()
-    # Checksum gsutil and all .py files under gsutil bin (including bundled
-    # libs). Although we will eventually make gsutil allow use of a centrally
-    # installed boto (once boto shifts to more frequent releases), in that case
-    # the local copies still should not have any user modifications.
-    files_to_checksum = [os.path.join(self.gsutil_bin_dir, 'gsutil')]
-    for root, sub_folders, files in os.walk(self.gsutil_bin_dir):
-      for file in files:
-        if file[-3:] == '.py':
-          files_to_checksum.append(os.path.join(root, file))
-    # Sort to ensure consistent checksum build, no matter how os.walk
-    # orders the list.
-    for file in sorted(files_to_checksum):
-      f = open(file, 'r')
-      content = f.read()
-      content = re.sub(r'(\r\n|\r|\n)', '\n', content)
-      m.update(content)
-      f.close()
-    return m.hexdigest()